[PATCH AUTOSEL 4.14 001/130] drm: mst: Fix query_payload ack reply struct

[PATCH AUTOSEL 4.14 001/130] drm: mst: Fix query_payload ack reply struct

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ]

Spec says[1] Allocated_PBN is 16 bits

[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_dp_mst_helper.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index d55abb75f29ae..eec6cba204ea8 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -313,7 +313,7 @@ struct drm_dp_resource_status_notify {
 
 struct drm_dp_query_payload_ack_reply {
 	u8 port_number;
-	u8 allocated_pbn;
+	u16 allocated_pbn;
 };
 
 struct drm_dp_sideband_msg_req_body {
-- 
2.20.1

[PATCH AUTOSEL 4.14 002/130] drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]

Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 9385eb0b1ee40..cd2bfd7bf048e 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -725,7 +725,9 @@ static int anx78xx_init_pdata(struct anx78xx *anx78xx)
 	/* 1.0V digital core power regulator  */
 	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
 	if (IS_ERR(pdata->dvdd10)) {
-		DRM_ERROR("DVDD10 regulator not found\n");
+		if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+			DRM_ERROR("DVDD10 regulator not found\n");
+
 		return PTR_ERR(pdata->dvdd10);
 	}
 
@@ -1344,7 +1346,9 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
 
 	err = anx78xx_init_pdata(anx78xx);
 	if (err) {
-		DRM_ERROR("Failed to initialize pdata: %d\n", err);
+		if (err != -EPROBE_DEFER)
+			DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
 		return err;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 003/130] iio: light: bh1750: Resolve compiler warning and make code more readable

[Sasha Levin]

From: Krzysztof Wilczynski <kw@linux.com>

[ Upstream commit f552fde983d378e7339f9ea74a25f918563bf0d3 ]

Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.

This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):

drivers/iio/light/bh1750.c:64:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]

Related to commit 3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").

Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/light/bh1750.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 6c61187e630fd..0b7ba02c8d166 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -62,9 +62,9 @@ struct bh1750_chip_info {
 
 	u16 int_time_low_mask;
 	u16 int_time_high_mask;
-}
+};
 
-static const bh1750_chip_info_tbl[] = {
+static const struct bh1750_chip_info bh1750_chip_info_tbl[] = {
 	[BH1710] = { 140, 1022, 300, 400,  250000000, 2, 0x001F, 0x03E0 },
 	[BH1721] = { 140, 1020, 300, 400,  250000000, 2, 0x0010, 0x03E0 },
 	[BH1750] = { 31,  254,  69,  1740, 57500000,  1, 0x001F, 0x00E0 },
-- 
2.20.1

[PATCH AUTOSEL 4.14 004/130] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 0fe2f2b789190661df24bb8bf62294145729a1fe ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

The driver was slightly reworked. The preenable hook was moved to the
postenable, to add some symmetry to the postenable/predisable part.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/light/tcs3414.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index a795afb7667bd..b5a35c7b6b7f4 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -244,32 +244,42 @@ static const struct iio_info tcs3414_info = {
 	.driver_module = THIS_MODULE,
 };
 
-static int tcs3414_buffer_preenable(struct iio_dev *indio_dev)
+static int tcs3414_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct tcs3414_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
 
 	data->control |= TCS3414_CONTROL_ADC_EN;
-	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
 		data->control);
+	if (ret)
+		iio_triggered_buffer_predisable(indio_dev);
+
+	return ret;
 }
 
 static int tcs3414_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct tcs3414_data *data = iio_priv(indio_dev);
-	int ret;
-
-	ret = iio_triggered_buffer_predisable(indio_dev);
-	if (ret < 0)
-		return ret;
+	int ret, ret2;
 
 	data->control &= ~TCS3414_CONTROL_ADC_EN;
-	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
 		data->control);
+
+	ret2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!ret)
+		ret = ret2;
+
+	return ret;
 }
 
 static const struct iio_buffer_setup_ops tcs3414_buffer_setup_ops = {
-	.preenable = tcs3414_buffer_preenable,
-	.postenable = &iio_triggered_buffer_postenable,
+	.postenable = tcs3414_buffer_postenable,
 	.predisable = tcs3414_buffer_predisable,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 005/130] spi: Add call to spi_slave_abort() function when spidev driver is released

[Sasha Levin]

From: Lukasz Majewski <lukma@denx.de>

[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]

This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).

When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.

This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index c5fe08bc34a0a..028725573e632 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -634,6 +634,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
 		if (dofree)
 			kfree(spidev);
 	}
+#ifdef CONFIG_SPI_SLAVE
+	spi_slave_abort(spidev->spi);
+#endif
 	mutex_unlock(&device_list_lock);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 006/130] staging: rtl8192u: fix multiple memory leaks on error path

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit ca312438cf176a16d4b89350cade8789ba8d7133 ]

In rtl8192_tx on error handling path allocated urbs and also skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190920025137.29407-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index db3eb7ec5809d..fbbd1b59dc11d 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1506,7 +1506,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		(tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
 	struct usb_device *udev = priv->udev;
 	int pend;
-	int status;
+	int status, rt = -1;
 	struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
 	unsigned int idx_pipe;
 
@@ -1650,8 +1650,10 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		}
 		if (bSend0Byte) {
 			tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
-			if (!tx_urb_zero)
-				return -ENOMEM;
+			if (!tx_urb_zero) {
+				rt = -ENOMEM;
+				goto error;
+			}
 			usb_fill_bulk_urb(tx_urb_zero, udev,
 					  usb_sndbulkpipe(udev, idx_pipe),
 					  &zero, 0, tx_zero_isr, dev);
@@ -1661,7 +1663,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 					 "Error TX URB for zero byte %d, error %d",
 					 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 					 status);
-				return -1;
+				goto error;
 			}
 		}
 		netif_trans_update(dev);
@@ -1672,7 +1674,12 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 	RT_TRACE(COMP_ERR, "Error TX URB %d, error %d",
 		 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 		 status);
-	return -1;
+
+error:
+	dev_kfree_skb_any(skb);
+	usb_free_urb(tx_urb);
+	usb_free_urb(tx_urb_zero);
+	return rt;
 }
 
 static short rtl8192_usb_initendpoints(struct net_device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.14 007/130] staging: rtl8188eu: fix possible null dereference

[Sasha Levin]

From: Connor Kuehl <connor.kuehl@canonical.com>

[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]

Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.

Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.

Addresses-Coverity: ("Dereference null return value")

Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 904b988ecc4ee..7c895af1ba31c 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -805,7 +805,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN);
 			memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
 			   check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
@@ -813,7 +813,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
 			memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else {
 			RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));
-- 
2.20.1

[PATCH AUTOSEL 4.14 008/130] objtool: add kunit_try_catch_throw to the noreturn list

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]

Fix the following warning seen on GCC 7.3:
  kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

kunit_try_catch_throw is a function added in the following patch in this
series; it allows KUnit, a unit testing framework for the kernel, to
bail out of a broken test. As a consequence, it is a new __noreturn
function that objtool thinks is broken (as seen above). So fix this
warning by adding kunit_try_catch_throw to objtool's noreturn list.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 5422543faff85..daf178bc46446 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -167,6 +167,7 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func,
 		"fortify_panic",
 		"machine_real_restart",
 		"rewind_stack_do_exit",
+		"kunit_try_catch_throw",
 	};
 
 	if (func->bind == STB_WEAK)
-- 
2.20.1

[PATCH AUTOSEL 4.14 009/130] rtlwifi: prevent memory leak in rtl_usb_probe

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 2401c8bdb211e..93eda23f01239 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1068,8 +1068,10 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->hw = hw;
 	rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32),
 				    GFP_KERNEL);
-	if (!rtlpriv->usb_data)
+	if (!rtlpriv->usb_data) {
+		ieee80211_free_hw(hw);
 		return -ENOMEM;
+	}
 
 	/* this spin lock must be initialized early */
 	spin_lock_init(&rtlpriv->locks.usb_lock);
@@ -1130,6 +1132,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
+	kfree(rtlpriv->usb_data);
 	return -ENODEV;
 }
 EXPORT_SYMBOL(rtl_usb_probe);
-- 
2.20.1

[PATCH AUTOSEL 4.14 010/130] libertas: fix a potential NULL pointer dereference

[Sasha Levin]

From: Allen Pais <allen.pais@oracle.com>

[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ]

alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.

Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/if_sdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c
index 39bf85d0ade0e..c7f8a29d2606b 100644
--- a/drivers/net/wireless/marvell/libertas/if_sdio.c
+++ b/drivers/net/wireless/marvell/libertas/if_sdio.c
@@ -1183,6 +1183,10 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	spin_lock_init(&card->lock);
 	card->workqueue = alloc_workqueue("libertas_sdio", WQ_MEM_RECLAIM, 0);
+	if (unlikely(!card->workqueue)) {
+		ret = -ENOMEM;
+		goto err_queue;
+	}
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
 	init_waitqueue_head(&card->pwron_waitq);
 
@@ -1234,6 +1238,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	lbs_remove_card(priv);
 free:
 	destroy_workqueue(card->workqueue);
+err_queue:
 	while (card->packets) {
 		packet = card->packets;
 		card->packets = card->packets->next;
-- 
2.20.1

[PATCH AUTOSEL 4.14 011/130] IB/iser: bound protection_sg size by data_sg size

[Sasha Levin]

From: Max Gurtovoy <maxg@mellanox.com>

[ Upstream commit 7718cf03c3ce4b6ebd90107643ccd01c952a1fce ]

In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.

Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/iser/iscsi_iser.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 19624e023ebd9..b5a789567b4ed 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -648,6 +648,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
 		if (ib_conn->pi_support) {
 			u32 sig_caps = ib_conn->device->ib_device->attrs.sig_prot_cap;
 
+			shost->sg_prot_tablesize = shost->sg_tablesize;
 			scsi_host_set_prot(shost, iser_dif_prot_caps(sig_caps));
 			scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP |
 						   SHOST_DIX_GUARD_CRC);
-- 
2.20.1

[PATCH AUTOSEL 4.14 012/130] media: am437x-vpfe: Setting STD to current value is not an error

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 13aa21cfe92ce9ebb51824029d89f19c33f81419 ]

VIDIOC_S_STD should not return an error if the value is identical
to the current one.
This error was highlighted by the v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/am437x/am437x-vpfe.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index dfcc484cab898..e92c5b56be422 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -1848,6 +1848,10 @@ static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
 	if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
 		return -ENODATA;
 
+	/* if trying to set the same std then nothing to do */
+	if (vpfe_standards[vpfe->std_index].std_id == std_id)
+		return 0;
+
 	/* If streaming is started, return error */
 	if (vb2_is_busy(&vpfe->buffer_queue)) {
 		vpfe_err(vpfe, "%s device busy\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 4.14 013/130] media: i2c: ov2659: fix s_stream return value

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 85c4043f1d403c222d481dfc91846227d66663fb ]

In ov2659_s_stream() return value for invoked function should be checked
and propagated.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2659.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index ce23f436e130d..04d493aea45eb 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1203,11 +1203,15 @@ static int ov2659_s_stream(struct v4l2_subdev *sd, int on)
 		goto unlock;
 	}
 
-	ov2659_set_pixel_clock(ov2659);
-	ov2659_set_frame_size(ov2659);
-	ov2659_set_format(ov2659);
-	ov2659_set_streaming(ov2659, 1);
-	ov2659->streaming = on;
+	ret = ov2659_set_pixel_clock(ov2659);
+	if (!ret)
+		ret = ov2659_set_frame_size(ov2659);
+	if (!ret)
+		ret = ov2659_set_format(ov2659);
+	if (!ret) {
+		ov2659_set_streaming(ov2659, 1);
+		ov2659->streaming = on;
+	}
 
 unlock:
 	mutex_unlock(&ov2659->lock);
-- 
2.20.1

[PATCH AUTOSEL 4.14 014/130] media: ov6650: Fix crop rectangle alignment not passed back

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit 7b188d6ba27a131e7934a51a14ece331c0491f18 ]

Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const")
introduced a writable copy of constified user requested crop rectangle
in order to be able to perform hardware alignments on it.  Later
on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video
ops") replaced s_crop() video operation using that const argument with
set_selection() pad operation which had a corresponding argument not
constified, however the original behavior of the driver was not
restored.  Since that time, any hardware alignment applied on a user
requested crop rectangle is not passed back to the user calling
.set_selection() as it should be.

Fix the issue by dropping the copy and replacing all references to it
with references to the crop rectangle embedded in the user argument.

Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov6650.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 025869eec2ac9..98080d4204445 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -469,38 +469,37 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov6650 *priv = to_ov6650(client);
-	struct v4l2_rect rect = sel->r;
 	int ret;
 
 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
 	    sel->target != V4L2_SEL_TGT_CROP)
 		return -EINVAL;
 
-	v4l_bound_align_image(&rect.width, 2, W_CIF, 1,
-			      &rect.height, 2, H_CIF, 1, 0);
-	v4l_bound_align_image(&rect.left, DEF_HSTRT << 1,
-			      (DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1,
-			      &rect.top, DEF_VSTRT << 1,
-			      (DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1,
-			      0);
+	v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
+			      &sel->r.height, 2, H_CIF, 1, 0);
+	v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
+			      (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
+			      &sel->r.top, DEF_VSTRT << 1,
+			      (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
+			      1, 0);
 
-	ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1);
+	ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
 	if (!ret) {
-		priv->rect.left = rect.left;
+		priv->rect.left = sel->r.left;
 		ret = ov6650_reg_write(client, REG_HSTOP,
-				(rect.left + rect.width) >> 1);
+				       (sel->r.left + sel->r.width) >> 1);
 	}
 	if (!ret) {
-		priv->rect.width = rect.width;
-		ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1);
+		priv->rect.width = sel->r.width;
+		ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
 	}
 	if (!ret) {
-		priv->rect.top = rect.top;
+		priv->rect.top = sel->r.top;
 		ret = ov6650_reg_write(client, REG_VSTOP,
-				(rect.top + rect.height) >> 1);
+				       (sel->r.top + sel->r.height) >> 1);
 	}
 	if (!ret)
-		priv->rect.height = rect.height;
+		priv->rect.height = sel->r.height;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 015/130] media: i2c: ov2659: Fix missing 720p register config

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 9d669fbfca20e6035ead814e55d9ef1a6b500540 ]

The initial registers sequence is only loaded at probe
time. Afterward only the resolution and format specific
register are modified. Care must be taken to make sure
registers modified by one resolution setting are reverted
back when another resolution is programmed.

This was not done properly for the 720p case.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2659.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 04d493aea45eb..44b0584eb8a6c 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -419,10 +419,14 @@ static struct sensor_register ov2659_720p[] = {
 	{ REG_TIMING_YINC, 0x11 },
 	{ REG_TIMING_VERT_FORMAT, 0x80 },
 	{ REG_TIMING_HORIZ_FORMAT, 0x00 },
+	{ 0x370a, 0x12 },
 	{ 0x3a03, 0xe8 },
 	{ 0x3a09, 0x6f },
 	{ 0x3a0b, 0x5d },
 	{ 0x3a15, 0x9a },
+	{ REG_VFIFO_READ_START_H, 0x00 },
+	{ REG_VFIFO_READ_START_L, 0x80 },
+	{ REG_ISP_CTRL02, 0x00 },
 	{ REG_NULL, 0x00 },
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 016/130] media: ov6650: Fix stored frame format not in sync with hardware

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit 3143b459de4cdcce67b36827476c966e93c1cf01 ]

The driver stores frame format settings supposed to be in line with
hardware state in a device private structure.  Since the driver initial
submission, those settings are updated before they are actually applied
on hardware.  If an error occurs on device update, the stored settings
my not reflect hardware state anymore and consecutive calls to
.get_fmt() may return incorrect information.  That in turn may affect
ability of a bridge device to use correct DMA transfer settings if such
incorrect informmation on active frame format returned by .get_fmt() is
used.

Assuming a failed device update means its state hasn't changed, update
frame format related settings stored in the device private structure
only after they are successfully applied so the stored values always
reflect hardware state as closely as possible.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov6650.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 98080d4204445..81fa21ed25992 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -613,7 +613,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
 		return -EINVAL;
 	}
-	priv->code = code;
 
 	if (code == MEDIA_BUS_FMT_Y8_1X8 ||
 			code == MEDIA_BUS_FMT_SBGGR8_1X8) {
@@ -639,7 +638,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		dev_dbg(&client->dev, "max resolution: CIF\n");
 		coma_mask |= COMA_QCIF;
 	}
-	priv->half_scale = half_scale;
 
 	clkrc = CLKRC_12MHz;
 	mclk = 12000000;
@@ -657,8 +655,13 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
 	if (!ret)
 		ret = ov6650_reg_write(client, REG_CLKRC, clkrc);
-	if (!ret)
+	if (!ret) {
+		priv->half_scale = half_scale;
+
 		ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask);
+	}
+	if (!ret)
+		priv->code = code;
 
 	if (!ret) {
 		mf->colorspace	= priv->colorspace;
-- 
2.20.1

[PATCH AUTOSEL 4.14 017/130] media: ov6650: Fix stored crop rectangle not in sync with hardware

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit 1463b371aff0682c70141f7521db13cc4bbf3016 ]

The driver stores crop rectangle settings supposed to be in line with
hardware state in a device private structure.  Since the driver initial
submission, crop rectangle width and height settings are not updated
correctly when rectangle offset settings are applied on hardware.  If
an error occurs while the device is updated, the stored settings my no
longer reflect hardware state and consecutive calls to .get_selection()
as well as .get/set_fmt() may return incorrect information.  That in
turn may affect ability of a bridge device to use correct DMA transfer
settings if such incorrect informamtion on active frame format returned
by .get/set_fmt() is used.

Assuming a failed update of the device means its actual settings haven't
changed, update crop rectangle width and height settings stored in the
device private structure correctly while the rectangle offset is
successfully applied on hardware so the stored values always reflect
actual hardware state to the extent possible.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov6650.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 81fa21ed25992..348296be49258 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -485,6 +485,7 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
 
 	ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
 	if (!ret) {
+		priv->rect.width += priv->rect.left - sel->r.left;
 		priv->rect.left = sel->r.left;
 		ret = ov6650_reg_write(client, REG_HSTOP,
 				       (sel->r.left + sel->r.width) >> 1);
@@ -494,6 +495,7 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
 		ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
 	}
 	if (!ret) {
+		priv->rect.height += priv->rect.top - sel->r.top;
 		priv->rect.top = sel->r.top;
 		ret = ov6650_reg_write(client, REG_VSTOP,
 				       (sel->r.top + sel->r.height) >> 1);
-- 
2.20.1

[PATCH AUTOSEL 4.14 018/130] tools/power/cpupower: Fix initializer override in hsw_ext_cstates

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ]

When building cpupower with clang, the following warning appears:

 utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
 prior initialization of this subobject [-Winitializer-overrides]
                 .desc                   = N_("Processor Package C2"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                              ^~~~~~
 utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
 is here
                 .desc                   = N_("Processor Package C9"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                             ^~~~~~
 1 warning generated.

This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.

Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
index f794d6bbb7e9f..3e4ff4a1cdf4b 100644
--- a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
@@ -40,7 +40,6 @@ static cstate_t hsw_ext_cstates[HSW_EXT_CSTATE_COUNT] = {
 	{
 		.name			= "PC9",
 		.desc			= N_("Processor Package C9"),
-		.desc			= N_("Processor Package C2"),
 		.id			= PC9,
 		.range			= RANGE_PACKAGE,
 		.get_count_percent	= hsw_ext_get_count_percent,
-- 
2.20.1

[PATCH AUTOSEL 4.14 019/130] media: venus: core: Fix msm8996 frequency table

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit c690435ed07901737e5c007a65ec59f53b33eb71 ]

In downstream driver, there are two frequency tables defined,
one for the encoder and one for the decoder:

/* Encoders /
<972000 490000000 0x55555555>, / 4k UHD @ 30 /
<489600 320000000 0x55555555>, / 1080p @ 60 /
<244800 150000000 0x55555555>, / 1080p @ 30 /
<108000 75000000 0x55555555>, / 720p @ 30 */

/* Decoders /
<1944000 490000000 0xffffffff>, / 4k UHD @ 60 /
< 972000 320000000 0xffffffff>, / 4k UHD @ 30 /
< 489600 150000000 0xffffffff>, / 1080p @ 60 /
< 244800 75000000 0xffffffff>; / 1080p @ 30 */

It shows that encoder always needs a higher clock than decoder.

In current venus driver, the unified frequency table is aligned
with the downstream decoder table which causes performance issues
in encoding scenarios. Fix that by aligning frequency table on
worst case (encoding).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 769e9e68562df..9360b36b82cd8 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -345,10 +345,11 @@ static const struct venus_resources msm8916_res = {
 };
 
 static const struct freq_tbl msm8996_freq_table[] = {
-	{ 1944000, 490000000 },	/* 4k UHD @ 60 */
-	{  972000, 320000000 },	/* 4k UHD @ 30 */
-	{  489600, 150000000 },	/* 1080p @ 60 */
-	{  244800,  75000000 },	/* 1080p @ 30 */
+	{ 1944000, 520000000 },	/* 4k UHD @ 60 (decode only) */
+	{  972000, 520000000 },	/* 4k UHD @ 30 */
+	{  489600, 346666667 },	/* 1080p @ 60 */
+	{  244800, 150000000 },	/* 1080p @ 30 */
+	{  108000,  75000000 },	/* 720p @ 30 */
 };
 
 static const struct reg_val msm8996_reg_preset[] = {
-- 
2.20.1

[PATCH AUTOSEL 4.14 020/130] ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit cc6df017e55764ffef9819dd9554053182535ffd ]

Offchannel management frames were failing:

[18099.253732] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780
[18102.293686] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780
[18105.333653] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780
[18108.373712] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780
[18111.413687] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0
[18114.453726] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00
[18117.493773] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0
[18120.533631] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00

This bug appears to have been added between 4.0 (which works for us),
and 4.4, which does not work.

I think this is because the tx-offchannel logic gets in a loop when
ath10k_mac_tx_frm_has_freq(ar) is false, so pkt is never actually
sent to the firmware for transmit.

This patch fixes the problem on 4.9 for me, and now HS20 clients
can work again with my firmware.

Antonio: tested with 10.4-3.5.3-00057 on QCA4019 and QCA9888

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Antonio Quartulli <antonio.quartulli@kaiwoo.ai>
[kvalo@codeaurora.org: improve commit log, remove unneeded parenthesis]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index dff34448588f0..ea47ad4b2343b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3627,7 +3627,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
 			 struct ieee80211_vif *vif,
 			 enum ath10k_hw_txrx_mode txmode,
 			 enum ath10k_mac_tx_path txpath,
-			 struct sk_buff *skb)
+			 struct sk_buff *skb, bool noque_offchan)
 {
 	struct ieee80211_hw *hw = ar->hw;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -3655,10 +3655,10 @@ static int ath10k_mac_tx(struct ath10k *ar,
 		}
 	}
 
-	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+	if (!noque_offchan && info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
 		if (!ath10k_mac_tx_frm_has_freq(ar)) {
-			ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n",
-				   skb);
+			ath10k_dbg(ar, ATH10K_DBG_MAC, "mac queued offchannel skb %pK len %d\n",
+				   skb, skb->len);
 
 			skb_queue_tail(&ar->offchan_tx_queue, skb);
 			ieee80211_queue_work(hw, &ar->offchan_tx_work);
@@ -3720,8 +3720,8 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 
 		mutex_lock(&ar->conf_mutex);
 
-		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n",
-			   skb);
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK len %d\n",
+			   skb, skb->len);
 
 		hdr = (struct ieee80211_hdr *)skb->data;
 		peer_addr = ieee80211_get_DA(hdr);
@@ -3767,7 +3767,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb);
 		txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);
 
-		ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
+		ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, true);
 		if (ret) {
 			ath10k_warn(ar, "failed to transmit offchannel frame: %d\n",
 				    ret);
@@ -3777,8 +3777,8 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		time_left =
 		wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ);
 		if (time_left == 0)
-			ath10k_warn(ar, "timed out waiting for offchannel skb %pK\n",
-				    skb);
+			ath10k_warn(ar, "timed out waiting for offchannel skb %pK, len: %d\n",
+				    skb, skb->len);
 
 		if (!peer && tmp_peer_created) {
 			ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
@@ -3957,7 +3957,7 @@ int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw,
 		spin_unlock_bh(&ar->htt.tx_lock);
 	}
 
-	ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
+	ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, false);
 	if (unlikely(ret)) {
 		ath10k_warn(ar, "failed to push frame: %d\n", ret);
 
@@ -4239,7 +4239,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 		spin_unlock_bh(&ar->htt.tx_lock);
 	}
 
-	ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb);
+	ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, false);
 	if (ret) {
 		ath10k_warn(ar, "failed to transmit frame: %d\n", ret);
 		if (is_htt) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 021/130] pinctrl: devicetree: Avoid taking direct reference to device name string

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit be4c60b563edee3712d392aaeb0943a768df7023 ]

When populating the pinctrl mapping table entries for a device, the
'dev_name' field for each entry is initialised to point directly at the
string returned by 'dev_name()' for the device and subsequently used by
'create_pinctrl()' when looking up the mappings for the device being
probed.

This is unreliable in the presence of calls to 'dev_set_name()', which may
reallocate the device name string leaving the pinctrl mappings with a
dangling reference. This then leads to a use-after-free every time the
name is dereferenced by a device probe:

  | BUG: KASAN: invalid-access in strcmp+0x20/0x64
  | Read of size 1 at addr 13ffffc153494b00 by task modprobe/590
  | Pointer tag: [13], memory tag: [fe]
  |
  | Call trace:
  |  __kasan_report+0x16c/0x1dc
  |  kasan_report+0x10/0x18
  |  check_memory_region
  |  __hwasan_load1_noabort+0x4c/0x54
  |  strcmp+0x20/0x64
  |  create_pinctrl+0x18c/0x7f4
  |  pinctrl_get+0x90/0x114
  |  devm_pinctrl_get+0x44/0x98
  |  pinctrl_bind_pins+0x5c/0x450
  |  really_probe+0x1c8/0x9a4
  |  driver_probe_device+0x120/0x1d8

Follow the example of sysfs, and duplicate the device name string before
stashing it away in the pinctrl mapping entries.

