[PATCH 5.4 000/165] 5.4.11-stable review

[PATCH 5.4 000/165] 5.4.11-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.11 release.
There are 165 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.11-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.11-rc1

Qi Zhou <atmgnd@outlook.com>
    usb: missing parentheses in USE_NEW_SCHEME

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit ME910G1 0x110a composition

Johan Hovold <johan@kernel.org>
    USB: core: fix check for duplicate endpoints

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Fix request complete check

Erez Shitrit <erezsh@mellanox.com>
    net/mlx5: DR, Init lists that are used in rule's member

Eli Cohen <eli@mellanox.com>
    net/mlx5e: Fix hairpin RSS table size

Yevgeny Kliteynik <kliteyn@mellanox.com>
    net/mlx5: DR, No need for atomic refcount for internal SW steering resources

Eran Ben Elisha <eranbe@mellanox.com>
    net/mlx5e: Always print health reporter message to dmesg

Baruch Siach <baruch@tkos.co.il>
    net: dsa: mv88e6xxx: force cmode write on 6141/6341

Michael Guralnik <michaelgur@mellanox.com>
    net/mlx5: Move devlink registration before interfaces load

Stephen Boyd <sboyd@kernel.org>
    macb: Don't unregister clks unconditionally

Eric Dumazet <edumazet@google.com>
    vlan: vlan_changelink() should propagate errors

Eric Dumazet <edumazet@google.com>
    vlan: fix memory leak in vlan_dev_set_egress_priority

Petr Machata <petrm@mellanox.com>
    net: sch_prio: When ungrafting, replace with FIFO

Petr Machata <petrm@mellanox.com>
    mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO

Hangbin Liu <liuhangbin@gmail.com>
    vxlan: fix tos value before xmit

Pengcheng Yang <yangpc@wangsu.com>
    tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACK

Xin Long <lucien.xin@gmail.com>
    sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY

Wen Yang <wenyang@linux.alibaba.com>
    sch_cake: avoid possible divide by zero in cake_enqueue()

Eric Dumazet <edumazet@google.com>
    pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM

Eric Dumazet <edumazet@google.com>
    net: usb: lan78xx: fix possible skb leak

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: Fixed link does not need MDIO Bus

Chen-Yu Tsai <wens@csie.org>
    net: stmmac: dwmac-sunxi: Allow all RGMII modes

Chen-Yu Tsai <wens@csie.org>
    net: stmmac: dwmac-sun8i: Allow all RGMII modes

Andrew Lunn <andrew@lunn.ch>
    net: freescale: fec: Fix ethtool -d runtime PM

Andrew Lunn <andrew@lunn.ch>
    net: dsa: mv88e6xxx: Preserve priority when setting CPU port.

Eric Dumazet <edumazet@google.com>
    macvlan: do not assume mac_header is set in macvlan_broadcast()

Eric Dumazet <edumazet@google.com>
    gtp: fix bad unlock balance in gtp_encap_enable_socket

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Do not create directories if lockdown is in affect

Hangbin Liu <liuhangbin@gmail.com>
    selftests: pmtu: fix init mtu value in description

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Fix unwanted rx_table reset

Chan Shu Tak, Alex <alexchan@task.com.hk>
    llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: don't return -ENOTSUPP to userspace

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix promiscuous mode after reset

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: handle error due to unsupported transport mode

David Jeffery <djeffery@redhat.com>
    sbitmap: only queue kyber's wait callback if not already active

Helge Deller <deller@gmx.de>
    parisc: Fix compiler warnings in debug_core.c

Yang Yingliang <yangyingliang@huawei.com>
    block: fix memleak when __blk_rq_map_user_iov() is failed

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix memleak in path handling error case

Jan Höppner <hoeppner@linux.ibm.com>
    s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly

Bart Van Assche <bvanassche@acm.org>
    block: Fix a lockdep complaint triggered by request queue flushing

Wei Li <liwei391@huawei.com>
    arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list

Enrico Weigelt, metux IT consult <info@metux.net>
    platform/x86: pcengines-apuv2: fix simswap GPIO assignment

Maxim Mikityanskiy <maximmi@mellanox.com>
    net/ixgbe: Fix concurrency issues between config flow and XSK

Maxim Mikityanskiy <maximmi@mellanox.com>
    net/i40e: Fix concurrency issues between config flow and XSK

Maxim Mikityanskiy <maximmi@mellanox.com>
    net/mlx5e: Fix concurrency issues between config flow and XSK

Maxim Mikityanskiy <maximmi@mellanox.com>
    xsk: Add rcu_read_lock around the XSK wakeup

Pavel Tatashin <pasha.tatashin@soleen.com>
    tpm/tpm_ftpm_tee: add shutdown call back

Chuhong Yuan <hslester96@gmail.com>
    drm/exynos: gsc: add missed component_del

Christian Borntraeger <borntraeger@de.ibm.com>
    s390/purgatory: do not build purgatory with kcov, kasan and friends

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: Always arm TX Timer at end of transmission start

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: RX buffer size must be 16 byte aligned

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: xgmac: Clear previous RX buffer size

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: Do not accept invalid MTU values

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: Determine earlier the size of RX buffer

Jose Abreu <Jose.Abreu@synopsys.com>
    net: stmmac: selftests: Needs to check the number of Multicast regs

Olof Johansson <olof@lixom.net>
    clk: Move clk_core_reparent_orphans() under CONFIG_OF

Pavel Begunkov <asml.silence@gmail.com>
    io_uring: don't wait when under-submitting

Robin Murphy <robin.murphy@arm.com>
    iommu/dma: Relax locking in iommu_dma_prepare_msi()

Hanjun Guo <guohanjun@huawei.com>
    perf/smmuv3: Remove the leftover put_cpu() in error path

Eric Sandeen <sandeen@redhat.com>
    fs: call fsnotify_sb_delete after evict_inodes

Eric Sandeen <sandeen@redhat.com>
    fs: avoid softlockups in s_inodes iterators

Roman Penyaev <rpenyaev@suse.de>
    block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT

zhong jiang <zhongjiang@huawei.com>
    usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'

Johannes Weiner <hannes@cmpxchg.org>
    psi: Fix a division error in psi poll()

Johannes Weiner <hannes@cmpxchg.org>
    sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime

Alexander Shishkin <alexander.shishkin@linux.intel.com>
    perf/x86/intel: Fix PT PMI handling

Peter Zijlstra <peterz@infradead.org>
    perf/x86: Fix potential out-of-bounds access

Enrico Weigelt, metux IT consult <info@metux.net>
    scripts: package: mkdebian: add missing rsync dependency

Thomas Hebb <tommyhebb@gmail.com>
    kconfig: don't crash on NULL expressions in expr_eq()

Xiaotao Yin <xiaotao.yin@windriver.com>
    iommu/iova: Init the struct iova to fix the possible memleak

Brendan Higgins <brendanhiggins@google.com>
    staging: axis-fifo: add unspecified HAS_IOMEM dependency

Alexandre Belloni <alexandre.belloni@bootlin.com>
    clk: at91: fix possible deadlock

Michael Walle <michael@walle.cc>
    spi: nxp-fspi: Ensure width is respected in spi-mem operations

Andreas Kemnade <andreas@kemnade.info>
    regulator: rn5t618: fix module aliases

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: wm8962: fix lambda value

Aditya Pakki <pakki001@umn.edu>
    rfkill: Fix incorrect check to avoid NULL pointer dereference

Sven Schnelle <svens@stackframe.org>
    parisc: add missing __init annotation

Sven Schnelle <svens@stackframe.org>
    parisc: fix compilation when KEXEC=n and KEXEC_FILE=y

Cristian Birsan <cristian.birsan@microchip.com>
    net: usb: lan78xx: Fix error message format specifier

Vishal Kulkarni <vishal@chelsio.com>
    cxgb4: Fix kernel panic while accessing sge_info

Manish Chopra <manishc@marvell.com>
    bnx2x: Fix logic to get total no. of PFs per engine

Manish Chopra <manishc@marvell.com>
    bnx2x: Do not handle requests from VFs after parity

Chen Wandun <chenwandun@huawei.com>
    habanalabs: remove variable 'val' set but not used

Oded Gabbay <oded.gabbay@gmail.com>
    habanalabs: rate limit error msg on waiting for CS

Lorenz Bauer <lmb@cloudflare.com>
    bpf: Clear skb->tstamp in bpf_redirect when necessary

Frederic Barrat <fbarrat@linux.ibm.com>
    ocxl: Fix potential memory leak on context creation

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix hole extent items with a zero size after range cloning

Josef Bacik <josef@toxicpanda.com>
    btrfs: handle error in btrfs_cache_block_group

Jason A. Donenfeld <Jason@zx2c4.com>
    powerpc/spinlocks: Include correct header for static key

Srikar Dronamraju <srikar@linux.vnet.ibm.com>
    powerpc/vcpu: Assume dedicated processors as non-preempt

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix cloning range with a hole when using the NO_HOLES feature

Nikolay Borisov <nborisov@suse.com>
    btrfs: Fix error messages in qgroup_rescan_init

Mike Rapoport <rppt@linux.ibm.com>
    powerpc: Ensure that swiotlb buffer is allocated from low memory

Alexandre Torgue <alexandre.torgue@st.com>
    pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio

Stefan Bühler <source@stbuehler.de>
    cfg80211: fix double-free after changing network namespace

Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
    mac80211: fix TID field in monitor mode transmit

Jerome Brunet <jbrunet@baylibre.com>
    clk: walk orphan list on clock provider registration

Tony Lindgren <tony@atomide.com>
    bus: ti-sysc: Fix missing reset delay handling

Andrew Jeffery <andrew@aj.id.au>
    pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration

Leonard Crestez <leonard.crestez@nxp.com>
    ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS

Michael Walle <michael@walle.cc>
    arm64: dts: ls1028a: fix reboot node

Daniel T. Lee <danieltimlee@gmail.com>
    samples: bpf: fix syscall_tp due to unused syscall

Daniel T. Lee <danieltimlee@gmail.com>
    samples: bpf: Replace symbol compare of trace_event

SeongJae Park <sjpark@amazon.de>
    kselftest: Support old perl versions

SeongJae Park <sjpark@amazon.de>
    kselftest/runner: Print new line in print of timeout log

Tomi Valkeinen <tomi.valkeinen@ti.com>
    ARM: dts: am437x-gp/epos-evm: fix panel compatible

Vignesh Raghavendra <vigneshr@ti.com>
    spi: spi-ti-qspi: Fix a bug when accessing non default CS

Michael Petlan <mpetlan@redhat.com>
    perf header: Fix false warning when there are no duplicate cache entries

Kajol Jain <kjain@linux.ibm.com>
    perf metricgroup: Fix printing event names of metric group with multiple events

Toke Høiland-Jørgensen <toke@redhat.com>
    bpftool: Don't crash on missing jited insns or ksyms

Paul Chaignon <paul.chaignon@orange.com>
    bpf, mips: Limit to 33 tail calls

Paul Chaignon <paul.chaignon@orange.com>
    bpf, riscv: Limit to 33 tail calls

Michael Walle <michael@walle.cc>
    arm64: dts: ls1028a: fix typo in TMU calibration data

Stefan Wahren <wahrenst@gmx.net>
    ARM: dts: bcm283x: Fix critical trip point

Tony Lindgren <tony@atomide.com>
    ARM: omap2plus_defconfig: Add back DEBUG_FS

Mans Rullgard <mans@mansr.com>
    ARM: dts: am335x-sancloud-bbe: fix phy mode

Curtis Malainey <cujomalainey@chromium.org>
    ASoC: SOF: Intel: split cht and byt debug window sizes

Karol Trzcinski <karolx.trzcinski@linux.intel.com>
    ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

Dragos Tarcatu <dragos_tarcatu@mentor.com>
    ASoC: topology: Check return value for soc_tplg_pcm_create()

Dragos Tarcatu <dragos_tarcatu@mentor.com>
    ASoC: topology: Check return value for snd_soc_add_dai_link()

Geert Uytterhoeven <geert+renesas@glider.be>
    reset: Do not register resource data for missing resets

Chuhong Yuan <hslester96@gmail.com>
    spi: spi-cavium-thunderx: Add missing pci_release_regions()

Florian Fainelli <f.fainelli@gmail.com>
    ARM: dts: Cygnus: Fix MDIO node address/size cells

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: exynos_defconfig: Restore debugfs support

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: safesetid: Fix Makefile to set correct test program

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: safesetid: Check the return value of setuid/setgid

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: safesetid: Move link library to LDLIBS

Masami Hiramatsu <mhiramat@kernel.org>
    selftests/ftrace: Fix multiple kprobe testcase

Masami Hiramatsu <mhiramat@kernel.org>
    selftests/ftrace: Do not to use absolute debugfs path

Masami Hiramatsu <mhiramat@kernel.org>
    selftests/ftrace: Fix ftrace test cases to check unsupported

Masami Hiramatsu <mhiramat@kernel.org>
    selftests/ftrace: Fix to check the existence of set_ftrace_filter

Florian Fainelli <f.fainelli@gmail.com>
    ARM: dts: BCM5301X: Fix MDIO node address/size cells

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actions

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: skip module reference count bump on object updates

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets

Phil Sutter <phil@nwl.cc>
    netfilter: uapi: Avoid undefined left-shift in xt_sctp.h

Sudeep Holla <sudeep.holla@arm.com>
    ARM: vexpress: Set-up shared OPP table instead of individual for each CPU

Stefan Roese <sr@denx.de>
    ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    efi/earlycon: Remap entire framebuffer after page initialization

Arvind Sankar <nivedita@alum.mit.edu>
    efi/gop: Fix memory leak in __gop_query32/64()

Arvind Sankar <nivedita@alum.mit.edu>
    efi/gop: Return EFI_SUCCESS if a usable GOP was found

Arvind Sankar <nivedita@alum.mit.edu>
    efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs

Florian Westphal <fw@strlen.de>
    selftests: netfilter: use randomized netns names

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

Dave Young <dyoung@redhat.com>
    x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

Wen Yang <wenyang@linux.alibaba.com>
    regulator: core: fix regulator_register() error paths to properly release rdev

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    libtraceevent: Copy pkg-config file to output folder when using O=

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    libtraceevent: Fix lib installation with O=

qize wang <wangqize888888888@gmail.com>
    mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()

wenxu <wenxu@ucloud.cn>
    netfilter: nf_tables_offload: Check for the NETDEV_UNREGISTER event

Kai-Heng Feng <kai.heng.feng@canonical.com>
    x86/intel: Disable HPET on Intel Ice Lake platforms

Florian Westphal <fw@strlen.de>
    netfilter: ctnetlink: netns exit must wait for callbacks

Marco Elver <elver@google.com>
    locking/spinlock/debug: Fix various data races

Linus Walleij <linus.walleij@linaro.org>
    spi: fsl: Handle the single hardwired chipselect case

Linus Walleij <linus.walleij@linaro.org>
    gpio: Handle counting of Freescale chipselects

Linus Walleij <linus.walleij@linaro.org>
    spi: fsl: Fix GPIO descriptor support

Tzung-Bi Shih <tzungbi@google.com>
    ASoC: max98090: fix possible race conditions

Wen Yang <wenyang@linux.alibaba.com>
    regulator: fix use after free issue

Jarkko Nikula <jarkko.nikula@linux.intel.com>
    spi: pxa2xx: Add support for Intel Jasper Lake

Shuming Fan <shumingf@realtek.com>
    ASoC: rt5682: fix i2c arbitration lost issue

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Fix passing modified ctx to ld/abs/ind instruction

Andrey Konovalov <andreyknvl@google.com>
    USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/am335x-sancloud-bbe.dts          |   2 +-
 arch/arm/boot/dts/am437x-gp-evm.dts                |   2 +-
 arch/arm/boot/dts/am43x-epos-evm.dts               |   2 +-
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   4 +-
 arch/arm/boot/dts/bcm283x.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm5301x.dtsi                    |   4 +-
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi            |   2 +-
 arch/arm/configs/exynos_defconfig                  |   1 +
 arch/arm/configs/imx_v6_v7_defconfig               |   1 +
 arch/arm/configs/omap2plus_defconfig               |   1 +
 arch/arm/mach-vexpress/spc.c                       |  12 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |  10 +-
 arch/arm64/kernel/cpu_errata.c                     |   1 +
 arch/mips/net/ebpf_jit.c                           |   9 +-
 arch/parisc/include/asm/cmpxchg.h                  |  10 +-
 arch/parisc/include/asm/kexec.h                    |   4 -
 arch/parisc/kernel/Makefile                        |   2 +-
 arch/parisc/kernel/drivers.c                       |   2 +-
 arch/powerpc/include/asm/spinlock.h                |   5 +-
 arch/powerpc/mm/mem.c                              |   8 +
 arch/powerpc/platforms/pseries/setup.c             |   7 +
 arch/riscv/net/bpf_jit_comp.c                      |   4 +-
 arch/s390/purgatory/Makefile                       |   6 +-
 arch/s390/purgatory/string.c                       |   3 +
 arch/x86/events/core.c                             |  19 +-
 arch/x86/kernel/early-quirks.c                     |   2 +
 arch/x86/platform/efi/quirks.c                     |   6 +-
 block/blk-core.c                                   |  11 +-
 block/blk-flush.c                                  |   5 +
 block/blk-map.c                                    |   2 +-
 block/blk.h                                        |   1 +
 drivers/bus/ti-sysc.c                              |   4 +
 drivers/char/tpm/tpm_ftpm_tee.c                    |  22 +-
 drivers/clk/at91/at91sam9260.c                     |   2 +-
 drivers/clk/at91/at91sam9rl.c                      |   2 +-
 drivers/clk/at91/at91sam9x5.c                      |   2 +-
 drivers/clk/at91/pmc.c                             |   2 +-
 drivers/clk/at91/sama5d2.c                         |   2 +-
 drivers/clk/at91/sama5d4.c                         |   2 +-
 drivers/clk/clk.c                                  |  62 ++--
 drivers/firmware/efi/earlycon.c                    |  40 +++
 drivers/firmware/efi/libstub/gop.c                 |  80 ++---
 drivers/gpio/gpiolib-of.c                          |  27 ++
 drivers/gpu/drm/exynos/exynos_drm_gsc.c            |   1 +
 drivers/iommu/dma-iommu.c                          |  17 +-
 drivers/iommu/iova.c                               |   2 +-
 drivers/misc/habanalabs/command_submission.c       |   5 +-
 drivers/misc/habanalabs/context.c                  |   2 +-
 drivers/misc/habanalabs/goya/goya.c                |  15 +-
 drivers/misc/ocxl/context.c                        |   8 +-
 drivers/net/dsa/mv88e6xxx/global1.c                |   5 +
 drivers/net/dsa/mv88e6xxx/global1.h                |   1 +
 drivers/net/dsa/mv88e6xxx/port.c                   |  12 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h    |   2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c   |  12 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h  |   1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c   |  12 +
 drivers/net/ethernet/cadence/macb_main.c           |   4 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c |   4 +
 drivers/net/ethernet/freescale/fec_main.c          |   9 +
 drivers/net/ethernet/intel/i40e/i40e.h             |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  10 +-
 drivers/net/ethernet/intel/i40e/i40e_xsk.c         |   4 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |   7 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c       |   8 +-
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/fs.h    |  16 +
 .../net/ethernet/mellanox/mlx5/core/en/health.c    |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h   |  22 +-
 .../net/ethernet/mellanox/mlx5/core/en/xsk/setup.c |   1 +
 .../net/ethernet/mellanox/mlx5/core/en/xsk/tx.c    |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c    |  16 -
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  19 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  16 +-
 .../ethernet/mellanox/mlx5/core/steering/dr_rule.c |   5 +-
 .../ethernet/mellanox/mlx5/core/steering/dr_ste.c  |  10 +-
 .../mellanox/mlx5/core/steering/dr_types.h         |  14 +-
 .../net/ethernet/mellanox/mlxsw/spectrum_qdisc.c   |   7 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |   3 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |   2 +
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c |   3 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  40 ++-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_selftests.c |   4 +
 drivers/net/gtp.c                                  |   5 +-
 drivers/net/hyperv/hyperv_net.h                    |   3 +-
 drivers/net/hyperv/netvsc_drv.c                    |   4 +-
 drivers/net/hyperv/rndis_filter.c                  |  10 +-
 drivers/net/macvlan.c                              |   2 +-
 drivers/net/usb/lan78xx.c                          |  11 +-
 drivers/net/vxlan.c                                |   4 +-
 drivers/net/wireless/marvell/mwifiex/tdls.c        |  70 ++++-
 drivers/perf/arm_smmuv3_pmu.c                      |   4 +-
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c         |  24 +-
 drivers/pinctrl/pinmux.c                           |   2 +-
 drivers/platform/x86/pcengines-apuv2.c             |   2 +-
 drivers/regulator/core.c                           |  12 +-
 drivers/regulator/rn5t618-regulator.c              |   1 +
 drivers/reset/core.c                               |   4 +-
 drivers/s390/block/dasd_eckd.c                     |  28 +-
 drivers/s390/cio/device_ops.c                      |   2 +-
 drivers/s390/net/qeth_core_main.c                  |  14 +-
 drivers/s390/net/qeth_core_mpc.h                   |   5 +
 drivers/s390/net/qeth_core_sys.c                   |   2 +-
 drivers/s390/net/qeth_l2_main.c                    |   1 +
 drivers/s390/net/qeth_l2_sys.c                     |   3 +-
 drivers/s390/net/qeth_l3_main.c                    |   1 +
 drivers/spi/spi-cavium-thunderx.c                  |   2 +
 drivers/spi/spi-fsl-spi.c                          |  15 +-
 drivers/spi/spi-nxp-fspi.c                         |   2 +-
 drivers/spi/spi-pxa2xx.c                           |   4 +
 drivers/spi/spi-ti-qspi.c                          |   6 +-
 drivers/staging/axis-fifo/Kconfig                  |   2 +-
 drivers/usb/core/config.c                          |  70 ++++-
 drivers/usb/core/hub.c                             |   2 +-
 drivers/usb/dwc3/gadget.c                          |   7 +
 drivers/usb/gadget/udc/dummy_hcd.c                 |   8 +-
 drivers/usb/serial/option.c                        |   2 +
 drivers/usb/typec/tcpm/Kconfig                     |   1 +
 fs/btrfs/extent-tree.c                             |  20 +-
 fs/btrfs/file.c                                    |   4 +-
 fs/btrfs/ioctl.c                                   |  16 +-
 fs/btrfs/qgroup.c                                  |   4 +-
 fs/drop_caches.c                                   |   2 +-
 fs/inode.c                                         |   7 +
 fs/io_uring.c                                      |   4 +
 fs/notify/fsnotify.c                               |   4 +
 fs/quota/dquot.c                                   |   1 +
 fs/super.c                                         |   4 +-
 include/linux/if_ether.h                           |   8 +
 include/uapi/linux/netfilter/xt_sctp.h             |   6 +-
 kernel/bpf/verifier.c                              |   9 +-
 kernel/locking/spinlock_debug.c                    |  32 +-
 kernel/sched/psi.c                                 |   5 +-
 kernel/trace/ring_buffer.c                         |   6 +
 kernel/trace/trace.c                               |  17 ++
 lib/sbitmap.c                                      |   2 +-
 net/8021q/vlan.h                                   |   1 +
 net/8021q/vlan_dev.c                               |   3 +-
 net/8021q/vlan_netlink.c                           |  19 +-
 net/core/filter.c                                  |   1 +
 net/ipv4/tcp_input.c                               |   5 +-
 net/llc/llc_station.c                              |   4 +-
 net/mac80211/tx.c                                  |   9 +
 net/netfilter/nf_conntrack_netlink.c               |   3 +
 net/netfilter/nf_tables_api.c                      |  18 +-
 net/netfilter/nf_tables_offload.c                  |   6 +
 net/netfilter/nft_bitwise.c                        |   4 +-
 net/netfilter/nft_cmp.c                            |   6 +
 net/netfilter/nft_range.c                          |  10 +
 net/netfilter/nft_set_rbtree.c                     |  21 +-
 net/rfkill/core.c                                  |   7 +-
 net/sched/sch_cake.c                               |   2 +-
 net/sched/sch_fq.c                                 |   6 +-
 net/sched/sch_prio.c                               |  10 +-
 net/sctp/sm_sideeffect.c                           |  28 +-
 net/wireless/core.c                                |   1 +
 net/xdp/xsk.c                                      |  22 +-
 samples/bpf/syscall_tp_kern.c                      |  18 +-
 samples/bpf/trace_event_user.c                     |   4 +-
 scripts/kconfig/expr.c                             |   7 +
 scripts/package/mkdebian                           |   2 +-
 sound/soc/codecs/max98090.c                        |   8 +-
 sound/soc/codecs/max98090.h                        |   1 -
 sound/soc/codecs/rt5682.c                          |   2 +
 sound/soc/codecs/wm8962.c                          |   4 +-
 sound/soc/intel/boards/bytcr_rt5640.c              |   8 +-
 sound/soc/soc-topology.c                           |  27 +-
 sound/soc/sof/intel/byt.c                          |   7 +-
 sound/soc/sof/loader.c                             |   2 +
 tools/bpf/bpftool/prog.c                           |   2 +-
 tools/bpf/bpftool/xlated_dumper.c                  |   2 +-
 tools/lib/traceevent/Makefile                      |   6 +-
 tools/perf/util/header.c                           |  21 +-
 tools/perf/util/metricgroup.c                      |   7 +-
 .../ftrace/test.d/ftrace/func-filter-stacktrace.tc |   2 +
 .../selftests/ftrace/test.d/ftrace/func_cpumask.tc |   5 +
 tools/testing/selftests/ftrace/test.d/functions    |   5 +-
 .../ftrace/test.d/kprobe/multiple_kprobes.tc       |   6 +-
 .../inter-event/trigger-action-hist-xfail.tc       |   4 +-
 .../inter-event/trigger-onchange-action-hist.tc    |   2 +-
 .../inter-event/trigger-snapshot-action-hist.tc    |   4 +-
 tools/testing/selftests/kselftest/prefix.pl        |   1 +
 tools/testing/selftests/kselftest/runner.sh        |   1 +
 tools/testing/selftests/net/pmtu.sh                |   6 +-
 tools/testing/selftests/netfilter/nft_nat.sh       | 332 +++++++++++----------
 tools/testing/selftests/safesetid/Makefile         |   5 +-
 tools/testing/selftests/safesetid/safesetid-test.c |  15 +-
 191 files changed, 1240 insertions(+), 687 deletions(-)

[PATCH 5.4 001/165] USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein

[Greg Kroah-Hartman]

From: Andrey Konovalov <andreyknvl@google.com>

commit 6dabeb891c001c592645df2f477fed9f5d959987 upstream.

