From: kbuild test robot <lkp@intel.com>
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: kbuild-all@lists.01.org, Qiang Zhao <qiang.zhao@nxp.com>,
Li Yang <leoyang.li@nxp.com>,
Christophe Leroy <christophe.leroy@c-s.fr>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Scott Wood <oss@buserror.net>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>
Subject: Re: [PATCH v3 36/36] soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
Date: Fri, 15 Nov 2019 21:31:24 +0800 [thread overview]
Message-ID: <201911152105.ojcD68ZC%lkp@intel.com> (raw)
In-Reply-To: <20191101124210.14510-37-linux@rasmusvillemoes.dk>
Hi Rasmus,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.4-rc7 next-20191114]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rasmus-Villemoes/QUICC-Engine-support-on-ARM/20191102-234436
base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 1204c70d9dcba31164f78ad5d8c88c42335d51f8
reproduce:
# apt-get install sparse
# sparse version: v0.6.1-32-g233d4e1-dirty
make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/soc/fsl/qe/ucc_slow.c:78:17: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct ucc_slow *us_regs @@ got struct ucc_slow [nstruct ucc_slow *us_regs @@
>> drivers/soc/fsl/qe/ucc_slow.c:78:17: sparse: expected struct ucc_slow *us_regs
>> drivers/soc/fsl/qe/ucc_slow.c:78:17: sparse: got struct ucc_slow [noderef] <asn:2> *us_regs
>> drivers/soc/fsl/qe/ucc_slow.c:81:18: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
>> drivers/soc/fsl/qe/ucc_slow.c:81:18: sparse: expected void [noderef] <asn:2> *
>> drivers/soc/fsl/qe/ucc_slow.c:81:18: sparse: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:90:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:90:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:90:9: sparse: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:99:17: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct ucc_slow *us_regs @@ got struct ucc_slow [nstruct ucc_slow *us_regs @@
drivers/soc/fsl/qe/ucc_slow.c:99:17: sparse: expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:99:17: sparse: got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:102:18: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:102:18: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:102:18: sparse: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:111:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:111:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:111:9: sparse: got restricted __be32 *
>> drivers/soc/fsl/qe/ucc_slow.c:169:28: sparse: sparse: Using plain integer as NULL pointer
>> drivers/soc/fsl/qe/ucc_slow.c:171:25: sparse: sparse: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:172:25: sparse: sparse: cast removes address space '<asn:2>' of expression
>> drivers/soc/fsl/qe/ucc_slow.c:191:23: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct ucc_slow_pram *us_pram @@ got vostruct ucc_slow_pram *us_pram @@
>> drivers/soc/fsl/qe/ucc_slow.c:191:23: sparse: expected struct ucc_slow_pram *us_pram
>> drivers/soc/fsl/qe/ucc_slow.c:191:23: sparse: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:201:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:201:9: sparse: expected void [noderef] <asn:2> *
>> drivers/soc/fsl/qe/ucc_slow.c:201:9: sparse: got restricted __be16 *
>> drivers/soc/fsl/qe/ucc_slow.c:228:41: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct qe_bd *tx_bd @@ got void [nodestruct qe_bd *tx_bd @@
>> drivers/soc/fsl/qe/ucc_slow.c:228:41: sparse: expected struct qe_bd *tx_bd
drivers/soc/fsl/qe/ucc_slow.c:228:41: sparse: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:231:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:231:17: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:231:17: sparse: got restricted __be32 *
>> drivers/soc/fsl/qe/ucc_slow.c:233:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got uvoid [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:233:17: sparse: expected void [noderef] <asn:2> *
>> drivers/soc/fsl/qe/ucc_slow.c:233:17: sparse: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:237:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:237:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:237:9: sparse: got restricted __be32 *
>> drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] @@ got restrunsigned int [usertype] @@
>> drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: expected unsigned int [usertype]
>> drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got uvoid [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:238:9: sparse: got unsigned int [usertype] *
>> drivers/soc/fsl/qe/ucc_slow.c:241:26: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct qe_bd *rx_bd @@ got void [nodestruct qe_bd *rx_bd @@
>> drivers/soc/fsl/qe/ucc_slow.c:241:26: sparse: expected struct qe_bd *rx_bd
drivers/soc/fsl/qe/ucc_slow.c:241:26: sparse: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:244:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got uvoid [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:244:17: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:244:17: sparse: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:246:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:246:17: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:246:17: sparse: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] @@ got restrunsigned int [usertype] @@
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: expected unsigned int [usertype]
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got uvoid [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:250:9: sparse: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:251:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:251:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:251:9: sparse: got restricted __be32 *
>> drivers/soc/fsl/qe/ucc_slow.c:275:39: sparse: sparse: mixing different enum types:
>> drivers/soc/fsl/qe/ucc_slow.c:275:39: sparse: unsigned int enum ucc_slow_tx_oversampling_rate
>> drivers/soc/fsl/qe/ucc_slow.c:275:39: sparse: unsigned int enum ucc_slow_rx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:295:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:295:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:295:9: sparse: got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:296:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/soc/fsl/qe/ucc_slow.c:296:9: sparse: expected void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:296:9: sparse: got restricted __be16 *
--
>> drivers/tty/serial/ucc_uart.c:264:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
>> drivers/tty/serial/ucc_uart.c:264:21: sparse: expected void [noderef] <asn:2> *
>> drivers/tty/serial/ucc_uart.c:264:21: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:268:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:268:21: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:268:21: sparse: got restricted __be16 *
>> drivers/tty/serial/ucc_uart.c:286:6: sparse: sparse: symbol 'qe_uart_set_mctrl' was not declared. Should it be static?
