[PATCH AUTOSEL 4.14 001/127] scsi: lpfc: Fix kernel Oops due to null pring pointers

[PATCH AUTOSEL 4.14 001/127] scsi: lpfc: Fix kernel Oops due to null pring pointers

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 5a9eeff57f340238c39c95d8e7e54c96fc722de7 ]

Driver is hitting null pring pointers in lpfc_do_work().

Pointer assignment occurs based on SLI-revision. If recovering after an
error, its possible the sli revision for the port was cleared, making the
lpfc_phba_elsring() not return a ring pointer, thus the null pointer.

Add SLI revision checking to lpfc_phba_elsring() and status checking to all
callers.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h      | 6 ++++++
 drivers/scsi/lpfc/lpfc_els.c  | 2 ++
 drivers/scsi/lpfc/lpfc_init.c | 7 ++++++-
 drivers/scsi/lpfc/lpfc_sli.c  | 2 ++
 4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index bc61cc8bc6f02..03e95a3216c8c 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1239,6 +1239,12 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
 static inline struct lpfc_sli_ring *
 lpfc_phba_elsring(struct lpfc_hba *phba)
 {
+	/* Return NULL if sli_rev has become invalid due to bad fw */
+	if (phba->sli_rev != LPFC_SLI_REV4  &&
+	    phba->sli_rev != LPFC_SLI_REV3  &&
+	    phba->sli_rev != LPFC_SLI_REV2)
+		return NULL;
+
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		if (phba->sli4_hba.els_wq)
 			return phba->sli4_hba.els_wq->pring;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ddd29752d96dc..0032465d1b630 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1335,6 +1335,8 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba)
 			Fabric_DID);
 
 	pring = lpfc_phba_elsring(phba);
+	if (unlikely(!pring))
+		return -EIO;
 
 	/*
 	 * Check the txcmplq for an iocb that matches the nport the driver is
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 25612ccf6ff28..1da125afebddb 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1773,7 +1773,12 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
 	lpfc_offline(phba);
 	/* release interrupt for possible resource change */
 	lpfc_sli4_disable_intr(phba);
-	lpfc_sli_brdrestart(phba);
+	rc = lpfc_sli_brdrestart(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"6309 Failed to restart board\n");
+		return rc;
+	}
 	/* request and enable interrupt */
 	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 6c2b098b76095..0128ea32b208f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4421,6 +4421,8 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
 	hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
 
 	rc = lpfc_sli4_brdreset(phba);
+	if (rc)
+		return rc;
 
 	spin_lock_irq(&phba->hbalock);
 	phba->pport->stopped = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 002/127] scsi: lpfc: Fix dif and first burst use in write commands

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 07cb671bb8550..2eba0c39ac1c4 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2714,6 +2714,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2819,6 +2820,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	return 0;
 err:
 	if (lpfc_cmd->seg_cnt)
@@ -3371,6 +3380,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
@@ -3486,6 +3496,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	/*
 	 * If the OAS driver feature is enabled and the lun is enabled for
 	 * OAS, set the oas iocb related flags.
-- 
2.20.1

[PATCH AUTOSEL 4.14 003/127] ARM: dts: Fix up SQ201 flash access

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit d88b11ef91b15d0af9c0676cbf4f441a0dff0c56 ]

This sets the partition information on the SQ201 to be read
out from the RedBoot partition table, removes the static
partition table and sets our boot options to mount root from
/dev/mtdblock2 where the squashfs+JFFS2 resides.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini-sq201.dts | 37 ++++--------------------------
 1 file changed, 5 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 63c02ca9513c4..e9e2f6ff0c583 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -20,7 +20,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
 		stdout-path = &uart0;
 	};
 
@@ -71,37 +71,10 @@
 			/* 16MB of flash */
 			reg = <0x30000000 0x01000000>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00120000>;
-				read-only;
-			};
-			partition@120000 {
-				label = "Kernel";
-				reg = <0x00120000 0x00200000>;
-			};
-			partition@320000 {
-				label = "Ramdisk";
-				reg = <0x00320000 0x00600000>;
-			};
-			partition@920000 {
-				label = "Application";
-				reg = <0x00920000 0x00600000>;
-			};
-			partition@f20000 {
-				label = "VCTL";
-				reg = <0x00f20000 0x00020000>;
-				read-only;
-			};
-			partition@f40000 {
-				label = "CurConf";
-				reg = <0x00f40000 0x000a0000>;
-				read-only;
-			};
-			partition@fe0000 {
-				label = "FIS directory";
-				reg = <0x00fe0000 0x00020000>;
-				read-only;
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
 			};
 		};
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 005/127] ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 998a84c27a7f3f9133d32af64e19c05cec161a1a ]

imx53-voipac-dmm-668 has two memory nodes, but the correct representation
would be to use a single one with two reg entries - one for each RAM chip
select, so fix it accordingly.

Reported-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index df8dafe2564dd..2297ed90ee895 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -17,12 +17,8 @@
 
 	memory@70000000 {
 		device_type = "memory";
-		reg = <0x70000000 0x20000000>;
-	};
-
-	memory@b0000000 {
-		device_type = "memory";
-		reg = <0xb0000000 0x20000000>;
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
 	};
 
 	regulators {
-- 
2.20.1

[PATCH AUTOSEL 4.14 006/127] parisc: Fix serio address output

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 785145171d17af2554128becd6a7c8f89e101141 ]

We want the hpa addresses printed in the serio modules, not some
virtual ioremap()ed address, e.g.:

 serio: gsc-ps2-keyboard port at 0xf0108000 irq 22 @ 2:0:11
 serio: gsc-ps2-mouse port at 0xf0108100 irq 22 @ 2:0:12

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/gscps2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index aa9f29b875dea..d84e3b70215ad 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -382,9 +382,9 @@ static int __init gscps2_probe(struct parisc_device *dev)
 		goto fail;
 #endif
 
-	printk(KERN_INFO "serio: %s port at 0x%p irq %d @ %s\n",
+	pr_info("serio: %s port at 0x%08lx irq %d @ %s\n",
 		ps2port->port->name,
-		ps2port->addr,
+		hpa,
 		ps2port->padev->irq,
 		ps2port->port->phys);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 007/127] parisc: Fix HP SDC hpa address output

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit c4bff35ca1bfba886da6223c9fed76a2b1382b8e ]

Show the hpa address of the HP SDC instead of a hashed value, e.g.:
HP SDC: HP SDC at 0xf0201000, IRQ 23 (NMI IRQ 24)

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/hp_sdc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 8eef6849d0660..5585823ced19d 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -887,8 +887,8 @@ static int __init hp_sdc_init(void)
 			"HP SDC NMI", &hp_sdc))
 		goto err2;
 
-	printk(KERN_INFO PREFIX "HP SDC at 0x%p, IRQ %d (NMI IRQ %d)\n",
-	       (void *)hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
+	pr_info(PREFIX "HP SDC at 0x%08lx, IRQ %d (NMI IRQ %d)\n",
+	       hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
 
 	hp_sdc_status_in8();
 	hp_sdc_data_in8();
-- 
2.20.1

[PATCH AUTOSEL 4.14 008/127] arm64: mm: Prevent mismatched 52-bit VA support

[Sasha Levin]

From: Steve Capper <steve.capper@arm.com>

[ Upstream commit a96a33b1ca57dbea4285893dedf290aeb8eb090b ]

For cases where there is a mismatch in ARMv8.2-LVA support between CPUs
we have to be careful in allowing secondary CPUs to boot if 52-bit
virtual addresses have already been enabled on the boot CPU.

This patch adds code to the secondary startup path. If the boot CPU has
enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the
secondary can also enable 52-bit support. If not, the secondary is
prevented from booting and an error message is displayed indicating why.

Technically this patch could be implemented using the cpufeature code
when considering 52-bit userspace support. However, we employ low level
checks here as the cpufeature code won't be able to run if we have
mismatched 52-bit kernel va support.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/head.S | 26 ++++++++++++++++++++++++++
 arch/arm64/kernel/smp.c  |  5 +++++
 2 files changed, 31 insertions(+)

diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 92cc7b51f1002..9c00fd2acc2a4 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -594,6 +594,7 @@ secondary_startup:
 	/*
 	 * Common entry point for secondary CPUs.
 	 */
+	bl	__cpu_secondary_check52bitva
 	bl	__cpu_setup			// initialise processor
 	bl	__enable_mmu
 	ldr	x8, =__secondary_switched
@@ -668,6 +669,31 @@ ENTRY(__enable_mmu)
 	ret
 ENDPROC(__enable_mmu)
 
+ENTRY(__cpu_secondary_check52bitva)
+#ifdef CONFIG_ARM64_52BIT_VA
+	ldr_l	x0, vabits_user
+	cmp	x0, #52
+	b.ne	2f
+
+	mrs_s	x0, SYS_ID_AA64MMFR2_EL1
+	and	x0, x0, #(0xf << ID_AA64MMFR2_LVA_SHIFT)
+	cbnz	x0, 2f
+
+	adr_l	x0, va52mismatch
+	mov	w1, #1
+	strb	w1, [x0]
+	dmb	sy
+	dc	ivac, x0	// Invalidate potentially stale cache line
+
+	update_early_cpu_boot_status CPU_STUCK_IN_KERNEL, x0, x1
+1:	wfe
+	wfi
+	b	1b
+
+#endif
+2:	ret
+ENDPROC(__cpu_secondary_check52bitva)
+
 __no_granule_support:
 	/* Indicate that this CPU can't boot and is stuck in the kernel */
 	update_early_cpu_boot_status CPU_STUCK_IN_KERNEL, x1, x2
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index a683cd4995157..0881dfab10f8f 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -106,6 +106,7 @@ static int boot_secondary(unsigned int cpu, struct task_struct *idle)
 }
 
 static DECLARE_COMPLETION(cpu_running);
+bool va52mismatch __ro_after_init;
 
 int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
@@ -135,6 +136,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 
 		if (!cpu_online(cpu)) {
 			pr_crit("CPU%u: failed to come online\n", cpu);
+
+			if (IS_ENABLED(CONFIG_ARM64_52BIT_VA) && va52mismatch)
+				pr_crit("CPU%u: does not support 52-bit VAs\n", cpu);
+
 			ret = -EIO;
 		}
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.14 009/127] arm64: smp: Handle errors reported by the firmware

[Sasha Levin]

From: Suzuki K Poulose <Suzuki.Poulose@arm.com>

[ Upstream commit f357b3a7e17af7736d67d8267edc1ed3d1dd9391 ]

The __cpu_up() routine ignores the errors reported by the firmware
for a CPU bringup operation and looks for the error status set by the
booting CPU. If the CPU never entered the kernel, we could end up
in assuming stale error status, which otherwise would have been
set/cleared appropriately by the booting CPU.

Reported-by: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/smp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 0881dfab10f8f..909bf3926fd23 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -144,6 +144,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 		}
 	} else {
 		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
+		return ret;
 	}
 
 	secondary_data.task = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.14 010/127] ARM: OMAP1: fix USB configuration for device-only setups

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit c7b7b5cbd0c859b1546a5a3455d457708bdadf4c ]

Currently we do USB configuration only if the host mode (CONFIG_USB)
is enabled. But it should be done also in the case of device-only setups,
so change the condition to CONFIG_USB_SUPPORT. This allows to use
omap_udc on Palm Tungsten E.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap1/Makefile           | 2 +-
 arch/arm/mach-omap1/include/mach/usb.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index e8ccf51c6f292..ec0235899de20 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -25,7 +25,7 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
-usb-fs-$(CONFIG_USB)			:= usb.o
+usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 77867778d4ec7..5429d86c7190d 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -11,7 +11,7 @@
 
 #include <linux/platform_data/usb-omap1.h>
 
-#if IS_ENABLED(CONFIG_USB)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
-- 
2.20.1

[PATCH AUTOSEL 4.14 011/127] RDMA/vmw_pvrdma: Use atomic memory allocation in create AH

[Sasha Levin]

From: Gal Pressman <galpress@amazon.com>

[ Upstream commit a276a4d93bf1580d737f38d1810e5f4b166f3edd ]

Create address handle callback should not sleep, use GFP_ATOMIC instead of
GFP_KERNEL for memory allocation.

Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Cc: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
index aa533f08e0171..5c7aa6ff15382 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
+++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
@@ -550,7 +550,7 @@ struct ib_ah *pvrdma_create_ah(struct ib_pd *pd, struct rdma_ah_attr *ah_attr,
 	if (!atomic_add_unless(&dev->num_ahs, 1, dev->dsr->caps.max_ah))
 		return ERR_PTR(-ENOMEM);
 
-	ah = kzalloc(sizeof(*ah), GFP_KERNEL);
+	ah = kzalloc(sizeof(*ah), GFP_ATOMIC);
 	if (!ah) {
 		atomic_dec(&dev->num_ahs);
 		return ERR_PTR(-ENOMEM);
-- 
2.20.1

[PATCH AUTOSEL 4.14 012/127] PM / AVS: SmartReflex: NULL check before some freeing functions is not needed

[Sasha Levin]

From: Thomas Meyer <thomas@m3y3r.de>

[ Upstream commit 14d338a857f05f894ba3badd9e6d3039c68b8180 ]

NULL check before some freeing functions is not needed.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/avs/smartreflex.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 974fd684bab2c..4b6fddc183948 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -994,8 +994,7 @@ static int omap_sr_remove(struct platform_device *pdev)
 
 	if (sr_info->autocomp_active)
 		sr_stop_vddautocomp(sr_info);
-	if (sr_info->dbg_dir)
-		debugfs_remove_recursive(sr_info->dbg_dir);
+	debugfs_remove_recursive(sr_info->dbg_dir);
 
 	pm_runtime_disable(&pdev->dev);
 	list_del(&sr_info->node);
-- 
2.20.1

[PATCH AUTOSEL 4.14 013/127] ARM: ks8695: fix section mismatch warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 4aa64677330beeeed721b4b122884dabad845d66 ]

WARNING: vmlinux.o(.text+0x13250): Section mismatch in reference from the function acs5k_i2c_init() to the (unknown reference) .init.data:(unknown)
The function acs5k_i2c_init() references
the (unknown reference) __initdata (unknown).
This is often because acs5k_i2c_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-ks8695/board-acs5k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index e4d709c8ed32f..76d3083f1f634 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
 	},
 };
 
-static void acs5k_i2c_init(void)
+static void __init acs5k_i2c_init(void)
 {
 	/* The gpio interface */
 	platform_device_register(&acs5k_i2c_device);
-- 
2.20.1

[PATCH AUTOSEL 4.14 014/127] ACPI / LPSS: Ignore acpi_device_fix_up_power() return value

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1a2fa02f7489dc4d746f2a15fb77b3ce1affade8 ]

Ignore acpi_device_fix_up_power() return value. If we return an error
we end up with acpi_default_enumeration() still creating a platform-
device for the device and we end up with the device still being used
but without the special LPSS related handling which is not useful.

Specicifically ignoring the error fixes the touchscreen no longer
working after a suspend/resume on a Prowise PT301 tablet.

This tablet has a broken _PS0 method on the touchscreen's I2C controller,
causing acpi_device_fix_up_power() to fail, causing fallback to standard
platform-dev handling and specifically causing acpi_lpss_save/restore_ctx
to not run.

The I2C controllers _PS0 method does actually turn on the device, but then
does some more nonsense which fails when run during early boot trying to
use I2C opregion handling on another not-yet registered I2C controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpi_lpss.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 51592dd45b066..84124b8a7778a 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -500,12 +500,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
 	 * have _PS0 and _PS3 without _PSC (and no power resources), so
 	 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 	 */
-	ret = acpi_device_fix_up_power(adev);
-	if (ret) {
-		/* Skip the device, but continue the namespace scan. */
-		ret = 0;
-		goto err_out;
-	}
+	acpi_device_fix_up_power(adev);
 
 	adev->driver_data = pdata;
 	pdev = acpi_create_platform_device(adev, dev_desc->properties);
-- 
2.20.1

[PATCH AUTOSEL 4.14 015/127] scsi: lpfc: Enable Management features for IF_TYPE=6

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 719162bd5bb968203397b9b1d0dd30a9797bbd09 ]

Addition of support for if_type=6 missed several checks for interface type,
resulting in the failure of several key management features such as
firmware dump and loopback testing.

Correct the checks on the if_type so that both SLI4 IF_TYPE's 2 and 6 are
supported.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_attr.c    | 4 ++--
 drivers/scsi/lpfc/lpfc_bsg.c     | 6 +++---
 drivers/scsi/lpfc/lpfc_els.c     | 2 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 3da242201cb45..82ce5d1930189 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1178,7 +1178,7 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 		return -EACCES;
 
 	if ((phba->sli_rev < LPFC_SLI_REV4) ||
-	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	     LPFC_SLI_INTF_IF_TYPE_2))
 		return -EPERM;
 
@@ -4056,7 +4056,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 	uint32_t prev_val, if_type;
 
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
-	if (if_type == LPFC_SLI_INTF_IF_TYPE_2 &&
+	if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 &&
 	    phba->hba_flag & HBA_FORCED_LINK_SPEED)
 		return -EPERM;
 
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index d89816222b230..6dde21dc82a3c 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2221,7 +2221,7 @@ lpfc_bsg_diag_loopback_mode(struct bsg_job *job)
 
 	if (phba->sli_rev < LPFC_SLI_REV4)
 		rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job);
-	else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
 		 LPFC_SLI_INTF_IF_TYPE_2)
 		rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job);
 	else
@@ -2261,7 +2261,7 @@ lpfc_sli4_bsg_diag_mode_end(struct bsg_job *job)
 
 	if (phba->sli_rev < LPFC_SLI_REV4)
 		return -ENODEV;
-	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	    LPFC_SLI_INTF_IF_TYPE_2)
 		return -ENODEV;
 
@@ -2353,7 +2353,7 @@ lpfc_sli4_bsg_link_diag_test(struct bsg_job *job)
 		rc = -ENODEV;
 		goto job_error;
 	}
-	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	    LPFC_SLI_INTF_IF_TYPE_2) {
 		rc = -ENODEV;
 		goto job_error;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 0032465d1b630..63c1a81005e52 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5528,7 +5528,7 @@ lpfc_els_rcv_rdp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	struct ls_rjt stat;
 
 	if (phba->sli_rev < LPFC_SLI_REV4 ||
-	    bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	    bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 						LPFC_SLI_INTF_IF_TYPE_2) {
 		rjt_err = LSRJT_UNABLE_TPC;
 		rjt_expl = LSEXP_REQ_UNSUPPORTED;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index b970933a218d5..424e870676046 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4749,7 +4749,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 				if (phba->sli_rev == LPFC_SLI_REV4 &&
 				    (!(vport->load_flag & FC_UNLOADING)) &&
 				    (bf_get(lpfc_sli_intf_if_type,
-				     &phba->sli4_hba.sli_intf) ==
+				     &phba->sli4_hba.sli_intf) >=
 				      LPFC_SLI_INTF_IF_TYPE_2) &&
 				    (kref_read(&ndlp->kref) > 0)) {
 					mbox->context1 = lpfc_nlp_get(ndlp);
-- 
2.20.1

[PATCH AUTOSEL 4.14 016/127] crypto: user - support incremental algorithm dumps

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit 0ac6b8fb23c724b015d9ca70a89126e8d1563166 ]

CRYPTO_MSG_GETALG in NLM_F_DUMP mode sometimes doesn't return all
registered crypto algorithms, because it doesn't support incremental
dumps.  crypto_dump_report() only permits itself to be called once, yet
the netlink subsystem allocates at most ~64 KiB for the skb being dumped
to.  Thus only the first recvmsg() returns data, and it may only include
a subset of the crypto algorithms even if the user buffer passed to
recvmsg() is large enough to hold all of them.

Fix this by using one of the arguments in the netlink_callback structure
to keep track of the current position in the algorithm list.  Then
userspace can do multiple recvmsg() on the socket after sending the dump
request.  This is the way netlink dumps work elsewhere in the kernel;
it's unclear why this was different (probably just an oversight).

Also fix an integer overflow when calculating the dump buffer size hint.

Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/crypto_user.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c
index 2b8fb8f1391e0..5e457a7dd1c92 100644
--- a/crypto/crypto_user.c
+++ b/crypto/crypto_user.c
@@ -296,30 +296,33 @@ static int crypto_report(struct sk_buff *in_skb, struct nlmsghdr *in_nlh,
 
 static int crypto_dump_report(struct sk_buff *skb, struct netlink_callback *cb)
 {
-	struct crypto_alg *alg;
+	const size_t start_pos = cb->args[0];
+	size_t pos = 0;
 	struct crypto_dump_info info;
-	int err;
-
-	if (cb->args[0])
-		goto out;
-
-	cb->args[0] = 1;
+	struct crypto_alg *alg;
+	int res;
 
 	info.in_skb = cb->skb;
 	info.out_skb = skb;
 	info.nlmsg_seq = cb->nlh->nlmsg_seq;
 	info.nlmsg_flags = NLM_F_MULTI;
 
+	down_read(&crypto_alg_sem);
 	list_for_each_entry(alg, &crypto_alg_list, cra_list) {
-		err = crypto_report_alg(alg, &info);
-		if (err)
-			goto out_err;
+		if (pos >= start_pos) {
+			res = crypto_report_alg(alg, &info);
+			if (res == -EMSGSIZE)
+				break;
+			if (res)
+				goto out;
+		}
+		pos++;
 	}
-
+	cb->args[0] = pos;
+	res = skb->len;
 out:
-	return skb->len;
-out_err:
-	return err;
+	up_read(&crypto_alg_sem);
+	return res;
 }
 
 static int crypto_dump_report_done(struct netlink_callback *cb)
@@ -503,7 +506,7 @@ static int crypto_user_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
 	if ((type == (CRYPTO_MSG_GETALG - CRYPTO_MSG_BASE) &&
 	    (nlh->nlmsg_flags & NLM_F_DUMP))) {
 		struct crypto_alg *alg;
-		u16 dump_alloc = 0;
+		unsigned long dump_alloc = 0;
 
 		if (link->dump == NULL)
 			return -EINVAL;
@@ -511,16 +514,16 @@ static int crypto_user_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
 		down_read(&crypto_alg_sem);
 		list_for_each_entry(alg, &crypto_alg_list, cra_list)
 			dump_alloc += CRYPTO_REPORT_MAXSIZE;
+		up_read(&crypto_alg_sem);
 
 		{
 			struct netlink_dump_control c = {
 				.dump = link->dump,
 				.done = link->done,
-				.min_dump_alloc = dump_alloc,
+				.min_dump_alloc = min(dump_alloc, 65535UL),
 			};
 			err = netlink_dump_start(crypto_nlsk, skb, nlh, &c);
 		}
-		up_read(&crypto_alg_sem);
 
 		return err;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 017/127] mwifiex: fix potential NULL dereference and use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 1dcd9429212b98bea87fc6ec92fb50bf5953eb47 ]

There are two defects: (1) passing a NULL bss to
mwifiex_save_hidden_ssid_channels will result in NULL dereference,
(2) using bss after dropping the reference to it via cfg80211_put_bss.
To fix them, the patch moves the buggy code to the branch that bss is
not NULL and puts it before cfg80211_put_bss.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 67c3342210777..c013c94fbf15f 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1901,15 +1901,17 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 					    ETH_ALEN))
 					mwifiex_update_curr_bss_params(priv,
 								       bss);
-				cfg80211_put_bss(priv->wdev.wiphy, bss);
-			}
 
-			if ((chan->flags & IEEE80211_CHAN_RADAR) ||
-			    (chan->flags & IEEE80211_CHAN_NO_IR)) {
-				mwifiex_dbg(adapter, INFO,
-					    "radar or passive channel %d\n",
-					    channel);
-				mwifiex_save_hidden_ssid_channels(priv, bss);
+				if ((chan->flags & IEEE80211_CHAN_RADAR) ||
+				    (chan->flags & IEEE80211_CHAN_NO_IR)) {
+					mwifiex_dbg(adapter, INFO,
+						    "radar or passive channel %d\n",
+						    channel);
+					mwifiex_save_hidden_ssid_channels(priv,
+									  bss);
+				}
+
+				cfg80211_put_bss(priv->wdev.wiphy, bss);
 			}
 		}
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.14 018/127] mwifiex: debugfs: correct histogram spacing, formatting

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 4cb777c64e030778c569f605398d7604d8aabc0f ]

Currently, snippets of this file look like:

rx rates (in Mbps): 0=1M   1=2M2=5.5M  3=11M   4=6M   5=9M  6=12M
7=18M  8=24M  9=36M  10=48M  11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)
44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80)
...
noise_flr[--96dBm] = 22
noise_flr[--95dBm] = 149
noise_flr[--94dBm] = 9
noise_flr[--93dBm] = 2

We're missing some spaces, and we're adding a minus sign ('-') on values
that are already negative signed integers.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/debugfs.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/debugfs.c b/drivers/net/wireless/marvell/mwifiex/debugfs.c
index 6f4239be609d0..49ca84ef1a992 100644
--- a/drivers/net/wireless/marvell/mwifiex/debugfs.c
+++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
@@ -296,15 +296,13 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf,
 		     "total samples = %d\n",
 		     atomic_read(&phist_data->num_samples));
 
-	p += sprintf(p, "rx rates (in Mbps): 0=1M   1=2M");
-	p += sprintf(p, "2=5.5M  3=11M   4=6M   5=9M  6=12M\n");
-	p += sprintf(p, "7=18M  8=24M  9=36M  10=48M  11=54M");
-	p += sprintf(p, "12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n");
+	p += sprintf(p,
+		     "rx rates (in Mbps): 0=1M   1=2M 2=5.5M  3=11M   4=6M   5=9M  6=12M\n"
+		     "7=18M  8=24M  9=36M  10=48M  11=54M 12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n");
 
 	if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) {
-		p += sprintf(p, "44-53=MCS0-9(VHT:BW20)");
-		p += sprintf(p, "54-63=MCS0-9(VHT:BW40)");
-		p += sprintf(p, "64-73=MCS0-9(VHT:BW80)\n\n");
+		p += sprintf(p,
+			     "44-53=MCS0-9(VHT:BW20) 54-63=MCS0-9(VHT:BW40) 64-73=MCS0-9(VHT:BW80)\n\n");
 	} else {
 		p += sprintf(p, "\n");
 	}
@@ -333,7 +331,7 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf,
 	for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) {
 		value = atomic_read(&phist_data->noise_flr[i]);
 		if (value)
-			p += sprintf(p, "noise_flr[-%02ddBm] = %d\n",
+			p += sprintf(p, "noise_flr[%02ddBm] = %d\n",
 				(int)(i-128), value);
 	}
 	for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 019/127] rtl818x: fix potential use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit afbb1947db94eacc5a13302eee88a9772fb78935 ]

entry is released via usb_put_urb just after calling usb_submit_urb.
However, entry is used if the submission fails, resulting in a use after
free bug. The patch fixes this.