Cc: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Elena Petrova <lenaptr@google.com>
Tested-by: Elena Petrova <lenaptr@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191002124206.22928-1-will@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/devicetree.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index c4aa411f5935b..3a7c2d6e4d5f6 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -40,6 +40,13 @@ struct pinctrl_dt_map {
 static void dt_free_map(struct pinctrl_dev *pctldev,
 		     struct pinctrl_map *map, unsigned num_maps)
 {
+	int i;
+
+	for (i = 0; i < num_maps; ++i) {
+		kfree_const(map[i].dev_name);
+		map[i].dev_name = NULL;
+	}
+
 	if (pctldev) {
 		const struct pinctrl_ops *ops = pctldev->desc->pctlops;
 		if (ops->dt_free_map)
@@ -74,7 +81,13 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
 
 	/* Initialize common mapping table entry fields */
 	for (i = 0; i < num_maps; i++) {
-		map[i].dev_name = dev_name(p->dev);
+		const char *devname;
+
+		devname = kstrdup_const(dev_name(p->dev), GFP_KERNEL);
+		if (!devname)
+			goto err_free_map;
+
+		map[i].dev_name = devname;
 		map[i].name = statename;
 		if (pctldev)
 			map[i].ctrl_dev_name = dev_name(pctldev->dev);
@@ -82,10 +95,8 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
 
 	/* Remember the converted mapping table entries */
 	dt_map = kzalloc(sizeof(*dt_map), GFP_KERNEL);
-	if (!dt_map) {
-		dt_free_map(pctldev, map, num_maps);
-		return -ENOMEM;
-	}
+	if (!dt_map)
+		goto err_free_map;
 
 	dt_map->pctldev = pctldev;
 	dt_map->map = map;
@@ -93,6 +104,10 @@ static int dt_remember_or_free_map(struct pinctrl *p, const char *statename,
 	list_add_tail(&dt_map->node, &p->dt_maps);
 
 	return pinctrl_register_map(map, num_maps, false);
+
+err_free_map:
+	dt_free_map(pctldev, map, num_maps);
+	return -ENOMEM;
 }
 
 struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
-- 
2.20.1

[PATCH AUTOSEL 4.14 022/130] selftests/bpf: Correct path to include msg + path

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit c588146378962786ddeec817f7736a53298a7b01 ]

The "path" buf is supposed to contain path + printf msg up to 24 bytes.
It will be cut anyway, but compiler generates truncation warns like:

"
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c: In
function ‘setup_cgroup_environment’:
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:34:
warning: ‘/cgroup.controllers’ directive output may be truncated
writing 19 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
				  ^~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:2:
note: ‘snprintf’ output between 20 and 4116 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:34:
warning: ‘/cgroup.subtree_control’ directive output may be truncated
writing 23 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
				  ^~~~~~~~~~~~~~~~~~~~~~~
cgroup_path);
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:2:
note: ‘snprintf’ output between 24 and 4120 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
cgroup_path);
"

In order to avoid warns, lets decrease buf size for cgroup workdir on
24 bytes with assumption to include also "/cgroup.subtree_control" to
the address. The cut will never happen anyway.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-3-ivan.khoronzhuk@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/cgroup_helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/bpf/cgroup_helpers.c b/samples/bpf/cgroup_helpers.c
index 09afaddfc9ba9..b5c09cd6c7bd7 100644
--- a/samples/bpf/cgroup_helpers.c
+++ b/samples/bpf/cgroup_helpers.c
@@ -43,7 +43,7 @@
  */
 int setup_cgroup_environment(void)
 {
-	char cgroup_workdir[PATH_MAX + 1];
+	char cgroup_workdir[PATH_MAX - 24];
 
 	format_cgroup_path(cgroup_workdir, "");
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 023/130] usb: renesas_usbhs: add suspend event support in gadget mode

[Sasha Levin]

From: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>

[ Upstream commit 39abcc84846bbc0538f13c190b6a9c7e36890cd2 ]

When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt
will be generated and Suspended state bit is set in interrupt status
register. Interrupt handler will call driver->suspend(composite_suspend)
if suspended state bit is set. composite_suspend will call
ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed
by user space application via /dev/ep0.

To be able to detect host detach, extend the DVSQ_MASK to cover the
Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status
Register 0 (INTSTS0) register and perform appropriate action in the
DVST interrupt handler (usbhsg_irq_dev_state).

Without this commit, disconnection of the phone from R-Car-H3 ES2.0
Salvator-X CN9 port is not recognized and reverse role switch does
not happen. If phone is connected again it does not enumerate.

With this commit, disconnection will be recognized and reverse role
switch will happen by a user space application. If phone is connected
again it will enumerate properly and will become visible in the output
of 'lsusb'.

Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiyan.c@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/renesas_usbhs/common.h     |  3 ++-
 drivers/usb/renesas_usbhs/mod_gadget.c | 12 +++++++++---
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index b8620aa6b72e6..8424c165f732a 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -163,11 +163,12 @@ struct usbhs_priv;
 #define VBSTS	(1 << 7)	/* VBUS_0 and VBUSIN_0 Input Status */
 #define VALID	(1 << 3)	/* USB Request Receive */
 
-#define DVSQ_MASK		(0x3 << 4)	/* Device State */
+#define DVSQ_MASK		(0x7 << 4)	/* Device State */
 #define  POWER_STATE		(0 << 4)
 #define  DEFAULT_STATE		(1 << 4)
 #define  ADDRESS_STATE		(2 << 4)
 #define  CONFIGURATION_STATE	(3 << 4)
+#define  SUSPENDED_STATE	(4 << 4)
 
 #define CTSQ_MASK		(0x7)	/* Control Transfer Stage */
 #define  IDLE_SETUP_STAGE	0	/* Idle stage or setup stage */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 0dedb0d91dccb..b27f2135b66d7 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -465,12 +465,18 @@ static int usbhsg_irq_dev_state(struct usbhs_priv *priv,
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	int state = usbhs_status_get_device_state(irq_state);
 
 	gpriv->gadget.speed = usbhs_bus_get_speed(priv);
 
-	dev_dbg(dev, "state = %x : speed : %d\n",
-		usbhs_status_get_device_state(irq_state),
-		gpriv->gadget.speed);
+	dev_dbg(dev, "state = %x : speed : %d\n", state, gpriv->gadget.speed);
+
+	if (gpriv->gadget.speed != USB_SPEED_UNKNOWN &&
+	    (state & SUSPENDED_STATE)) {
+		if (gpriv->driver && gpriv->driver->suspend)
+			gpriv->driver->suspend(&gpriv->gadget);
+		usb_gadget_set_state(&gpriv->gadget, USB_STATE_SUSPENDED);
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 024/130] hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit eaecce12f5f0d2c35d278e41e1bc4522393861ab ]

When unloading omap3-rom-rng, we'll get the following:

WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable

This is because the clock may be already disabled by omap3_rom_rng_idle().
Let's fix the issue by checking for rng_idle on exit.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: 1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/omap3-rom-rng.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c
index 38b719017186e..648e39ce6bd95 100644
--- a/drivers/char/hw_random/omap3-rom-rng.c
+++ b/drivers/char/hw_random/omap3-rom-rng.c
@@ -121,7 +121,8 @@ static int omap3_rom_rng_remove(struct platform_device *pdev)
 {
 	cancel_delayed_work_sync(&idle_work);
 	hwrng_unregister(&omap3_rom_rng_ops);
-	clk_disable_unprepare(rng_clk);
+	if (!rng_idle)
+		clk_disable_unprepare(rng_clk);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 025/130] regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe()

[Sasha Levin]

From: Yizhuo <yzhai003@ucr.edu>

[ Upstream commit 472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ]

Inside function max8907_regulator_probe(), variable val could
be uninitialized if regmap_read() fails. However, val is used
later in the if statement to decide the content written to
"pmic", which is potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/max8907-regulator.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index 860400d2cd859..a8f2f07239fb9 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -299,7 +299,10 @@ static int max8907_regulator_probe(struct platform_device *pdev)
 	memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc));
 
 	/* Backwards compatibility with MAX8907B; SD1 uses different voltages */
-	regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val);
+	ret = regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val);
+	if (ret)
+		return ret;
+
 	if ((val & MAX8907_II2RR_VERSION_MASK) ==
 	    MAX8907_II2RR_VERSION_REV_B) {
 		pmic->desc[MAX8907_SD1].min_uV = 637500;
@@ -336,14 +339,20 @@ static int max8907_regulator_probe(struct platform_device *pdev)
 		}
 
 		if (pmic->desc[i].ops == &max8907_ldo_ops) {
-			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+			ret = regmap_read(config.regmap, pmic->desc[i].enable_reg,
 				    &val);
+			if (ret)
+				return ret;
+
 			if ((val & MAX8907_MASK_LDO_SEQ) !=
 			    MAX8907_MASK_LDO_SEQ)
 				pmic->desc[i].ops = &max8907_ldo_hwctl_ops;
 		} else if (pmic->desc[i].ops == &max8907_out5v_ops) {
-			regmap_read(config.regmap, pmic->desc[i].enable_reg,
+			ret = regmap_read(config.regmap, pmic->desc[i].enable_reg,
 				    &val);
+			if (ret)
+				return ret;
+
 			if ((val & (MAX8907_MASK_OUT5V_VINEN |
 						MAX8907_MASK_OUT5V_ENSRC)) !=
 			    MAX8907_MASK_OUT5V_ENSRC)
-- 
2.20.1

[PATCH AUTOSEL 4.14 026/130] media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 649cd16c438f51d4cd777e71ca1f47f6e0c5e65d ]

If usb_set_interface() failed, iface->cur_altsetting will
not be assigned and it will be used in flexcop_usb_transfer_init()
It may lead a NULL pointer dereference.

Check usb_set_interface() return value in flexcop_usb_init()
and return failed to avoid using this NULL pointer.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/b2c2/flexcop-usb.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index ac4fddfd0a43f..f1807c16438dd 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -503,7 +503,13 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 {
 	/* use the alternate setting with the larges buffer */
-	usb_set_interface(fc_usb->udev,0,1);
+	int ret = usb_set_interface(fc_usb->udev, 0, 1);
+
+	if (ret) {
+		err("set interface failed.");
+		return ret;
+	}
+
 	switch (fc_usb->udev->speed) {
 	case USB_SPEED_LOW:
 		err("cannot handle USB speed because it is too slow.");
-- 
2.20.1

[PATCH AUTOSEL 4.14 027/130] media: cec-funcs.h: add status_req checks

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 9b211f9c5a0b67afc435b86f75d78273b97db1c5 ]

The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands
both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the
follower will reply with a STATUS message. Either once or whenever the
status changes (status_req == ON).

If status_req == OFF, then it will stop sending continuous status updates,
but the follower will *not* send a STATUS message in that case.

This means that if status_req == OFF, then msg->reply should be 0 as well
since no reply is expected in that case.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/cec-funcs.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h
index 28e8a2a86e166..2a114f7a24d42 100644
--- a/include/uapi/linux/cec-funcs.h
+++ b/include/uapi/linux/cec-funcs.h
@@ -952,7 +952,8 @@ static inline void cec_msg_give_deck_status(struct cec_msg *msg,
 	msg->len = 3;
 	msg->msg[1] = CEC_MSG_GIVE_DECK_STATUS;
 	msg->msg[2] = status_req;
-	msg->reply = reply ? CEC_MSG_DECK_STATUS : 0;
+	msg->reply = (reply && status_req != CEC_OP_STATUS_REQ_OFF) ?
+				CEC_MSG_DECK_STATUS : 0;
 }
 
 static inline void cec_ops_give_deck_status(const struct cec_msg *msg,
@@ -1056,7 +1057,8 @@ static inline void cec_msg_give_tuner_device_status(struct cec_msg *msg,
 	msg->len = 3;
 	msg->msg[1] = CEC_MSG_GIVE_TUNER_DEVICE_STATUS;
 	msg->msg[2] = status_req;
-	msg->reply = reply ? CEC_MSG_TUNER_DEVICE_STATUS : 0;
+	msg->reply = (reply && status_req != CEC_OP_STATUS_REQ_OFF) ?
+				CEC_MSG_TUNER_DEVICE_STATUS : 0;
 }
 
 static inline void cec_ops_give_tuner_device_status(const struct cec_msg *msg,
-- 
2.20.1

[PATCH AUTOSEL 4.14 028/130] drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller

[Sasha Levin]

From: Matthias Kaehlcke <mka@chromium.org>

[ Upstream commit bee447e224b2645911c5d06e35dc90d8433fcef6 ]

The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 4db31b89507c5..0febaafb8d895 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -39,6 +39,7 @@
 
 #include <media/cec-notifier.h>
 
+#define DDC_CI_ADDR		0x37
 #define DDC_SEGMENT_ADDR	0x30
 
 #define HDMI_EDID_LEN		512
@@ -320,6 +321,15 @@ static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap,
 	u8 addr = msgs[0].addr;
 	int i, ret = 0;
 
+	if (addr == DDC_CI_ADDR)
+		/*
+		 * The internal I2C controller does not support the multi-byte
+		 * read and write operations needed for DDC/CI.
+		 * TOFIX: Blacklist the DDC/CI address until we filter out
+		 * unsupported I2C operations.
+		 */
+		return -EOPNOTSUPP;
+
 	dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr);
 
 	for (i = 0; i < num; i++) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 029/130] samples: pktgen: fix proc_cmd command result check logic

[Sasha Levin]

From: "Daniel T. Lee" <danieltimlee@gmail.com>

[ Upstream commit 3cad8f911575191fb3b81d8ed0e061e30f922223 ]

Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.

This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.

For clarity of an execution flow, 'errexit' flag has been set.

To cleanup pktgen on exit, trap has been added for EXIT signal.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/pktgen/functions.sh | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
index 205e4cde46012..065a7e296ee31 100644
--- a/samples/pktgen/functions.sh
+++ b/samples/pktgen/functions.sh
@@ -5,6 +5,8 @@
 # Author: Jesper Dangaaard Brouer
 # License: GPL
 
+set -o errexit
+
 ## -- General shell logging cmds --
 function err() {
     local exitcode=$1
@@ -58,6 +60,7 @@ function pg_set() {
 function proc_cmd() {
     local result
     local proc_file=$1
+    local status=0
     # after shift, the remaining args are contained in $@
     shift
     local proc_ctrl=${PROC_DIR}/$proc_file
@@ -73,13 +76,13 @@ function proc_cmd() {
 	echo "cmd: $@ > $proc_ctrl"
     fi
     # Quoting of "$@" is important for space expansion
-    echo "$@" > "$proc_ctrl"
-    local status=$?
+    echo "$@" > "$proc_ctrl" || status=$?
 
-    result=$(grep "Result: OK:" $proc_ctrl)
-    # Due to pgctrl, cannot use exit code $? from grep
-    if [[ "$result" == "" ]]; then
-	grep "Result:" $proc_ctrl >&2
+    if [[ "$proc_file" != "pgctrl" ]]; then
+        result=$(grep "Result: OK:" $proc_ctrl) || true
+        if [[ "$result" == "" ]]; then
+            grep "Result:" $proc_ctrl >&2
+        fi
     fi
     if (( $status != 0 )); then
 	err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\""
@@ -105,6 +108,8 @@ function pgset() {
     fi
 }
 
+[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+
 ## -- General shell tricks --
 
 function root_check_run_with_sudo() {
-- 
2.20.1

[PATCH AUTOSEL 4.14 030/130] block: Fix writeback throttling W=1 compiler warnings

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 1d200e9d6f635ae894993a7d0f1b9e0b6e522e3b ]

Fix the following compiler warnings:

In file included from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/cpumask.h:5,
                 from ./arch/x86/include/asm/msr.h:11,
                 from ./arch/x86/include/asm/processor.h:21,
                 from ./arch/x86/include/asm/cpufeature.h:5,
                 from ./arch/x86/include/asm/thread_info.h:53,
                 from ./include/linux/thread_info.h:38,
                 from ./arch/x86/include/asm/preempt.h:7,
                 from ./include/linux/preempt.h:78,
                 from ./include/linux/spinlock.h:51,
                 from ./include/linux/mmzone.h:8,
                 from ./include/linux/gfp.h:6,
                 from ./include/linux/mm.h:10,
                 from ./include/linux/bvec.h:13,
                 from ./include/linux/blk_types.h:10,
                 from block/blk-wbt.c:23:
In function 'strncpy',
    inlined from 'perf_trace_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'perf_trace_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'perf_trace_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'perf_trace_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'trace_event_raw_event_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'trace_event_raw_event_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'trace_event_raw_event_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
    inlined from 'trace_event_raw_event_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism"; v4.10).
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/wbt.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/trace/events/wbt.h b/include/trace/events/wbt.h
index b048694070e2c..37342a13c9cb9 100644
--- a/include/trace/events/wbt.h
+++ b/include/trace/events/wbt.h
@@ -33,7 +33,8 @@ TRACE_EVENT(wbt_stat,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strlcpy(__entry->name, dev_name(bdi->dev),
+			ARRAY_SIZE(__entry->name));
 		__entry->rmean		= stat[0].mean;
 		__entry->rmin		= stat[0].min;
 		__entry->rmax		= stat[0].max;
@@ -67,7 +68,8 @@ TRACE_EVENT(wbt_lat,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strlcpy(__entry->name, dev_name(bdi->dev),
+			ARRAY_SIZE(__entry->name));
 		__entry->lat = div_u64(lat, 1000);
 	),
 
@@ -103,7 +105,8 @@ TRACE_EVENT(wbt_step,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strlcpy(__entry->name, dev_name(bdi->dev),
+			ARRAY_SIZE(__entry->name));
 		__entry->msg	= msg;
 		__entry->step	= step;
 		__entry->window	= div_u64(window, 1000);
@@ -138,7 +141,8 @@ TRACE_EVENT(wbt_timer,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strlcpy(__entry->name, dev_name(bdi->dev),
+			ARRAY_SIZE(__entry->name));
 		__entry->status		= status;
 		__entry->step		= step;
 		__entry->inflight	= inflight;
-- 
2.20.1

[PATCH AUTOSEL 4.14 031/130] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 3cfd6464fe23deb45bb688df66184b3f32fefc16 ]

The iio_triggered_buffer_predisable() should be called last, to detach the
poll func after the devices has been suspended.

This change re-organizes things a bit so that the postenable & predisable
are symmetrical. It also converts the preenable() to a postenable().

Not stable material as there is no known problem with the current
code, it's just not consistent with the form we would like all the
IIO drivers to adopt so as to allow subsystem wide changes.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/proximity/sx9500.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index dba796c06ba6c..ac25a0c2e99d7 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -683,11 +683,15 @@ static irqreturn_t sx9500_trigger_handler(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
-static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
+static int sx9500_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct sx9500_data *data = iio_priv(indio_dev);
 	int ret = 0, i;
 
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
+
 	mutex_lock(&data->mutex);
 
 	for (i = 0; i < SX9500_NUM_CHANNELS; i++)
@@ -704,6 +708,9 @@ static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
 
 	mutex_unlock(&data->mutex);
 
+	if (ret)
+		iio_triggered_buffer_predisable(indio_dev);
+
 	return ret;
 }
 
@@ -712,8 +719,6 @@ static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
 	struct sx9500_data *data = iio_priv(indio_dev);
 	int ret = 0, i;
 
-	iio_triggered_buffer_predisable(indio_dev);
-
 	mutex_lock(&data->mutex);
 
 	for (i = 0; i < SX9500_NUM_CHANNELS; i++)
@@ -730,12 +735,13 @@ static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
 
 	mutex_unlock(&data->mutex);
 
+	iio_triggered_buffer_predisable(indio_dev);
+
 	return ret;
 }
 
 static const struct iio_buffer_setup_ops sx9500_buffer_setup_ops = {
-	.preenable = sx9500_buffer_preenable,
-	.postenable = iio_triggered_buffer_postenable,
+	.postenable = sx9500_buffer_postenable,
 	.predisable = sx9500_buffer_predisable,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 032/130] mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit d10dcb615c8e29d403a24d35f8310a7a53e3050c ]

In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.

Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 9511f5fe62f43..9d0d790a13197 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -677,8 +677,11 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 		skb_put(skb, MAX_EVENT_SIZE);
 
 		if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE,
-					   PCI_DMA_FROMDEVICE))
+					   PCI_DMA_FROMDEVICE)) {
+			kfree_skb(skb);
+			kfree(card->evtbd_ring_vbase);
 			return -1;
+		}
 
 		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 033/130] media: cx88: Fix some error handling path in 'cx8800_initdev()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit e1444e9b0424c70def6352580762d660af50e03f ]

A call to 'pci_disable_device()' is missing in the error handling path.
In some cases, a call to 'free_irq()' may also be missing.

Reorder the error handling path, add some new labels and fix the 2 issues
mentionned above.

This way, the error handling path in more in line with 'cx8800_finidev()'
(i.e. the remove function)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx88/cx88-video.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index 7d25ecd4404bf..1748812bd7e55 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1310,7 +1310,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 	core = cx88_core_get(dev->pci);
 	if (!core) {
 		err = -EINVAL;
-		goto fail_free;
+		goto fail_disable;
 	}
 	dev->core = core;
 
@@ -1356,7 +1356,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 				       cc->step, cc->default_value);
 		if (!vc) {
 			err = core->audio_hdl.error;
-			goto fail_core;
+			goto fail_irq;
 		}
 		vc->priv = (void *)cc;
 	}
@@ -1370,7 +1370,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 				       cc->step, cc->default_value);
 		if (!vc) {
 			err = core->video_hdl.error;
-			goto fail_core;
+			goto fail_irq;
 		}
 		vc->priv = (void *)cc;
 		if (vc->id == V4L2_CID_CHROMA_AGC)
@@ -1533,11 +1533,14 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 
 fail_unreg:
 	cx8800_unregister_video(dev);
-	free_irq(pci_dev->irq, dev);
 	mutex_unlock(&core->lock);
+fail_irq:
+	free_irq(pci_dev->irq, dev);
 fail_core:
 	core->v4ldev = NULL;
 	cx88_core_put(core, dev->pci);
+fail_disable:
+	pci_disable_device(pci_dev);
 fail_free:
 	kfree(dev);
 	return err;
-- 
2.20.1

[PATCH AUTOSEL 4.14 034/130] media: ti-vpe: vpe: Fix Motion Vector vpdma stride

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 102af9b9922f658f705a4b0deaccabac409131bf ]

commit 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit da4414eaed15 ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.

This caused memory corruption in the output image as mentioned in
commit 00db969964c8 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").

Fixes: 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes: da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 45bd10544189e..19c0a26146356 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1044,11 +1044,14 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_OUT) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
 		q_data = &ctx->q_data[Q_DATA_SRC];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1075,6 +1078,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 	}
 
 	if (q_data->flags & Q_DATA_FRAME_1D)
@@ -1086,7 +1090,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port)
 			   MAX_W, MAX_H);
 
 	vpdma_add_out_dtd(&ctx->desc_list, q_data->width,
-			  q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
+			  stride, &q_data->c_rect,
 			  vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1,
 			  MAX_OUT_HEIGHT_REG1, p_data->channel, flags);
 }
@@ -1105,10 +1109,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	dma_addr_t dma_addr;
 	u32 flags = 0;
 	u32 offset = 0;
+	u32 stride;
 
 	if (port == VPE_PORT_MV_IN) {
 		vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV];
 		dma_addr = ctx->mv_buf_dma[mv_buf_selector];
+		stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3,
+			       VPDMA_STRIDE_ALIGN);
 	} else {
 		/* to incorporate interleaved formats */
 		int plane = fmt->coplanar ? p_data->vb_part : 0;
@@ -1135,6 +1142,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 		}
 		/* Apply the offset */
 		dma_addr += offset;
+		stride = q_data->bytesperline[VPE_LUMA];
 
 		if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) {
 			/*
@@ -1170,10 +1178,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port)
 	if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12)
 		frame_height /= 2;
 
-	vpdma_add_in_dtd(&ctx->desc_list, q_data->width,
-			 q_data->bytesperline[VPE_LUMA], &q_data->c_rect,
-		vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width,
-		frame_height, 0, 0);
+	vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride,
+			 &q_data->c_rect, vpdma_fmt, dma_addr,
+			 p_data->channel, field, flags, frame_width,
+			 frame_height, 0, 0);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.14 035/130] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 06bec72b250b2cb3ba96fa45c2b8e0fb83745517 ]

v4l2-compliance warns with this message:

   warn: v4l2-test-formats.cpp(717): \
 	TRY_FMT cannot handle an invalid pixelformat.
   warn: v4l2-test-formats.cpp(718): \
 	This may or may not be a problem. For more information see:
   warn: v4l2-test-formats.cpp(719): \
 	http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
	...
   test VIDIOC_TRY_FMT: FAIL

We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 19c0a26146356..4dc08f5a60811 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -352,20 +352,25 @@ enum {
 };
 
 /* find our format description corresponding to the passed v4l2_format */
-static struct vpe_fmt *find_format(struct v4l2_format *f)
+static struct vpe_fmt *__find_format(u32 fourcc)
 {
 	struct vpe_fmt *fmt;
 	unsigned int k;
 
 	for (k = 0; k < ARRAY_SIZE(vpe_formats); k++) {
 		fmt = &vpe_formats[k];
-		if (fmt->fourcc == f->fmt.pix.pixelformat)
+		if (fmt->fourcc == fourcc)
 			return fmt;
 	}
 
 	return NULL;
 }
 
+static struct vpe_fmt *find_format(struct v4l2_format *f)
+{
+	return __find_format(f->fmt.pix.pixelformat);
+}
+
 /*
  * there is one vpe_dev structure in the driver, it is shared by
  * all instances.
@@ -1608,9 +1613,9 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 	unsigned int stride = 0;
 
 	if (!fmt || !(fmt->types & type)) {
-		vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
+		vpe_dbg(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
 			pix->pixelformat);
-		return -EINVAL;
+		fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	}
 
 	if (pix->field != V4L2_FIELD_NONE && pix->field != V4L2_FIELD_ALTERNATE
-- 
2.20.1

[PATCH AUTOSEL 4.14 036/130] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 2444846c0dbfa4ead21b621e4300ec32c90fbf38 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(294): \
	(int)g_sequence() < seq.last_seq + 1
   fail: v4l2-test-buffers.cpp(740): \
	buf.check(m2m_q, last_m2m_seq)
   fail: v4l2-test-buffers.cpp(974): \
	captureBufs(node, q, m2m_q, frame_count, true)
   test MMAP: FAIL

The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.

