linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] tty: synclink: Adjust indentation and style in several functions
@ 2019-12-18  2:27 Nathan Chancellor
  2019-12-20 18:04 ` Nick Desaulniers
  0 siblings, 1 reply; 3+ messages in thread
From: Nathan Chancellor @ 2019-12-18  2:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby
  Cc: linux-kernel, clang-built-linux, Nathan Chancellor

Clang warns:

../drivers/tty/synclink.c:1167:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if ( (status & RXSTATUS_ABORT_RECEIVED) &&
        ^
../drivers/tty/synclink.c:1163:2: note: previous statement is here
        if ( debug_level >= DEBUG_LEVEL_ISR )
        ^
../drivers/tty/synclink.c:1973:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclink.c:1971:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclink.c:3229:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        usc_set_serial_signals(info);
        ^
../drivers/tty/synclink.c:3227:2: note: previous statement is here
        else
        ^
../drivers/tty/synclink.c:4918:4: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
                if ( info->params.clock_speed )
                ^
../drivers/tty/synclink.c:4901:3: note: previous statement is here
                else
                ^
4 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Additionally, clean up some of lines touched by the indentation shift to
eliminate checkpatch warnings and leave this code in a better condition
than when it was left.

-:10: ERROR: trailing whitespace
-:10: ERROR: that open brace { should be on the previous line
-:10: ERROR: space prohibited after that open parenthesis '('
-:14: ERROR: space prohibited before that close parenthesis ')'
-:82: ERROR: trailing whitespace
-:87: WARNING: Block comments use a trailing */ on a separate line
-:88: ERROR: that open brace { should be on the previous line
-:88: ERROR: space prohibited after that open parenthesis '('
-:88: ERROR: space prohibited before that close parenthesis ')'
-:99: ERROR: else should follow close brace '}'

Link: https://github.com/ClangBuiltLinux/linux/issues/821
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
---
 drivers/tty/synclink.c | 55 ++++++++++++++++++++----------------------
 1 file changed, 26 insertions(+), 29 deletions(-)

diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 61dc6b4a43d0..586810defb21 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1164,21 +1164,20 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
 		printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
 			__FILE__,__LINE__,status);
 			
- 	if ( (status & RXSTATUS_ABORT_RECEIVED) && 
+	if ((status & RXSTATUS_ABORT_RECEIVED) &&
 		info->loopmode_insert_requested &&
- 		usc_loopmode_active(info) )
- 	{
+		usc_loopmode_active(info)) {
 		++info->icount.rxabort;
-	 	info->loopmode_insert_requested = false;
- 
- 		/* clear CMR:13 to start echoing RxD to TxD */
+		info->loopmode_insert_requested = false;
+
+		/* clear CMR:13 to start echoing RxD to TxD */
 		info->cmr_value &= ~BIT13;
- 		usc_OutReg(info, CMR, info->cmr_value);
- 
+		usc_OutReg(info, CMR, info->cmr_value);
+
 		/* disable received abort irq (no longer required) */
-	 	usc_OutReg(info, RICR,
- 			(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
- 	}
+		usc_OutReg(info, RICR,
+			(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
+	}
 
 	if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) {
 		if (status & RXSTATUS_EXITED_HUNT)
@@ -1970,8 +1969,8 @@ static void mgsl_change_params(struct mgsl_struct *info)
 	info->read_status_mask = RXSTATUS_OVERRUN;
 	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+		info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
 	
 	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
@@ -3211,7 +3210,7 @@ static int carrier_raised(struct tty_port *port)
 	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
 	
 	spin_lock_irqsave(&info->irq_spinlock, flags);
- 	usc_get_serial_signals(info);
+	usc_get_serial_signals(info);
 	spin_unlock_irqrestore(&info->irq_spinlock, flags);
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
 }
@@ -3226,7 +3225,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	usc_set_serial_signals(info);
+	usc_set_serial_signals(info);
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
 }
 
@@ -4907,24 +4906,22 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
 		/*  of rounding up and then subtracting 1 we just don't subtract */
 		/*  the one in this case. */
 
- 		/*--------------------------------------------------
- 		 * ejz: for DPLL mode, application should use the
- 		 * same clock speed as the partner system, even 
- 		 * though clocking is derived from the input RxData.
- 		 * In case the user uses a 0 for the clock speed,
- 		 * default to 0xffffffff and don't try to divide by
- 		 * zero
- 		 *--------------------------------------------------*/
- 		if ( info->params.clock_speed )
- 		{
+		/*
+		 * ejz: for DPLL mode, application should use the
+		 * same clock speed as the partner system, even
+		 * though clocking is derived from the input RxData.
+		 * In case the user uses a 0 for the clock speed,
+		 * default to 0xffffffff and don't try to divide by
+		 * zero
+		 */
+		if (info->params.clock_speed) {
 			Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
 			if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
 			       / info->params.clock_speed) )
 				Tc--;
- 		}
- 		else
- 			Tc = -1;
- 				  
+		} else {
+			Tc = -1;
+		}
 
 		/* Write 16-bit Time Constant for BRG1 */
 		usc_OutReg( info, TC1R, Tc );
-- 
2.24.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-12-20 19:12 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-18  2:27 [PATCH] tty: synclink: Adjust indentation and style in several functions Nathan Chancellor
2019-12-20 18:04 ` Nick Desaulniers
2019-12-20 19:12   ` Nathan Chancellor

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).