From: Grygorii Strashko <grygorii.strashko@ti.com>
To: <netdev@vger.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
Jiri Pirko <jiri@resnulli.us>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>,
Ivan Vecera <ivecera@redhat.com>,
Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v5 net-next 11/12] ARM: dts: am571x-idk: enable for new cpsw switch dev driver
Date: Thu, 24 Oct 2019 13:09:13 +0300 [thread overview]
Message-ID: <20191024100914.16840-12-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20191024100914.16840-1-grygorii.strashko@ti.com>
Add DT nodes for new cpsw switchdev driver for am571x-idk board for now to
enable testing of the new solution.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/am571x-idk.dts | 27 ++++++++++++++++++++++++
arch/arm/boot/dts/am572x-idk.dts | 5 +++++
arch/arm/boot/dts/am574x-idk.dts | 5 +++++
arch/arm/boot/dts/am57xx-idk-common.dtsi | 5 -----
4 files changed, 37 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0aaacea1d887..820ce3b60bb6 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -186,3 +186,30 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
+
+&mac_sw {
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+};
+
+&cpsw_port1 {
+ phy-handle = <ðphy0_sw>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ phy-handle = <ðphy1_sw>;
+ phy-mode = "rgmii";
+ ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+ ethphy0_sw: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1_sw: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index ea1c119feaa5..c3d966904d64 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -27,3 +27,8 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
+
+&mac {
+ status = "okay";
+ dual_emac;
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 7935d70874ce..fa0088025b2c 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -35,3 +35,8 @@
pinctrl-1 = <&mmc2_pins_default>;
pinctrl-2 = <&mmc2_pins_default>;
};
+
+&mac {
+ status = "okay";
+ dual_emac;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 423855a2a2d6..398721c7201c 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -363,11 +363,6 @@
ext-clk-src;
};
-&mac {
- status = "okay";
- dual_emac;
-};
-
&cpsw_emac0 {
phy-handle = <ðphy0>;
phy-mode = "rgmii";
--
2.17.1
next prev parent reply other threads:[~2019-10-24 10:10 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 10:09 [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 01/12] net: ethernet: ti: cpsw: allow untagged traffic on host port Grygorii Strashko
2019-10-27 10:02 ` kbuild test robot
2019-10-27 10:02 ` [RFC PATCH] net: ethernet: ti: cpsw: cpsw_ale_set_vlan_untag() can be static kbuild test robot
2019-10-24 10:09 ` [PATCH v5 net-next 02/12] net: ethernet: ti: cpsw: ale: modify vlan/mdb api for switchdev Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 03/12] net: ethernet: ti: cpsw: resolve build deps of cpsw drivers Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 04/12] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv Grygorii Strashko
2019-10-25 13:01 ` Andrew Lunn
2019-11-01 16:55 ` Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings Grygorii Strashko
2019-10-25 17:47 ` Florian Fainelli
2019-11-01 17:25 ` Grygorii Strashko
2019-11-01 17:36 ` Florian Fainelli
2019-11-01 20:40 ` Grygorii Strashko
2019-10-29 2:23 ` Andrew Lunn
2019-11-01 17:29 ` Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac Grygorii Strashko
2019-10-27 8:05 ` kbuild test robot
2019-10-29 12:24 ` Andrew Lunn
2019-11-01 20:16 ` Grygorii Strashko
2019-11-01 20:39 ` Andrew Lunn
2019-11-01 20:46 ` Grygorii Strashko
2019-11-01 20:59 ` Andrew Lunn
2019-10-29 12:32 ` Andrew Lunn
2019-11-01 20:34 ` Grygorii Strashko
2019-11-01 20:57 ` Andrew Lunn
2019-10-24 10:09 ` [PATCH v5 net-next 07/12] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch Grygorii Strashko
2019-10-27 11:22 ` [RFC PATCH] net: ethernet: ti: cpsw_port_offload_fwd_mark_update() can be static kbuild test robot
2019-10-27 11:22 ` [PATCH v5 net-next 07/12] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch kbuild test robot
2019-10-24 10:09 ` [PATCH v5 net-next 08/12] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 09/12] Documentation: networking: add cpsw switchdev based driver documentation Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 10/12] ARM: dts: dra7: add dt nodes for new cpsw switch dev driver Grygorii Strashko
2019-10-24 10:09 ` Grygorii Strashko [this message]
2019-10-24 10:09 ` [PATCH v5 net-next 12/12] arm: omap2plus_defconfig: enable new cpsw switchdev driver Grygorii Strashko
2019-10-24 16:05 ` [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver Tony Lindgren
2019-11-09 15:15 ` Grygorii Strashko
2019-11-11 17:08 ` Tony Lindgren
2019-11-12 9:48 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024100914.16840-12-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=ivecera@redhat.com \
--cc=jiri@resnulli.us \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).