linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH trivial] usb: Spelling s/enpoint/endpoint/
@ 2019-10-24 15:28 Geert Uytterhoeven
  2019-10-25  5:30 ` Minas Harutyunyan
  2019-10-25 19:27 ` Li Yang
  0 siblings, 2 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2019-10-24 15:28 UTC (permalink / raw)
  To: Minas Harutyunyan, Greg Kroah-Hartman, Li Yang, Felipe Balbi,
	Bin Liu, Jiri Kosina
  Cc: linux-usb, linux-kernel, Geert Uytterhoeven

Fix misspellings of "endpoint".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/usb/dwc2/core.h             | 2 +-
 drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++--
 drivers/usb/gadget/udc/mv_u3d.h     | 2 +-
 drivers/usb/musb/musb_gadget.c      | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index d08d070a0fb6f598..968e03b89d04d5d8 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -134,7 +134,7 @@ struct dwc2_hsotg_req;
  * @target_frame: Targeted frame num to setup next ISOC transfer
  * @frame_overrun: Indicates SOF number overrun in DSTS
  *
- * This is the driver's state for each registered enpoint, allowing it
+ * This is the driver's state for each registered endpoint, allowing it
  * to keep track of transactions that need doing. Each endpoint has a
  * lock to protect the state, to try and avoid using an overall lock
  * for the host controller as much as possible.
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
index 2c537a904ee73950..53ca0ff7c2cbd48c 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.h
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -333,8 +333,8 @@ struct qe_udc {
 	u32 resume_state;       /* USB state to resume*/
 	u32 usb_state;          /* USB current state */
 	u32 usb_next_state;     /* USB next state */
-	u32 ep0_state;          /* Enpoint zero state */
-	u32 ep0_dir;            /* Enpoint zero direction: can be
+	u32 ep0_state;          /* Endpoint zero state */
+	u32 ep0_dir;            /* Endpoint zero direction: can be
 				USB_DIR_IN or USB_DIR_OUT*/
 	u32 usb_sof_count;      /* SOF count */
 	u32 errors;             /* USB ERRORs count */
diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
index 982625b7197a0d9c..66b84f792f646bb9 100644
--- a/drivers/usb/gadget/udc/mv_u3d.h
+++ b/drivers/usb/gadget/udc/mv_u3d.h
@@ -138,7 +138,7 @@ struct mv_u3d_op_regs {
 	u32	doorbell;	/* doorbell register */
 };
 
-/* control enpoint enable registers */
+/* control endpoint enable registers */
 struct epxcr {
 	u32	epxoutcr0;	/* ep out control 0 register */
 	u32	epxoutcr1;	/* ep out control 1 register */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 2cb31fc0cd601eb4..f62ffaede1abba48 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 }
 
 /*
- * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
  * data but will queue requests.
  *
  * exported to ep0 code
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
* Re: [PATCH trivial] usb: Spelling s/enpoint/endpoint/
  2019-10-24 15:28 [PATCH trivial] usb: Spelling s/enpoint/endpoint/ Geert Uytterhoeven
@ 2019-10-25  5:30 ` Minas Harutyunyan
  2019-10-25 19:27 ` Li Yang
  1 sibling, 0 replies; 3+ messages in thread
From: Minas Harutyunyan @ 2019-10-25  5:30 UTC (permalink / raw)
  To: Geert Uytterhoeven, Greg Kroah-Hartman, Li Yang, Felipe Balbi,
	Bin Liu, Jiri Kosina
  Cc: linux-usb, linux-kernel



On 10/24/2019 7:28 PM, Geert Uytterhoeven wrote:
> Fix misspellings of "endpoint".
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Acked-by: Minas Harutyunyan <hminas@synopsys.com>

