[PATCH 4.4 00/43] 4.4.201-stable review

[PATCH 4.4 00/43] 4.4.201-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.201 release.
There are 43 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.201-rc1

Tejun Heo <tj@kernel.org>
    cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    mm/filemap.c: don't initiate writeback if mapping has no dirty pages

Joakim Zhang <qiangqing.zhang@nxp.com>
    can: flexcan: disable completely the ECC mechanism

Wenwen Wang <wenwen@cs.uga.edu>
    e1000: fix memory leaks

Manfred Rudigier <manfred.rudigier@omicronenergy.com>
    igb: Fix constant media auto sense switching when no cable is connected

Trond Myklebust <trondmy@gmail.com>
    NFSv4: Don't allow a cached open with a revoked delegation

Jiangfeng Xiao <xiaojiangfeng@huawei.com>
    net: hisilicon: Fix "Trying to free already-free IRQ"

Nicholas Piggin <npiggin@gmail.com>
    scsi: qla2xxx: stop timer in shutdown path

Alan Stern <stern@rowland.harvard.edu>
    USB: Skip endpoints with 0 maxpacket length

Kim Phillips <kim.phillips@amd.com>
    perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity

Peter Chen <peter.chen@nxp.com>
    usb: gadget: configfs: fix concurrent issue between composite APIs

Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
    usb: gadget: composite: Fix possible double free memory bug

Cristian Birsan <cristian.birsan@microchip.com>
    usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.

Nikhil Badola <nikhil.badola@freescale.com>
    usb: fsl: Check memory resource before releasing it

Taehee Yoo <ap420073@gmail.com>
    bonding: fix unexpected IFF_BONDING bit unset

Eric Dumazet <edumazet@google.com>
    ipvs: move old_secure_tcp into struct netns_ipvs

Daniel Wagner <dwagner@suse.de>
    scsi: lpfc: Honor module parameter lpfc_use_adisc

Hannes Reinecke <hare@suse.com>
    scsi: qla2xxx: fixup incorrect usage of host_byte

Vidya Sagar <vidyas@nvidia.com>
    PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

Al Viro <viro@zeniv.linux.org.uk>
    configfs: fix a deadlock in configfs_symlink()

Gustavo A. R. Silva <garsilva@embeddedor.com>
    drivers: usb: usbip: Add missing break statement to switch

Johan Hovold <johan@kernel.org>
    can: peak_usb: fix slab info leak

Navid Emamdoost <navid.emamdoost@gmail.com>
    can: gs_usb: gs_can_open(): prevent memory leak

Stephane Grosjean <s.grosjean@peak-system.com>
    can: peak_usb: fix a potential out-of-sync while decoding packets

Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
    can: c_can: c_can_poll(): only read status register after status IRQ

Johan Hovold <johan@kernel.org>
    can: usb_8dev: fix use-after-free on disconnect

Dan Carpenter <dan.carpenter@oracle.com>
    netfilter: ipset: Fix an error code in ip_set_sockfn_get()

Lukas Wunner <lukas@wunner.de>
    netfilter: nf_tables: Align nft_expr private data to 64-bit

Alexandru Ardelean <alexandru.ardelean@analog.com>
    iio: imu: adis16480: make sure provided frequency is positive

Luis Henriques <lhenriques@suse.com>
    ceph: fix use-after-free in __ceph_remove_cap()

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix si_enable_smc_cac() failed issue

Jiri Olsa <jolsa@kernel.org>
    perf tools: Fix time sorting

Kevin Hao <haokexin@gmail.com>
    dump_stack: avoid the livelock of the dump_lock

Michal Hocko <mhocko@suse.com>
    mm, vmstat: hide /proc/pagetypeinfo from normal users

Mel Gorman <mgorman@techsingularity.net>
    mm, meminit: recalculate pcpu batch and high limits after init completes

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/ca0132 - Fix possible workqueue stall

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series

Pan Bian <bianpan2016@163.com>
    nfc: netlink: fix double device reference drop

Manish Chopra <manishc@marvell.com>
    qede: fix NULL pointer deref in __qede_remove()

Pan Bian <bianpan2016@163.com>
    NFC: st21nfca: fix double free

Pan Bian <bianpan2016@163.com>
    NFC: fdp: fix incorrect free object

Eric Dumazet <edumazet@google.com>
    net: fix data-race in neigh_event_send()

Oliver Neukum <oneukum@suse.com>
    CDC-NCM: handle incomplete transfer of MTU


-------------

Diffstat:

 Makefile                                         |   4 +-
 arch/x86/kernel/cpu/perf_event_amd_ibs.c         |   2 +-
 drivers/gpu/drm/radeon/si_dpm.c                  |   1 +
 drivers/iio/imu/adis16480.c                      |   5 +-
 drivers/net/bonding/bond_main.c                  |   6 +-
 drivers/net/can/c_can/c_can.c                    |  25 ++++--
 drivers/net/can/c_can/c_can.h                    |   1 +
 drivers/net/can/flexcan.c                        |   1 +
 drivers/net/can/usb/gs_usb.c                     |   1 +
 drivers/net/can/usb/peak_usb/pcan_usb.c          |  17 ++--
 drivers/net/can/usb/peak_usb/pcan_usb_core.c     |   2 +-
 drivers/net/can/usb/usb_8dev.c                   |   3 +-
 drivers/net/ethernet/hisilicon/hip04_eth.c       |   1 -
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c |   7 +-
 drivers/net/ethernet/intel/igb/igb_main.c        |   3 +-
 drivers/net/ethernet/qlogic/qede/qede_main.c     |  12 ++-
 drivers/net/usb/cdc_ncm.c                        |   6 +-
 drivers/nfc/fdp/i2c.c                            |   2 +-
 drivers/nfc/st21nfca/core.c                      |   1 +
 drivers/pci/host/pci-tegra.c                     |   7 +-
 drivers/scsi/lpfc/lpfc_nportdisc.c               |   4 +-
 drivers/scsi/qla2xxx/qla_bsg.c                   |   6 +-
 drivers/scsi/qla2xxx/qla_os.c                    |   4 +
 drivers/usb/core/config.c                        |   5 ++
 drivers/usb/gadget/composite.c                   |   4 +
 drivers/usb/gadget/configfs.c                    | 110 +++++++++++++++++++++--
 drivers/usb/gadget/udc/atmel_usba_udc.c          |   6 +-
 drivers/usb/gadget/udc/fsl_udc_core.c            |   2 +-
 drivers/usb/usbip/vhci_hcd.c                     |   1 +
 fs/ceph/caps.c                                   |  10 +--
 fs/configfs/symlink.c                            |  33 ++++++-
 fs/fs-writeback.c                                |   9 +-
 fs/nfs/delegation.c                              |  10 +++
 fs/nfs/delegation.h                              |   1 +
 fs/nfs/nfs4proc.c                                |   7 +-
 include/net/ip_vs.h                              |   1 +
 include/net/neighbour.h                          |   4 +-
 include/net/netfilter/nf_tables.h                |   3 +-
 lib/dump_stack.c                                 |   7 +-
 mm/filemap.c                                     |   3 +-
 mm/page_alloc.c                                  |  10 ++-
 mm/vmstat.c                                      |   2 +-
 net/netfilter/ipset/ip_set_core.c                |   8 +-
 net/netfilter/ipvs/ip_vs_ctl.c                   |  15 ++--
 net/nfc/netlink.c                                |   2 -
 sound/firewire/bebob/bebob_focusrite.c           |   3 +
 sound/pci/hda/patch_ca0132.c                     |   2 +-
 tools/perf/util/hist.c                           |   2 +-
 48 files changed, 298 insertions(+), 83 deletions(-)

[PATCH 4.4 01/43] CDC-NCM: handle incomplete transfer of MTU

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ]

A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.

V2: used sizeof as request by Alexander

Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cdc_ncm.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -533,8 +533,8 @@ static void cdc_ncm_set_dgram_size(struc
 	/* read current mtu value from device */
 	err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
 			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
-			      0, iface_no, &max_datagram_size, 2);
-	if (err < 0) {
+			      0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+	if (err < sizeof(max_datagram_size)) {
 		dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
 		goto out;
 	}
@@ -545,7 +545,7 @@ static void cdc_ncm_set_dgram_size(struc
 	max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
 	err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE,
 			       USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE,
-			       0, iface_no, &max_datagram_size, 2);
+			       0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
 	if (err < 0)
 		dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n");
 

[PATCH 4.4 02/43] net: fix data-race in neigh_event_send()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 1b53d64435d56902fc234ff2507142d971a09687 ]

KCSAN reported the following data-race [1]

The fix will also prevent the compiler from optimizing out
the condition.