Signed-off-by: Pan Bian <bianpan2016@163.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
index 9a1d15b3ce453..518caaaf8a987 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
@@ -444,12 +444,13 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
 		skb_queue_tail(&priv->rx_queue, skb);
 		usb_anchor_urb(entry, &priv->anchored);
 		ret = usb_submit_urb(entry, GFP_KERNEL);
-		usb_put_urb(entry);
 		if (ret) {
 			skb_unlink(skb, &priv->rx_queue);
 			usb_unanchor_urb(entry);
+			usb_put_urb(entry);
 			goto err;
 		}
+		usb_put_urb(entry);
 	}
 	return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 020/127] xfs: require both realtime inodes to mount

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 64bafd2f1e484e27071e7584642005d56516cb77 ]

Since mkfs always formats the filesystem with the realtime bitmap and
summary inodes immediately after the root directory, we should expect
that both of them are present and loadable, even if there isn't a
realtime volume attached.  There's no reason to skip this if rbmino ==
NULLFSINO; in fact, this causes an immediate crash if the there /is/ a
realtime volume and someone writes to it.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_rtalloc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 488719d43ca82..cdcb7235e41ae 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -1214,13 +1214,11 @@ xfs_rtmount_inodes(
 	xfs_sb_t	*sbp;
 
 	sbp = &mp->m_sb;
-	if (sbp->sb_rbmino == NULLFSINO)
-		return 0;
 	error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip);
 	if (error)
 		return error;
 	ASSERT(mp->m_rbmip != NULL);
-	ASSERT(sbp->sb_rsumino != NULLFSINO);
+
 	error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip);
 	if (error) {
 		IRELE(mp->m_rbmip);
-- 
2.20.1

[PATCH AUTOSEL 4.14 021/127] ubi: Put MTD device after it is not used

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit b95f83ab762dd6211351b9140f99f43644076ca8 ]

The MTD device reference is dropped via put_mtd_device, however its
field ->index is read and passed to ubi_msg. To fix this, the patch
moves the reference dropping after calling ubi_msg.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/ubi/build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 6445c693d9359..0104d9537329f 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1092,10 +1092,10 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	ubi_wl_close(ubi);
 	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
-	put_mtd_device(ubi->mtd);
 	vfree(ubi->peb_buf);
 	vfree(ubi->fm_buf);
 	ubi_msg(ubi, "mtd%d is detached", ubi->mtd->index);
+	put_mtd_device(ubi->mtd);
 	put_device(&ubi->dev);
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 022/127] ubi: Do not drop UBI device reference before using

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit e542087701f09418702673631a908429feb3eae0 ]

The UBI device reference is dropped but then the device is used as a
parameter of ubi_err. The bug is introduced in changing ubi_err's
behavior. The old ubi_err does not require a UBI device as its first
parameter, but the new one does.

Fixes: 32608703310 ("UBI: Extend UBI layer debug/messaging capabilities")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/ubi/kapi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index d4b2e87444986..c2cf6bd3c162a 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -227,9 +227,9 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 out_free:
 	kfree(desc);
 out_put_ubi:
-	ubi_put_device(ubi);
 	ubi_err(ubi, "cannot open device %d, volume %d, error %d",
 		ubi_num, vol_id, err);
+	ubi_put_device(ubi);
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(ubi_open_volume);
-- 
2.20.1

[PATCH AUTOSEL 4.14 023/127] microblaze: adjust the help to the real behavior

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit bafcc61d998c1ca18f556d92a0e95335ac68c7da ]

"make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
but it is not a real Make target. It does not work because Makefile
assumes "system.unstrip" is the name of DT.

$ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
  [ snip ]
make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'.  Stop.
make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
make: *** Waiting for unfinished jobs....

simpleImage.<dt> works like a phony target that generates multiple
images. Reflect the real behavior. I removed the DT directory path
information because it is already explained a few lines below.

While I am here, I deleted the redundant *_defconfig explanation.

The top-level Makefile caters to list available defconfig files:

  mmu_defconfig            - Build for mmu
  nommu_defconfig          - Build for nommu

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/microblaze/Makefile | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d269dd4b82795..188f07bba0959 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -91,11 +91,11 @@ define archhelp
   echo '* linux.bin    - Create raw binary'
   echo '  linux.bin.gz - Create compressed raw binary'
   echo '  linux.bin.ub - Create U-Boot wrapped raw binary'
-  echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
-  echo '                   - stripped elf with fdt blob'
-  echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
-  echo '  *_defconfig      - Select default config from arch/microblaze/configs'
-  echo ''
+  echo '  simpleImage.<dt> - Create the following images with <dt>.dtb linked in'
+  echo '                    simpleImage.<dt>        : raw image'
+  echo '                    simpleImage.<dt>.ub     : raw image with U-Boot header'
+  echo '                    simpleImage.<dt>.unstrip: ELF (identical to vmlinux)'
+  echo '                    simpleImage.<dt>.strip  : stripped ELF'
   echo '  Targets with <dt> embed a device tree blob inside the image'
   echo '  These targets support board with firmware that does not'
   echo '  support passing a device tree directly. Replace <dt> with the'
-- 
2.20.1

[PATCH AUTOSEL 4.14 024/127] microblaze: move "... is ready" messages to arch/microblaze/Makefile

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 2e14f94cf4bc2f15ca5362e81ca3a987c79e3062 ]

To prepare for more fixes, move this to arch/microblaze/Makefile.
Otherwise, the same "... is ready" would be printed multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/microblaze/Makefile      | 2 ++
 arch/microblaze/boot/Makefile | 4 ----
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 188f07bba0959..fe5e48184c3c2 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -83,9 +83,11 @@ archclean:
 
 linux.bin linux.bin.gz linux.bin.ub: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
 
 simpleImage.%: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
 
 define archhelp
   echo '* linux.bin    - Create raw binary'
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 7c2f52d4a0e45..49dbd1063d717 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -9,15 +9,12 @@ OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
 
 $(obj)/linux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
 $(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
 	$(call if_changed,uimage)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
 $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
 	$(call if_changed,gzip)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
@@ -35,6 +32,5 @@ $(obj)/simpleImage.%: vmlinux FORCE
 	$(call if_changed,objcopy)
 	$(call if_changed,uimage)
 	$(call if_changed,strip,.strip)
-	@echo 'Kernel: $(UIMAGE_OUT) is ready' ' (#'`cat .version`')'
 
 clean-files += simpleImage.*.unstrip linux.bin.ub dts/*.dtb
-- 
2.20.1

[PATCH AUTOSEL 4.14 025/127] iwlwifi: move iwl_nvm_check_version() into dvm

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit 64866e5da1eabd0c52ff45029b245f5465920031 ]

This function is only half-used by mvm (i.e. only the nvm_version part
matters, since the calibration version is irrelevant), so it's
pointless to export it from iwlwifi.  If mvm uses this function, it
has the additional complexity of setting the calib version to a bogus
value on all cfg structs.

To avoid this, move the function to dvm and make a simple comparison
of the nvm_version in mvm instead.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/dvm/main.c | 17 +++++++++++++++++
 .../wireless/intel/iwlwifi/iwl-eeprom-parse.c | 19 -------------------
 .../wireless/intel/iwlwifi/iwl-eeprom-parse.h |  5 ++---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c   |  4 +++-
 4 files changed, 22 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/main.c b/drivers/net/wireless/intel/iwlwifi/dvm/main.c
index 2acd94da9efeb..051a2fea95724 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/main.c
@@ -1229,6 +1229,23 @@ static int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
 	return 0;
 }
 
+static int iwl_nvm_check_version(struct iwl_nvm_data *data,
+				 struct iwl_trans *trans)
+{
+	if (data->nvm_version >= trans->cfg->nvm_ver ||
+	    data->calib_version >= trans->cfg->nvm_calib_ver) {
+		IWL_DEBUG_INFO(trans, "device EEPROM VER=0x%x, CALIB=0x%x\n",
+			       data->nvm_version, data->calib_version);
+		return 0;
+	}
+
+	IWL_ERR(trans,
+		"Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
+		data->nvm_version, trans->cfg->nvm_ver,
+		data->calib_version,  trans->cfg->nvm_calib_ver);
+	return -EINVAL;
+}
+
 static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 						 const struct iwl_cfg *cfg,
 						 const struct iwl_fw *fw,
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
index 3199d345b4274..92727f7e42db7 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
@@ -928,22 +928,3 @@ iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg,
 	return NULL;
 }
 IWL_EXPORT_SYMBOL(iwl_parse_eeprom_data);
-
-/* helper functions */
-int iwl_nvm_check_version(struct iwl_nvm_data *data,
-			     struct iwl_trans *trans)
-{
-	if (data->nvm_version >= trans->cfg->nvm_ver ||
-	    data->calib_version >= trans->cfg->nvm_calib_ver) {
-		IWL_DEBUG_INFO(trans, "device EEPROM VER=0x%x, CALIB=0x%x\n",
-			       data->nvm_version, data->calib_version);
-		return 0;
-	}
-
-	IWL_ERR(trans,
-		"Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
-		data->nvm_version, trans->cfg->nvm_ver,
-		data->calib_version,  trans->cfg->nvm_calib_ver);
-	return -EINVAL;
-}
-IWL_EXPORT_SYMBOL(iwl_nvm_check_version);
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h
index b33888991b946..5545210151cd9 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h
@@ -7,6 +7,7 @@
  *
  * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2018 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -33,6 +34,7 @@
  *
  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2018 Intel Corporation
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -121,9 +123,6 @@ struct iwl_nvm_data *
 iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg,
 		      const u8 *eeprom, size_t eeprom_size);
 
-int iwl_nvm_check_version(struct iwl_nvm_data *data,
-			  struct iwl_trans *trans);
-
 int iwl_init_sband_channels(struct iwl_nvm_data *data,
 			    struct ieee80211_supported_band *sband,
 			    int n_channels, enum nl80211_band band);
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index 534c0ea7b232e..78228f870f8f5 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -501,7 +501,9 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 	if (mvm->nvm_file_name)
 		iwl_mvm_load_nvm_to_nic(mvm);
 
-	WARN_ON(iwl_nvm_check_version(mvm->nvm_data, mvm->trans));
+	WARN_ONCE(mvm->nvm_data->nvm_version < mvm->trans->cfg->nvm_ver,
+		  "Too old NVM version (0x%0x, required = 0x%0x)",
+		  mvm->nvm_data->nvm_version, mvm->trans->cfg->nvm_ver);
 
 	/*
 	 * abort after reading the nvm in case RF Kill is on, we will complete
-- 
2.20.1

[PATCH AUTOSEL 4.14 026/127] gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit c5510b8dafce5f3f5a039c9b262ebcae0092c462 ]

If CONFIG_GPOILIB is not set, the stub of gpio_to_desc() should return
the same type of error as regular version: NULL.  All the callers
compare the return value of gpio_to_desc() against NULL, so returned
ERR_PTR would be treated as non-error case leading to dereferencing of
error value.

Fixes: 79a9becda894 ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/gpio/consumer.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index c4a350d835788..79ad4f8b889dc 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -404,7 +404,7 @@ static inline int gpiod_to_irq(const struct gpio_desc *desc)
 
 static inline struct gpio_desc *gpio_to_desc(unsigned gpio)
 {
-	return ERR_PTR(-EINVAL);
+	return NULL;
 }
 
 static inline int desc_to_gpio(const struct gpio_desc *desc)
-- 
2.20.1

[PATCH AUTOSEL 4.14 027/127] kvm: vmx: Set IA32_TSC_AUX for legacy mode guests

[Sasha Levin]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit 0023ef39dc35c773c436eaa46ca539a26b308b55 ]

RDTSCP is supported in legacy mode as well as long mode. The
IA32_TSC_AUX MSR should be set to the correct guest value before
entering any guest that supports RDTSCP.

Fixes: 4e47c7a6d714 ("KVM: VMX: Add instruction rdtscp support for guest")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index cd5a8e888eb6b..df37901f4a435 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2818,9 +2818,6 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 		index = __find_msr_index(vmx, MSR_CSTAR);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
-		index = __find_msr_index(vmx, MSR_TSC_AUX);
-		if (index >= 0 && guest_cpuid_has(&vmx->vcpu, X86_FEATURE_RDTSCP))
-			move_msr_up(vmx, index, save_nmsrs++);
 		/*
 		 * MSR_STAR is only needed on long mode guests, and only
 		 * if efer.sce is enabled.
@@ -2833,6 +2830,9 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 	index = __find_msr_index(vmx, MSR_EFER);
 	if (index >= 0 && update_transition_efer(vmx, index))
 		move_msr_up(vmx, index, save_nmsrs++);
+	index = __find_msr_index(vmx, MSR_TSC_AUX);
+	if (index >= 0 && guest_cpuid_has(&vmx->vcpu, X86_FEATURE_RDTSCP))
+		move_msr_up(vmx, index, save_nmsrs++);
 
 	vmx->save_nmsrs = save_nmsrs;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 028/127] VSOCK: bind to random port for VMADDR_PORT_ANY

[Sasha Levin]

From: Lepton Wu <ytht.net@gmail.com>

[ Upstream commit 8236b08cf50f85bbfaf48910a0b3ee68318b7c4b ]

The old code always starts from fixed port for VMADDR_PORT_ANY. Sometimes
when VMM crashed, there is still orphaned vsock which is waiting for
close timer, then it could cause connection time out for new started VM
if they are trying to connect to same port with same guest cid since the
new packets could hit that orphaned vsock. We could also fix this by doing
more in vhost_vsock_reset_orphans, but any way, it should be better to start
from a random local port instead of a fixed one.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/af_vsock.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 1939b77e98b72..73eac97e19fb1 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -107,6 +107,7 @@
 #include <linux/mutex.h>
 #include <linux/net.h>
 #include <linux/poll.h>
+#include <linux/random.h>
 #include <linux/skbuff.h>
 #include <linux/smp.h>
 #include <linux/socket.h>
@@ -487,9 +488,13 @@ static void vsock_pending_work(struct work_struct *work)
 static int __vsock_bind_stream(struct vsock_sock *vsk,
 			       struct sockaddr_vm *addr)
 {
-	static u32 port = LAST_RESERVED_PORT + 1;
+	static u32 port = 0;
 	struct sockaddr_vm new_addr;
 
+	if (!port)
+		port = LAST_RESERVED_PORT + 1 +
+			prandom_u32_max(U32_MAX - LAST_RESERVED_PORT);
+
 	vsock_addr_init(&new_addr, addr->svm_cid, addr->svm_port);
 
 	if (addr->svm_port == VMADDR_PORT_ANY) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 029/127] mmc: meson-gx: make sure the descriptor is stopped on errors

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 18f92bc02f1739b5c4d5b70009fbb7eada45bca3 ]

On errors, if we don't stop the descriptor chain, it may continue to
run and raise IRQ after we have called mmc_request_done(). This is bad
because we won't be able to get cmd anymore and properly deal with the
IRQ.

This patch makes sure the descriptor chain is stopped before
calling mmc_request_done()

Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-gx-mmc.c | 73 ++++++++++++++++++++++++++++-----
 1 file changed, 63 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 08a55c2e96e1b..53ce1bb83d2c5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -74,9 +75,11 @@
 #define   CFG_CLK_ALWAYS_ON BIT(18)
 #define   CFG_CHK_DS BIT(20)
 #define   CFG_AUTO_CLK BIT(23)
+#define   CFG_ERR_ABORT BIT(27)
 
 #define SD_EMMC_STATUS 0x48
 #define   STATUS_BUSY BIT(31)
+#define   STATUS_DESC_BUSY BIT(30)
 #define   STATUS_DATI GENMASK(23, 16)
 
 #define SD_EMMC_IRQ_EN 0x4c
@@ -905,6 +908,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
 
 	cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
 	cmd_cfg |= CMD_CFG_OWNER;  /* owned by CPU */
+	cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
 
 	meson_mmc_set_response_bits(cmd, &cmd_cfg);
 
@@ -999,6 +1003,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	u32 irq_en, status, raw_status;
 	irqreturn_t ret = IRQ_NONE;
 
+	irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
+	raw_status = readl(host->regs + SD_EMMC_STATUS);
+	status = raw_status & irq_en;
+
+	if (!status) {
+		dev_dbg(host->dev,
+			"Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
+			 irq_en, raw_status);
+		return IRQ_NONE;
+	}
+
 	if (WARN_ON(!host) || WARN_ON(!host->cmd))
 		return IRQ_NONE;
 
@@ -1006,22 +1021,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 
 	cmd = host->cmd;
 	data = cmd->data;
-	irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
-	raw_status = readl(host->regs + SD_EMMC_STATUS);
-	status = raw_status & irq_en;
-
 	cmd->error = 0;
 	if (status & IRQ_CRC_ERR) {
 		dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
 		cmd->error = -EILSEQ;
-		ret = IRQ_HANDLED;
+		ret = IRQ_WAKE_THREAD;
 		goto out;
 	}
 
 	if (status & IRQ_TIMEOUTS) {
 		dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
 		cmd->error = -ETIMEDOUT;
-		ret = IRQ_HANDLED;
+		ret = IRQ_WAKE_THREAD;
 		goto out;
 	}
 
@@ -1046,17 +1057,49 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	/* ack all enabled interrupts */
 	writel(irq_en, host->regs + SD_EMMC_STATUS);
 
+	if (cmd->error) {
+		/* Stop desc in case of errors */
+		u32 start = readl(host->regs + SD_EMMC_START);
+
+		start &= ~START_DESC_BUSY;
+		writel(start, host->regs + SD_EMMC_START);
+	}
+
 	if (ret == IRQ_HANDLED)
 		meson_mmc_request_done(host->mmc, cmd->mrq);
-	else if (ret == IRQ_NONE)
-		dev_warn(host->dev,
-			 "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
-			 raw_status, irq_en);
 
 	spin_unlock(&host->lock);
 	return ret;
 }
 
+static int meson_mmc_wait_desc_stop(struct meson_host *host)
+{
+	int loop;
+	u32 status;
+
+	/*
+	 * It may sometimes take a while for it to actually halt. Here, we
+	 * are giving it 5ms to comply
+	 *
+	 * If we don't confirm the descriptor is stopped, it might raise new
+	 * IRQs after we have called mmc_request_done() which is bad.
+	 */
+	for (loop = 50; loop; loop--) {
+		status = readl(host->regs + SD_EMMC_STATUS);
+		if (status & (STATUS_BUSY | STATUS_DESC_BUSY))
+			udelay(100);
+		else
+			break;
+	}
+
+	if (status & (STATUS_BUSY | STATUS_DESC_BUSY)) {
+		dev_err(host->dev, "Timed out waiting for host to stop\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 {
 	struct meson_host *host = dev_id;
@@ -1067,6 +1110,13 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	if (WARN_ON(!cmd))
 		return IRQ_NONE;
 
+	if (cmd->error) {
+		meson_mmc_wait_desc_stop(host);
+		meson_mmc_request_done(host->mmc, cmd->mrq);
+
+		return IRQ_HANDLED;
+	}
+
 	data = cmd->data;
 	if (meson_mmc_bounce_buf_read(data)) {
 		xfer_bytes = data->blksz * data->blocks;
@@ -1107,6 +1157,9 @@ static void meson_mmc_cfg_init(struct meson_host *host)
 	cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
 	cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
 
+	/* abort chain on R/W errors */
+	cfg |= CFG_ERR_ABORT;
+
 	writel(cfg, host->regs + SD_EMMC_CFG);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 030/127] mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET

[Sasha Levin]

From: Boris Brezillon <boris.brezillon@bootlin.com>

[ Upstream commit 732774437ae01d9882e60314e303898e63c7f038 ]

The opcodes used by the controller when doing batched page prog should
be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the
default NFC_REG_WCMD_SET value matches the one we set in the driver
which explains why we didn't notice the problem.

Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/sunxi_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 9589748215821..8e52314823976 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1435,7 +1435,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
 	sunxi_nfc_randomizer_enable(mtd);
 
 	writel((NAND_CMD_RNDIN << 8) | NAND_CMD_PAGEPROG,
-	       nfc->regs + NFC_REG_RCMD_SET);
+	       nfc->regs + NFC_REG_WCMD_SET);
 
 	dma_async_issue_pending(nfc->dmac);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 031/127] btrfs: only track ref_heads in delayed_ref_updates

[Sasha Levin]

From: Josef Bacik <jbacik@fb.com>

[ Upstream commit 158ffa364bf723fa1ef128060646d23dc3942994 ]

We use this number to figure out how many delayed refs to run, but
__btrfs_run_delayed_refs really only checks every time we need a new
delayed ref head, so we always run at least one ref head completely no
matter what the number of items on it.  Fix the accounting to only be
adjusted when we add/remove a ref head.

In addition to using this number to limit the number of delayed refs
run, a future patch is also going to use it to calculate the amount of
space required for delayed refs space reservation.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-ref.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c
index 93ffa898df6d8..d56bd36254681 100644
--- a/fs/btrfs/delayed-ref.c
+++ b/fs/btrfs/delayed-ref.c
@@ -195,8 +195,6 @@ static inline void drop_delayed_ref(struct btrfs_trans_handle *trans,
 	ref->in_tree = 0;
 	btrfs_put_delayed_ref(ref);
 	atomic_dec(&delayed_refs->num_entries);
-	if (trans->delayed_ref_updates)
-		trans->delayed_ref_updates--;
 }
 
 static bool merge_ref(struct btrfs_trans_handle *trans,
@@ -458,7 +456,6 @@ add_delayed_ref_tail_merge(struct btrfs_trans_handle *trans,
 	if (ref->action == BTRFS_ADD_DELAYED_REF)
 		list_add_tail(&ref->add_list, &href->ref_add_list);
 	atomic_inc(&root->num_entries);
-	trans->delayed_ref_updates++;
 	spin_unlock(&href->lock);
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 032/127] HID: intel-ish-hid: fixes incorrect error handling

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 6e0856d317440a950b17c00a9283114f025e5699 ]

The memory chunk allocated by hid_allocate_device() should be released
by hid_destroy_device(), not kfree().

Fixes: 0b28cb4bcb1("HID: intel-ish-hid: ISH HID client driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ishtp-hid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/intel-ish-hid/ishtp-hid.c b/drivers/hid/intel-ish-hid/ishtp-hid.c
index cd23903ddcf19..e918d78e541c0 100644
--- a/drivers/hid/intel-ish-hid/ishtp-hid.c
+++ b/drivers/hid/intel-ish-hid/ishtp-hid.c
@@ -222,7 +222,7 @@ int ishtp_hid_probe(unsigned int cur_hid_dev,
 err_hid_device:
 	kfree(hid_data);
 err_hid_data:
-	kfree(hid);
+	hid_destroy_device(hid);
 	return rv;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 033/127] serial: 8250: Rate limit serial port rx interrupts during input overruns

[Sasha Levin]

From: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>

[ Upstream commit 6d7f677a2afa1c82d7fc7af7f9159cbffd5dc010 ]

When a serial port gets faulty or gets flooded with inputs, its interrupt
handler starts to work double time to get the characters to the workqueue
for the tty layer to handle them. When this busy time on the serial/tty
subsystem happens during boot, where it is also busy on the userspace
trying to initialise, some processes can continuously get preempted
and will be on hold until the interrupts subside.

The fix is to backoff on processing received characters for a specified
amount of time when an input overrun is seen (received a new character
before the previous one is processed). This only stops receive and will
continue to transmit characters to serial port. After the backoff period
is done, it receive will be re-enabled. This is optional and will only
be enabled by setting 'overrun-throttle-ms' in the dts.

