* [PATCH v2] rtc: rv3029: remove useless error messages
@ 2019-12-23 10:01 Alexandre Belloni
0 siblings, 0 replies; only message in thread
From: Alexandre Belloni @ 2019-12-23 10:01 UTC (permalink / raw)
To: linux-rtc; +Cc: linux-kernel, Alexandre Belloni
Remove redundant messages or messages that would not add any value because
the information is already conveyed properly using errno.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-rv3029c2.c | 35 +++++++++--------------------------
1 file changed, 9 insertions(+), 26 deletions(-)
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index 6f1c7790a6a2..483faa4f66d4 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -318,10 +318,8 @@ static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs,
RV3029_WATCH_SECTION_LEN);
- if (ret < 0) {
- dev_err(dev, "%s: reading RTC section failed\n", __func__);
+ if (ret < 0)
return ret;
- }
tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
@@ -357,21 +355,16 @@ static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
ret = regmap_bulk_read(rv3029->regmap, RV3029_A_SC, regs,
RV3029_ALARM_SECTION_LEN);
- if (ret < 0) {
- dev_err(dev, "%s: reading alarm section failed\n", __func__);
+ if (ret < 0)
return ret;
- }
ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
- if (ret) {
- dev_err(dev, "Read IRQ Control Register error %d\n", ret);
+ if (ret)
return ret;
- }
+
ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
- if (ret < 0) {
- dev_err(dev, "Read IRQ Flags Register error %d\n", ret);
+ if (ret < 0)
return ret;
- }
tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f);
tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f);
@@ -802,11 +795,8 @@ static int rv3029_i2c_probe(struct i2c_client *client,
}
regmap = devm_regmap_init_i2c(client, &config);
- if (IS_ERR(regmap)) {
- dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
- __func__, PTR_ERR(regmap));
+ if (IS_ERR(regmap))
return PTR_ERR(regmap);
- }
return rv3029_probe(&client->dev, regmap, client->irq, client->name);
}
@@ -863,11 +853,8 @@ static int rv3049_probe(struct spi_device *spi)
struct regmap *regmap;
regmap = devm_regmap_init_spi(spi, &config);
- if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
- __func__, PTR_ERR(regmap));
+ if (IS_ERR(regmap))
return PTR_ERR(regmap);
- }
return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049");
}
@@ -907,16 +894,12 @@ static int __init rv30x9_init(void)
int ret;
ret = rv3029_register_driver();
- if (ret) {
- pr_err("Failed to register rv3029 driver: %d\n", ret);
+ if (ret)
return ret;
- }
ret = rv3049_register_driver();
- if (ret) {
- pr_err("Failed to register rv3049 driver: %d\n", ret);
+ if (ret)
rv3029_unregister_driver();
- }
return ret;
}
--
2.23.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-12-23 10:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-23 10:01 [PATCH v2] rtc: rv3029: remove useless error messages Alexandre Belloni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).