[1]

BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output

write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
 neigh_event_send include/net/neighbour.h:443 [inline]
 neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
 neigh_output include/net/neighbour.h:511 [inline]
 ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
 ip_queue_xmit+0x45/0x60 include/net/ip.h:237
 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
 __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618

read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
 neigh_event_send include/net/neighbour.h:442 [inline]
 neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
 neigh_output include/net/neighbour.h:511 [inline]
 ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
 ip_queue_xmit+0x45/0x60 include/net/ip.h:237
 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
 __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/neighbour.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -425,8 +425,8 @@ static inline int neigh_event_send(struc
 {
 	unsigned long now = jiffies;
 	
-	if (neigh->used != now)
-		neigh->used = now;
+	if (READ_ONCE(neigh->used) != now)
+		WRITE_ONCE(neigh->used, now);
 	if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
 		return __neigh_event_send(neigh, skb);
 	return 0;

[PATCH 4.4 03/43] NFC: fdp: fix incorrect free object

[Greg Kroah-Hartman]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 517ce4e93368938b204451285e53014549804868 ]

The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/fdp/i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -268,7 +268,7 @@ static void fdp_nci_i2c_read_device_prop
 						  *fw_vsc_cfg, len);
 
 		if (r) {
-			devm_kfree(dev, fw_vsc_cfg);
+			devm_kfree(dev, *fw_vsc_cfg);
 			goto vsc_read_err;
 		}
 	} else {

[PATCH 4.4 04/43] NFC: st21nfca: fix double free

[Greg Kroah-Hartman]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 99a8efbb6e30b72ac98cecf81103f847abffb1e5 ]

The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nfc/st21nfca/core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/nfc/st21nfca/core.c
+++ b/drivers/nfc/st21nfca/core.c
@@ -726,6 +726,7 @@ static int st21nfca_hci_complete_target_
 							NFC_PROTO_FELICA_MASK;
 		} else {
 			kfree_skb(nfcid_skb);
+			nfcid_skb = NULL;
 			/* P2P in type A */
 			r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE,
 					ST21NFCA_RF_READER_F_NFCID1,

[PATCH 4.4 05/43] qede: fix NULL pointer deref in __qede_remove()

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ]

While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())

This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.

[  194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[  194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.360304] PGD 0
[  194.360325] Oops: 0000 [#1] SMP
[  194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[  194.361044]  qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[  194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[  194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[  194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[  194.361463] RIP: 0010:[<ffffffffc03553c4>]  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.361534] RSP: 0018:ffff9ceabebdfac0  EFLAGS: 00010282
[  194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[  194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[  194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[  194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[  194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[  194.361810] FS:  00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[  194.361865] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[  194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  194.362051] PKRU: 55555554
[  194.362073] Call Trace:
[  194.362109]  [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[  194.362180]  [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[  194.362240]  [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[  194.362285]  [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[  194.362343]  [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[  194.362388]  [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[  194.362450]  [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[  194.362496]  [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[  194.362534]  [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[  194.362599]  [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[  194.362658]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362709]  [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[  194.362754]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362803]  [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[  194.362854]  [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[  194.362904]  [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[  194.362956]  [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[  194.363010]  [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[  194.363066]  [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[  194.363107]  [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[  194.363146]  [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[  194.363196]  [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[  194.363253]  [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[  194.363304]  [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[  194.363343]  [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[  194.363387]  [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[  194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[  194.363712] RIP  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.363764]  RSP <ffff9ceabebdfac0>
[  194.363791] CR2: 00000000000008dc

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1465,8 +1465,16 @@ enum qede_remove_mode {
 static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
-	struct qede_dev *edev = netdev_priv(ndev);
-	struct qed_dev *cdev = edev->cdev;
+	struct qede_dev *edev;
+	struct qed_dev *cdev;
+
+	if (!ndev) {
+		dev_info(&pdev->dev, "Device has already been removed\n");
+		return;
+	}
+
+	edev = netdev_priv(ndev);
+	cdev = edev->cdev;
 
 	DP_INFO(edev, "Starting qede_remove\n");
 

[PATCH 4.4 06/43] nfc: netlink: fix double device reference drop

[Greg Kroah-Hartman]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 025ec40b81d785a98f76b8bdb509ac10773b4f12 ]

The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.

Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/netlink.c |    2 --
 1 file changed, 2 deletions(-)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1066,7 +1066,6 @@ static int nfc_genl_llc_set_params(struc
 
 	local = nfc_llcp_find_local(dev);
 	if (!local) {
-		nfc_put_device(dev);
 		rc = -ENODEV;
 		goto exit;
 	}
@@ -1126,7 +1125,6 @@ static int nfc_genl_llc_sdreq(struct sk_
 
 	local = nfc_llcp_find_local(dev);
 	if (!local) {
-		nfc_put_device(dev);
 		rc = -ENODEV;
 		goto exit;
 	}

[PATCH 4.4 07/43] ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 706ad6746a66546daf96d4e4a95e46faf6cf689a upstream.

For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.

Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.

This commit fixes the bug.

Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/bebob/bebob_focusrite.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/firewire/bebob/bebob_focusrite.c
+++ b/sound/firewire/bebob/bebob_focusrite.c
@@ -28,6 +28,8 @@
 #define SAFFIRE_CLOCK_SOURCE_SPDIF		1
 
 /* clock sources as returned from register of Saffire Pro 10 and 26 */
+#define SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK	0x000000ff
+#define SAFFIREPRO_CLOCK_SOURCE_DETECT_MASK	0x0000ff00
 #define SAFFIREPRO_CLOCK_SOURCE_INTERNAL	0
 #define SAFFIREPRO_CLOCK_SOURCE_SKIP		1 /* never used on hardware */
 #define SAFFIREPRO_CLOCK_SOURCE_SPDIF		2
@@ -190,6 +192,7 @@ saffirepro_both_clk_src_get(struct snd_b
 		map = saffirepro_clk_maps[1];
 
 	/* In a case that this driver cannot handle the value of register. */
+	value &= SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK;
 	if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
 		err = -EIO;
 		goto end;

[PATCH 4.4 08/43] ALSA: hda/ca0132 - Fix possible workqueue stall

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 15c2b3cc09a31620914955cb2a89c277c18ee999 upstream.

The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync().  It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.

Fix it by dropping the _sync but does call cancel_delayed_work()
instead.

Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_ca0132.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4440,7 +4440,7 @@ static void hp_callback(struct hda_codec
 	/* Delay enabling the HP amp, to let the mic-detection
 	 * state machine run.
 	 */
-	cancel_delayed_work_sync(&spec->unsol_hp_work);
+	cancel_delayed_work(&spec->unsol_hp_work);
 	schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
 	tbl = snd_hda_jack_tbl_get(codec, cb->nid);
 	if (tbl)

[PATCH 4.4 09/43] mm, meminit: recalculate pcpu batch and high limits after init completes

[Greg Kroah-Hartman]

From: Mel Gorman <mgorman@techsingularity.net>

commit 3e8fc0075e24338b1117cdff6a79477427b8dbed upstream.

Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list.  As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.

This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone.  A private report indicated that kernel build
times were excessive with extremely high system CPU usage.  A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.

This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system.  It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.

mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.

kernbench
                                5.4.0-rc3              5.4.0-rc3
                                  vanilla           resetpcpu-v2
Amean     user-256    13249.50 (   0.00%)    16401.31 * -23.79%*
Amean     syst-256    14760.30 (   0.00%)     4448.39 *  69.86%*
Amean     elsp-256      162.42 (   0.00%)      119.13 *  26.65%*
Stddev    user-256       42.97 (   0.00%)       19.15 (  55.43%)
Stddev    syst-256      336.87 (   0.00%)        6.71 (  98.01%)
Stddev    elsp-256        2.46 (   0.00%)        0.39 (  84.03%)

                   5.4.0-rc3    5.4.0-rc3
                     vanilla resetpcpu-v2
Duration User       39766.24     49221.79
Duration System     44298.10     13361.67
Duration Elapsed      519.11       388.87

The patch reduces system CPU usage by 69.86% and total build time by
26.65%.  The variance of system CPU usage is also much reduced.

