LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Ming Lei <ming.lei@redhat.com>
To: John Garry <john.garry@huawei.com>
Cc: tglx@linutronix.de, chenxiang66@hisilicon.com,
	bigeasy@linutronix.de, linux-kernel@vger.kernel.org,
	maz@kernel.org, hare@suse.com, hch@lst.de, axboe@kernel.dk,
	bvanassche@acm.org, peterz@infradead.org, mingo@redhat.com
Subject: Re: [PATCH RFC 1/1] genirq: Make threaded handler use irq affinity for managed interrupt
Date: Sat, 7 Dec 2019 16:03:35 +0800
Message-ID: <20191207080335.GA6077@ming.t460p> (raw)
In-Reply-To: <1575642904-58295-2-git-send-email-john.garry@huawei.com>

On Fri, Dec 06, 2019 at 10:35:04PM +0800, John Garry wrote:
> Currently the cpu allowed mask for the threaded part of a threaded irq
> handler will be set to the effective affinity of the hard irq.
> 
> Typically the effective affinity of the hard irq will be for a single cpu. As such,
> the threaded handler would always run on the same cpu as the hard irq.
> 
> We have seen scenarios in high data-rate throughput testing that the cpu
> handling the interrupt can be totally saturated handling both the hard
> interrupt and threaded handler parts, limiting throughput.

Frankly speaking, I never observed that single CPU is saturated by one storage
completion queue's interrupt load. Because CPU is still much quicker than
current storage device. 

If there are more drives, one CPU won't handle more than one queue(drive)'s
interrupt if (nr_drive * nr_hw_queues) < nr_cpu_cores.

So could you describe your case in a bit detail? Then we can confirm
if this change is really needed.

> 
> For when the interrupt is managed, allow the threaded part to run on all
> cpus in the irq affinity mask.

I remembered that performance drop is observed by this approach in some
test.


Thanks, 
Ming


  parent reply index

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-06 14:35 [PATCH RFC 0/1] Threaded handler uses irq affinity for when the interrupt is managed John Garry
2019-12-06 14:35 ` [PATCH RFC 1/1] genirq: Make threaded handler use irq affinity for managed interrupt John Garry
2019-12-06 15:22   ` Marc Zyngier
2019-12-06 16:16     ` John Garry
2019-12-07  8:03   ` Ming Lei [this message]
2019-12-09 14:30     ` John Garry
2019-12-09 15:09       ` Hannes Reinecke
2019-12-09 15:17         ` Marc Zyngier
2019-12-09 15:25           ` Hannes Reinecke
2019-12-09 15:36             ` Marc Zyngier
2019-12-09 15:49           ` Qais Yousef
2019-12-09 15:55             ` Marc Zyngier
2019-12-10  1:43       ` Ming Lei
2019-12-10  9:45         ` John Garry
2019-12-10 10:06           ` Ming Lei
2019-12-10 10:28           ` Marc Zyngier
2019-12-10 10:59             ` John Garry
2019-12-10 11:36               ` Marc Zyngier
2019-12-10 12:05                 ` John Garry
2019-12-10 18:32                   ` Marc Zyngier
2019-12-11  9:41                     ` John Garry
2019-12-13 10:07                       ` John Garry
2019-12-13 10:31                         ` Marc Zyngier
2019-12-13 12:08                           ` John Garry
2019-12-14 10:59                             ` Marc Zyngier
2019-12-11 17:09         ` John Garry
2019-12-12 22:38           ` Ming Lei
2019-12-13 11:12             ` John Garry
2019-12-13 13:18               ` Ming Lei
2019-12-13 15:43                 ` John Garry
2019-12-13 17:12                   ` Ming Lei
2019-12-13 17:50                     ` John Garry
2019-12-14 13:56                   ` Marc Zyngier
2019-12-16 10:47                     ` John Garry
2019-12-16 11:40                       ` Marc Zyngier
2019-12-16 14:17                         ` John Garry
2019-12-16 18:00                           ` Marc Zyngier
2019-12-16 18:50                             ` John Garry
2019-12-20 11:30                               ` John Garry
2019-12-20 14:43                                 ` Marc Zyngier
2019-12-20 15:38                                   ` John Garry
2019-12-20 16:16                                     ` Marc Zyngier
2019-12-20 23:31                                     ` Ming Lei
2019-12-23  9:07                                       ` Marc Zyngier
2019-12-23 10:26                                         ` John Garry
2019-12-23 10:47                                           ` Marc Zyngier
2019-12-23 11:35                                             ` John Garry
2019-12-24  1:59                                             ` Ming Lei
2019-12-24 11:20                                               ` Marc Zyngier
2019-12-25  0:48                                                 ` Ming Lei
2020-01-02 10:35                                                   ` John Garry
2020-01-03  0:46                                                     ` Ming Lei
2020-01-03 10:41                                                       ` John Garry
2020-01-03 11:29                                                         ` Ming Lei
2020-01-03 11:50                                                           ` John Garry
2020-01-04 12:03                                                             ` Ming Lei
2020-05-30  7:46 ` [tip: irq/core] irqchip/gic-v3-its: Balance initial LPI affinity across CPUs tip-bot2 for Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191207080335.GA6077@ming.t460p \
    --to=ming.lei@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=bigeasy@linutronix.de \
    --cc=bvanassche@acm.org \
    --cc=chenxiang66@hisilicon.com \
    --cc=hare@suse.com \
    --cc=hch@lst.de \
    --cc=john.garry@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git