> ---
>   drivers/usb/dwc2/core.h             | 2 +-
>   drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++--
>   drivers/usb/gadget/udc/mv_u3d.h     | 2 +-
>   drivers/usb/musb/musb_gadget.c      | 2 +-
>   4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index d08d070a0fb6f598..968e03b89d04d5d8 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -134,7 +134,7 @@ struct dwc2_hsotg_req;
>    * @target_frame: Targeted frame num to setup next ISOC transfer
>    * @frame_overrun: Indicates SOF number overrun in DSTS
>    *
> - * This is the driver's state for each registered enpoint, allowing it
> + * This is the driver's state for each registered endpoint, allowing it
>    * to keep track of transactions that need doing. Each endpoint has a
>    * lock to protect the state, to try and avoid using an overall lock
>    * for the host controller as much as possible.
> diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
> index 2c537a904ee73950..53ca0ff7c2cbd48c 100644
> --- a/drivers/usb/gadget/udc/fsl_qe_udc.h
> +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
> @@ -333,8 +333,8 @@ struct qe_udc {
>   	u32 resume_state;       /* USB state to resume*/
>   	u32 usb_state;          /* USB current state */
>   	u32 usb_next_state;     /* USB next state */
> -	u32 ep0_state;          /* Enpoint zero state */
> -	u32 ep0_dir;            /* Enpoint zero direction: can be
> +	u32 ep0_state;          /* Endpoint zero state */
> +	u32 ep0_dir;            /* Endpoint zero direction: can be
>   				USB_DIR_IN or USB_DIR_OUT*/
>   	u32 usb_sof_count;      /* SOF count */
>   	u32 errors;             /* USB ERRORs count */
> diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
> index 982625b7197a0d9c..66b84f792f646bb9 100644
> --- a/drivers/usb/gadget/udc/mv_u3d.h
> +++ b/drivers/usb/gadget/udc/mv_u3d.h
> @@ -138,7 +138,7 @@ struct mv_u3d_op_regs {
>   	u32	doorbell;	/* doorbell register */
>   };
>   
> -/* control enpoint enable registers */
> +/* control endpoint enable registers */
>   struct epxcr {
>   	u32	epxoutcr0;	/* ep out control 0 register */
>   	u32	epxoutcr1;	/* ep out control 1 register */
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 2cb31fc0cd601eb4..f62ffaede1abba48 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
>   }
>   
>   /*
> - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
> + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
>    * data but will queue requests.
>    *
>    * exported to ep0 code
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread
* Re: [PATCH trivial] usb: Spelling s/enpoint/endpoint/
  2019-10-24 15:28 [PATCH trivial] usb: Spelling s/enpoint/endpoint/ Geert Uytterhoeven
  2019-10-25  5:30 ` Minas Harutyunyan
@ 2019-10-25 19:27 ` Li Yang
  1 sibling, 0 replies; 3+ messages in thread
From: Li Yang @ 2019-10-25 19:27 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Minas Harutyunyan, Greg Kroah-Hartman, Felipe Balbi, Bin Liu,
	Jiri Kosina, linux-usb, lkml

On Fri, Oct 25, 2019 at 1:09 PM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
>
> Fix misspellings of "endpoint".

It is amazing that we have the same typo in so many different drivers. :)

>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Acked-by: Li Yang <leoyang.li@nxp.com>

> ---
>  drivers/usb/dwc2/core.h             | 2 +-
>  drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++--
>  drivers/usb/gadget/udc/mv_u3d.h     | 2 +-
>  drivers/usb/musb/musb_gadget.c      | 2 +-
>  4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index d08d070a0fb6f598..968e03b89d04d5d8 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -134,7 +134,7 @@ struct dwc2_hsotg_req;
>   * @target_frame: Targeted frame num to setup next ISOC transfer
>   * @frame_overrun: Indicates SOF number overrun in DSTS
>   *
> - * This is the driver's state for each registered enpoint, allowing it
> + * This is the driver's state for each registered endpoint, allowing it
>   * to keep track of transactions that need doing. Each endpoint has a
>   * lock to protect the state, to try and avoid using an overall lock
>   * for the host controller as much as possible.
> diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
> index 2c537a904ee73950..53ca0ff7c2cbd48c 100644
> --- a/drivers/usb/gadget/udc/fsl_qe_udc.h
> +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
> @@ -333,8 +333,8 @@ struct qe_udc {
>         u32 resume_state;       /* USB state to resume*/
>         u32 usb_state;          /* USB current state */
>         u32 usb_next_state;     /* USB next state */
> -       u32 ep0_state;          /* Enpoint zero state */
> -       u32 ep0_dir;            /* Enpoint zero direction: can be
> +       u32 ep0_state;          /* Endpoint zero state */
> +       u32 ep0_dir;            /* Endpoint zero direction: can be
>                                 USB_DIR_IN or USB_DIR_OUT*/
>         u32 usb_sof_count;      /* SOF count */
>         u32 errors;             /* USB ERRORs count */
> diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
> index 982625b7197a0d9c..66b84f792f646bb9 100644
> --- a/drivers/usb/gadget/udc/mv_u3d.h
> +++ b/drivers/usb/gadget/udc/mv_u3d.h
> @@ -138,7 +138,7 @@ struct mv_u3d_op_regs {
>         u32     doorbell;       /* doorbell register */
>  };
>
> -/* control enpoint enable registers */
> +/* control endpoint enable registers */
>  struct epxcr {
>         u32     epxoutcr0;      /* ep out control 0 register */
>         u32     epxoutcr1;      /* ep out control 1 register */
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 2cb31fc0cd601eb4..f62ffaede1abba48 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
>  }
>
>  /*
> - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
> + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
>   * data but will queue requests.
>   *
>   * exported to ep0 code
> --
> 2.17.1
>

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-25 19:28 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-24 15:28 [PATCH trivial] usb: Spelling s/enpoint/endpoint/ Geert Uytterhoeven
2019-10-25  5:30 ` Minas Harutyunyan
2019-10-25 19:27 ` Li Yang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).