Commit fea3409112a9 ("USB: add direction bit to urb->transfer_flags") has
added a usb_urb_dir_in() helper function that can be used to determine
the direction of the URB. With that patch USB_DIR_IN control requests with
wLength == 0 are considered out requests by real USB HCDs. This patch
changes dummy-hcd to use the usb_urb_dir_in() helper to match that
behavior.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/4ae9e68ebca02f08a93ac61fe065057c9a01f0a8.1571667489.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/dummy_hcd.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1321,7 +1321,7 @@ static int dummy_perform_transfer(struct
 	u32 this_sg;
 	bool next_sg;
 
-	to_host = usb_pipein(urb->pipe);
+	to_host = usb_urb_dir_in(urb);
 	rbuf = req->req.buf + req->req.actual;
 
 	if (!urb->num_sgs) {
@@ -1409,7 +1409,7 @@ top:
 
 		/* FIXME update emulated data toggle too */
 
-		to_host = usb_pipein(urb->pipe);
+		to_host = usb_urb_dir_in(urb);
 		if (unlikely(len == 0))
 			is_short = 1;
 		else {
@@ -1830,7 +1830,7 @@ restart:
 
 		/* find the gadget's ep for this request (if configured) */
 		address = usb_pipeendpoint (urb->pipe);
-		if (usb_pipein(urb->pipe))
+		if (usb_urb_dir_in(urb))
 			address |= USB_DIR_IN;
 		ep = find_endpoint(dum, address);
 		if (!ep) {
@@ -2385,7 +2385,7 @@ static inline ssize_t show_urb(char *buf
 			s = "?";
 			break;
 		 } s; }),
-		ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
+		ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "",
 		({ char *s; \
 		switch (usb_pipetype(urb->pipe)) { \
 		case PIPE_CONTROL: \

[PATCH 5.4 002/165] bpf: Fix passing modified ctx to ld/abs/ind instruction

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 6d4f151acf9a4f6fab09b615f246c717ddedcf0c upstream.

Anatoly has been fuzzing with kBdysch harness and reported a KASAN
slab oob in one of the outcomes:

  [...]
  [   77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406
  [   77.361119]
  [   77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1
  [   77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  [   77.362984] Call Trace:
  [   77.363249]  dump_stack+0x97/0xe0
  [   77.363603]  print_address_description.constprop.0+0x1d/0x220
  [   77.364251]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365030]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365860]  __kasan_report.cold+0x37/0x7b
  [   77.366365]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.366940]  kasan_report+0xe/0x20
  [   77.367295]  bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.367821]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.368278]  ? mark_lock+0xa3/0x9b0
  [   77.368641]  ? kvm_sched_clock_read+0x14/0x30
  [   77.369096]  ? sched_clock+0x5/0x10
  [   77.369460]  ? sched_clock_cpu+0x18/0x110
  [   77.369876]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.370330]  ___bpf_prog_run+0x16c0/0x28f0
  [   77.370755]  __bpf_prog_run32+0x83/0xc0
  [   77.371153]  ? __bpf_prog_run64+0xc0/0xc0
  [   77.371568]  ? match_held_lock+0x1b/0x230
  [   77.371984]  ? rcu_read_lock_held+0xa1/0xb0
  [   77.372416]  ? rcu_is_watching+0x34/0x50
  [   77.372826]  sk_filter_trim_cap+0x17c/0x4d0
  [   77.373259]  ? sock_kzfree_s+0x40/0x40
  [   77.373648]  ? __get_filter+0x150/0x150
  [   77.374059]  ? skb_copy_datagram_from_iter+0x80/0x280
  [   77.374581]  ? do_raw_spin_unlock+0xa5/0x140
  [   77.375025]  unix_dgram_sendmsg+0x33a/0xa70
  [   77.375459]  ? do_raw_spin_lock+0x1d0/0x1d0
  [   77.375893]  ? unix_peer_get+0xa0/0xa0
  [   77.376287]  ? __fget_light+0xa4/0xf0
  [   77.376670]  __sys_sendto+0x265/0x280
  [   77.377056]  ? __ia32_sys_getpeername+0x50/0x50
  [   77.377523]  ? lock_downgrade+0x350/0x350
  [   77.377940]  ? __sys_setsockopt+0x2a6/0x2c0
  [   77.378374]  ? sock_read_iter+0x240/0x240
  [   77.378789]  ? __sys_socketpair+0x22a/0x300
  [   77.379221]  ? __ia32_sys_socket+0x50/0x50
  [   77.379649]  ? mark_held_locks+0x1d/0x90
  [   77.380059]  ? trace_hardirqs_on_thunk+0x1a/0x1c
  [   77.380536]  __x64_sys_sendto+0x74/0x90
  [   77.380938]  do_syscall_64+0x68/0x2a0
  [   77.381324]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [   77.381878] RIP: 0033:0x44c070
  [...]

After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in f1174f77b50c ("bpf/verifier: rework value tracking").

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/verifier.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6039,6 +6039,7 @@ static bool may_access_skb(enum bpf_prog
 static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
 {
 	struct bpf_reg_state *regs = cur_regs(env);
+	static const int ctx_reg = BPF_REG_6;
 	u8 mode = BPF_MODE(insn->code);
 	int i, err;
 
@@ -6072,7 +6073,7 @@ static int check_ld_abs(struct bpf_verif
 	}
 
 	/* check whether implicit source operand (register R6) is readable */
-	err = check_reg_arg(env, BPF_REG_6, SRC_OP);
+	err = check_reg_arg(env, ctx_reg, SRC_OP);
 	if (err)
 		return err;
 
@@ -6091,7 +6092,7 @@ static int check_ld_abs(struct bpf_verif
 		return -EINVAL;
 	}
 
-	if (regs[BPF_REG_6].type != PTR_TO_CTX) {
+	if (regs[ctx_reg].type != PTR_TO_CTX) {
 		verbose(env,
 			"at the time of BPF_LD_ABS|IND R6 != pointer to skb\n");
 		return -EINVAL;
@@ -6104,6 +6105,10 @@ static int check_ld_abs(struct bpf_verif
 			return err;
 	}
 
+	err = check_ctx_reg(env, &regs[ctx_reg], ctx_reg);
+	if (err < 0)
+		return err;
+
 	/* reset caller saved regs to unreadable */
 	for (i = 0; i < CALLER_SAVED_REGS; i++) {
 		mark_reg_not_init(env, regs, caller_saved[i]);

[PATCH 5.4 003/165] ASoC: rt5682: fix i2c arbitration lost issue

[Greg Kroah-Hartman]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit bc094709de0192a756c6946a7c89c543243ae609 ]

This patch modified the HW initial setting to fix i2c arbitration lost issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index c50b75ce82e0..05e883a65d7a 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -72,6 +72,7 @@ struct rt5682_priv {
 static const struct reg_sequence patch_list[] = {
 	{RT5682_HP_IMP_SENS_CTRL_19, 0x1000},
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
+	{RT5682_I2C_CTRL, 0x000f},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -2481,6 +2482,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
 	mutex_lock(&rt5682->calibrate_mutex);
 
 	rt5682_reset(rt5682->regmap);
+	regmap_write(rt5682->regmap, RT5682_I2C_CTRL, 0x000f);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2af);
 	usleep_range(15000, 20000);
 	regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xf2af);
-- 
2.20.1

[PATCH 5.4 004/165] spi: pxa2xx: Add support for Intel Jasper Lake

[Greg Kroah-Hartman]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 2e73d75a6ac5..ae95ec0bc964 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1441,6 +1441,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
+	/* JSL */
+	{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
-- 
2.20.1

[PATCH 5.4 005/165] regulator: fix use after free issue

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit 4affd79a125ac91e6a53be843ea3960a8fc00cbb ]

This is caused by dereferencing 'rdev' after put_device() in
the _regulator_get()/_regulator_put() functions.
This patch just moves the put_device() down a bit to avoid the
issue.

Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 87bc06b386a0..d66404920976 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1937,8 +1937,8 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
 	regulator = create_regulator(rdev, dev, id);
 	if (regulator == NULL) {
 		regulator = ERR_PTR(-ENOMEM);
-		put_device(&rdev->dev);
 		module_put(rdev->owner);
+		put_device(&rdev->dev);
 		return regulator;
 	}
 
@@ -2059,13 +2059,13 @@ static void _regulator_put(struct regulator *regulator)
 
 	rdev->open_count--;
 	rdev->exclusive = 0;
-	put_device(&rdev->dev);
 	regulator_unlock(rdev);
 
 	kfree_const(regulator->supply_name);
 	kfree(regulator);
 
 	module_put(rdev->owner);
+	put_device(&rdev->dev);
 }
 
 /**
-- 
2.20.1

[PATCH 5.4 006/165] ASoC: max98090: fix possible race conditions

[Greg Kroah-Hartman]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 45dfbf56975994822cce00b7475732a49f8aefed ]

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 ++------
 sound/soc/codecs/max98090.h | 1 -
 2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f6bf4cfbea23..45da2b51543e 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2103,10 +2103,8 @@ static void max98090_pll_det_disable_work(struct work_struct *work)
 			    M98090_IULK_MASK, 0);
 }
 
-static void max98090_pll_work(struct work_struct *work)
+static void max98090_pll_work(struct max98090_priv *max98090)
 {
-	struct max98090_priv *max98090 =
-		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
 
 	if (!snd_soc_component_is_active(component))
@@ -2259,7 +2257,7 @@ static irqreturn_t max98090_interrupt(int irq, void *data)
 
 	if (active & M98090_ULK_MASK) {
 		dev_dbg(component->dev, "M98090_ULK_MASK\n");
-		schedule_work(&max98090->pll_work);
+		max98090_pll_work(max98090);
 	}
 
 	if (active & M98090_JDET_MASK) {
@@ -2422,7 +2420,6 @@ static int max98090_probe(struct snd_soc_component *component)
 			  max98090_pll_det_enable_work);
 	INIT_WORK(&max98090->pll_det_disable_work,
 		  max98090_pll_det_disable_work);
-	INIT_WORK(&max98090->pll_work, max98090_pll_work);
 
 	/* Enable jack detection */
 	snd_soc_component_write(component, M98090_REG_JACK_DETECT,
@@ -2475,7 +2472,6 @@ static void max98090_remove(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&max98090->jack_work);
 	cancel_delayed_work_sync(&max98090->pll_det_enable_work);
 	cancel_work_sync(&max98090->pll_det_disable_work);
-	cancel_work_sync(&max98090->pll_work);
 	max98090->component = NULL;
 }
 
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 57965cd678b4..a197114b0dad 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1530,7 +1530,6 @@ struct max98090_priv {
 	struct delayed_work jack_work;
 	struct delayed_work pll_det_enable_work;
 	struct work_struct pll_det_disable_work;
-	struct work_struct pll_work;
 	struct snd_soc_jack *jack;
 	unsigned int dai_fmt;
 	int tdm_slots;
-- 
2.20.1

[PATCH 5.4 007/165] spi: fsl: Fix GPIO descriptor support

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit f106904968e2a075e64653b9b79dda9f0f070ab5 ]

This makes the driver actually support looking up GPIO
descriptor. A coding mistake in the initial descriptor
support patch was that it was failing to turn on the very
feature it was implementing. Mea culpa.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 2d563874b4ac..ad1abea6e8b0 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -612,6 +612,7 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
 	master->setup = fsl_spi_setup;
 	master->cleanup = fsl_spi_cleanup;
 	master->transfer_one_message = fsl_spi_do_one_msg;
+	master->use_gpio_descriptors = true;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
 	mpc8xxx_spi->max_bits_per_word = 32;
-- 
2.20.1

[PATCH 5.4 008/165] gpio: Handle counting of Freescale chipselects

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 71b8f600b034c7f5780f6fb311dabfe331c64feb ]

We have a special quirk to handle the Freescale
nonstandard SPI chipselect GPIOs in the gpiolib-of.c
file, but it currently only handles the case where
the GPIOs are actually requested (gpiod_*get()).

We also need to handle that the SPI core attempts
to count the GPIOs before use, and that needs a
similar quirk in the OF part of the library.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-of.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 80ea49f570f4..43ffec3a6fbb 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -23,6 +23,29 @@
 #include "gpiolib.h"
 #include "gpiolib-of.h"
 
+/**
+ * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
+ * Some elder GPIO controllers need special quirks. Currently we handle
+ * the Freescale GPIO controller with bindings that doesn't use the
+ * established "cs-gpios" for chip selects but instead rely on
+ * "gpios" for the chip select lines. If we detect this, we redirect
+ * the counting of "cs-gpios" to count "gpios" transparent to the
+ * driver.
+ */
+int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!IS_ENABLED(CONFIG_SPI_MASTER))
+		return 0;
+	if (!con_id || strcmp(con_id, "cs"))
+		return 0;
+	if (!of_device_is_compatible(np, "fsl,spi") &&
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+		return 0;
+	return of_gpio_named_count(np, "gpios");
+}
+
 /*
  * This is used by external users of of_gpio_count() from <linux/of_gpio.h>
  *
@@ -35,6 +58,10 @@ int of_gpio_get_count(struct device *dev, const char *con_id)
 	char propname[32];
 	unsigned int i;
 
+	ret = of_gpio_spi_cs_get_count(dev, con_id);
+	if (ret > 0)
+		return ret;
+
 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
 		if (con_id)
 			snprintf(propname, sizeof(propname), "%s-%s",
-- 
2.20.1

[PATCH 5.4 009/165] spi: fsl: Handle the single hardwired chipselect case

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 7251953d784baf7e5416afabe030a0e81de1a938 ]

The Freescale MPC8xxx had a special quirk for handling a
single hardwired chipselect, the case when we're using neither
GPIO nor native chip select: when inspecting the device tree
and finding zero "cs-gpios" on the device node the code would
assume we have a single hardwired chipselect that leaves the
device always selected.

This quirk is not handled by the new core code, so we need
to check the "cs-gpios" explicitly in the driver and set
pdata->max_chipselect = 1 which will later fall through to
the SPI master ->num_chipselect.

Make sure not to assign the chip select handler in this
case: there is no handling needed since the chip is always
selected, and this is what the old code did as well.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> (No tested the
Link: https://lore.kernel.org/r/20191128083718.39177-3-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-spi.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index ad1abea6e8b0..be7c6ba73072 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -729,8 +729,18 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 			}
 		}
 #endif
-
-		pdata->cs_control = fsl_spi_cs_control;
+		/*
+		 * Handle the case where we have one hardwired (always selected)
+		 * device on the first "chipselect". Else we let the core code
+		 * handle any GPIOs or native chip selects and assign the
+		 * appropriate callback for dealing with the CS lines. This isn't
+		 * supported on the GRLIB variant.
+		 */
+		ret = gpiod_count(dev, "cs");
+		if (ret <= 0)
+			pdata->max_chipselect = 1;
+		else
+			pdata->cs_control = fsl_spi_cs_control;
 	}
 
 	ret = of_address_to_resource(np, 0, &mem);
-- 
2.20.1

[PATCH 5.4 010/165] locking/spinlock/debug: Fix various data races

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

[ Upstream commit 1a365e822372ba24c9da0822bc583894f6f3d821 ]

This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.

Example data race report:

  read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
   debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
   do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
   __raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
   _raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
   spin_lock include/linux/spinlock.h:338 [inline]
   get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
   get_partial_node mm/slub.c:1870 [inline]
  <snip>

  write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
   debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
   do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
   __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
   _raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
   spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
   free_debug_processing+0x1b3/0x210 mm/slub.c:1214
   __slab_free+0x292/0x400 mm/slub.c:2864
  <snip>

As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.

This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/spinlock_debug.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/kernel/locking/spinlock_debug.c b/kernel/locking/spinlock_debug.c
index 399669f7eba8..472dd462a40c 100644
--- a/kernel/locking/spinlock_debug.c
+++ b/kernel/locking/spinlock_debug.c
@@ -51,19 +51,19 @@ EXPORT_SYMBOL(__rwlock_init);
 
 static void spin_dump(raw_spinlock_t *lock, const char *msg)
 {
-	struct task_struct *owner = NULL;
+	struct task_struct *owner = READ_ONCE(lock->owner);
 
-	if (lock->owner && lock->owner != SPINLOCK_OWNER_INIT)
-		owner = lock->owner;
+	if (owner == SPINLOCK_OWNER_INIT)
+		owner = NULL;
 	printk(KERN_EMERG "BUG: spinlock %s on CPU#%d, %s/%d\n",
 		msg, raw_smp_processor_id(),
 		current->comm, task_pid_nr(current));
 	printk(KERN_EMERG " lock: %pS, .magic: %08x, .owner: %s/%d, "
 			".owner_cpu: %d\n",
-		lock, lock->magic,
+		lock, READ_ONCE(lock->magic),
 		owner ? owner->comm : "<none>",
 		owner ? task_pid_nr(owner) : -1,
-		lock->owner_cpu);
+		READ_ONCE(lock->owner_cpu));
 	dump_stack();
 }
 
@@ -80,16 +80,16 @@ static void spin_bug(raw_spinlock_t *lock, const char *msg)
 static inline void
 debug_spin_lock_before(raw_spinlock_t *lock)
 {
-	SPIN_BUG_ON(lock->magic != SPINLOCK_MAGIC, lock, "bad magic");
-	SPIN_BUG_ON(lock->owner == current, lock, "recursion");
-	SPIN_BUG_ON(lock->owner_cpu == raw_smp_processor_id(),
+	SPIN_BUG_ON(READ_ONCE(lock->magic) != SPINLOCK_MAGIC, lock, "bad magic");
+	SPIN_BUG_ON(READ_ONCE(lock->owner) == current, lock, "recursion");
+	SPIN_BUG_ON(READ_ONCE(lock->owner_cpu) == raw_smp_processor_id(),
 							lock, "cpu recursion");
 }
 
 static inline void debug_spin_lock_after(raw_spinlock_t *lock)
 {
-	lock->owner_cpu = raw_smp_processor_id();
-	lock->owner = current;
+	WRITE_ONCE(lock->owner_cpu, raw_smp_processor_id());
+	WRITE_ONCE(lock->owner, current);
 }
 
 static inline void debug_spin_unlock(raw_spinlock_t *lock)
@@ -99,8 +99,8 @@ static inline void debug_spin_unlock(raw_spinlock_t *lock)
 	SPIN_BUG_ON(lock->owner != current, lock, "wrong owner");
 	SPIN_BUG_ON(lock->owner_cpu != raw_smp_processor_id(),
 							lock, "wrong CPU");
-	lock->owner = SPINLOCK_OWNER_INIT;
-	lock->owner_cpu = -1;
+	WRITE_ONCE(lock->owner, SPINLOCK_OWNER_INIT);
+	WRITE_ONCE(lock->owner_cpu, -1);
 }
 
 /*
@@ -187,8 +187,8 @@ static inline void debug_write_lock_before(rwlock_t *lock)
 
 static inline void debug_write_lock_after(rwlock_t *lock)
 {
-	lock->owner_cpu = raw_smp_processor_id();
-	lock->owner = current;
+	WRITE_ONCE(lock->owner_cpu, raw_smp_processor_id());
+	WRITE_ONCE(lock->owner, current);
 }
 
 static inline void debug_write_unlock(rwlock_t *lock)
@@ -197,8 +197,8 @@ static inline void debug_write_unlock(rwlock_t *lock)
 	RWLOCK_BUG_ON(lock->owner != current, lock, "wrong owner");
 	RWLOCK_BUG_ON(lock->owner_cpu != raw_smp_processor_id(),
 							lock, "wrong CPU");
-	lock->owner = SPINLOCK_OWNER_INIT;
-	lock->owner_cpu = -1;
+	WRITE_ONCE(lock->owner, SPINLOCK_OWNER_INIT);
+	WRITE_ONCE(lock->owner_cpu, -1);
 }
 
 void do_raw_write_lock(rwlock_t *lock)
-- 
2.20.1

[PATCH 5.4 011/165] netfilter: ctnetlink: netns exit must wait for callbacks

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 18a110b022a5c02e7dc9f6109d0bd93e58ac6ebb ]

Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10
based kernel.

Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is
NULL.  The nfnl socket was set to NULL by netns destruction running on
another cpu.

The exiting network namespace calls the relevant destructors in the
following order:

1. ctnetlink_net_exit_batch

This nulls out the event callback pointer in struct netns.

2. nfnetlink_net_exit_batch

This nulls net->nfnl socket and frees it.

3. nf_conntrack_cleanup_net_list

This removes all remaining conntrack entries.

This is order is correct. The only explanation for the crash so ar is:

cpu1: conntrack is dying, eviction occurs:
 -> nf_ct_delete()
   -> nf_conntrack_event_report \
     -> nf_conntrack_eventmask_report
       -> notify->fcn() (== ctnetlink_conntrack_events).

cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback.
      b. gets interrupted.
 cpu2: runs netns exit handlers:
     a runs ctnetlink destructor, event cb pointer set to NULL.
     b runs nfnetlink destructor, nfnl socket is closed and set to NULL.
cpu1: c. resumes and trips over NULL net->nfnl.

Problem appears to be that ctnetlink_net_exit_batch only prevents future
callers of nf_conntrack_eventmask_report() from obtaining the callback.
It doesn't wait of other cpus that might have already obtained the
callbacks address.

I don't see anything in upstream kernels that would prevent similar
crash: We need to wait for all cpus to have exited the event callback.

Fixes: 9592a5c01e79dbc59eb56fa ("netfilter: ctnetlink: netns support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index e2d13cd18875..aa8adf930b3c 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -3602,6 +3602,9 @@ static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list)
 
 	list_for_each_entry(net, net_exit_list, exit_list)
 		ctnetlink_net_exit(net);
+
+	/* wait for other cpus until they are done with ctnl_notifiers */
+	synchronize_rcu();
 }
 
 static struct pernet_operations ctnetlink_net_ops = {
-- 
2.20.1

[PATCH 5.4 012/165] x86/intel: Disable HPET on Intel Ice Lake platforms

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit e0748539e3d594dd26f0d27a270f14720b22a406 ]

Like CFL and CFL-H, ICL SoC has skewed HPET timer once it hits PC10.
So let's disable HPET on ICL.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-2-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/early-quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 606711f5ebf8..2f9ec14be3b1 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -714,6 +714,8 @@ static struct chipset early_qrk[] __initdata = {
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_INTEL, 0x3ec4,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
+	{ PCI_VENDOR_ID_INTEL, 0x8a12,
+		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
 	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
 	  PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
 	{}
-- 
2.20.1

[PATCH 5.4 013/165] netfilter: nf_tables_offload: Check for the NETDEV_UNREGISTER event

[Greg Kroah-Hartman]

From: wenxu <wenxu@ucloud.cn>

[ Upstream commit d1f4c966475c6dd2545c6625022cb24e878bee11 ]

Check for the NETDEV_UNREGISTER event from the nft_offload_netdev_event
function, which is the event that actually triggers the clean up.

Fixes: 06d392cbe3db ("netfilter: nf_tables_offload: remove rules when the device unregisters")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_offload.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 5f6037695dee..6f7eab502e65 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -446,6 +446,9 @@ static int nft_offload_netdev_event(struct notifier_block *this,
 	struct net *net = dev_net(dev);
 	struct nft_chain *chain;
 
+	if (event != NETDEV_UNREGISTER)
+		return NOTIFY_DONE;
+
 	mutex_lock(&net->nft.commit_mutex);
 	chain = __nft_offload_get_chain(dev);
 	if (chain)
-- 
2.20.1

[PATCH 5.4 014/165] mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()

[Greg Kroah-Hartman]

From: qize wang <wangqize888888888@gmail.com>

[ Upstream commit 1e58252e334dc3f3756f424a157d1b7484464c40 ]

mwifiex_process_tdls_action_frame() without checking
the incoming tdls infomation element's vality before use it,
this may cause multi heap buffer overflows.