Signed-off-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_core.c | 25 +++++++++++++++++++++++++
 drivers/tty/serial/8250/8250_fsl.c  | 23 ++++++++++++++++++++++-
 drivers/tty/serial/8250/8250_of.c   |  5 +++++
 include/linux/serial_8250.h         |  4 ++++
 4 files changed, 56 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index d29b512a7d9fa..ceeea4b159c4b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -953,6 +953,21 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	return NULL;
 }
 
+static void serial_8250_overrun_backoff_work(struct work_struct *work)
+{
+	struct uart_8250_port *up =
+	    container_of(to_delayed_work(work), struct uart_8250_port,
+			 overrun_backoff);
+	struct uart_port *port = &up->port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	up->ier |= UART_IER_RLSI | UART_IER_RDI;
+	up->port.read_status_mask |= UART_LSR_DR;
+	serial_out(up, UART_IER, up->ier);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
 /**
  *	serial8250_register_8250_port - register a serial port
  *	@up: serial port template
@@ -1063,6 +1078,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			ret = 0;
 		}
 	}
+
+	/* Initialise interrupt backoff work if required */
+	if (up->overrun_backoff_time_ms > 0) {
+		uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
+		INIT_DELAYED_WORK(&uart->overrun_backoff,
+				  serial_8250_overrun_backoff_work);
+	} else {
+		uart->overrun_backoff_time_ms = 0;
+	}
+
 	mutex_unlock(&serial_mutex);
 
 	return ret;
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 910bfee5a88b7..cc138c24ae889 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -48,8 +48,29 @@ int fsl8250_handle_irq(struct uart_port *port)
 
 	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
 
-	if (lsr & (UART_LSR_DR | UART_LSR_BI))
+	/* Process incoming characters first */
+	if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
+	    (up->ier & (UART_IER_RLSI | UART_IER_RDI))) {
 		lsr = serial8250_rx_chars(up, lsr);
+	}
+
+	/* Stop processing interrupts on input overrun */
+	if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+		unsigned long delay;
+
+		up->ier = port->serial_in(port, UART_IER);
+		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+			port->ops->stop_rx(port);
+		} else {
+			/* Keep restarting the timer until
+			 * the input overrun subsides.
+			 */
+			cancel_delayed_work(&up->overrun_backoff);
+		}
+
+		delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+		schedule_delayed_work(&up->overrun_backoff, delay);
+	}
 
 	serial8250_modem_status(up);
 
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index ec510e342e06c..c51044ba503c3 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -232,6 +232,11 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control"))
 		port8250.capabilities |= UART_CAP_AFE;
 
+	if (of_property_read_u32(ofdev->dev.of_node,
+			"overrun-throttle-ms",
+			&port8250.overrun_backoff_time_ms) != 0)
+		port8250.overrun_backoff_time_ms = 0;
+
 	ret = serial8250_register_8250_port(&port8250);
 	if (ret < 0)
 		goto err_dispose;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a27ef5f564317..791a6be0e3949 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -134,6 +134,10 @@ struct uart_8250_port {
 	void			(*dl_write)(struct uart_8250_port *, int);
 
 	struct uart_8250_em485 *em485;
+
+	/* Serial port overrun backoff */
+	struct delayed_work overrun_backoff;
+	u32 overrun_backoff_time_ms;
 };
 
 static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
-- 
2.20.1

[PATCH AUTOSEL 4.14 034/127] kprobes/x86/xen: blacklist non-attachable xen interrupt functions

[Sasha Levin]

From: Andrea Righi <righi.andrea@gmail.com>

[ Upstream commit bf9445a33ae6ac2f0822d2f1ce1365408387d568 ]

Blacklist symbols in Xen probe-prohibited areas, so that user can see
these prohibited symbols in debugfs.

See also: a50480cb6d61.

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/xen-asm_64.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 3a6feed76dfc1..a93d8a7cef26c 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -12,6 +12,7 @@
 #include <asm/segment.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
+#include <asm/asm.h>
 
 #include <xen/interface/xen.h>
 
@@ -24,6 +25,7 @@ ENTRY(xen_\name)
 	pop %r11
 	jmp  \name
 END(xen_\name)
+_ASM_NOKPROBE(xen_\name)
 .endm
 
 xen_pv_trap divide_error
-- 
2.20.1

[PATCH AUTOSEL 4.14 035/127] xen/pciback: Check dev_data before using it

[Sasha Levin]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 1669907e3d1abfa3f7586e2d55dbbc117b5adba2 ]

If pcistub_init_device fails, the release function will be called with
dev_data set to NULL.  Check it before using it to avoid a NULL pointer
dereference.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xen-pciback/pci_stub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 9e480fdebe1f0..8c250f4a3a97a 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -106,7 +106,8 @@ static void pcistub_device_release(struct kref *kref)
 	 * is called from "unbind" which takes a device_lock mutex.
 	 */
 	__pci_reset_function_locked(dev);
-	if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
+	if (dev_data &&
+	    pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
 		dev_info(&dev->dev, "Could not reload PCI state\n");
 	else
 		pci_restore_state(dev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 036/127] vfio-mdev/samples: Use u8 instead of char for handle functions

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 8ba35b3a0046d6573c98f00461d9bd1b86250d35 ]

Clang warns:

samples/vfio-mdev/mtty.c:592:39: warning: implicit conversion from 'int'
to 'char' changes value from 162 to -94 [-Wconstant-conversion]
                *buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD;
                     ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
1 warning generated.

Turns out that all uses of buf in this function ultimately end up stored
or cast to an unsigned type. Just use u8, which has the same number of
bits but can store this larger number so Clang no longer warns.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/vfio-mdev/mtty.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
index ca495686b9c31..f8c7249fa705d 100644
--- a/samples/vfio-mdev/mtty.c
+++ b/samples/vfio-mdev/mtty.c
@@ -171,7 +171,7 @@ static struct mdev_state *find_mdev_state_by_uuid(uuid_le uuid)
 	return NULL;
 }
 
-void dump_buffer(char *buf, uint32_t count)
+void dump_buffer(u8 *buf, uint32_t count)
 {
 #if defined(DEBUG)
 	int i;
@@ -250,7 +250,7 @@ static void mtty_create_config_space(struct mdev_state *mdev_state)
 }
 
 static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
-				 char *buf, u32 count)
+				 u8 *buf, u32 count)
 {
 	u32 cfg_addr, bar_mask, bar_index = 0;
 
@@ -304,7 +304,7 @@ static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
 }
 
 static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
-				u16 offset, char *buf, u32 count)
+				u16 offset, u8 *buf, u32 count)
 {
 	u8 data = *buf;
 
@@ -475,7 +475,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
 }
 
 static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state,
-			    u16 offset, char *buf, u32 count)
+			    u16 offset, u8 *buf, u32 count)
 {
 	/* Handle read requests by guest */
 	switch (offset) {
@@ -650,7 +650,7 @@ static void mdev_read_base(struct mdev_state *mdev_state)
 	}
 }
 
-static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
+static ssize_t mdev_access(struct mdev_device *mdev, u8 *buf, size_t count,
 			   loff_t pos, bool is_write)
 {
 	struct mdev_state *mdev_state;
@@ -698,7 +698,7 @@ static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
 #if defined(DEBUG_REGS)
 			pr_info("%s: BAR%d  WR @0x%llx %s val:0x%02x dlab:%d\n",
 				__func__, index, offset, wr_reg[offset],
-				(u8)*buf, mdev_state->s[index].dlab);
+				*buf, mdev_state->s[index].dlab);
 #endif
 			handle_bar_write(index, mdev_state, offset, buf, count);
 		} else {
@@ -708,7 +708,7 @@ static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
 #if defined(DEBUG_REGS)
 			pr_info("%s: BAR%d  RD @0x%llx %s val:0x%02x dlab:%d\n",
 				__func__, index, offset, rd_reg[offset],
-				(u8)*buf, mdev_state->s[index].dlab);
+				*buf, mdev_state->s[index].dlab);
 #endif
 		}
 		break;
@@ -827,7 +827,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
 		if (count >= 4 && !(*ppos % 4)) {
 			u32 val;
 
-			ret =  mdev_access(mdev, (char *)&val, sizeof(val),
+			ret =  mdev_access(mdev, (u8 *)&val, sizeof(val),
 					   *ppos, false);
 			if (ret <= 0)
 				goto read_err;
@@ -839,7 +839,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
 		} else if (count >= 2 && !(*ppos % 2)) {
 			u16 val;
 
-			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+			ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
 					  *ppos, false);
 			if (ret <= 0)
 				goto read_err;
@@ -851,7 +851,7 @@ ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
 		} else {
 			u8 val;
 
-			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+			ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
 					  *ppos, false);
 			if (ret <= 0)
 				goto read_err;
@@ -889,7 +889,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
 			if (copy_from_user(&val, buf, sizeof(val)))
 				goto write_err;
 
-			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+			ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
 					  *ppos, true);
 			if (ret <= 0)
 				goto write_err;
@@ -901,7 +901,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
 			if (copy_from_user(&val, buf, sizeof(val)))
 				goto write_err;
 
-			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+			ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
 					  *ppos, true);
 			if (ret <= 0)
 				goto write_err;
@@ -913,7 +913,7 @@ ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
 			if (copy_from_user(&val, buf, sizeof(val)))
 				goto write_err;
 
-			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+			ret = mdev_access(mdev, (u8 *)&val, sizeof(val),
 					  *ppos, true);
 			if (ret <= 0)
 				goto write_err;
-- 
2.20.1

[PATCH AUTOSEL 4.14 037/127] pinctrl: xway: fix gpio-hog related boot issues

[Sasha Levin]

From: Martin Schiller <ms@dev.tdt.de>

[ Upstream commit 9b4924da4711674e62d97d4f5360446cc78337af ]

This patch is based on commit a86caa9ba5d7 ("pinctrl: msm: fix gpio-hog
related boot issues").

It fixes the issue that the gpio ranges needs to be defined before
gpiochip_add().

Therefore, we also have to swap the order of registering the pinctrl
driver and registering the gpio chip.

You also have to add the "gpio-ranges" property to the pinctrl device
node to get it finally working.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-xway.c | 39 +++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
index f9e98a7d4f0ce..1b0c5958c56a7 100644
--- a/drivers/pinctrl/pinctrl-xway.c
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -1748,14 +1748,6 @@ static int pinmux_xway_probe(struct platform_device *pdev)
 	}
 	xway_pctrl_desc.pins = xway_info.pads;
 
-	/* register the gpio chip */
-	xway_chip.parent = &pdev->dev;
-	ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register gpio chip\n");
-		return ret;
-	}
-
 	/* setup the data needed by pinctrl */
 	xway_pctrl_desc.name	= dev_name(&pdev->dev);
 	xway_pctrl_desc.npins	= xway_chip.ngpio;
@@ -1777,10 +1769,33 @@ static int pinmux_xway_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* finish with registering the gpio range in pinctrl */
-	xway_gpio_range.npins = xway_chip.ngpio;
-	xway_gpio_range.base = xway_chip.base;
-	pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
+	/* register the gpio chip */
+	xway_chip.parent = &pdev->dev;
+	xway_chip.owner = THIS_MODULE;
+	xway_chip.of_node = pdev->dev.of_node;
+	ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register gpio chip\n");
+		return ret;
+	}
+
+	/*
+	 * For DeviceTree-supported systems, the gpio core checks the
+	 * pinctrl's device node for the "gpio-ranges" property.
+	 * If it is present, it takes care of adding the pin ranges
+	 * for the driver. In this case the driver can skip ahead.
+	 *
+	 * In order to remain compatible with older, existing DeviceTree
+	 * files which don't set the "gpio-ranges" property or systems that
+	 * utilize ACPI the driver has to call gpiochip_add_pin_range().
+	 */
+	if (!of_property_read_bool(pdev->dev.of_node, "gpio-ranges")) {
+		/* finish with registering the gpio range in pinctrl */
+		xway_gpio_range.npins = xway_chip.ngpio;
+		xway_gpio_range.base = xway_chip.base;
+		pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
+	}
+
 	dev_info(&pdev->dev, "Init done\n");
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 038/127] net/mlx5: Continue driver initialization despite debugfs failure

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 199fa087dc6b503baad06712716fac645a983e8a ]

The failure to create debugfs entry is unpleasant event, but not enough
to abort drier initialization. Align the mlx5_core code to debugfs design
and continue execution whenever debugfs_create_dir() successes or not.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 97874c2568fc9..1ac0e173da12c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -838,11 +838,9 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
 
 	priv->numa_node = dev_to_node(&dev->pdev->dev);
 
-	priv->dbg_root = debugfs_create_dir(dev_name(&pdev->dev), mlx5_debugfs_root);
-	if (!priv->dbg_root) {
-		dev_err(&pdev->dev, "Cannot create debugfs dir, aborting\n");
-		return -ENOMEM;
-	}
+	if (mlx5_debugfs_root)
+		priv->dbg_root =
+			debugfs_create_dir(pci_name(pdev), mlx5_debugfs_root);
 
 	err = mlx5_pci_enable_device(dev);
 	if (err) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 039/127] exofs_mount(): fix leaks on failure exits

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 26cb5a328c6b2bda9e859307ce4cfc60df3a2c28 ]

... and don't abuse mount_nodev(), while we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/exofs/super.c | 37 +++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)

diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index c9ec652e2fcd2..881d5798a1814 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -702,21 +702,18 @@ static int exofs_read_lookup_dev_table(struct exofs_sb_info *sbi,
 /*
  * Read the superblock from the OSD and fill in the fields
  */
-static int exofs_fill_super(struct super_block *sb, void *data, int silent)
+static int exofs_fill_super(struct super_block *sb,
+				struct exofs_mountopt *opts,
+				struct exofs_sb_info *sbi,
+				int silent)
 {
 	struct inode *root;
-	struct exofs_mountopt *opts = data;
-	struct exofs_sb_info *sbi;	/*extended info                  */
 	struct osd_dev *od;		/* Master device                 */
 	struct exofs_fscb fscb;		/*on-disk superblock info        */
 	struct ore_comp comp;
 	unsigned table_count;
 	int ret;
 
-	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
-	if (!sbi)
-		return -ENOMEM;
-
 	/* use mount options to fill superblock */
 	if (opts->is_osdname) {
 		struct osd_dev_info odi = {.systemid_len = 0};
@@ -860,7 +857,9 @@ static struct dentry *exofs_mount(struct file_system_type *type,
 			  int flags, const char *dev_name,
 			  void *data)
 {
+	struct super_block *s;
 	struct exofs_mountopt opts;
+	struct exofs_sb_info *sbi;
 	int ret;
 
 	ret = parse_options(data, &opts);
@@ -869,9 +868,31 @@ static struct dentry *exofs_mount(struct file_system_type *type,
 		return ERR_PTR(ret);
 	}
 
+	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
+	if (!sbi) {
+		kfree(opts.dev_name);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	s = sget(type, NULL, set_anon_super, flags, NULL);
+
+	if (IS_ERR(s)) {
+		kfree(opts.dev_name);
+		kfree(sbi);
+		return ERR_CAST(s);
+	}
+
 	if (!opts.dev_name)
 		opts.dev_name = dev_name;
-	return mount_nodev(type, flags, &opts, exofs_fill_super);
+
+
+	ret = exofs_fill_super(s, &opts, sbi, flags & SB_SILENT ? 1 : 0);
+	if (ret) {
+		deactivate_locked_super(s);
+		return ERR_PTR(ret);
+	}
+	s->s_flags |= SB_ACTIVE;
+	return dget(s->s_root);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.14 040/127] bnxt_en: Return linux standard errors in bnxt_ethtool.c

[Sasha Levin]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit 7c675421afef18253a86ffc383f57bc15ef32ea8 ]

Currently firmware specific errors are returned directly in flash_device
and reset ethtool hooks. Modify it to return linux standard errors
to userspace when flashing operations fail.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 56 +++++++++++++------
 1 file changed, 39 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index a22336fef66b2..4879371ad0c75 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1339,14 +1339,22 @@ static int bnxt_flash_nvram(struct net_device *dev,
 	rc = hwrm_send_message(bp, &req, sizeof(req), FLASH_NVRAM_TIMEOUT);
 	dma_free_coherent(&bp->pdev->dev, data_len, kmem, dma_handle);
 
+	if (rc == HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED) {
+		netdev_info(dev,
+			    "PF does not have admin privileges to flash the device\n");
+		rc = -EACCES;
+	} else if (rc) {
+		rc = -EIO;
+	}
 	return rc;
 }
 
 static int bnxt_firmware_reset(struct net_device *dev,
 			       u16 dir_type)
 {
-	struct bnxt *bp = netdev_priv(dev);
 	struct hwrm_fw_reset_input req = {0};
+	struct bnxt *bp = netdev_priv(dev);
+	int rc;
 
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FW_RESET, -1, -1);
 
@@ -1380,7 +1388,15 @@ static int bnxt_firmware_reset(struct net_device *dev,
 		return -EINVAL;
 	}
 
-	return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	if (rc == HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED) {
+		netdev_info(dev,
+			    "PF does not have admin privileges to reset the device\n");
+		rc = -EACCES;
+	} else if (rc) {
+		rc = -EIO;
+	}
+	return rc;
 }
 
 static int bnxt_flash_firmware(struct net_device *dev,
@@ -1587,9 +1603,9 @@ static int bnxt_flash_package_from_file(struct net_device *dev,
 	struct hwrm_nvm_install_update_output *resp = bp->hwrm_cmd_resp_addr;
 	struct hwrm_nvm_install_update_input install = {0};
 	const struct firmware *fw;
+	int rc, hwrm_err = 0;
 	u32 item_len;
 	u16 index;
-	int rc;
 
 	bnxt_hwrm_fw_set_time(bp);
 
@@ -1632,15 +1648,16 @@ static int bnxt_flash_package_from_file(struct net_device *dev,
 			memcpy(kmem, fw->data, fw->size);
 			modify.host_src_addr = cpu_to_le64(dma_handle);
 
-			rc = hwrm_send_message(bp, &modify, sizeof(modify),
-					       FLASH_PACKAGE_TIMEOUT);
+			hwrm_err = hwrm_send_message(bp, &modify,
+						     sizeof(modify),
+						     FLASH_PACKAGE_TIMEOUT);
 			dma_free_coherent(&bp->pdev->dev, fw->size, kmem,
 					  dma_handle);
 		}
 	}
 	release_firmware(fw);
-	if (rc)
-		return rc;
+	if (rc || hwrm_err)
+		goto err_exit;
 
 	if ((install_type & 0xffff) == 0)
 		install_type >>= 16;
@@ -1648,12 +1665,10 @@ static int bnxt_flash_package_from_file(struct net_device *dev,
 	install.install_type = cpu_to_le32(install_type);
 
 	mutex_lock(&bp->hwrm_cmd_lock);
-	rc = _hwrm_send_message(bp, &install, sizeof(install),
-				INSTALL_PACKAGE_TIMEOUT);
-	if (rc) {
-		rc = -EOPNOTSUPP;
+	hwrm_err = _hwrm_send_message(bp, &install, sizeof(install),
+				      INSTALL_PACKAGE_TIMEOUT);
+	if (hwrm_err)
 		goto flash_pkg_exit;
-	}
 
 	if (resp->error_code) {
 		u8 error_code = ((struct hwrm_err_output *)resp)->cmd_err;
@@ -1661,12 +1676,11 @@ static int bnxt_flash_package_from_file(struct net_device *dev,
 		if (error_code == NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR) {
 			install.flags |= cpu_to_le16(
 			       NVM_INSTALL_UPDATE_REQ_FLAGS_ALLOWED_TO_DEFRAG);
-			rc = _hwrm_send_message(bp, &install, sizeof(install),
-						INSTALL_PACKAGE_TIMEOUT);
-			if (rc) {
-				rc = -EOPNOTSUPP;
+			hwrm_err = _hwrm_send_message(bp, &install,
+						      sizeof(install),
+						      INSTALL_PACKAGE_TIMEOUT);
+			if (hwrm_err)
 				goto flash_pkg_exit;
-			}
 		}
 	}
 
@@ -1677,6 +1691,14 @@ static int bnxt_flash_package_from_file(struct net_device *dev,
 	}
 flash_pkg_exit:
 	mutex_unlock(&bp->hwrm_cmd_lock);
+err_exit:
+	if (hwrm_err == HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED) {
+		netdev_info(dev,
+			    "PF does not have admin privileges to flash the device\n");
+		rc = -EACCES;
+	} else if (hwrm_err) {
+		rc = -EOPNOTSUPP;
+	}
 	return rc;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 041/127] bnxt_en: query force speeds before disabling autoneg mode.

[Sasha Levin]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit 56d374624778652d2a999e18c87a25338b127b41 ]

With autoneg enabled, PHY loopback test fails. To disable autoneg,
driver needs to send a valid forced speed to FW. FW is not sending
async event for invalid speeds. To fix this, query forced speeds
and send the correct speed when disabling autoneg mode.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 4879371ad0c75..fc8e185718a1d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2258,17 +2258,37 @@ static int bnxt_hwrm_mac_loopback(struct bnxt *bp, bool enable)
 	return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
 }
 
+static int bnxt_query_force_speeds(struct bnxt *bp, u16 *force_speeds)
+{
+	struct hwrm_port_phy_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
+	struct hwrm_port_phy_qcaps_input req = {0};
+	int rc;
+
+	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_PORT_PHY_QCAPS, -1, -1);
+	mutex_lock(&bp->hwrm_cmd_lock);
+	rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	if (!rc)
+		*force_speeds = le16_to_cpu(resp->supported_speeds_force_mode);
+
+	mutex_unlock(&bp->hwrm_cmd_lock);
+	return rc;
+}
+
 static int bnxt_disable_an_for_lpbk(struct bnxt *bp,
 				    struct hwrm_port_phy_cfg_input *req)
 {
 	struct bnxt_link_info *link_info = &bp->link_info;
-	u16 fw_advertising = link_info->advertising;
+	u16 fw_advertising;
 	u16 fw_speed;
 	int rc;
 
 	if (!link_info->autoneg)
 		return 0;
 
+	rc = bnxt_query_force_speeds(bp, &fw_advertising);
+	if (rc)
+		return rc;
+
 	fw_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_1GB;
 	if (netif_carrier_ok(bp->dev))
 		fw_speed = bp->link_info.link_speed;
-- 
2.20.1

[PATCH AUTOSEL 4.14 042/127] KVM: s390: unregister debug feature on failing arch init

[Sasha Levin]

From: Michael Mueller <mimu@linux.ibm.com>

[ Upstream commit 308c3e6673b012beecb96ef04cc65f4a0e7cdd99 ]

Make sure the debug feature and its allocated resources get
released upon unsuccessful architecture initialization.

A related indication of the issue will be reported as kernel
message.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181130143215.69496-2-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/kvm-s390.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ff62a4fe2159a..91c24e87fe10a 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -361,19 +361,30 @@ static void kvm_s390_cpu_feat_init(void)
 
 int kvm_arch_init(void *opaque)
 {
+	int rc;
+
 	kvm_s390_dbf = debug_register("kvm-trace", 32, 1, 7 * sizeof(long));
 	if (!kvm_s390_dbf)
 		return -ENOMEM;
 
 	if (debug_register_view(kvm_s390_dbf, &debug_sprintf_view)) {
-		debug_unregister(kvm_s390_dbf);
-		return -ENOMEM;
+		rc = -ENOMEM;
+		goto out_debug_unreg;
 	}
 
 	kvm_s390_cpu_feat_init();
 
 	/* Register floating interrupt controller interface. */
-	return kvm_register_device_ops(&kvm_flic_ops, KVM_DEV_TYPE_FLIC);
+	rc = kvm_register_device_ops(&kvm_flic_ops, KVM_DEV_TYPE_FLIC);
+	if (rc) {
+		pr_err("Failed to register FLIC rc=%d\n", rc);
+		goto out_debug_unreg;
+	}
+	return 0;
+
+out_debug_unreg:
+	debug_unregister(kvm_s390_dbf);
+	return rc;
 }
 
 void kvm_arch_exit(void)
-- 
2.20.1

[PATCH AUTOSEL 4.14 043/127] pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 1b99d0c80bbe1810572c2cb77b90f67886adfa8d ]

The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.

The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.

Fixes: a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
index 8070765311dbf..e1c34e19222ee 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
@@ -1716,6 +1716,9 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	},
 
 	{ PINMUX_CFG_REG("PFCR3", 0xfffe38a8, 16, 4) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		PF12MD_000, PF12MD_001, 0, PF12MD_011,
 		PF12MD_100, PF12MD_101, 0, 0,
 		0, 0, 0, 0, 0, 0, 0, 0 }
@@ -1759,8 +1762,10 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
 		PF1MD_100, PF1MD_101, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0
-	 }
+		0, 0, 0, 0, 0, 0, 0, 0,
+		PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
+		PF0MD_100, PF0MD_101, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0 }
 	},
 
 	{ PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 044/127] pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 054f2400f706327f96770219c3065b5131f8f154 ]

Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.

Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh7734.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
index 6502e676d3686..33232041ee86d 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
@@ -2213,22 +2213,22 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    /* IP10_22 [1] */
 		FN_CAN_CLK_A, FN_RX4_D,
 	    /* IP10_21_19 [3] */
-		FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B,
-		FN_LCD_M_DISP_B, 0, 0, 0,
+		FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,
+		FN_LCD_M_DISP_B, 0, 0,
 	    /* IP10_18_16 [3] */
-		FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B,
-		FN_LCD_VEPWC_B, 0, 0, 0,
+		FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
+		FN_LCD_VEPWC_B, 0, 0,
 	    /* IP10_15 [1] */
 		FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
 	    /* IP10_14_12 [3] */
 		FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
 		FN_LCD_FLM_B, 0, 0, 0,
 	    /* IP10_11_9 [3] */
-		FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B,
-		FN_LCD_CL2_B, 0, 0, 0,
+		FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
+		FN_LCD_CL2_B, 0, 0,
 	    /* IP10_8_6 [3] */
-		FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B,
-		FN_LCD_CL1_B, 0, 0, 0,
+		FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
+		FN_LCD_CL1_B, 0, 0,
 	    /* IP10_5_3 [3] */
 		FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
 		FN_LCD_DON_B, 0, 0, 0,
-- 
2.20.1

[PATCH AUTOSEL 4.14 045/127] HID: doc: fix wrong data structure reference for UHID_OUTPUT

[Sasha Levin]

From: Peter Hutterer <peter.hutterer@who-t.net>

[ Upstream commit 46b14eef59a8157138dc02f916a7f97c73b3ec53 ]

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/hid/uhid.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt
index c8656dd029a91..958fff9453044 100644
--- a/Documentation/hid/uhid.txt
+++ b/Documentation/hid/uhid.txt
@@ -160,7 +160,7 @@ them but you should handle them according to your needs.
   UHID_OUTPUT:
   This is sent if the HID device driver wants to send raw data to the I/O
   device on the interrupt channel. You should read the payload and forward it to
-  the device. The payload is of type "struct uhid_data_req".
+  the device. The payload is of type "struct uhid_output_req".
   This may be received even though you haven't received UHID_OPEN, yet.
 