This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 4dc08f5a60811..8a5c0d3e733e1 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1448,6 +1448,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 		d_vb->timecode = s_vb->timecode;
 
 	d_vb->sequence = ctx->sequence;
+	s_vb->sequence = ctx->sequence;
 
 	d_q_data = &ctx->q_data[Q_DATA_DST];
 	if (d_q_data->flags & Q_IS_INTERLACED) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 037/130] media: ti-vpe: vpe: Make sure YUYV is set as default format

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit e20b248051ca0f90d84b4d9378e4780bc31f16c6 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
	Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
	Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
	...
   test VIDIOC_TRY_FMT: FAIL

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 8a5c0d3e733e1..a136fb14bf1a7 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2322,7 +2322,7 @@ static int vpe_open(struct file *file)
 	v4l2_ctrl_handler_setup(hdl);
 
 	s_q_data = &ctx->q_data[Q_DATA_SRC];
-	s_q_data->fmt = &vpe_formats[2];
+	s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV);
 	s_q_data->width = 1920;
 	s_q_data->height = 1080;
 	s_q_data->nplanes = 1;
-- 
2.20.1

[PATCH AUTOSEL 4.14 038/130] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit a37980ac5be29b83da67bf7d571c6bd9f90f8e45 ]

v4l2-compliance fails with this message:

   warn: v4l2-test-formats.cpp(717): \
   	TRY_FMT cannot handle an invalid pixelformat.
   test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
	4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.

Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index a136fb14bf1a7..5adafee98e4c4 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1663,7 +1663,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 			      &pix->height, MIN_H, MAX_H, H_ALIGN,
 			      S_ALIGN);
 
-	if (!pix->num_planes)
+	if (!pix->num_planes || pix->num_planes > 2)
 		pix->num_planes = fmt->coplanar ? 2 : 1;
 	else if (pix->num_planes > 1 && !fmt->coplanar)
 		pix->num_planes = 1;
-- 
2.20.1

[PATCH AUTOSEL 4.14 039/130] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit cf6acb73b050e98b5cc435fae0e8ae0157520410 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(691): ret == 0
   fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
   test MMAP: FAIL

This caused the following Kernel Warning:

WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c)
 r7:00000009 r6:60070013 r5:00000000 r4:c1053824
[<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4)
[<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104)
  r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000
[<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30)
  r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844
r4:eced4808
[<c022b7e8>] (warn_slowpath_null) from [<c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>]
(vb2_core_queue_release+0x20/0x40)
  r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac
r5:eced4844
  r4:eced4808 r3:00000004
[<c0727628>] (vb2_core_queue_release) from [<c0729528>]
(vb2_queue_release+0x10/0x14)
  r5:edbc9810 r4:eced4800
[<c0729518>] (vb2_queue_release) from [<c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
  r5:edbc9810 r4:ed67a400
[<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>]
(v4l2_release+0x3c/0x80)
  r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0
[<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc)
  r5:ecc7bd70 r4:ed5119c0
[<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14)
  r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80
r5:ece392b4
  r4:00000000
[<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8)
[<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80)
  r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0
r4:ece38d80
[<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4)
  r7:000000f8
[<c022fb24>] (do_group_exit) from [<c022fc00>]
(__wake_up_parent+0x0/0x28)
  r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001
[<c022fbe8>] (SyS_exit_group) from [<c0207c80>]
(ret_fast_syscall+0x0/0x4c)

These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.

In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 5adafee98e4c4..7af66fe95a542 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1435,9 +1435,6 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	 /* the previous dst mv buffer becomes the next src mv buffer */
 	ctx->src_mv_buf_selector = !ctx->src_mv_buf_selector;
 
-	if (ctx->aborting)
-		goto finished;
-
 	s_vb = ctx->src_vbs[0];
 	d_vb = ctx->dst_vb;
 
@@ -1502,6 +1499,9 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
 	ctx->src_vbs[0] = NULL;
 	ctx->dst_vb = NULL;
 
+	if (ctx->aborting)
+		goto finished;
+
 	ctx->bufs_completed++;
 	if (ctx->bufs_completed < ctx->bufs_per_job && job_ready(ctx)) {
 		device_run(ctx);
@@ -2400,6 +2400,12 @@ static int vpe_release(struct file *file)
 
 	mutex_lock(&dev->dev_mutex);
 	free_mv_buffers(ctx);
+
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->desc_list.buf);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->mmr_adb);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_h);
+	vpdma_unmap_desc_buf(dev->vpdma, &ctx->sc_coeff_v);
+
 	vpdma_free_desc_list(&ctx->desc_list);
 	vpdma_free_desc_buf(&ctx->mmr_adb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 040/130] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 0bac73adea4df8d34048b38f6ff24dc3e73e90b6 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
   fail: v4l2-test-formats.cpp(736): \
	Video Capture Multiplanar is valid, \
	but TRY_FMT failed to return a format
   test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpdma.h | 1 +
 drivers/media/platform/ti-vpe/vpe.c   | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h
index 7e611501c2916..f29074c849155 100644
--- a/drivers/media/platform/ti-vpe/vpdma.h
+++ b/drivers/media/platform/ti-vpe/vpdma.h
@@ -60,6 +60,7 @@ struct vpdma_data_format {
 						 * line stride of source and dest
 						 * buffers should be 16 byte aligned
 						 */
+#define VPDMA_MAX_STRIDE		65520	/* Max line stride 16 byte aligned */
 #define VPDMA_DTD_DESC_SIZE		32	/* 8 words */
 #define VPDMA_CFD_CTD_DESC_SIZE		16	/* 4 words */
 
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 7af66fe95a542..2e8970c7e22da 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1702,6 +1702,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		if (stride > plane_fmt->bytesperline)
 			plane_fmt->bytesperline = stride;
 
+		plane_fmt->bytesperline = clamp_t(u32, plane_fmt->bytesperline,
+						  stride,
+						  VPDMA_MAX_STRIDE);
+
 		plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline,
 						VPDMA_STRIDE_ALIGN);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 041/130] extcon: sm5502: Reset registers during initialization

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 6942635032cfd3e003e980d2dfa4e6323a3ce145 ]

On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader
seems to keep interrupts enabled for SM5502 when booting Linux.
Changing the cable state (i.e. plugging in a cable) - until the driver
is loaded - will therefore produce an interrupt that is never read.

In this situation, the cable state will be stuck forever on the
initial state because SM5502 stops sending interrupts.
This can be avoided by clearing those pending interrupts after
the driver has been loaded.

One way to do this is to reset all registers to default state
by writing to SM5502_REG_RESET. This ensures that we start from
a clean state, with all interrupts disabled.

Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-sm5502.c | 4 ++++
 drivers/extcon/extcon-sm5502.h | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 106ef0297b537..1a1ee3db3455f 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -69,6 +69,10 @@ struct sm5502_muic_info {
 /* Default value of SM5502 register to bring up MUIC device. */
 static struct reg_data sm5502_reg_data[] = {
 	{
+		.reg = SM5502_REG_RESET,
+		.val = SM5502_REG_RESET_MASK,
+		.invert = true,
+	}, {
 		.reg = SM5502_REG_CONTROL,
 		.val = SM5502_REG_CONTROL_MASK_INT_MASK,
 		.invert = false,
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index 974b53222f568..12f8b01e57538 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -241,6 +241,8 @@ enum sm5502_reg {
 #define DM_DP_SWITCH_UART			((DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \
 						| (DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DM_SHIFT))
 
+#define SM5502_REG_RESET_MASK			(0x1)
+
 /* SM5502 Interrupts */
 enum sm5502_irq {
 	/* INT1 */
-- 
2.20.1

[PATCH AUTOSEL 4.14 042/130] x86/mm: Use the correct function type for native_set_fixmap()

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit f53e2cd0b8ab7d9e390414470bdbd830f660133f ]

We call native_set_fixmap indirectly through the function pointer
struct pv_mmu_ops::set_fixmap, which expects the first parameter to be
'unsigned' instead of 'enum fixed_addresses'. This patch changes the
function type for native_set_fixmap to match the pointer, which fixes
indirect call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/fixmap.h | 2 +-
 arch/x86/mm/pgtable.c         | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 6390bd8c141b4..5e12b2319d7a5 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -159,7 +159,7 @@ extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
-void native_set_fixmap(enum fixed_addresses idx,
+void native_set_fixmap(unsigned /* enum fixed_addresses */ idx,
 		       phys_addr_t phys, pgprot_t flags);
 
 #ifndef CONFIG_PARAVIRT
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index b4fd36271f906..55338b3922210 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -590,8 +590,8 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
 	fixmaps_set++;
 }
 
-void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
-		       pgprot_t flags)
+void native_set_fixmap(unsigned /* enum fixed_addresses */ idx,
+		       phys_addr_t phys, pgprot_t flags)
 {
 	__native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags));
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 043/130] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 0c8a6e72f3c04bfe92a64e5e0791bfe006aabe08 ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

The iio_triggered_buffer_predisable() should be called last, to detach the
poll func after the devices has been suspended.

The position of iio_triggered_buffer_postenable() is correct.

Note this is not stable material. It's a fix in the logical
model rather fixing an actual bug.  These are being tidied up
throughout the subsystem to allow more substantial rework that
was blocked by variations in how things were done.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/chemical/atlas-ph-sensor.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index dad2a8be68308..f5859c118a44a 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -331,16 +331,16 @@ static int atlas_buffer_predisable(struct iio_dev *indio_dev)
 	struct atlas_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = iio_triggered_buffer_predisable(indio_dev);
+	ret = atlas_set_interrupt(data, false);
 	if (ret)
 		return ret;
 
-	ret = atlas_set_interrupt(data, false);
+	pm_runtime_mark_last_busy(&data->client->dev);
+	ret = pm_runtime_put_autosuspend(&data->client->dev);
 	if (ret)
 		return ret;
 
-	pm_runtime_mark_last_busy(&data->client->dev);
-	return pm_runtime_put_autosuspend(&data->client->dev);
+	return iio_triggered_buffer_predisable(indio_dev);
 }
 
 static const struct iio_trigger_ops atlas_interrupt_trigger_ops = {
-- 
2.20.1

[PATCH AUTOSEL 4.14 044/130] drm/bridge: dw-hdmi: Restore audio when setting a mode

[Sasha Levin]

From: Daniel Kurtz <djkurtz@chromium.org>

[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ]

When setting a new display mode, dw_hdmi_setup() calls
dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
the audio clock.

We should only (re-)enable the audio clock if audio was already enabled
when setting the new mode.

Without this patch, on RK3288, there will be HDMI audio on some monitors
if i2s was played to headphone when the monitor was plugged.
ACER H277HU and ASUS PB278 are two of the monitors showing this issue.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0febaafb8d895..cc1094f901255 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1743,7 +1743,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 
 		/* HDMI Initialization Step E - Configure audio */
 		hdmi_clk_regenerator_update_pixel_clock(hdmi);
-		hdmi_enable_audio_clk(hdmi, true);
+		hdmi_enable_audio_clk(hdmi, hdmi->audio_enable);
 	}
 
 	/* not for DVI mode */
-- 
2.20.1

[PATCH AUTOSEL 4.14 045/130] perf test: Report failure for mmap events

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 6add129c5d9210ada25217abc130df0b7096ee02 ]

When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.

This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.

Fixes: d723a55096b8 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/task-exit.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/tests/task-exit.c b/tools/perf/tests/task-exit.c
index 89c8e1604ca73..94fe5464bc6f3 100644
--- a/tools/perf/tests/task-exit.c
+++ b/tools/perf/tests/task-exit.c
@@ -104,6 +104,7 @@ int test__task_exit(struct test *test __maybe_unused, int subtest __maybe_unused
 	if (perf_evlist__mmap(evlist, 128, true) < 0) {
 		pr_debug("failed to mmap events: %d (%s)\n", errno,
 			 str_error_r(errno, sbuf, sizeof(sbuf)));
+		err = -1;
 		goto out_delete_evlist;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 046/130] perf report: Add warning when libunwind not compiled in

[Sasha Levin]

From: Jin Yao <yao.jin@linux.intel.com>

[ Upstream commit 800d3f561659b5436f8c57e7c26dd1f6928b5615 ]

We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.

We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).

The warning is:

Warning:
Please install libunwind development packages during the perf build.

Both TUI and stdio are supported.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-report.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 4ddb0726eebcb..fd4dd12b8f9d6 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -342,6 +342,13 @@ static int report__setup_sample_type(struct report *rep)
 				PERF_SAMPLE_BRANCH_ANY))
 		rep->nonany_branch_mode = true;
 
+#ifndef HAVE_LIBUNWIND_SUPPORT
+	if (dwarf_callchain_users) {
+		ui__warning("Please install libunwind development packages "
+			    "during the perf build.\n");
+	}
+#endif
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 047/130] perf trace: Filter own pid to avoid a feedback look in 'perf trace record -a'

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 7fbfe22cf4cfe01a88704dd76ca65d108039d297 ]

When doing a system wide 'perf trace record' we need, just like in 'perf
trace' live mode, to filter out perf trace's own pid, so set up a
tracepoint filter for the raw_syscalls tracepoints right after adding
them to the argv array that is set up to then call cmd_record().

Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uysx5w8f2y5ndoln5cq370tv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-trace.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index b224bf3f2b994..63a35036321bb 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2055,21 +2055,23 @@ static int trace__record(struct trace *trace, int argc, const char **argv)
 		"-m", "1024",
 		"-c", "1",
 	};
-
+	pid_t pid = getpid();
+	char *filter = asprintf__tp_filter_pids(1, &pid);
 	const char * const sc_args[] = { "-e", };
 	unsigned int sc_args_nr = ARRAY_SIZE(sc_args);
 	const char * const majpf_args[] = { "-e", "major-faults" };
 	unsigned int majpf_args_nr = ARRAY_SIZE(majpf_args);
 	const char * const minpf_args[] = { "-e", "minor-faults" };
 	unsigned int minpf_args_nr = ARRAY_SIZE(minpf_args);
+	int err = -1;
 
-	/* +1 is for the event string below */
-	rec_argc = ARRAY_SIZE(record_args) + sc_args_nr + 1 +
+	/* +3 is for the event string below and the pid filter */
+	rec_argc = ARRAY_SIZE(record_args) + sc_args_nr + 3 +
 		majpf_args_nr + minpf_args_nr + argc;
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 
-	if (rec_argv == NULL)
-		return -ENOMEM;
+	if (rec_argv == NULL || filter == NULL)
+		goto out_free;
 
 	j = 0;
 	for (i = 0; i < ARRAY_SIZE(record_args); i++)
@@ -2086,11 +2088,13 @@ static int trace__record(struct trace *trace, int argc, const char **argv)
 			rec_argv[j++] = "syscalls:sys_enter,syscalls:sys_exit";
 		else {
 			pr_err("Neither raw_syscalls nor syscalls events exist.\n");
-			free(rec_argv);
-			return -1;
+			goto out_free;
 		}
 	}
 
+	rec_argv[j++] = "--filter";
+	rec_argv[j++] = filter;
+
 	if (trace->trace_pgfaults & TRACE_PFMAJ)
 		for (i = 0; i < majpf_args_nr; i++)
 			rec_argv[j++] = majpf_args[i];
@@ -2102,7 +2106,11 @@ static int trace__record(struct trace *trace, int argc, const char **argv)
 	for (i = 0; i < (unsigned int)argc; i++)
 		rec_argv[j++] = argv[i];
 
-	return cmd_record(j, rec_argv);
+	err = cmd_record(j, rec_argv);
+out_free:
+	free(filter);
+	free(rec_argv);
+	return err;
 }
 
 static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
-- 
2.20.1

[PATCH AUTOSEL 4.14 048/130] usb: usbfs: Suppress problematic bind and unbind uevents.

[Sasha Levin]

From: Ingo Rohloff <ingo.rohloff@lauterbach.com>

[ Upstream commit abb0b3d96a1f9407dd66831ae33985a386d4200d ]

commit 1455cf8dbfd0 ("driver core: emit uevents when device is bound
to a driver") added bind and unbind uevents when a driver is bound or
unbound to a physical device.

For USB devices which are handled via the generic usbfs layer (via
libusb for example), this is problematic:
Each time a user space program calls
   ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
and then later
   ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);
The kernel will now produce a bind or unbind event, which does not
really contain any useful information.

This allows a user space program to run a DoS attack against programs
which listen to uevents (in particular systemd/eudev/upowerd):
A malicious user space program just has to call in a tight loop

   ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
   ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);

With this loop the malicious user space program floods the kernel and
all programs listening to uevents with tons of bind and unbind
events.

This patch suppresses uevents for ioctls USBDEVFS_CLAIMINTERFACE and
USBDEVFS_RELEASEINTERFACE.

Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20191011115518.2801-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/devio.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 62b2a7105f023..4fb4cf8c2f14d 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -755,8 +755,15 @@ static int claimintf(struct usb_dev_state *ps, unsigned int ifnum)
 	intf = usb_ifnum_to_if(dev, ifnum);
 	if (!intf)
 		err = -ENOENT;
-	else
+	else {
+		unsigned int old_suppress;
+
+		/* suppress uevents while claiming interface */
+		old_suppress = dev_get_uevent_suppress(&intf->dev);
+		dev_set_uevent_suppress(&intf->dev, 1);
 		err = usb_driver_claim_interface(&usbfs_driver, intf, ps);
+		dev_set_uevent_suppress(&intf->dev, old_suppress);
+	}
 	if (err == 0)
 		set_bit(ifnum, &ps->ifclaimed);
 	return err;
@@ -776,7 +783,13 @@ static int releaseintf(struct usb_dev_state *ps, unsigned int ifnum)
 	if (!intf)
 		err = -ENOENT;
 	else if (test_and_clear_bit(ifnum, &ps->ifclaimed)) {
+		unsigned int old_suppress;
+
+		/* suppress uevents while releasing interface */
+		old_suppress = dev_get_uevent_suppress(&intf->dev);
+		dev_set_uevent_suppress(&intf->dev, 1);
 		usb_driver_release_interface(&usbfs_driver, intf);
+		dev_set_uevent_suppress(&intf->dev, old_suppress);
 		err = 0;
 	}
 	return err;
-- 
2.20.1

[PATCH AUTOSEL 4.14 049/130] iio: adc: max1027: Reset the device at probe time

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit db033831b4f5589f9fcbadb837614a7c4eac0308 ]

All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/max1027.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index ebc715927e63b..03af02769370b 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -462,6 +462,14 @@ static int max1027_probe(struct spi_device *spi)
 		goto fail_dev_register;
 	}
 
+	/* Internal reset */
+	st->reg = MAX1027_RST_REG;
+	ret = spi_write(st->spi, &st->reg, 1);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
+		return ret;
+	}
+
 	/* Disable averaging */
 	st->reg = MAX1027_AVG_REG;
 	ret = spi_write(st->spi, &st->reg, 1);
-- 
2.20.1

[PATCH AUTOSEL 4.14 050/130] iio: dac: ad7303: replace mlock with own lock

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit c991bf9b650f39481cf3c1137092d4754a2c75de ]

This change replaces indio_dev's mlock with the driver's own lock. The lock
is mostly needed to protect state when changing the `dac_cache` info.
The lock has been extended to `ad7303_read_raw()`, to make sure that the
cache is updated if an SPI-write is already in progress.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dac/ad7303.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
index 4b0f942b89145..2e5e753ab7066 100644
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -42,6 +42,7 @@ struct ad7303_state {
 	struct regulator *vdd_reg;
 	struct regulator *vref_reg;
 
+	struct mutex lock;
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
@@ -80,7 +81,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 
 	if (pwr_down)
 		st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
@@ -91,7 +92,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
 	 * mode, so just write one of the DAC channels again */
 	ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
 
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 	return len;
 }
 
@@ -117,7 +118,9 @@ static int ad7303_read_raw(struct iio_dev *indio_dev,
 
 	switch (info) {
 	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
 		*val = st->dac_cache[chan->channel];
+		mutex_unlock(&st->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		vref_uv = ad7303_get_vref(st, chan);
@@ -145,11 +148,11 @@ static int ad7303_write_raw(struct iio_dev *indio_dev,
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
-		mutex_lock(&indio_dev->mlock);
+		mutex_lock(&st->lock);
 		ret = ad7303_write(st, chan->address, val);
 		if (ret == 0)
 			st->dac_cache[chan->channel] = val;
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&st->lock);
 		break;
 	default:
 		ret = -EINVAL;
@@ -213,6 +216,8 @@ static int ad7303_probe(struct spi_device *spi)
 
 	st->spi = spi;
 
+	mutex_init(&st->lock);
+
 	st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd");
 	if (IS_ERR(st->vdd_reg))
 		return PTR_ERR(st->vdd_reg);
-- 
2.20.1

[PATCH AUTOSEL 4.14 051/130] Bluetooth: missed cpu_to_le16 conversion in hci_init4_req

[Sasha Levin]

From: "Ben Dooks (Codethink)" <ben.dooks@codethink.co.uk>

[ Upstream commit 727ea61a5028f8ac96f75ab34cb1b56e63fd9227 ]

It looks like in hci_init4_req() the request is being
initialised from cpu-endian data but the packet is specified
to be little-endian. This causes an warning from sparse due
to __le16 to u16 conversion.

Fix this by using cpu_to_le16() on the two fields in the packet.

net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:845:27:    expected restricted __le16 [usertype] tx_len
net/bluetooth/hci_core.c:845:27:    got unsigned short [usertype] le_max_tx_len
net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:846:28:    expected restricted __le16 [usertype] tx_time
net/bluetooth/hci_core.c:846:28:    got unsigned short [usertype] le_max_tx_time

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 6bc679cd34818..d6d7364838f47 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -802,8 +802,8 @@ static int hci_init4_req(struct hci_request *req, unsigned long opt)
 	if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) {
 		struct hci_cp_le_write_def_data_len cp;
 
-		cp.tx_len = hdev->le_max_tx_len;
-		cp.tx_time = hdev->le_max_tx_time;
+		cp.tx_len = cpu_to_le16(hdev->le_max_tx_len);
+		cp.tx_time = cpu_to_le16(hdev->le_max_tx_time);
 		hci_req_add(req, HCI_OP_LE_WRITE_DEF_DATA_LEN, sizeof(cp), &cp);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 052/130] Bluetooth: hci_core: fix init for HCI_USER_CHANNEL

[Sasha Levin]

From: Mattijs Korpershoek <mkorpershoek@baylibre.com>

[ Upstream commit eb8c101e28496888a0dcfe16ab86a1bee369e820 ]

During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.

If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().

Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.

[1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html

Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index d6d7364838f47..ff80a9d41ce17 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4215,7 +4215,14 @@ static void hci_rx_work(struct work_struct *work)
 			hci_send_to_sock(hdev, skb);
 		}
 
-		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
+		/* If the device has been opened in HCI_USER_CHANNEL,
+		 * the userspace has exclusive access to device.
+		 * When device is HCI_INIT, we still need to process
+		 * the data packets to the driver in order
+		 * to complete its setup().
+		 */
+		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+		    !test_bit(HCI_INIT, &hdev->flags)) {
 			kfree_skb(skb);
 			continue;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 053/130] x86/mce: Lower throttling MCE messages' priority to warning

[Sasha Levin]

From: Benjamin Berg <bberg@redhat.com>

[ Upstream commit 9c3bafaa1fd88e4dd2dba3735a1f1abb0f2c7bb7 ]

On modern CPUs it is quite normal that the temperature limits are
reached and the CPU is throttled. In fact, often the thermal design is
not sufficient to cool the CPU at full load and limits can quickly be
reached when a burst in load happens. This will even happen with
technologies like RAPL limitting the long term power consumption of
the package.

Also, these limits are "softer", as Srinivas explains:

"CPU temperature doesn't have to hit max(TjMax) to get these warnings.
OEMs ha[ve] an ability to program a threshold where a thermal interrupt
can be generated. In some systems the offset is 20C+ (Read only value).

In recent systems, there is another offset on top of it which can be
programmed by OS, once some agent can adjust power limits dynamically.
By default this is set to low by the firmware, which I guess the
prime motivation of Benjamin to submit the patch."

So these messages do not usually indicate a hardware issue (e.g.
insufficient cooling). Log them as warnings to avoid confusion about
their severity.

 [ bp: Massage commit mesage. ]

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Christian Kellner <ckellner@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191009155424.249277-1-bberg@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index ee229ceee745c..ec6a07b04fdbb 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -185,7 +185,7 @@ static void therm_throt_process(bool new_event, int event, int level)
 	/* if we just entered the thermal event */
 	if (new_event) {
 		if (event == THERMAL_THROTTLING_EVENT)
-			pr_crit("CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
+			pr_warn("CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package",
 				state->count);
-- 
2.20.1

[PATCH AUTOSEL 4.14 054/130] drm/gma500: fix memory disclosures due to uninitialized bytes

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ]

"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/gma500/oaktrail_crtc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c
index 0fff269d3fe68..42785f3df60fd 100644
--- a/drivers/gpu/drm/gma500/oaktrail_crtc.c
+++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c
@@ -139,6 +139,7 @@ static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
 	s32 freq_error, min_error = 100000;
 
 	memset(best_clock, 0, sizeof(*best_clock));
+	memset(&clock, 0, sizeof(clock));
 
 	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
 		for (clock.n = limit->n.min; clock.n <= limit->n.max;
@@ -195,6 +196,7 @@ static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
 	int err = target;
 
 	memset(best_clock, 0, sizeof(*best_clock));
+	memset(&clock, 0, sizeof(clock));
 
 	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
 		for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
-- 
2.20.1

[PATCH AUTOSEL 4.14 055/130] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit fe2392c67db9730d46f11fc4fadfa7bffa8843fa ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

The iio_triggered_buffer_postenable() should be called before (to attach
the poll func) and then the

The iio_triggered_buffer_predisable() function is hooked directly without
anything, which is probably fine, as the postenable() version seems to also
do some reset/wake-up of the device.
This will mean it will be easier when removing it; i.e. it just gets
removed.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/pressure/zpa2326.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index 91431454eb85d..10bd5e56aacbb 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -1251,6 +1251,11 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 	const struct zpa2326_private *priv = iio_priv(indio_dev);
 	int                           err;
 
+	/* Plug our own trigger event handler. */
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err)
+		goto err;
+
 	if (!priv->waken) {
 		/*
 		 * We were already power supplied. Just clear hardware FIFO to
@@ -1258,7 +1263,7 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 		 */
 		err = zpa2326_clear_fifo(indio_dev, 0);
 		if (err)
-			goto err;
+			goto err_buffer_predisable;
 	}
 
 	if (!iio_trigger_using_own(indio_dev) && priv->waken) {
@@ -1268,16 +1273,13 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
 		 */
 		err = zpa2326_config_oneshot(indio_dev, priv->irq);
 		if (err)
-			goto err;
+			goto err_buffer_predisable;
 	}
 
-	/* Plug our own trigger event handler. */
-	err = iio_triggered_buffer_postenable(indio_dev);
-	if (err)
-		goto err;
-
 	return 0;
 
+err_buffer_predisable:
+	iio_triggered_buffer_predisable(indio_dev);
 err:
 	zpa2326_err(indio_dev, "failed to enable buffering (%d)", err);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 056/130] rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot

[Sasha Levin]

From: Chris Chiu <chiu@endlessm.com>

[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]

The RTL8723BU has problems connecting to AP after each warm reboot.
Sometimes it returns no scan result, and in most cases, it fails
the authentication for unknown reason. However, it works totally
fine after cold reboot.

Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
for cold reboot and warm reboot, the registers imply that the MAC
is already powered and thus some procedures are skipped during
driver initialization. Double checked the vendor driver, it reads
the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
during initialization based on them. This commit only tells the
RTL8723BU to do full initialization without checking MAC status.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h       | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  | 3 +++
 3 files changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 95e3993d8a331..a895b6fd6f858 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1349,6 +1349,7 @@ struct rtl8xxxu_fileops {
 	u8 has_s0s1:1;
 	u8 has_tx_report:1;
 	u8 gen2_thermal_meter:1;
+	u8 needs_full_init:1;
 	u32 adda_1t_init;
 	u32 adda_1t_path_on;
 	u32 adda_2t_path_on_a;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
index c4b86a84a721d..27e97df996c73 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
@@ -1673,6 +1673,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = {
 	.has_s0s1 = 1,
 	.has_tx_report = 1,
 	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
 	.adda_1t_init = 0x01c00014,
 	.adda_1t_path_on = 0x01c00014,
 	.adda_2t_path_on_a = 0x01c00014,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 91b01ca32e752..b58bf8e2cad2f 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -3905,6 +3905,9 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	else
 		macpower = true;
 
+	if (fops->needs_full_init)
+		macpower = false;
+
 	ret = fops->power_on(priv);
 	if (ret < 0) {
 		dev_warn(dev, "%s: Failed power on\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 4.14 057/130] x86/ioapic: Prevent inconsistent state when moving an interrupt

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit df4393424af3fbdcd5c404077176082a8ce459c4 ]

There is an issue with threaded interrupts which are marked ONESHOT
and using the fasteoi handler:

  if (IS_ONESHOT())
    mask_irq();
  ....
  cond_unmask_eoi_irq()
    chip->irq_eoi();
      if (setaffinity_pending) {
         mask_ioapic();
         ...
	 move_affinity();
	 unmask_ioapic();
      }

So if setaffinity is pending the interrupt will be moved and then
unconditionally unmasked at the ioapic level, which is wrong in two
aspects:

 1) It should be kept masked up to the point where the threaded handler
    finished.

 2) The physical chip state and the software masked state are inconsistent

Guard both the mask and the unmask with a check for the software masked
state. If the line is marked masked then the ioapic line is also masked, so
both mask_ioapic() and unmask_ioapic() can be skipped safely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Fixes: 3aa551c9b4c4 ("genirq: add threaded interrupt handler support")
Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/io_apic.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 566b7bc5deaa0..2271adbc3c42a 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1690,9 +1690,10 @@ static bool io_apic_level_ack_pending(struct mp_chip_data *data)
 
 static inline bool ioapic_irqd_mask(struct irq_data *data)
 {
-	/* If we are moving the irq we need to mask it */
+	/* If we are moving the IRQ we need to mask it */
 	if (unlikely(irqd_is_setaffinity_pending(data))) {
-		mask_ioapic_irq(data);
+		if (!irqd_irq_masked(data))
+			mask_ioapic_irq(data);
 		return true;
 	}
 	return false;
@@ -1729,7 +1730,9 @@ static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 		 */
 		if (!io_apic_level_ack_pending(data->chip_data))
 			irq_move_masked_irq(data);
-		unmask_ioapic_irq(data);
+		/* If the IRQ is masked in the core, leave it: */
+		if (!irqd_irq_masked(data))
+			unmask_ioapic_irq(data);
 	}
 }
 #else
-- 
2.20.1

[PATCH AUTOSEL 4.14 058/130] arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()

[Sasha Levin]

From: Yunfeng Ye <yeyunfeng@huawei.com>

[ Upstream commit bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ]

In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.

Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.

In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/psci.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index e8edbf13302aa..3856d51c645b5 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -84,7 +84,8 @@ static void cpu_psci_cpu_die(unsigned int cpu)
 
 static int cpu_psci_cpu_kill(unsigned int cpu)
 {
-	int err, i;
+	int err;
+	unsigned long start, end;
 
 	if (!psci_ops.affinity_info)
 		return 0;
@@ -94,16 +95,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu)
 	 * while it is dying. So, try again a few times.
 	 */
 
-	for (i = 0; i < 10; i++) {
+	start = jiffies;
+	end = start + msecs_to_jiffies(100);
+	do {
 		err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
 		if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
-			pr_info("CPU%d killed.\n", cpu);
+			pr_info("CPU%d killed (polled %d ms)\n", cpu,
+				jiffies_to_msecs(jiffies - start));
 			return 0;
 		}
 
-		msleep(10);
-		pr_info("Retrying again to check for CPU kill\n");
-	}
+		usleep_range(100, 1000);
+	} while (time_before(jiffies, end));
 
 	pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
 			cpu, err);
-- 
2.20.1

[PATCH AUTOSEL 4.14 059/130] net: phy: dp83867: enable robust auto-mdix

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 ]

The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).

CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."

Hence, enable this option by default as there are no known reasons
not to do so.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index e03e91d5f1b1b..0cbcced0870e6 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -84,6 +84,10 @@
 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX	0x0
 #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN	0x1f
 
+/* CFG3 bits */
+#define DP83867_CFG3_INT_OE			BIT(7)
+#define DP83867_CFG3_ROBUST_AUTO_MDIX		BIT(9)
+
 /* CFG4 bits */
 #define DP83867_CFG4_PORT_MIRROR_EN              BIT(0)
 
@@ -320,12 +324,13 @@ static int dp83867_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
+	val = phy_read(phydev, DP83867_CFG3);
 	/* Enable Interrupt output INT_OE in CFG3 register */
-	if (phy_interrupt_is_valid(phydev)) {
-		val = phy_read(phydev, DP83867_CFG3);
-		val |= BIT(7);
-		phy_write(phydev, DP83867_CFG3, val);
-	}
+	if (phy_interrupt_is_valid(phydev))
+		val |= DP83867_CFG3_INT_OE;
+
+	val |= DP83867_CFG3_ROBUST_AUTO_MDIX;
+	phy_write(phydev, DP83867_CFG3, val);
 
 	if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
 		dp83867_config_port_mirroring(phydev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 060/130] ALSA: hda - Fix pending unsol events at shutdown

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit ca58f55108fee41d87c9123f85ad4863e5de7f45 ]

This is an alternative fix attemp for the issue reported in the commit
caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions.  Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.

Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_bind.c  | 4 ++++
 sound/pci/hda/hda_intel.c | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
index 8db1890605f60..c175b2cf63f77 100644
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -42,6 +42,10 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev)
 {
 	struct hda_codec *codec = container_of(dev, struct hda_codec, core);
 
+	/* ignore unsol events during shutdown */
+	if (codec->bus->shutdown)
+		return;
+
 	if (codec->patch_ops.unsol_event)
 		codec->patch_ops.unsol_event(codec, ev);
 }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 96e9b3944b925..890793ad85ca1 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1450,8 +1450,11 @@ static int azx_free(struct azx *chip)
 static int azx_dev_disconnect(struct snd_device *device)
 {
 	struct azx *chip = device->device_data;
+	struct hdac_bus *bus = azx_bus(chip);
 
 	chip->bus.shutdown = 1;
+	cancel_work_sync(&bus->unsol_work);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 061/130] RDMA/qedr: Fix memory leak in user qp and mr

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit 24e412c1e00ebfe73619e6b88cbc26c2c7d41b85 ]

User QPs pbl's weren't freed properly.
MR pbls weren't freed properly.

Fixes: e0290cce6ac0 ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qedr/verbs.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 7f4cc9336442f..656e7c1a4449f 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -1343,6 +1343,14 @@ static void qedr_cleanup_user(struct qedr_dev *dev, struct qedr_qp *qp)
 	if (qp->urq.umem)
 		ib_umem_release(qp->urq.umem);
 	qp->urq.umem = NULL;
+
+	if (rdma_protocol_roce(&dev->ibdev, 1)) {
+		qedr_free_pbl(dev, &qp->usq.pbl_info, qp->usq.pbl_tbl);
+		qedr_free_pbl(dev, &qp->urq.pbl_info, qp->urq.pbl_tbl);
+	} else {
+		kfree(qp->usq.pbl_tbl);
+		kfree(qp->urq.pbl_tbl);
+	}
 }
 
 static int qedr_create_user_qp(struct qedr_dev *dev,
@@ -2331,8 +2339,8 @@ int qedr_dereg_mr(struct ib_mr *ib_mr)
 
 	dev->ops->rdma_free_tid(dev->rdma_ctx, mr->hw_mr.itid);
 
-	if ((mr->type != QEDR_MR_DMA) && (mr->type != QEDR_MR_FRMR))
-		qedr_free_pbl(dev, &mr->info.pbl_info, mr->info.pbl_table);
+	if (mr->type != QEDR_MR_DMA)
+		free_mr_info(dev, &mr->info);
 
 	/* it could be user registered memory. */
 	if (mr->umem)
-- 
2.20.1

[PATCH AUTOSEL 4.14 062/130] gpu: host1x: Allocate gather copy for host1x

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit b78e70c04c149299bd210759d7c7af7c86b89ca8 ]

Currently when the gather buffers are copied, they are copied to a
buffer that is allocated for the host1x client that wants to execute the
command streams in the buffers. However, the gather buffers will be read
by the host1x device, which causes SMMU faults if the DMA API is backed
by an IOMMU.

Fix this by allocating the gather buffer copy for the host1x device,
which makes sure that it will be mapped into the host1x's IOVA space if
the DMA API is backed by an IOMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/host1x/job.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c
index acd99783bbca1..67f3c050c4cfc 100644
--- a/drivers/gpu/host1x/job.c
+++ b/drivers/gpu/host1x/job.c
@@ -545,7 +545,8 @@ static int validate(struct host1x_firewall *fw, struct host1x_job_gather *g)
 	return err;
 }
 
-static inline int copy_gathers(struct host1x_job *job, struct device *dev)
+static inline int copy_gathers(struct device *host, struct host1x_job *job,
+			       struct device *dev)
 {
 	struct host1x_firewall fw;
 	size_t size = 0;
@@ -570,12 +571,12 @@ static inline int copy_gathers(struct host1x_job *job, struct device *dev)
 	 * Try a non-blocking allocation from a higher priority pools first,
 	 * as awaiting for the allocation here is a major performance hit.
 	 */
-	job->gather_copy_mapped = dma_alloc_wc(dev, size, &job->gather_copy,
+	job->gather_copy_mapped = dma_alloc_wc(host, size, &job->gather_copy,
 					       GFP_NOWAIT);
 
 	/* the higher priority allocation failed, try the generic-blocking */
 	if (!job->gather_copy_mapped)
-		job->gather_copy_mapped = dma_alloc_wc(dev, size,
+		job->gather_copy_mapped = dma_alloc_wc(host, size,
 						       &job->gather_copy,
 						       GFP_KERNEL);
 	if (!job->gather_copy_mapped)
@@ -636,7 +637,7 @@ int host1x_job_pin(struct host1x_job *job, struct device *dev)
 		goto out;
 
 	if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL)) {
-		err = copy_gathers(job, dev);
+		err = copy_gathers(host->dev, job, dev);
 		if (err)
 			goto out;
 	}
@@ -701,7 +702,7 @@ void host1x_job_unpin(struct host1x_job *job)
 	job->num_unpins = 0;
 
 	if (job->gather_copy_size)
-		dma_free_wc(job->channel->dev, job->gather_copy_size,
+		dma_free_wc(host->dev, job->gather_copy_size,
 			    job->gather_copy_mapped, job->gather_copy);
 }
 EXPORT_SYMBOL(host1x_job_unpin);
-- 
2.20.1

[PATCH AUTOSEL 4.14 063/130] net: dsa: LAN9303: select REGMAP when LAN9303 enable

[Sasha Levin]

From: Mao Wenan <maowenan@huawei.com>

[ Upstream commit b6989d248a2d13f02895bae1a9321b3bbccc0283 ]

When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y,
below errors can be seen:
drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE
undeclared here (not in a function)
  .reg_format_endian = REGMAP_ENDIAN_LITTLE,
drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config
has no member named reg_read
  .reg_read = lan9303_mdio_read,

It should select REGMAP in config NET_DSA_SMSC_LAN9303.

Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 83a9bc892a3be..6ae13f2419e37 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -55,6 +55,7 @@ config NET_DSA_QCA8K
 config NET_DSA_SMSC_LAN9303
 	tristate
 	select NET_DSA_TAG_LAN9303
+	select REGMAP
 	---help---
 	  This enables support for the SMSC/Microchip LAN9303 3 port ethernet
 	  switch chips.
-- 
2.20.1

[PATCH AUTOSEL 4.14 064/130] phy: qcom-usb-hs: Fix extcon double register after power cycle

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ]

Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:

	double register detected
	WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
	Call trace:
	 ...
	 extcon_register_notifier+0x74/0xb8
	 devm_extcon_register_notifier+0x54/0xb8
	 qcom_usb_hs_phy_power_on+0x1fc/0x208
	 ...

... and USB stops working after plugging the cable out and in
another time.

The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-usb-hs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 2d0c70b5589f4..643934a2a70c3 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -159,8 +159,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy)
 		/* setup initial state */
 		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
 					      uphy->vbus_edev);
-		ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
-				EXTCON_USB, &uphy->vbus_notify);
+		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+					       &uphy->vbus_notify);
 		if (ret)
 			goto err_ulpi;
 	}
@@ -181,6 +181,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy)
 {
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 
+	if (uphy->vbus_edev)
+		extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+					   &uphy->vbus_notify);
 	regulator_disable(uphy->v3p3);
 	regulator_disable(uphy->v1p8);
 	clk_disable_unprepare(uphy->sleep_clk);
-- 
2.20.1

[PATCH AUTOSEL 4.14 065/130] s390/time: ensure get_clock_monotonic() returns monotonic values

[Sasha Levin]

From: Heiko Carstens <heiko.carstens@de.ibm.com>

[ Upstream commit 011620688a71f2f1fe9901dbc2479a7c01053196 ]

The current implementation of get_clock_monotonic() leaves it up to
the caller to call the function with preemption disabled. The only
core kernel caller (sched_clock) however does not disable preemption.

In order to make sure that all callers of this function see monotonic
values handle disabling preemption within the function itself.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/timex.h | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 64539c221672b..0f12a3f912820 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -10,8 +10,9 @@
 #ifndef _ASM_S390_TIMEX_H
 #define _ASM_S390_TIMEX_H
 
-#include <asm/lowcore.h>
+#include <linux/preempt.h>
 #include <linux/time64.h>
+#include <asm/lowcore.h>
 
 /* The value of the TOD clock for 1.1.1970. */
 #define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
@@ -186,15 +187,18 @@ extern unsigned char tod_clock_base[16] __aligned(8);
 /**
  * get_clock_monotonic - returns current time in clock rate units
  *
- * The caller must ensure that preemption is disabled.
  * The clock and tod_clock_base get changed via stop_machine.
- * Therefore preemption must be disabled when calling this
- * function, otherwise the returned value is not guaranteed to
- * be monotonic.
+ * Therefore preemption must be disabled, otherwise the returned
+ * value is not guaranteed to be monotonic.
  */
 static inline unsigned long long get_tod_clock_monotonic(void)
 {
-	return get_tod_clock() - *(unsigned long long *) &tod_clock_base[1];
+	unsigned long long tod;
+
+	preempt_disable();
+	tod = get_tod_clock() - *(unsigned long long *) &tod_clock_base[1];
+	preempt_enable();
+	return tod;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.14 066/130] s390/mm: add mm_pxd_folded() checks to pxd_free()

[Sasha Levin]

From: Gerald Schaefer <gerald.schaefer@de.ibm.com>

[ Upstream commit 2416cefc504ba8ae9b17e3e6b40afc72708f96be ]

Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded
page tables. This is not an issue so far, as those functions will actually
never be called, since no code will reach them when page tables are folded.

In order to avoid future issues, and to make the s390 code more similar to
other architectures, add mm_pxd_folded() checks, similar to how it is done
in pxd_free_tlb().

This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add tests validating architecture
page table helpers").

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/pgalloc.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index bbe99cb8219d9..11857fea993c5 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -70,7 +70,12 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long address)
 		crst_table_init(table, _REGION2_ENTRY_EMPTY);
 	return (p4d_t *) table;
 }
-#define p4d_free(mm, p4d) crst_table_free(mm, (unsigned long *) p4d)
+
+static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
+{
+	if (!mm_p4d_folded(mm))
+		crst_table_free(mm, (unsigned long *) p4d);
+}
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 {
@@ -79,7 +84,12 @@ static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 		crst_table_init(table, _REGION3_ENTRY_EMPTY);
 	return (pud_t *) table;
 }
-#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud)
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	if (!mm_pud_folded(mm))
+		crst_table_free(mm, (unsigned long *) pud);
+}
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
 {
@@ -97,6 +107,8 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
+	if (mm_pmd_folded(mm))
+		return;
 	pgtable_pmd_page_dtor(virt_to_page(pmd));
 	crst_table_free(mm, (unsigned long *) pmd);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 067/130] libata: Ensure ata_port probe has completed before detach

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 130f4caf145c3562108b245a576db30b916199d2 ]

With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN:

[   23.452574] ------------[ cut here ]------------
[   23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168
[   23.466047] Modules linked in:
[   23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296
[   23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[   23.486286] pstate: a0c00009 (NzCv daif +PAN +UAO)
[   23.491065] pc : ata_host_detach+0x15c/0x168
[   23.495322] lr : ata_host_detach+0x88/0x168
[   23.499491] sp : ffff800011cabb50
[   23.502792] x29: ffff800011cabb50 x28: 0000000000000007
[   23.508091] x27: ffff80001137f068 x26: ffff8000112c0c28
[   23.513390] x25: 0000000000003848 x24: ffff0023ea185300
[   23.518689] x23: 0000000000000001 x22: 00000000000014c0
[   23.523987] x21: 0000000000013740 x20: ffff0023bdc20000
[   23.529286] x19: 0000000000000000 x18: 0000000000000004
[   23.534584] x17: 0000000000000001 x16: 00000000000000f0
[   23.539883] x15: ffff0023eac13790 x14: ffff0023eb76c408
[   23.545181] x13: 0000000000000000 x12: ffff0023eac13790
[   23.550480] x11: ffff0023eb76c228 x10: 0000000000000000
[   23.555779] x9 : ffff0023eac13798 x8 : 0000000040000000
[   23.561077] x7 : 0000000000000002 x6 : 0000000000000001
[   23.566376] x5 : 0000000000000002 x4 : 0000000000000000
[   23.571674] x3 : ffff0023bf08a0bc x2 : 0000000000000000
[   23.576972] x1 : 3099674201f72700 x0 : 0000000000400284
[   23.582272] Call trace:
[   23.584706]  ata_host_detach+0x15c/0x168
[   23.588616]  ata_pci_remove_one+0x10/0x18
[   23.592615]  ahci_remove_one+0x20/0x40
[   23.596356]  pci_device_remove+0x3c/0xe0
[   23.600267]  really_probe+0xdc/0x3e0
[   23.603830]  driver_probe_device+0x58/0x100
[   23.608000]  device_driver_attach+0x6c/0x90
[   23.612169]  __driver_attach+0x84/0xc8
[   23.615908]  bus_for_each_dev+0x74/0xc8
[   23.619730]  driver_attach+0x20/0x28
[   23.623292]  bus_add_driver+0x148/0x1f0
[   23.627115]  driver_register+0x60/0x110
[   23.630938]  __pci_register_driver+0x40/0x48
[   23.635199]  ahci_pci_driver_init+0x20/0x28
[   23.639372]  do_one_initcall+0x5c/0x1b0
[   23.643199]  kernel_init_freeable+0x1a4/0x24c
[   23.647546]  kernel_init+0x10/0x108
[   23.651023]  ret_from_fork+0x10/0x18
[   23.654590] ---[ end trace 634a14b675b71c13 ]---

With KASAN also enabled, we may also get many use-after-free reports.

The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may
attempt to detach the ata_port before it has been probed.

This is because the ata_ports are async probed, meaning that there is no
guarantee that the ata_port has probed prior to detach. When the ata_port
does probe in this scenario, we get all sorts of issues as the detach may
have already happened.

Fix by ensuring synchronisation with async_synchronize_full(). We could
alternatively use the cookie returned from the ata_port probe
async_schedule() call, but that means managing the cookie, so more
complicated.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cbb162b683b69..08f67c1094294 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6676,6 +6676,9 @@ void ata_host_detach(struct ata_host *host)
 {
 	int i;
 
+	/* Ensure ata_port probe has completed */
+	async_synchronize_full();
+
 	for (i = 0; i < host->n_ports; i++)
 		ata_port_detach(host->ports[i]);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 068/130] loop: fix no-unmap write-zeroes request behavior

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit efcfec579f6139528c9e6925eca2bc4a36da65c6 ]

Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range.  This behavior is
correct if unmapping is allowed.  However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.

To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.

Fixes: 19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/loop.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ec61dd873c93d..453e3728e6573 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -414,18 +414,20 @@ static int lo_read_transfer(struct loop_device *lo, struct request *rq,
 	return ret;
 }
 
-static int lo_discard(struct loop_device *lo, struct request *rq, loff_t pos)
+static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
+			int mode)
 {
 	/*
-	 * We use punch hole to reclaim the free space used by the
-	 * image a.k.a. discard. However we do not support discard if
-	 * encryption is enabled, because it may give an attacker
-	 * useful information.
+	 * We use fallocate to manipulate the space mappings used by the image
+	 * a.k.a. discard/zerorange. However we do not support this if
+	 * encryption is enabled, because it may give an attacker useful
+	 * information.
 	 */
 	struct file *file = lo->lo_backing_file;
-	int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE;
 	int ret;
 
+	mode |= FALLOC_FL_KEEP_SIZE;
+
 	if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
 		ret = -EOPNOTSUPP;
 		goto out;
@@ -565,9 +567,17 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq)
 	switch (req_op(rq)) {
 	case REQ_OP_FLUSH:
 		return lo_req_flush(lo, rq);
-	case REQ_OP_DISCARD:
 	case REQ_OP_WRITE_ZEROES:
-		return lo_discard(lo, rq, pos);
+		/*
+		 * If the caller doesn't want deallocation, call zeroout to
+		 * write zeroes the range.  Otherwise, punch them out.
+		 */
+		return lo_fallocate(lo, rq, pos,
+			(rq->cmd_flags & REQ_NOUNMAP) ?
+				FALLOC_FL_ZERO_RANGE :
+				FALLOC_FL_PUNCH_HOLE);
+	case REQ_OP_DISCARD:
+		return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE);
 	case REQ_OP_WRITE:
 		if (lo->transfer)
 			return lo_write_transfer(lo, rq, pos);
-- 
2.20.1

[PATCH AUTOSEL 4.14 069/130] ata: sata_mv, avoid trigerrable BUG_ON

[Sasha Levin]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit e9f691d899188679746eeb96e6cb520459eda9b4 ]

There are several reports that the BUG_ON on unsupported command in
mv_qc_prep can be triggered under some circumstances:
https://bugzilla.suse.com/show_bug.cgi?id=1110252
https://serverfault.com/questions/888897/raid-problems-after-power-outage
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185
https://bugs.centos.org/view.php?id=14998

Let sata_mv handle the failure gracefully: warn about that incl. the
failed command number and return an AC_ERR_INVALID error. We can do that
now thanks to the previous patch.

Remove also the long-standing FIXME.

[v2] use %.2x as commands are defined as hexa.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_mv.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 3b2246dded74f..d897deb4bffbe 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2111,12 +2111,10 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 		 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
 		 * of which are defined/used by Linux.  If we get here, this
 		 * driver needs work.
-		 *
-		 * FIXME: modify libata to give qc_prep a return value and
-		 * return error here.
 		 */
-		BUG_ON(tf->command);
-		break;
+		ata_port_err(ap, "%s: unsupported command: %.2x\n", __func__,
+				tf->command);
+		return AC_ERR_INVALID;
 	}
 	mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
 	mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.14 070/130] pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ]

The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.

Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.

Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/cpu-sh4/cpu/sh7734.h | 2 +-
 drivers/pinctrl/sh-pfc/pfc-sh7734.c  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7734.h b/arch/sh/include/cpu-sh4/cpu/sh7734.h
index 96f0246ad2f2b..82b63208135ae 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7734.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7734.h
@@ -134,7 +134,7 @@ enum {
 	GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C,
 		GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A,
 	GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B,
-	GPIO_FN_RD_WR, GPIO_FN_TCLK0,
+	GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4,
 	GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B,
 		GPIO_FN_ET0_ETXD3_A,
 	GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
index 33232041ee86d..3eccc9b3ca84a 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
@@ -1453,7 +1453,7 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(ET0_ETXD2_A),
 	GPIO_FN(EX_CS5), GPIO_FN(SD1_CMD_A), GPIO_FN(ATADIR), GPIO_FN(QSSL_B),
 	GPIO_FN(ET0_ETXD3_A),
-	GPIO_FN(RD_WR), GPIO_FN(TCLK1_B),
+	GPIO_FN(RD_WR), GPIO_FN(TCLK0), GPIO_FN(CAN_CLK_B), GPIO_FN(ET0_ETXD4),
 	GPIO_FN(EX_WAIT0), GPIO_FN(TCLK1_B),
 	GPIO_FN(EX_WAIT1), GPIO_FN(SD1_DAT0_A), GPIO_FN(DREQ2),
 		GPIO_FN(CAN1_TX_C), GPIO_FN(ET0_LINK_C), GPIO_FN(ET0_ETXD5_A),
@@ -1949,7 +1949,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    /* IP3_20 [1] */
 		FN_EX_WAIT0, FN_TCLK1_B,
 	    /* IP3_19_18 [2] */
-		FN_RD_WR, FN_TCLK1_B, 0, 0,
+		FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
 	    /* IP3_17_15 [3] */
 		FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B,
 		FN_ET0_ETXD3_A, 0, 0, 0,
-- 
2.20.1

[PATCH AUTOSEL 4.14 071/130] iio: dln2-adc: fix iio_triggered_buffer_postenable() position

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit a7bddfe2dfce1d8859422124abe1964e0ecd386e ]

The iio_triggered_buffer_postenable() hook should be called first to
attach the poll function. The iio_triggered_buffer_predisable() hook is
called last (as is it should).

