From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Kamil Konieczny <k.konieczny@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Andreas Faerber <afaerber@suse.de>,
Arjun K V <arjun.kv@samsung.com>
Subject: [PATCH 1/2] ARM: dts: exynos: Add initial data for coupled regulators for Exynos5422/5800
Date: Tue, 10 Dec 2019 12:40:26 +0100 [thread overview]
Message-ID: <20191210114027.14910-2-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20191210114027.14910-1-m.szyprowski@samsung.com>
Declare Exynos5422/5800 voltage ranges for opp points for big cpu core and
bus wcore and couple their voltage supllies as vdd_arm and vdd_int should
be in 300mV range.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.konieczny: add missing patch description]
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
This patch is the same as https://patchwork.kernel.org/patch/11172427/
which has been dropped due to the other issues in the regulator framework.
Those issues has been resolved now, so it is safe to apply it.
---
arch/arm/boot/dts/exynos5420.dtsi | 34 +++++++++----------
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +++
arch/arm/boot/dts/exynos5800.dtsi | 32 ++++++++---------
4 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d39907a41f78..1ae5211f7d79 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -48,62 +48,62 @@
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
clock-latency-ns = <140000>;
};
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
- opp-microvolt = <1212500>;
+ opp-microvolt = <1212500 1212500 1500000>;
clock-latency-ns = <140000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <1175000>;
+ opp-microvolt = <1175000 1175000 1500000>;
clock-latency-ns = <140000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1137500>;
+ opp-microvolt = <1137500 1137500 1500000>;
clock-latency-ns = <140000>;
};
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1112500>;
+ opp-microvolt = <1112500 1112500 1500000>;
clock-latency-ns = <140000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1062500>;
+ opp-microvolt = <1062500 1062500 1500000>;
clock-latency-ns = <140000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1037500>;
+ opp-microvolt = <1037500 1037500 1500000>;
clock-latency-ns = <140000>;
};
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1012500>;
+ opp-microvolt = <1012500 1012500 1500000>;
clock-latency-ns = <140000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = < 987500>;
+ opp-microvolt = < 987500 987500 1500000>;
clock-latency-ns = <140000>;
};
opp-900000000 {
opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = < 962500>;
+ opp-microvolt = < 962500 962500 1500000>;
clock-latency-ns = <140000>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = < 937500>;
+ opp-microvolt = < 937500 937500 1500000>;
clock-latency-ns = <140000>;
};
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = < 912500>;
+ opp-microvolt = < 912500 912500 1500000>;
clock-latency-ns = <140000>;
};
};
@@ -1171,23 +1171,23 @@
opp00 {
opp-hz = /bits/ 64 <84000000>;
- opp-microvolt = <925000>;
+ opp-microvolt = <925000 925000 1400000>;
};
opp01 {
opp-hz = /bits/ 64 <111000000>;
- opp-microvolt = <950000>;
+ opp-microvolt = <950000 950000 1400000>;
};
opp02 {
opp-hz = /bits/ 64 <222000000>;
- opp-microvolt = <950000>;
+ opp-microvolt = <950000 950000 1400000>;
};
opp03 {
opp-hz = /bits/ 64 <333000000>;
- opp-microvolt = <950000>;
+ opp-microvolt = <950000 950000 1400000>;
};
opp04 {
opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <987500>;
+ opp-microvolt = <987500 987500 1400000>;
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 059fa32d1a8f..8a34a861c191 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -601,6 +601,8 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -613,6 +615,8 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ca3d685247..c1e38139ce4f 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -257,6 +257,8 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -269,6 +271,8 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&buck2_reg>;
+ regulator-coupled-max-spread = <300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 16177d815ee4..1be7eb60439a 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -22,61 +22,61 @@
&cluster_a15_opp_table {
opp-1700000000 {
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
};
opp-1600000000 {
- opp-microvolt = <1250000>;
+ opp-microvolt = <1250000 1250000 1500000>;
};
opp-1500000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1400000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1300000000 {
- opp-microvolt = <1100000>;
+ opp-microvolt = <1100000 1100000 1500000>;
};
opp-1200000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-1100000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-1000000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-900000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <1000000 1000000 1500000>;
};
opp-800000000 {
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
};
opp-700000000 {
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <900000 900000 1500000>;
clock-latency-ns = <140000>;
};
};
--
2.17.1
next prev parent reply other threads:[~2019-12-10 11:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20191210114035eucas1p213dc81b3934969baf2bb9235d5ab8d28@eucas1p2.samsung.com>
2019-12-10 11:40 ` [PATCH 0/2] Increase CPU frequency in Exynos5422/5800 SoCs Marek Szyprowski
[not found] ` <CGME20191210114036eucas1p2b0205a5dcdf1f26485235a232a5cbf20@eucas1p2.samsung.com>
2019-12-10 11:40 ` Marek Szyprowski [this message]
[not found] ` <CGME20191210114036eucas1p2fe31f68148688632d983e27bed12e7d8@eucas1p2.samsung.com>
2019-12-10 11:40 ` [PATCH 2/2] ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800 Marek Szyprowski
2019-12-11 18:20 ` [PATCH 0/2] Increase CPU frequency in Exynos5422/5800 SoCs Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210114027.14910-2-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=afaerber@suse.de \
--cc=arjun.kv@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=dianders@chromium.org \
--cc=k.konieczny@samsung.com \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).