Fix them by putting vality check before use it.

IE is TLV struct, but ht_cap and  ht_oper aren’t TLV struct.
the origin marvell driver code is wrong:

memcpy(&sta_ptr->tdls_cap.ht_oper, pos,....
memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,...

Fix the bug by changing pos(the address of IE) to
pos+2 ( the address of IE value ).

Signed-off-by: qize wang <wangqize888888888@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/tdls.c | 70 +++++++++++++++++++--
 1 file changed, 64 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/tdls.c b/drivers/net/wireless/marvell/mwifiex/tdls.c
index 09313047beed..7caf1d26124a 100644
--- a/drivers/net/wireless/marvell/mwifiex/tdls.c
+++ b/drivers/net/wireless/marvell/mwifiex/tdls.c
@@ -953,59 +953,117 @@ void mwifiex_process_tdls_action_frame(struct mwifiex_private *priv,
 
 		switch (*pos) {
 		case WLAN_EID_SUPP_RATES:
+			if (pos[1] > 32)
+				return;
 			sta_ptr->tdls_cap.rates_len = pos[1];
 			for (i = 0; i < pos[1]; i++)
 				sta_ptr->tdls_cap.rates[i] = pos[i + 2];
 			break;
 
 		case WLAN_EID_EXT_SUPP_RATES:
+			if (pos[1] > 32)
+				return;
 			basic = sta_ptr->tdls_cap.rates_len;
+			if (pos[1] > 32 - basic)
+				return;
 			for (i = 0; i < pos[1]; i++)
 				sta_ptr->tdls_cap.rates[basic + i] = pos[i + 2];
 			sta_ptr->tdls_cap.rates_len += pos[1];
 			break;
 		case WLAN_EID_HT_CAPABILITY:
-			memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,
+			if (pos > end - sizeof(struct ieee80211_ht_cap) - 2)
+				return;
+			if (pos[1] != sizeof(struct ieee80211_ht_cap))
+				return;
+			/* copy the ie's value into ht_capb*/
+			memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos + 2,
 			       sizeof(struct ieee80211_ht_cap));
 			sta_ptr->is_11n_enabled = 1;
 			break;
 		case WLAN_EID_HT_OPERATION:
-			memcpy(&sta_ptr->tdls_cap.ht_oper, pos,
+			if (pos > end -
+			    sizeof(struct ieee80211_ht_operation) - 2)
+				return;
+			if (pos[1] != sizeof(struct ieee80211_ht_operation))
+				return;
+			/* copy the ie's value into ht_oper*/
+			memcpy(&sta_ptr->tdls_cap.ht_oper, pos + 2,
 			       sizeof(struct ieee80211_ht_operation));
 			break;
 		case WLAN_EID_BSS_COEX_2040:
+			if (pos > end - 3)
+				return;
+			if (pos[1] != 1)
+				return;
 			sta_ptr->tdls_cap.coex_2040 = pos[2];
 			break;
 		case WLAN_EID_EXT_CAPABILITY:
+			if (pos > end - sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] < sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] > 8)
+				return;
 			memcpy((u8 *)&sta_ptr->tdls_cap.extcap, pos,
 			       sizeof(struct ieee_types_header) +
 			       min_t(u8, pos[1], 8));
 			break;
 		case WLAN_EID_RSN:
+			if (pos > end - sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] < sizeof(struct ieee_types_header))
+				return;
+			if (pos[1] > IEEE_MAX_IE_SIZE -
+			    sizeof(struct ieee_types_header))
+				return;
 			memcpy((u8 *)&sta_ptr->tdls_cap.rsn_ie, pos,
 			       sizeof(struct ieee_types_header) +
 			       min_t(u8, pos[1], IEEE_MAX_IE_SIZE -
 				     sizeof(struct ieee_types_header)));
 			break;
 		case WLAN_EID_QOS_CAPA:
+			if (pos > end - 3)
+				return;
+			if (pos[1] != 1)
+				return;
 			sta_ptr->tdls_cap.qos_info = pos[2];
 			break;
 		case WLAN_EID_VHT_OPERATION:
-			if (priv->adapter->is_hw_11ac_capable)
-				memcpy(&sta_ptr->tdls_cap.vhtoper, pos,
+			if (priv->adapter->is_hw_11ac_capable) {
+				if (pos > end -
+				    sizeof(struct ieee80211_vht_operation) - 2)
+					return;
+				if (pos[1] !=
+				    sizeof(struct ieee80211_vht_operation))
+					return;
+				/* copy the ie's value into vhtoper*/
+				memcpy(&sta_ptr->tdls_cap.vhtoper, pos + 2,
 				       sizeof(struct ieee80211_vht_operation));
+			}
 			break;
 		case WLAN_EID_VHT_CAPABILITY:
 			if (priv->adapter->is_hw_11ac_capable) {
-				memcpy((u8 *)&sta_ptr->tdls_cap.vhtcap, pos,
+				if (pos > end -
+				    sizeof(struct ieee80211_vht_cap) - 2)
+					return;
+				if (pos[1] != sizeof(struct ieee80211_vht_cap))
+					return;
+				/* copy the ie's value into vhtcap*/
+				memcpy((u8 *)&sta_ptr->tdls_cap.vhtcap, pos + 2,
 				       sizeof(struct ieee80211_vht_cap));
 				sta_ptr->is_11ac_enabled = 1;
 			}
 			break;
 		case WLAN_EID_AID:
-			if (priv->adapter->is_hw_11ac_capable)
+			if (priv->adapter->is_hw_11ac_capable) {
+				if (pos > end - 4)
+					return;
+				if (pos[1] != 2)
+					return;
 				sta_ptr->tdls_cap.aid =
 					get_unaligned_le16((pos + 2));
+			}
+			break;
 		default:
 			break;
 		}
-- 
2.20.1

[PATCH 5.4 015/165] libtraceevent: Fix lib installation with O=

[Greg Kroah-Hartman]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit 587db8ebdac2c5eb3a8851e16b26f2e2711ab797 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:

  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.a
  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0

  cp: cannot stat 'libtraceevent.a': No such file or directory
  Makefile:225: recipe for target 'install_lib' failed
  make: *** [install_lib] Error 1

I used the command:

  make O=../../../obj-trace DESTDIR=~/test prefix==/usr  install

It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.

So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index 5315f3787f8d..d008e64042ce 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -97,6 +97,7 @@ EVENT_PARSE_VERSION = $(EP_VERSION).$(EP_PATCHLEVEL).$(EP_EXTRAVERSION)
 
 LIB_TARGET  = libtraceevent.a libtraceevent.so.$(EVENT_PARSE_VERSION)
 LIB_INSTALL = libtraceevent.a libtraceevent.so*
+LIB_INSTALL := $(addprefix $(OUTPUT),$(LIB_INSTALL))
 
 INCLUDES = -I. -I $(srctree)/tools/include $(CONFIG_INCLUDES)
 
-- 
2.20.1

[PATCH 5.4 016/165] libtraceevent: Copy pkg-config file to output folder when using O=

[Greg Kroah-Hartman]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit 15b3904f8e884e0d34d5f09906cf6526d0b889a2 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index d008e64042ce..ecf882308d8a 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -208,10 +208,11 @@ define do_install
 	$(INSTALL) $(if $3,-m $3,) $1 '$(DESTDIR_SQ)$2'
 endef
 
-PKG_CONFIG_FILE = libtraceevent.pc
+PKG_CONFIG_SOURCE_FILE = libtraceevent.pc
+PKG_CONFIG_FILE := $(addprefix $(OUTPUT),$(PKG_CONFIG_SOURCE_FILE))
 define do_install_pkgconfig_file
 	if [ -n "${pkgconfig_dir}" ]; then 					\
-		cp -f ${PKG_CONFIG_FILE}.template ${PKG_CONFIG_FILE}; 		\
+		cp -f ${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE};	\
 		sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; 		\
 		sed -i "s|LIB_VERSION|${EVENT_PARSE_VERSION}|g" ${PKG_CONFIG_FILE}; \
 		sed -i "s|LIB_DIR|${libdir}|g" ${PKG_CONFIG_FILE}; \
-- 
2.20.1

[PATCH 5.4 017/165] regulator: core: fix regulator_register() error paths to properly release rdev

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit a3cde9534ebdafe18a9bbab208df724c57e6c8e8 ]

There are several issues with the error handling code of
the regulator_register() function:
        ret = device_register(&rdev->dev);
        if (ret != 0) {
                put_device(&rdev->dev); --> rdev released
                goto unset_supplies;
        }
...
unset_supplies:
...
        unset_regulator_supplies(rdev); --> use-after-free
...
clean:
        if (dangling_of_gpiod)
                gpiod_put(config->ena_gpiod);
        kfree(rdev);                     --> double free

We add a variable to record the failure of device_register() and
move put_device() down a bit to avoid the above issues.

Fixes: c438b9d01736 ("regulator: core: Move registration of regulator device")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191201030250.38074-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d66404920976..1dba0bdf3762 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4992,6 +4992,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	struct regulator_dev *rdev;
 	bool dangling_cfg_gpiod = false;
 	bool dangling_of_gpiod = false;
+	bool reg_device_fail = false;
 	struct device *dev;
 	int ret, i;
 
@@ -5177,7 +5178,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	dev_set_drvdata(&rdev->dev, rdev);
 	ret = device_register(&rdev->dev);
 	if (ret != 0) {
-		put_device(&rdev->dev);
+		reg_device_fail = true;
 		goto unset_supplies;
 	}
 
@@ -5208,7 +5209,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
 clean:
 	if (dangling_of_gpiod)
 		gpiod_put(config->ena_gpiod);
-	kfree(rdev);
+	if (reg_device_fail)
+		put_device(&rdev->dev);
+	else
+		kfree(rdev);
 	kfree(config);
 rinse:
 	if (dangling_cfg_gpiod)
-- 
2.20.1

[PATCH 5.4 018/165] x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

[Greg Kroah-Hartman]

From: Dave Young <dyoung@redhat.com>

[ Upstream commit af164898482817a1d487964b68f3c21bae7a1beb ]

Michael Weiser reported that he got this error during a kexec rebooting:

  esrt: Unsupported ESRT version 2904149718861218184.

The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve().  The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.

But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.

Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.

Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.

But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.

On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.

[ mingo: Edited the changelog. ]

Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/quirks.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 3b9fd679cea9..aefe845dff59 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -260,10 +260,6 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 		return;
 	}
 
-	/* No need to reserve regions that will never be freed. */
-	if (md.attribute & EFI_MEMORY_RUNTIME)
-		return;
-
 	size += addr % EFI_PAGE_SIZE;
 	size = round_up(size, EFI_PAGE_SIZE);
 	addr = round_down(addr, EFI_PAGE_SIZE);
@@ -293,6 +289,8 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
 	early_memunmap(new, new_size);
 
 	efi_memmap_install(new_phys, num_entries);
+	e820__range_update(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
+	e820__update_table(e820_table);
 }
 
 /*
-- 
2.20.1

[PATCH 5.4 019/165] ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index dd2b5ad08659..243f683bc02a 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -707,13 +707,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MCLK_EN),
 	},
 	{
+		/* Teclast X89 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
 			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN3_MAP |
-					BYT_RT5640_MCLK_EN |
-					BYT_RT5640_SSP0_AIF1),
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_1P0 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
 	},
 	{	/* Toshiba Satellite Click Mini L9W-B */
 		.matches = {
-- 
2.20.1

[PATCH 5.4 020/165] selftests: netfilter: use randomized netns names

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d ]

Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.

Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++---------
 1 file changed, 176 insertions(+), 156 deletions(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 1be55e705780..d7e07f4c3d7f 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -8,9 +8,14 @@ ksft_skip=4
 ret=0
 test_inet_nat=true
 
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+
 cleanup()
 {
-	for i in 0 1 2; do ip netns del ns$i;done
+	for i in 0 1 2; do ip netns del ns$i-"$sfx";done
 }
 
 nft --version > /dev/null 2>&1
@@ -25,40 +30,49 @@ if [ $? -ne 0 ];then
 	exit $ksft_skip
 fi
 
-ip netns add ns0
+ip netns add "$ns0"
 if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
+	echo "SKIP: Could not create net namespace $ns0"
 	exit $ksft_skip
 fi
 
 trap cleanup EXIT
 
-ip netns add ns1
-ip netns add ns2
+ip netns add "$ns1"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns1"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns2"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns2"
+	exit $ksft_skip
+fi
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
 if [ $? -ne 0 ];then
     echo "SKIP: No virtual ethernet pair device support in kernel"
     exit $ksft_skip
 fi
-ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
 
-ip -net ns0 link set lo up
-ip -net ns0 link set veth0 up
-ip -net ns0 addr add 10.0.1.1/24 dev veth0
-ip -net ns0 addr add dead:1::1/64 dev veth0
+ip -net "$ns0" link set lo up
+ip -net "$ns0" link set veth0 up
+ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0
 
-ip -net ns0 link set veth1 up
-ip -net ns0 addr add 10.0.2.1/24 dev veth1
-ip -net ns0 addr add dead:2::1/64 dev veth1
+ip -net "$ns0" link set veth1 up
+ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
+ip -net "$ns0" addr add dead:2::1/64 dev veth1
 
 for i in 1 2; do
-  ip -net ns$i link set lo up
-  ip -net ns$i link set eth0 up
-  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
-  ip -net ns$i route add default via 10.0.$i.1
-  ip -net ns$i addr add dead:$i::99/64 dev eth0
-  ip -net ns$i route add default via dead:$i::1
+  ip -net ns$i-$sfx link set lo up
+  ip -net ns$i-$sfx link set eth0 up
+  ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i-$sfx route add default via 10.0.$i.1
+  ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
+  ip -net ns$i-$sfx route add default via dead:$i::1
 done
 
 bad_counter()
@@ -66,8 +80,9 @@ bad_counter()
 	local ns=$1
 	local counter=$2
 	local expect=$3
+	local tag=$4
 
-	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
 	ip netns exec $ns nft list counter inet filter $counter 1>&2
 }
 
@@ -78,24 +93,24 @@ check_counters()
 
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in "packets 1 bytes 84"
+		bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
 		lret=1
 	fi
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out "packets 1 bytes 84"
+		bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0in6 "$expect"
+		bad_counter $ns ns0in6 "$expect" "check_counters 3"
 		lret=1
 	fi
 	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
 	if [ $? -ne 0 ]; then
-		bad_counter $ns ns0out6 "$expect"
+		bad_counter $ns ns0out6 "$expect" "check_counters 4"
 		lret=1
 	fi
 
@@ -107,41 +122,41 @@ check_ns0_counters()
 	local ns=$1
 	local lret=0
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0in "packets 0 bytes 0"
+		bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0in6 "packets 0 bytes 0"
+		bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
 		lret=1
 	fi
 
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0out "packets 0 bytes 0"
+		bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
 		lret=1
 	fi
-	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
 	if [ $? -ne 0 ]; then
-		bad_counter ns0 ns0out6 "packets 0 bytes 0"
+		bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
 		lret=1
 	fi
 
 	for dir in "in" "out" ; do
 		expect="packets 1 bytes 84"
-		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 $ns$dir "$expect"
+			bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
 			lret=1
 		fi
 
 		expect="packets 1 bytes 104"
-		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 $ns$dir6 "$expect"
+			bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
 			lret=1
 		fi
 	done
@@ -152,7 +167,7 @@ check_ns0_counters()
 reset_counters()
 {
 	for i in 0 1 2;do
-		ip netns exec ns$i nft reset counters inet > /dev/null
+		ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
 	done
 }
 
@@ -166,7 +181,7 @@ test_local_dnat6()
 		IPF="ip6"
 	fi
 
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain output {
 		type nat hook output priority 0; policy accept;
@@ -180,7 +195,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping6 failed"
@@ -189,18 +204,18 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
 			lret=1
 		fi
 	done
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
 			lret=1
 		fi
 	done
@@ -208,9 +223,9 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
 			lret=1
 		fi
 	done
@@ -218,15 +233,15 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns0$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2"
-	ip netns exec ns0 nft flush chain ip6 nat output
+	test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2"
+	ip netns exec "$ns0" nft flush chain ip6 nat output
 
 	return $lret
 }
@@ -241,7 +256,7 @@ test_local_dnat()
 		IPF="ip"
 	fi
 
-ip netns exec ns0 nft -f - <<EOF 2>/dev/null
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null
 table $family nat {
 	chain output {
 		type nat hook output priority 0; policy accept;
@@ -260,7 +275,7 @@ EOF
 	fi
 
 	# ping netns1, expect rewrite to netns2
-	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping failed"
@@ -269,18 +284,18 @@ EOF
 
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
 			lret=1
 		fi
 	done
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
 			lret=1
 		fi
 	done
@@ -288,9 +303,9 @@ EOF
 	# expect 0 count in ns1
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
 			lret=1
 		fi
 	done
@@ -298,19 +313,19 @@ EOF
 	# expect 1 packet in ns2
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns0$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2"
+	test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
 
-	ip netns exec ns0 nft flush chain $family nat output
+	ip netns exec "$ns0" nft flush chain $family nat output
 
 	reset_counters
-	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
 	if [ $? -ne 0 ]; then
 		lret=1
 		echo "ERROR: ping failed"
@@ -319,17 +334,17 @@ EOF
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns1$dir "$expect"
+			bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
 			lret=1
 		fi
 	done
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns2$dir "$expect"
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
 			lret=1
 		fi
 	done
@@ -337,9 +352,9 @@ EOF
 	# expect 1 count in ns1
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns0 ns0$dir "$expect"
+			bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
 			lret=1
 		fi
 	done
@@ -347,14 +362,14 @@ EOF
 	# expect 0 packet in ns2
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns2$dir "$expect"
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
 			lret=1
 		fi
 	done
 
-	test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush"
+	test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush"
 
 	return $lret
 }
@@ -366,26 +381,26 @@ test_masquerade6()
 	local natflags=$2
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
 		return 1
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
 			lret=1
 		fi
 	done
@@ -393,7 +408,7 @@ test_masquerade6()
 	reset_counters
 
 # add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain postrouting {
 		type nat hook postrouting priority 0; policy accept;
@@ -406,24 +421,24 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
 
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
 			lret=1
 		fi
 	done
@@ -431,32 +446,32 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec ns0 nft flush chain $family nat postrouting
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2"
+	test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2"
 
 	return $lret
 }
@@ -467,26 +482,26 @@ test_masquerade()
 	local natflags=$2
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 $natflags"
+		echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
 			lret=1
 		fi
 	done
@@ -494,7 +509,7 @@ test_masquerade()
 	reset_counters
 
 # add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain postrouting {
 		type nat hook postrouting priority 0; policy accept;
@@ -507,24 +522,24 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
 		lret=1
 	fi
 
 	# ns1 should have seen packets from ns0, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
 			lret=1
 		fi
 	done
@@ -532,32 +547,32 @@ EOF
 	# ns1 should not have seen packets from ns2, due to masquerade
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
 		lret=1
 	fi
 
-	ip netns exec ns0 nft flush chain $family nat postrouting
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not flush $family nat postrouting" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2"
+	test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2"
 
 	return $lret
 }
@@ -567,25 +582,25 @@ test_redirect6()
 	local family=$1
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+		echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
 			lret=1
 		fi
 	done
@@ -593,7 +608,7 @@ test_redirect6()
 	reset_counters
 
 # add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain prerouting {
 		type nat hook prerouting priority 0; policy accept;
@@ -606,18 +621,18 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect"
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
 		lret=1
 	fi
 
 	# ns1 should have seen no packets from ns2, due to redirection
 	expect="packets 0 bytes 0"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
 			lret=1
 		fi
 	done
@@ -625,20 +640,20 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 104"
 	for dir in "in6" "out6" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns0 nft delete table $family nat
+	ip netns exec "$ns0" nft delete table $family nat
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2"
+	test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2"
 
 	return $lret
 }
@@ -648,26 +663,26 @@ test_redirect()
 	local family=$1
 	local lret=0
 
-	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2"
+		echo "ERROR: cannot ping $ns1 from $ns2"
 		lret=1
 	fi
 
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns2$dir "$expect"
+			bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
 			lret=1
 		fi
 
-		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns2 ns1$dir "$expect"
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
 			lret=1
 		fi
 	done
@@ -675,7 +690,7 @@ test_redirect()
 	reset_counters
 
 # add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
 table $family nat {
 	chain prerouting {
 		type nat hook prerouting priority 0; policy accept;
@@ -688,9 +703,9 @@ EOF
 		return $ksft_skip
 	fi
 
-	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
 	if [ $? -ne 0 ] ; then
-		echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect"
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
 		lret=1
 	fi
 
@@ -698,9 +713,9 @@ EOF
 	expect="packets 0 bytes 0"
 	for dir in "in" "out" ; do
 
-		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
 			lret=1
 		fi
 	done
@@ -708,28 +723,28 @@ EOF
 	# ns0 should have seen packets from ns2, due to masquerade
 	expect="packets 1 bytes 84"
 	for dir in "in" "out" ; do
-		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
 		if [ $? -ne 0 ]; then
-			bad_counter ns1 ns0$dir "$expect"
+			bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
 			lret=1
 		fi
 	done
 
-	ip netns exec ns0 nft delete table $family nat
+	ip netns exec "$ns0" nft delete table $family nat
 	if [ $? -ne 0 ]; then
 		echo "ERROR: Could not delete $family nat table" 1>&2
 		lret=1
 	fi
 
-	test $lret -eq 0 && echo "PASS: $family IP redirection for ns2"
+	test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2"
 
 	return $lret
 }
 
 
-# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
 for i in 0 1 2; do
-ip netns exec ns$i nft -f - <<EOF
+ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
 table inet filter {
 	counter ns0in {}
 	counter ns1in {}
@@ -796,18 +811,18 @@ done
 sleep 3
 # test basic connectivity
 for i in 1 2; do
-  ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+  ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
   if [ $? -ne 0 ];then
   	echo "ERROR: Could not reach other namespace(s)" 1>&2
 	ret=1
   fi
 
-  ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+  ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
   if [ $? -ne 0 ];then
 	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
 	ret=1
   fi
-  check_counters ns$i
+  check_counters ns$i-$sfx
   if [ $? -ne 0 ]; then
 	ret=1
   fi
@@ -820,7 +835,7 @@ for i in 1 2; do
 done
 
 if [ $ret -eq 0 ];then
-	echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+	echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
 fi
 
 reset_counters
@@ -846,4 +861,9 @@ reset_counters
 $test_inet_nat && test_redirect inet
 $test_inet_nat && test_redirect6 inet
 
+if [ $ret -ne 0 ];then
+	echo -n "FAIL: "
+	nft --version
+fi
+
 exit $ret
-- 
2.20.1

[PATCH 5.4 021/165] efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 6fc3cec30dfeee7d3c5db8154016aff9d65503c5 ]

If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.

Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 0101ca4c13b1..08f3c1a2fb48 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -119,7 +119,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	u64 fb_base;
 	struct efi_pixel_bitmask pixel_info;
 	int pixel_format;
-	efi_status_t status = EFI_NOT_FOUND;
+	efi_status_t status;
 	u32 *handles = (u32 *)(unsigned long)gop_handle;
 	int i;
 
@@ -175,7 +175,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	/* Did we find any GOPs? */
 	if (!first_gop)
-		goto out;
+		return EFI_NOT_FOUND;
 
 	/* EFI framebuffer */
 	si->orig_video_isVGA = VIDEO_TYPE_EFI;
@@ -197,7 +197,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	si->lfb_size = si->lfb_linelength * si->lfb_height;
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
-out:
+
 	return status;
 }
 
@@ -237,7 +237,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	u64 fb_base;
 	struct efi_pixel_bitmask pixel_info;
 	int pixel_format;
-	efi_status_t status = EFI_NOT_FOUND;
+	efi_status_t status;
 	u64 *handles = (u64 *)(unsigned long)gop_handle;
 	int i;
 
@@ -293,7 +293,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	/* Did we find any GOPs? */
 	if (!first_gop)
-		goto out;
+		return EFI_NOT_FOUND;
 
 	/* EFI framebuffer */
 	si->orig_video_isVGA = VIDEO_TYPE_EFI;
@@ -315,7 +315,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	si->lfb_size = si->lfb_linelength * si->lfb_height;
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
-out:
+
 	return status;
 }
 
-- 
2.20.1

[PATCH 5.4 022/165] efi/gop: Return EFI_SUCCESS if a usable GOP was found

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit dbd89c303b4420f6cdb689fd398349fc83b059dd ]

If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.

Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 08f3c1a2fb48..69b2b019a1d0 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -198,7 +198,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
 
-	return status;
+	return EFI_SUCCESS;
 }
 
 static efi_status_t
@@ -316,7 +316,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
 
-	return status;
+	return EFI_SUCCESS;
 }
 
 /*
-- 
2.20.1

[PATCH 5.4 023/165] efi/gop: Fix memory leak in __gop_query32/64()

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit ff397be685e410a59c34b21ce0c55d4daa466bb7 ]

efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.

We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.

Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/gop.c | 66 ++++++------------------------
 1 file changed, 12 insertions(+), 54 deletions(-)

diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
index 69b2b019a1d0..b7bf1e993b8b 100644
--- a/drivers/firmware/efi/libstub/gop.c
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -83,30 +83,6 @@ setup_pixel_info(struct screen_info *si, u32 pixels_per_scan_line,
 	}
 }
 
-static efi_status_t
-__gop_query32(efi_system_table_t *sys_table_arg,
-	      struct efi_graphics_output_protocol_32 *gop32,
-	      struct efi_graphics_output_mode_info **info,
-	      unsigned long *size, u64 *fb_base)
-{
-	struct efi_graphics_output_protocol_mode_32 *mode;
-	efi_graphics_output_protocol_query_mode query_mode;
-	efi_status_t status;
-	unsigned long m;
-
-	m = gop32->mode;
-	mode = (struct efi_graphics_output_protocol_mode_32 *)m;
-	query_mode = (void *)(unsigned long)gop32->query_mode;
-
-	status = __efi_call_early(query_mode, (void *)gop32, mode->mode, size,
-				  info);
-	if (status != EFI_SUCCESS)
-		return status;
-
-	*fb_base = mode->frame_buffer_base;
-	return status;
-}
-
 static efi_status_t
 setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
             efi_guid_t *proto, unsigned long size, void **gop_handle)
@@ -128,6 +104,7 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	nr_gops = size / sizeof(u32);
 	for (i = 0; i < nr_gops; i++) {
+		struct efi_graphics_output_protocol_mode_32 *mode;
 		struct efi_graphics_output_mode_info *info = NULL;
 		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
 		bool conout_found = false;
@@ -145,9 +122,11 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query32(sys_table_arg, gop32, &info, &size,
-				       &current_fb_base);
-		if (status == EFI_SUCCESS && (!first_gop || conout_found) &&
+		mode = (void *)(unsigned long)gop32->mode;
+		info = (void *)(unsigned long)mode->info;
+		current_fb_base = mode->frame_buffer_base;
+
+		if ((!first_gop || conout_found) &&
 		    info->pixel_format != PIXEL_BLT_ONLY) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
@@ -201,30 +180,6 @@ setup_gop32(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	return EFI_SUCCESS;
 }
 
-static efi_status_t
-__gop_query64(efi_system_table_t *sys_table_arg,
-	      struct efi_graphics_output_protocol_64 *gop64,
-	      struct efi_graphics_output_mode_info **info,
-	      unsigned long *size, u64 *fb_base)
-{
-	struct efi_graphics_output_protocol_mode_64 *mode;
-	efi_graphics_output_protocol_query_mode query_mode;
-	efi_status_t status;
-	unsigned long m;
-
-	m = gop64->mode;
-	mode = (struct efi_graphics_output_protocol_mode_64 *)m;
-	query_mode = (void *)(unsigned long)gop64->query_mode;
-
-	status = __efi_call_early(query_mode, (void *)gop64, mode->mode, size,
-				  info);
-	if (status != EFI_SUCCESS)
-		return status;
-
-	*fb_base = mode->frame_buffer_base;
-	return status;
-}
-
 static efi_status_t
 setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 	    efi_guid_t *proto, unsigned long size, void **gop_handle)
@@ -246,6 +201,7 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 
 	nr_gops = size / sizeof(u64);
 	for (i = 0; i < nr_gops; i++) {
+		struct efi_graphics_output_protocol_mode_64 *mode;
 		struct efi_graphics_output_mode_info *info = NULL;
 		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
 		bool conout_found = false;
@@ -263,9 +219,11 @@ setup_gop64(efi_system_table_t *sys_table_arg, struct screen_info *si,
 		if (status == EFI_SUCCESS)
 			conout_found = true;
 
-		status = __gop_query64(sys_table_arg, gop64, &info, &size,
-				       &current_fb_base);
-		if (status == EFI_SUCCESS && (!first_gop || conout_found) &&
+		mode = (void *)(unsigned long)gop64->mode;
+		info = (void *)(unsigned long)mode->info;
+		current_fb_base = mode->frame_buffer_base;
+
+		if ((!first_gop || conout_found) &&
 		    info->pixel_format != PIXEL_BLT_ONLY) {
 			/*
 			 * Systems that use the UEFI Console Splitter may
-- 
2.20.1

[PATCH 5.4 024/165] efi/earlycon: Remap entire framebuffer after page initialization

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit b418d660bb9798d2249ac6a46c844389ef50b6a5 ]

When commit:

  69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")

moved the x86 specific EFI earlyprintk implementation to a shared location,
it also tweaked the behaviour. In particular, it dropped a trick with full
framebuffer remapping after page initialization, leading to two regressions:

  1) very slow scrolling after page initialization,
  2) kernel hang when the 'keep_bootcon' command line argument is passed.

Putting the tweak back fixes #2 and mitigates #1, i.e., it limits the slow
behavior to the early boot stages, presumably due to eliminating heavy
map()/unmap() operations per each pixel line on the screen.

 [ ardb: ensure efifb is unmapped again unless keep_bootcon is in effect. ]
 [ mingo: speling fixes. ]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Fixes: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Link: https://lkml.kernel.org/r/20191206165542.31469-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/earlycon.c | 40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c
index c9a0efca17b0..d4077db6dc97 100644
--- a/drivers/firmware/efi/earlycon.c
+++ b/drivers/firmware/efi/earlycon.c
@@ -13,18 +13,57 @@
 
 #include <asm/early_ioremap.h>
 
+static const struct console *earlycon_console __initdata;
 static const struct font_desc *font;
 static u32 efi_x, efi_y;
 static u64 fb_base;
 static pgprot_t fb_prot;
+static void *efi_fb;
+
+/*
+ * EFI earlycon needs to use early_memremap() to map the framebuffer.
+ * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
+ * memremap() should be used instead. memremap() will be available after
+ * paging_init() which is earlier than initcall callbacks. Thus adding this
+ * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
+ */
+static int __init efi_earlycon_remap_fb(void)
+{
+	/* bail if there is no bootconsole or it has been disabled already */
+	if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
+		return 0;
+
+	if (pgprot_val(fb_prot) == pgprot_val(PAGE_KERNEL))
+		efi_fb = memremap(fb_base, screen_info.lfb_size, MEMREMAP_WB);
+	else
+		efi_fb = memremap(fb_base, screen_info.lfb_size, MEMREMAP_WC);
+
+	return efi_fb ? 0 : -ENOMEM;
+}
+early_initcall(efi_earlycon_remap_fb);
+
+static int __init efi_earlycon_unmap_fb(void)
+{
+	/* unmap the bootconsole fb unless keep_bootcon has left it enabled */
+	if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
+		memunmap(efi_fb);
+	return 0;
+}
+late_initcall(efi_earlycon_unmap_fb);
 
 static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
 {
+	if (efi_fb)
+		return efi_fb + start;
+
 	return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
 }
 
 static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
 {
+	if (efi_fb)
+		return;
+
 	early_memunmap(addr, len);
 }
 
@@ -201,6 +240,7 @@ static int __init efi_earlycon_setup(struct earlycon_device *device,
 		efi_earlycon_scroll_up();
 
 	device->con->write = efi_earlycon_write;
+	earlycon_console = device->con;
 	return 0;
 }
 EARLYCON_DECLARE(efifb, efi_earlycon_setup);
-- 
2.20.1

[PATCH 5.4 025/165] ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

[Greg Kroah-Hartman]

From: Stefan Roese <sr@denx.de>

[ Upstream commit 0aeb1f2b74f3402e9cdb7c0b8e2c369c9767301e ]

Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.

Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c2a9dd57e56a..aa86341adaaa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -215,7 +215,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
-- 
2.20.1

[PATCH 5.4 026/165] ARM: vexpress: Set-up shared OPP table instead of individual for each CPU

[Greg Kroah-Hartman]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 2a76352ad2cc6b78e58f737714879cc860903802 ]

Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.

We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.

Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/spc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1da11bdb1dfb 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 static int __init ve_spc_clk_init(void)
 {
-	int cpu;
+	int cpu, cluster;
 	struct clk *clk;
+	bool init_opp_table[MAX_CLUSTERS] = { false };
 
 	if (!info)
 		return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
 			continue;
 		}
 
+		cluster = topology_physical_package_id(cpu_dev->id);
+		if (init_opp_table[cluster])
+			continue;
+
 		if (ve_init_opp_table(cpu_dev))
 			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+		else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+			 topology_core_cpumask(cpu_dev->id)))
+			pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+		else
+			init_opp_table[cluster] = true;
 	}
 
 	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
-- 
2.20.1

[PATCH 5.4 027/165] netfilter: uapi: Avoid undefined left-shift in xt_sctp.h

[Greg Kroah-Hartman]

From: Phil Sutter <phil@nwl.cc>

[ Upstream commit 164166558aacea01b99c8c8ffb710d930405ba69 ]

With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/xt_sctp.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/netfilter/xt_sctp.h b/include/uapi/linux/netfilter/xt_sctp.h
index 4bc6d1a08781..b4d804a9fccb 100644
--- a/include/uapi/linux/netfilter/xt_sctp.h
+++ b/include/uapi/linux/netfilter/xt_sctp.h
@@ -41,19 +41,19 @@ struct xt_sctp_info {
 #define SCTP_CHUNKMAP_SET(chunkmap, type) 		\
 	do { 						\
 		(chunkmap)[type / bytes(__u32)] |= 	\
-			1 << (type % bytes(__u32));	\
+			1u << (type % bytes(__u32));	\
 	} while (0)
 
 #define SCTP_CHUNKMAP_CLEAR(chunkmap, type)		 	\
 	do {							\
 		(chunkmap)[type / bytes(__u32)] &= 		\
-			~(1 << (type % bytes(__u32)));	\
+			~(1u << (type % bytes(__u32)));	\
 	} while (0)
 
 #define SCTP_CHUNKMAP_IS_SET(chunkmap, type) 			\
 ({								\
 	((chunkmap)[type / bytes (__u32)] & 		\
-		(1 << (type % bytes (__u32)))) ? 1: 0;	\
+		(1u << (type % bytes (__u32)))) ? 1: 0;	\
 })
 
 #define SCTP_CHUNKMAP_RESET(chunkmap) \
-- 
2.20.1

[PATCH 5.4 028/165] netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit db3b665dd77b34e34df00e17d7b299c98fcfb2c5 ]

The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.

	[ a, a+1) [ a+1, a+2)

This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.

The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.

The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.

This patch fixes the lookup and get operations.

Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes: ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 57123259452f..a9f804f7a04a 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -74,8 +74,13 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 				parent = rcu_dereference_raw(parent->rb_left);
 				continue;
 			}
-			if (nft_rbtree_interval_end(rbe))
-				goto out;
+			if (nft_rbtree_interval_end(rbe)) {
+				if (nft_set_is_anonymous(set))
+					return false;
+				parent = rcu_dereference_raw(parent->rb_left);
+				interval = NULL;
+				continue;
+			}
 
 			*ext = &rbe->ext;
 			return true;
@@ -88,7 +93,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 		*ext = &interval->ext;
 		return true;
 	}
-out:
+
 	return false;
 }
 
@@ -139,8 +144,10 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 			if (flags & NFT_SET_ELEM_INTERVAL_END)
 				interval = rbe;
 		} else {
-			if (!nft_set_elem_active(&rbe->ext, genmask))
+			if (!nft_set_elem_active(&rbe->ext, genmask)) {
 				parent = rcu_dereference_raw(parent->rb_left);
+				continue;
+			}
 
 			if (!nft_set_ext_exists(&rbe->ext, NFT_SET_EXT_FLAGS) ||
 			    (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END) ==
@@ -148,7 +155,11 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 				*elem = rbe;
 				return true;
 			}
-			return false;
+
+			if (nft_rbtree_interval_end(rbe))
+				interval = NULL;
+
+			parent = rcu_dereference_raw(parent->rb_left);
 		}
 	}
 
-- 
2.20.1

[PATCH 5.4 029/165] netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit bffc124b6fe37d0ae9b428d104efb426403bb5c9 ]

Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 712a428509ad..7120eba71ac5 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4489,14 +4489,20 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 		if (nla[NFTA_SET_ELEM_DATA] == NULL &&
 		    !(flags & NFT_SET_ELEM_INTERVAL_END))
 			return -EINVAL;
-		if (nla[NFTA_SET_ELEM_DATA] != NULL &&
-		    flags & NFT_SET_ELEM_INTERVAL_END)
-			return -EINVAL;
 	} else {
 		if (nla[NFTA_SET_ELEM_DATA] != NULL)
 			return -EINVAL;
 	}
 
+	if ((flags & NFT_SET_ELEM_INTERVAL_END) &&
+	     (nla[NFTA_SET_ELEM_DATA] ||
+	      nla[NFTA_SET_ELEM_OBJREF] ||
+	      nla[NFTA_SET_ELEM_TIMEOUT] ||
+	      nla[NFTA_SET_ELEM_EXPIRATION] ||
+	      nla[NFTA_SET_ELEM_USERDATA] ||
+	      nla[NFTA_SET_ELEM_EXPR]))
+		return -EINVAL;
+
 	timeout = 0;
 	if (nla[NFTA_SET_ELEM_TIMEOUT] != NULL) {
 		if (!(set->flags & NFT_SET_TIMEOUT))
-- 
2.20.1

[PATCH 5.4 030/165] netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0d2c96af797ba149e559c5875c0151384ab6dd14 ]

Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.

Fixes: 96518518cc41 ("netfilter: add nftables")
Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c |  4 +++-
 net/netfilter/nft_bitwise.c   |  4 ++--
 net/netfilter/nft_cmp.c       |  6 ++++++
 net/netfilter/nft_range.c     | 10 ++++++++++
 4 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 7120eba71ac5..4c03c14e46bc 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4252,8 +4252,10 @@ static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 		return err;
 
 	err = -EINVAL;
-	if (desc.type != NFT_DATA_VALUE || desc.len != set->klen)
+	if (desc.type != NFT_DATA_VALUE || desc.len != set->klen) {
+		nft_data_release(&elem.key.val, desc.type);
 		return err;
+	}
 
 	priv = set->ops->get(ctx->net, set, &elem, flags);
 	if (IS_ERR(priv))
diff --git a/net/netfilter/nft_bitwise.c b/net/netfilter/nft_bitwise.c
index 02afa752dd2e..10e9d50e4e19 100644
--- a/net/netfilter/nft_bitwise.c
+++ b/net/netfilter/nft_bitwise.c
@@ -80,7 +80,7 @@ static int nft_bitwise_init(const struct nft_ctx *ctx,
 			    tb[NFTA_BITWISE_MASK]);
 	if (err < 0)
 		return err;
-	if (d1.len != priv->len) {
+	if (d1.type != NFT_DATA_VALUE || d1.len != priv->len) {
 		err = -EINVAL;
 		goto err1;
 	}
@@ -89,7 +89,7 @@ static int nft_bitwise_init(const struct nft_ctx *ctx,
 			    tb[NFTA_BITWISE_XOR]);
 	if (err < 0)
 		goto err1;
-	if (d2.len != priv->len) {
+	if (d2.type != NFT_DATA_VALUE || d2.len != priv->len) {
 		err = -EINVAL;
 		goto err2;
 	}
diff --git a/net/netfilter/nft_cmp.c b/net/netfilter/nft_cmp.c
index 0744b2bb46da..ae730dba60c8 100644
--- a/net/netfilter/nft_cmp.c
+++ b/net/netfilter/nft_cmp.c
@@ -80,6 +80,12 @@ static int nft_cmp_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (err < 0)
 		return err;
 
+	if (desc.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		nft_data_release(&priv->data, desc.type);
+		return err;
+	}
+
 	priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]);
 	err = nft_validate_register_load(priv->sreg, desc.len);
 	if (err < 0)
diff --git a/net/netfilter/nft_range.c b/net/netfilter/nft_range.c
index 4701fa8a45e7..89efcc5a533d 100644
--- a/net/netfilter/nft_range.c
+++ b/net/netfilter/nft_range.c
@@ -66,11 +66,21 @@ static int nft_range_init(const struct nft_ctx *ctx, const struct nft_expr *expr
 	if (err < 0)
 		return err;
 
+	if (desc_from.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		goto err1;
+	}
+
 	err = nft_data_init(NULL, &priv->data_to, sizeof(priv->data_to),
 			    &desc_to, tb[NFTA_RANGE_TO_DATA]);
 	if (err < 0)
 		goto err1;
 
+	if (desc_to.type != NFT_DATA_VALUE) {
+		err = -EINVAL;
+		goto err2;
+	}
+
 	if (desc_from.len != desc_to.len) {
 		err = -EINVAL;
 		goto err2;
-- 
2.20.1

[PATCH 5.4 031/165] netfilter: nf_tables: skip module reference count bump on object updates

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit fd57d0cbe187e93f63777d36e9f49293311d417f ]

Use __nft_obj_type_get() instead, otherwise there is a module reference
counter leak.

Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 4c03c14e46bc..67ca47c7ce54 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -5217,7 +5217,7 @@ static int nf_tables_newobj(struct net *net, struct sock *nlsk,
 		if (nlh->nlmsg_flags & NLM_F_REPLACE)
 			return -EOPNOTSUPP;
 
-		type = nft_obj_type_get(net, objtype);
+		type = __nft_obj_type_get(objtype);
 		nft_ctx_init(&ctx, net, skb, nlh, family, table, NULL, nla);
 
 		return nf_tables_updobj(&ctx, type, nla[NFTA_OBJ_DATA], obj);
-- 
2.20.1

[PATCH 5.4 032/165] netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actions

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 81ec61074bcf68acfcb2820cda3ff9d9984419c7 ]

If the rule only specifies the matching side, return EOPNOTSUPP.
Otherwise, the front-end relies on the drivers to reject this rule.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_offload.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 6f7eab502e65..e743f811245f 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -44,6 +44,9 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net,
 		expr = nft_expr_next(expr);
 	}
 
+	if (num_actions == 0)
+		return ERR_PTR(-EOPNOTSUPP);
+
 	flow = nft_flow_rule_alloc(num_actions);
 	if (!flow)
 		return ERR_PTR(-ENOMEM);
-- 
2.20.1

[PATCH 5.4 033/165] ARM: dts: BCM5301X: Fix MDIO node address/size cells

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 093c3f94e922d83a734fc4da08cc5814990f32c6 ]

The MDIO node on BCM5301X had an reversed #address-cells and
 #size-cells properties, correct those, silencing checker warnings:

.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected

Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..2d9b4dd05830 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
-- 
2.20.1

[PATCH 5.4 034/165] selftests/ftrace: Fix to check the existence of set_ftrace_filter

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit fd1baf6ca2ea3550ea47f2bb0bdcf34ec764a779 ]

If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/ftrace/test.d/functions | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index 86986c4bba54..5d4550591ff9 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -46,6 +46,9 @@ reset_events_filter() { # reset all current setting filters
 }
 
 reset_ftrace_filter() { # reset all triggers in set_ftrace_filter
+    if [ ! -f set_ftrace_filter ]; then
+      return 0
+    fi
     echo > set_ftrace_filter
     grep -v '^#' set_ftrace_filter | while read t; do
 	tr=`echo $t | cut -d: -f2`
@@ -93,7 +96,7 @@ initialize_ftrace() { # Reset ftrace to initial-state
     disable_events
     [ -f set_event_pid ] && echo > set_event_pid
     [ -f set_ftrace_pid ] && echo > set_ftrace_pid
-    [ -f set_ftrace_filter ] && echo | tee set_ftrace_*
+    [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace
     [ -f set_graph_function ] && echo | tee set_graph_*
     [ -f stack_trace_filter ] && echo > stack_trace_filter
     [ -f kprobe_events ] && echo > kprobe_events
-- 
2.20.1

[PATCH 5.4 035/165] selftests/ftrace: Fix ftrace test cases to check unsupported

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 25deae098e748d8d36bc35129a66734b8f6925c9 ]

Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.

Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc | 2 ++
 tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
index 36fb59f886ea..1a52f2883fe0 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc
@@ -3,6 +3,8 @@
 # description: ftrace - stacktrace filter command
 # flags: instance
 
+[ ! -f set_ftrace_filter ] && exit_unsupported
+
 echo _do_fork:stacktrace >> set_ftrace_filter
 
 grep -q "_do_fork:stacktrace:unlimited" set_ftrace_filter
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
index 86a1f07ef2ca..71fa3f49e35e 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc
@@ -15,6 +15,11 @@ if [ $NP -eq 1 ] ;then
   exit_unresolved
 fi
 
+if ! grep -q "function" available_tracers ; then
+  echo "Function trace is not enabled"
+  exit_unsupported
+fi
+
 ORIG_CPUMASK=`cat tracing_cpumask`
 
 do_reset() {
-- 
2.20.1

[PATCH 5.4 036/165] selftests/ftrace: Do not to use absolute debugfs path

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit ba1b9c5048e43716921abe3a1db19cebebf4a5f5 ]

Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../test.d/trigger/inter-event/trigger-action-hist-xfail.tc   | 4 ++--
 .../trigger/inter-event/trigger-onchange-action-hist.tc       | 2 +-
 .../trigger/inter-event/trigger-snapshot-action-hist.tc       | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
index 1221240f8cf6..3f2aee115f6e 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-action-hist-xfail.tc
@@ -21,10 +21,10 @@ grep -q "snapshot()" README || exit_unsupported # version issue
 
 echo "Test expected snapshot action failure"
 
-echo 'hist:keys=comm:onmatch(sched.sched_wakeup).snapshot()' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger && exit_fail
+echo 'hist:keys=comm:onmatch(sched.sched_wakeup).snapshot()' >> events/sched/sched_waking/trigger && exit_fail
 
 echo "Test expected save action failure"
 
-echo 'hist:keys=comm:onmatch(sched.sched_wakeup).save(comm,prio)' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger && exit_fail
+echo 'hist:keys=comm:onmatch(sched.sched_wakeup).save(comm,prio)' >> events/sched/sched_waking/trigger && exit_fail
 
 exit_xfail
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
index 064a284e4e75..c80007aa9f86 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onchange-action-hist.tc
@@ -16,7 +16,7 @@ grep -q "onchange(var)" README || exit_unsupported # version issue
 
 echo "Test onchange action"
 
-echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio) if comm=="ping"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
+echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio) if comm=="ping"' >> events/sched/sched_waking/trigger
 
 ping $LOCALHOST -c 3
 nice -n 1 ping $LOCALHOST -c 3
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
index 18fff69fc433..f546c1b66a9b 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-snapshot-action-hist.tc
@@ -23,9 +23,9 @@ grep -q "snapshot()" README || exit_unsupported # version issue
 
 echo "Test snapshot action"
 
-echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+echo 1 > events/sched/enable
 
-echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio):onchange($newprio).snapshot() if comm=="ping"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
+echo 'hist:keys=comm:newprio=prio:onchange($newprio).save(comm,prio):onchange($newprio).snapshot() if comm=="ping"' >> events/sched/sched_waking/trigger
 
 ping $LOCALHOST -c 3
 nice -n 1 ping $LOCALHOST -c 3
-- 
2.20.1

[PATCH 5.4 037/165] selftests/ftrace: Fix multiple kprobe testcase

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5cc6c8d4a99d0ee4d5466498e258e593df1d3eb6 ]

Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
 - Since `wc -l FILE` returns not only line number but also
   FILE filename, following "if" statement always failed.
   Fix this bug by replacing it with 'cat FILE | wc -l'
 - Since "while do-done loop" block with pipeline becomes a
   subshell, $N local variable is not update outside of
   the loop.
   Fix this bug by using actual target number (256) instead
   of $N.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/ftrace/test.d/kprobe/multiple_kprobes.tc      | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index 5862eee91e1d..6e3dbe5f96b7 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -20,9 +20,9 @@ while read i; do
   test $N -eq 256 && break
 done
 
-L=`wc -l kprobe_events`
-if [ $L -ne $N ]; then
-  echo "The number of kprobes events ($L) is not $N"
+L=`cat kprobe_events | wc -l`
+if [ $L -ne 256 ]; then
+  echo "The number of kprobes events ($L) is not 256"
   exit_fail
 fi
 
-- 
2.20.1

[PATCH 5.4 038/165] selftests: safesetid: Move link library to LDLIBS

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit be12252212fa3dfed6e75112865095c484c0ce87 ]

Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.

Without this, safesetid failed to build with link error
as below.