   UHID_GET_REPORT:
-- 
2.20.1

[PATCH AUTOSEL 4.14 046/127] dm flakey: Properly corrupt multi-page bios.

[Sasha Levin]

From: Sweet Tea <sweettea@redhat.com>

[ Upstream commit a00f5276e26636cbf72f24f79831026d2e2868e7 ]

The flakey target is documented to be able to corrupt the Nth byte in
a bio, but does not corrupt byte indices after the first biovec in the
bio. Change the corrupting function to actually corrupt the Nth byte
no matter in which biovec that index falls.

A test device generating two-page bios, atop a flakey device configured
to corrupt a byte index on the second page, verified both the failure
to corrupt before this patch and the expected corruption after this
change.

Signed-off-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-flakey.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 0c1ef63c3461b..b1b68e01b889c 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -282,20 +282,31 @@ static void flakey_map_bio(struct dm_target *ti, struct bio *bio)
 
 static void corrupt_bio_data(struct bio *bio, struct flakey_c *fc)
 {
-	unsigned bio_bytes = bio_cur_bytes(bio);
-	char *data = bio_data(bio);
+	unsigned int corrupt_bio_byte = fc->corrupt_bio_byte - 1;
+
+	struct bvec_iter iter;
+	struct bio_vec bvec;
+
+	if (!bio_has_data(bio))
+		return;
 
 	/*
-	 * Overwrite the Nth byte of the data returned.
+	 * Overwrite the Nth byte of the bio's data, on whichever page
+	 * it falls.
 	 */
-	if (data && bio_bytes >= fc->corrupt_bio_byte) {
-		data[fc->corrupt_bio_byte - 1] = fc->corrupt_bio_value;
-
-		DMDEBUG("Corrupting data bio=%p by writing %u to byte %u "
-			"(rw=%c bi_opf=%u bi_sector=%llu cur_bytes=%u)\n",
-			bio, fc->corrupt_bio_value, fc->corrupt_bio_byte,
-			(bio_data_dir(bio) == WRITE) ? 'w' : 'r', bio->bi_opf,
-			(unsigned long long)bio->bi_iter.bi_sector, bio_bytes);
+	bio_for_each_segment(bvec, bio, iter) {
+		if (bio_iter_len(bio, iter) > corrupt_bio_byte) {
+			char *segment = (page_address(bio_iter_page(bio, iter))
+					 + bio_iter_offset(bio, iter));
+			segment[corrupt_bio_byte] = fc->corrupt_bio_value;
+			DMDEBUG("Corrupting data bio=%p by writing %u to byte %u "
+				"(rw=%c bi_opf=%u bi_sector=%llu size=%u)\n",
+				bio, fc->corrupt_bio_value, fc->corrupt_bio_byte,
+				(bio_data_dir(bio) == WRITE) ? 'w' : 'r', bio->bi_opf,
+				(unsigned long long)bio->bi_iter.bi_sector, bio->bi_iter.bi_size);
+			break;
+		}
+		corrupt_bio_byte -= bio_iter_len(bio, iter);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 047/127] gfs2: take jdata unstuff into account in do_grow

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit bc0205612bbd4dd4026d4ba6287f5643c37366ec ]

Before this patch, function do_grow would not reserve enough journal
blocks in the transaction to unstuff jdata files while growing them.
This patch adds the logic to add one more block if the file to grow
is jdata.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 09432b25fe9b8..b3a1b16d4e3e3 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1445,6 +1445,8 @@ static int do_grow(struct inode *inode, u64 size)
 	}
 
 	error = gfs2_trans_begin(sdp, RES_DINODE + RES_STATFS + RES_RG_BIT +
+				 (unstuff &&
+				  gfs2_is_jdata(ip) ? RES_JDATA : 0) +
 				 (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF ?
 				  0 : RES_QUOTA), 0);
 	if (error)
-- 
2.20.1

[PATCH AUTOSEL 4.14 048/127] xfs: Align compat attrlist_by_handle with native implementation.

[Sasha Levin]

From: Nick Bowler <nbowler@draconx.ca>

[ Upstream commit c456d64449efe37da50832b63d91652a85ea1d20 ]

While inspecting the ioctl implementations, I noticed that the compat
implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the
same thing as the native implementation.  Specifically, the "cursor"
does not appear to be written out to userspace on the compat path,
like it is on the native path.

This adjusts the compat implementation to copy out the cursor just
like the native implementation does.  The attrlist cursor does not
require any special compat handling.  This fixes xfstests xfs/269
on both IA-32 and x32 userspace, when running on an amd64 kernel.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: 0facef7fb053b ("xfs: in _attrlist_by_handle, copy the cursor back to userspace")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_ioctl32.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/xfs/xfs_ioctl32.c b/fs/xfs/xfs_ioctl32.c
index fa0bc4d46065a..d3c0e4b8bf421 100644
--- a/fs/xfs/xfs_ioctl32.c
+++ b/fs/xfs/xfs_ioctl32.c
@@ -347,6 +347,7 @@ xfs_compat_attrlist_by_handle(
 {
 	int			error;
 	attrlist_cursor_kern_t	*cursor;
+	compat_xfs_fsop_attrlist_handlereq_t __user *p = arg;
 	compat_xfs_fsop_attrlist_handlereq_t al_hreq;
 	struct dentry		*dentry;
 	char			*kbuf;
@@ -381,6 +382,11 @@ xfs_compat_attrlist_by_handle(
 	if (error)
 		goto out_kfree;
 
+	if (copy_to_user(&p->pos, cursor, sizeof(attrlist_cursor_kern_t))) {
+		error = -EFAULT;
+		goto out_kfree;
+	}
+
 	if (copy_to_user(compat_ptr(al_hreq.buffer), kbuf, al_hreq.buflen))
 		error = -EFAULT;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 049/127] xfs: Fix bulkstat compat ioctls on x32 userspace.

[Sasha Levin]

From: Nick Bowler <nbowler@draconx.ca>

[ Upstream commit 7ca860e3c1a74ad6bd8949364073ef1044cad758 ]

The bulkstat family of ioctls are problematic on x32, because there is
a mixup of native 32-bit and 64-bit conventions.  The xfs_fsop_bulkreq
struct contains pointers and 32-bit integers so that matches the native
32-bit layout, and that means the ioctl implementation goes into the
regular compat path on x32.

However, the 'ubuffer' member of that struct in turn refers to either
struct xfs_inogrp or xfs_bstat (or an array of these).  On x32, those
structures match the native 64-bit layout.  The compat implementation
writes out the 32-bit version of these structures.  This is not the
expected format for x32 userspace, causing problems.

Fortunately the functions which actually output these xfs_inogrp and
xfs_bstat structures have an easy way to select which output format
is required, so we just need a little tweak to select the right format
on x32.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_ioctl32.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/fs/xfs/xfs_ioctl32.c b/fs/xfs/xfs_ioctl32.c
index d3c0e4b8bf421..5f616a6a5358d 100644
--- a/fs/xfs/xfs_ioctl32.c
+++ b/fs/xfs/xfs_ioctl32.c
@@ -252,6 +252,32 @@ xfs_compat_ioc_bulkstat(
 	int			done;
 	int			error;
 
+	/*
+	 * Output structure handling functions.  Depending on the command,
+	 * either the xfs_bstat and xfs_inogrp structures are written out
+	 * to userpace memory via bulkreq.ubuffer.  Normally the compat
+	 * functions and structure size are the correct ones to use ...
+	 */
+	inumbers_fmt_pf inumbers_func = xfs_inumbers_fmt_compat;
+	bulkstat_one_pf	bs_one_func = xfs_bulkstat_one_compat;
+	size_t bs_one_size = sizeof(struct compat_xfs_bstat);
+
+#ifdef CONFIG_X86_X32
+	if (in_x32_syscall()) {
+		/*
+		 * ... but on x32 the input xfs_fsop_bulkreq has pointers
+		 * which must be handled in the "compat" (32-bit) way, while
+		 * the xfs_bstat and xfs_inogrp structures follow native 64-
+		 * bit layout convention.  So adjust accordingly, otherwise
+		 * the data written out in compat layout will not match what
+		 * x32 userspace expects.
+		 */
+		inumbers_func = xfs_inumbers_fmt;
+		bs_one_func = xfs_bulkstat_one;
+		bs_one_size = sizeof(struct xfs_bstat);
+	}
+#endif
+
 	/* done = 1 if there are more stats to get and if bulkstat */
 	/* should be called again (unused here, but used in dmapi) */
 
@@ -283,15 +309,15 @@ xfs_compat_ioc_bulkstat(
 
 	if (cmd == XFS_IOC_FSINUMBERS_32) {
 		error = xfs_inumbers(mp, &inlast, &count,
-				bulkreq.ubuffer, xfs_inumbers_fmt_compat);
+				bulkreq.ubuffer, inumbers_func);
 	} else if (cmd == XFS_IOC_FSBULKSTAT_SINGLE_32) {
 		int res;
 
-		error = xfs_bulkstat_one_compat(mp, inlast, bulkreq.ubuffer,
-				sizeof(compat_xfs_bstat_t), NULL, &res);
+		error = bs_one_func(mp, inlast, bulkreq.ubuffer,
+				bs_one_size, NULL, &res);
 	} else if (cmd == XFS_IOC_FSBULKSTAT_32) {
 		error = xfs_bulkstat(mp, &inlast, &count,
-			xfs_bulkstat_one_compat, sizeof(compat_xfs_bstat_t),
+			bs_one_func, bs_one_size,
 			bulkreq.ubuffer, &done);
 	} else
 		error = -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.14 050/127] IB/qib: Fix an error code in qib_sdma_verbs_send()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5050ae5fa3d54c8e83e1e447cc7e3591110a7f57 ]

We accidentally return success on this error path.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qib/qib_sdma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/qib/qib_sdma.c b/drivers/infiniband/hw/qib/qib_sdma.c
index 891873b38a1e6..5f3f197678b78 100644
--- a/drivers/infiniband/hw/qib/qib_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_sdma.c
@@ -600,8 +600,10 @@ int qib_sdma_verbs_send(struct qib_pportdata *ppd,
 		dw = (len + 3) >> 2;
 		addr = dma_map_single(&ppd->dd->pcidev->dev, sge->vaddr,
 				      dw << 2, DMA_TO_DEVICE);
-		if (dma_mapping_error(&ppd->dd->pcidev->dev, addr))
+		if (dma_mapping_error(&ppd->dd->pcidev->dev, addr)) {
+			ret = -ENOMEM;
 			goto unmap;
+		}
 		sdmadesc[0] = 0;
 		make_sdma_desc(ppd, sdmadesc, (u64) addr, dw, dwoffset);
 		/* SDmaUseLargeBuf has to be set in every descriptor */
-- 
2.20.1

[PATCH AUTOSEL 4.14 051/127] clocksource/drivers/fttmr010: Fix invalid interrupt register access

[Sasha Levin]

From: Tao Ren <taoren@fb.com>

[ Upstream commit 86fe57fc47b17b3528fa5497fc57e158d846c4ea ]

TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed
for masking interrupts on ast2500 chips, and it's not even listed in
ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed
chips.

Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is
not interrupt status register on ast2400 and ast2500 chips. Although
there is no side effect to reset the register in fttmr010_common_init(),
it's just misleading to do so.

Besides, "count_down" is renamed to "is_aspeed" in "fttmr010" structure,
and more comments are added so the code is more readble.

Signed-off-by: Tao Ren <taoren@fb.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-fttmr010.c | 73 ++++++++++++++++------------
 1 file changed, 42 insertions(+), 31 deletions(-)

diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index cdfe1c82f3f00..3928f3999015e 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -21,7 +21,7 @@
 #include <linux/delay.h>
 
 /*
- * Register definitions for the timers
+ * Register definitions common for all the timer variants.
  */
 #define TIMER1_COUNT		(0x00)
 #define TIMER1_LOAD		(0x04)
@@ -36,9 +36,10 @@
 #define TIMER3_MATCH1		(0x28)
 #define TIMER3_MATCH2		(0x2c)
 #define TIMER_CR		(0x30)
-#define TIMER_INTR_STATE	(0x34)
-#define TIMER_INTR_MASK		(0x38)
 
+/*
+ * Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
+ */
 #define TIMER_1_CR_ENABLE	BIT(0)
 #define TIMER_1_CR_CLOCK	BIT(1)
 #define TIMER_1_CR_INT		BIT(2)
@@ -53,8 +54,9 @@
 #define TIMER_3_CR_UPDOWN	BIT(11)
 
 /*
- * The Aspeed AST2400 moves bits around in the control register
- * and lacks bits for setting the timer to count upwards.
+ * Control register (TMC30) bit fields for aspeed ast2400/ast2500 timers.
+ * The aspeed timers move bits around in the control register and lacks
+ * bits for setting the timer to count upwards.
  */
 #define TIMER_1_CR_ASPEED_ENABLE	BIT(0)
 #define TIMER_1_CR_ASPEED_CLOCK		BIT(1)
@@ -66,6 +68,18 @@
 #define TIMER_3_CR_ASPEED_CLOCK		BIT(9)
 #define TIMER_3_CR_ASPEED_INT		BIT(10)
 
+/*
+ * Interrupt status/mask register definitions for fttmr010/gemini/moxart
+ * timers.
+ * The registers don't exist and they are not needed on aspeed timers
+ * because:
+ *   - aspeed timer overflow interrupt is controlled by bits in Control
+ *     Register (TMC30).
+ *   - aspeed timers always generate interrupt when either one of the
+ *     Match registers equals to Status register.
+ */
+#define TIMER_INTR_STATE	(0x34)
+#define TIMER_INTR_MASK		(0x38)
 #define TIMER_1_INT_MATCH1	BIT(0)
 #define TIMER_1_INT_MATCH2	BIT(1)
 #define TIMER_1_INT_OVERFLOW	BIT(2)
@@ -80,7 +94,7 @@
 struct fttmr010 {
 	void __iomem *base;
 	unsigned int tick_rate;
-	bool count_down;
+	bool is_aspeed;
 	u32 t1_enable_val;
 	struct clock_event_device clkevt;
 #ifdef CONFIG_ARM
@@ -130,7 +144,7 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	cr &= ~fttmr010->t1_enable_val;
 	writel(cr, fttmr010->base + TIMER_CR);
 
-	if (fttmr010->count_down) {
+	if (fttmr010->is_aspeed) {
 		/*
 		 * ASPEED Timer Controller will load TIMER1_LOAD register
 		 * into TIMER1_COUNT register when the timer is re-enabled.
@@ -175,16 +189,17 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
 
 	/* Setup counter start from 0 or ~0 */
 	writel(0, fttmr010->base + TIMER1_COUNT);
-	if (fttmr010->count_down)
+	if (fttmr010->is_aspeed) {
 		writel(~0, fttmr010->base + TIMER1_LOAD);
-	else
+	} else {
 		writel(0, fttmr010->base + TIMER1_LOAD);
 
-	/* Enable interrupt */
-	cr = readl(fttmr010->base + TIMER_INTR_MASK);
-	cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
-	cr |= TIMER_1_INT_MATCH1;
-	writel(cr, fttmr010->base + TIMER_INTR_MASK);
+		/* Enable interrupt */
+		cr = readl(fttmr010->base + TIMER_INTR_MASK);
+		cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+		cr |= TIMER_1_INT_MATCH1;
+		writel(cr, fttmr010->base + TIMER_INTR_MASK);
+	}
 
 	return 0;
 }
@@ -201,9 +216,8 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 	writel(cr, fttmr010->base + TIMER_CR);
 
 	/* Setup timer to fire at 1/HZ intervals. */
-	if (fttmr010->count_down) {
+	if (fttmr010->is_aspeed) {
 		writel(period, fttmr010->base + TIMER1_LOAD);
-		writel(0, fttmr010->base + TIMER1_MATCH1);
 	} else {
 		cr = 0xffffffff - (period - 1);
 		writel(cr, fttmr010->base + TIMER1_COUNT);
@@ -281,23 +295,21 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	}
 
 	/*
-	 * The Aspeed AST2400 moves bits around in the control register,
-	 * otherwise it works the same.
+	 * The Aspeed timers move bits around in the control register.
 	 */
 	if (is_aspeed) {
 		fttmr010->t1_enable_val = TIMER_1_CR_ASPEED_ENABLE |
 			TIMER_1_CR_ASPEED_INT;
-		/* Downward not available */
-		fttmr010->count_down = true;
+		fttmr010->is_aspeed = true;
 	} else {
 		fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
-	}
 
-	/*
-	 * Reset the interrupt mask and status
-	 */
-	writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
-	writel(0, fttmr010->base + TIMER_INTR_STATE);
+		/*
+		 * Reset the interrupt mask and status
+		 */
+		writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
+		writel(0, fttmr010->base + TIMER_INTR_STATE);
+	}
 
 	/*
 	 * Enable timer 1 count up, timer 2 count up, except on Aspeed,
@@ -306,9 +318,8 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	if (is_aspeed)
 		val = TIMER_2_CR_ASPEED_ENABLE;
 	else {
-		val = TIMER_2_CR_ENABLE;
-		if (!fttmr010->count_down)
-			val |= TIMER_1_CR_UPDOWN | TIMER_2_CR_UPDOWN;
+		val = TIMER_2_CR_ENABLE | TIMER_1_CR_UPDOWN |
+			TIMER_2_CR_UPDOWN;
 	}
 	writel(val, fttmr010->base + TIMER_CR);
 
@@ -321,7 +332,7 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	writel(0, fttmr010->base + TIMER2_MATCH1);
 	writel(0, fttmr010->base + TIMER2_MATCH2);
 
-	if (fttmr010->count_down) {
+	if (fttmr010->is_aspeed) {
 		writel(~0, fttmr010->base + TIMER2_LOAD);
 		clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
 				      "FTTMR010-TIMER2",
@@ -371,7 +382,7 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 
 #ifdef CONFIG_ARM
 	/* Also use this timer for delays */
-	if (fttmr010->count_down)
+	if (fttmr010->is_aspeed)
 		fttmr010->delay_timer.read_current_timer =
 			fttmr010_read_current_timer_down;
 	else
-- 
2.20.1

[PATCH AUTOSEL 4.14 052/127] vxlan: Fix error path in __vxlan_dev_create()

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 6db9246871394b3a136cd52001a0763676563840 ]

When a failure occurs in rtnl_configure_link(), the current code
calls unregister_netdevice() to roll back the earlier call to
register_netdevice(), and jumps to errout, which calls
vxlan_fdb_destroy().

However unregister_netdevice() calls transitively ndo_uninit, which is
vxlan_uninit(), and that already takes care of deleting the default FDB
entry by calling vxlan_fdb_delete_default(). Since the entry added
earlier in __vxlan_dev_create() is exactly the default entry, the
cleanup code in the errout block always leads to double free and thus a
panic.

Besides, since vxlan_fdb_delete_default() always destroys the FDB entry
with notification enabled, the deletion of the default entry is notified
even before the addition was notified.

Instead, move the unregister_netdevice() call after the manual destroy,
which solves both problems.

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 6d26bbd190dd6..153a81ece9fe4 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3217,6 +3217,7 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	struct vxlan_net *vn = net_generic(net, vxlan_net_id);
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	struct vxlan_fdb *f = NULL;
+	bool unregister = false;
 	int err;
 
 	err = vxlan_dev_configure(net, dev, conf, false, extack);
@@ -3242,12 +3243,11 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	err = register_netdevice(dev);
 	if (err)
 		goto errout;
+	unregister = true;
 
 	err = rtnl_configure_link(dev, NULL);
-	if (err) {
-		unregister_netdevice(dev);
+	if (err)
 		goto errout;
-	}
 
 	/* notify default fdb entry */
 	if (f)
@@ -3255,9 +3255,16 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 
 	list_add(&vxlan->next, &vn->vxlan_list);
 	return 0;
+
 errout:
+	/* unregister_netdevice() destroys the default FDB entry with deletion
+	 * notification. But the addition notification was not sent yet, so
+	 * destroy the entry by hand here.
+	 */
 	if (f)
 		vxlan_fdb_destroy(vxlan, f, false);
+	if (unregister)
+		unregister_netdevice(dev);
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 053/127] powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit e93ba1b7eb5b188c749052df7af1c90821c5f320 ]

This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/ppc_mmu_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 2a049fb8523d5..96c52271e9c2d 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -52,7 +52,7 @@ struct batrange {		/* stores address ranges mapped by BATs */
 phys_addr_t v_block_mapped(unsigned long va)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
 			return bat_addrs[b].phys + (va - bat_addrs[b].start);
 	return 0;
@@ -64,7 +64,7 @@ phys_addr_t v_block_mapped(unsigned long va)
 unsigned long p_block_mapped(phys_addr_t pa)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (pa >= bat_addrs[b].phys
 	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
 		              +bat_addrs[b].phys)
-- 
2.20.1

[PATCH AUTOSEL 4.14 054/127] powerpc/xmon: fix dump_segments()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 32c8c4c621897199e690760c2d57054f8b84b6e6 ]

mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 5a739588aa505..51a53fd517229 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -3293,7 +3293,7 @@ void dump_segments(void)
 
 	printf("sr0-15 =");
 	for (i = 0; i < 16; ++i)
-		printf(" %x", mfsrin(i));
+		printf(" %x", mfsrin(i << 28));
 	printf("\n");
 }
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.14 055/127] drivers/regulator: fix a missing check of return value

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]

If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/palmas-regulator.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index bb5ab7d78895b..c2cc392a27d40 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -443,13 +443,16 @@ static int palmas_ldo_write(struct palmas *palmas, unsigned int reg,
 static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode)
 {
 	int id = rdev_get_id(dev);
+	int ret;
 	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
 	struct palmas_pmic_driver_data *ddata = pmic->palmas->pmic_ddata;
 	struct palmas_regs_info *rinfo = &ddata->palmas_regs_info[id];
 	unsigned int reg;
 	bool rail_enable = true;
 
-	palmas_smps_read(pmic->palmas, rinfo->ctrl_addr, &reg);
+	ret = palmas_smps_read(pmic->palmas, rinfo->ctrl_addr, &reg);
+	if (ret)
+		return ret;
 
 	reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 056/127] Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading

[Sasha Levin]

From: Jonathan Bakker <xc-racer2@live.ca>

[ Upstream commit 22bba80500fdf624a7cfbb65fdfa97a038ae224d ]

The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded.  This will cause
logging of errors such as:
	Bluetooth: hci0: Frame reassembly failed (-84)

This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.

Note that this is another variant of commit 01d5e44ace8a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_bcm.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 6d41b2023f09d..61971ddbd2313 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -50,6 +50,12 @@
 #define BCM_LM_DIAG_PKT 0x07
 #define BCM_LM_DIAG_SIZE 63
 
+#define BCM_TYPE49_PKT 0x31
+#define BCM_TYPE49_SIZE 0
+
+#define BCM_TYPE52_PKT 0x34
+#define BCM_TYPE52_SIZE 0
+
 #define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */
 
 /* platform device driver resources */
@@ -483,12 +489,28 @@ static int bcm_setup(struct hci_uart *hu)
 	.lsize = 0, \
 	.maxlen = BCM_NULL_SIZE
 
+#define BCM_RECV_TYPE49 \
+	.type = BCM_TYPE49_PKT, \
+	.hlen = BCM_TYPE49_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE49_SIZE
+
+#define BCM_RECV_TYPE52 \
+	.type = BCM_TYPE52_PKT, \
+	.hlen = BCM_TYPE52_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE52_SIZE
+
 static const struct h4_recv_pkt bcm_recv_pkts[] = {
 	{ H4_RECV_ACL,      .recv = hci_recv_frame },
 	{ H4_RECV_SCO,      .recv = hci_recv_frame },
 	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
 	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
 	{ BCM_RECV_NULL,    .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE49,  .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE52,  .recv = hci_recv_diag  },
 };
 
 static int bcm_recv(struct hci_uart *hu, const void *data, int count)
-- 
2.20.1

[PATCH AUTOSEL 4.14 057/127] serial: max310x: Fix tx_empty() callback

[Sasha Levin]

From: Alexander Shiyan <shc_work@mail.ru>

[ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ]

Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0969a0d97b2be..cec995ec11eab 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -769,12 +769,9 @@ static void max310x_start_tx(struct uart_port *port)
 
 static unsigned int max310x_tx_empty(struct uart_port *port)
 {
-	unsigned int lvl, sts;
+	u8 lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG);
 
-	lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG);
-	sts = max310x_port_read(port, MAX310X_IRQSTS_REG);
-
-	return ((sts & MAX310X_IRQ_TXEMPTY_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+	return lvl ? 0 : TIOCSER_TEMT;
 }
 
 static unsigned int max310x_get_mctrl(struct uart_port *port)
-- 
2.20.1

[PATCH AUTOSEL 4.14 058/127] openrisc: Fix broken paths to arch/or32

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]

OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/kernel/entry.S | 2 +-
 arch/openrisc/kernel/head.S  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index b16e95a4e875f..1107d34e45bf1 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -184,7 +184,7 @@ handler:							;\
  *	 occured. in fact they never do. if you need them use
  *	 values saved on stack (for SPR_EPC, SPR_ESR) or content
  *       of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE()
- *       in 'arch/or32/kernel/head.S'
+ *       in 'arch/openrisc/kernel/head.S'
  */
 
 /* =====================================================[ exceptions] === */
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 90979acdf165b..4d878d13b8606 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -1551,7 +1551,7 @@ _string_nl:
 
 /*
  * .data section should be page aligned
- *	(look into arch/or32/kernel/vmlinux.lds)
+ *	(look into arch/openrisc/kernel/vmlinux.lds.S)
  */
 	.section .data,"aw"
 	.align	8192
-- 
2.20.1

[PATCH AUTOSEL 4.14 059/127] RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layer

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 2ee00f6a98c36f7e4ba07cc33f24cc5a69060cc9 ]

This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 3f5b5893792cd..9f7287f45d06f 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2210,6 +2210,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 
 	if (srp_post_send(ch, iu, len)) {
 		shost_printk(KERN_ERR, target->scsi_host, PFX "Send failed\n");
+		scmnd->result = DID_ERROR << 16;
 		goto err_unmap;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 060/127] scsi: qla2xxx: deadlock by configfs_depend_item

[Sasha Levin]

From: Anatoliy Glagolev <glagolig@gmail.com>

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a82d51
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.

Signed-off-by: Anatoliy Glagolev <glagolig@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 48 +++++-------------------------
 drivers/scsi/qla2xxx/tcm_qla2xxx.h |  3 --
 2 files changed, 8 insertions(+), 43 deletions(-)

diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 2fcdaadd10fa5..e08ac431bc496 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -903,38 +903,14 @@ static ssize_t tcm_qla2xxx_tpg_enable_show(struct config_item *item,
 			atomic_read(&tpg->lport_tpg_enabled));
 }
 
-static void tcm_qla2xxx_depend_tpg(struct work_struct *work)
-{
-	struct tcm_qla2xxx_tpg *base_tpg = container_of(work,
-				struct tcm_qla2xxx_tpg, tpg_base_work);
-	struct se_portal_group *se_tpg = &base_tpg->se_tpg;
-	struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha;
-
-	if (!target_depend_item(&se_tpg->tpg_group.cg_item)) {
-		atomic_set(&base_tpg->lport_tpg_enabled, 1);
-		qlt_enable_vha(base_vha);
-	}
-	complete(&base_tpg->tpg_base_comp);
-}
-
-static void tcm_qla2xxx_undepend_tpg(struct work_struct *work)
-{
-	struct tcm_qla2xxx_tpg *base_tpg = container_of(work,
-				struct tcm_qla2xxx_tpg, tpg_base_work);
-	struct se_portal_group *se_tpg = &base_tpg->se_tpg;
-	struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha;
-
-	if (!qlt_stop_phase1(base_vha->vha_tgt.qla_tgt)) {
-		atomic_set(&base_tpg->lport_tpg_enabled, 0);
-		target_undepend_item(&se_tpg->tpg_group.cg_item);
-	}
-	complete(&base_tpg->tpg_base_comp);
-}
-
 static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
 		const char *page, size_t count)
 {
 	struct se_portal_group *se_tpg = to_tpg(item);
+	struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
+	struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
+			struct tcm_qla2xxx_lport, lport_wwn);
+	struct scsi_qla_host *vha = lport->qla_vha;
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 			struct tcm_qla2xxx_tpg, se_tpg);
 	unsigned long op;
@@ -953,24 +929,16 @@ static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
 		if (atomic_read(&tpg->lport_tpg_enabled))
 			return -EEXIST;
 
-		INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_depend_tpg);
+		atomic_set(&tpg->lport_tpg_enabled, 1);
+		qlt_enable_vha(vha);
 	} else {
 		if (!atomic_read(&tpg->lport_tpg_enabled))
 			return count;
 
-		INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_undepend_tpg);
+		atomic_set(&tpg->lport_tpg_enabled, 0);
+		qlt_stop_phase1(vha->vha_tgt.qla_tgt);
 	}
-	init_completion(&tpg->tpg_base_comp);
-	schedule_work(&tpg->tpg_base_work);
-	wait_for_completion(&tpg->tpg_base_comp);
 
-	if (op) {
-		if (!atomic_read(&tpg->lport_tpg_enabled))
-			return -ENODEV;
-	} else {
-		if (atomic_read(&tpg->lport_tpg_enabled))
-			return -EPERM;
-	}
 	return count;
 }
 
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 7550ba2831c36..147cf6c903666 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -48,9 +48,6 @@ struct tcm_qla2xxx_tpg {
 	struct tcm_qla2xxx_tpg_attrib tpg_attrib;
 	/* Returned by tcm_qla2xxx_make_tpg() */
 	struct se_portal_group se_tpg;
-	/* Items for dealing with configfs_depend_item */
-	struct completion tpg_base_comp;
-	struct work_struct tpg_base_work;
 };
 
 struct tcm_qla2xxx_fc_loopid {
-- 
2.20.1

[PATCH AUTOSEL 4.14 061/127] scsi: csiostor: fix incorrect dma device in case of vport

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
index 28a9c7d706cb0..03c7b1603dbc1 100644
--- a/drivers/scsi/csiostor/csio_init.c
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -649,7 +649,7 @@ csio_shost_init(struct csio_hw *hw, struct device *dev,
 	if (csio_lnode_init(ln, hw, pln))
 		goto err_shost_put;
 
-	if (scsi_add_host(shost, dev))
+	if (scsi_add_host_with_dma(shost, dev, &hw->pdev->dev))
 		goto err_lnode_exit;
 
 	return ln;
-- 
2.20.1

[PATCH AUTOSEL 4.14 062/127] ath6kl: Only use match sets when firmware supports it

[Sasha Levin]

From: Kyle Roeschley <kyle.roeschley@ni.com>

[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]

Commit dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.

Fixes: dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 414b5b596efcd..f790d8021fa17 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -939,7 +939,7 @@ static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 		else
 			ssid_list[i].flag = ANY_SSID_FLAG;
 
-		if (n_match_ssid == 0)
+		if (ar->wiphy->max_match_sets != 0 && n_match_ssid == 0)
 			ssid_list[i].flag |= MATCH_SSID_FLAG;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 063/127] ath6kl: Fix off by one error in scan completion

[Sasha Levin]

From: Kyle Roeschley <kyle.roeschley@ni.com>

[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]

When ath6kl was reworked to share code between regular and scheduled scans
in commit 3b8ffc6a22ba ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.

Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f790d8021fa17..37deb9bae3643 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1093,7 +1093,7 @@ void ath6kl_cfg80211_scan_complete_event(struct ath6kl_vif *vif, bool aborted)
 	if (vif->scan_req->n_ssids && vif->scan_req->ssids[0].ssid_len) {
 		for (i = 0; i < vif->scan_req->n_ssids; i++) {
 			ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx,
-						  i + 1, DISABLE_SSID_FLAG,
+						  i, DISABLE_SSID_FLAG,
 						  0, NULL);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 064/127] powerpc/perf: Fix unit_sel/cache_sel checks

[Sasha Levin]

From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>

[ Upstream commit 2d46d4877b1afd14059393a48bdb8ce27955174c ]

Raw event code has couple of fields "unit" and "cache" in it, to capture
the "unit" to monitor for a given pmcxsel and cache reload qualifier to
program in MMCR1.

isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3)
Event bus control fields with "cache" bits of the raw event code.
These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap
the checks to be power8 specific. Also, "cache" bit field is referred to
update MMCR1[16:17] and this check can be power8 specific.

Fixes: 7ffd948fae4cd ('powerpc/perf: factor out power8 pmu functions')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/isa207-common.c | 25 ++++++++++++++++++-------
 arch/powerpc/perf/isa207-common.h |  4 ++--
 2 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index cf9c35aa0cf45..7ecea7143e587 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -150,6 +150,14 @@ static bool is_thresh_cmp_valid(u64 event)
 	return true;
 }
 
+static unsigned int dc_ic_rld_quad_l1_sel(u64 event)
+{
+	unsigned int cache;
+
+	cache = (event >> EVENT_CACHE_SEL_SHIFT) & MMCR1_DC_IC_QUAL_MASK;
+	return cache;
+}
+
 static inline u64 isa207_find_source(u64 idx, u32 sub_idx)
 {
 	u64 ret = PERF_MEM_NA;
@@ -290,10 +298,10 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 		 * have a cache selector of zero. The bank selector (bit 3) is
 		 * irrelevant, as long as the rest of the value is 0.
 		 */
-		if (cache & 0x7)
+		if (!cpu_has_feature(CPU_FTR_ARCH_300) && (cache & 0x7))
 			return -1;
 
-	} else if (event & EVENT_IS_L1) {
+	} else if (cpu_has_feature(CPU_FTR_ARCH_300) || (event & EVENT_IS_L1)) {
 		mask  |= CNST_L1_QUAL_MASK;
 		value |= CNST_L1_QUAL_VAL(cache);
 	}
@@ -396,11 +404,14 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
 		/* In continuous sampling mode, update SDAR on TLB miss */
 		mmcra_sdar_mode(event[i], &mmcra);
 
-		if (event[i] & EVENT_IS_L1) {
-			cache = event[i] >> EVENT_CACHE_SEL_SHIFT;
-			mmcr1 |= (cache & 1) << MMCR1_IC_QUAL_SHIFT;
-			cache >>= 1;
-			mmcr1 |= (cache & 1) << MMCR1_DC_QUAL_SHIFT;
+		if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+			cache = dc_ic_rld_quad_l1_sel(event[i]);
+			mmcr1 |= (cache) << MMCR1_DC_IC_QUAL_SHIFT;
+		} else {
+			if (event[i] & EVENT_IS_L1) {
+				cache = dc_ic_rld_quad_l1_sel(event[i]);
+				mmcr1 |= (cache) << MMCR1_DC_IC_QUAL_SHIFT;
+			}
 		}
 
 		if (is_event_marked(event[i])) {
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index 6c737d675792e..493e5cc5fa8a6 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -232,8 +232,8 @@
 #define MMCR1_COMBINE_SHIFT(pmc)	(35 - ((pmc) - 1))
 #define MMCR1_PMCSEL_SHIFT(pmc)		(24 - (((pmc) - 1)) * 8)
 #define MMCR1_FAB_SHIFT			36
-#define MMCR1_DC_QUAL_SHIFT		47
-#define MMCR1_IC_QUAL_SHIFT		46
+#define MMCR1_DC_IC_QUAL_MASK		0x3
+#define MMCR1_DC_IC_QUAL_SHIFT		46
 
 /* MMCR1 Combine bits macro for power9 */
 #define p9_MMCR1_COMBINE_SHIFT(pmc)	(38 - ((pmc - 1) * 2))
-- 
2.20.1

[PATCH AUTOSEL 4.14 065/127] powerpc/prom: fix early DEBUG messages

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f830562974417..d96b284150904 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -128,7 +128,7 @@ static void __init move_device_tree(void)
 		p = __va(memblock_alloc(size, PAGE_SIZE));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = p;
-		DBG("Moved device tree to 0x%p\n", p);
+		DBG("Moved device tree to 0x%px\n", p);
 	}
 
 	DBG("<- move_device_tree\n");
@@ -662,7 +662,7 @@ void __init early_init_devtree(void *params)
 {
 	phys_addr_t limit;
 
-	DBG(" -> early_init_devtree(%p)\n", params);
+	DBG(" -> early_init_devtree(%px)\n", params);
 
 	/* Too early to BUG_ON(), do it by hand */
 	if (!early_init_dt_verify(params))
@@ -722,7 +722,7 @@ void __init early_init_devtree(void *params)
 	memblock_allow_resize();
 	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
+	DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
-- 
2.20.1

[PATCH AUTOSEL 4.14 066/127] powerpc/mm: Make NULL pointer deferences explicit on bad page faults.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/fault.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 52863deed65df..5fc8a010fdf07 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -581,21 +581,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 	switch (regs->trap) {
 	case 0x300:
 	case 0x380:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"data at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: %s at 0x%08lx\n",
+			 regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
+			 "Unable to handle kernel data access", regs->dar);
 		break;
 	case 0x400:
 	case 0x480:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"instruction fetch\n");
+		pr_alert("BUG: Unable to handle kernel instruction fetch%s",
+			 regs->nip < PAGE_SIZE ? " (NULL pointer?)\n" : "\n");
 		break;
 	case 0x600:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unaligned access at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: Unable to handle kernel unaligned access at 0x%08lx\n",
+			 regs->dar);
 		break;
 	default:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unknown fault\n");
+		pr_alert("BUG: Unable to handle unknown paging fault at 0x%08lx\n",
+			 regs->dar);
 		break;
 	}
 	printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
-- 
2.20.1

[PATCH AUTOSEL 4.14 067/127] powerpc/44x/bamboo: Fix PCI range

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/bamboo.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index aa68911f6560a..084b82ba74933 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -268,8 +268,10 @@
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
+			 * The chip also supports a larger memory range but
+			 * it's not naturally aligned, so our code will break
 			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
 				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 068/127] vfio/spapr_tce: Get rid of possible infinite loop

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit 517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]

As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.

This makes the loop finite and prints a warning on every failure to make
the code more bug prone.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_spapr_tce.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
index b4c68f3b82be9..eba9aaf3cc17c 100644
--- a/drivers/vfio/vfio_iommu_spapr_tce.c
+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
@@ -409,6 +409,7 @@ static void tce_iommu_release(void *iommu_data)
 {
 	struct tce_container *container = iommu_data;
 	struct tce_iommu_group *tcegrp;
+	struct tce_iommu_prereg *tcemem, *tmtmp;
 	long i;
 
 	while (tce_groups_attached(container)) {
@@ -431,13 +432,8 @@ static void tce_iommu_release(void *iommu_data)
 		tce_iommu_free_table(container, tbl);
 	}
 
-	while (!list_empty(&container->prereg_list)) {
-		struct tce_iommu_prereg *tcemem;
-
-		tcemem = list_first_entry(&container->prereg_list,
-				struct tce_iommu_prereg, next);
-		WARN_ON_ONCE(tce_iommu_prereg_free(container, tcemem));
-	}
+	list_for_each_entry_safe(tcemem, tmtmp, &container->prereg_list, next)
+		WARN_ON(tce_iommu_prereg_free(container, tcemem));
 
 	tce_iommu_disable(container);
 	if (container->mm)
-- 
2.20.1

[PATCH AUTOSEL 4.14 069/127] powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]

The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.

This initializes pcierr and fstate to zero in all call sites.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 8 ++++----
 arch/powerpc/platforms/powernv/pci-ioda.c    | 4 ++--
 arch/powerpc/platforms/powernv/pci.c         | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 8864065eba227..fa2965c96155b 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -548,8 +548,8 @@ static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
 static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
 	s64 rc;
 	int result = 0;
 
@@ -587,8 +587,8 @@ static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
 static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
 	s64 rc;
 	int result;
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index ddef22e00ddd7..d3d5796f7df60 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -598,8 +598,8 @@ static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt)
 static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no)
 {
 	struct pnv_ioda_pe *slave, *pe;
-	u8 fstate, state;
-	__be16 pcierr;
+	u8 fstate = 0, state;
+	__be16 pcierr = 0;
 	s64 rc;
 
 	/* Sanity check on PE number */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 5422f4a6317ca..e2d031a3ec157 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -600,8 +600,8 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
 static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 {
 	struct pnv_phb *phb = pdn->phb->private_data;
-	u8	fstate;
-	__be16	pcierr;
+	u8	fstate = 0;
+	__be16	pcierr = 0;
 	unsigned int pe_no;
 	s64	rc;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 070/127] drbd: ignore "all zero" peer volume sizes in handshake

[Sasha Levin]

From: Lars Ellenberg <lars.ellenberg@linbit.com>

[ Upstream commit 94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
 - I don't have a current size myself
 - we agree on the size anyways
 - I do have a current size, am Secondary, and he has the only disk
 - I do have a current size, am Primary, and he has the only disk,
   which is larger than my current size

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_receiver.c | 33 +++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 8fbdfaacc2226..08586bc5219bf 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3977,6 +3977,7 @@ static int receive_sizes(struct drbd_connection *connection, struct packet_info
 	struct o_qlim *o = (connection->agreed_features & DRBD_FF_WSAME) ? p->qlim : NULL;
 	enum determine_dev_size dd = DS_UNCHANGED;
 	sector_t p_size, p_usize, p_csize, my_usize;
+	sector_t new_size, cur_size;
 	int ldsc = 0; /* local disk size changed */
 	enum dds_flags ddsf;
 
@@ -3984,6 +3985,7 @@ static int receive_sizes(struct drbd_connection *connection, struct packet_info
 	if (!peer_device)
 		return config_unknown_volume(connection, pi);
 	device = peer_device->device;
+	cur_size = drbd_get_capacity(device->this_bdev);
 
 	p_size = be64_to_cpu(p->d_size);
 	p_usize = be64_to_cpu(p->u_size);
@@ -3994,7 +3996,6 @@ static int receive_sizes(struct drbd_connection *connection, struct packet_info
 	device->p_size = p_size;
 
 	if (get_ldev(device)) {
-		sector_t new_size, cur_size;
 		rcu_read_lock();
 		my_usize = rcu_dereference(device->ldev->disk_conf)->disk_size;
 		rcu_read_unlock();
@@ -4012,7 +4013,6 @@ static int receive_sizes(struct drbd_connection *connection, struct packet_info
 		/* Never shrink a device with usable data during connect.
 		   But allow online shrinking if we are connected. */
 		new_size = drbd_new_dev_size(device, device->ldev, p_usize, 0);
-		cur_size = drbd_get_capacity(device->this_bdev);
 		if (new_size < cur_size &&
 		    device->state.disk >= D_OUTDATED &&
 		    device->state.conn < C_CONNECTED) {
@@ -4077,9 +4077,36 @@ static int receive_sizes(struct drbd_connection *connection, struct packet_info
 		 *
 		 * However, if he sends a zero current size,
 		 * take his (user-capped or) backing disk size anyways.
+		 *
+		 * Unless of course he does not have a disk himself.
+		 * In which case we ignore this completely.
 		 */
+		sector_t new_size = p_csize ?: p_usize ?: p_size;
 		drbd_reconsider_queue_parameters(device, NULL, o);
-		drbd_set_my_capacity(device, p_csize ?: p_usize ?: p_size);
+		if (new_size == 0) {
+			/* Ignore, peer does not know nothing. */
+		} else if (new_size == cur_size) {
+			/* nothing to do */
+		} else if (cur_size != 0 && p_size == 0) {
+			drbd_warn(device, "Ignored diskless peer device size (peer:%llu != me:%llu sectors)!\n",
+					(unsigned long long)new_size, (unsigned long long)cur_size);
+		} else if (new_size < cur_size && device->state.role == R_PRIMARY) {
+			drbd_err(device, "The peer's device size is too small! (%llu < %llu sectors); demote me first!\n",
+					(unsigned long long)new_size, (unsigned long long)cur_size);
+			conn_request_state(peer_device->connection, NS(conn, C_DISCONNECTING), CS_HARD);
+			return -EIO;
+		} else {
+			/* I believe the peer, if
+			 *  - I don't have a current size myself
+			 *  - we agree on the size anyways
+			 *  - I do have a current size, am Secondary,
+			 *    and he has the only disk
+			 *  - I do have a current size, am Primary,
+			 *    and he has the only disk,
+			 *    which is larger than my current size
+			 */
+			drbd_set_my_capacity(device, new_size);
+		}
 	}
 
 	if (get_ldev(device)) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 071/127] drbd: reject attach of unsuitable uuids even if connected

[Sasha Levin]

From: Lars Ellenberg <lars.ellenberg@linbit.com>

[ Upstream commit fe43ed97bba3b11521abd934b83ed93143470e4f ]

Multiple failure scenario:
a) all good
   Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
   Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
   changes only make it to the Secondary storage.
d) lose disk on Secondary,
   Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_nl.c       |  6 +++---
 drivers/block/drbd/drbd_receiver.c | 19 +++++++++++++++++++
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index ad13ec66c8e4d..a675a0f61f9c0 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1935,9 +1935,9 @@ int drbd_adm_attach(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
-	if (device->state.conn < C_CONNECTED &&
-	    device->state.role == R_PRIMARY && device->ed_uuid &&
-	    (device->ed_uuid & ~((u64)1)) != (nbc->md.uuid[UI_CURRENT] & ~((u64)1))) {
+	if (device->state.pdsk != D_UP_TO_DATE && device->ed_uuid &&
+	    (device->state.role == R_PRIMARY || device->state.peer == R_PRIMARY) &&
+            (device->ed_uuid & ~((u64)1)) != (nbc->md.uuid[UI_CURRENT] & ~((u64)1))) {
 		drbd_err(device, "Can only attach to data with current UUID=%016llX\n",
 		    (unsigned long long)device->ed_uuid);
 		retcode = ERR_DATA_NOT_CURRENT;
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 08586bc5219bf..a7c180426c601 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -4392,6 +4392,25 @@ static int receive_state(struct drbd_connection *connection, struct packet_info
 	if (peer_state.conn == C_AHEAD)
 		ns.conn = C_BEHIND;
 
+	/* TODO:
+	 * if (primary and diskless and peer uuid != effective uuid)
+	 *     abort attach on peer;
+	 *
+	 * If this node does not have good data, was already connected, but
+	 * the peer did a late attach only now, trying to "negotiate" with me,
+	 * AND I am currently Primary, possibly frozen, with some specific
+	 * "effective" uuid, this should never be reached, really, because
+	 * we first send the uuids, then the current state.
+	 *
+	 * In this scenario, we already dropped the connection hard
+	 * when we received the unsuitable uuids (receive_uuids().
+	 *
+	 * Should we want to change this, that is: not drop the connection in
+	 * receive_uuids() already, then we would need to add a branch here
+	 * that aborts the attach of "unsuitable uuids" on the peer in case
+	 * this node is currently Diskless Primary.
+	 */
+
 	if (device->p_uuid && peer_state.disk >= D_NEGOTIATING &&
 	    get_ldev_if_state(device, D_NEGOTIATING)) {
 		int cr; /* consider resync */
-- 
2.20.1

[PATCH AUTOSEL 4.14 072/127] drbd: do not block when adjusting "disk-options" while IO is frozen

[Sasha Levin]

From: Lars Ellenberg <lars.ellenberg@linbit.com>

[ Upstream commit f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]

"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.

When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.

If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).

Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_nl.c | 37 ++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)

diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index a675a0f61f9c0..31d7fe4480afd 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1515,6 +1515,30 @@ static void sanitize_disk_conf(struct drbd_device *device, struct disk_conf *dis
 	}
 }
 
+static int disk_opts_check_al_size(struct drbd_device *device, struct disk_conf *dc)
+{
+	int err = -EBUSY;
+
+	if (device->act_log &&
+	    device->act_log->nr_elements == dc->al_extents)
+		return 0;
+
+	drbd_suspend_io(device);
+	/* If IO completion is currently blocked, we would likely wait
+	 * "forever" for the activity log to become unused. So we don't. */
+	if (atomic_read(&device->ap_bio_cnt))
+		goto out;
+
+	wait_event(device->al_wait, lc_try_lock(device->act_log));
+	drbd_al_shrink(device);
+	err = drbd_check_al_size(device, dc);
+	lc_unlock(device->act_log);
+	wake_up(&device->al_wait);
+out:
+	drbd_resume_io(device);
+	return err;
+}
+
 int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
 {
 	struct drbd_config_context adm_ctx;
@@ -1577,15 +1601,12 @@ int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
-	drbd_suspend_io(device);
-	wait_event(device->al_wait, lc_try_lock(device->act_log));
-	drbd_al_shrink(device);
-	err = drbd_check_al_size(device, new_disk_conf);
-	lc_unlock(device->act_log);
-	wake_up(&device->al_wait);
-	drbd_resume_io(device);
-
+	err = disk_opts_check_al_size(device, new_disk_conf);
 	if (err) {
+		/* Could be just "busy". Ignore?
+		 * Introduce dedicated error code? */
+		drbd_msg_put_info(adm_ctx.reply_skb,
+			"Try again without changing current al-extents setting");
 		retcode = ERR_NOMEM;
 		goto fail_unlock;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 073/127] drbd: fix print_st_err()'s prototype to match the definition

[Sasha Levin]

From: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>

[ Upstream commit 2c38f035117331eb78d0504843c79ea7c7fabf37 ]

print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.

Fix this by using 'enum drbd_state_rv' in the prototype too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_state.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/drbd/drbd_state.h b/drivers/block/drbd/drbd_state.h
index ea58301d0895c..b2a390ba73a05 100644
--- a/drivers/block/drbd/drbd_state.h
+++ b/drivers/block/drbd/drbd_state.h
@@ -131,7 +131,7 @@ extern enum drbd_state_rv _drbd_set_state(struct drbd_device *, union drbd_state
 					  enum chg_state_flags,
 					  struct completion *done);
 extern void print_st_err(struct drbd_device *, union drbd_state,
-			union drbd_state, int);
+			union drbd_state, enum drbd_state_rv);
 
 enum drbd_state_rv
 _conn_request_state(struct drbd_connection *connection, union drbd_state mask, union drbd_state val,
-- 
2.20.1

[PATCH AUTOSEL 4.14 074/127] IB/rxe: Make counters thread safe

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit d5108e69fe013ff47ab815b849caba9cc33ca1e5 ]

Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.

