LKML Archive on
 help / color / Atom feed
From: Sibi Sankar <>
	Sibi Sankar <>
Subject: [PATCH v2 0/2] Add Modem support on SC7180 SoCs
Date: Thu, 19 Dec 2019 11:15:04 +0530
Message-ID: <> (raw)

This patch series adds support for booting the Modem Q6 DSP found in
Qualcomm's SC7180 SoCs.

 * split the series according to SoC
 * Duplicate code across q6v5proc_reset
 * add Rob's 'Reviewed-by' tag

Sibi Sankar (2):
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
  remoteproc: mss: q6v5-mss: Add modem support on SC7180

 .../bindings/remoteproc/qcom,q6v5.txt         |  23 +-
 drivers/remoteproc/qcom_q6v5_mss.c            | 199 +++++++++++++++++-
 2 files changed, 219 insertions(+), 3 deletions(-)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-19  5:45 Sibi Sankar [this message]
2019-12-19  5:45 ` [PATCH v2 1/2] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180 Sibi Sankar
2019-12-19  5:45 ` [PATCH v2 2/2] remoteproc: mss: q6v5-mss: Add modem support on SC7180 Sibi Sankar
2020-01-02 13:26   ` Philipp Zabel
2020-01-03 11:29     ` Sibi Sankar
2020-01-07 21:21   ` Evan Green
2020-01-14  7:06     ` Sibi Sankar
2020-01-14 17:28       ` Evan Green

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone