* [PATCH] lib: Fix Kconfig indentation
@ 2019-11-20 13:38 Krzysztof Kozlowski
0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2019-11-20 13:38 UTC (permalink / raw)
To: linux-kernel; +Cc: Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
lib/Kconfig | 2 +-
lib/Kconfig.debug | 36 ++++++++++++++++++------------------
lib/Kconfig.kgdb | 8 ++++----
3 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/lib/Kconfig b/lib/Kconfig
index 6d7c5877c9f1..6e790dc55c5b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -572,7 +572,7 @@ config OID_REGISTRY
Enable fast lookup object identifier registry.
config UCS2_STRING
- tristate
+ tristate
#
# generic vdso
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4217bd26e220..bfc65c6d5fdc 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -128,8 +128,8 @@ config DYNAMIC_DEBUG
lineno : line number of the debug statement
module : module that contains the debug statement
function : function that contains the debug statement
- flags : '=p' means the line is turned 'on' for printing
- format : the format used for the debug statement
+ flags : '=p' means the line is turned 'on' for printing
+ format : the format used for the debug statement
From a live system:
@@ -190,7 +190,7 @@ config DEBUG_INFO
bool "Compile the kernel with debug info"
depends on DEBUG_KERNEL && !COMPILE_TEST
help
- If you say Y here the resulting kernel image will include
+ If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
This adds debug symbols to the kernel and modules (gcc -g), and
is needed if you intend to use kernel crashdump or binary object
@@ -287,13 +287,13 @@ config STRIP_ASM_SYMS
get_wchan() and suchlike.
config READABLE_ASM
- bool "Generate readable assembler code"
- depends on DEBUG_KERNEL
- help
- Disable some compiler optimizations that tend to generate human unreadable
- assembler output. This may make the kernel slightly slower, but it helps
- to keep kernel developers who have to stare a lot at assembler listings
- sane.
+ bool "Generate readable assembler code"
+ depends on DEBUG_KERNEL
+ help
+ Disable some compiler optimizations that tend to generate human unreadable
+ assembler output. This may make the kernel slightly slower, but it helps
+ to keep kernel developers who have to stare a lot at assembler listings
+ sane.
config HEADERS_INSTALL
bool "Install uapi headers to usr/include"
@@ -525,11 +525,11 @@ config DEBUG_OBJECTS_PERCPU_COUNTER
config DEBUG_OBJECTS_ENABLE_DEFAULT
int "debug_objects bootup default value (0-1)"
- range 0 1
- default "1"
- depends on DEBUG_OBJECTS
- help
- Debug objects boot parameter default value
+ range 0 1
+ default "1"
+ depends on DEBUG_OBJECTS
+ help
+ Debug objects boot parameter default value
config DEBUG_SLAB
bool "Debug slab memory allocations"
@@ -660,7 +660,7 @@ config DEBUG_VM
depends on DEBUG_KERNEL
help
Enable this to turn on extended checks in the virtual-memory system
- that may impact performance.
+ that may impact performance.
If unsure, say N.
@@ -1400,7 +1400,7 @@ config DEBUG_WQ_FORCE_RR_CPU
be impacted.
config DEBUG_BLOCK_EXT_DEVT
- bool "Force extended block device numbers and spread them"
+ bool "Force extended block device numbers and spread them"
depends on DEBUG_KERNEL
depends on BLOCK
default n
@@ -1532,7 +1532,7 @@ config DEBUG_AID_FOR_SYZBOT
bool "Additional debug code for syzbot"
default n
help
- This option is intended for testing by syzbot.
+ This option is intended for testing by syzbot.
menu "$(SRCARCH) Debugging"
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index bbe397df04a3..933680b59e2d 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -64,9 +64,9 @@ config KGDB_LOW_LEVEL_TRAP
depends on X86 || MIPS
default n
help
- This will add an extra call back to kgdb for the breakpoint
- exception handler which will allow kgdb to step through a
- notify handler.
+ This will add an extra call back to kgdb for the breakpoint
+ exception handler which will allow kgdb to step through a
+ notify handler.
config KGDB_KDB
bool "KGDB_KDB: include kdb frontend for kgdb"
@@ -96,7 +96,7 @@ config KDB_DEFAULT_ENABLE
The config option merely sets the default at boot time. Both
issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
- setting with kdb.cmd_enable=X kernel command line option will
+ setting with kdb.cmd_enable=X kernel command line option will
override the default settings.
config KDB_KEYBOARD
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] lib: Fix Kconfig indentation
@ 2019-11-21 3:24 Krzysztof Kozlowski
0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2019-11-21 3:24 UTC (permalink / raw)
To: Jiri Kosina, linux-kernel, kernel-janitors; +Cc: Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
---
lib/Kconfig | 18 +++---
lib/Kconfig.debug | 162 +++++++++++++++++++++++++++---------------------------
lib/Kconfig.kgdb | 16 +++---
3 files changed, 98 insertions(+), 98 deletions(-)
diff --git a/lib/Kconfig b/lib/Kconfig
index 6d7c5877c9f1..4b022bb2cb5d 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -522,7 +522,7 @@ config NLATTR
# Generic 64-bit atomic support is selected if needed
#
config GENERIC_ATOMIC64
- bool
+ bool
config LRU_CACHE
tristate
@@ -572,7 +572,7 @@ config OID_REGISTRY
Enable fast lookup object identifier registry.
config UCS2_STRING
- tristate
+ tristate
#
# generic vdso
@@ -584,16 +584,16 @@ source "lib/fonts/Kconfig"
config SG_SPLIT
def_bool n
help
- Provides a helper to split scatterlists into chunks, each chunk being
- a scatterlist. This should be selected by a driver or an API which
- whishes to split a scatterlist amongst multiple DMA channels.
+ Provides a helper to split scatterlists into chunks, each chunk being
+ a scatterlist. This should be selected by a driver or an API which
+ whishes to split a scatterlist amongst multiple DMA channels.
config SG_POOL
def_bool n
help
- Provides a helper to allocate chained scatterlists. This should be
- selected by a driver or an API which whishes to allocate chained
- scatterlist.
+ Provides a helper to allocate chained scatterlists. This should be
+ selected by a driver or an API which whishes to allocate chained
+ scatterlist.
#
# sg chaining option
@@ -620,7 +620,7 @@ config ARCH_HAS_UACCESS_MCSAFE
# Temporary. Goes away when all archs are cleaned up
config ARCH_STACKWALK
- bool
+ bool
config STACKDEPOT
bool
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4217bd26e220..d39046beed51 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -128,8 +128,8 @@ config DYNAMIC_DEBUG
lineno : line number of the debug statement
module : module that contains the debug statement
function : function that contains the debug statement
- flags : '=p' means the line is turned 'on' for printing
- format : the format used for the debug statement
+ flags : '=p' means the line is turned 'on' for printing
+ format : the format used for the debug statement
From a live system:
@@ -190,7 +190,7 @@ config DEBUG_INFO
bool "Compile the kernel with debug info"
depends on DEBUG_KERNEL && !COMPILE_TEST
help
- If you say Y here the resulting kernel image will include
+ If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
This adds debug symbols to the kernel and modules (gcc -g), and
is needed if you intend to use kernel crashdump or binary object
@@ -287,13 +287,13 @@ config STRIP_ASM_SYMS
get_wchan() and suchlike.
config READABLE_ASM
- bool "Generate readable assembler code"
- depends on DEBUG_KERNEL
- help
- Disable some compiler optimizations that tend to generate human unreadable
- assembler output. This may make the kernel slightly slower, but it helps
- to keep kernel developers who have to stare a lot at assembler listings
- sane.
+ bool "Generate readable assembler code"
+ depends on DEBUG_KERNEL
+ help
+ Disable some compiler optimizations that tend to generate human unreadable
+ assembler output. This may make the kernel slightly slower, but it helps
+ to keep kernel developers who have to stare a lot at assembler listings
+ sane.
config HEADERS_INSTALL
bool "Install uapi headers to usr/include"
@@ -525,11 +525,11 @@ config DEBUG_OBJECTS_PERCPU_COUNTER
config DEBUG_OBJECTS_ENABLE_DEFAULT
int "debug_objects bootup default value (0-1)"
- range 0 1
- default "1"
- depends on DEBUG_OBJECTS
- help
- Debug objects boot parameter default value
+ range 0 1
+ default "1"
+ depends on DEBUG_OBJECTS
+ help
+ Debug objects boot parameter default value
config DEBUG_SLAB
bool "Debug slab memory allocations"
@@ -660,7 +660,7 @@ config DEBUG_VM
depends on DEBUG_KERNEL
help
Enable this to turn on extended checks in the virtual-memory system
- that may impact performance.
+ that may impact performance.
If unsure, say N.
@@ -1055,38 +1055,38 @@ config PROVE_LOCKING
select TRACE_IRQFLAGS
default n
help
- This feature enables the kernel to prove that all locking
- that occurs in the kernel runtime is mathematically
- correct: that under no circumstance could an arbitrary (and
- not yet triggered) combination of observed locking
- sequences (on an arbitrary number of CPUs, running an
- arbitrary number of tasks and interrupt contexts) cause a
- deadlock.
-
- In short, this feature enables the kernel to report locking
- related deadlocks before they actually occur.
-
- The proof does not depend on how hard and complex a
- deadlock scenario would be to trigger: how many
- participant CPUs, tasks and irq-contexts would be needed
- for it to trigger. The proof also does not depend on
- timing: if a race and a resulting deadlock is possible
- theoretically (no matter how unlikely the race scenario
- is), it will be proven so and will immediately be
- reported by the kernel (once the event is observed that
- makes the deadlock theoretically possible).
-
- If a deadlock is impossible (i.e. the locking rules, as
- observed by the kernel, are mathematically correct), the
- kernel reports nothing.
-
- NOTE: this feature can also be enabled for rwlocks, mutexes
- and rwsems - in which case all dependencies between these
- different locking variants are observed and mapped too, and
- the proof of observed correctness is also maintained for an
- arbitrary combination of these separate locking variants.
-
- For more details, see Documentation/locking/lockdep-design.rst.
+ This feature enables the kernel to prove that all locking
+ that occurs in the kernel runtime is mathematically
+ correct: that under no circumstance could an arbitrary (and
+ not yet triggered) combination of observed locking
+ sequences (on an arbitrary number of CPUs, running an
+ arbitrary number of tasks and interrupt contexts) cause a
+ deadlock.
+
+ In short, this feature enables the kernel to report locking
+ related deadlocks before they actually occur.
+
+ The proof does not depend on how hard and complex a
+ deadlock scenario would be to trigger: how many
+ participant CPUs, tasks and irq-contexts would be needed
+ for it to trigger. The proof also does not depend on
+ timing: if a race and a resulting deadlock is possible
+ theoretically (no matter how unlikely the race scenario
+ is), it will be proven so and will immediately be
+ reported by the kernel (once the event is observed that
+ makes the deadlock theoretically possible).
+
+ If a deadlock is impossible (i.e. the locking rules, as
+ observed by the kernel, are mathematically correct), the
+ kernel reports nothing.
+
+ NOTE: this feature can also be enabled for rwlocks, mutexes
+ and rwsems - in which case all dependencies between these
+ different locking variants are observed and mapped too, and
+ the proof of observed correctness is also maintained for an
+ arbitrary combination of these separate locking variants.
+
+ For more details, see Documentation/locking/lockdep-design.rst.
config LOCK_STAT
bool "Lock usage statistics"
@@ -1098,24 +1098,24 @@ config LOCK_STAT
select DEBUG_LOCK_ALLOC
default n
help
- This feature enables tracking lock contention points
+ This feature enables tracking lock contention points
- For more details, see Documentation/locking/lockstat.rst
+ For more details, see Documentation/locking/lockstat.rst
- This also enables lock events required by "perf lock",
- subcommand of perf.
- If you want to use "perf lock", you also need to turn on
- CONFIG_EVENT_TRACING.
+ This also enables lock events required by "perf lock",
+ subcommand of perf.
+ If you want to use "perf lock", you also need to turn on
+ CONFIG_EVENT_TRACING.
- CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
- (CONFIG_LOCKDEP defines "acquire" and "release" events.)
+ CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
+ (CONFIG_LOCKDEP defines "acquire" and "release" events.)
config DEBUG_RT_MUTEXES
bool "RT Mutex debugging, deadlock detection"
depends on DEBUG_KERNEL && RT_MUTEXES
help
- This allows rt mutex semantics violations and rt mutex related
- deadlocks (lockups) to be detected and reported automatically.
+ This allows rt mutex semantics violations and rt mutex related
+ deadlocks (lockups) to be detected and reported automatically.
config DEBUG_SPINLOCK
bool "Spinlock and rw-lock debugging: basic checks"
@@ -1131,8 +1131,8 @@ config DEBUG_MUTEXES
bool "Mutex debugging: basic checks"
depends on DEBUG_KERNEL
help
- This feature allows mutex semantics violations to be detected and
- reported.
+ This feature allows mutex semantics violations to be detected and
+ reported.
config DEBUG_WW_MUTEX_SLOWPATH
bool "Wait/wound mutex debugging: Slowpath testing"
@@ -1141,15 +1141,15 @@ config DEBUG_WW_MUTEX_SLOWPATH
select DEBUG_SPINLOCK
select DEBUG_MUTEXES
help
- This feature enables slowpath testing for w/w mutex users by
- injecting additional -EDEADLK wound/backoff cases. Together with
- the full mutex checks enabled with (CONFIG_PROVE_LOCKING) this
- will test all possible w/w mutex interface abuse with the
- exception of simply not acquiring all the required locks.
- Note that this feature can introduce significant overhead, so
- it really should not be enabled in a production or distro kernel,
- even a debug kernel. If you are a driver writer, enable it. If
- you are a distro, do not.
+ This feature enables slowpath testing for w/w mutex users by
+ injecting additional -EDEADLK wound/backoff cases. Together with
+ the full mutex checks enabled with (CONFIG_PROVE_LOCKING) this
+ will test all possible w/w mutex interface abuse with the
+ exception of simply not acquiring all the required locks.
+ Note that this feature can introduce significant overhead, so
+ it really should not be enabled in a production or distro kernel,
+ even a debug kernel. If you are a driver writer, enable it. If
+ you are a distro, do not.
config DEBUG_RWSEMS
bool "RW Semaphore debugging: basic checks"
@@ -1166,12 +1166,12 @@ config DEBUG_LOCK_ALLOC
select DEBUG_RT_MUTEXES if RT_MUTEXES
select LOCKDEP
help
- This feature will check whether any held lock (spinlock, rwlock,
- mutex or rwsem) is incorrectly freed by the kernel, via any of the
- memory-freeing routines (kfree(), kmem_cache_free(), free_pages(),
- vfree(), etc.), whether a live lock is incorrectly reinitialized via
- spin_lock_init()/mutex_init()/etc., or whether there is any lock
- held during task exit.
+ This feature will check whether any held lock (spinlock, rwlock,
+ mutex or rwsem) is incorrectly freed by the kernel, via any of the
+ memory-freeing routines (kfree(), kmem_cache_free(), free_pages(),
+ vfree(), etc.), whether a live lock is incorrectly reinitialized via
+ spin_lock_init()/mutex_init()/etc., or whether there is any lock
+ held during task exit.
config LOCKDEP
bool
@@ -1400,7 +1400,7 @@ config DEBUG_WQ_FORCE_RR_CPU
be impacted.
config DEBUG_BLOCK_EXT_DEVT
- bool "Force extended block device numbers and spread them"
+ bool "Force extended block device numbers and spread them"
depends on DEBUG_KERNEL
depends on BLOCK
default n
@@ -1529,10 +1529,10 @@ config IO_STRICT_DEVMEM
If in doubt, say Y.
config DEBUG_AID_FOR_SYZBOT
- bool "Additional debug code for syzbot"
- default n
- help
- This option is intended for testing by syzbot.
+ bool "Additional debug code for syzbot"
+ default n
+ help
+ This option is intended for testing by syzbot.
menu "$(SRCARCH) Debugging"
@@ -1800,7 +1800,7 @@ config TEST_LKM
config TEST_VMALLOC
tristate "Test module for stress/performance analysis of vmalloc allocator"
default n
- depends on MMU
+ depends on MMU
depends on m
help
This builds the "test_vmalloc" module that should be used for
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index bbe397df04a3..b91dfded57f1 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -60,13 +60,13 @@ config KGDB_TESTS_BOOT_STRING
default of V1F100.
config KGDB_LOW_LEVEL_TRAP
- bool "KGDB: Allow debugging with traps in notifiers"
- depends on X86 || MIPS
- default n
- help
- This will add an extra call back to kgdb for the breakpoint
- exception handler which will allow kgdb to step through a
- notify handler.
+ bool "KGDB: Allow debugging with traps in notifiers"
+ depends on X86 || MIPS
+ default n
+ help
+ This will add an extra call back to kgdb for the breakpoint
+ exception handler which will allow kgdb to step through a
+ notify handler.
config KGDB_KDB
bool "KGDB_KDB: include kdb frontend for kgdb"
@@ -96,7 +96,7 @@ config KDB_DEFAULT_ENABLE
The config option merely sets the default at boot time. Both
issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
- setting with kdb.cmd_enable=X kernel command line option will
+ setting with kdb.cmd_enable=X kernel command line option will
override the default settings.
config KDB_KEYBOARD
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-21 3:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-20 13:38 [PATCH] lib: Fix Kconfig indentation Krzysztof Kozlowski
2019-11-21 3:24 Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).