drivers/tty/serial/ucc_uart.c:349:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:349:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:349:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:350:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:350:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:350:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:350:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:350:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:350:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:352:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:352:21: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:352:21: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:371:18: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:371:18: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:371:18: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:384:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:384:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:384:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:385:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:385:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:385:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:385:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:385:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:385:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:388:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:388:21: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:388:21: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:476:26: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:476:26: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:476:26: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:483:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:483:21: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:483:21: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:514:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:514:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:514:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:514:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:514:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:514:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:517:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:517:21: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:517:21: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:608:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:608:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:608:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:609:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:609:17: sparse: expected void [noderef] <asn:2> *
>> drivers/tty/serial/ucc_uart.c:609:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:610:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:610:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:610:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:616:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:616:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:616:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:617:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:617:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:617:9: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:618:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:618:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:618:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:629:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:629:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:629:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:630:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:630:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:630:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:631:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:631:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:631:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:641:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:641:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:641:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:642:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:642:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:642:9: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:643:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:643:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:643:9: sparse: got restricted __be16 *
>> drivers/tty/serial/ucc_uart.c:657:46: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected struct ucc_uart_pram *uccup @@ got struct ucc_uart_prstruct ucc_uart_pram *uccup @@
>> drivers/tty/serial/ucc_uart.c:657:46: sparse: expected struct ucc_uart_pram *uccup
>> drivers/tty/serial/ucc_uart.c:657:46: sparse: got struct ucc_uart_pram [noderef] <asn:2> *uccup
>> drivers/tty/serial/ucc_uart.c:665:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:665:9: sparse: expected void [noderef] <asn:2> *
>> drivers/tty/serial/ucc_uart.c:665:9: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:666:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:666:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:666:9: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:667:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:667:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:667:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:668:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:668:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:668:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:669:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:669:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:669:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:670:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:670:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:670:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:671:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:671:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:671:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:672:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:672:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:672:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:673:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:673:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:673:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:674:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:674:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:674:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:675:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:675:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:675:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:676:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:676:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:676:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:678:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:678:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:678:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:679:9: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:679:9: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:679:9: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:717:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:717:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:717:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:718:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:718:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:718:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:719:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:719:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:719:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:720:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:720:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:720:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:721:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:721:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:721:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:722:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:722:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:722:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:723:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:723:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:723:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:724:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:724:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:724:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:725:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:725:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:725:17: sparse: got restricted __be32 *