Before, this was the breakdown of batch and high values over all zones
was:

    256               batch: 1
    256               batch: 63
    512               batch: 7
    256               high:  0
    256               high:  378
    512               high:  42

512 pcpu pagesets had a batch limit of 7 and a high limit of 42.  After
the patch:

    256               batch: 1
    768               batch: 63
    256               high:  0
    768               high:  378

[mgorman@techsingularity.net: fix merge/linkage snafu]
  Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>	[4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2010,6 +2010,14 @@ void drain_all_pages(struct zone *zone)
 	int cpu;
 
 	/*
+	 * The number of managed pages has changed due to the initialisation
+	 * so the pcpu batch and high limits needs to be updated or the limits
+	 * will be artificially small.
+	 */
+	for_each_populated_zone(zone)
+		zone_pcp_update(zone);
+
+	/*
 	 * Allocate in the BSS so we wont require allocation in
 	 * direct reclaim path for CONFIG_CPUMASK_OFFSTACK=y
 	 */
@@ -6868,7 +6876,6 @@ void free_contig_range(unsigned long pfn
 }
 #endif
 
-#ifdef CONFIG_MEMORY_HOTPLUG
 /*
  * The zone indicated has a new number of managed_pages; batch sizes and percpu
  * page high values need to be recalulated.
@@ -6882,7 +6889,6 @@ void __meminit zone_pcp_update(struct zo
 				per_cpu_ptr(zone->pageset, cpu));
 	mutex_unlock(&pcp_batch_high_lock);
 }
-#endif
 
 void zone_pcp_reset(struct zone *zone)
 {

[PATCH 4.4 10/43] mm, vmstat: hide /proc/pagetypeinfo from normal users

[Greg Kroah-Hartman]

From: Michal Hocko <mhocko@suse.com>

commit abaed0112c1db08be15a784a2c5c8a8b3063cdd3 upstream.

/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation.  It is not very useful for any
other use so normal users really do not need to read this file.

Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.

Reduce both issues by simply not exporting the file to regular users.

Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmstat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1589,7 +1589,7 @@ static int __init setup_vmstat(void)
 #endif
 #ifdef CONFIG_PROC_FS
 	proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
-	proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
+	proc_create("pagetypeinfo", 0400, NULL, &pagetypeinfo_file_ops);
 	proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations);
 	proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
 #endif

[PATCH 4.4 11/43] dump_stack: avoid the livelock of the dump_lock

[Greg Kroah-Hartman]

From: Kevin Hao <haokexin@gmail.com>

commit 5cbf2fff3bba8d3c6a4d47c1754de1cf57e2b01f upstream.

In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem.  We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg().  This will definitely mitigate
the thundering herd problem.  Thanks Linus for the suggestion.

[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/dump_stack.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -44,7 +44,12 @@ retry:
 		was_locked = 1;
 	} else {
 		local_irq_restore(flags);
-		cpu_relax();
+		/*
+		 * Wait for the lock to release before jumping to
+		 * atomic_cmpxchg() in order to mitigate the thundering herd
+		 * problem.
+		 */
+		do { cpu_relax(); } while (atomic_read(&dump_lock) != -1);
 		goto retry;
 	}
 

[PATCH 4.4 12/43] perf tools: Fix time sorting

[Greg Kroah-Hartman]

From: Jiri Olsa <jolsa@kernel.org>

commit 722ddfde366fd46205456a9c5ff9b3359dc9a75e upstream.

The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.

Check the following report for longer workloads:

  $ perf report -s time -F time,overhead --stdio

Fix hist_entry__sort() to properly return int64_t and not possible cut
int.

Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/hist.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1080,7 +1080,7 @@ void hists__collapse_resort(struct hists
 	}
 }
 
-static int hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
+static int64_t hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
 {
 	struct perf_hpp_fmt *fmt;
 	int64_t cmp = 0;

[PATCH 4.4 13/43] drm/radeon: fix si_enable_smc_cac() failed issue

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit 2c409ba81be25516afe05ae27a4a15da01740b01 upstream.

Need to set the dte flag on this asic.

Port the fix from amdgpu:
5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")

Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/si_dpm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -1956,6 +1956,7 @@ static void si_initialize_powertune_defa
 		case 0x682C:
 			si_pi->cac_weights = cac_weights_cape_verde_pro;
 			si_pi->dte_data = dte_data_sun_xt;
+			update_dte_from_pl2 = true;
 			break;
 		case 0x6825:
 		case 0x6827:

[PATCH 4.4 14/43] ceph: fix use-after-free in __ceph_remove_cap()

[Greg Kroah-Hartman]

From: Luis Henriques <lhenriques@suse.com>

commit ea60ed6fcf29eebc78f2ce91491e6309ee005a01 upstream.

KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:

[  293.903362]  kasan_report+0xe/0x20
[  293.903365]  rb_erase+0x1f/0x790
[  293.903370]  __ceph_remove_cap+0x201/0x370
[  293.903375]  __ceph_remove_caps+0x4b/0x70
[  293.903380]  ceph_evict_inode+0x4e/0x360
[  293.903386]  evict+0x169/0x290
[  293.903390]  __dentry_kill+0x16f/0x250
[  293.903394]  dput+0x1c6/0x440
[  293.903398]  __fput+0x184/0x330
[  293.903404]  task_work_run+0xb9/0xe0
[  293.903410]  exit_to_usermode_loop+0xd3/0xe0
[  293.903413]  do_syscall_64+0x1a0/0x1c0
[  293.903417]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with

	rb_erase(&cap->ci_node, &ci->i_caps);

And, when this finally happens, the use-after-free will occur.

This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.

Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ceph/caps.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -926,6 +926,11 @@ void __ceph_remove_cap(struct ceph_cap *
 
 	dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
 
+	/* remove from inode's cap rbtree, and clear auth cap */
+	rb_erase(&cap->ci_node, &ci->i_caps);
+	if (ci->i_auth_cap == cap)
+		ci->i_auth_cap = NULL;
+
 	/* remove from session list */
 	spin_lock(&session->s_cap_lock);
 	if (session->s_cap_iterator == cap) {
@@ -961,11 +966,6 @@ void __ceph_remove_cap(struct ceph_cap *
 
 	spin_unlock(&session->s_cap_lock);
 
-	/* remove from inode list */
-	rb_erase(&cap->ci_node, &ci->i_caps);
-	if (ci->i_auth_cap == cap)
-		ci->i_auth_cap = NULL;
-
 	if (removed)
 		ceph_put_cap(mdsc, cap);
 

[PATCH 4.4 15/43] iio: imu: adis16480: make sure provided frequency is positive

[Greg Kroah-Hartman]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

commit 24e1eb5c0d78cfb9750b690bbe997d4d59170258 upstream.

It could happen that either `val` or `val2` [provided from userspace] is
negative. In that case the computed frequency could get a weird value.

Fix this by checking that neither of the 2 variables is negative, and check
that the computed result is not-zero.

Fixes: e4f959390178 ("iio: imu: adis16480 switch sampling frequency attr to core support")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16480.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -266,8 +266,11 @@ static int adis16480_set_freq(struct iio
 	struct adis16480 *st = iio_priv(indio_dev);
 	unsigned int t;
 
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
 	t =  val * 1000 + val2 / 1000;
-	if (t <= 0)
+	if (t == 0)
 		return -EINVAL;
 
 	t = 2460000 / t;

[PATCH 4.4 16/43] netfilter: nf_tables: Align nft_expr private data to 64-bit

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 250367c59e6ba0d79d702a059712d66edacd4a1a upstream.

Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:

 # nft add table ip test-ip4
 # nft add chain ip test-ip4 output { type filter hook output priority 0; }
 # nft add rule  ip test-ip4 output quota 1025 bytes

Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<7f4473fc>] (nft_quota_do_init [nft_quota])
[<7f447448>] (nft_quota_init [nft_quota])
[<7f4260d0>] (nf_tables_newrule [nf_tables])
[<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<8078b334>] (netlink_unicast)
[<8078b664>] (netlink_sendmsg)
[<8071b47c>] (sock_sendmsg)
[<8071bd18>] (___sys_sendmsg)
[<8071ce3c>] (__sys_sendmsg)
[<8071ce94>] (sys_sendmsg)

The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/netfilter/nf_tables.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -648,7 +648,8 @@ struct nft_expr_ops {
  */
 struct nft_expr {
 	const struct nft_expr_ops	*ops;
-	unsigned char			data[];
+	unsigned char			data[]
+		__attribute__((aligned(__alignof__(u64))));
 };
 
 static inline void *nft_expr_priv(const struct nft_expr *expr)

[PATCH 4.4 17/43] netfilter: ipset: Fix an error code in ip_set_sockfn_get()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 30b7244d79651460ff114ba8f7987ed94c86b99a upstream.