----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/safesetid/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/safesetid/Makefile b/tools/testing/selftests/safesetid/Makefile
index 98da7a504737..cac42cd36a1b 100644
--- a/tools/testing/selftests/safesetid/Makefile
+++ b/tools/testing/selftests/safesetid/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for mount selftests.
-CFLAGS = -Wall -lcap -O2
+CFLAGS = -Wall -O2
+LDLIBS = -lcap
 
 TEST_PROGS := run_tests.sh
 TEST_GEN_FILES := safesetid-test
-- 
2.20.1

[PATCH 5.4 039/165] selftests: safesetid: Check the return value of setuid/setgid

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 295c4e21cf27ac9af542140e3e797df9e0cf7b5f ]

Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.

safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
   setuid(child_uid);
   ^~~~~~~~~~~~~~~~~

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/safesetid/safesetid-test.c  | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/safesetid/safesetid-test.c b/tools/testing/selftests/safesetid/safesetid-test.c
index 8f40c6ecdad1..0c4d50644c13 100644
--- a/tools/testing/selftests/safesetid/safesetid-test.c
+++ b/tools/testing/selftests/safesetid/safesetid-test.c
@@ -213,7 +213,8 @@ static void test_setuid(uid_t child_uid, bool expect_success)
 	}
 
 	if (cpid == 0) {	    /* Code executed by child */
-		setuid(child_uid);
+		if (setuid(child_uid) < 0)
+			exit(EXIT_FAILURE);
 		if (getuid() == child_uid)
 			exit(EXIT_SUCCESS);
 		else
@@ -291,8 +292,10 @@ int main(int argc, char **argv)
 
 	// First test to make sure we can write userns mappings from a user
 	// that doesn't have any restrictions (as long as it has CAP_SETUID);
-	setuid(NO_POLICY_USER);
-	setgid(NO_POLICY_USER);
+	if (setuid(NO_POLICY_USER) < 0)
+		die("Error with set uid(%d)\n", NO_POLICY_USER);
+	if (setgid(NO_POLICY_USER) < 0)
+		die("Error with set gid(%d)\n", NO_POLICY_USER);
 
 	// Take away all but setid caps
 	drop_caps(true);
@@ -306,8 +309,10 @@ int main(int argc, char **argv)
 		die("test_userns failed when it should work\n");
 	}
 
-	setuid(RESTRICTED_PARENT);
-	setgid(RESTRICTED_PARENT);
+	if (setuid(RESTRICTED_PARENT) < 0)
+		die("Error with set uid(%d)\n", RESTRICTED_PARENT);
+	if (setgid(RESTRICTED_PARENT) < 0)
+		die("Error with set gid(%d)\n", RESTRICTED_PARENT);
 
 	test_setuid(ROOT_USER, false);
 	test_setuid(ALLOWED_CHILD1, true);
-- 
2.20.1

[PATCH 5.4 040/165] selftests: safesetid: Fix Makefile to set correct test program

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 8ef1ec0ca32c6f8a87f5b4c24b1db26da67c5609 ]

Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.

Without this fix, I got following error.
  ----
  TAP version 13
  1..1
  # selftests: safesetid: run_tests.sh
  # Warning: file run_tests.sh is missing!
  not ok 1 selftests: safesetid: run_tests.sh
  ----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/safesetid/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/safesetid/Makefile b/tools/testing/selftests/safesetid/Makefile
index cac42cd36a1b..fa02c4d5ec13 100644
--- a/tools/testing/selftests/safesetid/Makefile
+++ b/tools/testing/selftests/safesetid/Makefile
@@ -3,7 +3,7 @@
 CFLAGS = -Wall -O2
 LDLIBS = -lcap
 
-TEST_PROGS := run_tests.sh
+TEST_PROGS := safesetid-test.sh
 TEST_GEN_FILES := safesetid-test
 
 include ../lib.mk
-- 
2.20.1

[PATCH 5.4 041/165] ARM: exynos_defconfig: Restore debugfs support

[Greg Kroah-Hartman]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit a2315d3aea5976acd919d3d3fcf82f752562c25b ]

Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.

In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.

Enable it again explicitly, as debugfs support is essential for various
automated testing tools.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 08db1c83eb2d..736ed7a7bcf8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -348,6 +348,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
-- 
2.20.1

[PATCH 5.4 042/165] ARM: dts: Cygnus: Fix MDIO node address/size cells

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit fac2c2da3596d77c343988bb0d41a8c533b2e73c ]

The MDIO node on Cygnus had an reversed #address-cells and
 #size-cells properties, correct those.

Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..1bc45cfd5453 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
-- 
2.20.1

[PATCH 5.4 043/165] spi: spi-cavium-thunderx: Add missing pci_release_regions()

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit a841e2853e1afecc2ee692b8cc5bff606bc84e4c ]

The driver forgets to call pci_release_regions() in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cavium-thunderx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
index d12e149f1a41..fd6b9caffaf0 100644
--- a/drivers/spi/spi-cavium-thunderx.c
+++ b/drivers/spi/spi-cavium-thunderx.c
@@ -82,6 +82,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev,
 
 error:
 	clk_disable_unprepare(p->clk);
+	pci_release_regions(pdev);
 	spi_master_put(master);
 	return ret;
 }
@@ -96,6 +97,7 @@ static void thunderx_spi_remove(struct pci_dev *pdev)
 		return;
 
 	clk_disable_unprepare(p->clk);
+	pci_release_regions(pdev);
 	/* Put everything in a known state. */
 	writeq(0, p->register_base + OCTEON_SPI_CFG(p));
 }
-- 
2.20.1

[PATCH 5.4 044/165] reset: Do not register resource data for missing resets

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit db23808615e29d9a04f96806cac56f78b0fee0ef ]

When an optional reset is not present, __devm_reset_control_get() and
devm_reset_control_array_get() still register resource data to release
the non-existing reset on cleanup, which is futile.

Fix this by skipping NULL reset control pointers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 3c9a64c1b7a8..f343bd814d32 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -787,7 +787,7 @@ struct reset_control *__devm_reset_control_get(struct device *dev,
 		return ERR_PTR(-ENOMEM);
 
 	rstc = __reset_control_get(dev, id, index, shared, optional, acquired);
-	if (!IS_ERR(rstc)) {
+	if (!IS_ERR_OR_NULL(rstc)) {
 		*ptr = rstc;
 		devres_add(dev, ptr);
 	} else {
@@ -930,7 +930,7 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
 		return ERR_PTR(-ENOMEM);
 
 	rstc = of_reset_control_array_get(dev->of_node, shared, optional, true);
-	if (IS_ERR(rstc)) {
+	if (IS_ERR_OR_NULL(rstc)) {
 		devres_free(devres);
 		return rstc;
 	}
-- 
2.20.1

[PATCH 5.4 045/165] ASoC: topology: Check return value for snd_soc_add_dai_link()

[Greg Kroah-Hartman]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit 76d2703649321c296df7ec0dafd50add96215de4 ]

snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.

Fix that by checking the return status and free the memory in case
of an error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 0fd032914a31..c92e360d27b8 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1918,11 +1918,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_link_load(tplg, link, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: FE link loading failed\n");
-		kfree(link->name);
-		kfree(link->stream_name);
-		kfree(link->cpus->dai_name);
-		kfree(link);
-		return ret;
+		goto err;
+	}
+
+	ret = snd_soc_add_dai_link(tplg->comp->card, link);
+	if (ret < 0) {
+		dev_err(tplg->comp->dev, "ASoC: adding FE link failed\n");
+		goto err;
 	}
 
 	link->dobj.index = tplg->index;
@@ -1930,8 +1932,13 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	link->dobj.type = SND_SOC_DOBJ_DAI_LINK;
 	list_add(&link->dobj.list, &tplg->comp->dobj_list);
 
-	snd_soc_add_dai_link(tplg->comp->card, link);
 	return 0;
+err:
+	kfree(link->name);
+	kfree(link->stream_name);
+	kfree(link->cpus->dai_name);
+	kfree(link);
+	return ret;
 }
 
 /* create a FE DAI and DAI link from the PCM object */
-- 
2.20.1

[PATCH 5.4 046/165] ASoC: topology: Check return value for soc_tplg_pcm_create()

[Greg Kroah-Hartman]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c92e360d27b8..fd2d22ddc81b 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2031,6 +2031,7 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 	int size;
 	int i;
 	bool abi_match;
+	int ret;
 
 	count = le32_to_cpu(hdr->count);
 
@@ -2072,7 +2073,12 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 		}
 
 		/* create the FE DAIs and DAI links */
-		soc_tplg_pcm_create(tplg, _pcm);
+		ret = soc_tplg_pcm_create(tplg, _pcm);
+		if (ret < 0) {
+			if (!abi_match)
+				kfree(_pcm);
+			return ret;
+		}
 
 		/* offset by version-specific struct size and
 		 * real priv data size
-- 
2.20.1

[PATCH 5.4 047/165] ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

[Greg Kroah-Hartman]

From: Karol Trzcinski <karolx.trzcinski@linux.intel.com>

[ Upstream commit 8edc95667646a75f0fc97e08ecb180581fdff300 ]

Added warning log when found some unknown FW boot ext header,
to improve debuggability.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/loader.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
index 9a9a381a908d..a041adf0669d 100644
--- a/sound/soc/sof/loader.c
+++ b/sound/soc/sof/loader.c
@@ -66,6 +66,8 @@ int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset)
 			ret = get_ext_windows(sdev, ext_hdr);
 			break;
 		default:
+			dev_warn(sdev->dev, "warning: unknown ext header type %d size 0x%x\n",
+				 ext_hdr->type, ext_hdr->hdr.size);
 			break;
 		}
 
-- 
2.20.1

[PATCH 5.4 048/165] ASoC: SOF: Intel: split cht and byt debug window sizes

[Greg Kroah-Hartman]

From: Curtis Malainey <cujomalainey@chromium.org>

[ Upstream commit f84337c3fb8ff4d533ccbed0d2db4e8587d0ff58 ]

Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/byt.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sof/intel/byt.c b/sound/soc/sof/intel/byt.c
index a1e514f71739..41008c974ac6 100644
--- a/sound/soc/sof/intel/byt.c
+++ b/sound/soc/sof/intel/byt.c
@@ -24,7 +24,8 @@
 #define DRAM_OFFSET		0x100000
 #define DRAM_SIZE		(160 * 1024)
 #define SHIM_OFFSET		0x140000
-#define SHIM_SIZE		0x100
+#define SHIM_SIZE_BYT		0x100
+#define SHIM_SIZE_CHT		0x118
 #define MBOX_OFFSET		0x144000
 #define MBOX_SIZE		0x1000
 #define EXCEPT_OFFSET		0x800
@@ -75,7 +76,7 @@ static const struct snd_sof_debugfs_map byt_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_BYT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
@@ -102,7 +103,7 @@ static const struct snd_sof_debugfs_map cht_debugfs[] = {
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
 	{"dram", BYT_DSP_BAR, DRAM_OFFSET, DRAM_SIZE,
 	 SOF_DEBUGFS_ACCESS_D0_ONLY},
-	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE,
+	{"shim", BYT_DSP_BAR, SHIM_OFFSET, SHIM_SIZE_CHT,
 	 SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
-- 
2.20.1

[PATCH 5.4 049/165] ARM: dts: am335x-sancloud-bbe: fix phy mode

[Greg Kroah-Hartman]

From: Mans Rullgard <mans@mansr.com>

[ Upstream commit c842b8c4ff9859f750447f3ca08f64b2ed23cebc ]

The phy mode should be rgmii-id.  For some reason, it used to work with
rgmii-txid but doesn't any more.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-sancloud-bbe.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e35493..e5fdb7abb0d5 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
-- 
2.20.1

[PATCH 5.4 050/165] ARM: omap2plus_defconfig: Add back DEBUG_FS

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit e00b59d30506dc9ef91caf2f3c584209cc9f61e4 ]

Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 40d7f1a4fc45..4ec69fb8a698 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -552,5 +552,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1

[PATCH 5.4 051/165] ARM: dts: bcm283x: Fix critical trip point

[Greg Kroah-Hartman]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 30e647a764d446723a7e0fb08d209e0104f16173 ]

During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher

So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).

Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.

Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fcbc2cc..90125ce19a1b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -40,7 +40,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <80000>;
+					temperature	= <90000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
-- 
2.20.1

[PATCH 5.4 052/165] arm64: dts: ls1028a: fix typo in TMU calibration data

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 961f8209c8d5ef5d33da42e6656d7c8179899da0 ]

The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.

This was tested on a custom board.

Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..c7dae9ec17da 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -567,7 +567,7 @@
 					       0x00010004 0x0000003d
 					       0x00010005 0x00000045
 					       0x00010006 0x0000004d
-					       0x00010007 0x00000045
+					       0x00010007 0x00000055
 					       0x00010008 0x0000005e
 					       0x00010009 0x00000066
 					       0x0001000a 0x0000006e
-- 
2.20.1

[PATCH 5.4 053/165] bpf, riscv: Limit to 33 tail calls

[Greg Kroah-Hartman]

From: Paul Chaignon <paul.chaignon@orange.com>

[ Upstream commit 96bc4432f5ade1045521f3b247f516b1478166bd ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/net/bpf_jit_comp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/net/bpf_jit_comp.c b/arch/riscv/net/bpf_jit_comp.c
index 5451ef3845f2..7fbf56aab661 100644
--- a/arch/riscv/net/bpf_jit_comp.c
+++ b/arch/riscv/net/bpf_jit_comp.c
@@ -631,14 +631,14 @@ static int emit_bpf_tail_call(int insn, struct rv_jit_context *ctx)
 		return -1;
 	emit(rv_bgeu(RV_REG_A2, RV_REG_T1, off >> 1), ctx);
 
-	/* if (--TCC < 0)
+	/* if (TCC-- < 0)
 	 *     goto out;
 	 */
 	emit(rv_addi(RV_REG_T1, tcc, -1), ctx);
 	off = (tc_ninsn - (ctx->ninsns - start_insn)) << 2;
 	if (is_13b_check(off, insn))
 		return -1;
-	emit(rv_blt(RV_REG_T1, RV_REG_ZERO, off >> 1), ctx);
+	emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
 
 	/* prog = array->ptrs[index];
 	 * if (!prog)
-- 
2.20.1

[PATCH 5.4 054/165] bpf, mips: Limit to 33 tail calls

[Greg Kroah-Hartman]

From: Paul Chaignon <paul.chaignon@orange.com>

[ Upstream commit e49e6f6db04e915dccb494ae10fa14888fea6f89 ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.

Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/net/ebpf_jit.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/mips/net/ebpf_jit.c b/arch/mips/net/ebpf_jit.c
index a2405d5f7d1e..561154cbcc40 100644
--- a/arch/mips/net/ebpf_jit.c
+++ b/arch/mips/net/ebpf_jit.c
@@ -604,6 +604,7 @@ static void emit_const_to_reg(struct jit_ctx *ctx, int dst, u64 value)
 static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 {
 	int off, b_off;
+	int tcc_reg;
 
 	ctx->flags |= EBPF_SEEN_TC;
 	/*
@@ -616,14 +617,14 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
 	b_off = b_imm(this_idx + 1, ctx);
 	emit_instr(ctx, bne, MIPS_R_AT, MIPS_R_ZERO, b_off);
 	/*
-	 * if (--TCC < 0)
+	 * if (TCC-- < 0)
 	 *     goto out;
 	 */
 	/* Delay slot */
-	emit_instr(ctx, daddiu, MIPS_R_T5,
-		   (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4, -1);
+	tcc_reg = (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4;
+	emit_instr(ctx, daddiu, MIPS_R_T5, tcc_reg, -1);
 	b_off = b_imm(this_idx + 1, ctx);
-	emit_instr(ctx, bltz, MIPS_R_T5, b_off);
+	emit_instr(ctx, bltz, tcc_reg, b_off);
 	/*
 	 * prog = array->ptrs[index];
 	 * if (prog == NULL)
-- 
2.20.1

[PATCH 5.4 055/165] bpftool: Dont crash on missing jited insns or ksyms

[Greg Kroah-Hartman]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 5b79bcdf03628a3a9ee04d9cd5fabcf61a8e20be ]

When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.

Fix this by adding the missing checks.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/prog.c          | 2 +-
 tools/bpf/bpftool/xlated_dumper.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 43fdbbfe41bb..ea0bcd58bcb9 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -493,7 +493,7 @@ static int do_dump(int argc, char **argv)
 
 	info = &info_linear->info;
 	if (mode == DUMP_JITED) {
-		if (info->jited_prog_len == 0) {
+		if (info->jited_prog_len == 0 || !info->jited_prog_insns) {
 			p_info("no instructions returned");
 			goto err_free;
 		}
diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c
index 494d7ae3614d..5b91ee65a080 100644
--- a/tools/bpf/bpftool/xlated_dumper.c
+++ b/tools/bpf/bpftool/xlated_dumper.c
@@ -174,7 +174,7 @@ static const char *print_call(void *private_data,
 	struct kernel_sym *sym;
 
 	if (insn->src_reg == BPF_PSEUDO_CALL &&
-	    (__u32) insn->imm < dd->nr_jited_ksyms)
+	    (__u32) insn->imm < dd->nr_jited_ksyms && dd->jited_ksyms)
 		address = dd->jited_ksyms[insn->imm];
 
 	sym = kernel_syms_search(dd, address);
-- 
2.20.1

[PATCH 5.4 056/165] perf metricgroup: Fix printing event names of metric group with multiple events

[Greg Kroah-Hartman]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit eb573e746b9d4f0921dcb2449be3df41dae3caea ]

Commit f01642e4912b ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly

In power9 platform:

command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
     1.000208486
     2.000368863
     2.001400558

Similarly in skylake platform:

command:./perf stat --metric-only -M Power -I 1000
     1.000579994
     2.002189493

With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist.  Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.

Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.

Example for single metric event in power9 platform:

command:# ./perf stat --metric-only  -M branches_per_inst -I 1000 sleep 1
     1.000094653                  0.2
     1.001337059                  0.0

This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.

With this patch:
In power9 platform:

command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
            time  derat_4k_miss_rate_percent  derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent  derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
     1.000135672                         0.0                  0.3              1.0                         0.0                   0.2                    0.0                    0.0
     2.000380617                         0.0                  0.0              0.0                         0.0                   0.0                    0.0                    0.0

command:# ./perf stat --metric-only -M Power -I 1000

Similarly in skylake platform:
result:#
            time    Turbo_Utilization    C3_Core_Residency  C6_Core_Residency  C7_Core_Residency    C2_Pkg_Residency  C3_Pkg_Residency     C6_Pkg_Residency   C7_Pkg_Residency
     1.000563580                  0.3                  0.0                2.6               44.2                21.9               0.0                  0.0               0.0
     2.002235027                  0.4                  0.0                2.7               43.0                20.7               0.0                  0.0               0.0

Committer testing:

  Before:

  [root@seventh ~]# perf stat --metric-only -M Power -I 1000
  #           time
       1.000383223
       2.001168182
       3.001968545
       4.002741200
       5.003442022
  ^C     5.777687244

  [root@seventh ~]#

  After the patch:

  [root@seventh ~]# perf stat --metric-only -M Power -I 1000
  #           time    Turbo_Utilization    C3_Core_Residency    C6_Core_Residency    C7_Core_Residency     C2_Pkg_Residency     C3_Pkg_Residency     C6_Pkg_Residency     C7_Pkg_Residency
       1.000406577                  0.4                  0.1                  1.4                 97.0                  0.0                  0.0                  0.0                  0.0
       2.001481572                  0.3                  0.0                  0.6                 97.9                  0.0                  0.0                  0.0                  0.0
       3.002332585                  0.2                  0.0                  1.0                 97.5                  0.0                  0.0                  0.0                  0.0
       4.003196624                  0.2                  0.0                  0.3                 98.6                  0.0                  0.0                  0.0                  0.0
       5.004063851                  0.3                  0.0                  0.7                 97.7                  0.0                  0.0                  0.0                  0.0
  ^C     5.471260276                  0.2                  0.0                  0.5                 49.3                  0.0                  0.0                  0.0                  0.0

  [root@seventh ~]#
  [root@seventh ~]# dmesg | grep -i skylake
  [    0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
  [root@seventh ~]#

Fixes: f01642e4912b ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/metricgroup.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index a7c0424dbda3..940a6e7a6854 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -103,8 +103,11 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 		if (!strcmp(ev->name, ids[i])) {
 			if (!metric_events[i])
 				metric_events[i] = ev;
+			i++;
+			if (i == idnum)
+				break;
 		} else {
-			if (++i == idnum) {
+			if (i + 1 == idnum) {
 				/* Discard the whole match and start again */
 				i = 0;
 				memset(metric_events, 0,
@@ -124,7 +127,7 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 		}
 	}
 
-	if (i != idnum - 1) {
+	if (i != idnum) {
 		/* Not whole match */
 		return NULL;
 	}
-- 
2.20.1

[PATCH 5.4 057/165] perf header: Fix false warning when there are no duplicate cache entries

[Greg Kroah-Hartman]

From: Michael Petlan <mpetlan@redhat.com>

[ Upstream commit 28707826877f84bce0977845ea529cbdd08e4e8d ]

Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.

However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:

	cpu  level  shared_cpu_list  size
	  0     1         0           32K
	  0     1         0           64K
	  0     2         0           512K
	  0     3         0           8192K
	  1     1         1           32K
	  1     1         1           64K
	  1     2         1           512K
	  1     3         1           8192K

This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".

v2: Removing unused argument.

v3: Unifying the way we obtain number of cpus.

v4: Removed '& UINT_MAX' construct which is redundant.

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index becc2d109423..d3412f2c0d18 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1089,21 +1089,18 @@ static void cpu_cache_level__fprintf(FILE *out, struct cpu_cache_level *c)
 	fprintf(out, "L%d %-15s %8s [%s]\n", c->level, c->type, c->size, c->map);
 }
 
-static int build_caches(struct cpu_cache_level caches[], u32 size, u32 *cntp)
+#define MAX_CACHE_LVL 4
+
+static int build_caches(struct cpu_cache_level caches[], u32 *cntp)
 {
 	u32 i, cnt = 0;
-	long ncpus;
 	u32 nr, cpu;
 	u16 level;
 
-	ncpus = sysconf(_SC_NPROCESSORS_CONF);
-	if (ncpus < 0)
-		return -1;
-
-	nr = (u32)(ncpus & UINT_MAX);
+	nr = cpu__max_cpu();
 
 	for (cpu = 0; cpu < nr; cpu++) {
-		for (level = 0; level < 10; level++) {
+		for (level = 0; level < MAX_CACHE_LVL; level++) {
 			struct cpu_cache_level c;
 			int err;
 
@@ -1123,18 +1120,12 @@ static int build_caches(struct cpu_cache_level caches[], u32 size, u32 *cntp)
 				caches[cnt++] = c;
 			else
 				cpu_cache_level__free(&c);
-
-			if (WARN_ONCE(cnt == size, "way too many cpu caches.."))
-				goto out;
 		}
 	}
- out:
 	*cntp = cnt;
 	return 0;
 }
 
-#define MAX_CACHE_LVL 4
-
 static int write_cache(struct feat_fd *ff,
 		       struct evlist *evlist __maybe_unused)
 {
@@ -1143,7 +1134,7 @@ static int write_cache(struct feat_fd *ff,
 	u32 cnt = 0, i, version = 1;
 	int ret;
 
-	ret = build_caches(caches, max_caches, &cnt);
+	ret = build_caches(caches, &cnt);
 	if (ret)
 		goto out;
 
-- 
2.20.1

[PATCH 5.4 058/165] spi: spi-ti-qspi: Fix a bug when accessing non default CS

[Greg Kroah-Hartman]

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit c52c91bb9aa6bd8c38dbf9776158e33038aedd43 ]

When switching ChipSelect from default CS0 to any other CS, driver fails
to update the bits in system control module register that control which
CS is mapped for MMIO access. This causes reads to fail when driver
tries to access QSPI flash on CS1/2/3.

Fix this by updating appropriate bits whenever active CS changes.

Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-ti-qspi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 3cb65371ae3b..66dcb6128539 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -62,6 +62,7 @@ struct ti_qspi {
 	u32 dc;
 
 	bool mmap_enabled;
+	int current_cs;
 };
 
 #define QSPI_PID			(0x0)
@@ -487,6 +488,7 @@ static void ti_qspi_enable_memory_map(struct spi_device *spi)
 				   MEM_CS_EN(spi->chip_select));
 	}
 	qspi->mmap_enabled = true;
+	qspi->current_cs = spi->chip_select;
 }
 
 static void ti_qspi_disable_memory_map(struct spi_device *spi)
@@ -498,6 +500,7 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi)
 		regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
 				   MEM_CS_MASK, 0);
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 }
 
 static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
@@ -543,7 +546,7 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 
 	mutex_lock(&qspi->list_lock);
 
-	if (!qspi->mmap_enabled)
+	if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
 		ti_qspi_enable_memory_map(mem->spi);
 	ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
 				op->addr.nbytes, op->dummy.nbytes);
@@ -799,6 +802,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		}
 	}
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (!ret)
-- 
2.20.1

[PATCH 5.4 059/165] ARM: dts: am437x-gp/epos-evm: fix panel compatible

[Greg Kroah-Hartman]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit c6b16761c6908d3dc167a0a566578b4b0b972905 ]

The LCD panel on AM4 GP EVMs and ePOS boards seems to be
osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly
the panel has changed since the early EVMs, or there has been a mistake
with the panel type.

Update the DT files accordingly.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 2 +-
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500194fe..811c8cae315b 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..078cb473fa7d 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
 	};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
-- 
2.20.1

[PATCH 5.4 060/165] kselftest/runner: Print new line in print of timeout log

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

[ Upstream commit d187801d1a46519d2a322f879f7c8f85c685372e ]

If a timeout failure occurs, kselftest kills the test process and prints
the timeout log.  If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:

    # test_process_log	not ok 3 selftests: timers: nsleep-lat # TIMEOUT

This commit avoids such problem by printing one more line before the
TIMEOUT failure log.

Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest/runner.sh | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh
index 84de7bc74f2c..a8d20cbb711c 100644
--- a/tools/testing/selftests/kselftest/runner.sh
+++ b/tools/testing/selftests/kselftest/runner.sh
@@ -79,6 +79,7 @@ run_one()
 		if [ $rc -eq $skip_rc ]; then	\
 			echo "not ok $test_num $TEST_HDR_MSG # SKIP"
 		elif [ $rc -eq $timeout_rc ]; then \
+			echo "#"
 			echo "not ok $test_num $TEST_HDR_MSG # TIMEOUT"
 		else
 			echo "not ok $test_num $TEST_HDR_MSG # exit=$rc"
-- 
2.20.1

[PATCH 5.4 061/165] kselftest: Support old perl versions

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

[ Upstream commit 4eac734486fd431e0756cc5e929f140911a36a53 ]

On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:

    Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.

This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.

Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest/prefix.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/kselftest/prefix.pl b/tools/testing/selftests/kselftest/prefix.pl
index ec7e48118183..31f7c2a0a8bd 100755
--- a/tools/testing/selftests/kselftest/prefix.pl
+++ b/tools/testing/selftests/kselftest/prefix.pl
@@ -3,6 +3,7 @@
 # Prefix all lines with "# ", unbuffered. Command being piped in may need
 # to have unbuffering forced with "stdbuf -i0 -o0 -e0 $cmd".
 use strict;
+use IO::Handle;
 
 binmode STDIN;
 binmode STDOUT;
-- 
2.20.1

[PATCH 5.4 062/165] samples: bpf: Replace symbol compare of trace_event

[Greg Kroah-Hartman]

From: Daniel T. Lee <danieltimlee@gmail.com>

[ Upstream commit bba1b2a890253528c45aa66cf856f289a215bfbc ]

Previously, when this sample is added, commit 1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.

This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.

Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/trace_event_user.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c
index 16a16eadd509..749a50f2f9f3 100644
--- a/samples/bpf/trace_event_user.c
+++ b/samples/bpf/trace_event_user.c
@@ -37,9 +37,9 @@ static void print_ksym(__u64 addr)
 	}
 
 	printf("%s;", sym->name);
-	if (!strcmp(sym->name, "sys_read"))
+	if (!strstr(sym->name, "sys_read"))
 		sys_read_seen = true;
-	else if (!strcmp(sym->name, "sys_write"))
+	else if (!strstr(sym->name, "sys_write"))
 		sys_write_seen = true;
 }
 
-- 
2.20.1

[PATCH 5.4 063/165] samples: bpf: fix syscall_tp due to unused syscall

[Greg Kroah-Hartman]

From: Daniel T. Lee <danieltimlee@gmail.com>

[ Upstream commit fe3300897cbfd76c6cb825776e5ac0ca50a91ca4 ]

Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.

This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.

Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/syscall_tp_kern.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/syscall_tp_kern.c b/samples/bpf/syscall_tp_kern.c
index 1d78819ffef1..630ce8c4d5a2 100644
--- a/samples/bpf/syscall_tp_kern.c
+++ b/samples/bpf/syscall_tp_kern.c
@@ -47,13 +47,27 @@ static __always_inline void count(void *map)
 SEC("tracepoint/syscalls/sys_enter_open")
 int trace_enter_open(struct syscalls_enter_open_args *ctx)
 {
-	count((void *)&enter_open_map);
+	count(&enter_open_map);
+	return 0;
+}
+
+SEC("tracepoint/syscalls/sys_enter_openat")
+int trace_enter_open_at(struct syscalls_enter_open_args *ctx)
+{
+	count(&enter_open_map);
 	return 0;
 }
 
 SEC("tracepoint/syscalls/sys_exit_open")
 int trace_enter_exit(struct syscalls_exit_open_args *ctx)
 {
-	count((void *)&exit_open_map);
+	count(&exit_open_map);
+	return 0;
+}
+
+SEC("tracepoint/syscalls/sys_exit_openat")
+int trace_enter_exit_at(struct syscalls_exit_open_args *ctx)
+{
+	count(&exit_open_map);
 	return 0;
 }
-- 
2.20.1

[PATCH 5.4 064/165] arm64: dts: ls1028a: fix reboot node

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 3f0fb37b22b460e3dec62bee284932881574acb9 ]

The reboot register isn't located inside the DCFG controller, but in its
own RST controller. Fix it.

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index c7dae9ec17da..bb960fe2bb64 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -102,7 +102,7 @@
 
 	reboot {
 		compatible ="syscon-reboot";
-		regmap = <&dcfg>;
+		regmap = <&rst>;
 		offset = <0xb0>;
 		mask = <0x02>;
 	};
@@ -161,6 +161,12 @@
 			big-endian;
 		};
 
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
+		};
+
 		scfg: syscon@1fc0000 {
 			compatible = "fsl,ls1028a-scfg", "syscon";
 			reg = <0x0 0x1fc0000 0x0 0x10000>;
-- 
2.20.1

[PATCH 5.4 065/165] ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS

[Greg Kroah-Hartman]

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit 46db63abb79524209c15c683feccfba116746757 ]

This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.

Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")

Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options")

A very similar fix was required before:
commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0f7381ee0c37..dabb80453249 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -460,6 +460,7 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-- 
2.20.1

[PATCH 5.4 066/165] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration

[Greg Kroah-Hartman]

From: Andrew Jeffery <andrew@aj.id.au>

[ Upstream commit eb45f2110b036e4e35d3f3aaee1c2ccf49d92425 ]

Early revisions of the AST2600 datasheet are conflicted about the state
of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
determined that the reference pinmux configuration tables were in error
and the SCU documentation contained the correct configuration. Update
the driver to reflect the state described in the SCU documentation.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 24 ++++++++--------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index c6800d220920..bb07024d22ed 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -1088,60 +1088,52 @@ SSSF_PIN_DECL(AF15, GPIOV7, LPCSMI, SIG_DESC_SET(SCU434, 15));
 
 #define AB7 176
 SIG_EXPR_LIST_DECL_SESG(AB7, LAD0, LPC, SIG_DESC_SET(SCU434, 16),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16));
 PIN_DECL_2(AB7, GPIOW0, LAD0, ESPID0);
 
 #define AB8 177
 SIG_EXPR_LIST_DECL_SESG(AB8, LAD1, LPC, SIG_DESC_SET(SCU434, 17),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17));
 PIN_DECL_2(AB8, GPIOW1, LAD1, ESPID1);
 
 #define AC8 178
 SIG_EXPR_LIST_DECL_SESG(AC8, LAD2, LPC, SIG_DESC_SET(SCU434, 18),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18));
 PIN_DECL_2(AC8, GPIOW2, LAD2, ESPID2);
 
 #define AC7 179
 SIG_EXPR_LIST_DECL_SESG(AC7, LAD3, LPC, SIG_DESC_SET(SCU434, 19),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19));
 PIN_DECL_2(AC7, GPIOW3, LAD3, ESPID3);
 
 #define AE7 180
 SIG_EXPR_LIST_DECL_SESG(AE7, LCLK, LPC, SIG_DESC_SET(SCU434, 20),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20));
 PIN_DECL_2(AE7, GPIOW4, LCLK, ESPICK);
 
 #define AF7 181
 SIG_EXPR_LIST_DECL_SESG(AF7, LFRAME, LPC, SIG_DESC_SET(SCU434, 21),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21));
 PIN_DECL_2(AF7, GPIOW5, LFRAME, ESPICS);
 
 #define AD7 182
 SIG_EXPR_LIST_DECL_SESG(AD7, LSIRQ, LSIRQ, SIG_DESC_SET(SCU434, 22),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22));
 PIN_DECL_2(AD7, GPIOW6, LSIRQ, ESPIALT);
 FUNC_GROUP_DECL(LSIRQ, AD7);
 FUNC_GROUP_DECL(ESPIALT, AD7);
 
 #define AD8 183
 SIG_EXPR_LIST_DECL_SESG(AD8, LPCRST, LPC, SIG_DESC_SET(SCU434, 23),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23));
 PIN_DECL_2(AD8, GPIOW7, LPCRST, ESPIRST);
 
 FUNC_GROUP_DECL(LPC, AB7, AB8, AC8, AC7, AE7, AF7, AD8);
-- 
2.20.1

[PATCH 5.4 067/165] bus: ti-sysc: Fix missing reset delay handling

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit e709ed70d122e94cb426b1e1f905829eae19a009 ]

We have dts property for "ti,sysc-delay-us", and we're using it, but the
wait after OCP softreset only happens if devices are probed in legacy mode.

Let's add a delay after writing the OCP softreset when specified.

Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits")
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 2b6670daf7fc..34bd9bf4e68a 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1594,6 +1594,10 @@ static int sysc_reset(struct sysc *ddata)
 	sysc_val |= sysc_mask;
 	sysc_write(ddata, sysc_offset, sysc_val);
 
+	if (ddata->cfg.srst_udelay)
+		usleep_range(ddata->cfg.srst_udelay,
+			     ddata->cfg.srst_udelay * 2);
+
 	if (ddata->clk_enable_quirk)
 		ddata->clk_enable_quirk(ddata);
 
-- 
2.20.1

[PATCH 5.4 068/165] clk: walk orphan list on clock provider registration

[Greg Kroah-Hartman]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 66d9506440bb05289eb4867059e7b8c6ed209717 ]

So far, we walked the orphan list every time a new clock was registered
in CCF. This was fine since the clocks were only referenced by name.

Now that the clock can be referenced through DT, it is not enough:
* Controller A register first a reference clocks from controller B
  through DT.
* Controller B register all its clocks then register the provider.

Each time controller B registers a new clock, the orphan list is walked
but it can't match since the provider is registered yet. When the
provider is finally registered, the orphan list is not walked unless
another clock is registered afterward.

This can lead to situation where some clocks remain orphaned even if
the parent is available.

Walking the orphan list on provider registration solves the problem.

Reported-by: Jian Hu <jian.hu@amlogic.com>
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 62 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1c677d7f7f53..9c570bfc40d6 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3231,6 +3231,41 @@ static inline void clk_debug_unregister(struct clk_core *core)
 }
 #endif
 
+static void clk_core_reparent_orphans_nolock(void)
+{
+	struct clk_core *orphan;
+	struct hlist_node *tmp2;
+
+	/*
+	 * walk the list of orphan clocks and reparent any that newly finds a
+	 * parent.
+	 */
+	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
+		struct clk_core *parent = __clk_init_parent(orphan);
+
+		/*
+		 * We need to use __clk_set_parent_before() and _after() to
+		 * to properly migrate any prepare/enable count of the orphan
+		 * clock. This is important for CLK_IS_CRITICAL clocks, which
+		 * are enabled during init but might not have a parent yet.
+		 */
+		if (parent) {
+			/* update the clk tree topology */
+			__clk_set_parent_before(orphan, parent);
+			__clk_set_parent_after(orphan, parent, NULL);
+			__clk_recalc_accuracies(orphan);
+			__clk_recalc_rates(orphan, 0);
+		}
+	}
+}
+
+static void clk_core_reparent_orphans(void)
+{
+	clk_prepare_lock();
+	clk_core_reparent_orphans_nolock();
+	clk_prepare_unlock();
+}
+
 /**
  * __clk_core_init - initialize the data structures in a struct clk_core
  * @core:	clk_core being initialized
@@ -3241,8 +3276,6 @@ static inline void clk_debug_unregister(struct clk_core *core)
 static int __clk_core_init(struct clk_core *core)
 {
 	int ret;
-	struct clk_core *orphan;
-	struct hlist_node *tmp2;
 	unsigned long rate;
 
 	if (!core)
@@ -3389,27 +3422,8 @@ static int __clk_core_init(struct clk_core *core)
 		clk_enable_unlock(flags);
 	}
 
-	/*
-	 * walk the list of orphan clocks and reparent any that newly finds a
-	 * parent.
-	 */
-	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
-		struct clk_core *parent = __clk_init_parent(orphan);
+	clk_core_reparent_orphans_nolock();
 
-		/*
-		 * We need to use __clk_set_parent_before() and _after() to
-		 * to properly migrate any prepare/enable count of the orphan
-		 * clock. This is important for CLK_IS_CRITICAL clocks, which
-		 * are enabled during init but might not have a parent yet.
-		 */
-		if (parent) {
-			/* update the clk tree topology */
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
-			__clk_recalc_accuracies(orphan);
-			__clk_recalc_rates(orphan, 0);
-		}
-	}
 
 	kref_init(&core->ref);
 out:
@@ -4255,6 +4269,8 @@ int of_clk_add_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clock from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
@@ -4290,6 +4306,8 @@ int of_clk_add_hw_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clk_hw provider from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
-- 
2.20.1

[PATCH 5.4 069/165] mac80211: fix TID field in monitor mode transmit

[Greg Kroah-Hartman]

From: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>

[ Upstream commit 753ffad3d6243303994227854d951ff5c70fa9e0 ]

Fix overwriting of the qos_ctrl.tid field for encrypted frames injected on
a monitor interface. While qos_ctrl.tid is not encrypted, it's used as an
input into the encryption algorithm so it's protected, and thus cannot be
modified after encryption. For injected frames, the encryption may already
have been done in userspace, so we cannot change any fields.

Before passing the frame to the driver, the qos_ctrl.tid field is updated
from skb->priority. Prior to dbd50a851c50 skb->priority was updated in
ieee80211_select_queue_80211(), but this function is no longer always
called.

Update skb->priority in ieee80211_monitor_start_xmit() so that the value
is stored, and when later code 'modifies' the TID it really sets it to
the same value as before, preserving the encryption.

Fixes: dbd50a851c50 ("mac80211: only allocate one queue when using iTXQs")
Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Link: https://lore.kernel.org/r/20191119133451.14711-1-fredrik.olofsson@anyfinetworks.com
[rewrite commit message based on our discussion]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 1fa422782905..cbd273c0b275 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2263,6 +2263,15 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
 						    payload[7]);
 	}
 
+	/*
+	 * Initialize skb->priority for QoS frames. This is put in the TID field
+	 * of the frame before passing it to the driver.
+	 */
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *p = ieee80211_get_qos_ctl(hdr);
+		skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+	}
+
 	memset(info, 0, sizeof(*info));
 
 	info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
-- 
2.20.1

[PATCH 5.4 070/165] cfg80211: fix double-free after changing network namespace

[Greg Kroah-Hartman]

From: Stefan Bühler <source@stbuehler.de>

[ Upstream commit 56cb31e185adb61f930743a9b70e700a43625386 ]

If wdev->wext.keys was initialized it didn't get reset to NULL on
unregister (and it doesn't get set in cfg80211_init_wdev either), but
wdev is reused if unregister was triggered through
cfg80211_switch_netns.

The next unregister (for whatever reason) will try to free
wdev->wext.keys again.

Signed-off-by: Stefan Bühler <source@stbuehler.de>
Link: https://lore.kernel.org/r/20191126100543.782023-1-stefan.buehler@tik.uni-stuttgart.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 350513744575..3e25229a059d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1102,6 +1102,7 @@ static void __cfg80211_unregister_wdev(struct wireless_dev *wdev, bool sync)
 
 #ifdef CONFIG_CFG80211_WEXT
 	kzfree(wdev->wext.keys);
+	wdev->wext.keys = NULL;
 #endif
 	/* only initialized if we have a netdev */
 	if (wdev->netdev)
-- 
2.20.1

[PATCH 5.4 071/165] pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio

[Greg Kroah-Hartman]

From: Alexandre Torgue <alexandre.torgue@st.com>

[ Upstream commit 6ba2fd391ac58c1a26874f10c3054a1ea4aca2d0 ]

This commit adds a check on ops pointer to avoid a kernel panic when
ops->strict is used. Indeed, on some pinctrl driver (at least for
pinctrl-stmfx) the pinmux ops is not implemented. Let's assume than gpio
can be used in this case.

Fixes: 472a61e777fe ("pinctrl/gpio: Take MUX usage into account")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20191204144106.10876-1-alexandre.torgue@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinmux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index e914f6efd39e..9503ddf2edc7 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -85,7 +85,7 @@ bool pinmux_can_be_used_for_gpio(struct pinctrl_dev *pctldev, unsigned pin)
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
 
 	/* Can't inspect pin, assume it can be used */
-	if (!desc)
+	if (!desc || !ops)
 		return true;
 
 	if (ops->strict && desc->mux_usecount)
-- 
2.20.1

[PATCH 5.4 072/165] powerpc: Ensure that swiotlb buffer is allocated from low memory

[Greg Kroah-Hartman]

From: Mike Rapoport <rppt@linux.ibm.com>

[ Upstream commit 8fabc623238e68b3ac63c0dd1657bf86c1fa33af ]

Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G.
If a system has more physical memory than this limit, the swiotlb
buffer is not addressable because it is allocated from memblock using
top-down mode.

Force memblock to bottom-up mode before calling swiotlb_init() to
ensure that the swiotlb buffer is DMA-able.

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/mem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index d30a2e6e68b4..9f5b32163bda 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -282,6 +282,14 @@ void __init mem_init(void)
 	BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
 
 #ifdef CONFIG_SWIOTLB
+	/*
+	 * Some platforms (e.g. 85xx) limit DMA-able memory way below
+	 * 4G. We force memblock to bottom-up mode to ensure that the
+	 * memory allocated in swiotlb_init() is DMA-able.
+	 * As it's the last memblock allocation, no need to reset it
+	 * back to to-down.
+	 */
+	memblock_set_bottom_up(true);
 	swiotlb_init(0);
 #endif
 
-- 
2.20.1

[PATCH 5.4 073/165] btrfs: Fix error messages in qgroup_rescan_init

[Greg Kroah-Hartman]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 37d02592f11bb76e4ab1dcaa5b8a2a0715403207 ]

The branch of qgroup_rescan_init which is executed from the mount
path prints wrong errors messages. The textual print out in case
BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not
set are transposed. Fix it by exchanging their place.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 27a903aaf43b..aeb5f2f3cdd7 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -3232,12 +3232,12 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid,
 		if (!(fs_info->qgroup_flags &
 		      BTRFS_QGROUP_STATUS_FLAG_RESCAN)) {
 			btrfs_warn(fs_info,
-			"qgroup rescan init failed, qgroup is not enabled");
+			"qgroup rescan init failed, qgroup rescan is not queued");
 			ret = -EINVAL;
 		} else if (!(fs_info->qgroup_flags &
 			     BTRFS_QGROUP_STATUS_FLAG_ON)) {
 			btrfs_warn(fs_info,
-			"qgroup rescan init failed, qgroup rescan is not queued");
+			"qgroup rescan init failed, qgroup is not enabled");
 			ret = -EINVAL;
 		}
 
-- 
2.20.1

[PATCH 5.4 074/165] Btrfs: fix cloning range with a hole when using the NO_HOLES feature

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit fcb970581dd900675c4371c2b688a57924a8368c ]

When using the NO_HOLES feature if we clone a range that contains a hole
and a temporary ENOSPC happens while dropping extents from the target
inode's range, we can end up failing and aborting the transaction with
-EEXIST or with a corrupt file extent item, that has a length greater
than it should and overlaps with other extents. For example when cloning
the following range from inode A to inode B:

  Inode A:

    extent A1                                          extent A2
  [ ----------- ]  [ hole, implicit, 4MB length ]  [ ------------- ]
  0            1MB                                 5MB            6MB

  Range to clone: [1MB, 6MB)

  Inode B:

    extent B1       extent B2        extent B3         extent B4
  [ ---------- ]  [ --------- ]    [ ---------- ]    [ ---------- ]
  0           1MB 1MB        2MB   2MB        5MB    5MB         6MB

  Target range: [1MB, 6MB) (same as source, to make it easier to explain)

The following can happen:

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 2MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 2MB - 1MB =
   1MB;

4) We then attempt to insert a file extent item at inode B with a file
   offset of 5MB, which is the value of clone_info->file_offset. This
   fails with error -EEXIST because there's already an extent at that
   offset (extent B4);

5) We abort the current transaction with -EEXIST and return that error
   to user space as well.

Another example, for extent corruption:

  Inode A:

    extent A1                                           extent A2
  [ ----------- ]   [ hole, implicit, 10MB length ]  [ ------------- ]
  0            1MB                                  11MB            12MB

  Inode B:

    extent B1         extent B2
  [ ----------- ]   [ --------- ]    [ ----------------------------- ]
  0            1MB 1MB         5MB  5MB                             12MB

  Target range: [1MB, 12MB) (same as source, to make it easier to explain)

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 5MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 5MB - 1MB =
   4MB;

4) We then insert a file extent item at inode B with a file offset of 11MB
   which is the value of clone_info->file_offset, and a length of 4MB (the
   value of 'clone_len'). So we get 2 extents items with ranges that
   overlap and an extent length of 4MB, larger then the extent A2 from
   inode A (1MB length);

5) After that we end the transaction, balance the btree dirty pages and
   then start another or join the previous transaction. It might happen
   that the transaction which inserted the incorrect extent was committed
   by another task so we end up with extent corruption if a power failure
   happens.

So fix this by making sure we attempt to insert the extent to clone at
the destination inode only if we are past dropping the sub-range that
corresponds to a hole.

Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index c332968f9056..eaafd00f93d4 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2601,8 +2601,8 @@ int btrfs_punch_hole_range(struct inode *inode, struct btrfs_path *path,
 			}
 		}
 
-		if (clone_info) {
-			u64 clone_len = drop_end - cur_offset;
+		if (clone_info && drop_end > clone_info->file_offset) {
+			u64 clone_len = drop_end - clone_info->file_offset;
 
 			ret = btrfs_insert_clone_extent(trans, inode, path,
 							clone_info, clone_len);
-- 
2.20.1

[PATCH 5.4 075/165] powerpc/vcpu: Assume dedicated processors as non-preempt

[Greg Kroah-Hartman]

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

commit 14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.

With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.

On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.

Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.

On a Power9 System with 32 cores:
  # lscpu
  Architecture:        ppc64le
  Byte Order:          Little Endian
  CPU(s):              128
  On-line CPU(s) list: 0-127
  Thread(s) per core:  8
  Core(s) per socket:  1
  Socket(s):           16
  NUMA node(s):        2
  Model:               2.2 (pvr 004e 0202)
  Model name:          POWER9 (architected), altivec supported
  Hypervisor vendor:   pHyp
  Virtualization type: para
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            512K
  L3 cache:            10240K
  NUMA node0 CPU(s):   0-63
  NUMA node1 CPU(s):   64-127

  # perf stat -a -r 5 ./schbench
  v5.4                               v5.4 + patch
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 45
        75.0000th: 62                      75.0th: 63
        90.0000th: 71                      90.0th: 74
        95.0000th: 77                      95.0th: 78
        *99.0000th: 91                     *99.0th: 82
        99.5000th: 707                     99.5th: 83
        99.9000th: 6920                    99.9th: 86
        min=0, max=10048                   min=0, max=96
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 72                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 691                    *99.0th: 83
        99.5000th: 3972                    99.5th: 85
        99.9000th: 8368                    99.9th: 91
        min=0, max=16606                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 71                      90.0th: 75
        95.0000th: 77                      95.0th: 79
        *99.0000th: 106                    *99.0th: 83
        99.5000th: 2364                    99.5th: 84
        99.9000th: 7480                    99.9th: 90
        min=0, max=10001                   min=0, max=95
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 47
        75.0000th: 62                      75.0th: 65
        90.0000th: 72                      90.0th: 75
        95.0000th: 78                      95.0th: 79
        *99.0000th: 93                     *99.0th: 84
        99.5000th: 108                     99.5th: 85
        99.9000th: 6792                    99.9th: 90
        min=0, max=17681                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 46                      50.0th: 45
        75.0000th: 62                      75.0th: 64
        90.0000th: 73                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 113                    *99.0th: 82
        99.5000th: 2724                    99.5th: 83
        99.9000th: 6184                    99.9th: 93
        min=0, max=9887                    min=0, max=111

   Performance counter stats for 'system wide' (5 runs):

  context-switches    43,373  ( +-  0.40% )   44,597 ( +-  0.55% )
  cpu-migrations       1,211  ( +-  5.04% )      220 ( +-  6.23% )
  page-faults         15,983  ( +-  5.21% )   15,360 ( +-  3.38% )

Waiman Long suggested using static_keys.

Fixes: 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah <parth@linux.ibm.com>
Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Tested-by: Parth Shah <parth@linux.ibm.com>
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/spinlock.h    |    4 +++-
 arch/powerpc/platforms/pseries/setup.c |    7 +++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -36,10 +36,12 @@
 #endif
 
 #ifdef CONFIG_PPC_PSERIES
+DECLARE_STATIC_KEY_FALSE(shared_processor);
+
 #define vcpu_is_preempted vcpu_is_preempted
 static inline bool vcpu_is_preempted(int cpu)
 {
-	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+	if (!static_branch_unlikely(&shared_processor))
 		return false;
 	return !!(be32_to_cpu(lppaca_of(cpu).yield_count) & 1);
 }
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -74,6 +74,9 @@
 #include "pseries.h"
 #include "../../../../drivers/pci/pci.h"
 
+DEFINE_STATIC_KEY_FALSE(shared_processor);
+EXPORT_SYMBOL_GPL(shared_processor);
+
 int CMO_PrPSP = -1;
 int CMO_SecPSP = -1;
 unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
@@ -758,6 +761,10 @@ static void __init pSeries_setup_arch(vo
 
 	if (firmware_has_feature(FW_FEATURE_LPAR)) {
 		vpa_init(boot_cpuid);
+
+		if (lppaca_shared_proc(get_lppaca()))
+			static_branch_enable(&shared_processor);
+
 		ppc_md.power_save = pseries_lpar_idle;
 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
 #ifdef CONFIG_PCI_IOV

[PATCH 5.4 076/165] powerpc/spinlocks: Include correct header for static key

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 6da3eced8c5f3b03340b0c395bacd552c4d52411 upstream.