This change moves iio_triggered_buffer_postenable() to be called first. It
adds iio_triggered_buffer_predisable() on the error paths of the postenable
hook.
For the predisable hook, some code-paths have been changed to make sure
that the iio_triggered_buffer_predisable() hook gets called in case there
is an error before it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/dln2-adc.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c
index ab8d6aed5085e..2a299bbd6acf3 100644
--- a/drivers/iio/adc/dln2-adc.c
+++ b/drivers/iio/adc/dln2-adc.c
@@ -528,6 +528,10 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 	u16 conflict;
 	unsigned int trigger_chan;
 
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
+
 	mutex_lock(&dln2->mutex);
 
 	/* Enable ADC */
@@ -541,6 +545,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 				(int)conflict);
 			ret = -EBUSY;
 		}
+		iio_triggered_buffer_predisable(indio_dev);
 		return ret;
 	}
 
@@ -554,6 +559,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 		mutex_unlock(&dln2->mutex);
 		if (ret < 0) {
 			dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
+			iio_triggered_buffer_predisable(indio_dev);
 			return ret;
 		}
 	} else {
@@ -561,12 +567,12 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
 		mutex_unlock(&dln2->mutex);
 	}
 
-	return iio_triggered_buffer_postenable(indio_dev);
+	return 0;
 }
 
 static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int ret;
+	int ret, ret2;
 	struct dln2_adc *dln2 = iio_priv(indio_dev);
 
 	mutex_lock(&dln2->mutex);
@@ -581,12 +587,14 @@ static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
 	ret = dln2_adc_set_port_enabled(dln2, false, NULL);
 
 	mutex_unlock(&dln2->mutex);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
-		return ret;
-	}
 
-	return iio_triggered_buffer_predisable(indio_dev);
+	ret2 = iio_triggered_buffer_predisable(indio_dev);
+	if (ret == 0)
+		ret = ret2;
+
+	return ret;
 }
 
 static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = {
-- 
2.20.1

[PATCH AUTOSEL 4.14 072/130] Bluetooth: Fix advertising duplicated flags

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 6012b9346d8959194c239fd60a62dfec98d43048 ]

Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x06
        Flags: 0x04
          BR/EDR Not Supported
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_request.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index b73ac149de34f..759329bec399c 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -1095,6 +1095,14 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)
 
 	instance_flags = get_adv_instance_flags(hdev, instance);
 
+	/* If instance already has the flags set skip adding it once
+	 * again.
+	 */
+	if (adv_instance && eir_get_data(adv_instance->adv_data,
+					 adv_instance->adv_data_len, EIR_FLAGS,
+					 NULL))
+		goto skip_flags;
+
 	/* The Add Advertising command allows userspace to set both the general
 	 * and limited discoverable flags.
 	 */
@@ -1127,6 +1135,7 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)
 		}
 	}
 
+skip_flags:
 	if (adv_instance) {
 		memcpy(ptr, adv_instance->adv_data,
 		       adv_instance->adv_data_len);
-- 
2.20.1

[PATCH AUTOSEL 4.14 073/130] pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler()

[Sasha Levin]

From: "Ben Dooks (Codethink)" <ben.dooks@codethink.co.uk>

[ Upstream commit 10ff58aa3c2e2a093b6ad615a7e3d8bb0dc613e5 ]

The regs pointer in amd_gpio_irq_handler() should have __iomem
on it, so add that to fix the following sparse warnings:

drivers/pinctrl/pinctrl-amd.c:555:14: warning: incorrect type in assignment (different address spaces)
drivers/pinctrl/pinctrl-amd.c:555:14:    expected unsigned int [usertype] *regs
drivers/pinctrl/pinctrl-amd.c:555:14:    got void [noderef] <asn:2> *base
drivers/pinctrl/pinctrl-amd.c:563:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:563:34:    expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:563:34:    got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:580:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:580:34:    expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:580:34:    got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:587:25: warning: incorrect type in argument 2 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:587:25:    expected void volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:587:25:    got unsigned int [usertype] *

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191022151154.5986-1-ben.dooks@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-amd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index b78f42abff2f8..7385cd81498c4 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -509,7 +509,8 @@ static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
 	irqreturn_t ret = IRQ_NONE;
 	unsigned int i, irqnr;
 	unsigned long flags;
-	u32 *regs, regval;
+	u32 __iomem *regs;
+	u32  regval;
 	u64 status, mask;
 
 	/* Read the wake status */
-- 
2.20.1

[PATCH AUTOSEL 4.14 074/130] ixgbe: protect TX timestamping from API misuse

[Sasha Levin]

From: Manjunath Patil <manjunath.b.patil@oracle.com>

[ Upstream commit 07066d9dc3d2326fbad8f7b0cb0120cff7b7dedb ]

HW timestamping can only be requested for a packet if the NIC is first
setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe
driver still allowed TX packets to request HW timestamping. In this
situation, we see 'clearing Tx Timestamp hang' noise in the log.

Fix this by checking that the NIC is configured for HW TX timestamping
before accepting a HW TX timestamping request.

Similar-to:
   commit 26bd4e2db06b ("igb: protect TX timestamping from API misuse")
   commit 0a6f2f05a2f5 ("igb: Fix a test with HWTSTAMP_TX_ON")

Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 4801d96c4fa91..0edfd199937d5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -8379,7 +8379,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
 	    adapter->ptp_clock) {
-		if (!test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
+		if (adapter->tstamp_config.tx_type == HWTSTAMP_TX_ON &&
+		    !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS,
 					   &adapter->state)) {
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			tx_flags |= IXGBE_TX_FLAGS_TSTAMP;
-- 
2.20.1

[PATCH AUTOSEL 4.14 075/130] media: rcar_drif: fix a memory disclosure

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit d39083234c60519724c6ed59509a2129fd2aed41 ]

"f->fmt.sdr.reserved" is uninitialized. As other peer drivers
like msi2500 and airspy do, the fix initializes it to avoid
memory disclosures.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar_drif.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/rcar_drif.c b/drivers/media/platform/rcar_drif.c
index 522364ff0d5d8..3871ed6a1fcbf 100644
--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -915,6 +915,7 @@ static int rcar_drif_g_fmt_sdr_cap(struct file *file, void *priv,
 {
 	struct rcar_drif_sdr *sdr = video_drvdata(file);
 
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	f->fmt.sdr.pixelformat = sdr->fmt->pixelformat;
 	f->fmt.sdr.buffersize = sdr->fmt->buffersize;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 076/130] media: v4l2-core: fix touch support in v4l_g_fmt

[Sasha Levin]

From: Vandana BN <bnvandana@gmail.com>

[ Upstream commit 545b618cfb5cadacd00c25066b9a36540e5ca9e9 ]

v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of
the v4l2_pix_format structure to default values.This was
missing in v4l_g_fmt, which would lead to failures in
v4l2-compliance tests.

Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-ioctl.c | 33 +++++++++++++++-------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 681eef972e63b..7cafc8a57950a 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1363,10 +1363,26 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops,
 	return ret;
 }
 
+static void v4l_pix_format_touch(struct v4l2_pix_format *p)
+{
+	/*
+	 * The v4l2_pix_format structure contains fields that make no sense for
+	 * touch. Set them to default values in this case.
+	 */
+
+	p->field = V4L2_FIELD_NONE;
+	p->colorspace = V4L2_COLORSPACE_RAW;
+	p->flags = 0;
+	p->ycbcr_enc = 0;
+	p->quantization = 0;
+	p->xfer_func = 0;
+}
+
 static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops,
 				struct file *file, void *fh, void *arg)
 {
 	struct v4l2_format *p = arg;
+	struct video_device *vfd = video_devdata(file);
 	int ret = check_fmt(file, p->type);
 
 	if (ret)
@@ -1404,6 +1420,8 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops,
 		ret = ops->vidioc_g_fmt_vid_cap(file, fh, arg);
 		/* just in case the driver zeroed it again */
 		p->fmt.pix.priv = V4L2_PIX_FMT_PRIV_MAGIC;
+		if (vfd->vfl_type == VFL_TYPE_TOUCH)
+			v4l_pix_format_touch(&p->fmt.pix);
 		return ret;
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
 		return ops->vidioc_g_fmt_vid_cap_mplane(file, fh, arg);
@@ -1439,21 +1457,6 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops,
 	return -EINVAL;
 }
 
-static void v4l_pix_format_touch(struct v4l2_pix_format *p)
-{
-	/*
-	 * The v4l2_pix_format structure contains fields that make no sense for
-	 * touch. Set them to default values in this case.
-	 */
-
-	p->field = V4L2_FIELD_NONE;
-	p->colorspace = V4L2_COLORSPACE_RAW;
-	p->flags = 0;
-	p->ycbcr_enc = 0;
-	p->quantization = 0;
-	p->xfer_func = 0;
-}
-
 static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops,
 				struct file *file, void *fh, void *arg)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.14 077/130] rfkill: allocate static minor

[Sasha Levin]

From: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ]

udev has a feature of creating /dev/<node> device-nodes if it finds
a devnode:<node> modalias. This allows for auto-loading of modules that
provide the node. This requires to use a statically allocated minor
number for misc character devices.

However, rfkill uses dynamic minor numbers and prevents auto-loading
of the module. So allocate the next static misc minor number and use
it for rfkill.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/miscdevice.h | 1 +
 net/rfkill/core.c          | 9 +++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index 4de703d9e21f0..5e1e50b8f8c47 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -56,6 +56,7 @@
 #define UHID_MINOR		239
 #define USERIO_MINOR		240
 #define VHOST_VSOCK_MINOR	241
+#define RFKILL_MINOR		242
 #define MISC_DYNAMIC_MINOR	255
 
 struct device;
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 2064c3a35ef84..99a2e55b01cf3 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -1312,10 +1312,12 @@ static const struct file_operations rfkill_fops = {
 	.llseek		= no_llseek,
 };
 
+#define RFKILL_NAME "rfkill"
+
 static struct miscdevice rfkill_miscdev = {
-	.name	= "rfkill",
 	.fops	= &rfkill_fops,
-	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= RFKILL_NAME,
+	.minor	= RFKILL_MINOR,
 };
 
 static int __init rfkill_init(void)
@@ -1367,3 +1369,6 @@ static void __exit rfkill_exit(void)
 	class_unregister(&rfkill_class);
 }
 module_exit(rfkill_exit);
+
+MODULE_ALIAS_MISCDEV(RFKILL_MINOR);
+MODULE_ALIAS("devname:" RFKILL_NAME);
-- 
2.20.1

Re: [PATCH AUTOSEL 4.14 077/130] rfkill: allocate static minor

[Greg Kroah-Hartman]

On Tue, Dec 10, 2019 at 05:02:08PM -0500, Sasha Levin wrote:
> From: Marcel Holtmann <marcel@holtmann.org>
> 
> [ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ]
> 
> udev has a feature of creating /dev/<node> device-nodes if it finds
> a devnode:<node> modalias. This allows for auto-loading of modules that
> provide the node. This requires to use a statically allocated minor
> number for misc character devices.
> 
> However, rfkill uses dynamic minor numbers and prevents auto-loading
> of the module. So allocate the next static misc minor number and use
> it for rfkill.
> 
> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
> Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  include/linux/miscdevice.h | 1 +
>  net/rfkill/core.c          | 9 +++++++--
>  2 files changed, 8 insertions(+), 2 deletions(-)

This is not needed in older kernels, please do not backport it unless
the networking developers _REALLY_ think it is necessary.

thanks,

greg k-h

[PATCH AUTOSEL 4.14 078/130] bnx2x: Fix PF-VF communication over multi-cos queues.

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit dc5a3d79c345871439ffe72550b604fcde9770e1 ]

PF driver doesn't enable tx-switching for all cos queues/clients,
which causes packets drop from PF to VF. Fix this by enabling
tx-switching on all cos queues/clients.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_sriov.c    | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 9ca994d0bab66..1977e0c552dff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2389,15 +2389,21 @@ static int bnx2x_set_pf_tx_switching(struct bnx2x *bp, bool enable)
 	/* send the ramrod on all the queues of the PF */
 	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
+		int tx_idx;
 
 		/* Set the appropriate Queue object */
 		q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
 
-		/* Update the Queue state */
-		rc = bnx2x_queue_state_change(bp, &q_params);
-		if (rc) {
-			BNX2X_ERR("Failed to configure Tx switching\n");
-			return rc;
+		for (tx_idx = FIRST_TX_COS_INDEX;
+		     tx_idx < fp->max_cos; tx_idx++) {
+			q_params.params.update.cid_index = tx_idx;
+
+			/* Update the Queue state */
+			rc = bnx2x_queue_state_change(bp, &q_params);
+			if (rc) {
+				BNX2X_ERR("Failed to configure Tx switching\n");
+				return rc;
+			}
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 079/130] spi: img-spfi: fix potential double release

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit e9a8ba9769a0e354341bc6cc01b98aadcea1dfe9 ]

The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they
are released. As a result, they will be released again, either on the
error handling branch in the same function or in the corresponding
remove function, i.e. img_spfi_remove(). This patch fixes the bug by
setting the two members to NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-img-spfi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 7a37090dabbea..2e65b70c78792 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -673,6 +673,8 @@ static int img_spfi_probe(struct platform_device *pdev)
 			dma_release_channel(spfi->tx_ch);
 		if (spfi->rx_ch)
 			dma_release_channel(spfi->rx_ch);
+		spfi->tx_ch = NULL;
+		spfi->rx_ch = NULL;
 		dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n");
 	} else {
 		master->dma_tx = spfi->tx_ch;
-- 
2.20.1

[PATCH AUTOSEL 4.14 080/130] ALSA: timer: Limit max amount of slave instances

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit fdea53fe5de532969a332d6e5e727f2ad8bf084d ]

The fuzzer tries to open the timer instances as much as possible, and
this may cause a system hiccup easily.  We've already introduced the
cap for the max number of available instances for the h/w timers, and
we should put such a limit also to the slave timers, too.

This patch introduces the limit to the multiple opened slave timers.
The upper limit is hard-coded to 1000 for now, which should suffice
for any practical usages up to now.

Link: https://lore.kernel.org/r/20191106154257.5853-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/timer.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/core/timer.c b/sound/core/timer.c
index c60dfd52e8a6d..22589a073423b 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -88,6 +88,9 @@ static LIST_HEAD(snd_timer_slave_list);
 /* lock for slave active lists */
 static DEFINE_SPINLOCK(slave_active_lock);
 
+#define MAX_SLAVE_INSTANCES	1000
+static int num_slaves;
+
 static DEFINE_MUTEX(register_mutex);
 
 static int snd_timer_free(struct snd_timer *timer);
@@ -266,6 +269,10 @@ int snd_timer_open(struct snd_timer_instance **ti,
 			err = -EINVAL;
 			goto unlock;
 		}
+		if (num_slaves >= MAX_SLAVE_INSTANCES) {
+			err = -EBUSY;
+			goto unlock;
+		}
 		timeri = snd_timer_instance_new(owner, NULL);
 		if (!timeri) {
 			err = -ENOMEM;
@@ -275,6 +282,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 		timeri->slave_id = tid->device;
 		timeri->flags |= SNDRV_TIMER_IFLG_SLAVE;
 		list_add_tail(&timeri->open_list, &snd_timer_slave_list);
+		num_slaves++;
 		err = snd_timer_check_slave(timeri);
 		if (err < 0) {
 			snd_timer_close_locked(timeri, &card_dev_to_put);
@@ -364,6 +372,8 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri,
 	struct snd_timer_instance *slave, *tmp;
 
 	list_del(&timeri->open_list);
+	if (timeri->flags & SNDRV_TIMER_IFLG_SLAVE)
+		num_slaves--;
 
 	/* force to stop the timer */
 	snd_timer_stop(timeri);
-- 
2.20.1

[PATCH AUTOSEL 4.14 081/130] rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 5174f1e41074b5186608badc2e89441d021e8c08 ]

This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with
Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a
single memory leak during probe:

unreferenced object 0xec13ee40 (size 176):
  comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164
    [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common]
    [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu]
    [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi]
    [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211]
    [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211]
    [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211]
    [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211]
    [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211]
    [<ac5fcae4>] process_one_work+0x22c/0x564
    [<f5e6d3b6>] worker_thread+0x44/0x5d8
    [<82c7b073>] kthread+0x150/0x154
    [<b43e1b7d>] ret_from_fork+0x14/0x2c
    [<794dff30>] 0x0

It is because 8192cu doesn't implement usb_cmd_send_packet(), and this
patch just frees the skb within the function to resolve memleak problem
by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download
command packet for firmware via the function, applying this patch doesn't
affect driver behavior.

Reported-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index 530e80f0ef0b7..1ee7f796113bc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -1556,6 +1556,8 @@ static bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
    * This is maybe necessary:
    * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
    */
+	dev_kfree_skb(skb);
+
 	return true;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 082/130] perf probe: Fix to find range-only function instance

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit b77afa1f810f37bd8a36cb1318178dfe2d7af6b6 ]

Fix die_is_func_instance() to find range-only function instance.

In some case, a function instance can be made without any low PC or
entry PC, but only with address ranges by optimization.  (e.g. cold text
partially in "text.unlikely" section) To find such function instance, we
have to check the range attribute too.

Fixes: e1ecbbc3fa83 ("perf probe: Fix to handle optimized not-inlined functions")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190835669.1859.8368628035930950596.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index f5acda13dcfa7..bc52b38407066 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -331,10 +331,14 @@ bool die_is_func_def(Dwarf_Die *dw_die)
 bool die_is_func_instance(Dwarf_Die *dw_die)
 {
 	Dwarf_Addr tmp;
+	Dwarf_Attribute attr_mem;
 
 	/* Actually gcc optimizes non-inline as like as inlined */
-	return !dwarf_func_inline(dw_die) && dwarf_entrypc(dw_die, &tmp) == 0;
+	return !dwarf_func_inline(dw_die) &&
+	       (dwarf_entrypc(dw_die, &tmp) == 0 ||
+		dwarf_attr(dw_die, DW_AT_ranges, &attr_mem) != NULL);
 }
+
 /**
  * die_get_data_member_location - Get the data-member offset
  * @mb_die: a DIE of a member of a data structure
-- 
2.20.1

[PATCH AUTOSEL 4.14 083/130] perf probe: Fix to list probe event with correct line number

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 3895534dd78f0fd4d3f9e05ee52b9cdd444a743e ]

Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the
entry address of the function on which a probe is, it will fail when the
function DIE has only ranges attribute.

To fix this issue, use die_entrypc() instead of dwarf_entrypc().

Without this fix, perf probe -l shows incorrect offset:

  # perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c)
    probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c)

With this:

  # perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c)
    probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c)

Committer testing:

Before:

  [root@quaco ~]# perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c)
  [root@quaco ~]#

After:

  [root@quaco ~]# perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
  [root@quaco ~]#

Fixes: 1d46ea2a6a40 ("perf probe: Fix listing incorrect line number with inline function")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199321227.8075.14655572419136993015.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index a5731de0e5ebc..5fee71e960a61 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1570,7 +1570,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr,
 		/* Get function entry information */
 		func = basefunc = dwarf_diename(&spdie);
 		if (!func ||
-		    dwarf_entrypc(&spdie, &baseaddr) != 0 ||
+		    die_entrypc(&spdie, &baseaddr) != 0 ||
 		    dwarf_decl_line(&spdie, &baseline) != 0) {
 			lineno = 0;
 			goto post;
@@ -1587,7 +1587,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr,
 		while (die_find_top_inlinefunc(&spdie, (Dwarf_Addr)addr,
 						&indie)) {
 			/* There is an inline function */
-			if (dwarf_entrypc(&indie, &_addr) == 0 &&
+			if (die_entrypc(&indie, &_addr) == 0 &&
 			    _addr == addr) {
 				/*
 				 * addr is at an inline function entry.
-- 
2.20.1

[PATCH AUTOSEL 4.14 084/130] perf probe: Walk function lines in lexical blocks

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit acb6a7047ac2146b723fef69ee1ab6b7143546bf ]

Since some inlined functions are in lexical blocks of given function, we
have to recursively walk through the DIE tree.  Without this fix,
perf-probe -L can miss the inlined functions which is in a lexical block
(like if (..) { func() } case.)

However, even though, to walk the lines in a given function, we don't
need to follow the children DIE of inlined functions because those do
not have any lines in the specified function.

We need to walk though whole trees only if we walk all lines in a given
file, because an inlined function can include another inlined function
in the same file.

Fixes: b0e9cb2802d4 ("perf probe: Fix to search nested inlined functions in CU")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190836514.1859.15996864849678136353.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index bc52b38407066..e5406e5adb68c 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -691,10 +691,9 @@ static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data)
 			if (lw->retval != 0)
 				return DIE_FIND_CB_END;
 		}
+		if (!lw->recursive)
+			return DIE_FIND_CB_SIBLING;
 	}
-	if (!lw->recursive)
-		/* Don't need to search recursively */
-		return DIE_FIND_CB_SIBLING;
 
 	if (addr) {
 		fname = dwarf_decl_file(in_die);
@@ -741,6 +740,10 @@ static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data)
 {
 	struct __line_walk_param *lw = data;
 
+	/*
+	 * Since inlined function can include another inlined function in
+	 * the same file, we need to walk in it recursively.
+	 */
 	lw->retval = __die_walk_funclines(sp_die, true, lw->callback, lw->data);
 	if (lw->retval != 0)
 		return DWARF_CB_ABORT;
@@ -830,8 +833,9 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 	 */
 	if (rt_die != cu_die)
 		/*
-		 * Don't need walk functions recursively, because nested
-		 * inlined functions don't have lines of the specified DIE.
+		 * Don't need walk inlined functions recursively, because
+		 * inner inlined functions don't have the lines of the
+		 * specified function.
 		 */
 		ret = __die_walk_funclines(rt_die, false, callback, data);
 	else {
-- 
2.20.1

[PATCH AUTOSEL 4.14 085/130] perf probe: Fix to probe an inline function which has no entry pc

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit eb6933b29d20bf2c3053883d409a53f462c1a3ac ]

Fix perf probe to probe an inlne function which has no entry pc
or low pc but only has ranges attribute.

This seems very rare case, but I could find a few examples, as
same as probe_point_search_cb(), use die_entrypc() to get the
entry address in probe_point_inline_cb() too.

Without this patch:

  # perf probe -D __amd_put_nb_event_constraints
  Failed to get entry address of __amd_put_nb_event_constraints.
  Probe point '__amd_put_nb_event_constraints' not found.
    Error: Failed to add events.

With this patch:

  # perf probe -D __amd_put_nb_event_constraints
  p:probe/__amd_put_nb_event_constraints amd_put_event_constraints+43

Committer testing:

Before:

  [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints
  Failed to get entry address of __amd_put_nb_event_constraints.
  Probe point '__amd_put_nb_event_constraints' not found.
    Error: Failed to add events.
  [root@quaco ~]#

After:

  [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints
  p:probe/__amd_put_nb_event_constraints _text+33789
  [root@quaco ~]#

Fixes: 4ea42b181434 ("perf: Add perf probe subcommand, a kprobe-event setup helper")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199320336.8075.16189530425277588587.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 5fee71e960a61..b06b05bd488e2 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -953,7 +953,7 @@ static int probe_point_inline_cb(Dwarf_Die *in_die, void *data)
 		ret = find_probe_point_lazy(in_die, pf);
 	else {
 		/* Get probe address */
-		if (dwarf_entrypc(in_die, &addr) != 0) {
+		if (die_entrypc(in_die, &addr) != 0) {
 			pr_warning("Failed to get entry address of %s.\n",
 				   dwarf_diename(in_die));
 			return -ENOENT;
-- 
2.20.1

[PATCH AUTOSEL 4.14 086/130] perf probe: Fix to show ranges of variables in functions without entry_pc

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit af04dd2f8ebaa8fbd46f698714acbf43da14da45 ]

Fix to show ranges of variables (--range and --vars option) in functions
which DIE has only ranges but no entry_pc attribute.

Without this fix:

  # perf probe --range -V clear_tasks_mm_cpumask
  Available variables at clear_tasks_mm_cpumask
  	@<clear_tasks_mm_cpumask+0>
  		(No matched variables)

With this fix:

  # perf probe --range -V clear_tasks_mm_cpumask
  Available variables at clear_tasks_mm_cpumask
	@<clear_tasks_mm_cpumask+0>
		[VAL]	int	cpu	@<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]>

Committer testing:

Before:

  [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
  Available variables at clear_tasks_mm_cpumask
          @<clear_tasks_mm_cpumask+0>
                  (No matched variables)
  [root@quaco ~]#

After:

  [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
  Available variables at clear_tasks_mm_cpumask
          @<clear_tasks_mm_cpumask+0>
                  [VAL]   int     cpu     @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]>
  [root@quaco ~]#

Using it:

  [root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu
  Added new event:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

  [root@quaco ~]# perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu)
  [root@quaco ~]#
  [root@quaco ~]# perf trace -e probe:*cpumask
  ^C[root@quaco ~]#

Fixes: 349e8d261131 ("perf probe: Add --range option to show a variable's location range")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199323018.8075.8179744380479673672.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index e5406e5adb68c..21c2ed42ad6b7 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -1010,7 +1010,7 @@ static int die_get_var_innermost_scope(Dwarf_Die *sp_die, Dwarf_Die *vr_die,
 	bool first = true;
 	const char *name;
 
-	ret = dwarf_entrypc(sp_die, &entry);
+	ret = die_entrypc(sp_die, &entry);
 	if (ret)
 		return ret;
 
@@ -1073,7 +1073,7 @@ int die_get_var_range(Dwarf_Die *sp_die, Dwarf_Die *vr_die, struct strbuf *buf)
 	bool first = true;
 	const char *name;
 
-	ret = dwarf_entrypc(sp_die, &entry);
+	ret = die_entrypc(sp_die, &entry);
 	if (ret)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 087/130] perf probe: Fix to show inlined function callsite without entry_pc

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 18e21eb671dc87a4f0546ba505a89ea93598a634 ]

Fix 'perf probe --line' option to show inlined function callsite lines
even if the function DIE has only ranges.