drivers/tty/serial/ucc_uart.c:726:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:726:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:726:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:728:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:728:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:728:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:730:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:730:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:730:17: sparse: got restricted __be16 *
drivers/tty/serial/ucc_uart.c:731:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got eref] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:731:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:731:17: sparse: got unsigned char *
drivers/tty/serial/ucc_uart.c:732:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void [noderef] <asn:2> * @@ got [noderef] <asn:2> * @@
drivers/tty/serial/ucc_uart.c:732:17: sparse: expected void [noderef] <asn:2> *
drivers/tty/serial/ucc_uart.c:732:17: sparse: got restricted __be16 *
>> drivers/tty/serial/ucc_uart.c:1004:24: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct ucc_uart_pram [noderef] <asn:2> *uccup @@ got am [noderef] <asn:2> *uccup @@
>> drivers/tty/serial/ucc_uart.c:1004:24: sparse: expected struct ucc_uart_pram [noderef] <asn:2> *uccup
>> drivers/tty/serial/ucc_uart.c:1004:24: sparse: got struct ucc_uart_pram *
vim +78 drivers/soc/fsl/qe/ucc_slow.c
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 72
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 73 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 74 {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 75 struct ucc_slow *us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 76 u32 gumr_l;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 77
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @78 us_regs = uccs->us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 79
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 80 /* Enable reception and/or transmission on this UCC. */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @81 gumr_l = qe_ioread32be(&us_regs->gumr_l);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 82 if (mode & COMM_DIR_TX) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 83 gumr_l |= UCC_SLOW_GUMR_L_ENT;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 84 uccs->enabled_tx = 1;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 85 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 86 if (mode & COMM_DIR_RX) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 87 gumr_l |= UCC_SLOW_GUMR_L_ENR;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 88 uccs->enabled_rx = 1;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 89 }
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 90 qe_iowrite32be(gumr_l, &us_regs->gumr_l);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 91 }
845cf505cebd15 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2008-01-09 92 EXPORT_SYMBOL(ucc_slow_enable);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 93
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 94 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 95 {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 96 struct ucc_slow *us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 97 u32 gumr_l;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 98
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @99 us_regs = uccs->us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 100
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 101 /* Disable reception and/or transmission on this UCC. */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @102 gumr_l = qe_ioread32be(&us_regs->gumr_l);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 103 if (mode & COMM_DIR_TX) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 104 gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 105 uccs->enabled_tx = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 106 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 107 if (mode & COMM_DIR_RX) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 108 gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 109 uccs->enabled_rx = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 110 }
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @111 qe_iowrite32be(gumr_l, &us_regs->gumr_l);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 112 }
845cf505cebd15 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2008-01-09 113 EXPORT_SYMBOL(ucc_slow_disable);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 114
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 115 /* Initialize the UCC for Slow operations
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 116 *
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 117 * The caller should initialize the following us_info
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 118 */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 119 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 120 {
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 121 struct ucc_slow_private *uccs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 122 u32 i;
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 123 struct ucc_slow __iomem *us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 124 u32 gumr;
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 125 struct qe_bd *bd;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 126 u32 id;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 127 u32 command;
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 128 int ret = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 129
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 130 if (!us_info)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 131 return -EINVAL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 132
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 133 /* check if the UCC port number is in range. */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 134 if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 135 printk(KERN_ERR "%s: illegal UCC number\n", __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 136 return -EINVAL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 137 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 138
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 139 /*
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 140 * Set mrblr
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 141 * Check that 'max_rx_buf_length' is properly aligned (4), unless
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 142 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 143 * case when QE accepts 32 bits at a time.
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 144 */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 145 if ((!us_info->rfw) &&
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 146 (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 147 printk(KERN_ERR "max_rx_buf_length not aligned.\n");
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 148 return -EINVAL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 149 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 150
f8485350c22b25 arch/powerpc/sysdev/qe_lib/ucc_slow.c Yan Burman 2006-12-02 151 uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 152 if (!uccs) {
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 153 printk(KERN_ERR "%s: Cannot allocate private data\n",
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 154 __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 155 return -ENOMEM;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 156 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 157
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 158 /* Fill slow UCC structure */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 159 uccs->us_info = us_info;
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 160 /* Set the PHY base address */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 161 uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 162 if (uccs->us_regs == NULL) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 163 printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
61a4e9e91dd391 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2008-08-20 164 kfree(uccs);
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 165 return -ENOMEM;
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 166 }
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 167
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 168 uccs->saved_uccm = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @169 uccs->p_rx_frame = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 170 us_regs = uccs->us_regs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @171 uccs->p_ucce = (u16 *) & (us_regs->ucce);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 172 uccs->p_uccm = (u16 *) & (us_regs->uccm);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 173 #ifdef STATISTICS
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 174 uccs->rx_frames = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 175 uccs->tx_frames = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 176 uccs->rx_discarded = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 177 #endif /* STATISTICS */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 178
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 179 /* Get PRAM base */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 180 uccs->us_pram_offset =
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 181 qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
4c35630ccda56e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-05-08 182 if (IS_ERR_VALUE(uccs->us_pram_offset)) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 183 printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 184 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 185 return -ENOMEM;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 186 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 187 id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 188 qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 189 uccs->us_pram_offset);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 190
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @191 uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 192
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 193 /* Set UCC to slow type */
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 194 ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 195 if (ret) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 196 printk(KERN_ERR "%s: cannot set UCC type", __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 197 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 198 return ret;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 199 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 200
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @201 qe_iowrite16be(us_info->max_rx_buf_length, &uccs->us_pram->mrblr);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 202
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 203 INIT_LIST_HEAD(&uccs->confQ);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 204
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 205 /* Allocate BDs. */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 206 uccs->rx_base_offset =
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 207 qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 208 QE_ALIGNMENT_OF_BD);
4c35630ccda56e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-05-08 209 if (IS_ERR_VALUE(uccs->rx_base_offset)) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 210 printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 211 us_info->rx_bd_ring_len);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 212 uccs->rx_base_offset = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 213 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 214 return -ENOMEM;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 215 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 216
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 217 uccs->tx_base_offset =
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 218 qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 219 QE_ALIGNMENT_OF_BD);
4c35630ccda56e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-05-08 220 if (IS_ERR_VALUE(uccs->tx_base_offset)) {
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 221 printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 222 uccs->tx_base_offset = 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 223 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 224 return -ENOMEM;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 225 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 226
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 227 /* Init Tx bds */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @228 bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 229 for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 230 /* clear bd buffer */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @231 qe_iowrite32be(0, &bd->buf);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 232 /* set bd status and length */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @233 qe_iowrite32be(0, (u32 *)bd);
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 234 bd++;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 235 }
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 236 /* for last BD set Wrap bit */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @237 qe_iowrite32be(0, &bd->buf);
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @238 qe_iowrite32be(cpu_to_be32(T_W), (u32 *)bd);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 239
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 240 /* Init Rx bds */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 @241 bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 242 for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 243 /* set bd status and length */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 244 qe_iowrite32be(0, (u32 *)bd);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 245 /* clear bd buffer */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 246 qe_iowrite32be(0, &bd->buf);
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 247 bd++;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 248 }
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 249 /* for last BD set Wrap bit */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 @250 qe_iowrite32be(cpu_to_be32(R_W), (u32 *)bd);
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 251 qe_iowrite32be(0, &bd->buf);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 252
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 253 /* Set GUMR (For more details see the hardware spec.). */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 254 /* gumr_h */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 255 gumr = us_info->tcrc;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 256 if (us_info->cdp)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 257 gumr |= UCC_SLOW_GUMR_H_CDP;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 258 if (us_info->ctsp)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 259 gumr |= UCC_SLOW_GUMR_H_CTSP;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 260 if (us_info->cds)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 261 gumr |= UCC_SLOW_GUMR_H_CDS;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 262 if (us_info->ctss)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 263 gumr |= UCC_SLOW_GUMR_H_CTSS;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 264 if (us_info->tfl)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 265 gumr |= UCC_SLOW_GUMR_H_TFL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 266 if (us_info->rfw)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 267 gumr |= UCC_SLOW_GUMR_H_RFW;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 268 if (us_info->txsy)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 269 gumr |= UCC_SLOW_GUMR_H_TXSY;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 270 if (us_info->rtsm)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 271 gumr |= UCC_SLOW_GUMR_H_RTSM;
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 272 qe_iowrite32be(gumr, &us_regs->gumr_h);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 273
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 274 /* gumr_l */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 @275 gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 276 us_info->diag | us_info->mode;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 277 if (us_info->tci)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 278 gumr |= UCC_SLOW_GUMR_L_TCI;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 279 if (us_info->rinv)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 280 gumr |= UCC_SLOW_GUMR_L_RINV;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 281 if (us_info->tinv)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 282 gumr |= UCC_SLOW_GUMR_L_TINV;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 283 if (us_info->tend)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 284 gumr |= UCC_SLOW_GUMR_L_TEND;
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 285 qe_iowrite32be(gumr, &us_regs->gumr_l);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 286
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 287 /* Function code registers */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 288
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 289 /* if the data is in cachable memory, the 'global' */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 290 /* in the function code should be set. */
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 291 uccs->us_pram->tbmr = UCC_BMR_BO_BE;
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 292 uccs->us_pram->rbmr = UCC_BMR_BO_BE;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 293
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 294 /* rbase, tbase are offsets from MURAM base */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 295 qe_iowrite16be(uccs->rx_base_offset, &uccs->us_pram->rbase);
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 296 qe_iowrite16be(uccs->tx_base_offset, &uccs->us_pram->tbase);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 297
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 298 /* Mux clocking */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 299 /* Grant Support */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 300 ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 301 /* Breakpoint Support */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 302 ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 303 /* Set Tsa or NMSI mode. */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 304 ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 305 /* If NMSI (not Tsa), set Tx and Rx clock. */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 306 if (!us_info->tsa) {
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 307 /* Rx clock routing */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 308 if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 309 COMM_DIR_RX)) {
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 310 printk(KERN_ERR "%s: illegal value for RX clock\n",