The copy_to_user() function returns the number of bytes remaining to be
copied.  In this code, that positive return is checked at the end of the
function and we return zero/success.  What we should do instead is
return -EFAULT.

Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipset/ip_set_core.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1930,8 +1930,9 @@ ip_set_sockfn_get(struct sock *sk, int o
 		}
 
 		req_version->version = IPSET_PROTOCOL;
-		ret = copy_to_user(user, req_version,
-				   sizeof(struct ip_set_req_version));
+		if (copy_to_user(user, req_version,
+				 sizeof(struct ip_set_req_version)))
+			ret = -EFAULT;
 		goto done;
 	}
 	case IP_SET_OP_GET_BYNAME: {
@@ -1988,7 +1989,8 @@ ip_set_sockfn_get(struct sock *sk, int o
 	}	/* end of switch(op) */
 
 copy:
-	ret = copy_to_user(user, data, copylen);
+	if (copy_to_user(user, data, copylen))
+		ret = -EFAULT;
 
 done:
 	vfree(data);

[PATCH 4.4 18/43] can: usb_8dev: fix use-after-free on disconnect

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3759739426186a924675651b388d1c3963c5710e upstream.

The driver was accessing its driver data after having freed it.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable <stable@vger.kernel.org>     # 3.9
Cc: Bernd Krumboeck <b.krumboeck@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/usb_8dev.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -1010,9 +1010,8 @@ static void usb_8dev_disconnect(struct u
 		netdev_info(priv->netdev, "device disconnected\n");
 
 		unregister_netdev(priv->netdev);
-		free_candev(priv->netdev);
-
 		unlink_all_urbs(priv);
+		free_candev(priv->netdev);
 	}
 
 }

[PATCH 4.4 19/43] can: c_can: c_can_poll(): only read status register after status IRQ

[Greg Kroah-Hartman]

From: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>

commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.

When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.

It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.

Thanks to Wolfgang and Joe for bringing up the first idea.

Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Joe Burmeister <joe.burmeister@devtank.co.uk>
Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/c_can/c_can.c |   25 ++++++++++++++++++++-----
 drivers/net/can/c_can/c_can.h |    1 +
 2 files changed, 21 insertions(+), 5 deletions(-)

--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -97,6 +97,9 @@
 #define BTR_TSEG2_SHIFT		12
 #define BTR_TSEG2_MASK		(0x7 << BTR_TSEG2_SHIFT)
 
+/* interrupt register */
+#define INT_STS_PENDING		0x8000
+
 /* brp extension register */
 #define BRP_EXT_BRPE_MASK	0x0f
 #define BRP_EXT_BRPE_SHIFT	0
@@ -1029,10 +1032,16 @@ static int c_can_poll(struct napi_struct
 	u16 curr, last = priv->last_status;
 	int work_done = 0;
 
-	priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
-	/* Ack status on C_CAN. D_CAN is self clearing */
-	if (priv->type != BOSCH_D_CAN)
-		priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+	/* Only read the status register if a status interrupt was pending */
+	if (atomic_xchg(&priv->sie_pending, 0)) {
+		priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+		/* Ack status on C_CAN. D_CAN is self clearing */
+		if (priv->type != BOSCH_D_CAN)
+			priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+	} else {
+		/* no change detected ... */
+		curr = last;
+	}
 
 	/* handle state changes */
 	if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
@@ -1083,10 +1092,16 @@ static irqreturn_t c_can_isr(int irq, vo
 {
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct c_can_priv *priv = netdev_priv(dev);
+	int reg_int;
 
-	if (!priv->read_reg(priv, C_CAN_INT_REG))
+	reg_int = priv->read_reg(priv, C_CAN_INT_REG);
+	if (!reg_int)
 		return IRQ_NONE;
 
+	/* save for later use */
+	if (reg_int & INT_STS_PENDING)
+		atomic_set(&priv->sie_pending, 1);
+
 	/* disable all interrupts and schedule the NAPI */
 	c_can_irq_control(priv, false);
 	napi_schedule(&priv->napi);
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -198,6 +198,7 @@ struct c_can_priv {
 	struct net_device *dev;
 	struct device *device;
 	atomic_t tx_active;
+	atomic_t sie_pending;
 	unsigned long tx_dir;
 	int last_status;
 	u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);

[PATCH 4.4 20/43] can: peak_usb: fix a potential out-of-sync while decoding packets

[Greg Kroah-Hartman]

From: Stephane Grosjean <s.grosjean@peak-system.com>

commit de280f403f2996679e2607384980703710576fed upstream.

When decoding a buffer received from PCAN-USB, the first timestamp read in
a packet is a 16-bit coded time base, and the next ones are an 8-bit
offset to this base, regardless of the type of packet read.

This patch corrects a potential loss of synchronization by using a
timestamp index read from the buffer, rather than an index of received
data packets, to determine on the sizeof the timestamp to be read from the
packet being decoded.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/peak_usb/pcan_usb.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -108,7 +108,7 @@ struct pcan_usb_msg_context {
 	u8 *end;
 	u8 rec_cnt;
 	u8 rec_idx;
-	u8 rec_data_idx;
+	u8 rec_ts_idx;
 	struct net_device *netdev;
 	struct pcan_usb *pdev;
 };
@@ -552,10 +552,15 @@ static int pcan_usb_decode_status(struct
 	mc->ptr += PCAN_USB_CMD_ARGS;
 
 	if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
-		int err = pcan_usb_decode_ts(mc, !mc->rec_idx);
+		int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx);
 
 		if (err)
 			return err;
+
+		/* Next packet in the buffer will have a timestamp on a single
+		 * byte
+		 */
+		mc->rec_ts_idx++;
 	}
 
 	switch (f) {
@@ -638,10 +643,13 @@ static int pcan_usb_decode_data(struct p
 
 	cf->can_dlc = get_can_dlc(rec_len);
 
-	/* first data packet timestamp is a word */
-	if (pcan_usb_decode_ts(mc, !mc->rec_data_idx))
+	/* Only first packet timestamp is a word */
+	if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx))
 		goto decode_failed;
 
+	/* Next packet in the buffer will have a timestamp on a single byte */
+	mc->rec_ts_idx++;
+
 	/* read data */
 	memset(cf->data, 0x0, sizeof(cf->data));
 	if (status_len & PCAN_USB_STATUSLEN_RTR) {
@@ -695,7 +703,6 @@ static int pcan_usb_decode_msg(struct pe
 		/* handle normal can frames here */
 		} else {
 			err = pcan_usb_decode_data(&mc, sl);
-			mc.rec_data_idx++;
 		}
 	}
 

[PATCH 4.4 21/43] can: gs_usb: gs_can_open(): prevent memory leak

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream.

In gs_can_open() if usb_submit_urb() fails the allocated urb should be
released.

Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/gs_usb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -617,6 +617,7 @@ static int gs_can_open(struct net_device
 					   rc);
 
 				usb_unanchor_urb(urb);
+				usb_free_urb(urb);
 				break;
 			}
 

[PATCH 4.4 22/43] can: peak_usb: fix slab info leak

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream.

Fix a small slab info leak due to a failure to clear the command buffer
at allocation.

The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <stable@vger.kernel.org>     # 3.4
Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -776,7 +776,7 @@ static int peak_usb_create_dev(const str
 	dev = netdev_priv(netdev);
 
 	/* allocate a buffer large enough to send commands */
-	dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
+	dev->cmd_buf = kzalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
 	if (!dev->cmd_buf) {
 		err = -ENOMEM;
 		goto lbl_free_candev;

[PATCH 4.4 23/43] drivers: usb: usbip: Add missing break statement to switch

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <garsilva@embeddedor.com>

commit 7c92e5fbf4dac0dd4dd41a0383adc54f16f403e2 upstream.

Add missing break statement to prevent the code for case
USB_PORT_FEAT_C_RESET falling through to the default case.

Addresses-Coverity-ID: 143155
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/vhci_hcd.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -303,6 +303,7 @@ static int vhci_hub_control(struct usb_h
 			default:
 				break;
 			}
+			break;
 		default:
 			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 					  wValue);

[PATCH 4.4 24/43] configfs: fix a deadlock in configfs_symlink()

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 351e5d869e5ac10cb40c78b5f2d7dfc816ad4587 upstream.

Configfs abuses symlink(2).  Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done.  The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.

Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after.  However, that invalidates the checks done
by the caller of ->symlink(), so we have to
	* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
	* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
	* recheck the permissions on the parent directory.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/configfs/symlink.c |   33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -157,11 +157,42 @@ int configfs_symlink(struct inode *dir,
 	    !type->ct_item_ops->allow_link)
 		goto out_put;
 
+	/*
+	 * This is really sick.  What they wanted was a hybrid of
+	 * link(2) and symlink(2) - they wanted the target resolved
+	 * at syscall time (as link(2) would've done), be a directory
+	 * (which link(2) would've refused to do) *AND* be a deep
+	 * fucking magic, making the target busy from rmdir POV.
+	 * symlink(2) is nothing of that sort, and the locking it
+	 * gets matches the normal symlink(2) semantics.  Without
+	 * attempts to resolve the target (which might very well
+	 * not even exist yet) done prior to locking the parent
+	 * directory.  This perversion, OTOH, needs to resolve
+	 * the target, which would lead to obvious deadlocks if
+	 * attempted with any directories locked.
+	 *
+	 * Unfortunately, that garbage is userland ABI and we should've
+	 * said "no" back in 2005.  Too late now, so we get to
+	 * play very ugly games with locking.
+	 *
+	 * Try *ANYTHING* of that sort in new code, and you will
+	 * really regret it.  Just ask yourself - what could a BOFH
+	 * do to me and do I want to find it out first-hand?
+	 *
+	 *  AV, a thoroughly annoyed bastard.
+	 */
+	inode_unlock(dir);
 	ret = get_target(symname, &path, &target_item, dentry->d_sb);
+	inode_lock(dir);
 	if (ret)
 		goto out_put;
 
-	ret = type->ct_item_ops->allow_link(parent_item, target_item);
+	if (dentry->d_inode || d_unhashed(dentry))
+		ret = -EEXIST;
+	else
+		ret = inode_permission(dir, MAY_WRITE | MAY_EXEC);
+	if (!ret)
+		ret = type->ct_item_ops->allow_link(parent_item, target_item);
 	if (!ret) {
 		mutex_lock(&configfs_symlink_mutex);
 		ret = create_link(parent_item, target_item, dentry);

[PATCH 4.4 25/43] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

[Greg Kroah-Hartman]

From: Vidya Sagar <vidyas@nvidia.com>

commit 7be142caabc4780b13a522c485abc806de5c4114 upstream.

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/host/pci-tegra.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -586,12 +586,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NV
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
 
-/* Tegra PCIE requires relaxed ordering */
+/* Tegra20 and Tegra30 PCIE requires relaxed ordering */
 static void tegra_pcie_relax_enable(struct pci_dev *dev)
 {
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
 
 static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 {

[PATCH 4.4 26/43] scsi: qla2xxx: fixup incorrect usage of host_byte

[Greg Kroah-Hartman]

From: Hannes Reinecke <hare@suse.com>

[ Upstream commit 66cf50e65b183c863825f5c28a818e3f47a72e40 ]

DRIVER_ERROR is a a driver byte setting, not a host byte.  The qla2xxx
driver should rather return DID_ERROR here to be in line with the other
drivers.

Link: https://lore.kernel.org/r/20191018140458.108278-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_bsg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index c26acde797f0d..2d5375d677367 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -252,7 +252,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job)
 	srb_t *sp;
 	const char *type;
 	int req_sg_cnt, rsp_sg_cnt;
-	int rval =  (DRIVER_ERROR << 16);
+	int rval =  (DID_ERROR << 16);
 	uint16_t nextlid = 0;
 
 	if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) {
@@ -426,7 +426,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
 	struct Scsi_Host *host = bsg_job->shost;
 	scsi_qla_host_t *vha = shost_priv(host);
 	struct qla_hw_data *ha = vha->hw;
-	int rval = (DRIVER_ERROR << 16);
+	int rval = (DID_ERROR << 16);
 	int req_sg_cnt, rsp_sg_cnt;
 	uint16_t loop_id;
 	struct fc_port *fcport;
@@ -1910,7 +1910,7 @@ qlafx00_mgmt_cmd(struct fc_bsg_job *bsg_job)
 	struct Scsi_Host *host = bsg_job->shost;
 	scsi_qla_host_t *vha = shost_priv(host);
 	struct qla_hw_data *ha = vha->hw;
-	int rval = (DRIVER_ERROR << 16);
+	int rval = (DID_ERROR << 16);
 	struct qla_mt_iocb_rqst_fx00 *piocb_rqst;
 	srb_t *sp;
 	int req_sg_cnt = 0, rsp_sg_cnt = 0;
-- 
2.20.1

[PATCH 4.4 27/43] scsi: lpfc: Honor module parameter lpfc_use_adisc

[Greg Kroah-Hartman]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ]

The initial lpfc_desc_set_adisc implementation in commit
dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if

	cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE

In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to

	(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE

and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to

	(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)

A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.

[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000

[mkp: fixed Hannes' email]

Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <james.smart@broadcom.com>
Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 193733e8c8235..3a4613f9fb9fc 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -759,9 +759,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	if (!(vport->fc_flag & FC_PT2PT)) {
 		/* Check config parameter use-adisc or FCP-2 */
-		if ((vport->cfg_use_adisc && (vport->fc_flag & FC_RSCN_MODE)) ||
+		if (vport->cfg_use_adisc && ((vport->fc_flag & FC_RSCN_MODE) ||
 		    ((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) &&
-		     (ndlp->nlp_type & NLP_FCP_TARGET))) {
+		     (ndlp->nlp_type & NLP_FCP_TARGET)))) {
 			spin_lock_irq(shost->host_lock);
 			ndlp->nlp_flag |= NLP_NPR_ADISC;
 			spin_unlock_irq(shost->host_lock);
-- 
2.20.1

[PATCH 4.4 28/43] ipvs: move old_secure_tcp into struct netns_ipvs

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit c24b75e0f9239e78105f81c5f03a751641eb07ef ]

syzbot reported the following issue :

BUG: KCSAN: data-race in update_defense_level / update_defense_level

read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
 update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
 update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler

Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.

Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip_vs.h            |  1 +
 net/netfilter/ipvs/ip_vs_ctl.c | 15 +++++++--------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index a6cc576fd467f..b0156f8a9ab7f 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -880,6 +880,7 @@ struct netns_ipvs {
 	struct delayed_work	defense_work;   /* Work handler */
 	int			drop_rate;
 	int			drop_counter;
+	int			old_secure_tcp;
 	atomic_t		dropentry;
 	/* locks in ctl.c */
 	spinlock_t		dropentry_lock;  /* drop entry handling */
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 56c62b65923f1..b176f76dfaa14 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -97,7 +97,6 @@ static bool __ip_vs_addr_is_local_v6(struct net *net,
 static void update_defense_level(struct netns_ipvs *ipvs)
 {
 	struct sysinfo i;
-	static int old_secure_tcp = 0;
 	int availmem;
 	int nomem;
 	int to_change = -1;
@@ -178,35 +177,35 @@ static void update_defense_level(struct netns_ipvs *ipvs)
 	spin_lock(&ipvs->securetcp_lock);
 	switch (ipvs->sysctl_secure_tcp) {
 	case 0:
-		if (old_secure_tcp >= 2)
+		if (ipvs->old_secure_tcp >= 2)
 			to_change = 0;
 		break;
 	case 1:
 		if (nomem) {
-			if (old_secure_tcp < 2)
+			if (ipvs->old_secure_tcp < 2)
 				to_change = 1;
 			ipvs->sysctl_secure_tcp = 2;
 		} else {
-			if (old_secure_tcp >= 2)
+			if (ipvs->old_secure_tcp >= 2)
 				to_change = 0;
 		}
 		break;
 	case 2:
 		if (nomem) {
-			if (old_secure_tcp < 2)
+			if (ipvs->old_secure_tcp < 2)
 				to_change = 1;
 		} else {
-			if (old_secure_tcp >= 2)
+			if (ipvs->old_secure_tcp >= 2)
 				to_change = 0;
 			ipvs->sysctl_secure_tcp = 1;
 		}
 		break;
 	case 3:
-		if (old_secure_tcp < 2)
+		if (ipvs->old_secure_tcp < 2)
 			to_change = 1;
 		break;
 	}
-	old_secure_tcp = ipvs->sysctl_secure_tcp;
+	ipvs->old_secure_tcp = ipvs->sysctl_secure_tcp;
 	if (to_change >= 0)
 		ip_vs_protocol_timeout_change(ipvs,
 					      ipvs->sysctl_secure_tcp > 1);
-- 
2.20.1