Without this:

  # perf probe -L amd_put_event_constraints
  ...
      2  {
      3         if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw))
                        __amd_put_nb_event_constraints(cpuc, event);
      5  }

With this patch:

  # perf probe -L amd_put_event_constraints
  ...
      2  {
      3         if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw))
      4                 __amd_put_nb_event_constraints(cpuc, event);
      5  }

Committer testing:

Before:

  [root@quaco ~]# perf probe -L amd_put_event_constraints
  <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0>
        0  static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
                                                struct perf_event *event)
        2  {
        3         if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw))
                          __amd_put_nb_event_constraints(cpuc, event);
        5  }

           PMU_FORMAT_ATTR(event, "config:0-7,32-35");
           PMU_FORMAT_ATTR(umask, "config:8-15"   );

  [root@quaco ~]#

After:

  [root@quaco ~]# perf probe -L amd_put_event_constraints
  <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0>
        0  static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
                                                struct perf_event *event)
        2  {
        3         if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw))
        4                 __amd_put_nb_event_constraints(cpuc, event);
        5  }

           PMU_FORMAT_ATTR(event, "config:0-7,32-35");
           PMU_FORMAT_ATTR(umask, "config:8-15"   );

  [root@quaco ~]# perf probe amd_put_event_constraints:4
  Added new event:
    probe:amd_put_event_constraints (on amd_put_event_constraints:4)

  You can now use it in all perf tools, such as:

  	perf record -e probe:amd_put_event_constraints -aR sleep 1

  [root@quaco ~]#

  [root@quaco ~]# perf probe -l
    probe:amd_put_event_constraints (on amd_put_event_constraints:4@arch/x86/events/amd/core.c)
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
  [root@quaco ~]#

Using it:

  [root@quaco ~]# perf trace -e probe:*
  ^C[root@quaco ~]#

Ok, Intel system here... :-)

Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199322107.8075.12659099000567865708.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index 21c2ed42ad6b7..0a5de865563cf 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -686,7 +686,7 @@ static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data)
 	if (dwarf_tag(in_die) == DW_TAG_inlined_subroutine) {
 		fname = die_get_call_file(in_die);
 		lineno = die_get_call_lineno(in_die);
-		if (fname && lineno > 0 && dwarf_entrypc(in_die, &addr) == 0) {
+		if (fname && lineno > 0 && die_entrypc(in_die, &addr) == 0) {
 			lw->retval = lw->callback(fname, lineno, addr, lw->data);
 			if (lw->retval != 0)
 				return DIE_FIND_CB_END;
-- 
2.20.1

[PATCH AUTOSEL 4.14 088/130] libsubcmd: Use -O0 with DEBUG=1

[Sasha Levin]

From: James Clark <James.Clark@arm.com>

[ Upstream commit 22bd8f1b5a1dd168ba4eba27cb17643a11012f5d ]

When a 'make DEBUG=1' build is done, the command parser is still built
with -O6 and is hard to step through, fix it making it use -O0 in that
case.

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: nd <nd@arm.com>
Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/subcmd/Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile
index 5b2cd5e58df09..5dbb0dde208c4 100644
--- a/tools/lib/subcmd/Makefile
+++ b/tools/lib/subcmd/Makefile
@@ -28,7 +28,9 @@ ifeq ($(DEBUG),0)
   endif
 endif
 
-ifeq ($(CC_NO_CLANG), 0)
+ifeq ($(DEBUG),1)
+  CFLAGS += -O0
+else ifeq ($(CC_NO_CLANG), 0)
   CFLAGS += -O3
 else
   CFLAGS += -O6
-- 
2.20.1

[PATCH AUTOSEL 4.14 089/130] perf probe: Fix to probe a function which has no entry pc

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5d16dbcc311d91267ddb45c6da4f187be320ecee ]

Fix 'perf probe' to probe a function which has no entry pc or low pc but
only has ranges attribute.

probe_point_search_cb() uses dwarf_entrypc() to get the probe address,
but that doesn't work for the function DIE which has only ranges
attribute. Use die_entrypc() instead.

Without this fix:

  # perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0
  Probe point 'clear_tasks_mm_cpumask' not found.
    Error: Failed to add events.

With this:

  # perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0
  p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0

Committer testing:

Before:

  [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
  Probe point 'clear_tasks_mm_cpumask' not found.
    Error: Failed to add events.
  [root@quaco ~]#

After:

  [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
  Added new event:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

  [root@quaco ~]#

Using it with 'perf trace':

  [root@quaco ~]# perf trace -e probe:clear_tasks_mm_cpumask

Doesn't seem to be used in x86_64:

  $ find . -name "*.c" | xargs grep clear_tasks_mm_cpumask
  ./kernel/cpu.c: * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
  ./kernel/cpu.c:void clear_tasks_mm_cpumask(int cpu)
  ./arch/xtensa/kernel/smp.c:	clear_tasks_mm_cpumask(cpu);
  ./arch/csky/kernel/smp.c:	clear_tasks_mm_cpumask(cpu);
  ./arch/sh/kernel/smp.c:	clear_tasks_mm_cpumask(cpu);
  ./arch/arm/kernel/smp.c:	clear_tasks_mm_cpumask(cpu);
  ./arch/powerpc/mm/nohash/mmu_context.c:	clear_tasks_mm_cpumask(cpu);
  $ find . -name "*.h" | xargs grep clear_tasks_mm_cpumask
  ./include/linux/cpu.h:void clear_tasks_mm_cpumask(int cpu);
  $ find . -name "*.S" | xargs grep clear_tasks_mm_cpumask
  $

Fixes: e1ecbbc3fa83 ("perf probe: Fix to handle optimized not-inlined functions")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157199319438.8075.4695576954550638618.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index b06b05bd488e2..aa6b357269761 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1005,7 +1005,7 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 		param->retval = find_probe_point_by_line(pf);
 	} else if (die_is_func_instance(sp_die)) {
 		/* Instances always have the entry address */
-		dwarf_entrypc(sp_die, &pf->addr);
+		die_entrypc(sp_die, &pf->addr);
 		/* But in some case the entry address is 0 */
 		if (pf->addr == 0) {
 			pr_debug("%s has no entry PC. Skipped\n",
-- 
2.20.1

[PATCH AUTOSEL 4.14 090/130] drm/amdgpu: fix potential double drop fence reference

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 946ab8db6953535a3a88c957db8328beacdfed9d ]

The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_test.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
index ed8c3739015be..b35b0741fd97e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c
@@ -125,6 +125,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev)
 		}
 
 		dma_fence_put(fence);
+		fence = NULL;
 
 		r = amdgpu_bo_kmap(vram_obj, &vram_map);
 		if (r) {
@@ -170,6 +171,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev)
 		}
 
 		dma_fence_put(fence);
+		fence = NULL;
 
 		r = amdgpu_bo_kmap(gtt_obj[i], &gtt_map);
 		if (r) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 091/130] perf parse: If pmu configuration fails free terms

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 38f2c4226e6bc3e8c41c318242821ba5dc825aba ]

Avoid a memory leak when the configuration fails.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 29e2bb304168c..096c52f296d77 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1253,8 +1253,15 @@ static int __parse_events_add_pmu(struct parse_events_state *parse_state,
 	if (get_config_terms(head_config, &config_terms))
 		return -ENOMEM;
 
-	if (perf_pmu__config(pmu, &attr, head_config, parse_state->error))
+	if (perf_pmu__config(pmu, &attr, head_config, parse_state->error)) {
+		struct perf_evsel_config_term *pos, *tmp;
+
+		list_for_each_entry_safe(pos, tmp, &config_terms, list) {
+			list_del_init(&pos->list);
+			free(pos);
+		}
 		return -EINVAL;
+	}
 
 	evsel = __add_event(list, &parse_state->idx, &attr,
 			    get_config_name(head_config), pmu,
-- 
2.20.1

[PATCH AUTOSEL 4.14 092/130] perf probe: Skip overlapped location on searching variables

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit dee36a2abb67c175265d49b9a8c7dfa564463d9a ]

Since debuginfo__find_probes() callback function can be called with  the
location which already passed, the callback function must filter out
such overlapped locations.

add_probe_trace_event() has already done it by commit 1a375ae7659a
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:

  # perf probe -V vfs_read:18
  Available variables at vfs_read:18
          @<vfs_read+217>
                  char*   buf
                  loff_t* pos
                  ssize_t ret
                  struct file*    file
          @<vfs_read+217>
                  char*   buf
                  loff_t* pos
                  ssize_t ret
                  struct file*    file
          @<vfs_read+226>
                  char*   buf
                  loff_t* pos
                  ssize_t ret
                  struct file*    file

With this fix, perf probe -V shows it correctly:

  # perf probe -V vfs_read:18
  Available variables at vfs_read:18
          @<vfs_read+217>
                  char*   buf
                  loff_t* pos
                  ssize_t ret
                  struct file*    file
          @<vfs_read+226>
                  char*   buf
                  loff_t* pos
                  ssize_t ret
                  struct file*    file

Fixes: cf6eb489e5c0 ("perf probe: Show accessible local variables")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index aa6b357269761..e1d0bbf7735bd 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1417,6 +1417,18 @@ static int collect_variables_cb(Dwarf_Die *die_mem, void *data)
 	return DIE_FIND_CB_END;
 }
 
+static bool available_var_finder_overlap(struct available_var_finder *af)
+{
+	int i;
+
+	for (i = 0; i < af->nvls; i++) {
+		if (af->pf.addr == af->vls[i].point.address)
+			return true;
+	}
+	return false;
+
+}
+
 /* Add a found vars into available variables list */
 static int add_available_vars(Dwarf_Die *sc_die, struct probe_finder *pf)
 {
@@ -1427,6 +1439,14 @@ static int add_available_vars(Dwarf_Die *sc_die, struct probe_finder *pf)
 	Dwarf_Die die_mem;
 	int ret;
 
+	/*
+	 * For some reason (e.g. different column assigned to same address),
+	 * this callback can be called with the address which already passed.
+	 * Ignore it first.
+	 */
+	if (available_var_finder_overlap(af))
+		return 0;
+
 	/* Check number of tevs */
 	if (af->nvls == af->max_vls) {
 		pr_warning("Too many( > %d) probe point found.\n", af->max_vls);
-- 
2.20.1

[PATCH AUTOSEL 4.14 093/130] perf probe: Return a better scope DIE if there is no best scope

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit c701636aeec4c173208697d68da6e4271125564b ]

Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.

Without this, sometimes perf probe failed to probe on a line inside an
inlined function:

  # perf probe -D ksys_open:3
  Failed to find scope of probe point.
    Error: Failed to add events.

With this fix, 'perf probe' can probe it:

  # perf probe -D ksys_open:3
  p:probe/ksys_open _text+25707308
  p:probe/ksys_open_1 _text+25710596
  p:probe/ksys_open_2 _text+25711114
  p:probe/ksys_open_3 _text+25711343
  p:probe/ksys_open_4 _text+25714058
  p:probe/ksys_open_5 _text+2819653
  p:probe/ksys_open_6 _text+2819701

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index e1d0bbf7735bd..30a5e92b67bd3 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -767,6 +767,16 @@ static int find_best_scope_cb(Dwarf_Die *fn_die, void *data)
 	return 0;
 }
 
+/* Return innermost DIE */
+static int find_inner_scope_cb(Dwarf_Die *fn_die, void *data)
+{
+	struct find_scope_param *fsp = data;
+
+	memcpy(fsp->die_mem, fn_die, sizeof(Dwarf_Die));
+	fsp->found = true;
+	return 1;
+}
+
 /* Find an appropriate scope fits to given conditions */
 static Dwarf_Die *find_best_scope(struct probe_finder *pf, Dwarf_Die *die_mem)
 {
@@ -778,8 +788,13 @@ static Dwarf_Die *find_best_scope(struct probe_finder *pf, Dwarf_Die *die_mem)
 		.die_mem = die_mem,
 		.found = false,
 	};
+	int ret;
 
-	cu_walk_functions_at(&pf->cu_die, pf->addr, find_best_scope_cb, &fsp);
+	ret = cu_walk_functions_at(&pf->cu_die, pf->addr, find_best_scope_cb,
+				   &fsp);
+	if (!ret && !fsp.found)
+		cu_walk_functions_at(&pf->cu_die, pf->addr,
+				     find_inner_scope_cb, &fsp);
 
 	return fsp.found ? die_mem : NULL;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 094/130] perf probe: Fix to show calling lines of inlined functions

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 86c0bf8539e7f46d91bd105e55eda96e0064caef ]

Fix to show calling lines of inlined functions (where an inline function
is called).

die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.

To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.

Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)

  # perf probe -L vfs_read
  <vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
        0  ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
        1  {
        2         ssize_t ret;

        4         if (!(file->f_mode & FMODE_READ))
                          return -EBADF;
        6         if (!(file->f_mode & FMODE_CAN_READ))
                          return -EINVAL;
        8         if (unlikely(!access_ok(buf, count)))
                          return -EFAULT;

       11         ret = rw_verify_area(READ, file, pos, count);
       12         if (!ret) {
       13                 if (count > MAX_RW_COUNT)
                                  count =  MAX_RW_COUNT;
       15                 ret = __vfs_read(file, buf, count, pos);
       16                 if (ret > 0) {
                                  fsnotify_access(file);
                                  add_rchar(current, ret);
                          }

With this fix:

  # perf probe -L vfs_read
  <vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
        0  ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
        1  {
        2         ssize_t ret;

        4         if (!(file->f_mode & FMODE_READ))
                          return -EBADF;
        6         if (!(file->f_mode & FMODE_CAN_READ))
                          return -EINVAL;
        8         if (unlikely(!access_ok(buf, count)))
                          return -EFAULT;

       11         ret = rw_verify_area(READ, file, pos, count);
       12         if (!ret) {
       13                 if (count > MAX_RW_COUNT)
                                  count =  MAX_RW_COUNT;
       15                 ret = __vfs_read(file, buf, count, pos);
       16                 if (ret > 0) {
       17                         fsnotify_access(file);
       18                         add_rchar(current, ret);
                          }
       20                 inc_syscr(current);
                  }

Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937995.32002.17899884017011512577.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index 0a5de865563cf..49f9c65f1a9c1 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -768,7 +768,7 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 	Dwarf_Lines *lines;
 	Dwarf_Line *line;
 	Dwarf_Addr addr;
-	const char *fname, *decf = NULL;
+	const char *fname, *decf = NULL, *inf = NULL;
 	int lineno, ret = 0;
 	int decl = 0, inl;
 	Dwarf_Die die_mem, *cu_die;
@@ -812,13 +812,21 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 			 */
 			if (!dwarf_haspc(rt_die, addr))
 				continue;
+
 			if (die_find_inlinefunc(rt_die, addr, &die_mem)) {
+				/* Call-site check */
+				inf = die_get_call_file(&die_mem);
+				if ((inf && !strcmp(inf, decf)) &&
+				    die_get_call_lineno(&die_mem) == lineno)
+					goto found;
+
 				dwarf_decl_line(&die_mem, &inl);
 				if (inl != decl ||
 				    decf != dwarf_decl_file(&die_mem))
 					continue;
 			}
 		}
+found:
 		/* Get source line */
 		fname = dwarf_linesrc(line, NULL, NULL);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 095/130] perf probe: Skip end-of-sequence and non statement lines

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit f4d99bdfd124823a81878b44b5e8750b97f73902 ]

Skip end-of-sequence and non-statement lines while walking through lines
list.

The "end-of-sequence" line information means:

 "the current address is that of the first byte after the
  end of a sequence of target machine instructions."
 (DWARF version 4 spec 6.2.2)

This actually means out of scope and we can not probe on it.

On the other hand, the statement lines (is_stmt) means:

 "the current instruction is a recommended breakpoint location.
  A recommended breakpoint location is intended to “represent”
  a line, a statement and/or a semantically distinct subpart
  of a statement."

 (DWARF version 4 spec 6.2.2)

So, non-statement line info also should be skipped.

These can reduce unneeded probe points and also avoid an error.

E.g. without this patch:

  # perf probe -a "clear_tasks_mm_cpumask:1"
  Added new events:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1

  #

This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.

With this patch:

  # perf probe -a "clear_tasks_mm_cpumask:1"
  Added new event:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

  #

Now perf-probe skips unneeded addresses.

Committer testing:

Slightly different results, but similar:

Before:

  # uname -a
  Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
  #
  # perf probe -a "clear_tasks_mm_cpumask:1"
  Added new events:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
    probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1

  #

After:

  # perf probe -a "clear_tasks_mm_cpumask:1"
  Added new event:
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)

  You can now use it in all perf tools, such as:

  	perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

  # perf probe -l
    probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
  #

Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index 49f9c65f1a9c1..d48bd5eaa0f2a 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -773,6 +773,7 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 	int decl = 0, inl;
 	Dwarf_Die die_mem, *cu_die;
 	size_t nlines, i;
+	bool flag;
 
 	/* Get the CU die */
 	if (dwarf_tag(rt_die) != DW_TAG_compile_unit) {
@@ -803,6 +804,12 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
 				  "Possible error in debuginfo.\n");
 			continue;
 		}
+		/* Skip end-of-sequence */
+		if (dwarf_lineendsequence(line, &flag) != 0 || flag)
+			continue;
+		/* Skip Non statement line-info */
+		if (dwarf_linebeginstatement(line, &flag) != 0 || !flag)
+			continue;
 		/* Filter lines based on address */
 		if (rt_die != cu_die) {
 			/*
-- 
2.20.1

[PATCH AUTOSEL 4.14 096/130] perf probe: Filter out instances except for inlined subroutine and subprogram

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit da6cb952a89efe24bb76c4971370d485737a2d85 ]

Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().

This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.

When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.

Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):

  # perf probe -D vfs_read
  p:probe/vfs_read _text+2500017
  p:probe/vfs_read_1 _text+2499468
  p:probe/vfs_read_2 _text+2499563
  p:probe/vfs_read_3 _text+2498876
  p:probe/vfs_read_4 _text+2498512
  p:probe/vfs_read_5 _text+2498627

With this patch:

Slightly different results, similar tho:

  # perf probe -D vfs_read
  p:probe/vfs_read _text+2498512

Committer testing:

  # uname -a
  Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

Before:

  # perf probe -D vfs_read
  p:probe/vfs_read _text+3131557
  p:probe/vfs_read_1 _text+3130975
  p:probe/vfs_read_2 _text+3131047
  p:probe/vfs_read_3 _text+3130380
  p:probe/vfs_read_4 _text+3130000
  # uname -a
  Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
  #

After:

  # perf probe -D vfs_read
  p:probe/vfs_read _text+3130000
  #

Fixes: db0d2c6420ee ("perf probe: Search concrete out-of-line instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/dwarf-aux.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
index d48bd5eaa0f2a..50903f30289f2 100644
--- a/tools/perf/util/dwarf-aux.c
+++ b/tools/perf/util/dwarf-aux.c
@@ -325,18 +325,22 @@ bool die_is_func_def(Dwarf_Die *dw_die)
  * @dw_die: a DIE
  *
  * Ensure that this DIE is an instance (which has an entry address).
- * This returns true if @dw_die is a function instance. If not, you need to
- * call die_walk_instances() to find actual instances.
+ * This returns true if @dw_die is a function instance. If not, the @dw_die
+ * must be a prototype. You can use die_walk_instances() to find actual
+ * instances.
  **/
 bool die_is_func_instance(Dwarf_Die *dw_die)
 {
 	Dwarf_Addr tmp;
 	Dwarf_Attribute attr_mem;
+	int tag = dwarf_tag(dw_die);
 
-	/* Actually gcc optimizes non-inline as like as inlined */
-	return !dwarf_func_inline(dw_die) &&
-	       (dwarf_entrypc(dw_die, &tmp) == 0 ||
-		dwarf_attr(dw_die, DW_AT_ranges, &attr_mem) != NULL);
+	if (tag != DW_TAG_subprogram &&
+	    tag != DW_TAG_inlined_subroutine)
+		return false;
+
+	return dwarf_entrypc(dw_die, &tmp) == 0 ||
+		dwarf_attr(dw_die, DW_AT_ranges, &attr_mem) != NULL;
 }
 
 /**
@@ -615,6 +619,9 @@ static int __die_walk_instances_cb(Dwarf_Die *inst, void *data)
 	Dwarf_Die *origin;
 	int tmp;
 
+	if (!die_is_func_instance(inst))
+		return DIE_FIND_CB_CONTINUE;
+
 	attr = dwarf_attr(inst, DW_AT_abstract_origin, &attr_mem);
 	if (attr == NULL)
 		return DIE_FIND_CB_CONTINUE;
-- 
2.20.1

[PATCH AUTOSEL 4.14 097/130] ath10k: fix get invalid tx rate for Mesh metric

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ]

ath10k does not provide transmit rate info per MSDU
in tx completion, mark that as -1 so mac80211
will ignore the rates. This fixes mac80211 update Mesh
link metric with invalid transmit rate info.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035

Signed-off-by: Hou Bao Hou <houbao@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index d4986f626c35c..9999c8c40269d 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -100,6 +100,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 
 	info = IEEE80211_SKB_CB(msdu);
 	memset(&info->status, 0, sizeof(info->status));
+	info->status.rates[0].idx = -1;
+
 	trace_ath10k_txrx_tx_unref(ar, tx_done->msdu_id);
 
 	if (tx_done->status == HTT_TX_COMPL_STATE_DISCARD) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 098/130] fsi: core: Fix small accesses and unaligned offsets via sysfs

[Sasha Levin]

From: Andrew Jeffery <andrew@aj.id.au>

[ Upstream commit 9f4c2b516b4f031e3cd0e45957f4150b3c1a083d ]

Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:

    offset  count | length
    --------------+-------
    0       1     | 1
    0       2     | 2
    0       3     | 2
    0       4     | 4
    0       5     | 4
    1       1     | 1
    1       2     | 1
    1       3     | 1
    1       4     | 1
    1       5     | 1
    2       1     | 1
    2       2     | 2
    2       3     | 2
    2       4     | 2
    2       5     | 2
    3       1     | 1
    3       2     | 1
    3       3     | 1
    3       4     | 1
    3       5     | 1

We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fsi/fsi-core.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4ea63d9bd1315..8feca59c1f6b0 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -419,6 +419,31 @@ static int fsi_slave_scan(struct fsi_slave *slave)
 	return 0;
 }
 
+static unsigned long aligned_access_size(size_t offset, size_t count)
+{
+	unsigned long offset_unit, count_unit;
+
+	/* Criteria:
+	 *
+	 * 1. Access size must be less than or equal to the maximum access
+	 *    width or the highest power-of-two factor of offset
+	 * 2. Access size must be less than or equal to the amount specified by
+	 *    count
+	 *
+	 * The access width is optimal if we can calculate 1 to be strictly
+	 * equal while still satisfying 2.
+	 */
+
+	/* Find 1 by the bottom bit of offset (with a 4 byte access cap) */
+	offset_unit = BIT(__builtin_ctzl(offset | 4));
+
+	/* Find 2 by the top bit of count */
+	count_unit = BIT(8 * sizeof(unsigned long) - 1 - __builtin_clzl(count));
+
+	/* Constrain the maximum access width to the minimum of both criteria */
+	return BIT(__builtin_ctzl(offset_unit | count_unit));
+}
+
 static ssize_t fsi_slave_sysfs_raw_read(struct file *file,
 		struct kobject *kobj, struct bin_attribute *attr, char *buf,
 		loff_t off, size_t count)
@@ -434,8 +459,7 @@ static ssize_t fsi_slave_sysfs_raw_read(struct file *file,
 		return -EINVAL;
 
 	for (total_len = 0; total_len < count; total_len += read_len) {
-		read_len = min_t(size_t, count, 4);
-		read_len -= off & 0x3;
+		read_len = aligned_access_size(off, count - total_len);
 
 		rc = fsi_slave_read(slave, off, buf + total_len, read_len);
 		if (rc)
@@ -462,8 +486,7 @@ static ssize_t fsi_slave_sysfs_raw_write(struct file *file,
 		return -EINVAL;
 
 	for (total_len = 0; total_len < count; total_len += write_len) {
-		write_len = min_t(size_t, count, 4);
-		write_len -= off & 0x3;
+		write_len = aligned_access_size(off, count - total_len);
 
 		rc = fsi_slave_write(slave, off, buf + total_len, write_len);
 		if (rc)
-- 
2.20.1

[PATCH AUTOSEL 4.14 099/130] media: pvrusb2: Fix oops on tear-down when radio support is not present

[Sasha Levin]

From: Mike Isely <isely@pobox.com>

[ Upstream commit 7f404ae9cf2a285f73b3c18ab9303d54b7a3d8e1 ]

In some device configurations there's no radio or radio support in the
driver.  That's OK, as the driver sets itself up accordingly.  However
on tear-down in these caes it's still trying to tear down radio
related context when there isn't anything there, leading to
dereferences through a null pointer and chaos follows.

How this bug survived unfixed for 11 years in the pvrusb2 driver is a
mystery to me.

[hverkuil: fix two checkpatch warnings]

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index 4320bda9352df..e0413db267816 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -915,8 +915,12 @@ static void pvr2_v4l2_internal_check(struct pvr2_channel *chp)
 	pvr2_v4l2_dev_disassociate_parent(vp->dev_video);
 	pvr2_v4l2_dev_disassociate_parent(vp->dev_radio);
 	if (!list_empty(&vp->dev_video->devbase.fh_list) ||
-	    !list_empty(&vp->dev_radio->devbase.fh_list))
+	    (vp->dev_radio &&
+	     !list_empty(&vp->dev_radio->devbase.fh_list))) {
+		pvr2_trace(PVR2_TRACE_STRUCT,
+			   "pvr2_v4l2 internal_check exit-empty id=%p", vp);
 		return;
+	}
 	pvr2_v4l2_destroy_no_lock(vp);
 }
 
@@ -990,7 +994,8 @@ static int pvr2_v4l2_release(struct file *file)
 	kfree(fhp);
 	if (vp->channel.mc_head->disconnect_flag &&
 	    list_empty(&vp->dev_video->devbase.fh_list) &&
-	    list_empty(&vp->dev_radio->devbase.fh_list)) {
+	    (!vp->dev_radio ||
+	     list_empty(&vp->dev_radio->devbase.fh_list))) {
 		pvr2_v4l2_destroy_no_lock(vp);
 	}
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 100/130] media: si470x-i2c: add missed operations in remove

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 2df200ab234a86836a8879a05a8007d6b884eb14 ]

The driver misses calling v4l2_ctrl_handler_free and
v4l2_device_unregister in remove like what is done in probe failure.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/si470x/radio-si470x-i2c.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index 8ce6f9cff7463..b60fb6ed5aeb5 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -455,6 +455,8 @@ static int si470x_i2c_remove(struct i2c_client *client)
 	video_unregister_device(&radio->videodev);
 	kfree(radio);
 
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 101/130] EDAC/ghes: Fix grain calculation

[Sasha Levin]

From: Robert Richter <rrichter@marvell.com>

[ Upstream commit 7088e29e0423d3195e09079b4f849ec4837e5a75 ]

The current code to convert a physical address mask to a grain
(defined as granularity in bytes) is:

	e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);

This is broken in several ways:

1) It calculates to wrong grain values. E.g., a physical address mask
of ~0xfff should give a grain of 0x1000. Without considering
PAGE_MASK, there is an off-by-one. Things are worse when also
filtering it with ~PAGE_MASK. This will calculate to a grain with the
upper bits set. In the example it even calculates to ~0.