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 311 __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 312 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 313 return -EINVAL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 314 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 315 /* Tx clock routing */
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 316 if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 317 COMM_DIR_TX)) {
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 318 printk(KERN_ERR "%s: illegal value for TX clock\n",
e48b1b452ff630 arch/powerpc/sysdev/qe_lib/ucc_slow.c Harvey Harrison 2008-03-29 319 __func__);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 320 ucc_slow_free(uccs);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 321 return -EINVAL;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 322 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 323 }
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 324
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 325 /* Set interrupt mask register at UCC level. */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 326 qe_iowrite16be(us_info->uccm_mask, &us_regs->uccm);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 327
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 328 /* First, clear anything pending at UCC level,
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 329 * otherwise, old garbage may come through
5af68af5bcd34e arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-02-16 330 * as soon as the dam is opened. */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 331
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 332 /* Writing '1' clears */
eb63c63b289d28 drivers/soc/fsl/qe/ucc_slow.c Rasmus Villemoes 2019-11-01 333 qe_iowrite16be(0xffff, &us_regs->ucce);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 334
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 335 /* Issue QE Init command */
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 336 if (us_info->init_tx && us_info->init_rx)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 337 command = QE_INIT_TX_RX;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 338 else if (us_info->init_tx)
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 339 command = QE_INIT_TX;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 340 else
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 341 command = QE_INIT_RX; /* We know at least one is TRUE */
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 342
6b0b594bb81f86 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2007-10-03 343 qe_issue_cmd(command, id, us_info->protocol, 0);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 344
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 345 *uccs_ret = uccs;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 346 return 0;
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 347 }
845cf505cebd15 arch/powerpc/sysdev/qe_lib/ucc_slow.c Timur Tabi 2008-01-09 348 EXPORT_SYMBOL(ucc_slow_init);
9865853851313e arch/powerpc/sysdev/qe_lib/ucc_slow.c Li Yang 2006-10-03 349
:::::: The code at line 78 was first introduced by commit
:::::: 9865853851313e0d94a4acde42d6f9d8070bb376 [POWERPC] Add QUICC Engine (QE) infrastructure
:::::: TO: Li Yang <leoli@freescale.com>
:::::: CC: Paul Mackerras <paulus@samba.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org Intel Corporation
next prev parent reply other threads:[~2019-11-15 13:32 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 12:52 [PATCH 0/7] towards QE support on ARM Rasmus Villemoes
2019-10-18 12:52 ` [PATCH 1/7] soc: fsl: qe: remove space-before-tab Rasmus Villemoes
2019-10-18 12:57 ` Christophe Leroy
2019-10-18 12:52 ` [PATCH 2/7] soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs Rasmus Villemoes
2019-10-18 13:01 ` Christophe Leroy
2019-10-18 12:52 ` [PATCH 3/7] soc: fsl: qe: avoid ppc-specific io accessors Rasmus Villemoes
2019-10-22 15:01 ` Christophe Leroy
2019-10-23 7:08 ` Rasmus Villemoes
2019-10-18 12:52 ` [PATCH 4/7] soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic Rasmus Villemoes
2019-10-18 16:08 ` Christoph Hellwig
2019-10-24 8:32 ` Rasmus Villemoes
2019-10-30 0:36 ` Michael Ellerman
2019-10-18 12:52 ` [PATCH 5/7] serial: make SERIAL_QE depend on PPC32 Rasmus Villemoes
2019-10-18 12:52 ` [PATCH 6/7] serial: ucc_uart.c: explicitly include asm/cpm.h Rasmus Villemoes
2019-10-18 12:52 ` [PATCH 7/7] soc/fsl/qe/qe.h: remove include of asm/cpm.h Rasmus Villemoes
2019-10-18 20:16 ` [PATCH 0/7] towards QE support on ARM Leo Li
2019-10-18 20:52 ` Rasmus Villemoes
2019-10-18 21:52 ` Li Yang
2019-10-21 8:44 ` Rasmus Villemoes
2019-10-21 22:11 ` Li Yang
2019-10-22 2:24 ` Qiang Zhao
2019-10-22 10:17 ` Rasmus Villemoes
2019-10-23 2:52 ` Qiang Zhao
2019-10-24 20:02 ` Li Yang
2019-10-22 10:12 ` Rasmus Villemoes
2019-10-22 15:06 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 00/23] QUICC Engine " Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 01/23] soc: fsl: qe: remove space-before-tab Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 02/23] soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 03/23] soc: fsl: qe: avoid ppc-specific io accessors Rasmus Villemoes
2019-10-29 7:43 ` Christophe Leroy
2019-10-29 8:43 ` ppc: inlining iowrite32be and friends (was: Re: [PATCH v2 03/23] soc: fsl: qe: avoid ppc-specific io accessors) Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 04/23] soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 05/23] soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32 Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 06/23] soc: fsl: qe: avoid tail comments in qe_ic.h Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 07/23] soc: fsl: qe: merge qe_ic.h into qe_ic.c Rasmus Villemoes
2019-10-30 10:24 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 08/23] soc: fsl: qe: drop unneeded #includes Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 09/23] soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c Rasmus Villemoes
2019-10-30 10:45 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 10/23] soc: fsl: qe: use qe_ic_cascade_{low,high}_mpic also on 83xx Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 11/23] soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low Rasmus Villemoes
