From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: ohad@wizery.com, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
p.zabel@pengutronix.de, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, agross@kernel.org,
Sibi Sankar <sibis@codeaurora.org>, Rob Herring <robh@kernel.org>
Subject: [PATCH v2 1/2] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
Date: Thu, 19 Dec 2019 11:15:05 +0530 [thread overview]
Message-ID: <20191219054506.20565-2-sibis@codeaurora.org> (raw)
In-Reply-To: <20191219054506.20565-1-sibis@codeaurora.org>
Add a new modem compatible string for Qualcomm SC7180 SoCs and introduce
the "qcom,halt-nav-regs" bindings needed by the modem sub-system running
on SC7180 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
.../bindings/remoteproc/qcom,q6v5.txt | 23 +++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index c416746f93cfd..88dfa3fc15f78 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -13,6 +13,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
+ "qcom,sc7180-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
@@ -43,6 +44,7 @@ on the Qualcomm Hexagon core.
must be "wdog", "fatal", "ready", "handover", "stop-ack"
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
+ qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -75,6 +77,9 @@ on the Qualcomm Hexagon core.
qcom,msm8998-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "qdss"
+ qcom,sc7180-mss-pil:
+ must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
+ "mss_crypto", "mss_nav", "nav"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -86,7 +91,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs
- reset-names:
Usage: required
@@ -95,7 +100,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs
For the compatible strings below the following supplies are required:
"qcom,q6v5-pil"
@@ -144,6 +149,7 @@ For the compatible string below the following supplies are required:
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
must be "cx", "mx"
+ qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss", "load_state"
@@ -165,6 +171,19 @@ For the compatible string below the following supplies are required:
by the three offsets within syscon for q6, modem and nc
halt registers.
+For the compatible strings below the following phandle references are required:
+ "qcom,sc7180-mss-pil"
+- qcom,halt-nav-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a list of 2 phandles with one offset each for
+ the modem sub-system running on SC7180 SoC. The first
+ phandle reference is to the mss clock node followed by the
+ offset within register space for nav halt register. The
+ second phandle reference is to a syscon representing TCSR
+ followed by the offset within syscon for conn_box_spare0
+ register.
+
= SUBNODES:
The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
the memory regions used by the Hexagon firmware. Each sub-node must contain:
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-12-19 5:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 5:45 [PATCH v2 0/2] Add Modem support on SC7180 SoCs Sibi Sankar
2019-12-19 5:45 ` Sibi Sankar [this message]
2019-12-19 5:45 ` [PATCH v2 2/2] remoteproc: mss: q6v5-mss: Add modem support on SC7180 Sibi Sankar
2020-01-02 13:26 ` Philipp Zabel
2020-01-03 11:29 ` Sibi Sankar
2020-01-07 21:21 ` Evan Green
2020-01-14 7:06 ` Sibi Sankar
2020-01-14 17:28 ` Evan Green
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219054506.20565-2-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).