Fixes: 0b1e5b99a48b ("IB/rxe: Add port protocol stats")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_hw_counters.c | 2 +-
 drivers/infiniband/sw/rxe/rxe_verbs.h       | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_hw_counters.c b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
index 6aeb7a165e469..ea4542a9d69e6 100644
--- a/drivers/infiniband/sw/rxe/rxe_hw_counters.c
+++ b/drivers/infiniband/sw/rxe/rxe_hw_counters.c
@@ -59,7 +59,7 @@ int rxe_ib_get_hw_stats(struct ib_device *ibdev,
 		return -EINVAL;
 
 	for (cnt = 0; cnt  < ARRAY_SIZE(rxe_counter_name); cnt++)
-		stats->value[cnt] = dev->stats_counters[cnt];
+		stats->value[cnt] = atomic64_read(&dev->stats_counters[cnt]);
 
 	return ARRAY_SIZE(rxe_counter_name);
 }
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index b2b76a316ebae..d1cc89f6f2e33 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -410,16 +410,16 @@ struct rxe_dev {
 	spinlock_t		mmap_offset_lock; /* guard mmap_offset */
 	int			mmap_offset;
 
-	u64			stats_counters[RXE_NUM_OF_COUNTERS];
+	atomic64_t		stats_counters[RXE_NUM_OF_COUNTERS];
 
 	struct rxe_port		port;
 	struct list_head	list;
 	struct crypto_shash	*tfm;
 };
 
-static inline void rxe_counter_inc(struct rxe_dev *rxe, enum rxe_counters cnt)
+static inline void rxe_counter_inc(struct rxe_dev *rxe, enum rxe_counters index)
 {
-	rxe->stats_counters[cnt]++;
+	atomic64_inc(&rxe->stats_counters[index]);
 }
 
 static inline struct rxe_dev *to_rdev(struct ib_device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.14 075/127] regulator: tps65910: fix a missing check of return value

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/tps65910-regulator.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 81672a58fcc23..194fa0cbbc048 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1102,8 +1102,10 @@ static int tps65910_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pmic);
 
 	/* Give control of all register to control port */
-	tps65910_reg_set_bits(pmic->mfd, TPS65910_DEVCTRL,
+	err = tps65910_reg_set_bits(pmic->mfd, TPS65910_DEVCTRL,
 				DEVCTRL_SR_CTL_I2C_SEL_MASK);
+	if (err < 0)
+		return err;
 
 	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
-- 
2.20.1

[PATCH AUTOSEL 4.14 076/127] powerpc/83xx: handle machine check caused by watchdog timer

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]

When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.

This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/cputable.h |  1 +
 arch/powerpc/include/asm/reg.h      |  2 ++
 arch/powerpc/kernel/cputable.c      | 10 ++++++----
 arch/powerpc/platforms/83xx/misc.c  | 17 +++++++++++++++++
 4 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 7e3ccf21830e6..e4451b30d7e32 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -45,6 +45,7 @@ extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
 extern int machine_check_47x(struct pt_regs *regs);
 int machine_check_8xx(struct pt_regs *regs);
+int machine_check_83xx(struct pt_regs *regs);
 
 extern void cpu_down_flush_e500v2(void);
 extern void cpu_down_flush_e500mc(void);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index b779f3ccd4126..05f3c2b3aa0ec 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -733,6 +733,8 @@
 #define   SRR1_PROGTRAP		0x00020000 /* Trap */
 #define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
 
+#define   SRR1_MCE_MCP		0x00080000 /* Machine check signal caused interrupt */
+
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
 #define   HSRR1_DENORM		0x00100000 /* Denorm exception */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 760872916013d..da4b0e3792380 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1185,6 +1185,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc603",
 	},
+#ifdef CONFIG_PPC_83xx
 	{	/* e300c1 (a 603e core, plus some) on 83xx */
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00830000,
@@ -1195,7 +1196,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.platform		= "ppc603",
 	},
 	{	/* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
@@ -1209,7 +1210,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.platform		= "ppc603",
 	},
 	{	/* e300c3 (e300c1, plus one IU, half cache size) on 83xx */
@@ -1223,7 +1224,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
@@ -1240,12 +1241,13 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
+#endif
 	{	/* default match, we assume split I/D cache & TB (non-601)... */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index d75c9816a5c92..2b6589fe812dd 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -14,6 +14,7 @@
 #include <linux/of_platform.h>
 #include <linux/pci.h>
 
+#include <asm/debug.h>
 #include <asm/io.h>
 #include <asm/hw_irq.h>
 #include <asm/ipic.h>
@@ -150,3 +151,19 @@ void __init mpc83xx_setup_arch(void)
 
 	mpc83xx_setup_pci();
 }
+
+int machine_check_83xx(struct pt_regs *regs)
+{
+	u32 mask = 1 << (31 - IPIC_MCP_WDT);
+
+	if (!(regs->msr & SRR1_MCE_MCP) || !(ipic_get_mcp_status() & mask))
+		return machine_check_generic(regs);
+	ipic_clear_mcp_status(mask);
+
+	if (debugger_fault_handler(regs))
+		return 1;
+
+	die("Watchdog NMI Reset", regs, 0);
+
+	return 1;
+}
-- 
2.20.1

[PATCH AUTOSEL 4.14 077/127] powerpc/pseries: Fix node leak in update_lmb_associativity_index()

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 47918bc68b7427e961035949cc1501a864578a69 ]

In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/hotplug-memory.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 93e09f108ca17..b40798c878259 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -295,6 +295,7 @@ static u32 lookup_lmb_associativity_index(struct of_drconf_cell *lmb)
 
 	aa_index = find_aa_index(dr_node, ala_prop, lmb_assoc);
 
+	of_node_put(dr_node);
 	dlpar_free_cc_nodes(lmb_node);
 	return aa_index;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 078/127] crypto: mxc-scc - fix build warnings on ARM64

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 2326828ee40357b3d2b1359b8ca7526af201495b ]

The following build warnings are seen when building for ARM64 allmodconfig:

drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Fix them by using the %zu specifier to print a size_t variable and using
a plain %x to print the result of a readl().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxc-scc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/mxc-scc.c b/drivers/crypto/mxc-scc.c
index e01c46387df8d..519086730791b 100644
--- a/drivers/crypto/mxc-scc.c
+++ b/drivers/crypto/mxc-scc.c
@@ -178,12 +178,12 @@ static int mxc_scc_get_data(struct mxc_scc_ctx *ctx,
 	else
 		from = scc->black_memory;
 
-	dev_dbg(scc->dev, "pcopy: from 0x%p %d bytes\n", from,
+	dev_dbg(scc->dev, "pcopy: from 0x%p %zu bytes\n", from,
 		ctx->dst_nents * 8);
 	len = sg_pcopy_from_buffer(ablkreq->dst, ctx->dst_nents,
 				   from, ctx->size, ctx->offset);
 	if (!len) {
-		dev_err(scc->dev, "pcopy err from 0x%p (len=%d)\n", from, len);
+		dev_err(scc->dev, "pcopy err from 0x%p (len=%zu)\n", from, len);
 		return -EINVAL;
 	}
 
@@ -274,7 +274,7 @@ static int mxc_scc_put_data(struct mxc_scc_ctx *ctx,
 	len = sg_pcopy_to_buffer(req->src, ctx->src_nents,
 				 to, len, ctx->offset);
 	if (!len) {
-		dev_err(scc->dev, "pcopy err to 0x%p (len=%d)\n", to, len);
+		dev_err(scc->dev, "pcopy err to 0x%p (len=%zu)\n", to, len);
 		return -EINVAL;
 	}
 
@@ -335,9 +335,9 @@ static void mxc_scc_ablkcipher_next(struct mxc_scc_ctx *ctx,
 		return;
 	}
 
-	dev_dbg(scc->dev, "Start encryption (0x%p/0x%p)\n",
-		(void *)readl(scc->base + SCC_SCM_RED_START),
-		(void *)readl(scc->base + SCC_SCM_BLACK_START));
+	dev_dbg(scc->dev, "Start encryption (0x%x/0x%x)\n",
+		readl(scc->base + SCC_SCM_RED_START),
+		readl(scc->base + SCC_SCM_BLACK_START));
 
 	/* clear interrupt control registers */
 	writel(SCC_SCM_INTR_CTRL_CLR_INTR,
-- 
2.20.1

[PATCH AUTOSEL 4.14 079/127] MIPS: BCM63XX: fix switch core reset on BCM6368

[Sasha Levin]

From: Jonas Gorski <jonas.gorski@gmail.com>

[ Upstream commit 8a38dacf87180738d42b058334c951eba15d2d47 ]

The Ethernet Switch core mask was set to 0, causing the switch core to
be not reset on BCM6368 on boot. Provide the proper mask so the switch
core gets reset to a known good state.

Fixes: 799faa626c71 ("MIPS: BCM63XX: add core reset helper")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm63xx/reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/bcm63xx/reset.c b/arch/mips/bcm63xx/reset.c
index a2af38cf28a70..64574e74cb236 100644
--- a/arch/mips/bcm63xx/reset.c
+++ b/arch/mips/bcm63xx/reset.c
@@ -120,7 +120,7 @@
 #define BCM6368_RESET_DSL	0
 #define BCM6368_RESET_SAR	SOFTRESET_6368_SAR_MASK
 #define BCM6368_RESET_EPHY	SOFTRESET_6368_EPHY_MASK
-#define BCM6368_RESET_ENETSW	0
+#define BCM6368_RESET_ENETSW	SOFTRESET_6368_ENETSW_MASK
 #define BCM6368_RESET_PCM	SOFTRESET_6368_PCM_MASK
 #define BCM6368_RESET_MPI	SOFTRESET_6368_MPI_MASK
 #define BCM6368_RESET_PCIE	0
-- 
2.20.1

[PATCH AUTOSEL 4.14 080/127] pwm: clps711x: Fix period calculation

[Sasha Levin]

From: Alexander Shiyan <shc_work@mail.ru>

[ Upstream commit b0f17570b8203c22f139459c86cfbaa0311313ed ]

Commit e39c0df1be5a ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-clps711x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
index 26ec24e457b12..7e16b7def0dcb 100644
--- a/drivers/pwm/pwm-clps711x.c
+++ b/drivers/pwm/pwm-clps711x.c
@@ -48,7 +48,7 @@ static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v)
 static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v)
 {
 	/* Duty cycle 0..15 max */
-	return DIV_ROUND_CLOSEST(v * 0xf, pwm_get_period(pwm));
+	return DIV_ROUND_CLOSEST(v * 0xf, pwm->args.period);
 }
 
 static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -71,7 +71,7 @@ static int clps711x_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct clps711x_chip *priv = to_clps711x_chip(chip);
 	unsigned int duty;
 
-	if (period_ns != pwm_get_period(pwm))
+	if (period_ns != pwm->args.period)
 		return -EINVAL;
 
 	duty = clps711x_get_duty(pwm, duty_ns);
-- 
2.20.1

[PATCH AUTOSEL 4.14 081/127] net/netlink_compat: Fix a missing check of nla_parse_nested

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 89dfd0083751d00d5d7ead36f6d8b045bf89c5e1 ]

In tipc_nl_compat_sk_dump(), if nla_parse_nested() fails, it could return
an error. To be consistent with other invocations of the function call,
on error, the fix passes the return value upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/netlink_compat.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index ad4dcc663c6de..1c8ac0c11008c 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -1021,8 +1021,11 @@ static int tipc_nl_compat_sk_dump(struct tipc_nl_compat_msg *msg,
 		u32 node;
 		struct nlattr *con[TIPC_NLA_CON_MAX + 1];
 
-		nla_parse_nested(con, TIPC_NLA_CON_MAX,
-				 sock[TIPC_NLA_SOCK_CON], NULL, NULL);
+		err = nla_parse_nested(con, TIPC_NLA_CON_MAX,
+				       sock[TIPC_NLA_SOCK_CON], NULL, NULL);
+
+		if (err)
+			return err;
 
 		node = nla_get_u32(con[TIPC_NLA_CON_NODE]);
 		tipc_tlv_sprintf(msg->rep, "  connected to <%u.%u.%u:%u>",
-- 
2.20.1

[PATCH AUTOSEL 4.14 082/127] net/net_namespace: Check the return value of register_pernet_subsys()

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 0eb987c874dc93f9c9d85a6465dbde20fdd3884c ]

In net_ns_init(), register_pernet_subsys() could fail while registering
network namespace subsystems. The fix checks the return value and
sends a panic() on failure.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net_namespace.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 60b88718b1d48..1af25d53f63ca 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -854,7 +854,8 @@ static int __init net_ns_init(void)
 
 	mutex_unlock(&net_mutex);
 
-	register_pernet_subsys(&net_ns_ops);
+	if (register_pernet_subsys(&net_ns_ops))
+		panic("Could not register network namespace subsystems");
 
 	rtnl_register(PF_UNSPEC, RTM_NEWNSID, rtnl_net_newid, NULL,
 		      RTNL_FLAG_DOIT_UNLOCKED);
-- 
2.20.1

[PATCH AUTOSEL 4.14 083/127] f2fs: fix to dirty inode synchronously

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit b32e019049e959ee10ec359893c9dd5d057dad55 ]

If user change inode's i_flags via ioctl, let's add it into global
dirty list, so that checkpoint can guarantee its persistence before
fsync, it can make checkpoint keeping strong consistency.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 1b17921994459..d68b0132718a6 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1593,7 +1593,7 @@ static int __f2fs_ioc_setflags(struct inode *inode, unsigned int flags)
 
 	inode->i_ctime = current_time(inode);
 	f2fs_set_inode_flags(inode);
-	f2fs_mark_inode_dirty_sync(inode, false);
+	f2fs_mark_inode_dirty_sync(inode, true);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 084/127] um: Make GCOV depend on !KCOV

[Sasha Levin]

From: Richard Weinberger <richard@nod.at>

[ Upstream commit 550ed0e2036663b35cec12374b835444f9c60454 ]

Both do more or less the same thing and are mutually exclusive.
If both are enabled the build will fail.
Sooner or later we can kill UML's GCOV.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/Kconfig.debug | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug
index 967d3109689ff..39d44bfb241d5 100644
--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -19,6 +19,7 @@ config GPROF
 config GCOV
 	bool "Enable gcov support"
 	depends on DEBUG_INFO
+	depends on !KCOV
 	help
 	  This option allows developers to retrieve coverage data from a UML
 	  session.
-- 
2.20.1

[PATCH AUTOSEL 4.14 085/127] net: (cpts) fix a missing check of clk_prepare

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 2d822f2dbab7f4c820f72eb8570aacf3f35855bd ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpts.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index e7b76f6b4f67e..7d1281d812480 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -567,7 +567,9 @@ struct cpts *cpts_create(struct device *dev, void __iomem *regs,
 		return ERR_PTR(PTR_ERR(cpts->refclk));
 	}
 
-	clk_prepare(cpts->refclk);
+	ret = clk_prepare(cpts->refclk);
+	if (ret)
+		return ERR_PTR(ret);
 
 	cpts->cc.read = cpts_systim_read;
 	cpts->cc.mask = CLOCKSOURCE_MASK(32);
-- 
2.20.1

[PATCH AUTOSEL 4.14 086/127] net: stmicro: fix a missing check of clk_prepare

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit f86a3b83833e7cfe558ca4d70b64ebc48903efec ]

clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
index d07520fb969e6..62ccbd47c1db2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -59,7 +59,9 @@ static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		clk_prepare(gmac->tx_clk);
+		ret = clk_prepare(gmac->tx_clk);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 087/127] net: dsa: bcm_sf2: Propagate error value from mdio_write

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit e49505f7255be8ced695919c08a29bf2c3d79616 ]

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 604c5abc08eb8..c6e154698c741 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -432,11 +432,10 @@ static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
 	 * send them to our master MDIO bus controller
 	 */
 	if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
-		bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
+		return bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
 	else
-		mdiobus_write_nested(priv->master_mii_bus, addr, regnum, val);
-
-	return 0;
+		return mdiobus_write_nested(priv->master_mii_bus, addr,
+				regnum, val);
 }
 
 static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
-- 
2.20.1

[PATCH AUTOSEL 4.14 088/127] atl1e: checking the status of atl1e_write_phy_reg

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit ff07d48d7bc0974d4f96a85a4df14564fb09f1ef ]

atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 4f7e195af0bc6..0d08039981b54 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -472,7 +472,9 @@ static void atl1e_mdio_write(struct net_device *netdev, int phy_id,
 {
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 
-	atl1e_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val);
+	if (atl1e_write_phy_reg(&adapter->hw,
+				reg_num & MDIO_REG_ADDR_MASK, val))
+		netdev_err(netdev, "write phy register failed\n");
 }
 
 static int atl1e_mii_ioctl(struct net_device *netdev,
-- 
2.20.1

[PATCH AUTOSEL 4.14 089/127] tipc: fix a missing check of genlmsg_put

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 46273cf7e009231d2b6bc10a926e82b8928a9fb2 ]

genlmsg_put could fail. The fix inserts a check of its return value, and
if it fails, returns -EMSGSIZE.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/netlink_compat.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 1c8ac0c11008c..91d51a595ac23 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -974,6 +974,8 @@ static int tipc_nl_compat_publ_dump(struct tipc_nl_compat_msg *msg, u32 sock)
 
 	hdr = genlmsg_put(args, 0, 0, &tipc_genl_family, NLM_F_MULTI,
 			  TIPC_NL_PUBL_GET);
+	if (!hdr)
+		return -EMSGSIZE;
 
 	nest = nla_nest_start(args, TIPC_NLA_SOCK);
 	if (!nest) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 090/127] net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]

This patch fixes potential double frees if register_hdlc_device() fails.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 18b648648adb2..289dff262948d 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -1114,7 +1114,6 @@ static int ucc_hdlc_probe(struct platform_device *pdev)
 	if (register_hdlc_device(dev)) {
 		ret = -ENOBUFS;
 		pr_err("ucc_hdlc: unable to register hdlc device\n");
-		free_netdev(dev);
 		goto free_dev;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 091/127] ocfs2: clear journal dirty flag after shutdown journal

[Sasha Levin]

From: Junxiao Bi <junxiao.bi@oracle.com>

[ Upstream commit d85400af790dba2aa294f0a77e712f166681f977 ]

Dirty flag of the journal should be cleared at the last stage of umount,
if do it before jbd2_journal_destroy(), then some metadata in uncommitted
transaction could be lost due to io error, but as dirty flag of journal
was already cleared, we can't find that until run a full fsck.  This may
cause system panic or other corruption.

Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/journal.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index f7fba58618ef3..2459ae9d2234f 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1018,7 +1018,8 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb)
 			mlog_errno(status);
 	}
 
-	if (status == 0) {
+	/* Shutdown the kernel journal system */
+	if (!jbd2_journal_destroy(journal->j_journal) && !status) {
 		/*
 		 * Do not toggle if flush was unsuccessful otherwise
 		 * will leave dirty metadata in a "clean" journal
@@ -1027,9 +1028,6 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb)
 		if (status < 0)
 			mlog_errno(status);
 	}
-
-	/* Shutdown the kernel journal system */
-	jbd2_journal_destroy(journal->j_journal);
 	journal->j_journal = NULL;
 
 	OCFS2_I(inode)->ip_open_count--;
-- 
2.20.1

[PATCH AUTOSEL 4.14 092/127] vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n

[Sasha Levin]

From: Wei Yang <richard.weiyang@gmail.com>

[ Upstream commit 8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 ]

Commit fa5e084e43eb ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim().  The original return value 0 means NODE_RECLAIM_SOME
after this commit.

While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed.  This will leads to call zone_watermark_ok() again.

This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.

Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/swap.h |  6 ------
 mm/internal.h        | 10 ++++++++++
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index e643866912b70..411953964c345 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -363,14 +363,8 @@ extern unsigned long vm_total_pages;
 extern int node_reclaim_mode;
 extern int sysctl_min_unmapped_ratio;
 extern int sysctl_min_slab_ratio;
-extern int node_reclaim(struct pglist_data *, gfp_t, unsigned int);
 #else
 #define node_reclaim_mode 0
-static inline int node_reclaim(struct pglist_data *pgdat, gfp_t mask,
-				unsigned int order)
-{
-	return 0;
-}
 #endif
 
 extern int page_evictable(struct page *page);
diff --git a/mm/internal.h b/mm/internal.h
index 1df011f624801..a182506242c43 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -455,6 +455,16 @@ static inline void mminit_validate_memmodel_limits(unsigned long *start_pfn,
 #define NODE_RECLAIM_SOME	0
 #define NODE_RECLAIM_SUCCESS	1
 
+#ifdef CONFIG_NUMA
+extern int node_reclaim(struct pglist_data *, gfp_t, unsigned int);
+#else
+static inline int node_reclaim(struct pglist_data *pgdat, gfp_t mask,
+				unsigned int order)
+{
+	return NODE_RECLAIM_NOSCAN;
+}
+#endif
+
 extern int hwpoison_filter(struct page *p);
 
 extern u32 hwpoison_filter_dev_major;
-- 
2.20.1

[PATCH AUTOSEL 4.14 093/127] lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk

[Sasha Levin]

From: Alexey Skidanov <alexey.skidanov@intel.com>

[ Upstream commit 52fbf1134d479234d7e64ba9dcbaea23405f229e ]

gen_pool_alloc_algo() uses different allocation functions implementing
different allocation algorithms.  With gen_pool_first_fit_align()
allocation function, the returned address should be aligned on the
requested boundary.

If chunk start address isn't aligned on the requested boundary, the
returned address isn't aligned too.  The only way to get properly
aligned address is to initialize the pool with chunks aligned on the
requested boundary.  If want to have an ability to allocate buffers
aligned on different boundaries (for example, 4K, 1MB, ...), the chunk
start address should be aligned on the max possible alignment.

This happens because gen_pool_first_fit_align() looks for properly
aligned memory block without taking into account the chunk start address
alignment.

To fix this, we provide chunk start address to
gen_pool_first_fit_align() and change its implementation such that it
starts looking for properly aligned block with appropriate offset
(exactly as is done in CMA).

Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com
Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.com
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/genalloc.h | 13 +++++++------
 lib/genalloc.c           | 20 ++++++++++++--------
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h
index 872f930f1b06d..dd0a452373e71 100644
--- a/include/linux/genalloc.h
+++ b/include/linux/genalloc.h
@@ -51,7 +51,8 @@ typedef unsigned long (*genpool_algo_t)(unsigned long *map,
 			unsigned long size,
 			unsigned long start,
 			unsigned int nr,
-			void *data, struct gen_pool *pool);
+			void *data, struct gen_pool *pool,
+			unsigned long start_addr);
 
 /*
  *  General purpose special memory pool descriptor.
@@ -131,24 +132,24 @@ extern void gen_pool_set_algo(struct gen_pool *pool, genpool_algo_t algo,
 
 extern unsigned long gen_pool_first_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool);
+		struct gen_pool *pool, unsigned long start_addr);
 
 extern unsigned long gen_pool_fixed_alloc(unsigned long *map,
 		unsigned long size, unsigned long start, unsigned int nr,
-		void *data, struct gen_pool *pool);
+		void *data, struct gen_pool *pool, unsigned long start_addr);
 
 extern unsigned long gen_pool_first_fit_align(unsigned long *map,
 		unsigned long size, unsigned long start, unsigned int nr,
-		void *data, struct gen_pool *pool);
+		void *data, struct gen_pool *pool, unsigned long start_addr);
 
 
 extern unsigned long gen_pool_first_fit_order_align(unsigned long *map,
 		unsigned long size, unsigned long start, unsigned int nr,
-		void *data, struct gen_pool *pool);
+		void *data, struct gen_pool *pool, unsigned long start_addr);
 
 extern unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool);
+		struct gen_pool *pool, unsigned long start_addr);
 
 
 extern struct gen_pool *devm_gen_pool_create(struct device *dev,
diff --git a/lib/genalloc.c b/lib/genalloc.c
index ca06adc4f4451..5deb25c40a5a1 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -311,7 +311,7 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size,
 		end_bit = chunk_size(chunk) >> order;
 retry:
 		start_bit = algo(chunk->bits, end_bit, start_bit,
-				 nbits, data, pool);
+				 nbits, data, pool, chunk->start_addr);
 		if (start_bit >= end_bit)
 			continue;
 		remain = bitmap_set_ll(chunk->bits, start_bit, nbits);
@@ -525,7 +525,7 @@ EXPORT_SYMBOL(gen_pool_set_algo);
  */
 unsigned long gen_pool_first_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool)
+		struct gen_pool *pool, unsigned long start_addr)
 {
 	return bitmap_find_next_zero_area(map, size, start, nr, 0);
 }
@@ -543,16 +543,19 @@ EXPORT_SYMBOL(gen_pool_first_fit);
  */
 unsigned long gen_pool_first_fit_align(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool)
+		struct gen_pool *pool, unsigned long start_addr)
 {
 	struct genpool_data_align *alignment;
-	unsigned long align_mask;
+	unsigned long align_mask, align_off;
 	int order;
 
 	alignment = data;
 	order = pool->min_alloc_order;
 	align_mask = ((alignment->align + (1UL << order) - 1) >> order) - 1;
-	return bitmap_find_next_zero_area(map, size, start, nr, align_mask);
+	align_off = (start_addr & (alignment->align - 1)) >> order;
+
+	return bitmap_find_next_zero_area_off(map, size, start, nr,
+					      align_mask, align_off);
 }
 EXPORT_SYMBOL(gen_pool_first_fit_align);
 
@@ -567,7 +570,7 @@ EXPORT_SYMBOL(gen_pool_first_fit_align);
  */
 unsigned long gen_pool_fixed_alloc(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool)
+		struct gen_pool *pool, unsigned long start_addr)
 {
 	struct genpool_data_fixed *fixed_data;
 	int order;
@@ -601,7 +604,8 @@ EXPORT_SYMBOL(gen_pool_fixed_alloc);
  */
 unsigned long gen_pool_first_fit_order_align(unsigned long *map,
 		unsigned long size, unsigned long start,
-		unsigned int nr, void *data, struct gen_pool *pool)
+		unsigned int nr, void *data, struct gen_pool *pool,
+		unsigned long start_addr)
 {
 	unsigned long align_mask = roundup_pow_of_two(nr) - 1;
 
@@ -624,7 +628,7 @@ EXPORT_SYMBOL(gen_pool_first_fit_order_align);
  */
 unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
-		struct gen_pool *pool)
+		struct gen_pool *pool, unsigned long start_addr)
 {
 	unsigned long start_bit = size;
 	unsigned long len = size + 1;
-- 
2.20.1

[PATCH AUTOSEL 4.14 094/127] lib/genalloc.c: use vzalloc_node() to allocate the bitmap

[Sasha Levin]

From: Huang Shijie <sjhuang@iluvatar.ai>

[ Upstream commit 6862d2fc81859f88c1f3f660886427893f2b4f3f ]

Some devices may have big memory on chip, such as over 1G.  In some
cases, the nbytes maybe bigger then 4M which is the bounday of the
memory buddy system (4K default).