2) The grain does not depend on and is unrelated to the kernel's
page-size. The page-size only matters when unmapping memory in
memory_failure(). Smaller grains are wrongly rounded up to the
page-size, on architectures with a configurable page-size (e.g. arm64)
this could round up to the even bigger page-size of the hypervisor.

Fix this with:

	e->grain = ~mem_err->physical_addr_mask + 1;

The grain_bits are defined as:

	grain = 1 << grain_bits;

Change also the grain_bits calculation accordingly, it is the same
formula as in edac_mc.c now and the code can be unified.

The value in ->physical_addr_mask coming from firmware is assumed to
be contiguous, but this is not sanity-checked. However, in case the
mask is non-contiguous, a conversion to grain_bits effectively
converts the grain bit mask to a power of 2 by rounding it up.

Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/ghes_edac.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 6f80eb65c26ca..acae392786695 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -187,6 +187,7 @@ void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
 	/* Cleans the error report buffer */
 	memset(e, 0, sizeof (*e));
 	e->error_count = 1;
+	e->grain = 1;
 	strcpy(e->label, "unknown label");
 	e->msg = pvt->msg;
 	e->other_detail = pvt->other_detail;
@@ -282,7 +283,7 @@ void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
 
 	/* Error grain */
 	if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK)
-		e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);
+		e->grain = ~mem_err->physical_addr_mask + 1;
 
 	/* Memory error location, mapped on e->location */
 	p = e->location;
@@ -389,8 +390,13 @@ void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
 	if (p > pvt->other_detail)
 		*(p - 1) = '\0';
 
+	/* Sanity-check driver-supplied grain value. */
+	if (WARN_ON_ONCE(!e->grain))
+		e->grain = 1;
+
+	grain_bits = fls_long(e->grain - 1);
+
 	/* Generate the trace event */
-	grain_bits = fls_long(e->grain);
 	snprintf(pvt->detail_location, sizeof(pvt->detail_location),
 		 "APEI location: %s %s", e->location, e->other_detail);
 	trace_mc_event(type, e->msg, e->label, e->error_count,
-- 
2.20.1

[PATCH AUTOSEL 4.14 102/130] spi: pxa2xx: Add missed security checks

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ]

pxa2xx_spi_init_pdata misses checks for devm_clk_get and
platform_get_irq.
Add checks for them to fix the bugs.

Since ssp->clk and ssp->irq are used in probe, they are mandatory here.
So we cannot use _optional() for devm_clk_get and platform_get_irq.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 9bf3e5f945c75..b2245cdce230b 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1559,7 +1559,13 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
 	}
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return NULL;
+
 	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0)
+		return NULL;
+
 	ssp->type = type;
 	ssp->pdev = pdev;
 	ssp->port_id = pxa2xx_spi_get_port_id(adev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 103/130] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile

[Sasha Levin]

From: Ben Zhang <benzh@chromium.org>

[ Upstream commit eabf424f7b60246c76dcb0ea6f1e83ef9abbeaa6 ]

The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts.  However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.

Marking MX-64h as volatile in regmap solved the issue.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5677.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 1cd20b88a3a9c..82ee8f4b965be 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -297,6 +297,7 @@ static bool rt5677_volatile_register(struct device *dev, unsigned int reg)
 	case RT5677_I2C_MASTER_CTRL7:
 	case RT5677_I2C_MASTER_CTRL8:
 	case RT5677_HAP_GENE_CTRL2:
+	case RT5677_PWR_ANLG2: /* Modified by DSP firmware */
 	case RT5677_PWR_DSP_ST:
 	case RT5677_PRIV_DATA:
 	case RT5677_ASRC_22:
-- 
2.20.1

[PATCH AUTOSEL 4.14 104/130] ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint

[Sasha Levin]

From: Yu-Hsuan Hsu <yuhsuan@chromium.org>

[ Upstream commit e2db787bdcb4f2722ecf410168f0583764634e45 ]

On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 41cb1fefbd427..405196283688c 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -422,6 +422,9 @@ static int kabylake_dmic_startup(struct snd_pcm_substream *substream)
 	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
 			dmic_constraints);
 
+	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
+
 	return snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 105/130] s390/disassembler: don't hide instruction addresses

[Sasha Levin]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit 544f1d62e3e6c6e6d17a5e56f6139208acb5ff46 ]

Due to kptr_restrict, JITted BPF code is now displayed like this:

000000000b6ed1b2: ebdff0800024  stmg    %r13,%r15,128(%r15)
000000004cde2ba0: 41d0f040      la      %r13,64(%r15)
00000000fbad41b0: a7fbffa0      aghi    %r15,-96

Leaking kernel addresses to dmesg is not a concern in this case, because
this happens only when JIT debugging is explicitly activated, which only
root can do.

Use %px in this particular instance, and also to print an instruction
address in show_code and PCREL (e.g. brasl) arguments in print_insn.
While at present functionally equivalent to %016lx, %px is recommended
by Documentation/core-api/printk-formats.rst for such cases.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/dis.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 2394557653d57..6d154069c9623 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -1930,10 +1930,11 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 				ptr += sprintf(ptr, "%%c%i", value);
 			else if (operand->flags & OPERAND_VR)
 				ptr += sprintf(ptr, "%%v%i", value);
-			else if (operand->flags & OPERAND_PCREL)
-				ptr += sprintf(ptr, "%lx", (signed int) value
-								      + addr);
-			else if (operand->flags & OPERAND_SIGNED)
+			else if (operand->flags & OPERAND_PCREL) {
+				void *pcrel = (void *)((int)value + addr);
+
+				ptr += sprintf(ptr, "%px", pcrel);
+			} else if (operand->flags & OPERAND_SIGNED)
 				ptr += sprintf(ptr, "%i", value);
 			else
 				ptr += sprintf(ptr, "%u", value);
@@ -2005,7 +2006,7 @@ void show_code(struct pt_regs *regs)
 		else
 			*ptr++ = ' ';
 		addr = regs->psw.addr + start - 32;
-		ptr += sprintf(ptr, "%016lx: ", addr);
+		ptr += sprintf(ptr, "%px: ", (void *)addr);
 		if (start + opsize >= end)
 			break;
 		for (i = 0; i < opsize; i++)
@@ -2033,7 +2034,7 @@ void print_fn_code(unsigned char *code, unsigned long len)
 		opsize = insn_length(*code);
 		if (opsize > len)
 			break;
-		ptr += sprintf(ptr, "%p: ", code);
+		ptr += sprintf(ptr, "%px: ", code);
 		for (i = 0; i < opsize; i++)
 			ptr += sprintf(ptr, "%02x", code[i]);
 		*ptr++ = '\t';
-- 
2.20.1

[PATCH AUTOSEL 4.14 106/130] net: bcmgenet: Add RGMII_RXID support

[Sasha Levin]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit da38802211cc3fd294211a642932edb09e3af632 ]

This adds the missing support for the PHY mode RGMII_RXID.
It's necessary for the Raspberry Pi 4.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index fca9da1b13635..201cc533d0344 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -267,6 +267,11 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 		bcmgenet_sys_writel(priv,
 				    PORT_MODE_EXT_GPHY, SYS_PORT_CTRL);
 		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phy_name = "external RGMII (RX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
 	default:
 		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.14 107/130] parport: load lowlevel driver if ports not found

[Sasha Levin]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit 231ec2f24dad18d021b361045bbd618ba62a274e ]

Usually all the distro will load the parport low level driver as part
of their initialization. But we can get into a situation where all the
parallel port drivers are built as module and we unload all the modules
at a later time. Then if we just do "modprobe parport" it will only
load the parport module and will not load the low level driver which
will actually register the ports. So, check the bus if there is any
parport registered, if not, load the low level driver.

We can get into the above situation with all distro but only Suse has
setup the alias for "parport_lowlevel" and so it only works in Suse.
Users of Debian based distro will need to load the lowlevel module
manually.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parport/share.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 7b4ee33c19354..15c81cffd2de2 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -230,6 +230,18 @@ static int port_check(struct device *dev, void *dev_drv)
 	return 0;
 }
 
+/*
+ * Iterates through all the devices connected to the bus and return 1
+ * if the device is a parallel port.
+ */
+
+static int port_detect(struct device *dev, void *dev_drv)
+{
+	if (is_parport(dev))
+		return 1;
+	return 0;
+}
+
 /**
  *	parport_register_driver - register a parallel port device driver
  *	@drv: structure describing the driver
@@ -282,6 +294,15 @@ int __parport_register_driver(struct parport_driver *drv, struct module *owner,
 		if (ret)
 			return ret;
 
+		/*
+		 * check if bus has any parallel port registered, if
+		 * none is found then load the lowlevel driver.
+		 */
+		ret = bus_for_each_dev(&parport_bus_type, NULL, NULL,
+				       port_detect);
+		if (!ret)
+			get_lowlevel_driver();
+
 		mutex_lock(&registration_lock);
 		if (drv->match_port)
 			bus_for_each_dev(&parport_bus_type, NULL, drv,
-- 
2.20.1

[PATCH AUTOSEL 4.14 108/130] cpufreq: Register drivers only after CPU devices have been registered

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 46770be0cf94149ca48be87719bda1d951066644 ]

The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.

This happens due to following sequence of events:

- cpufreq_register_driver()
  - subsys_interface_register()
  - return 0; //successful registration of driver

... at a later point of time

- register_cpu();
  - device_register();
    - bus_probe_device();
      - sif->add_dev();
	- cpufreq_add_dev();
	  - get_cpu_device(); //FAILS
  - per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
  - return 0; //CPU registered successfully

Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.

This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 480e8c13567c8..c798a1233e6a0 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2475,6 +2475,13 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	if (cpufreq_disabled())
 		return -ENODEV;
 
+	/*
+	 * The cpufreq core depends heavily on the availability of device
+	 * structure, make sure they are available before proceeding further.
+	 */
+	if (!get_cpu_device(0))
+		return -EPROBE_DEFER;
+
 	if (!driver_data || !driver_data->verify || !driver_data->init ||
 	    !(driver_data->setpolicy || driver_data->target_index ||
 		    driver_data->target) ||
-- 
2.20.1

[PATCH AUTOSEL 4.14 109/130] x86/crash: Add a forward declaration of struct kimage

[Sasha Levin]

From: Lianbo Jiang <lijiang@redhat.com>

[ Upstream commit 112eee5d06007dae561f14458bde7f2a4879ef4e ]

Add a forward declaration of struct kimage to the crash.h header because
future changes will invoke a crash-specific function from the realmode
init path and the compiler will complain otherwise like this:

  In file included from arch/x86/realmode/init.c:11:
  ./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\
   parameter list will not be visible outside of this definition or declaration
      5 | int crash_load_segments(struct kimage *image);
        |                                ^~~~~~
  ./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\
   parameter list will not be visible outside of this definition or declaration
      6 | int crash_copy_backup_region(struct kimage *image);
        |                                     ^~~~~~
  ./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\
   parameter list will not be visible outside of this definition or declaration
      7 | int crash_setup_memmap_entries(struct kimage *image,
        |

 [ bp: Rewrite the commit message. ]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com
Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/crash.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/include/asm/crash.h b/arch/x86/include/asm/crash.h
index a7adb2bfbf0b8..6b8ad6fa3979a 100644
--- a/arch/x86/include/asm/crash.h
+++ b/arch/x86/include/asm/crash.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_X86_CRASH_H
 #define _ASM_X86_CRASH_H
 
+struct kimage;
+
 int crash_load_segments(struct kimage *image);
 int crash_copy_backup_region(struct kimage *image);
 int crash_setup_memmap_entries(struct kimage *image,
-- 
2.20.1

[PATCH AUTOSEL 4.14 110/130] RDMA/qib: Validate ->show()/store() callbacks before calling them

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 7ee23491b39259ae83899dd93b2a29ef0f22f0a7 ]

The permissions of the read-only or write-only sysfs files can be
changed (as root) and the user can then try to read a write-only file or
write to a read-only file which will lead to kernel crash here.

Protect against that by always validating the show/store callbacks.

Link: https://lore.kernel.org/r/d45cc26361a174ae12dbb86c994ef334d257924b.1573096807.git.viresh.kumar@linaro.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qib/qib_sysfs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index ca2638d8f35ef..d831f3e61ae8f 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -301,6 +301,9 @@ static ssize_t qib_portattr_show(struct kobject *kobj,
 	struct qib_pportdata *ppd =
 		container_of(kobj, struct qib_pportdata, pport_kobj);
 
+	if (!pattr->show)
+		return -EIO;
+
 	return pattr->show(ppd, buf);
 }
 
@@ -312,6 +315,9 @@ static ssize_t qib_portattr_store(struct kobject *kobj,
 	struct qib_pportdata *ppd =
 		container_of(kobj, struct qib_pportdata, pport_kobj);
 
+	if (!pattr->store)
+		return -EIO;
+
 	return pattr->store(ppd, buf, len);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 111/130] iwlwifi: mvm: fix unaligned read of rx_pkt_status

[Sasha Levin]

From: Wang Xuerui <wangxuerui@qiniu.com>

[ Upstream commit c5aaa8be29b25dfe1731e9a8b19fd91b7b789ee3 ]

This is present since the introduction of iwlmvm.
Example stack trace on MIPS:

[<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm]
[<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi]

Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the
problem. No other unaligned accesses are spotted yet.

Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
index c73e4be9bde3f..c31303d13069a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
@@ -62,6 +62,7 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *****************************************************************************/
+#include <asm/unaligned.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include "iwl-trans.h"
@@ -290,7 +291,7 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi,
 	rx_res = (struct iwl_rx_mpdu_res_start *)pkt->data;
 	hdr = (struct ieee80211_hdr *)(pkt->data + sizeof(*rx_res));
 	len = le16_to_cpu(rx_res->byte_count);
-	rx_pkt_status = le32_to_cpup((__le32 *)
+	rx_pkt_status = get_unaligned_le32((__le32 *)
 		(pkt->data + sizeof(*rx_res) + len));
 
 	/* Dont use dev_alloc_skb(), we'll have enough headroom once
-- 
2.20.1

[PATCH AUTOSEL 4.14 112/130] spi: tegra20-slink: add missed clk_unprepare

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 04358e40ba96d687c0811c21d9dede73f5244a98 ]

The driver misses calling clk_unprepare in probe failure and remove.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 9831c1106945e..62b074b167a9a 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1078,7 +1078,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	ret = clk_enable(tspi->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_free_master;
+		goto exit_clk_unprepare;
 	}
 
 	spi_irq = platform_get_irq(pdev, 0);
@@ -1151,6 +1151,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	free_irq(spi_irq, tspi);
 exit_clk_disable:
 	clk_disable(tspi->clk);
+exit_clk_unprepare:
+	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1164,6 +1166,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	free_irq(tspi->irq, tspi);
 
 	clk_disable(tspi->clk);
+	clk_unprepare(tspi->clk);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
-- 
2.20.1

[PATCH AUTOSEL 4.14 113/130] crypto: virtio - deal with unsupported input sizes

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 19c5da7d4a2662e85ea67d2d81df57e038fde3ab ]

Return -EINVAL for input sizes that are not a multiple of the AES
block size, since they are not supported by our CBC chaining mode.

While at it, remove the pr_err() that reports unsupported key sizes
being used: we shouldn't spam the kernel log with that.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/virtio/virtio_crypto_algs.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c
index 5035b0dc1e40c..e2231a1a05a12 100644
--- a/drivers/crypto/virtio/virtio_crypto_algs.c
+++ b/drivers/crypto/virtio/virtio_crypto_algs.c
@@ -110,8 +110,6 @@ virtio_crypto_alg_validate_key(int key_len, uint32_t *alg)
 		*alg = VIRTIO_CRYPTO_CIPHER_AES_CBC;
 		break;
 	default:
-		pr_err("virtio_crypto: Unsupported key length: %d\n",
-			key_len);
 		return -EINVAL;
 	}
 	return 0;
@@ -485,6 +483,11 @@ static int virtio_crypto_ablkcipher_encrypt(struct ablkcipher_request *req)
 	/* Use the first data virtqueue as default */
 	struct data_queue *data_vq = &vcrypto->data_vq[0];
 
+	if (!req->nbytes)
+		return 0;
+	if (req->nbytes % AES_BLOCK_SIZE)
+		return -EINVAL;
+
 	vc_req->dataq = data_vq;
 	vc_req->alg_cb = virtio_crypto_dataq_sym_callback;
 	vc_sym_req->ablkcipher_ctx = ctx;
@@ -505,6 +508,11 @@ static int virtio_crypto_ablkcipher_decrypt(struct ablkcipher_request *req)
 	/* Use the first data virtqueue as default */
 	struct data_queue *data_vq = &vcrypto->data_vq[0];
 
+	if (!req->nbytes)
+		return 0;
+	if (req->nbytes % AES_BLOCK_SIZE)
+		return -EINVAL;
+
 	vc_req->dataq = data_vq;
 	vc_req->alg_cb = virtio_crypto_dataq_sym_callback;
 	vc_sym_req->ablkcipher_ctx = ctx;
-- 
2.20.1

[PATCH AUTOSEL 4.14 114/130] mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests

[Sasha Levin]

From: Eugeniu Rosca <erosca@de.adit-jv.com>

[ Upstream commit c91843463e9e821dc3b48fe37e3155fa38299f6e ]

Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested
adding MMC_CAP_ERASE to the TMIO mmc core:

On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote:
 -- snip --
 This test and due to the discussions with Wolfram and you in this
 thread, I would actually suggest that you enable MMC_CAP_ERASE for all
 tmio variants, rather than just for this particular one.

 In other words, set the cap in tmio_mmc_host_probe() should be fine,
 as it seems none of the tmio variants supports HW busy detection at
 this point.
 -- snip --

Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7):

root@rcar-gen3:~# lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk0      179:0    0 59.2G  0 disk  <--- eMMC
mmcblk0boot0 179:8    0    4M  1 disk
mmcblk0boot1 179:16   0    4M  1 disk
mmcblk1      179:24   0   30G  0 disk  <--- SD card

root@rcar-gen3:~# time blkdiscard /dev/mmcblk0
real    0m8.659s
user    0m0.001s
sys     0m1.920s

root@rcar-gen3:~# time blkdiscard /dev/mmcblk1
real    0m1.176s
user    0m0.001s
sys     0m0.124s

[1] https://lore.kernel.org/linux-renesas-soc/20191112134808.23546-1-erosca@de.adit-jv.com/

Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Originally-by: Harish Jenny K N <harish_kandiga@mentor.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 2fd862dc97701..a09aad9155a56 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1220,7 +1220,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
 		_host->start_signal_voltage_switch;
 	mmc->ops = &tmio_mmc_ops;
 
-	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
+	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_4_BIT_DATA | pdata->capabilities;
 	mmc->caps2 |= pdata->capabilities2;
 	mmc->max_segs = pdata->max_segs ? : 32;
 	mmc->max_blk_size = 512;
-- 
2.20.1

[PATCH AUTOSEL 4.14 115/130] btrfs: don't prematurely free work in end_workqueue_fn()

[Sasha Levin]

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit 9be490f1e15c34193b1aae17da58e14dd9f55a95 ]

Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds
the work item) and then calls bio_endio(). This is another potential
instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".

In particular, the endio call may depend on other work items. For
example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() ->
__btrfs_correct_data_nocsum() -> dio_read_error() ->
submit_dio_repair_bio(), which submits a bio that is also completed
through a end_workqueue_fn() work item. However,
__btrfs_correct_data_nocsum() waits for the newly submitted bio to
complete, thus it depends on another work item.

This example currently usually works because we use different workqueue
helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR.
However, it may deadlock with stacked filesystems and is fragile
overall. The proper fix is to free the work item at the very end of the
work function, so let's do that.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/disk-io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 813834552aa10..a8ea56218d6b6 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1679,8 +1679,8 @@ static void end_workqueue_fn(struct btrfs_work *work)
 	bio->bi_status = end_io_wq->status;
 	bio->bi_private = end_io_wq->private;
 	bio->bi_end_io = end_io_wq->end_io;
-	kmem_cache_free(btrfs_end_io_wq_cache, end_io_wq);
 	bio_endio(bio);
+	kmem_cache_free(btrfs_end_io_wq_cache, end_io_wq);
 }
 
 static int cleaner_kthread(void *arg)
-- 
2.20.1

[PATCH AUTOSEL 4.14 116/130] btrfs: don't prematurely free work in run_ordered_work()

[Sasha Levin]

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit c495dcd6fbe1dce51811a76bb85b4675f6494938 ]

We hit the following very strange deadlock on a system with Btrfs on a
loop device backed by another Btrfs filesystem:

1. The top (loop device) filesystem queues an async_cow work item from
   cow_file_range_async(). We'll call this work X.
2. Worker thread A starts work X (normal_work_helper()).
3. Worker thread A executes the ordered work for the top filesystem
   (run_ordered_work()).
4. Worker thread A finishes the ordered work for work X and frees X
   (work->ordered_free()).
5. Worker thread A executes another ordered work and gets blocked on I/O
   to the bottom filesystem (still in run_ordered_work()).
6. Meanwhile, the bottom filesystem allocates and queues an async_cow
   work item which happens to be the recently-freed X.
7. The workqueue code sees that X is already being executed by worker
   thread A, so it schedules X to be executed _after_ worker thread A
   finishes (see the find_worker_executing_work() call in
   process_one_work()).

Now, the top filesystem is waiting for I/O on the bottom filesystem, but
the bottom filesystem is waiting for the top filesystem to finish, so we
deadlock.

This happens because we are breaking the workqueue assumption that a
work item cannot be recycled while it still depends on other work. Fix
it by waiting to free the work item until we are done with all of the
related ordered work.

P.S.:

One might ask why the workqueue code doesn't try to detect a recycled
work item. It actually does try by checking whether the work item has
the same work function (find_worker_executing_work()), but in our case
the function is the same. This is the only key that the workqueue code
has available to compare, short of adding an additional, layer-violating
"custom key". Considering that we're the only ones that have ever hit
this, we should just play by the rules.

Unfortunately, we haven't been able to create a minimal reproducer other
than our full container setup using a compress-force=zstd filesystem on
top of another compress-force=zstd filesystem.

Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/async-thread.c | 56 ++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index e00c8a9fd5bbc..72d7589072f52 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -265,16 +265,17 @@ static inline void thresh_exec_hook(struct __btrfs_workqueue *wq)
 	}
 }
 
-static void run_ordered_work(struct __btrfs_workqueue *wq)
+static void run_ordered_work(struct __btrfs_workqueue *wq,
+			     struct btrfs_work *self)
 {
 	struct list_head *list = &wq->ordered_list;
 	struct btrfs_work *work;
 	spinlock_t *lock = &wq->list_lock;
 	unsigned long flags;
+	void *wtag;
+	bool free_self = false;
 
 	while (1) {
-		void *wtag;
-
 		spin_lock_irqsave(lock, flags);
 		if (list_empty(list))
 			break;
@@ -300,16 +301,47 @@ static void run_ordered_work(struct __btrfs_workqueue *wq)
 		list_del(&work->ordered_list);
 		spin_unlock_irqrestore(lock, flags);
 
-		/*
-		 * We don't want to call the ordered free functions with the
-		 * lock held though. Save the work as tag for the trace event,
-		 * because the callback could free the structure.
-		 */
-		wtag = work;
-		work->ordered_free(work);
-		trace_btrfs_all_work_done(wq->fs_info, wtag);
+		if (work == self) {
+			/*
+			 * This is the work item that the worker is currently
+			 * executing.
+			 *
+			 * The kernel workqueue code guarantees non-reentrancy
+			 * of work items. I.e., if a work item with the same
+			 * address and work function is queued twice, the second
+			 * execution is blocked until the first one finishes. A
+			 * work item may be freed and recycled with the same
+			 * work function; the workqueue code assumes that the
+			 * original work item cannot depend on the recycled work
+			 * item in that case (see find_worker_executing_work()).
+			 *
+			 * Note that the work of one Btrfs filesystem may depend
+			 * on the work of another Btrfs filesystem via, e.g., a
+			 * loop device. Therefore, we must not allow the current
+			 * work item to be recycled until we are really done,
+			 * otherwise we break the above assumption and can
+			 * deadlock.
+			 */
+			free_self = true;
+		} else {
+			/*
+			 * We don't want to call the ordered free functions with
+			 * the lock held though. Save the work as tag for the
+			 * trace event, because the callback could free the
+			 * structure.
+			 */
+			wtag = work;
+			work->ordered_free(work);
+			trace_btrfs_all_work_done(wq->fs_info, wtag);
+		}
 	}
 	spin_unlock_irqrestore(lock, flags);
+
+	if (free_self) {
+		wtag = self;
+		self->ordered_free(self);
+		trace_btrfs_all_work_done(wq->fs_info, wtag);
+	}
 }
 
 static void normal_work_helper(struct btrfs_work *work)
@@ -337,7 +369,7 @@ static void normal_work_helper(struct btrfs_work *work)
 	work->func(work);
 	if (need_order) {
 		set_bit(WORK_DONE_BIT, &work->flags);
-		run_ordered_work(wq);
+		run_ordered_work(wq, work);
 	}
 	if (!need_order)
 		trace_btrfs_all_work_done(wq->fs_info, wtag);
-- 
2.20.1

[PATCH AUTOSEL 4.14 117/130] spi: st-ssc4: add missed pm_runtime_disable

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit cd050abeba2a95fe5374eec28ad2244617bcbab6 ]

The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-st-ssc4.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
index a4e43fc19ece5..5df01ffdef468 100644
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -385,6 +385,7 @@ static int spi_st_probe(struct platform_device *pdev)
 	return 0;
 
 clk_disable:
+	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(spi_st->clk);
 put_master:
 	spi_master_put(master);
@@ -396,6 +397,8 @@ static int spi_st_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct spi_st *spi_st = spi_master_get_devdata(master);
 
+	pm_runtime_disable(&pdev->dev);
+
 	clk_disable_unprepare(spi_st->clk);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 118/130] x86/insn: Add some Intel instructions to the opcode map

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit b980be189c9badba50634671e2303e92bf28e35a ]

Add to the opcode map the following instructions:
        cldemote
        tpause
        umonitor
        umwait
        movdiri
        movdir64b
        enqcmd
        enqcmds
        encls
        enclu
        enclv
        pconfig
        wbnoinvd

For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).