[PATCH 4.4 29/43] bonding: fix unexpected IFF_BONDING bit unset

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ]

The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.

bond0<--bond1

Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond1 master bond0
    ip link set bond1 nomaster
    ip link del bond1 type bond
    ip link add bond1 type bond

Splat looks like:
[  226.665555] proc_dir_entry 'bonding/bond1' already registered
[  226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[  226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[  226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[  226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[  226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[  226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[  226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[  226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[  226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[  226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[  226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[  226.680758] FS:  00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  226.681886] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[  226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  226.685681] Call Trace:
[  226.687089]  proc_create_seq_private+0xb3/0xf0
[  226.687778]  bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[  226.691458]  bond_netdev_event+0x433/0x970 [bonding]
[  226.692139]  ? __module_text_address+0x13/0x140
[  226.692779]  notifier_call_chain+0x90/0x160
[  226.693401]  register_netdevice+0x9b3/0xd80
[  226.694010]  ? alloc_netdev_mqs+0x854/0xc10
[  226.694629]  ? netdev_change_features+0xa0/0xa0
[  226.695278]  ? rtnl_create_link+0x2ed/0xad0
[  226.695849]  bond_newlink+0x2a/0x60 [bonding]
[  226.696422]  __rtnl_newlink+0xb9f/0x11b0
[  226.696968]  ? rtnl_link_unregister+0x220/0x220
[ ... ]

Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 1bf4f54c2befb..e31b4c7d2522b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1719,7 +1719,8 @@ err_detach:
 	slave_disable_netpoll(new_slave);
 
 err_close:
-	slave_dev->priv_flags &= ~IFF_BONDING;
+	if (!netif_is_bond_master(slave_dev))
+		slave_dev->priv_flags &= ~IFF_BONDING;
 	dev_close(slave_dev);
 
 err_restore_mac:
@@ -1915,7 +1916,8 @@ static int __bond_release_one(struct net_device *bond_dev,
 
 	dev_set_mtu(slave_dev, slave->original_mtu);
 
-	slave_dev->priv_flags &= ~IFF_BONDING;
+	if (!netif_is_bond_master(slave_dev))
+		slave_dev->priv_flags &= ~IFF_BONDING;
 
 	bond_free_slave(slave);
 
-- 
2.20.1

[PATCH 4.4 30/43] usb: fsl: Check memory resource before releasing it

[Greg Kroah-Hartman]

From: Nikhil Badola <nikhil.badola@freescale.com>

[ Upstream commit bc1e3a2dd0c9954fd956ac43ca2876bbea018c01 ]

Check memory resource existence before releasing it to avoid NULL
pointer dereference

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 8991a40707926..bd98557caa280 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2570,7 +2570,7 @@ static int fsl_udc_remove(struct platform_device *pdev)
 	dma_pool_destroy(udc_controller->td_pool);
 	free_irq(udc_controller->irq, udc_controller);
 	iounmap(dr_regs);
-	if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
+	if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE))
 		release_mem_region(res->start, resource_size(res));
 
 	/* free udc --wait for the release() finished */
-- 
2.20.1

[PATCH 4.4 31/43] usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.

[Greg Kroah-Hartman]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit ba3a1a915c49cc3023e4ddfc88f21e7514e82aa4 ]

Fix interrupt storm generated by endpoints when working in FIFO mode.
The TX_COMPLETE interrupt is used only by control endpoints processing.
Do not enable it for other types of endpoints.

Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 585cb8734f509..668ac5e8681b5 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -403,9 +403,11 @@ static void submit_request(struct usba_ep *ep, struct usba_request *req)
 		next_fifo_transaction(ep, req);
 		if (req->last_transaction) {
 			usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-			usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+			if (ep_is_control(ep))
+				usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
 		} else {
-			usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+			if (ep_is_control(ep))
+				usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
 			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
 		}
 	}
-- 
2.20.1

[PATCH 4.4 32/43] usb: gadget: composite: Fix possible double free memory bug

[Greg Kroah-Hartman]

From: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>

[ Upstream commit 1c20c89b0421b52b2417bb0f62a611bc669eda1d ]

composite_dev_cleanup call from the failure of configfs_composite_bind
frees up the cdev->os_desc_req and cdev->req. If the previous calls of
bind and unbind is successful these will carry stale values.

Consider the below sequence of function calls:
configfs_composite_bind()
        composite_dev_prepare()
                - Allocate cdev->req, cdev->req->buf
        composite_os_desc_req_prepare()
                - Allocate cdev->os_desc_req, cdev->os_desc_req->buf
configfs_composite_unbind()
        composite_dev_cleanup()
                - free the cdev->os_desc_req->buf and cdev->req->buf
Next composition switch
configfs_composite_bind()
        - If it fails goto err_comp_cleanup will call the
	  composite_dev_cleanup() function
        composite_dev_cleanup()
	        - calls kfree up with the stale values of cdev->req->buf and
		  cdev->os_desc_req from the previous configfs_composite_bind
		  call. The free call on these stale values leads to double free.

Hence, Fix this issue by setting request and buffer pointer to NULL after
kfree.

Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 351a406b97af7..0f2d1e98481fb 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -2068,14 +2068,18 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev)
 			usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req);
 
 		kfree(cdev->os_desc_req->buf);
+		cdev->os_desc_req->buf = NULL;
 		usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req);
+		cdev->os_desc_req = NULL;
 	}
 	if (cdev->req) {
 		if (cdev->setup_pending)
 			usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
 
 		kfree(cdev->req->buf);
+		cdev->req->buf = NULL;
 		usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+		cdev->req = NULL;
 	}
 	cdev->next_string_id = 0;
 	device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
-- 
2.20.1

[PATCH 4.4 33/43] usb: gadget: configfs: fix concurrent issue between composite APIs

[Greg Kroah-Hartman]

From: Peter Chen <peter.chen@nxp.com>

[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]

We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.

In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.

Several oops:

oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic)
Mem abort info:
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000                                                          [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00

X7: 0xffff8008f27a9c10:
9c10  00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30  00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50  00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70  00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90  00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0  f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0  870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0  019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
 00000000

X8: 0xffff8008f2a98a10:
8a10  00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30  eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50  f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70  fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90  080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

X21: 0xffff8008f7a8b3a8:
b3a8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408  00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448  0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468  e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488  f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000

X24: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

X28: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18

oops2:
composite_disconnect: Calling disconnect on a Gadget that is                      not connected
android_work: did not send uevent (0 0           (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e

X20: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
 ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X21: 0xffff8008f2d98314:
8314  ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334  00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374  00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394  e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4  ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4  ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4  ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000

X23: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X28: 0xffff8008f2349b80:
9b80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00  00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20  0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40  00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60  00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000

Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80:                                   000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/configfs.c | 110 ++++++++++++++++++++++++++++++++--
 1 file changed, 105 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index d412e234f336a..f91a43140694b 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -62,6 +62,8 @@ struct gadget_info {
 	bool use_os_desc;
 	char b_vendor_code;
 	char qw_sign[OS_STRING_QW_SIGN_LEN];
+	spinlock_t spinlock;
+	bool unbind;
 };
 
 static inline struct gadget_info *to_gadget_info(struct config_item *item)
@@ -1246,6 +1248,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
 	int				ret;
 
 	/* the gi->lock is hold by the caller */
+	gi->unbind = 0;
 	cdev->gadget = gadget;
 	set_gadget_data(gadget, cdev);
 	ret = composite_dev_prepare(composite, cdev);
@@ -1378,31 +1381,128 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev;
 	struct gadget_info		*gi;
+	unsigned long flags;
 