So use vzalloc_node() to allocate the bitmap.  Also use vfree to free
it.

Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/genalloc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/genalloc.c b/lib/genalloc.c
index 5deb25c40a5a1..f365d71cdc774 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -187,7 +187,7 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy
 	int nbytes = sizeof(struct gen_pool_chunk) +
 				BITS_TO_LONGS(nbits) * sizeof(long);
 
-	chunk = kzalloc_node(nbytes, GFP_KERNEL, nid);
+	chunk = vzalloc_node(nbytes, nid);
 	if (unlikely(chunk == NULL))
 		return -ENOMEM;
 
@@ -251,7 +251,7 @@ void gen_pool_destroy(struct gen_pool *pool)
 		bit = find_next_bit(chunk->bits, end_bit, 0);
 		BUG_ON(bit < end_bit);
 
-		kfree(chunk);
+		vfree(chunk);
 	}
 	kfree_const(pool->name);
 	kfree(pool);
-- 
2.20.1

[PATCH AUTOSEL 4.14 095/127] fork: fix some -Wmissing-prototypes warnings

[Sasha Levin]

From: Yi Wang <wang.yi59@zte.com.cn>

[ Upstream commit fb5bf31722d0805a3f394f7d59f2e8cd07acccb7 ]

We get a warning when building kernel with W=1:

  kernel/fork.c:167:13: warning: no previous prototype for `arch_release_thread_stack' [-Wmissing-prototypes]
  kernel/fork.c:779:13: warning: no previous prototype for `fork_init' [-Wmissing-prototypes]

Add the missing declaration in head file to fix this.

Also, remove arch_release_thread_stack() completely because no arch
seems to implement it since bb9d81264 (arch: remove tile port).

Link: http://lkml.kernel.org/r/1542170087-23645-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sched/task.h | 2 ++
 init/main.c                | 1 -
 kernel/fork.c              | 5 -----
 3 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h
index a74ec619ac510..11b4fba82950f 100644
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -39,6 +39,8 @@ void __noreturn do_task_dead(void);
 
 extern void proc_caches_init(void);
 
+extern void fork_init(void);
+
 extern void release_task(struct task_struct * p);
 
 #ifdef CONFIG_HAVE_COPY_THREAD_TLS
diff --git a/init/main.c b/init/main.c
index 51067e2db509d..b1ab36fe1a55c 100644
--- a/init/main.c
+++ b/init/main.c
@@ -98,7 +98,6 @@
 static int kernel_init(void *);
 
 extern void init_IRQ(void);
-extern void fork_init(void);
 extern void radix_tree_init(void);
 
 /*
diff --git a/kernel/fork.c b/kernel/fork.c
index 3352fdbd5e20d..3d9d6a28e21d9 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -162,10 +162,6 @@ static inline void free_task_struct(struct task_struct *tsk)
 }
 #endif
 
-void __weak arch_release_thread_stack(unsigned long *stack)
-{
-}
-
 #ifndef CONFIG_ARCH_THREAD_STACK_ALLOCATOR
 
 /*
@@ -348,7 +344,6 @@ static void release_task_stack(struct task_struct *tsk)
 		return;  /* Better to leak the stack than to free prematurely */
 
 	account_kernel_stack(tsk, -1);
-	arch_release_thread_stack(tsk->stack);
 	free_thread_stack(tsk);
 	tsk->stack = NULL;
 #ifdef CONFIG_VMAP_STACK
-- 
2.20.1

[PATCH AUTOSEL 4.14 096/127] drivers/base/platform.c: kmemleak ignore a known leak

[Sasha Levin]

From: Qian Cai <cai@gmx.us>

[ Upstream commit 967d3010df8b6f6f9aa95c198edc5fe3646ebf36 ]

unreferenced object 0xffff808ec6dc5a80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
  hex dump (first 32 bytes):
    ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b  ........kkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
    [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
    [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
    [<00000000ef135642>] acpi_default_enumeration+0x34/0x78
    [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
    [<000000002968643e>] acpi_bus_scan+0xb0/0x110
    [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
    [<00000000965b3c5a>] acpi_init+0x408/0x49c
    [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
    [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
    [<0000000070ea6c15>] kernel_init+0x18/0x138
    [<00000000fb8fff06>] ret_from_fork+0x10/0x1c
    [<0000000041273a0d>] 0xffffffffffffffff

Then, faddr2line pointed out this line,

/*
 * This memory isn't freed when the device is put,
 * I don't have a nice idea for that though.  Conceptually
 * dma_mask in struct device should not be a pointer.
 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
 */
pdev->dev.dma_mask =
	kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);

Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.

Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/platform.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 9045c5f3734e8..f1105de0d9fed 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -27,6 +27,7 @@
 #include <linux/clk/clk-conf.h>
 #include <linux/limits.h>
 #include <linux/property.h>
+#include <linux/kmemleak.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -526,6 +527,8 @@ struct platform_device *platform_device_register_full(
 		if (!pdev->dev.dma_mask)
 			goto err;
 
+		kmemleak_ignore(pdev->dev.dma_mask);
+
 		*pdev->dev.dma_mask = pdevinfo->dma_mask;
 		pdev->dev.coherent_dma_mask = pdevinfo->dma_mask;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 097/127] lib/genalloc.c: include vmalloc.h

[Sasha Levin]

From: Olof Johansson <olof@lixom.net>

[ Upstream commit 35004f2e55807a1a1491db24ab512dd2f770a130 ]

Fixes build break on most ARM/ARM64 defconfigs:

  lib/genalloc.c: In function 'gen_pool_add_virt':
  lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'?
  lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  lib/genalloc.c: In function 'gen_pool_destroy':
  lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'?

Fixes: 6862d2fc8185 ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap')
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/genalloc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/genalloc.c b/lib/genalloc.c
index f365d71cdc774..7e85d1e37a6ea 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 #include <linux/of_device.h>
+#include <linux/vmalloc.h>
 
 static inline size_t chunk_size(const struct gen_pool_chunk *chunk)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.14 098/127] mtd: Check add_mtd_device() ret code

[Sasha Levin]

From: Boris Brezillon <bbrezillon@kernel.org>

[ Upstream commit 2b6f0090a3335b7bdd03ca520c35591159463041 ]

add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/mtdcore.h |  2 +-
 drivers/mtd/mtdpart.c | 36 +++++++++++++++++++++++++++++++-----
 2 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 37accfd0400e5..24480b75a88dd 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -7,7 +7,7 @@
 extern struct mutex mtd_table_mutex;
 
 struct mtd_info *__mtd_next_device(int i);
-int add_mtd_device(struct mtd_info *mtd);
+int __must_check add_mtd_device(struct mtd_info *mtd);
 int del_mtd_device(struct mtd_info *mtd);
 int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
 int del_mtd_partitions(struct mtd_info *);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index a308e707392d5..27d9785487d69 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -684,10 +684,22 @@ int mtd_add_partition(struct mtd_info *parent, const char *name,
 	list_add(&new->list, &mtd_partitions);
 	mutex_unlock(&mtd_partitions_mutex);
 
-	add_mtd_device(&new->mtd);
+	ret = add_mtd_device(&new->mtd);
+	if (ret)
+		goto err_remove_part;
 
 	mtd_add_partition_attrs(new);
 
+	return 0;
+
+err_remove_part:
+	mutex_lock(&mtd_partitions_mutex);
+	list_del(&new->list);
+	mutex_unlock(&mtd_partitions_mutex);
+
+	free_partition(new);
+	pr_info("%s:%i\n", __func__, __LINE__);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(mtd_add_partition);
@@ -778,22 +790,31 @@ int add_mtd_partitions(struct mtd_info *master,
 {
 	struct mtd_part *slave;
 	uint64_t cur_offset = 0;
-	int i;
+	int i, ret;
 
 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
 		slave = allocate_partition(master, parts + i, i, cur_offset);
 		if (IS_ERR(slave)) {
-			del_mtd_partitions(master);
-			return PTR_ERR(slave);
+			ret = PTR_ERR(slave);
+			goto err_del_partitions;
 		}
 
 		mutex_lock(&mtd_partitions_mutex);
 		list_add(&slave->list, &mtd_partitions);
 		mutex_unlock(&mtd_partitions_mutex);
 
-		add_mtd_device(&slave->mtd);
+		ret = add_mtd_device(&slave->mtd);
+		if (ret) {
+			mutex_lock(&mtd_partitions_mutex);
+			list_del(&slave->list);
+			mutex_unlock(&mtd_partitions_mutex);
+
+			free_partition(slave);
+			goto err_del_partitions;
+		}
+
 		mtd_add_partition_attrs(slave);
 		if (parts[i].types)
 			mtd_parse_part(slave, parts[i].types);
@@ -802,6 +823,11 @@ int add_mtd_partitions(struct mtd_info *master,
 	}
 
 	return 0;
+
+err_del_partitions:
+	del_mtd_partitions(master);
+
+	return ret;
 }
 
 static DEFINE_SPINLOCK(part_parser_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.14 099/127] tipc: fix memory leak in tipc_nl_compat_publ_dump

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit f87d8ad9233f115db92c6c087d58403b0009ed36 ]

There is a memory leak in case genlmsg_put fails.

Fix this by freeing *args* before return.

Addresses-Coverity-ID: 1476406 ("Resource leak")
Fixes: 46273cf7e009 ("tipc: fix a missing check of genlmsg_put")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/netlink_compat.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 91d51a595ac23..bbd05707c4e07 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -974,8 +974,10 @@ static int tipc_nl_compat_publ_dump(struct tipc_nl_compat_msg *msg, u32 sock)
 
 	hdr = genlmsg_put(args, 0, 0, &tipc_genl_family, NLM_F_MULTI,
 			  TIPC_NL_PUBL_GET);
-	if (!hdr)
+	if (!hdr) {
+		kfree_skb(args);
 		return -EMSGSIZE;
+	}
 
 	nest = nla_nest_start(args, TIPC_NLA_SOCK);
 	if (!nest) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 100/127] net/core/neighbour: tell kmemleak about hash tables

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 85704cb8dcfd88d351bfc87faaeba1c8214f3177 ]

This fixes false-positive kmemleak reports about leaked neighbour entries:

unreferenced object 0xffff8885c6e4d0a8 (size 1024):
  comm "softirq", pid 0, jiffies 4294922664 (age 167640.804s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff  ........ ,......
    08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00  ..._......}.....
  backtrace:
    [<00000000748509fe>] ip6_finish_output2+0x887/0x1e40
    [<0000000036d7a0d8>] ip6_output+0x1ba/0x600
    [<0000000027ea7dba>] ip6_send_skb+0x92/0x2f0
    [<00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0
    [<000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0
    [<000000004bd5fa90>] sock_sendmsg+0xb3/0xf0
    [<000000008227b29f>] ___sys_sendmsg+0x745/0x8f0
    [<000000008698009d>] __sys_sendmsg+0xde/0x170
    [<00000000889dacf1>] do_syscall_64+0x9b/0x400
    [<0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000005767ed39>] 0xffffffffffffffff

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index eb3efeabac91d..9a28a21a51f05 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -18,6 +18,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/slab.h>
+#include <linux/kmemleak.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -361,12 +362,14 @@ static struct neigh_hash_table *neigh_hash_alloc(unsigned int shift)
 	ret = kmalloc(sizeof(*ret), GFP_ATOMIC);
 	if (!ret)
 		return NULL;
-	if (size <= PAGE_SIZE)
+	if (size <= PAGE_SIZE) {
 		buckets = kzalloc(size, GFP_ATOMIC);
-	else
+	} else {
 		buckets = (struct neighbour __rcu **)
 			  __get_free_pages(GFP_ATOMIC | __GFP_ZERO,
 					   get_order(size));
+		kmemleak_alloc(buckets, size, 0, GFP_ATOMIC);
+	}
 	if (!buckets) {
 		kfree(ret);
 		return NULL;
@@ -386,10 +389,12 @@ static void neigh_hash_free_rcu(struct rcu_head *head)
 	size_t size = (1 << nht->hash_shift) * sizeof(struct neighbour *);
 	struct neighbour __rcu **buckets = nht->hash_buckets;
 
-	if (size <= PAGE_SIZE)
+	if (size <= PAGE_SIZE) {
 		kfree(buckets);
-	else
+	} else {
+		kmemleak_free(buckets);
 		free_pages((unsigned long)buckets, get_order(size));
+	}
 	kfree(nht);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 101/127] PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 77f88abd4a6f73a1a68dbdc0e3f21575fd508fc3 ]

The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if
fewer than @min_vecs interrupt vectors are available for @dev.

However, if a device supports MSI-X but not MSI and a caller requests
@min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL
(from the failed attempt to enable MSI), not -ENOSPC.

When -ENOSPC is returned, callers may reduce the number IRQs they request
and try again.  Most callers can use the @min_vecs and @max_vecs
parameters to avoid this retry loop, but that doesn't work when using IRQ
affinity "nr_sets" because rebalancing the sets is driver-specific.

This return value bug has been present since pci_alloc_irq_vectors() was
added in v4.10 by aff171641d18 ("PCI: Provide sensible IRQ vector
alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs
removed the need for callers to iteratively reduce the number of IRQs
requested and retry the allocation, so they didn't need to distinguish
-ENOSPC from -EINVAL.

In v5.0, 6da4b3ab9a6e ("genirq/affinity: Add support for allocating
interrupt sets") added IRQ sets to the interface, which reintroduced the
need to check for -ENOSPC and possibly reduce the number of IRQs requested
and retry the allocation.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/msi.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 536e9a5cd2b14..d66ef88e13cf1 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1156,7 +1156,8 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
 				   const struct irq_affinity *affd)
 {
 	static const struct irq_affinity msi_default_affd;
-	int vecs = -ENOSPC;
+	int msix_vecs = -ENOSPC;
+	int msi_vecs = -ENOSPC;
 
 	if (flags & PCI_IRQ_AFFINITY) {
 		if (!affd)
@@ -1167,16 +1168,17 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
 	}
 
 	if (flags & PCI_IRQ_MSIX) {
-		vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
-				affd);
-		if (vecs > 0)
-			return vecs;
+		msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs,
+						    max_vecs, affd);
+		if (msix_vecs > 0)
+			return msix_vecs;
 	}
 
 	if (flags & PCI_IRQ_MSI) {
-		vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, affd);
-		if (vecs > 0)
-			return vecs;
+		msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs,
+						  affd);
+		if (msi_vecs > 0)
+			return msi_vecs;
 	}
 
 	/* use legacy irq if allowed */
@@ -1187,7 +1189,9 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
 		}
 	}
 
-	return vecs;
+	if (msix_vecs == -ENOSPC)
+		return -ENOSPC;
+	return msi_vecs;
 }
 EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 102/127] net/core/neighbour: fix kmemleak minimal reference count for hash tables

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 01b833ab44c9e484060aad72267fc7e71beb559b ]

This should be 1 for normal allocations, 0 disables leak reporting.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: 85704cb8dcfd ("net/core/neighbour: tell kmemleak about hash tables")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 9a28a21a51f05..2664ad58e5c01 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -368,7 +368,7 @@ static struct neigh_hash_table *neigh_hash_alloc(unsigned int shift)
 		buckets = (struct neighbour __rcu **)
 			  __get_free_pages(GFP_ATOMIC | __GFP_ZERO,
 					   get_order(size));
-		kmemleak_alloc(buckets, size, 0, GFP_ATOMIC);
+		kmemleak_alloc(buckets, size, 1, GFP_ATOMIC);
 	}
 	if (!buckets) {
 		kfree(ret);
-- 
2.20.1

[PATCH AUTOSEL 4.14 103/127] serial: 8250: Fix serial8250 initialization crash

[Sasha Levin]

From: He Zhe <zhe.he@windriver.com>

[ Upstream commit 352c4cf40c4a7d439fa5d30aa2160f54b394da82 ]

The initialization code of interrupt backoff work might reference NULL
pointer and cause the following crash, if no port was found.

[   10.017727] CPU 0 Unable to handle kernel paging request at virtual address 000001b0, epc == 807088e0, ra == 8070863c
---- snip ----
[   11.704470] [<807088e0>] serial8250_register_8250_port+0x318/0x4ac
[   11.747251] [<80708d74>] serial8250_probe+0x148/0x1c0
[   11.789301] [<80728450>] platform_drv_probe+0x40/0x94
[   11.830515] [<807264f8>] really_probe+0xf8/0x318
[   11.870876] [<80726b7c>] __driver_attach+0x110/0x12c
[   11.910960] [<80724374>] bus_for_each_dev+0x78/0xcc
[   11.951134] [<80725958>] bus_add_driver+0x200/0x234
[   11.989756] [<807273d8>] driver_register+0x84/0x148
[   12.029832] [<80d72f84>] serial8250_init+0x138/0x198
[   12.070447] [<80100e6c>] do_one_initcall+0x5c/0x2a0
[   12.110104] [<80d3a208>] kernel_init_freeable+0x370/0x484
[   12.150722] [<80a49420>] kernel_init+0x10/0xf8
[   12.191517] [<8010756c>] ret_from_kernel_thread+0x14/0x1c

This patch makes sure the initialization code can be reached only if a port
is found.

Fixes: 6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during input overruns")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_core.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ceeea4b159c4b..c698ebab6d3bd 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1077,15 +1077,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 
 			ret = 0;
 		}
-	}
 
-	/* Initialise interrupt backoff work if required */
-	if (up->overrun_backoff_time_ms > 0) {
-		uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
-		INIT_DELAYED_WORK(&uart->overrun_backoff,
-				  serial_8250_overrun_backoff_work);
-	} else {
-		uart->overrun_backoff_time_ms = 0;
+		/* Initialise interrupt backoff work if required */
+		if (up->overrun_backoff_time_ms > 0) {
+			uart->overrun_backoff_time_ms =
+				up->overrun_backoff_time_ms;
+			INIT_DELAYED_WORK(&uart->overrun_backoff,
+					serial_8250_overrun_backoff_work);
+		} else {
+			uart->overrun_backoff_time_ms = 0;
+		}
 	}
 
 	mutex_unlock(&serial_mutex);
-- 
2.20.1

[PATCH AUTOSEL 4.14 104/127] gpu: ipu-v3: pre: don't trigger update if buffer address doesn't change

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit eb0200a4357da100064971689d3a0e9e3cf57f33 ]

On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.

Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-pre.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c
index 1d1612e28854b..6fd4af647f599 100644
--- a/drivers/gpu/ipu-v3/ipu-pre.c
+++ b/drivers/gpu/ipu-v3/ipu-pre.c
@@ -102,6 +102,7 @@ struct ipu_pre {
 	void			*buffer_virt;
 	bool			in_use;
 	unsigned int		safe_window_end;
+	unsigned int		last_bufaddr;
 };
 
 static DEFINE_MUTEX(ipu_pre_list_mutex);
@@ -177,6 +178,7 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
 
 	writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) |
 	      IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) |
@@ -218,7 +220,11 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
 	unsigned short current_yblock;
 	u32 val;
 
+	if (bufaddr == pre->last_bufaddr)
+		return;
+
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	do {
 		if (time_after(jiffies, timeout)) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 105/127] sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe

[Sasha Levin]

From: Edward Cree <ecree@solarflare.com>

[ Upstream commit 3366463513f544c12c6b88c13da4462ee9e7a1a1 ]

Use a bitmap to keep track of which partition types we've already seen;
 for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
 thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
 sfc NICs.  Prior to this patch they cause sysfs_warn_dup errors because
 they have the same name, causing us not to expose any MTDs at all.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 09352ee43b55c..cc3be94d05622 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -5852,22 +5852,25 @@ static const struct efx_ef10_nvram_type_info efx_ef10_nvram_types[] = {
 	{ NVRAM_PARTITION_TYPE_LICENSE,		   0,    0, "sfc_license" },
 	{ NVRAM_PARTITION_TYPE_PHY_MIN,		   0xff, 0, "sfc_phy_fw" },
 };
+#define EF10_NVRAM_PARTITION_COUNT	ARRAY_SIZE(efx_ef10_nvram_types)
 
 static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 					struct efx_mcdi_mtd_partition *part,
-					unsigned int type)
+					unsigned int type,
+					unsigned long *found)
 {
 	MCDI_DECLARE_BUF(inbuf, MC_CMD_NVRAM_METADATA_IN_LEN);
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_METADATA_OUT_LENMAX);
 	const struct efx_ef10_nvram_type_info *info;
 	size_t size, erase_size, outlen;
+	int type_idx = 0;
 	bool protected;
 	int rc;
 
-	for (info = efx_ef10_nvram_types; ; info++) {
-		if (info ==
-		    efx_ef10_nvram_types + ARRAY_SIZE(efx_ef10_nvram_types))
+	for (type_idx = 0; ; type_idx++) {
+		if (type_idx == EF10_NVRAM_PARTITION_COUNT)
 			return -ENODEV;
+		info = efx_ef10_nvram_types + type_idx;
 		if ((type & ~info->type_mask) == info->type)
 			break;
 	}
@@ -5880,6 +5883,13 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 	if (protected)
 		return -ENODEV; /* hide it */
 
+	/* If we've already exposed a partition of this type, hide this
+	 * duplicate.  All operations on MTDs are keyed by the type anyway,
+	 * so we can't act on the duplicate.
+	 */
+	if (__test_and_set_bit(type_idx, found))
+		return -EEXIST;
+
 	part->nvram_type = type;
 
 	MCDI_SET_DWORD(inbuf, NVRAM_METADATA_IN_TYPE, type);
@@ -5908,6 +5918,7 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 static int efx_ef10_mtd_probe(struct efx_nic *efx)
 {
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX);
+	DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT);
 	struct efx_mcdi_mtd_partition *parts;
 	size_t outlen, n_parts_total, i, n_parts;
 	unsigned int type;
@@ -5936,11 +5947,13 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)
 	for (i = 0; i < n_parts_total; i++) {
 		type = MCDI_ARRAY_DWORD(outbuf, NVRAM_PARTITIONS_OUT_TYPE_ID,
 					i);
-		rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type);
-		if (rc == 0)
-			n_parts++;
-		else if (rc != -ENODEV)
+		rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type,
+						  found);
+		if (rc == -EEXIST || rc == -ENODEV)
+			continue;
+		if (rc)
 			goto fail;
+		n_parts++;
 	}
 
 	rc = efx_mtd_add(efx, &parts[0].common, n_parts, sizeof(*parts));
-- 
2.20.1

[PATCH AUTOSEL 4.14 106/127] ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel

[Sasha Levin]

From: wenxu <wenxu@ucloud.cn>

[ Upstream commit d71b57532d70c03f4671dd04e84157ac6bf021b0 ]

ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24

Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst

With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_tunnel.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index fabc299cb875f..7a31287ff1232 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -661,13 +661,19 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 	dst = tnl_params->daddr;
 	if (dst == 0) {
 		/* NBMA tunnel */
+		struct ip_tunnel_info *tun_info;
 
 		if (!skb_dst(skb)) {
 			dev->stats.tx_fifo_errors++;
 			goto tx_error;
 		}
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		tun_info = skb_tunnel_info(skb);
+		if (tun_info && (tun_info->mode & IP_TUNNEL_INFO_TX) &&
+		    ip_tunnel_info_af(tun_info) == AF_INET &&
+		    tun_info->key.u.ipv4.dst)
+			dst = tun_info->key.u.ipv4.dst;
+		else if (skb->protocol == htons(ETH_P_IP)) {
 			rt = skb_rtable(skb);
 			dst = rt_nexthop(rt, inner_iph->daddr);
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 107/127] decnet: fix DN_IFREQ_SIZE

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 50c2936634bcb1db78a8ca63249236810c11a80f ]

Digging through the ioctls with Al because of the previous
patches, we found that on 64-bit decnet's dn_dev_ioctl()
is wrong, because struct ifreq::ifr_ifru is actually 24
bytes (not 16 as expected from struct sockaddr) due to the
ifru_map and ifru_settings members.

Clearly, decnet expects the ioctl to be called with a struct
like
  struct ifreq_dn {
    char ifr_name[IFNAMSIZ];
    struct sockaddr_dn ifr_addr;
  };

since it does
  struct ifreq *ifr = ...;
  struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr;

This means that DN_IFREQ_SIZE is too big for what it wants on
64-bit, as it is
  sizeof(struct ifreq) - sizeof(struct sockaddr) +
  sizeof(struct sockaddr_dn)

This assumes that sizeof(struct sockaddr) is the size of ifr_ifru
but that isn't true.

Fix this to use offsetof(struct ifreq, ifr_ifru).

This indeed doesn't really matter much - the result is that we
copy in/out 8 bytes more than we should on 64-bit platforms. In
case the "struct ifreq_dn" lands just on the end of a page though
it might lead to faults.

As far as I can tell, it has been like this forever, so it seems
very likely that nobody cares.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/decnet/dn_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index df042b6d80b83..22876a197ebec 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -56,7 +56,7 @@
 #include <net/dn_neigh.h>
 #include <net/dn_fib.h>
 
-#define DN_IFREQ_SIZE (sizeof(struct ifreq) - sizeof(struct sockaddr) + sizeof(struct sockaddr_dn))
+#define DN_IFREQ_SIZE (offsetof(struct ifreq, ifr_ifru) + sizeof(struct sockaddr_dn))
 
 static char dn_rt_all_end_mcast[ETH_ALEN] = {0xAB,0x00,0x00,0x04,0x00,0x00};
 static char dn_rt_all_rt_mcast[ETH_ALEN]  = {0xAB,0x00,0x00,0x03,0x00,0x00};
-- 
2.20.1

[PATCH AUTOSEL 4.14 108/127] net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()

[Sasha Levin]

From: Karsten Graul <kgraul@linux.ibm.com>

[ Upstream commit 77f838ace755d2f466536c44dac6c856f62cd901 ]

To prevent races between smc_lgr_terminate() and smc_conn_free() add an
extra check of the lgr field before accessing it, and cancel a delayed
free_work when a new smc connection is created.
This fixes the problem that free_work cleared the lgr variable but
smc_lgr_terminate() or smc_conn_free() still access it in parallel.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index f04a037dc9677..0de788fa43e95 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -103,6 +103,8 @@ static void smc_lgr_unregister_conn(struct smc_connection *conn)
 	struct smc_link_group *lgr = conn->lgr;
 	int reduced = 0;
 
+	if (!lgr)
+		return;
 	write_lock_bh(&lgr->conns_lock);
 	if (conn->alert_token_local) {
 		reduced = 1;
@@ -431,6 +433,8 @@ int smc_conn_create(struct smc_sock *smc, __be32 peer_in_addr,
 			local_contact = SMC_REUSE_CONTACT;
 			conn->lgr = lgr;
 			smc_lgr_register_conn(conn); /* add smc conn to lgr */
+			if (delayed_work_pending(&lgr->free_work))
+				cancel_delayed_work(&lgr->free_work);
 			write_unlock_bh(&lgr->conns_lock);
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 109/127] blktrace: Show requests without sector

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 0803de78049fe1b0baf44bcddc727b036fb9139b ]

Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/blktrace_api.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 8804753805ac5..7bb2d8de9f308 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -116,7 +116,13 @@ extern void blk_fill_rwbs(char *rwbs, unsigned int op, int bytes);
 
 static inline sector_t blk_rq_trace_sector(struct request *rq)
 {
-	return blk_rq_is_passthrough(rq) ? 0 : blk_rq_pos(rq);
+	/*
+	 * Tracing should ignore starting sector for passthrough requests and
+	 * requests where starting sector didn't get set.
+	 */
+	if (blk_rq_is_passthrough(rq) || blk_rq_pos(rq) == (sector_t)-1)
+		return 0;
+	return blk_rq_pos(rq);
 }
 
 static inline unsigned int blk_rq_trace_nr_sectors(struct request *rq)
-- 
2.20.1

[PATCH AUTOSEL 4.14 110/127] tipc: fix skb may be leaky in tipc_link_input

[Sasha Levin]

From: Hoang Le <hoang.h.le@dektech.com.au>

[ Upstream commit 7384b538d3aed2ed49d3575483d17aeee790fb06 ]

When we free skb at tipc_data_input, we return a 'false' boolean.
Then, skb passed to subcalling tipc_link_input in tipc_link_rcv,

<snip>
1303 int tipc_link_rcv:
...
1354    if (!tipc_data_input(l, skb, l->inputq))
1355        rc |= tipc_link_input(l, skb, l->inputq);
</snip>

Fix it by simple changing to a 'true' boolean when skb is being free-ed.
Then, tipc_link_rcv will bypassed to subcalling tipc_link_input as above
condition.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <maloy@donjonn.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/link.c b/net/tipc/link.c
index 631bfc7e9127e..da749916faac4 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1073,7 +1073,7 @@ static bool tipc_data_input(struct tipc_link *l, struct sk_buff *skb,
 	default:
 		pr_warn("Dropping received illegal msg type\n");
 		kfree_skb(skb);
-		return false;
+		return true;
 	};
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 111/127] sfc: initialise found bitmap in efx_ef10_mtd_probe

[Sasha Levin]

From: Bert Kenward <bkenward@solarflare.com>

[ Upstream commit c65285428b6e7797f1bb063f33b0ae7e93397b7b ]

The bitmap of found partitions in efx_ef10_mtd_probe was not
initialised, causing partitions to be suppressed based off whatever
value was in the bitmap at the start.

Fixes: 3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index cc3be94d05622..2d92a9fe4606c 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -5918,7 +5918,7 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
 static int efx_ef10_mtd_probe(struct efx_nic *efx)
 {
 	MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX);
-	DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT);
+	DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT) = { 0 };
 	struct efx_mcdi_mtd_partition *parts;
 	size_t outlen, n_parts_total, i, n_parts;
 	unsigned int type;
-- 
2.20.1

[PATCH AUTOSEL 4.14 112/127] net: fix possible overflow in __sk_mem_raise_allocated()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5bf325a53202b8728cf7013b72688c46071e212e ]

With many active TCP sockets, fat TCP sockets could fool
__sk_mem_raise_allocated() thanks to an overflow.

They would increase their share of the memory, instead
of decreasing it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 net/core/sock.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 780c6c0a86f04..0af46cbd3649c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1232,7 +1232,7 @@ static inline void sk_sockets_allocated_inc(struct sock *sk)
 	percpu_counter_inc(sk->sk_prot->sockets_allocated);
 }
 
-static inline int
+static inline u64
 sk_sockets_allocated_read_positive(struct sock *sk)
 {
 	return percpu_counter_read_positive(sk->sk_prot->sockets_allocated);
diff --git a/net/core/sock.c b/net/core/sock.c
index 7ccbcd853cbce..90ccbbf9e6b00 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2357,7 +2357,7 @@ int __sk_mem_raise_allocated(struct sock *sk, int size, int amt, int kind)
 	}
 
 	if (sk_has_memory_pressure(sk)) {
-		int alloc;
+		u64 alloc;
 
 		if (!sk_under_memory_pressure(sk))
 			return 1;
-- 
2.20.1

[PATCH AUTOSEL 4.14 113/127] sctp: don't compare hb_timer expire date before starting it

[Sasha Levin]

From: Maciej Kwiecien <maciej.kwiecien@nokia.com>

[ Upstream commit d1f20c03f48102e52eb98b8651d129b83134cae4 ]

hb_timer might not start at all for a particular transport because its
start is conditional. In a result a node is not sending heartbeats.

Function sctp_transport_reset_hb_timer has two roles:
    - initial start of hb_timer for a given transport,
    - update expire date of hb_timer for a given transport.
The function is optimized to update timer's expire only if it is before
a new calculated one but this comparison is invalid for a timer which
has not yet started. Such a timer has expire == 0 and if a new expire
value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will
fail and timer will not start resulting in no heartbeat packets send by
the node.

This was found when association was initialized within first 5 mins
after system boot due to jiffies init value which is near to MAX_JIFFIES.

Test kernel version: 4.9.154 (ARCH=arm)
hb_timer.expire = 0;                //initialized, not started timer
new_expire = MAX_JIFFIES / 2 + 2;   //or more
time_before(hb_timer.expire, new_expire) == false

Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Reported-by: Marcin Stojek <marcin.stojek@nokia.com>
Tested-by: Marcin Stojek <marcin.stojek@nokia.com>
Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/transport.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index 43105cf04bc45..274df899e7bfa 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -210,7 +210,8 @@ void sctp_transport_reset_hb_timer(struct sctp_transport *transport)
 
 	/* When a data chunk is sent, reset the heartbeat interval.  */
 	expires = jiffies + sctp_transport_timeout(transport);
-	if (time_before(transport->hb_timer.expires, expires) &&
+	if ((time_before(transport->hb_timer.expires, expires) ||
+	     !timer_pending(&transport->hb_timer)) &&
 	    !mod_timer(&transport->hb_timer,
 		       expires + prandom_u32_max(transport->rto)))
 		sctp_transport_hold(transport);
-- 
2.20.1

[PATCH AUTOSEL 4.14 114/127] bpf: decrease usercnt if bpf_map_new_fd() fails in bpf_map_get_fd_by_id()

[Sasha Levin]

From: Peng Sun <sironhide0null@gmail.com>

[ Upstream commit 781e62823cb81b972dc8652c1827205cda2ac9ac ]

In bpf/syscall.c, bpf_map_get_fd_by_id() use bpf_map_inc_not_zero()
to increase the refcount, both map->refcnt and map->usercnt. Then, if
bpf_map_new_fd() fails, should handle map->usercnt too.

Fixes: bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 59d2e94ecb798..34110450a78f2 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1354,7 +1354,7 @@ static int bpf_map_get_fd_by_id(const union bpf_attr *attr)
 
 	fd = bpf_map_new_fd(map);
 	if (fd < 0)
-		bpf_map_put(map);
+		bpf_map_put_with_uref(map);
 
 	return fd;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 115/127] net: dev: Use unsigned integer as an argument to left-shift

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit f4d7b3e23d259c44f1f1c39645450680fcd935d6 ]

1 << 31 is Undefined Behaviour according to the C standard.
Use U type modifier to avoid theoretical overflow.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 40b830d55fe50..4725a9d9597fc 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3522,7 +3522,7 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
 	if (debug_value == 0)	/* no output */
 		return 0;
 	/* set low N bits */
-	return (1 << debug_value) - 1;
+	return (1U << debug_value) - 1;
 }
 
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
-- 
2.20.1

[PATCH AUTOSEL 4.14 117/127] bpf: drop refcount if bpf_map_new_fd() fails in map_create()

[Sasha Levin]

From: Peng Sun <sironhide0null@gmail.com>

[ Upstream commit 352d20d611414715353ee65fc206ee57ab1a6984 ]

In bpf/syscall.c, map_create() first set map->usercnt to 1, a file
descriptor is supposed to return to userspace. When bpf_map_new_fd()
fails, drop the refcount.

Fixes: bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 34110450a78f2..f5c1d5479ba3d 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -348,12 +348,12 @@ static int map_create(union bpf_attr *attr)
 	err = bpf_map_new_fd(map);
 	if (err < 0) {
 		/* failed to allocate fd.
-		 * bpf_map_put() is needed because the above
+		 * bpf_map_put_with_uref() is needed because the above
 		 * bpf_map_alloc_id() has published the map
 		 * to the userspace and the userspace may
 		 * have refcnt-ed it through BPF_MAP_GET_FD_BY_ID.
 		 */
-		bpf_map_put(map);
+		bpf_map_put_with_uref(map);
 		return err;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 118/127] net: hns3: Change fw error code NOT_EXEC to NOT_SUPPORTED

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 4a402f47cfce904051cd8b31bef4fe2910d9dce9 ]

According to firmware error code definition, the error code of 2
means NOT_SUPPORTED, this patch changes it to NOT_SUPPORTED.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 8b511e6e0ce9d..396ea0db71023 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -251,6 +251,8 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
 			if ((enum hclge_cmd_return_status)desc_ret ==
 			    HCLGE_CMD_EXEC_SUCCESS)
 				retval = 0;
+			else if (desc_ret == HCLGE_CMD_NOT_SUPPORTED)
+				retval = -EOPNOTSUPP;
 			else
 				retval = -EIO;
 			hw->cmq.last_status = (enum hclge_cmd_status)desc_ret;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 758cf39481312..3823ae6303ad6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -52,7 +52,7 @@ struct hclge_cmq_ring {
 enum hclge_cmd_return_status {
 	HCLGE_CMD_EXEC_SUCCESS	= 0,
 	HCLGE_CMD_NO_AUTH	= 1,
-	HCLGE_CMD_NOT_EXEC	= 2,
+	HCLGE_CMD_NOT_SUPPORTED	= 2,
 	HCLGE_CMD_QUEUE_FULL	= 3,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 119/127] iommu/amd: Fix NULL dereference bug in match_hid_uid

[Sasha Levin]

From: Aaron Ma <aaron.ma@canonical.com>

[ Upstream commit bb6bccba390c7d743c1e4427de4ef284c8cc6869 ]

Add a non-NULL check to fix potential NULL pointer dereference
Cleanup code to call function once.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 2bf9a0a12749b ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 07b6cf58fd99b..d09c24825734e 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -139,10 +139,14 @@ static struct lock_class_key reserved_rbtree_key;
 static inline int match_hid_uid(struct device *dev,
 				struct acpihid_map_entry *entry)
 {
+	struct acpi_device *adev = ACPI_COMPANION(dev);
 	const char *hid, *uid;
 
-	hid = acpi_device_hid(ACPI_COMPANION(dev));
-	uid = acpi_device_uid(ACPI_COMPANION(dev));
+	if (!adev)
+		return -ENODEV;
+
+	hid = acpi_device_hid(adev);
+	uid = acpi_device_uid(adev);
 
 	if (!hid || !(*hid))
 		return -ENODEV;
-- 
2.20.1

[PATCH AUTOSEL 4.14 120/127] apparmor: delete the dentry in aafs_remove() to avoid a leak

[Sasha Levin]

From: Chris Coulson <chris.coulson@canonical.com>

[ Upstream commit 201218e4d3dfa1346e30997f48725acce3f26d01 ]

Although the apparmorfs dentries are always dropped from the dentry cache
when the usage count drops to zero, there is no guarantee that this will
happen in aafs_remove(), as another thread might still be using it. In
this scenario, this means that the dentry will temporarily continue to
appear in the results of lookups, even after the call to aafs_remove().

In the case of removal of a profile - it also causes simple_rmdir()
on the profile directory to fail, as the directory won't be empty until
the usage counts of all child dentries have decreased to zero. This
results in the dentry for the profile directory leaking and appearing
empty in the file system tree forever.

Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/apparmorfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index dd746bd69a9b2..c106988c1b254 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -363,6 +363,7 @@ static void aafs_remove(struct dentry *dentry)
 			simple_rmdir(dir, dentry);
 		else
 			simple_unlink(dir, dentry);
+		d_delete(dentry);
 		dput(dentry);
 	}
 	inode_unlock(dir);
-- 
2.20.1

[PATCH AUTOSEL 4.14 121/127] scsi: libsas: Support SATA PHY connection rate unmatch fixing during discovery

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit cec9771d2e954650095aa37a6a97722c8194e7d2 ]

   +----------+             +----------+
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |initiator |             |          |
   | device   |--- 3.0 G ---| Expander |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   |          |             |          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   +----------+             +----------+

According to Serial Attached SCSI - 1.1 (SAS-1.1):
If an expander PHY attached to a SATA PHY is using a physical link rate
greater than the maximum connection rate supported by the pathway from an
STP initiator port, a management application client should use the SMP PHY
CONTROL function (see 10.4.3.10) to set the PROGRAMMED MAXIMUM PHYSICAL
LINK RATE field of the expander PHY to the maximum connection rate
supported by the pathway from that STP initiator port.

Currently libsas does not support checking if this condition occurs, nor
rectifying when it does.

Such a condition is not at all common, however it has been seen on some
pre-silicon environments where the initiator PHY only supports a 1.5 Gbit
maximum linkrate, mated with 12G expander PHYs and 3/6G SATA phy.

This patch adds support for checking and rectifying this condition during
initial device discovery only.

We do support checking min pathway connection rate during revalidation phase,
when new devices can be detected in the topology. However we do not
support in the case of the the user reprogramming PHY linkrates, such that
min pathway condition is not met/maintained.

A note on root port PHY rates:
The libsas root port PHY rates calculation is broken. Libsas sets the
rates (min, max, and current linkrate) of a root port to the same linkrate
of the first PHY member of that same port. In doing so, it assumes that
all other PHYs which subsequently join the port to have the same
negotiated linkrate, when they could actually be different.

In practice this doesn't happen, as initiator and expander PHYs are
normally initialised with consistent min/max linkrates.

This has not caused an issue so far, so leave alone for now.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 259ee0d3c3e61..819a655473588 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -817,6 +817,26 @@ static struct domain_device *sas_ex_discover_end_dev(
 
 #ifdef CONFIG_SCSI_SAS_ATA
 	if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
+		if (child->linkrate > parent->min_linkrate) {
+			struct sas_phy_linkrates rates = {
+				.maximum_linkrate = parent->min_linkrate,
+				.minimum_linkrate = parent->min_linkrate,
+			};
+			int ret;
+
+			pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
+				   SAS_ADDR(child->sas_addr), phy_id);
+			ret = sas_smp_phy_control(parent, phy_id,
+						  PHY_FUNC_LINK_RESET, &rates);
+			if (ret) {
+				pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
+				       SAS_ADDR(child->sas_addr), phy_id, ret);
+				goto out_free;
+			}
+			pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
+				  SAS_ADDR(child->sas_addr), phy_id);
+			child->linkrate = child->min_linkrate;
+		}
 		res = sas_get_ata_info(child, phy);
 		if (res)
 			goto out_free;
-- 
2.20.1

[PATCH AUTOSEL 4.14 122/127] ACPI / APEI: Don't wait to serialise with oops messages when panic()ing

[Sasha Levin]

From: James Morse <james.morse@arm.com>

[ Upstream commit 78b0b690f6558ed788dccafa45965325dd11ba89 ]

oops_begin() exists to group printk() messages with the oops message
printed by die(). To reach this caller we know that platform firmware
took this error first, then notified the OS via NMI with a 'panic'
severity.

Don't wait for another CPU to release the die-lock before panic()ing,
our only goal is to print this fatal error and panic().

This code is always called in_nmi(), and since commit 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), it has been
safe to call printk() from this context. Messages are batched in a
per-cpu buffer and printed via irq-work, or a call back from panic().

Link: https://patchwork.kernel.org/patch/10313555/
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/apei/ghes.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 5889f6407fea8..9c31c7cd5cb5e 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -33,7 +33,6 @@
 #include <linux/interrupt.h>
 #include <linux/timer.h>
 #include <linux/cper.h>
-#include <linux/kdebug.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/ratelimit.h>
@@ -936,7 +935,6 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs)
 
 		sev = ghes_severity(ghes->estatus->error_severity);
 		if (sev >= GHES_SEV_PANIC) {
-			oops_begin();
 			ghes_print_queued_estatus();
 			__ghes_panic(ghes);
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 123/127] ACPI / APEI: Switch estatus pool to use vmalloc memory

[Sasha Levin]

From: James Morse <james.morse@arm.com>

[ Upstream commit 0ac234be1a9497498e57d958f4251f5257b116b4 ]

The ghes code is careful to parse and round firmware's advertised
memory requirements for CPER records, up to a maximum of 64K.
However when ghes_estatus_pool_expand() does its work, it splits
the requested size into PAGE_SIZE granules.

This means if firmware generates 5K of CPER records, and correctly
describes this in the table, __process_error() will silently fail as it
is unable to allocate more than PAGE_SIZE.

Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory
may fault and be fixed up by vmalloc_fault(). To prevent this call
vmalloc_sync_all() before an NMI handler could discover the memory.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/apei/ghes.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 9c31c7cd5cb5e..cd6fae6ad4c2a 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -170,40 +170,40 @@ static int ghes_estatus_pool_init(void)
 	return 0;
 }
 
-static void ghes_estatus_pool_free_chunk_page(struct gen_pool *pool,
+static void ghes_estatus_pool_free_chunk(struct gen_pool *pool,
 					      struct gen_pool_chunk *chunk,
 					      void *data)
 {
-	free_page(chunk->start_addr);
+	vfree((void *)chunk->start_addr);
 }
 
 static void ghes_estatus_pool_exit(void)
 {
 	gen_pool_for_each_chunk(ghes_estatus_pool,
-				ghes_estatus_pool_free_chunk_page, NULL);
+				ghes_estatus_pool_free_chunk, NULL);
 	gen_pool_destroy(ghes_estatus_pool);
 }
 
 static int ghes_estatus_pool_expand(unsigned long len)
 {
-	unsigned long i, pages, size, addr;
-	int ret;
+	unsigned long size, addr;
 
 	ghes_estatus_pool_size_request += PAGE_ALIGN(len);
 	size = gen_pool_size(ghes_estatus_pool);
 	if (size >= ghes_estatus_pool_size_request)
 		return 0;
-	pages = (ghes_estatus_pool_size_request - size) / PAGE_SIZE;
-	for (i = 0; i < pages; i++) {
-		addr = __get_free_page(GFP_KERNEL);
-		if (!addr)
-			return -ENOMEM;
-		ret = gen_pool_add(ghes_estatus_pool, addr, PAGE_SIZE, -1);
-		if (ret)
-			return ret;
-	}
 
-	return 0;
+	addr = (unsigned long)vmalloc(PAGE_ALIGN(len));
+	if (!addr)
+		return -ENOMEM;
+
+	/*
+	 * New allocation must be visible in all pgd before it can be found by
+	 * an NMI allocating from the pool.
+	 */
+	vmalloc_sync_all();
+
+	return gen_pool_add(ghes_estatus_pool, addr, PAGE_ALIGN(len), -1);
 }
 
 static int map_gen_v2(struct ghes *ghes)
-- 
2.20.1

[PATCH AUTOSEL 4.14 124/127] scsi: libsas: Check SMP PHY control function result

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 01929a65dfa13e18d89264ab1378854a91857e59 ]

Currently the SMP PHY control execution result is checked, however the
function result for the command is not.

As such, we may be missing all potential errors, like SMP FUNCTION FAILED,
INVALID REQUEST FRAME LENGTH, etc., meaning the PHY control request has
failed.

In some scenarios we need to ensure the function result is accepted, so add
a check for this.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 819a655473588..0901ce3c33899 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -614,7 +614,14 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 	}
 
 	res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
-
+	if (res) {
+		pr_err("ex %016llx phy%02d PHY control failed: %d\n",
+		       SAS_ADDR(dev->sas_addr), phy_id, res);
+	} else if (pc_resp[2] != SMP_RESP_FUNC_ACC) {
+		pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n",
+		       SAS_ADDR(dev->sas_addr), phy_id, pc_resp[2]);
+		res = pc_resp[2];
+	}
 	kfree(pc_resp);
 	kfree(pc_req);
 	return res;
-- 
2.20.1

[PATCH AUTOSEL 4.14 125/127] f2fs: fix to data block override node segment by mistake

[Sasha Levin]

From: zhengliang <zhengliang6@huawei.com>

[ Upstream commit a0770e13c8da83bdb64738c0209ab02dd3cfff8b ]

v4: Rearrange the previous three versions.

The following scenario could lead to data block override by mistake.

TASK A            |  TASK kworker                                            |     TASK B                                            |       TASK C
                  |                                                          |                                                       |
open              |                                                          |                                                       |
write             |                                                          |                                                       |
close             |                                                          |                                                       |
                  |  f2fs_write_data_pages                                   |                                                       |
                  |    f2fs_write_cache_pages                                |                                                       |
                  |      f2fs_outplace_write_data                            |                                                       |
                  |        f2fs_allocate_data_block (get block in seg S,     |                                                       |
                  |                                  S is full, and only     |                                                       |
                  |                                  have this valid data    |                                                       |
                  |                                  block)                  |                                                       |
                  |          allocate_segment                                |                                                       |
                  |          locate_dirty_segment (mark S as PRE)            |                                                       |
                  |        f2fs_submit_page_write (submit but is not         |                                                       |
                  |                                written on dev)           |                                                       |
unlink            |                                                          |                                                       |
 iput_final       |                                                          |                                                       |
  f2fs_drop_inode |                                                          |                                                       |
    f2fs_truncate |                                                          |                                                       |
 (not evict)      |                                                          |                                                       |
                  |                                                          | write_checkpoint                                      |
                  |                                                          |  flush merged bio but not wait file data writeback    |
                  |                                                          |  set_prefree_as_free (mark S as FREE)                 |
                  |                                                          |                                                       | update NODE/DATA
                  |                                                          |                                                       | allocate_segment (select S)
                  |     writeback done                                       |                                                       |

So we need to guarantee io complete before truncate inode in f2fs_drop_inode.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 0f3209b23c940..331f16a7c676f 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -668,6 +668,10 @@ static int f2fs_drop_inode(struct inode *inode)
 			sb_start_intwrite(inode->i_sb);
 			f2fs_i_size_write(inode, 0);
 
+			f2fs_submit_merged_write_cond(F2FS_I_SB(inode),
+					inode, NULL, 0, DATA);
+			truncate_inode_pages_final(inode->i_mapping);
+
 			if (F2FS_HAS_BLOCKS(inode))
 				f2fs_truncate(inode);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 126/127] powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property()

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit efa9ace68e487ddd29c2b4d6dd23242158f1f607 ]

In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup().
kstrdup() may return NULL, so it should be checked and handle error.
And prop should be freed if 'prop->name' is NULL.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index f4e6565dd7a94..fb2876a84fbe6 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -63,6 +63,10 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
 
 	name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
 	prop->name = kstrdup(name, GFP_KERNEL);
+	if (!prop->name) {
+		dlpar_free_cc_property(prop);
+		return NULL;
+	}
 
 	prop->length = be32_to_cpu(ccwa->prop_length);
 	value = (char *)ccwa + be32_to_cpu(ccwa->prop_offset);
-- 
2.20.1

[PATCH AUTOSEL 4.14 127/127] mtd: Remove a debug trace in mtdpart.c

[Sasha Levin]

From: Boris Brezillon <bbrezillon@kernel.org>

[ Upstream commit bda2ab56356b9acdfab150f31c4bac9846253092 ]

Commit 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") contained
a leftover of the debug session that led to this bug fix. Remove this
pr_info().

Fixes: 2b6f0090a333 ("mtd: Check add_mtd_device() ret code")
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/mtdpart.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 27d9785487d69..45626b0eed643 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -698,7 +698,6 @@ int mtd_add_partition(struct mtd_info *parent, const char *name,
 	mutex_unlock(&mtd_partitions_mutex);
 
 	free_partition(new);
-	pr_info("%s:%i\n", __func__, __LINE__);
 
 	return ret;
 }
-- 
2.20.1