The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:

  $ perf test -v "new " 2>&1 | grep -i cldemote
  Decoded ok: 0f 1c 00                    cldemote (%eax)
  Decoded ok: 0f 1c 05 78 56 34 12        cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%eax,%ecx,8)
  Decoded ok: 0f 1c 00                    cldemote (%rax)
  Decoded ok: 41 0f 1c 00                 cldemote (%r8)
  Decoded ok: 0f 1c 04 25 78 56 34 12     cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%rax,%rcx,8)
  Decoded ok: 41 0f 1c 84 c8 78 56 34 12  cldemote 0x12345678(%r8,%rcx,8)
  $ perf test -v "new " 2>&1 | grep -i tpause
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 41 0f ae f0              tpause %r8d
  $ perf test -v "new " 2>&1 | grep -i umonitor
  Decoded ok: 67 f3 0f ae f0              umonitor %ax
  Decoded ok: f3 0f ae f0                 umonitor %eax
  Decoded ok: 67 f3 0f ae f0              umonitor %eax
  Decoded ok: f3 0f ae f0                 umonitor %rax
  Decoded ok: 67 f3 41 0f ae f0           umonitor %r8d
  $ perf test -v "new " 2>&1 | grep -i umwait
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 41 0f ae f0              umwait %r8d
  $ perf test -v "new " 2>&1 | grep -i movdiri
  Decoded ok: 0f 38 f9 03                 movdiri %eax,(%ebx)
  Decoded ok: 0f 38 f9 88 78 56 34 12     movdiri %ecx,0x12345678(%eax)
  Decoded ok: 48 0f 38 f9 03              movdiri %rax,(%rbx)
  Decoded ok: 48 0f 38 f9 88 78 56 34 12  movdiri %rcx,0x12345678(%rax)
  $ perf test -v "new " 2>&1 | grep -i movdir64b
  Decoded ok: 66 0f 38 f8 18              movdir64b (%eax),%ebx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%eax),%ecx
  Decoded ok: 67 66 0f 38 f8 1c           movdir64b (%si),%bx
  Decoded ok: 67 66 0f 38 f8 8c 34 12     movdir64b 0x1234(%si),%cx
  Decoded ok: 66 0f 38 f8 18              movdir64b (%rax),%rbx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%rax),%rcx
  Decoded ok: 67 66 0f 38 f8 18           movdir64b (%eax),%ebx
  Decoded ok: 67 66 0f 38 f8 88 78 56 34 12       movdir64b 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmd
  Decoded ok: f2 0f 38 f8 18              enqcmd (%eax),%ebx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%eax),%ecx
  Decoded ok: 67 f2 0f 38 f8 1c           enqcmd (%si),%bx
  Decoded ok: 67 f2 0f 38 f8 8c 34 12     enqcmd 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f2 0f 38 f8 18              enqcmd (%rax),%rbx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%rax),%rcx
  Decoded ok: 67 f2 0f 38 f8 18           enqcmd (%eax),%ebx
  Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12       enqcmd 0x12345678(%eax),%ecx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmds
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i encls
  Decoded ok: 0f 01 cf                    encls
  Decoded ok: 0f 01 cf                    encls
  $ perf test -v "new " 2>&1 | grep -i enclu
  Decoded ok: 0f 01 d7                    enclu
  Decoded ok: 0f 01 d7                    enclu
  $ perf test -v "new " 2>&1 | grep -i enclv
  Decoded ok: 0f 01 c0                    enclv
  Decoded ok: 0f 01 c0                    enclv
  $ perf test -v "new " 2>&1 | grep -i pconfig
  Decoded ok: 0f 01 c5                    pconfig
  Decoded ok: 0f 01 c5                    pconfig
  $ perf test -v "new " 2>&1 | grep -i wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/lib/x86-opcode-map.txt               | 18 ++++++++++++------
 tools/objtool/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
 2 files changed, 24 insertions(+), 12 deletions(-)

diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd773..0a0e9112f2842 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd773..0a0e9112f2842 100644
--- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
-- 
2.20.1

[PATCH AUTOSEL 4.14 119/130] iwlwifi: check kasprintf() return value

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ]

kasprintf() can fail, we should check the return value.

Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger")
Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/dvm/led.c | 3 +++
 drivers/net/wireless/intel/iwlwifi/mvm/led.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/led.c b/drivers/net/wireless/intel/iwlwifi/dvm/led.c
index 1bbd17ada9747..20e16c4239901 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/led.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/led.c
@@ -185,6 +185,9 @@ void iwl_leds_init(struct iwl_priv *priv)
 
 	priv->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(priv->hw->wiphy));
+	if (!priv->led.name)
+		return;
+
 	priv->led.brightness_set = iwl_led_brightness_set;
 	priv->led.blink_set = iwl_led_blink_set;
 	priv->led.max_brightness = 1;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/led.c b/drivers/net/wireless/intel/iwlwifi/mvm/led.c
index b27269504a622..072f80c90ce4a 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/led.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/led.c
@@ -131,6 +131,9 @@ int iwl_mvm_leds_init(struct iwl_mvm *mvm)
 
 	mvm->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(mvm->hw->wiphy));
+	if (!mvm->led.name)
+		return -ENOMEM;
+
 	mvm->led.brightness_set = iwl_led_brightness_set;
 	mvm->led.max_brightness = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 120/130] fbtft: Make sure string is NULL terminated

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 21f585480deb4bcf0d92b08879c35d066dfee030 ]

New GCC warns about inappropriate use of strncpy():

drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’:
drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
  665 |  strncpy(info->fix.id, dev->driver->name, 16);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Later on the copy is being used with the assumption to be NULL terminated.
Make sure string is NULL terminated by switching to snprintf().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fbtft/fbtft-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 0cbcbad8f0742..b81c6dfa5b249 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -780,7 +780,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 	fbdefio->deferred_io =     fbtft_deferred_io;
 	fb_deferred_io_init(info);
 
-	strncpy(info->fix.id, dev->driver->name, 16);
+	snprintf(info->fix.id, sizeof(info->fix.id), "%s", dev->driver->name);
 	info->fix.type =           FB_TYPE_PACKED_PIXELS;
 	info->fix.visual =         FB_VISUAL_TRUECOLOR;
 	info->fix.xpanstep =	   0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 121/130] debugfs: Fix !DEBUG_FS debugfs_create_automount

[Sasha Levin]

From: Kusanagi Kouichi <slash@ac.auone-net.jp>

[ Upstream commit 4250b047039d324e0ff65267c8beb5bad5052a86 ]

If DEBUG_FS=n, compile fails with the following error:

kernel/trace/trace.c: In function 'tracing_init_dentry':
kernel/trace/trace.c:8658:9: error: passing argument 3 of 'debugfs_create_automount' from incompatible pointer type [-Werror=incompatible-pointer-types]
 8658 |         trace_automount, NULL);
      |         ^~~~~~~~~~~~~~~
      |         |
      |         struct vfsmount * (*)(struct dentry *, void *)
In file included from kernel/trace/trace.c:24:
./include/linux/debugfs.h:206:25: note: expected 'struct vfsmount * (*)(void *)' but argument is of type 'struct vfsmount * (*)(struct dentry *, void *)'
  206 |      struct vfsmount *(*f)(void *),
      |      ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Link: https://lore.kernel.org/r/20191121102021787.MLMY.25002.ppp.dion.ne.jp@dmta0003.auone-net.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/debugfs.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index b93efc8feecd1..755033acd2b0d 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -77,6 +77,8 @@ static const struct file_operations __fops = {				\
 	.llseek  = no_llseek,						\
 }
 
+typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
+
 #if defined(CONFIG_DEBUG_FS)
 
 struct dentry *debugfs_lookup(const char *name, struct dentry *parent);
@@ -98,7 +100,6 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
 struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 				      const char *dest);
 
-typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
 struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
 					debugfs_automount_t f,
@@ -227,7 +228,7 @@ static inline struct dentry *debugfs_create_symlink(const char *name,
 
 static inline struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
-					struct vfsmount *(*f)(void *),
+					debugfs_automount_t f,
 					void *data)
 {
 	return ERR_PTR(-ENODEV);
-- 
2.20.1

Re: [PATCH AUTOSEL 4.14 121/130] debugfs: Fix !DEBUG_FS debugfs_create_automount

[Greg Kroah-Hartman]

On Tue, Dec 10, 2019 at 05:02:52PM -0500, Sasha Levin wrote:
> From: Kusanagi Kouichi <slash@ac.auone-net.jp>
> 
> [ Upstream commit 4250b047039d324e0ff65267c8beb5bad5052a86 ]
> 
> If DEBUG_FS=n, compile fails with the following error:
> 
> kernel/trace/trace.c: In function 'tracing_init_dentry':
> kernel/trace/trace.c:8658:9: error: passing argument 3 of 'debugfs_create_automount' from incompatible pointer type [-Werror=incompatible-pointer-types]
>  8658 |         trace_automount, NULL);
>       |         ^~~~~~~~~~~~~~~
>       |         |
>       |         struct vfsmount * (*)(struct dentry *, void *)
> In file included from kernel/trace/trace.c:24:
> ./include/linux/debugfs.h:206:25: note: expected 'struct vfsmount * (*)(void *)' but argument is of type 'struct vfsmount * (*)(struct dentry *, void *)'
>   206 |      struct vfsmount *(*f)(void *),
>       |      ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~
> 
> Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
> Link: https://lore.kernel.org/r/20191121102021787.MLMY.25002.ppp.dion.ne.jp@dmta0003.auone-net.jp
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  include/linux/debugfs.h | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Not needed, please drop from everywhere.

thanks,

greg k-h

[PATCH AUTOSEL 4.14 122/130] crypto: sun4i-ss - Fix 64-bit size_t warnings

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit d6e9da21ee8246b5e556b3b153401ab045adb986 ]

If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.

This patch fixes all of the warnings.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
index 5cf64746731a3..22e4918579254 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -81,7 +81,8 @@ static int sun4i_ss_opti_poll(struct skcipher_request *areq)
 	oi = 0;
 	oo = 0;
 	do {
-		todo = min3(rx_cnt, ileft, (mi.length - oi) / 4);
+		todo = min(rx_cnt, ileft);
+		todo = min_t(size_t, todo, (mi.length - oi) / 4);
 		if (todo) {
 			ileft -= todo;
 			writesl(ss->base + SS_RXFIFO, mi.addr + oi, todo);
@@ -96,7 +97,8 @@ static int sun4i_ss_opti_poll(struct skcipher_request *areq)
 		rx_cnt = SS_RXFIFO_SPACES(spaces);
 		tx_cnt = SS_TXFIFO_SPACES(spaces);
 
-		todo = min3(tx_cnt, oleft, (mo.length - oo) / 4);
+		todo = min(tx_cnt, oleft);
+		todo = min_t(size_t, todo, (mo.length - oo) / 4);
 		if (todo) {
 			oleft -= todo;
 			readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo);
@@ -220,7 +222,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 			 * todo is the number of consecutive 4byte word that we
 			 * can read from current SG
 			 */
-			todo = min3(rx_cnt, ileft / 4, (mi.length - oi) / 4);
+			todo = min(rx_cnt, ileft / 4);
+			todo = min_t(size_t, todo, (mi.length - oi) / 4);
 			if (todo && !ob) {
 				writesl(ss->base + SS_RXFIFO, mi.addr + oi,
 					todo);
@@ -234,8 +237,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 				 * we need to be able to write all buf in one
 				 * pass, so it is why we min() with rx_cnt
 				 */
-				todo = min3(rx_cnt * 4 - ob, ileft,
-					    mi.length - oi);
+				todo = min(rx_cnt * 4 - ob, ileft);
+				todo = min_t(size_t, todo, mi.length - oi);
 				memcpy(buf + ob, mi.addr + oi, todo);
 				ileft -= todo;
 				oi += todo;
@@ -255,7 +258,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 		spaces = readl(ss->base + SS_FCSR);
 		rx_cnt = SS_RXFIFO_SPACES(spaces);
 		tx_cnt = SS_TXFIFO_SPACES(spaces);
-		dev_dbg(ss->dev, "%x %u/%u %u/%u cnt=%u %u/%u %u/%u cnt=%u %u\n",
+		dev_dbg(ss->dev,
+			"%x %u/%zu %u/%u cnt=%u %u/%zu %u/%u cnt=%u %u\n",
 			mode,
 			oi, mi.length, ileft, areq->cryptlen, rx_cnt,
 			oo, mo.length, oleft, areq->cryptlen, tx_cnt, ob);
@@ -263,7 +267,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 		if (!tx_cnt)
 			continue;
 		/* todo in 4bytes word */
-		todo = min3(tx_cnt, oleft / 4, (mo.length - oo) / 4);
+		todo = min(tx_cnt, oleft / 4);
+		todo = min_t(size_t, todo, (mo.length - oo) / 4);
 		if (todo) {
 			readsl(ss->base + SS_TXFIFO, mo.addr + oo, todo);
 			oleft -= todo * 4;
@@ -287,7 +292,8 @@ static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
 				 * no more than remaining buffer
 				 * no need to test against oleft
 				 */
-				todo = min(mo.length - oo, obl - obo);
+				todo = min_t(size_t,
+					     mo.length - oo, obl - obo);
 				memcpy(mo.addr + oo, bufo + obo, todo);
 				oleft -= todo;
 				obo += todo;
-- 
2.20.1

[PATCH AUTOSEL 4.14 123/130] crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c

[Sasha Levin]

From: Corentin Labbe <clabbe.montjoie@gmail.com>

[ Upstream commit a7126603d46fe8f01aeedf589e071c6aaa6c6c39 ]

If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.

This patch fixes all of the warnings on sun4i-ss-hash.c.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
index f6936bb3b7be4..1a724263761bc 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
@@ -276,8 +276,8 @@ static int sun4i_hash(struct ahash_request *areq)
 			 */
 			while (op->len < 64 && i < end) {
 				/* how many bytes we can read from current SG */
-				in_r = min3(mi.length - in_i, end - i,
-					    64 - op->len);
+				in_r = min(end - i, 64 - op->len);
+				in_r = min_t(size_t, mi.length - in_i, in_r);
 				memcpy(op->buf + op->len, mi.addr + in_i, in_r);
 				op->len += in_r;
 				i += in_r;
@@ -297,8 +297,8 @@ static int sun4i_hash(struct ahash_request *areq)
 		}
 		if (mi.length - in_i > 3 && i < end) {
 			/* how many bytes we can read from current SG */
-			in_r = min3(mi.length - in_i, areq->nbytes - i,
-				    ((mi.length - in_i) / 4) * 4);
+			in_r = min_t(size_t, mi.length - in_i, areq->nbytes - i);
+			in_r = min_t(size_t, ((mi.length - in_i) / 4) * 4, in_r);
 			/* how many bytes we can write in the device*/
 			todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4);
 			writesl(ss->base + SS_RXFIFO, mi.addr + in_i, todo);
@@ -324,8 +324,8 @@ static int sun4i_hash(struct ahash_request *areq)
 	if ((areq->nbytes - i) < 64) {
 		while (i < areq->nbytes && in_i < mi.length && op->len < 64) {
 			/* how many bytes we can read from current SG */
-			in_r = min3(mi.length - in_i, areq->nbytes - i,
-				    64 - op->len);
+			in_r = min(areq->nbytes - i, 64 - op->len);
+			in_r = min_t(size_t, mi.length - in_i, in_r);
 			memcpy(op->buf + op->len, mi.addr + in_i, in_r);
 			op->len += in_r;
 			i += in_r;
-- 
2.20.1

[PATCH AUTOSEL 4.14 124/130] mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED

[Sasha Levin]

From: Thomas Pedersen <thomas@adapt-ip.com>

[ Upstream commit 08a5bdde3812993cb8eb7aa9124703df0de28e4b ]

Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
let STAs send QoS Null frames as PS triggers if the AP was
a QoS STA.  However, the mac80211 PS stack relies on an
interface flag IEEE80211_STA_NULLFUNC_ACKED for
determining trigger frame ACK, which was not being set for
acked non-QoS Null frames. The effect is an inability to
trigger hardware sleep via IEEE80211_CONF_PS since the QoS
Null frame was seemingly never acked.

This bug only applies to drivers which set both
IEEE80211_HW_REPORTS_TX_ACK_STATUS and
IEEE80211_HW_PS_NULLFUNC_STACK.

Detect the acked QoS Null frame to restore STA power save.

Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/status.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index b18466cf466c5..fbe7354aeac7b 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -856,7 +856,8 @@ static void __ieee80211_tx_status(struct ieee80211_hw *hw,
 			I802_DEBUG_INC(local->dot11FailedCount);
 	}
 
-	if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc) &&
+	if ((ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) &&
+	    ieee80211_has_pm(fc) &&
 	    ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
 	    !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
 	    local->ps_sdata && !(local->scanning)) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 125/130] crypto: vmx - Avoid weird build failures

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 4ee812f6143d78d8ba1399671d78c8d78bf2817c ]

In the vmx crypto Makefile we assign to a variable called TARGET and
pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts.

The variable is meant to describe what flavour of powerpc we're
building for, eg. either 32 or 64-bit, and big or little endian.

Unfortunately TARGET is a fairly common name for a make variable, and
if it happens that TARGET is specified as a command line parameter to
make, the value specified on the command line will override our value.

In particular this can happen if the kernel Makefile is driven by an
external Makefile that uses TARGET for something.

This leads to weird build failures, eg:
  nonsense  at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45.
  /linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed

Which shows that we passed an empty value for $(TARGET) to the perl
script, confirmed with make V=1:

  perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl  > drivers/crypto/vmx/ghashp8-ppc.S

We can avoid this confusion by using override, to tell make that we
don't want anything to override our variable, even a value specified
on the command line. We can also use a less common name, given the
script calls it "flavour", let's use that.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/vmx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
index cab32cfec9c45..709670d2b553a 100644
--- a/drivers/crypto/vmx/Makefile
+++ b/drivers/crypto/vmx/Makefile
@@ -3,13 +3,13 @@ obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
 vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
 
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-TARGET := linux-ppc64le
+override flavour := linux-ppc64le
 else
-TARGET := linux-ppc64
+override flavour := linux-ppc64
 endif
 
 quiet_cmd_perl = PERL $@
-      cmd_perl = $(PERL) $(<) $(TARGET) > $(@)
+      cmd_perl = $(PERL) $(<) $(flavour) > $(@)
 
 targets += aesp8-ppc.S ghashp8-ppc.S
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 126/130] libtraceevent: Fix memory leakage in copy_filter_type

[Sasha Levin]

From: Hewenliang <hewenliang4@huawei.com>

[ Upstream commit 10992af6bf46a2048ad964985a5b77464e5563b1 ]

It is necessary to free the memory that we have allocated when error occurs.

Fixes: ef3072cd1d5c ("tools lib traceevent: Get rid of die in add_filter_type()")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/parse-filter.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c
index 5e10ba796a6f4..569bceff5f51b 100644
--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -1492,8 +1492,10 @@ static int copy_filter_type(struct event_filter *filter,
 	if (strcmp(str, "TRUE") == 0 || strcmp(str, "FALSE") == 0) {
 		/* Add trivial event */
 		arg = allocate_arg();
-		if (arg == NULL)
+		if (arg == NULL) {
+			free(str);
 			return -1;
+		}
 
 		arg->type = FILTER_ARG_BOOLEAN;
 		if (strcmp(str, "TRUE") == 0)
@@ -1502,8 +1504,11 @@ static int copy_filter_type(struct event_filter *filter,
 			arg->boolean.value = 0;
 
 		filter_type = add_filter_type(filter, event->id);
-		if (filter_type == NULL)
+		if (filter_type == NULL) {
+			free(str);
+			free_arg(arg);
 			return -1;
+		}
 
 		filter_type->filter = arg;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 127/130] perf parse: Fix potential memory leak when handling tracepoint errors

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 4584f084aa9d8033d5911935837dbee7b082d0e9 ]

An error may be in place when tracepoint_error is called, use
parse_events__handle_error to avoid a memory leak and to capture the
first and last error. Error detected by LLVM's libFuzzer using the
following event:

$ perf stat -e 'msr/event/,f:e'
event syntax error: 'msr/event/,f:e'
                     \___ can't access trace events

Error:  No permissions to read /sys/kernel/debug/tracing/events/f/e
Hint:   Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing/'

Initial error:
event syntax error: 'msr/event/,f:e'
                                \___ no value assigned for term
Run 'perf list' for a list of valid events

 Usage: perf stat [<options>] [<command>]

    -e, --event <event>   event selector. use 'perf list' to list available events

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191120180925.21787-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 096c52f296d77..6a9ae16cd098d 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -451,6 +451,7 @@ int parse_events_add_cache(struct list_head *list, int *idx,
 static void tracepoint_error(struct parse_events_error *e, int err,
 			     const char *sys, const char *name)
 {
+	const char *str;
 	char help[BUFSIZ];
 
 	if (!e)
@@ -464,18 +465,18 @@ static void tracepoint_error(struct parse_events_error *e, int err,
 
 	switch (err) {
 	case EACCES:
-		e->str = strdup("can't access trace events");
+		str = "can't access trace events";
 		break;
 	case ENOENT:
-		e->str = strdup("unknown tracepoint");
+		str = "unknown tracepoint";
 		break;
 	default:
-		e->str = strdup("failed to add tracepoint");
+		str = "failed to add tracepoint";
 		break;
 	}
 
 	tracing_path__strerror_open_tp(err, help, sizeof(help), sys, name);
-	e->help = strdup(help);
+	parse_events__handle_error(e, 0, strdup(str), strdup(help));
 }
 
 static int add_tracepoint(struct list_head *list, int *idx,
-- 
2.20.1

[PATCH AUTOSEL 4.14 128/130] mips: fix build when "48 bits virtual memory" is enabled

[Sasha Levin]

From: Mike Rapoport <rppt@linux.ibm.com>

[ Upstream commit 3ed6751bb8fa89c3014399bb0414348499ee202a ]

With CONFIG_MIPS_VA_BITS_48=y the build fails miserably:

  CC      arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/pgtable.h:644,
                 from include/linux/mm.h:99,
                 from arch/mips/kernel/asm-offsets.c:15:
include/asm-generic/pgtable.h:16:2: error: #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
 #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
  ^~~~~
include/asm-generic/pgtable.h:390:28: error: unknown type name 'p4d_t'; did you mean 'pmd_t'?
 static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b)
                            ^~~~~
                            pmd_t

[ ... more such errors ... ]

scripts/Makefile.build:99: recipe for target 'arch/mips/kernel/asm-offsets.s' failed
make[2]: *** [arch/mips/kernel/asm-offsets.s] Error 1

This happens because when CONFIG_MIPS_VA_BITS_48 enables 4th level of the
page tables, but neither pgtable-nop4d.h nor 5level-fixup.h are included to
cope with the 5th level.

Replace #ifdef conditions around includes of the pgtable-nop{m,u}d.h with
explicit CONFIG_PGTABLE_LEVELS and add include of 5level-fixup.h for the
case when CONFIG_PGTABLE_LEVELS==4

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/pgtable-64.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index a2252c2a9dede..d0b9912fb63fb 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -18,10 +18,12 @@
 #include <asm/fixmap.h>
 
 #define __ARCH_USE_5LEVEL_HACK
-#if defined(CONFIG_PAGE_SIZE_64KB) && !defined(CONFIG_MIPS_VA_BITS_48)
+#if CONFIG_PGTABLE_LEVELS == 2
 #include <asm-generic/pgtable-nopmd.h>
-#elif !(defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS_VA_BITS_48))
+#elif CONFIG_PGTABLE_LEVELS == 3
 #include <asm-generic/pgtable-nopud.h>
+#else
+#include <asm-generic/5level-fixup.h>
 #endif
 
 /*
@@ -222,6 +224,9 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 	return pgd_val(pgd);
 }
 
+#define pgd_phys(pgd)		virt_to_phys((void *)pgd_val(pgd))
+#define pgd_page(pgd)		(pfn_to_page(pgd_phys(pgd) >> PAGE_SHIFT))
+
 static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
 {
 	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address);
-- 
2.20.1

[PATCH AUTOSEL 4.14 129/130] perf intel-bts: Does not support AUX area sampling

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 32a1ece4bdbde24734ab16484bad7316f03fc42d ]

Add an error message because Intel BTS does not support AUX area
sampling.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/auxtrace.c  | 2 ++
 tools/perf/arch/x86/util/intel-bts.c | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/tools/perf/arch/x86/util/auxtrace.c b/tools/perf/arch/x86/util/auxtrace.c
index 6aa3f2a38321e..98db6f5ca08ba 100644
--- a/tools/perf/arch/x86/util/auxtrace.c
+++ b/tools/perf/arch/x86/util/auxtrace.c
@@ -36,6 +36,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct perf_evlist *evlist,
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
+	if (intel_bts_pmu)
+		intel_bts_pmu->auxtrace = true;
 
 	if (evlist) {
 		evlist__for_each_entry(evlist, evsel) {
diff --git a/tools/perf/arch/x86/util/intel-bts.c b/tools/perf/arch/x86/util/intel-bts.c
index 781df40b29660..b6120ef8b4a45 100644
--- a/tools/perf/arch/x86/util/intel-bts.c
+++ b/tools/perf/arch/x86/util/intel-bts.c
@@ -118,6 +118,11 @@ static int intel_bts_recording_options(struct auxtrace_record *itr,
 	const struct cpu_map *cpus = evlist->cpus;
 	bool privileged = geteuid() == 0 || perf_event_paranoid() < 0;
 
+	if (opts->auxtrace_sample_mode) {
+		pr_err("Intel BTS does not support AUX area sampling\n");
+		return -EINVAL;
+	}
+
 	btsr->evlist = evlist;
 	btsr->snapshot_mode = opts->auxtrace_snapshot_mode;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 130/130] net: phy: initialise phydev speed and duplex sanely

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ]

When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.

There is a window at initialisation time where we may report link
down using the 0/-1 values.  Tidy this up and use the predefined
constants, so debug doesn't complain with:

"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"

when the speed and duplex settings are printed.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ed7e3c70b511a..a98c227a4c2eb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -367,8 +367,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 	mdiodev->device_free = phy_mdio_device_free;
 	mdiodev->device_remove = phy_mdio_device_remove;
 
-	dev->speed = 0;
-	dev->duplex = -1;
+	dev->speed = SPEED_UNKNOWN;
+	dev->duplex = DUPLEX_UNKNOWN;
 	dev->pause = 0;
 	dev->asym_pause = 0;
 	dev->link = 1;
-- 
2.20.1