 	/* the gi->lock is hold by the caller */
 
 	cdev = get_gadget_data(gadget);
 	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	gi->unbind = 1;
+	spin_unlock_irqrestore(&gi->spinlock, flags);
 
 	kfree(otg_desc[0]);
 	otg_desc[0] = NULL;
 	purge_configs_funcs(gi);
 	composite_dev_cleanup(cdev);
 	usb_ep_autoconfig_reset(cdev->gadget);
+	spin_lock_irqsave(&gi->spinlock, flags);
 	cdev->gadget = NULL;
 	set_gadget_data(gadget, NULL);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static int configfs_composite_setup(struct usb_gadget *gadget,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+	int ret;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return 0;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return 0;
+	}
+
+	ret = composite_setup(gadget, ctrl);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+	return ret;
+}
+
+static void configfs_composite_disconnect(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_disconnect(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_suspend(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_suspend(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_resume(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev *cdev;
+	struct gadget_info *gi;
+	unsigned long flags;
+
+	cdev = get_gadget_data(gadget);
+	if (!cdev)
+		return;
+
+	gi = container_of(cdev, struct gadget_info, cdev);
+	spin_lock_irqsave(&gi->spinlock, flags);
+	cdev = get_gadget_data(gadget);
+	if (!cdev || gi->unbind) {
+		spin_unlock_irqrestore(&gi->spinlock, flags);
+		return;
+	}
+
+	composite_resume(gadget);
+	spin_unlock_irqrestore(&gi->spinlock, flags);
 }
 
 static const struct usb_gadget_driver configfs_driver_template = {
 	.bind           = configfs_composite_bind,
 	.unbind         = configfs_composite_unbind,
 
-	.setup          = composite_setup,
-	.reset          = composite_disconnect,
-	.disconnect     = composite_disconnect,
+	.setup          = configfs_composite_setup,
+	.reset          = configfs_composite_disconnect,
+	.disconnect     = configfs_composite_disconnect,
 
-	.suspend	= composite_suspend,
-	.resume		= composite_resume,
+	.suspend	= configfs_composite_suspend,
+	.resume		= configfs_composite_resume,
 
 	.max_speed	= USB_SPEED_SUPER,
 	.driver = {
-- 
2.20.1

[PATCH 4.4 34/43] perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity

[Greg Kroah-Hartman]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit 317b96bb14303c7998dbcd5bc606bd8038fdd4b4 ]

The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.

Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238cd76 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/perf_event_amd_ibs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -555,7 +555,7 @@ static int perf_ibs_handle_irq(struct pe
 	if (event->attr.sample_type & PERF_SAMPLE_RAW)
 		offset_max = perf_ibs->offset_max;
 	else if (check_rip)
-		offset_max = 2;
+		offset_max = 3;
 	else
 		offset_max = 1;
 	do {

[PATCH 4.4 35/43] USB: Skip endpoints with 0 maxpacket length

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

[ Upstream commit d482c7bb0541d19dea8bff437a9f3c5563b5b2d2 ]

Endpoints with a maxpacket length of 0 are probably useless.  They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.

Currently the USB core does not check for endpoints having a maxpacket
value of 0.  This patch adds a check, printing a warning and skipping
over any endpoints it catches.

Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>

Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/config.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 5abc4e5434ecf..cbd064fae23bd 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -314,6 +314,11 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 
 	/* Validate the wMaxPacketSize field */
 	maxp = usb_endpoint_maxp(&endpoint->desc);
+	if (maxp == 0) {
+		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has wMaxPacketSize 0, skipping\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
 
 	/* Find the highest legal maxpacket size for this endpoint */
 	i = 0;		/* additional transactions per microframe */
-- 
2.20.1

[PATCH 4.4 36/43] scsi: qla2xxx: stop timer in shutdown path

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit d3566abb1a1e7772116e4d50fb6a58d19c9802e5 ]

In shutdown/reboot paths, the timer is not stopped:

  qla2x00_shutdown
  pci_device_shutdown
  device_shutdown
  kernel_restart_prepare
  kernel_restart
  sys_reboot

This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.

Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ff5df33fc7405..611a127f08d82 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2962,6 +2962,10 @@ qla2x00_shutdown(struct pci_dev *pdev)
 	/* Stop currently executing firmware. */
 	qla2x00_try_to_stop_firmware(vha);
 
+	/* Disable timer */
+	if (vha->timer_active)
+		qla2x00_stop_timer(vha);
+
 	/* Turn adapter off line */
 	vha->flags.online = 0;
 
-- 
2.20.1

[PATCH 4.4 37/43] net: hisilicon: Fix "Trying to free already-free IRQ"

[Greg Kroah-Hartman]

From: Jiangfeng Xiao <xiaojiangfeng@huawei.com>

[ Upstream commit 63a41746827cb16dc6ad0d4d761ab4e7dda7a0c3 ]

When rmmod hip04_eth.ko, we can get the following warning:

Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G           O    4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---

Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index e8b7dc1bcfa6e..2a7dfac205464 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -950,7 +950,6 @@ static int hip04_remove(struct platform_device *pdev)
 
 	hip04_free_ring(ndev, d);
 	unregister_netdev(ndev);
-	free_irq(ndev->irq, ndev);
 	of_node_put(priv->phy_node);
 	cancel_work_sync(&priv->tx_timeout_task);
 	free_netdev(ndev);
-- 
2.20.1

[PATCH 4.4 38/43] NFSv4: Dont allow a cached open with a revoked delegation

[Greg Kroah-Hartman]

From: Trond Myklebust <trondmy@gmail.com>

[ Upstream commit be3df3dd4c70ee020587a943a31b98a0fb4b6424 ]

If the delegation is marked as being revoked, we must not use it
for cached opens.

Fixes: 869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/delegation.c | 10 ++++++++++
 fs/nfs/delegation.h |  1 +
 fs/nfs/nfs4proc.c   |  7 ++-----
 3 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 7af5eeabc80e1..5dac3382405ce 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -52,6 +52,16 @@ nfs4_is_valid_delegation(const struct nfs_delegation *delegation,
 	return false;
 }
 
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode)
+{
+	struct nfs_delegation *delegation;
+
+	delegation = rcu_dereference(NFS_I(inode)->delegation);
+	if (nfs4_is_valid_delegation(delegation, 0))
+		return delegation;
+	return NULL;
+}
+
 static int
 nfs4_do_check_delegation(struct inode *inode, fmode_t flags, bool mark)
 {
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index 333063e032f01..26a8af7bdca36 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -58,6 +58,7 @@ int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state
 int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state, const nfs4_stateid *stateid);
 bool nfs4_copy_delegation_stateid(nfs4_stateid *dst, struct inode *inode, fmode_t flags);
 
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode);
 void nfs_mark_delegation_referenced(struct nfs_delegation *delegation);
 int nfs4_have_delegation(struct inode *inode, fmode_t flags);
 int nfs4_check_delegation(struct inode *inode, fmode_t flags);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 900a62a9ad4e5..08207001d4753 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1243,8 +1243,6 @@ static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode,
 		return 0;
 	if ((delegation->type & fmode) != fmode)
 		return 0;
-	if (test_bit(NFS_DELEGATION_RETURNING, &delegation->flags))
-		return 0;
 	switch (claim) {
 	case NFS4_OPEN_CLAIM_NULL:
 	case NFS4_OPEN_CLAIM_FH:
@@ -1473,7 +1471,6 @@ static void nfs4_return_incompatible_delegation(struct inode *inode, fmode_t fmo
 static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
 {
 	struct nfs4_state *state = opendata->state;
-	struct nfs_inode *nfsi = NFS_I(state->inode);
 	struct nfs_delegation *delegation;
 	int open_mode = opendata->o_arg.open_flags;
 	fmode_t fmode = opendata->o_arg.fmode;
@@ -1490,7 +1487,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
 		}
 		spin_unlock(&state->owner->so_lock);
 		rcu_read_lock();
-		delegation = rcu_dereference(nfsi->delegation);
+		delegation = nfs4_get_valid_delegation(state->inode);
 		if (!can_open_delegated(delegation, fmode, claim)) {
 			rcu_read_unlock();
 			break;
@@ -1981,7 +1978,7 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
 		if (can_open_cached(data->state, data->o_arg.fmode, data->o_arg.open_flags))
 			goto out_no_action;
 		rcu_read_lock();
-		delegation = rcu_dereference(NFS_I(data->state->inode)->delegation);
+		delegation = nfs4_get_valid_delegation(data->state->inode);
 		if (can_open_delegated(delegation, data->o_arg.fmode, claim))
 			goto unlock_no_action;
 		rcu_read_unlock();
-- 
2.20.1

[PATCH 4.4 39/43] igb: Fix constant media auto sense switching when no cable is connected

[Greg Kroah-Hartman]

From: Manfred Rudigier <manfred.rudigier@omicronenergy.com>

[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ]

At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.

If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.