Recently, the spinlock implementation grew a static key optimization,
but the jump_label.h header include was left out, leading to build
errors:

  linux/arch/powerpc/include/asm/spinlock.h:44:7: error: implicit declaration of function ‘static_branch_unlikely’
   44 |  if (!static_branch_unlikely(&shared_processor))

This commit adds the missing header.

mpe: The build break is only seen with CONFIG_JUMP_LABEL=n.

Fixes: 656c21d6af5d ("powerpc/shared: Use static key to detect shared processor")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223133147.129983-1-Jason@zx2c4.com
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/spinlock.h |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -15,6 +15,7 @@
  *
  * (the type definitions are in asm/spinlock_types.h)
  */
+#include <linux/jump_label.h>
 #include <linux/irqflags.h>
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>

[PATCH 5.4 077/165] btrfs: handle error in btrfs_cache_block_group

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit db8fe64f9ce61d1d89d3c3c34d111a43afb9f053 ]

We have a BUG_ON(ret < 0) in find_free_extent from
btrfs_cache_block_group.  If we fail to allocate our ctl we'll just
panic, which is not good.  Instead just go on to another block group.
If we fail to find a block group we don't want to return ENOSPC, because
really we got a ENOMEM and that's the root of the problem.  Save our
return from btrfs_cache_block_group(), and then if we still fail to make
our allocation return that ret so we get the right error back.

Tested with inject-error.py from bcc.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/extent-tree.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index eb95ed78a18e..dc50605ecbda 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3781,6 +3781,7 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 				u64 flags, int delalloc)
 {
 	int ret = 0;
+	int cache_block_group_error = 0;
 	struct btrfs_free_cluster *last_ptr = NULL;
 	struct btrfs_block_group_cache *block_group = NULL;
 	struct find_free_extent_ctl ffe_ctl = {0};
@@ -3940,7 +3941,20 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 		if (unlikely(!ffe_ctl.cached)) {
 			ffe_ctl.have_caching_bg = true;
 			ret = btrfs_cache_block_group(block_group, 0);
-			BUG_ON(ret < 0);
+
+			/*
+			 * If we get ENOMEM here or something else we want to
+			 * try other block groups, because it may not be fatal.
+			 * However if we can't find anything else we need to
+			 * save our return here so that we return the actual
+			 * error that caused problems, not ENOSPC.
+			 */
+			if (ret < 0) {
+				if (!cache_block_group_error)
+					cache_block_group_error = ret;
+				ret = 0;
+				goto loop;
+			}
 			ret = 0;
 		}
 
@@ -4027,7 +4041,7 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 	if (ret > 0)
 		goto search;
 
-	if (ret == -ENOSPC) {
+	if (ret == -ENOSPC && !cache_block_group_error) {
 		/*
 		 * Use ffe_ctl->total_free_space as fallback if we can't find
 		 * any contiguous hole.
@@ -4038,6 +4052,8 @@ static noinline int find_free_extent(struct btrfs_fs_info *fs_info,
 		space_info->max_extent_size = ffe_ctl.max_extent_size;
 		spin_unlock(&space_info->lock);
 		ins->offset = ffe_ctl.max_extent_size;
+	} else if (ret == -ENOSPC) {
+		ret = cache_block_group_error;
 	}
 	return ret;
 }
-- 
2.20.1

[PATCH 5.4 078/165] Btrfs: fix hole extent items with a zero size after range cloning

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 147271e35ba267506dde6550f58ccf8d287db3ef ]

Normally when cloning a file range if we find an implicit hole at the end
of the range we assume it is because the NO_HOLES feature is enabled.
However that is not always the case. One well known case [1] is when we
have a power failure after mixing buffered and direct IO writes against
the same file.

In such cases we need to punch a hole in the destination file, and if
the NO_HOLES feature is not enabled, we need to insert explicit file
extent items to represent the hole. After commit 690a5dbfc51315
("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning
extents"), we started to insert file extent items representing the hole
with an item size of 0, which is invalid and should be 53 bytes (the size
of a btrfs_file_extent_item structure), resulting in all sorts of
corruptions and invalid memory accesses. This is detected by the tree
checker when we attempt to write a leaf to disk.

The problem can be sporadically triggered by test case generic/561 from
fstests. That test case does not exercise power failure and creates a new
filesystem when it starts, so it does not use a filesystem created by any
previous test that tests power failure. However the test does both
buffered and direct IO writes (through fsstress) and it's precisely that
which is creating the implicit holes in files. That happens even before
the commit mentioned earlier. I need to investigate why we get those
implicit holes to check if there is a real problem or not. For now this
change fixes the regression of introducing file extent items with an item
size of 0 bytes.

Fix the issue by calling btrfs_punch_hole_range() without passing a
btrfs_clone_extent_info structure, which ensures file extent items are
inserted to represent the hole with a correct item size. We were passing
a btrfs_clone_extent_info with a value of 0 for its 'item_size' field,
which was causing the insertion of file extent items with an item size
of 0.

[1] https://www.spinics.net/lists/linux-btrfs/msg75350.html

Reported-by: David Sterba <dsterba@suse.com>
Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ioctl.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index a56dcc0c9c2a..5720e450a46f 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3727,24 +3727,18 @@ static int btrfs_clone(struct inode *src, struct inode *inode,
 	ret = 0;
 
 	if (last_dest_end < destoff + len) {
-		struct btrfs_clone_extent_info clone_info = { 0 };
 		/*
-		 * We have an implicit hole (NO_HOLES feature is enabled) that
-		 * fully or partially overlaps our cloning range at its end.
+		 * We have an implicit hole that fully or partially overlaps our
+		 * cloning range at its end. This means that we either have the
+		 * NO_HOLES feature enabled or the implicit hole happened due to
+		 * mixing buffered and direct IO writes against this file.
 		 */
 		btrfs_release_path(path);
 		path->leave_spinning = 0;
 
-		/*
-		 * We are dealing with a hole and our clone_info already has a
-		 * disk_offset of 0, we only need to fill the data length and
-		 * file offset.
-		 */
-		clone_info.data_len = destoff + len - last_dest_end;
-		clone_info.file_offset = last_dest_end;
 		ret = btrfs_punch_hole_range(inode, path,
 					     last_dest_end, destoff + len - 1,
-					     &clone_info, &trans);
+					     NULL, &trans);
 		if (ret)
 			goto out;
 
-- 
2.20.1

[PATCH 5.4 079/165] ocxl: Fix potential memory leak on context creation

[Greg Kroah-Hartman]

From: Frederic Barrat <fbarrat@linux.ibm.com>

[ Upstream commit 913e73c77d48aeeb50c16450a653dca9c71ae2e2 ]

If we couldn't fully init a context, we were leaking memory.

Fixes: b9721d275cc2 ("ocxl: Allow external drivers to use OpenCAPI contexts")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209105513.8566-1-fbarrat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/ocxl/context.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/ocxl/context.c b/drivers/misc/ocxl/context.c
index 994563a078eb..de8a66b9d76b 100644
--- a/drivers/misc/ocxl/context.c
+++ b/drivers/misc/ocxl/context.c
@@ -10,18 +10,17 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	int pasid;
 	struct ocxl_context *ctx;
 
-	*context = kzalloc(sizeof(struct ocxl_context), GFP_KERNEL);
-	if (!*context)
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
 		return -ENOMEM;
 
-	ctx = *context;
-
 	ctx->afu = afu;
 	mutex_lock(&afu->contexts_lock);
 	pasid = idr_alloc(&afu->contexts_idr, ctx, afu->pasid_base,
 			afu->pasid_base + afu->pasid_max, GFP_KERNEL);
 	if (pasid < 0) {
 		mutex_unlock(&afu->contexts_lock);
+		kfree(ctx);
 		return pasid;
 	}
 	afu->pasid_count++;
@@ -43,6 +42,7 @@ int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
 	 * duration of the life of the context
 	 */
 	ocxl_afu_get(afu);
+	*context = ctx;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ocxl_context_alloc);
-- 
2.20.1

[PATCH 5.4 080/165] bpf: Clear skb->tstamp in bpf_redirect when necessary

[Greg Kroah-Hartman]

From: Lorenz Bauer <lmb@cloudflare.com>

[ Upstream commit 5133498f4ad1123a5ffd4c08df6431dab882cc32 ]

Redirecting a packet from ingress to egress by using bpf_redirect
breaks if the egress interface has an fq qdisc installed. This is the same
problem as fixed in 'commit 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")

Clear skb->tstamp when redirecting into the egress path.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20191213180817.2510-1-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 6d0111bfdb4a..2f76461c120d 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2055,6 +2055,7 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb)
 	}
 
 	skb->dev = dev;
+	skb->tstamp = 0;
 
 	dev_xmit_recursion_inc();
 	ret = dev_queue_xmit(skb);
-- 
2.20.1

[PATCH 5.4 081/165] habanalabs: rate limit error msg on waiting for CS

[Greg Kroah-Hartman]

From: Oded Gabbay <oded.gabbay@gmail.com>

[ Upstream commit 018e0e3594f7dcd029d258e368c485e742fa9cdb ]

In case a user submits a CS, and the submission fails, and the user doesn't
check the return value and instead use the error return value as a valid
sequence number of a CS and ask to wait on it, the driver will print an
error and return an error code for that wait.

The real problem happens if now the user ignores the error of the wait, and
try to wait again and again. This can lead to a flood of error messages
from the driver and even soft lockup event.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/habanalabs/command_submission.c | 5 +++--
 drivers/misc/habanalabs/context.c            | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c
index a9ac045dcfde..447f307ef4d6 100644
--- a/drivers/misc/habanalabs/command_submission.c
+++ b/drivers/misc/habanalabs/command_submission.c
@@ -777,8 +777,9 @@ int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
 	memset(args, 0, sizeof(*args));
 
 	if (rc < 0) {
-		dev_err(hdev->dev, "Error %ld on waiting for CS handle %llu\n",
-			rc, seq);
+		dev_err_ratelimited(hdev->dev,
+				"Error %ld on waiting for CS handle %llu\n",
+				rc, seq);
 		if (rc == -ERESTARTSYS) {
 			args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED;
 			rc = -EINTR;
diff --git a/drivers/misc/habanalabs/context.c b/drivers/misc/habanalabs/context.c
index 17db7b3dfb4c..2df6fb87e7ff 100644
--- a/drivers/misc/habanalabs/context.c
+++ b/drivers/misc/habanalabs/context.c
@@ -176,7 +176,7 @@ struct dma_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
 	spin_lock(&ctx->cs_lock);
 
 	if (seq >= ctx->cs_sequence) {
-		dev_notice(hdev->dev,
+		dev_notice_ratelimited(hdev->dev,
 			"Can't wait on seq %llu because current CS is at seq %llu\n",
 			seq, ctx->cs_sequence);
 		spin_unlock(&ctx->cs_lock);
-- 
2.20.1

[PATCH 5.4 082/165] habanalabs: remove variable val set but not used

[Greg Kroah-Hartman]

From: Chen Wandun <chenwandun@huawei.com>

[ Upstream commit 68a1fdf2451f38b4ada0607eb6e1303f8a02e0b7 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/misc/habanalabs/goya/goya.c: In function goya_pldm_init_cpu:
drivers/misc/habanalabs/goya/goya.c:2195:6: warning: variable val set but not used [-Wunused-but-set-variable]
drivers/misc/habanalabs/goya/goya.c: In function goya_hw_init:
drivers/misc/habanalabs/goya/goya.c:2505:6: warning: variable val set but not used [-Wunused-but-set-variable]

Fixes: 9494a8dd8d22 ("habanalabs: add h/w queues module")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/habanalabs/goya/goya.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 6fba14b81f90..fe3574a83b7c 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -2171,7 +2171,7 @@ static int goya_push_linux_to_device(struct hl_device *hdev)
 
 static int goya_pldm_init_cpu(struct hl_device *hdev)
 {
-	u32 val, unit_rst_val;
+	u32 unit_rst_val;
 	int rc;
 
 	/* Must initialize SRAM scrambler before pushing u-boot to SRAM */
@@ -2179,14 +2179,14 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 
 	/* Put ARM cores into reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL, CPU_RESET_ASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	/* Reset the CA53 MACRO */
 	unit_rst_val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, CA53_RESET);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, unit_rst_val);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 
 	rc = goya_push_uboot_to_device(hdev);
 	if (rc)
@@ -2207,7 +2207,7 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 	/* Release ARM core 0 from reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL,
 					CPU_RESET_CORE0_DEASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	return 0;
 }
@@ -2475,13 +2475,12 @@ int goya_mmu_init(struct hl_device *hdev)
 static int goya_hw_init(struct hl_device *hdev)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
-	u32 val;
 	int rc;
 
 	dev_info(hdev->dev, "Starting initialization of H/W\n");
 
 	/* Perform read from the device to make sure device is up */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	/*
 	 * Let's mark in the H/W that we have reached this point. We check
@@ -2533,7 +2532,7 @@ static int goya_hw_init(struct hl_device *hdev)
 		goto disable_queues;
 
 	/* Perform read from the device to flush all MSI-X configuration */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	return 0;
 
-- 
2.20.1

[PATCH 5.4 083/165] bnx2x: Do not handle requests from VFs after parity

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 7113f796bbbced2470cd6d7379d50d7a7a78bf34 ]

Parity error from the hardware will cause PF to lose the state
of their VFs due to PF's internal reload and hardware reset following
the parity error. Restrict any configuration request from the VFs after
the parity as it could cause unexpected hardware behavior, only way
for VFs to recover would be to trigger FLR on VFs and reload them.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 12 ++++++++++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h |  1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c  | 12 ++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 192ff8d5da32..cff64e43bdd8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9976,10 +9976,18 @@ static void bnx2x_recovery_failed(struct bnx2x *bp)
  */
 static void bnx2x_parity_recover(struct bnx2x *bp)
 {
-	bool global = false;
 	u32 error_recovered, error_unrecovered;
-	bool is_parity;
+	bool is_parity, global = false;
+#ifdef CONFIG_BNX2X_SRIOV
+	int vf_idx;
+
+	for (vf_idx = 0; vf_idx < bp->requested_nr_virtfn; vf_idx++) {
+		struct bnx2x_virtf *vf = BP_VF(bp, vf_idx);
 
+		if (vf)
+			vf->state = VF_LOST;
+	}
+#endif
 	DP(NETIF_MSG_HW, "Handling parity\n");
 	while (1) {
 		switch (bp->recovery_state) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index b6ebd92ec565..3a716c015415 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -139,6 +139,7 @@ struct bnx2x_virtf {
 #define VF_ACQUIRED	1	/* VF acquired, but not initialized */
 #define VF_ENABLED	2	/* VF Enabled */
 #define VF_RESET	3	/* VF FLR'd, pending cleanup */
+#define VF_LOST		4	/* Recovery while VFs are loaded */
 
 	bool flr_clnup_stage;	/* true during flr cleanup */
 	bool malicious;		/* true if FW indicated so, until FLR */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 0752b7fa4d9c..ea0e9394f898 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -2107,6 +2107,18 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
 {
 	int i;
 
+	if (vf->state == VF_LOST) {
+		/* Just ack the FW and return if VFs are lost
+		 * in case of parity error. VFs are supposed to be timedout
+		 * on waiting for PF response.
+		 */
+		DP(BNX2X_MSG_IOV,
+		   "VF 0x%x lost, not handling the request\n", vf->abs_vfid);
+
+		storm_memset_vf_mbx_ack(bp, vf->abs_vfid);
+		return;
+	}
+
 	/* check if tlv type is known */
 	if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) {
 		/* Lock the per vf op mutex and note the locker's identity.
-- 
2.20.1

[PATCH 5.4 084/165] bnx2x: Fix logic to get total no. of PFs per engine

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit ee699f89bdbaa19c399804504241b5c531b48888 ]

Driver doesn't calculate total number of PFs configured on a
given engine correctly which messed up resources in the PFs
loaded on that engine, leading driver to exceed configuration
of resources (like vlan filters etc.) beyond the limit per
engine, which ended up with asserts from the firmware.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 8b08cb18e363..3f63ffd7561b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1109,7 +1109,7 @@ static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp)
 		for (i = 0; i < E1H_FUNC_MAX / 2; i++) {
 			u32 func_config =
 				MF_CFG_RD(bp,
-					  func_mf_config[BP_PORT(bp) + 2 * i].
+					  func_mf_config[BP_PATH(bp) + 2 * i].
 					  config);
 			func_num +=
 				((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1);
-- 
2.20.1

[PATCH 5.4 085/165] cxgb4: Fix kernel panic while accessing sge_info

[Greg Kroah-Hartman]

From: Vishal Kulkarni <vishal@chelsio.com>

[ Upstream commit 479a0d1376f6d97c60871442911f1394d4446a25 ]

The sge_info debugfs collects offload queue info even when offload
capability is disabled and leads to panic.

[  144.139871] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0
[  144.139876] Call Trace:
[  144.139887]  sge_queue_start+0x12/0x30 [cxgb4]
[  144.139897]  seq_read+0x1d4/0x3d0
[  144.139906]  full_proxy_read+0x50/0x70
[  144.139913]  vfs_read+0x89/0x140
[  144.139916]  ksys_read+0x55/0xd0
[  144.139924]  do_syscall_64+0x5b/0x1d0
[  144.139933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  144.139936] RIP: 0033:0x7f4b01493990

Fix this crash by skipping the offload queue access in sge_qinfo when
offload capability is disabled

Signed-off-by: Herat Ramani <herat@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index ae6a47dd7dc9..fb8ade9a05a9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -2996,6 +2996,9 @@ static int sge_queue_entries(const struct adapter *adap)
 	int tot_uld_entries = 0;
 	int i;
 
+	if (!is_uld(adap))
+		goto lld_only;
+
 	mutex_lock(&uld_mutex);
 	for (i = 0; i < CXGB4_TX_MAX; i++)
 		tot_uld_entries += sge_qinfo_uld_txq_entries(adap, i);
@@ -3006,6 +3009,7 @@ static int sge_queue_entries(const struct adapter *adap)
 	}
 	mutex_unlock(&uld_mutex);
 
+lld_only:
 	return DIV_ROUND_UP(adap->sge.ethqsets, 4) +
 	       tot_uld_entries +
 	       DIV_ROUND_UP(MAX_CTRL_QUEUES, 4) + 1;
-- 
2.20.1

[PATCH 5.4 086/165] net: usb: lan78xx: Fix error message format specifier

[Greg Kroah-Hartman]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 858ce8ca62ea1530f2779d0e3f934b0176e663c3 ]

Display the return code as decimal integer.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 0becc79fd431..e3cdfdde2265 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -511,7 +511,7 @@ static int lan78xx_read_stats(struct lan78xx_net *dev,
 		}
 	} else {
 		netdev_warn(dev->net,
-			    "Failed to read stat ret = 0x%x", ret);
+			    "Failed to read stat ret = %d", ret);
 	}
 
 	kfree(stats);
-- 
2.20.1

[PATCH 5.4 087/165] parisc: fix compilation when KEXEC=n and KEXEC_FILE=y

[Greg Kroah-Hartman]

From: Sven Schnelle <svens@stackframe.org>

[ Upstream commit e16260c21f87b16a33ae8ecac9e8c79f3a8b89bd ]

Fix compilation when the CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/kexec.h | 4 ----
 arch/parisc/kernel/Makefile     | 2 +-
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/parisc/include/asm/kexec.h b/arch/parisc/include/asm/kexec.h
index a99ea747d7ed..87e174006995 100644
--- a/arch/parisc/include/asm/kexec.h
+++ b/arch/parisc/include/asm/kexec.h
@@ -2,8 +2,6 @@
 #ifndef _ASM_PARISC_KEXEC_H
 #define _ASM_PARISC_KEXEC_H
 
-#ifdef CONFIG_KEXEC
-
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
@@ -32,6 +30,4 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* CONFIG_KEXEC */
-
 #endif /* _ASM_PARISC_KEXEC_H */
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 2663c8f8be11..068d90950d93 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -37,5 +37,5 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_KPROBES)			+= kprobes.o
-obj-$(CONFIG_KEXEC)			+= kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)		+= kexec.o relocate_kernel.o
 obj-$(CONFIG_KEXEC_FILE)		+= kexec_file.o
-- 
2.20.1

[PATCH 5.4 088/165] parisc: add missing __init annotation

[Greg Kroah-Hartman]

From: Sven Schnelle <svens@stackframe.org>

[ Upstream commit aeea5eae4fd54e94d820ed17ea3b238160be723e ]

compilation failed with:

MODPOST vmlinux.o
WARNING: vmlinux.o(.text.unlikely+0xa0c): Section mismatch in reference from the function walk_lower_bus() to the function .init.text:walk_native_bus()
The function walk_lower_bus() references
the function __init walk_native_bus().
This is often because walk_lower_bus lacks a __init
annotation or the annotation of walk_native_bus is wrong.

FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[2]: *** [/home/svens/linux/parisc-linux/src/scripts/Makefile.modpost:64: __modpost] Error 1
make[1]: *** [/home/svens/linux/parisc-linux/src/Makefile:1077: vmlinux] Error 2
make[1]: Leaving directory '/home/svens/linux/parisc-linux/build'
make: *** [Makefile:179: sub-make] Error 2

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/drivers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 3b330e58a4f0..a6c9f49c6612 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -810,7 +810,7 @@ EXPORT_SYMBOL(device_to_hwpath);
 static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
                             struct device *parent);
 
-static void walk_lower_bus(struct parisc_device *dev)
+static void __init walk_lower_bus(struct parisc_device *dev)
 {
 	unsigned long io_io_low, io_io_high;
 
-- 
2.20.1

[PATCH 5.4 089/165] rfkill: Fix incorrect check to avoid NULL pointer dereference

[Greg Kroah-Hartman]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 6fc232db9e8cd50b9b83534de9cd91ace711b2d7 ]

In rfkill_register, the struct rfkill pointer is first derefernced
and then checked for NULL. This patch removes the BUG_ON and returns
an error to the caller in case rfkill is NULL.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rfkill/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 0bf9bf1ceb8f..6c089320ae4f 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -1002,10 +1002,13 @@ static void rfkill_sync_work(struct work_struct *work)
 int __must_check rfkill_register(struct rfkill *rfkill)
 {
 	static unsigned long rfkill_no;
-	struct device *dev = &rfkill->dev;
+	struct device *dev;
 	int error;
 
-	BUG_ON(!rfkill);
+	if (!rfkill)
+		return -EINVAL;
+
+	dev = &rfkill->dev;
 
 	mutex_lock(&rfkill_global_mutex);
 
-- 
2.20.1

[PATCH 5.4 090/165] ASoC: wm8962: fix lambda value

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 556672d75ff486e0b6786056da624131679e0576 ]

According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).

Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3e5c69fbc33a..d9d59f45833f 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2788,7 +2788,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	if (target % Fref == 0) {
 		fll_div->theta = 0;
-		fll_div->lambda = 0;
+		fll_div->lambda = 1;
 	} else {
 		gcd_fll = gcd(target, fratio * Fref);
 
@@ -2858,7 +2858,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 		return -EINVAL;
 	}
 
-	if (fll_div.theta || fll_div.lambda)
+	if (fll_div.theta)
 		fll1 |= WM8962_FLL_FRAC;
 
 	/* Stop the FLL while we reconfigure */
-- 
2.20.1

[PATCH 5.4 091/165] regulator: rn5t618: fix module aliases

[Greg Kroah-Hartman]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ]

platform device aliases were missing, preventing
autoloading of module.

Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/rn5t618-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index eb807a059479..aa6e7c5341ce 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -148,6 +148,7 @@ static struct platform_driver rn5t618_regulator_driver = {
 
 module_platform_driver(rn5t618_regulator_driver);
 
+MODULE_ALIAS("platform:rn5t618-regulator");
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
 MODULE_DESCRIPTION("RN5T618 regulator driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH 5.4 092/165] spi: nxp-fspi: Ensure width is respected in spi-mem operations

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 007773e16a6f3f49d1439554078c3ba8af131998 ]

Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.

Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.

Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20191211195730.26794-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-nxp-fspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 501b923f2c27..28ae5229f889 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -439,7 +439,7 @@ static bool nxp_fspi_supports_op(struct spi_mem *mem,
 	    op->data.nbytes > f->devtype_data->txfifo)
 		return false;
 
-	return true;
+	return spi_mem_default_supports_op(mem, op);
 }
 
 /* Instead of busy looping invoke readl_poll_timeout functionality. */
-- 
2.20.1

[PATCH 5.4 093/165] clk: at91: fix possible deadlock

[Greg Kroah-Hartman]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 6956eb33abb5deab2cd916b4c31226b57736bc3c ]

Lockdep warns about a possible circular locking dependency because using
syscon_node_to_regmap() will make the created regmap get and enable the
first clock it can parse from the device tree. This clock is not needed to
access the registers and should not be enabled at that time.