2019-10-30 10:47 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 12/23] soc: fsl: qe: drop assign-only high_active in qe_ic_init Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 13/23] soc: fsl: qe: remove pointless sysfs registration in qe_ic.c Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 14/23] soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/ Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 15/23] powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 16/23] powerpc/85xx: remove mostly pointless mpc85xx_qe_init() Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 17/23] soc: fsl: qe: make qe_ic_cascade_* static Rasmus Villemoes
2019-10-30 10:50 ` Christophe Leroy
2019-10-30 12:52 ` Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 18/23] soc: fsl: qe: remove unused qe_ic_set_* functions Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 19/23] net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32 Rasmus Villemoes
2019-10-30 10:55 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 20/23] serial: make SERIAL_QE " Rasmus Villemoes
2019-10-29 22:44 ` Leo Li
2019-10-29 22:50 ` Rasmus Villemoes
2019-10-30 10:56 ` Christophe Leroy
2019-10-25 12:40 ` [PATCH v2 21/23] serial: ucc_uart.c: explicitly include asm/cpm.h Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 22/23] soc/fsl/qe/qe.h: remove include of asm/cpm.h Rasmus Villemoes
2019-10-25 12:40 ` [PATCH v2 23/23] soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE Rasmus Villemoes
2019-10-28 14:17 ` kbuild test robot
2019-10-28 14:49 ` kbuild test robot
2019-10-29 0:50 ` kbuild test robot
2019-11-01 12:41 ` [PATCH v3 00/36] QUICC Engine support on ARM Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 01/36] soc: fsl: qe: remove space-before-tab Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 02/36] soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 03/36] soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 04/36] soc: fsl: qe: introduce qe_io{read,write}* wrappers Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 05/36] soc: fsl: qe: avoid ppc-specific io accessors Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 06/36] soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 07/36] soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32 Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 08/36] soc: fsl: qe: drop unneeded #includes Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 09/36] soc: fsl: qe: drop assign-only high_active in qe_ic_init Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 10/36] soc: fsl: qe: remove pointless sysfs registration in qe_ic.c Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 11/36] soc: fsl: qe: use qe_ic_cascade_{low,high}_mpic also on 83xx Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 12/36] soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/ Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 13/36] powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 14/36] powerpc/85xx: remove mostly pointless mpc85xx_qe_init() Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 15/36] soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 16/36] soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 17/36] soc: fsl: qe: remove unused qe_ic_set_* functions Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 18/36] soc: fsl: qe: don't use NO_IRQ in qe_ic.c Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 19/36] soc: fsl: qe: make qe_ic_get_{low,high}_irq static Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 20/36] soc: fsl: qe: simplify qe_ic_init() Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 21/36] soc: fsl: qe: merge qe_ic.h headers into qe_ic.c Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 22/36] soc: fsl: qe: qe.c: use of_property_read_* helpers Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 23/36] soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle() Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 24/36] soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpu Rasmus Villemoes
2019-11-01 12:41 ` [PATCH v3 25/36] soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init() Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 26/36] soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl Rasmus Villemoes
2019-11-01 16:18 ` Christophe Leroy
2019-11-01 16:59 ` Scott Wood
2019-11-01 12:42 ` [PATCH v3 27/36] soc/fsl/qe/qe.h: update include path for cpm.h Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 28/36] serial: ucc_uart: explicitly include soc/fsl/cpm.h Rasmus Villemoes
2019-11-01 16:19 ` Christophe Leroy
2019-11-04 7:38 ` Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 29/36] serial: ucc_uart: replace ppc-specific IO accessors Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 30/36] serial: ucc_uart: factor out soft_uart initialization Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 31/36] serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32 Rasmus Villemoes
2019-11-01 16:27 ` Christophe Leroy
2019-11-04 8:03 ` Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 32/36] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe() Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 33/36] serial: ucc_uart: access __be32 field using be32_to_cpu Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 34/36] net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32 Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 35/36] net/wan: make FSL_UCC_HDLC " Rasmus Villemoes
2019-11-01 16:29 ` Christophe Leroy
2019-11-01 22:31 ` Leo Li
2019-11-04 8:38 ` Rasmus Villemoes
2019-11-04 20:56 ` Li Yang
2019-11-05 22:46 ` Rasmus Villemoes
2019-11-05 23:46 ` Li Yang
2019-11-05 6:16 ` Qiang Zhao
2019-11-06 7:56 ` Rasmus Villemoes
2019-11-01 12:42 ` [PATCH v3 36/36] soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE Rasmus Villemoes
2019-11-02 17:39 ` kbuild test robot
2019-11-14 23:26 ` kbuild test robot
2019-11-14 23:26 ` [RFC PATCH] soc: fsl: qe: qe_uart_set_mctrl() can be static kbuild test robot
2019-11-15 13:31 ` kbuild test robot [this message]
2019-11-15 13:42 ` [PATCH v3 36/36] soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE Rasmus Villemoes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201911152105.ojcD68ZC%lkp@intel.com \
--to=lkp@intel.com \
--cc=christophe.leroy@c-s.fr \
--cc=kbuild-all@lists.01.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=oss@buserror.net \
--cc=qiang.zhao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).