The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 70ed5e5c35147..9404f38d9d0d0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1673,7 +1673,8 @@ static void igb_check_swap_media(struct igb_adapter *adapter)
 	if ((hw->phy.media_type == e1000_media_type_copper) &&
 	    (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
 		swap_now = true;
-	} else if (!(connsw & E1000_CONNSW_SERDESD)) {
+	} else if ((hw->phy.media_type != e1000_media_type_copper) &&
+		   !(connsw & E1000_CONNSW_SERDESD)) {
 		/* copper signal takes time to appear */
 		if (adapter->copper_tries < 4) {
 			adapter->copper_tries++;
-- 
2.20.1

[PATCH 4.4 40/43] e1000: fix memory leaks

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 8472ba62154058b64ebb83d5f57259a352d28697 ]

In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index d70b2e5d52228..cbb0bdf851770 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -628,6 +628,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		rxdr[i].count = rxdr->count;
 
+	err = 0;
 	if (netif_running(adapter->netdev)) {
 		/* Try to get new resources before deleting old */
 		err = e1000_setup_all_rx_resources(adapter);
@@ -648,14 +649,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		adapter->rx_ring = rxdr;
 		adapter->tx_ring = txdr;
 		err = e1000_up(adapter);
-		if (err)
-			goto err_setup;
 	}
 	kfree(tx_old);
 	kfree(rx_old);
 
 	clear_bit(__E1000_RESETTING, &adapter->flags);
-	return 0;
+	return err;
+
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
@@ -667,7 +667,6 @@ err_alloc_rx:
 err_alloc_tx:
 	if (netif_running(adapter->netdev))
 		e1000_up(adapter);
-err_setup:
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return err;
 }
-- 
2.20.1

[PATCH 4.4 41/43] can: flexcan: disable completely the ECC mechanism

[Greg Kroah-Hartman]

From: Joakim Zhang <qiangqing.zhang@nxp.com>

[ Upstream commit 5e269324db5adb2f5f6ec9a93a9c7b0672932b47 ]

The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.

Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/flexcan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -923,6 +923,7 @@ static int flexcan_chip_start(struct net
 		reg_mecr = flexcan_read(&regs->mecr);
 		reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
 		flexcan_write(reg_mecr, &regs->mecr);
+		reg_mecr |= FLEXCAN_MECR_ECCDIS;
 		reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
 			      FLEXCAN_MECR_FANCEI_MSK);
 		flexcan_write(reg_mecr, &regs->mecr);

[PATCH 4.4 42/43] mm/filemap.c: dont initiate writeback if mapping has no dirty pages

[Greg Kroah-Hartman]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

commit c3aab9a0bd91b696a852169479b7db1ece6cbf8c upstream.

Functions like filemap_write_and_wait_range() should do nothing if inode
has no dirty pages or pages currently under writeback.  But they anyway
construct struct writeback_control and this does some atomic operations if
CONFIG_CGROUP_WRITEBACK=y - on fast path it locks inode->i_lock and
updates state of writeback ownership, on slow path might be more work.
Current this path is safely avoided only when inode mapping has no pages.

For example generic_file_read_iter() calls filemap_write_and_wait_range()
at each O_DIRECT read - pretty hot path.

This patch skips starting new writeback if mapping has no dirty tags set.
If writeback is already in progress filemap_write_and_wait_range() will
wait for it.

Link: http://lkml.kernel.org/r/156378816804.1087.8607636317907921438.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/filemap.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -340,7 +340,8 @@ int __filemap_fdatawrite_range(struct ad
 		.range_end = end,
 	};
 
-	if (!mapping_cap_writeback_dirty(mapping))
+	if (!mapping_cap_writeback_dirty(mapping) ||
+	    !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
 		return 0;
 
 	wbc_attach_fdatawrite_inode(&wbc, mapping->host);

[PATCH 4.4 43/43] cgroup,writeback: dont switch wbs immediately on dead wbs if the memcg is dead

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

commit 65de03e251382306a4575b1779c57c87889eee49 upstream.

cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead.  This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).

Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups.  When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.

While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages.  However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.

Skip the immediate switching if the associated memcg is dying.

This is a simplified version of the following two patches:

 * https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/
 * http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz

Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fs-writeback.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -582,10 +582,13 @@ void wbc_attach_and_unlock_inode(struct
 	spin_unlock(&inode->i_lock);
 
 	/*
-	 * A dying wb indicates that the memcg-blkcg mapping has changed
-	 * and a new wb is already serving the memcg.  Switch immediately.
+	 * A dying wb indicates that either the blkcg associated with the
+	 * memcg changed or the associated memcg is dying.  In the first
+	 * case, a replacement wb should already be available and we should
+	 * refresh the wb immediately.  In the second case, trying to
+	 * refresh will keep failing.
 	 */
-	if (unlikely(wb_dying(wbc->wb)))
+	if (unlikely(wb_dying(wbc->wb) && !css_is_dying(wbc->wb->memcg_css)))
 		inode_switch_wbs(inode, wbc->wb_id);
 }
 

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Guenter Roeck]

On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
> 

I am getting lots of

WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
scripts/Makefile.modpost:97: recipe for target 'vmlinux.o' failed

for v4.4.y, v4.9.y, and v4.14.y.

Bisecting in v4.4.y points to commit 13e9ce202ddcf95bf6 ("mm, meminit:
recalculate pcpu batch and high limits after init completes"). Reverting
it fixes the problem in all three branches.

Guenter

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[kernelci.org bot]

stable-rc/linux-4.4.y boot: 84 boots: 7 failed, 68 passed with 7 offline, 2 conflicts (v4.4.200-44-g92b9901ba23d)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.200-44-g92b9901ba23d/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.200-44-g92b9901ba23d/

Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.200-44-g92b9901ba23d
Git Commit: 92b9901ba23dbd26e916a393e557a5ffec117124
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 42 unique boards, 17 SoC families, 13 builds out of 190

Boot Failures Detected:

arm:
    multi_v7_defconfig:
        gcc-8:
            exynos4412-odroidx2: 1 failed lab
            exynos5422-odroidxu3: 2 failed labs
            rk3288-rock2-square: 1 failed lab
            rk3288-veyron-jaq: 1 failed lab
            tegra124-jetson-tk1: 1 failed lab
            tegra124-nyan-big: 1 failed lab

Offline Platforms:

arm:

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab

Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

arm:
    multi_v7_defconfig:
        exynos5800-peach-pi:
            lab-collabora: FAIL (gcc-8)
            lab-baylibre-seattle: PASS (gcc-8)

x86_64:
    x86_64_defconfig:
        qemu_x86_64:
            lab-collabora: PASS (gcc-8)
            lab-baylibre: FAIL (gcc-8)

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Greg Kroah-Hartman]

On Mon, Nov 11, 2019 at 03:35:40PM -0800, Guenter Roeck wrote:
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.201 release.
> > There are 43 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> > 
> 
> I am getting lots of
> 
> WARNING: modpost: Found 2 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> FATAL: modpost: Section mismatches detected.
> Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
> scripts/Makefile.modpost:97: recipe for target 'vmlinux.o' failed
> 
> for v4.4.y, v4.9.y, and v4.14.y.
> 
> Bisecting in v4.4.y points to commit 13e9ce202ddcf95bf6 ("mm, meminit:
> recalculate pcpu batch and high limits after init completes"). Reverting
> it fixes the problem in all three branches.

Wow that patch was backported incorrectly, gotta love quilt at times :(

I've dropped that from all 3 of those trees and will work to backport it
"correctly" by hand for a later release.  I'll go release -rc2 for all 3
of those trees now.

thanks,

greg k-h

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Greg Kroah-Hartman]

On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz

-rc2 is out:
 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Jon Hunter]

On 12/11/2019 05:27, Greg Kroah-Hartman wrote:
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.4.201 release.
>> There are 43 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
> 
> -rc2 is out:
>  	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz
> 


All tests for Tegra are passing ...

Test results for stable-v4.4:
    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    19 tests:	19 pass, 0 fail

Linux version:	4.4.201-rc2-gca1d1b5f0f2a
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Naresh Kamboju]

On Tue, 12 Nov 2019 at 11:02, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.201 release.
> > There are 43 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >       https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
>
> -rc2 is out:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.201-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: ca1d1b5f0f2acd3d552c3c74f44d984d06f2d595
git describe: v4.4.200-43-gca1d1b5f0f2a
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.200-43-gca1d1b5f0f2a


No regressions (compared to build v4.4.200)

No fixes (compared to build v4.4.200)

Ran 19919 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kvm-unit-tests
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-none
* prep-tmp-disk
* ssuite

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.4 00/43] 4.4.201-stable review

[Guenter Roeck]

On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
> 

For -rc2:

Build results:
	total: 170 pass: 170 fail: 0
Qemu test results:
	total: 324 pass: 324 fail: 0

Guenter