Use the recently introduced device_node_to_regmap to solve that as it looks
up the regmap in the same list but doesn't care about the clocks.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/at91sam9260.c | 2 +-
 drivers/clk/at91/at91sam9rl.c  | 2 +-
 drivers/clk/at91/at91sam9x5.c  | 2 +-
 drivers/clk/at91/pmc.c         | 2 +-
 drivers/clk/at91/sama5d2.c     | 2 +-
 drivers/clk/at91/sama5d4.c     | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index 0aabe49aed09..a9d4234758d7 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -348,7 +348,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 0ac34cdaa106..77fe83a73bf4 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -83,7 +83,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 0855f3a80cc7..086cf0b4955c 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -146,7 +146,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b03cfae3a9d..b71515acdec1 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -275,7 +275,7 @@ static int __init pmc_register_ops(void)
 
 	np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
 
-	pmcreg = syscon_node_to_regmap(np);
+	pmcreg = device_node_to_regmap(np);
 	if (IS_ERR(pmcreg))
 		return PTR_ERR(pmcreg);
 
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 0de1108737db..ff7e3f727082 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -162,7 +162,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 25b156d4e645..a6dee4a3b6e4 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -136,7 +136,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
-- 
2.20.1

[PATCH 5.4 094/165] staging: axis-fifo: add unspecified HAS_IOMEM dependency

[Greg Kroah-Hartman]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit d3aa8de6b5d0853c43c616586b4e232aa1fa7de9 ]

Currently CONFIG_XIL_AXIS_FIFO=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:

ld: drivers/staging/axis-fifo/axis-fifo.o: in function `axis_fifo_probe':
drivers/staging/axis-fifo/axis-fifo.c:809: undefined reference to `devm_ioremap_resource'

Fix the build error by adding the unspecified dependency.

Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20191211192742.95699-7-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/axis-fifo/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/axis-fifo/Kconfig b/drivers/staging/axis-fifo/Kconfig
index 3fffe4d6f327..f180a8e9f58a 100644
--- a/drivers/staging/axis-fifo/Kconfig
+++ b/drivers/staging/axis-fifo/Kconfig
@@ -4,7 +4,7 @@
 #
 config XIL_AXIS_FIFO
 	tristate "Xilinx AXI-Stream FIFO IP core driver"
-	depends on OF
+	depends on OF && HAS_IOMEM
 	help
 	  This adds support for the Xilinx AXI-Stream FIFO IP core driver.
 	  The AXI Streaming FIFO allows memory mapped access to a AXI Streaming
-- 
2.20.1

[PATCH 5.4 095/165] iommu/iova: Init the struct iova to fix the possible memleak

[Greg Kroah-Hartman]

From: Xiaotao Yin <xiaotao.yin@windriver.com>

[ Upstream commit 472d26df5e8075eda677b6be730e0fbf434ff2a8 ]

During ethernet(Marvell octeontx2) set ring buffer test:
ethtool -G eth1 rx <rx ring size> tx <tx ring size>
following kmemleak will happen sometimes:

unreferenced object 0xffff000b85421340 (size 64):
  comm "ethtool", pid 867, jiffies 4295323539 (age 550.500s)
  hex dump (first 64 bytes):
    80 13 42 85 0b 00 ff ff ff ff ff ff ff ff ff ff  ..B.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001b204ddf>] kmem_cache_alloc+0x1b0/0x350
    [<00000000d9ef2e50>] alloc_iova+0x3c/0x168
    [<00000000ea30f99d>] alloc_iova_fast+0x7c/0x2d8
    [<00000000b8bb2f1f>] iommu_dma_alloc_iova.isra.0+0x12c/0x138
    [<000000002f1a43b5>] __iommu_dma_map+0x8c/0xf8
    [<00000000ecde7899>] iommu_dma_map_page+0x98/0xf8
    [<0000000082004e59>] otx2_alloc_rbuf+0xf4/0x158
    [<000000002b107f6b>] otx2_rq_aura_pool_init+0x110/0x270
    [<00000000c3d563c7>] otx2_open+0x15c/0x734
    [<00000000a2f5f3a8>] otx2_dev_open+0x3c/0x68
    [<00000000456a98b5>] otx2_set_ringparam+0x1ac/0x1d4
    [<00000000f2fbb819>] dev_ethtool+0xb84/0x2028
    [<0000000069b67c5a>] dev_ioctl+0x248/0x3a0
    [<00000000af38663a>] sock_ioctl+0x280/0x638
    [<000000002582384c>] do_vfs_ioctl+0x8b0/0xa80
    [<000000004e1a2c02>] ksys_ioctl+0x84/0xb8

The reason:
When alloc_iova_mem() without initial with Zero, sometimes fpn_lo will
equal to IOVA_ANCHOR by chance, so when return with -ENOMEM(iova32_full)
from __alloc_and_insert_iova_range(), the new_iova will not be freed in
free_iova_mem().

Fixes: bb68b2fbfbd6 ("iommu/iova: Add rbtree anchor node")
Signed-off-by: Xiaotao Yin <xiaotao.yin@windriver.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iova.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 41c605b0058f..c7a914b9bbbc 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -233,7 +233,7 @@ static DEFINE_MUTEX(iova_cache_mutex);
 
 struct iova *alloc_iova_mem(void)
 {
-	return kmem_cache_alloc(iova_cache, GFP_ATOMIC);
+	return kmem_cache_zalloc(iova_cache, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(alloc_iova_mem);
 
-- 
2.20.1

[PATCH 5.4 096/165] kconfig: dont crash on NULL expressions in expr_eq()

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

[ Upstream commit 272a72103012862e3a24ea06635253ead0b6e808 ]

NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/expr.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 77ffff3a053c..9f1de58e9f0c 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -254,6 +254,13 @@ static int expr_eq(struct expr *e1, struct expr *e2)
 {
 	int res, old_count;
 
+	/*
+	 * A NULL expr is taken to be yes, but there's also a different way to
+	 * represent yes. expr_is_yes() checks for either representation.
+	 */
+	if (!e1 || !e2)
+		return expr_is_yes(e1) && expr_is_yes(e2);
+
 	if (e1->type != e2->type)
 		return 0;
 	switch (e1->type) {
-- 
2.20.1

[PATCH 5.4 097/165] scripts: package: mkdebian: add missing rsync dependency

[Greg Kroah-Hartman]

From: Enrico Weigelt, metux IT consult <info@metux.net>

[ Upstream commit a11391b6f50689adb22c65df783e09143fafb794 ]

We've missed the dependency to rsync, so build fails on
minimal containers.

Fixes: 59b2bd05f5f4 ("kbuild: add 'headers' target to build up uapi headers in usr/include")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/package/mkdebian | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index e0750b70453f..7c230016b08d 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -174,7 +174,7 @@ Source: $sourcename
 Section: kernel
 Priority: optional
 Maintainer: $maintainer
-Build-Depends: bc, kmod, cpio, bison, flex | flex:native $extra_build_depends
+Build-Depends: bc, rsync, kmod, cpio, bison, flex | flex:native $extra_build_depends
 Homepage: http://www.kernel.org/
 
 Package: $packagename
-- 
2.20.1

[PATCH 5.4 098/165] perf/x86: Fix potential out-of-bounds access

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 1e69a0efc0bd0e02b8327e7186fbb4a81878ea0b ]

UBSAN reported out-of-bound accesses for x86_pmu.event_map(), it's
arguments should be < x86_pmu.max_events. Make sure all users observe
this constraint.

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/core.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 7b21455d7504..b9673396b571 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1641,9 +1641,12 @@ static struct attribute_group x86_pmu_format_group __ro_after_init = {
 
 ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr, char *page)
 {
-	struct perf_pmu_events_attr *pmu_attr = \
+	struct perf_pmu_events_attr *pmu_attr =
 		container_of(attr, struct perf_pmu_events_attr, attr);
-	u64 config = x86_pmu.event_map(pmu_attr->id);
+	u64 config = 0;
+
+	if (pmu_attr->id < x86_pmu.max_events)
+		config = x86_pmu.event_map(pmu_attr->id);
 
 	/* string trumps id */
 	if (pmu_attr->event_str)
@@ -1712,6 +1715,9 @@ is_visible(struct kobject *kobj, struct attribute *attr, int idx)
 {
 	struct perf_pmu_events_attr *pmu_attr;
 
+	if (idx >= x86_pmu.max_events)
+		return 0;
+
 	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr.attr);
 	/* str trumps id */
 	return pmu_attr->event_str || x86_pmu.event_map(idx) ? attr->mode : 0;
-- 
2.20.1

[PATCH 5.4 099/165] perf/x86/intel: Fix PT PMI handling

[Greg Kroah-Hartman]

From: Alexander Shishkin <alexander.shishkin@linux.intel.com>

[ Upstream commit 92ca7da4bdc24d63bb0bcd241c11441ddb63b80a ]

Commit:

  ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")

skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but
also inadvertently skips the active_events bump for PT in that case, which
is a bug. If there aren't any hardware events at the same time as PT, the
PMI handler will ignore PT PMIs, as active_events reads zero in that case,
resulting in the "Uhhuh" spurious NMI warning and PT data loss.

Fix this by always increasing active_events for PT events.

Fixes: ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
Reported-by: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index b9673396b571..e622158f5659 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -375,7 +375,7 @@ int x86_add_exclusive(unsigned int what)
 	 * LBR and BTS are still mutually exclusive.
 	 */
 	if (x86_pmu.lbr_pt_coexist && what == x86_lbr_exclusive_pt)
-		return 0;
+		goto out;
 
 	if (!atomic_inc_not_zero(&x86_pmu.lbr_exclusive[what])) {
 		mutex_lock(&pmc_reserve_mutex);
@@ -387,6 +387,7 @@ int x86_add_exclusive(unsigned int what)
 		mutex_unlock(&pmc_reserve_mutex);
 	}
 
+out:
 	atomic_inc(&active_events);
 	return 0;
 
@@ -397,11 +398,15 @@ int x86_add_exclusive(unsigned int what)
 
 void x86_del_exclusive(unsigned int what)
 {
+	atomic_dec(&active_events);
+
+	/*
+	 * See the comment in x86_add_exclusive().
+	 */
 	if (x86_pmu.lbr_pt_coexist && what == x86_lbr_exclusive_pt)
 		return;
 
 	atomic_dec(&x86_pmu.lbr_exclusive[what]);
-	atomic_dec(&active_events);
 }
 
 int x86_setup_perfctr(struct perf_event *event)
-- 
2.20.1

[PATCH 5.4 100/165] sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime

[Greg Kroah-Hartman]

From: Johannes Weiner <hannes@cmpxchg.org>

[ Upstream commit 3dfbe25c27eab7c90c8a7e97b4c354a9d24dd985 ]

Jingfeng reports rare div0 crashes in psi on systems with some uptime:

[58914.066423] divide error: 0000 [#1] SMP
[58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O)
[58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1
[58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019
[58914.102728] Workqueue: events psi_update_work
[58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000
[58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330
[58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246
[58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640
[58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e
[58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000
[58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000
[58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78
[58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000
[58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0
[58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[58914.200360] PKRU: 55555554
[58914.203221] Stack:
[58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8
[58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000
[58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[58914.228734] Call Trace:
[58914.231337] [] psi_update_work+0x22/0x60
[58914.237067] [] process_one_work+0x189/0x420
[58914.243063] [] worker_thread+0x4e/0x4b0
[58914.248701] [] ? process_one_work+0x420/0x420
[58914.254869] [] kthread+0xe6/0x100
[58914.259994] [] ? kthread_park+0x60/0x60
[58914.265640] [] ret_from_fork+0x39/0x50
[58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1
[58914.279691] RIP [] psi_update_stats+0x1c1/0x330

The crashing instruction is trying to divide the observed stall time
by the sampling period. The period, stored in R8, is not 0, but we are
dividing by the lower 32 bits only, which are all 0 in this instance.

We could switch to a 64-bit division, but the period shouldn't be that
big in the first place. It's the time between the last update and the
next scheduled one, and so should always be around 2s and comfortably
fit into 32 bits.

The bug is in the initialization of new cgroups: we schedule the first
sampling event in a cgroup as an offset of sched_clock(), but fail to
initialize the last_update timestamp, and it defaults to 0. That
results in a bogusly large sampling period the first time we run the
sampling code, and consequently we underreport pressure for the first
2s of a cgroup's life. But worse, if sched_clock() is sufficiently
advanced on the system, and the user gets unlucky, the period's lower
32 bits can all be 0 and the sampling division will crash.

Fix this by initializing the last update timestamp to the creation
time of the cgroup, thus correctly marking the start of the first
pressure sampling period in a new cgroup.

Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/psi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index 517e3719027e..970db4686dd4 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -185,7 +185,8 @@ static void group_init(struct psi_group *group)
 
 	for_each_possible_cpu(cpu)
 		seqcount_init(&per_cpu_ptr(group->pcpu, cpu)->seq);
-	group->avg_next_update = sched_clock() + psi_period;
+	group->avg_last_update = sched_clock();
+	group->avg_next_update = group->avg_last_update + psi_period;
 	INIT_DELAYED_WORK(&group->avgs_work, psi_avgs_work);
 	mutex_init(&group->avgs_lock);
 	/* Init trigger-related members */
-- 
2.20.1

[PATCH 5.4 101/165] psi: Fix a division error in psi poll()

[Greg Kroah-Hartman]

From: Johannes Weiner <hannes@cmpxchg.org>

[ Upstream commit c3466952ca1514158d7c16c9cfc48c27d5c5dc0f ]

The psi window size is a u64 an can be up to 10 seconds right now,
which exceeds the lower 32 bits of the variable. We currently use
div_u64 for it, which is meant only for 32-bit divisors. The result is
garbage pressure sampling values and even potential div0 crashes.

Use div64_u64.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/psi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index 970db4686dd4..ce8f6748678a 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -482,7 +482,7 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 		u32 remaining;
 
 		remaining = win->size - elapsed;
-		growth += div_u64(win->prev_growth * remaining, win->size);
+		growth += div64_u64(win->prev_growth * remaining, win->size);
 	}
 
 	return growth;
-- 
2.20.1

[PATCH 5.4 102/165] usb: typec: fusb302: Fix an undefined reference to extcon_get_state

[Greg Kroah-Hartman]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit 547fc228755d79af648898187e7831a825d4f42c ]

Fixes the following compile error:

drivers/usb/typec/tcpm/fusb302.o: In function `tcpm_get_current_limit':
fusb302.c:(.text+0x3ee): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x422): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x450): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x48c): undefined reference to `extcon_get_state'
drivers/usb/typec/tcpm/fusb302.o: In function `fusb302_probe':
fusb302.c:(.text+0x980): undefined reference to `extcon_get_extcon_dev'
make: *** [vmlinux] Error 1

It is because EXTCON is build as a module, but FUSB302 is not.

Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1576239378-50795-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/tcpm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 72481bbb2af3..5b986d6c801d 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -32,6 +32,7 @@ endif # TYPEC_TCPCI
 config TYPEC_FUSB302
 	tristate "Fairchild FUSB302 Type-C chip driver"
 	depends on I2C
+	depends on EXTCON || !EXTCON
 	help
 	  The Fairchild FUSB302 Type-C chip driver that works with
 	  Type-C Port Controller Manager to provide USB PD and USB
-- 
2.20.1

[PATCH 5.4 103/165] block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT

[Greg Kroah-Hartman]

From: Roman Penyaev <rpenyaev@suse.de>

[ Upstream commit c58c1f83436b501d45d4050fd1296d71a9760bcb ]

Non-mq devs do not honor REQ_NOWAIT so give a chance to the caller to repeat
request gracefully on -EAGAIN error.

The problem is well reproduced using io_uring:

   mkfs.ext4 /dev/ram0
   mount /dev/ram0 /mnt

   # Preallocate a file
   dd if=/dev/zero of=/mnt/file bs=1M count=1

   # Start fio with io_uring and get -EIO
   fio --rw=write --ioengine=io_uring --size=1M --direct=1 --name=job --filename=/mnt/file

Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index d5e668ec751b..1075aaff606d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -886,11 +886,14 @@ generic_make_request_checks(struct bio *bio)
 	}
 
 	/*
-	 * For a REQ_NOWAIT based request, return -EOPNOTSUPP
-	 * if queue is not a request based queue.
+	 * Non-mq queues do not honor REQ_NOWAIT, so complete a bio
+	 * with BLK_STS_AGAIN status in order to catch -EAGAIN and
+	 * to give a chance to the caller to repeat request gracefully.
 	 */
-	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q))
-		goto not_supported;
+	if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q)) {
+		status = BLK_STS_AGAIN;
+		goto end_io;
+	}
 
 	if (should_fail_bio(bio))
 		goto end_io;
-- 
2.20.1

[PATCH 5.4 104/165] fs: avoid softlockups in s_inodes iterators

[Greg Kroah-Hartman]

From: Eric Sandeen <sandeen@redhat.com>

[ Upstream commit 04646aebd30b99f2cfa0182435a2ec252fcb16d0 ]

Anything that walks all inodes on sb->s_inodes list without rescheduling
risks softlockups.

Previous efforts were made in 2 functions, see:

c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
ac05fbb inode: don't softlockup when evicting inodes

but there hasn't been an audit of all walkers, so do that now.  This
also consistently moves the cond_resched() calls to the bottom of each
loop in cases where it already exists.

One loop remains: remove_dquot_ref(), because I'm not quite sure how
to deal with that one w/o taking the i_lock.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/drop_caches.c     | 2 +-
 fs/inode.c           | 7 +++++++
 fs/notify/fsnotify.c | 1 +
 fs/quota/dquot.c     | 1 +
 4 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index d31b6c72b476..dc1a1d5d825b 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -35,11 +35,11 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 		spin_unlock(&inode->i_lock);
 		spin_unlock(&sb->s_inode_list_lock);
 
-		cond_resched();
 		invalidate_mapping_pages(inode->i_mapping, 0, -1);
 		iput(toput_inode);
 		toput_inode = inode;
 
+		cond_resched();
 		spin_lock(&sb->s_inode_list_lock);
 	}
 	spin_unlock(&sb->s_inode_list_lock);
diff --git a/fs/inode.c b/fs/inode.c
index fef457a42882..96d62d97694e 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -676,6 +676,7 @@ int invalidate_inodes(struct super_block *sb, bool kill_dirty)
 	struct inode *inode, *next;
 	LIST_HEAD(dispose);
 
+again:
 	spin_lock(&sb->s_inode_list_lock);
 	list_for_each_entry_safe(inode, next, &sb->s_inodes, i_sb_list) {
 		spin_lock(&inode->i_lock);
@@ -698,6 +699,12 @@ int invalidate_inodes(struct super_block *sb, bool kill_dirty)
 		inode_lru_list_del(inode);
 		spin_unlock(&inode->i_lock);
 		list_add(&inode->i_lru, &dispose);
+		if (need_resched()) {
+			spin_unlock(&sb->s_inode_list_lock);
+			cond_resched();
+			dispose_list(&dispose);
+			goto again;
+		}
 	}
 	spin_unlock(&sb->s_inode_list_lock);
 
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 2ecef6155fc0..ac9eb273e28c 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -77,6 +77,7 @@ static void fsnotify_unmount_inodes(struct super_block *sb)
 
 		iput_inode = inode;
 
+		cond_resched();
 		spin_lock(&sb->s_inode_list_lock);
 	}
 	spin_unlock(&sb->s_inode_list_lock);
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 9b96243de081..7abc3230c21a 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -986,6 +986,7 @@ static int add_dquot_ref(struct super_block *sb, int type)
 		 * later.
 		 */
 		old_inode = inode;
+		cond_resched();
 		spin_lock(&sb->s_inode_list_lock);
 	}
 	spin_unlock(&sb->s_inode_list_lock);
-- 
2.20.1

[PATCH 5.4 105/165] fs: call fsnotify_sb_delete after evict_inodes

[Greg Kroah-Hartman]

From: Eric Sandeen <sandeen@redhat.com>

[ Upstream commit 1edc8eb2e93130e36ac74ac9c80913815a57d413 ]

When a filesystem is unmounted, we currently call fsnotify_sb_delete()
before evict_inodes(), which means that fsnotify_unmount_inodes()
must iterate over all inodes on the superblock looking for any inodes
with watches.  This is inefficient and can lead to livelocks as it
iterates over many unwatched inodes.

At this point, SB_ACTIVE is gone and dropping refcount to zero kicks
the inode out out immediately, so anything processed by
fsnotify_sb_delete / fsnotify_unmount_inodes gets evicted in that loop.

After that, the call to evict_inodes will evict everything else with a
zero refcount.

This should speed things up overall, and avoid livelocks in
fsnotify_unmount_inodes().

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/notify/fsnotify.c | 3 +++
 fs/super.c           | 4 +++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index ac9eb273e28c..f44e39c68328 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -57,6 +57,9 @@ static void fsnotify_unmount_inodes(struct super_block *sb)
 		 * doing an __iget/iput with SB_ACTIVE clear would actually
 		 * evict all inodes with zero i_count from icache which is
 		 * unnecessarily violent and may in fact be illegal to do.
+		 * However, we should have been called /after/ evict_inodes
+		 * removed all zero refcount inodes, in any case.  Test to
+		 * be sure.
 		 */
 		if (!atomic_read(&inode->i_count)) {
 			spin_unlock(&inode->i_lock);
diff --git a/fs/super.c b/fs/super.c
index cfadab2cbf35..cd352530eca9 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -448,10 +448,12 @@ void generic_shutdown_super(struct super_block *sb)
 		sync_filesystem(sb);
 		sb->s_flags &= ~SB_ACTIVE;
 
-		fsnotify_sb_delete(sb);
 		cgroup_writeback_umount();
 
+		/* evict all inodes with zero refcount */
 		evict_inodes(sb);
+		/* only nonzero refcount inodes can have marks */
+		fsnotify_sb_delete(sb);
 
 		if (sb->s_dio_done_wq) {
 			destroy_workqueue(sb->s_dio_done_wq);
-- 
2.20.1

[PATCH 5.4 106/165] perf/smmuv3: Remove the leftover put_cpu() in error path

[Greg Kroah-Hartman]

From: Hanjun Guo <guohanjun@huawei.com>

[ Upstream commit 8ae4bcf4821c18a8fbfa0b2c1df26c1085e9d923 ]

In smmu_pmu_probe(), there is put_cpu() in the error path,
which is wrong because we use raw_smp_processor_id() to
get the cpu ID, not get_cpu(), remove it.

While we are at it, kill 'out_cpuhp_err' altogether and
just return err if we fail to add the hotplug instance.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm_smmuv3_pmu.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index abcf54f7d19c..191f410cf35c 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -815,7 +815,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(dev, "Error %d registering hotplug, PMU @%pa\n",
 			err, &res_0->start);
-		goto out_cpuhp_err;
+		return err;
 	}
 
 	err = perf_pmu_register(&smmu_pmu->pmu, name, -1);
@@ -834,8 +834,6 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 
 out_unregister:
 	cpuhp_state_remove_instance_nocalls(cpuhp_state_num, &smmu_pmu->node);
-out_cpuhp_err:
-	put_cpu();
 	return err;
 }
 
-- 
2.20.1

[PATCH 5.4 107/165] iommu/dma: Relax locking in iommu_dma_prepare_msi()

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit c18647900ec864d401ba09b3bbd5b34f331f8d26 ]

Since commit ece6e6f0218b ("iommu/dma-iommu: Split iommu_dma_map_msi_msg()
in two parts"), iommu_dma_prepare_msi() should no longer have to worry
about preempting itself, nor being called in atomic context at all. Thus
we can downgrade the IRQ-safe locking to a simple mutex to avoid angering
the new might_sleep() check in iommu_map().

Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/dma-iommu.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index f321279baf9e..51456e7f264f 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -19,6 +19,7 @@
 #include <linux/iova.h>
 #include <linux/irq.h>
 #include <linux/mm.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/scatterlist.h>
 #include <linux/vmalloc.h>
@@ -43,7 +44,6 @@ struct iommu_dma_cookie {
 		dma_addr_t		msi_iova;
 	};
 	struct list_head		msi_page_list;
-	spinlock_t			msi_lock;
 
 	/* Domain for flush queue callback; NULL if flush queue not in use */
 	struct iommu_domain		*fq_domain;
@@ -62,7 +62,6 @@ static struct iommu_dma_cookie *cookie_alloc(enum iommu_dma_cookie_type type)
 
 	cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
 	if (cookie) {
-		spin_lock_init(&cookie->msi_lock);
 		INIT_LIST_HEAD(&cookie->msi_page_list);
 		cookie->type = type;
 	}
@@ -1150,7 +1149,7 @@ static struct iommu_dma_msi_page *iommu_dma_get_msi_page(struct device *dev,
 		if (msi_page->phys == msi_addr)
 			return msi_page;
 
-	msi_page = kzalloc(sizeof(*msi_page), GFP_ATOMIC);
+	msi_page = kzalloc(sizeof(*msi_page), GFP_KERNEL);
 	if (!msi_page)
 		return NULL;
 
@@ -1180,7 +1179,7 @@ int iommu_dma_prepare_msi(struct msi_desc *desc, phys_addr_t msi_addr)
 	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
 	struct iommu_dma_cookie *cookie;
 	struct iommu_dma_msi_page *msi_page;
-	unsigned long flags;
+	static DEFINE_MUTEX(msi_prepare_lock); /* see below */
 
 	if (!domain || !domain->iova_cookie) {
 		desc->iommu_cookie = NULL;
@@ -1190,13 +1189,13 @@ int iommu_dma_prepare_msi(struct msi_desc *desc, phys_addr_t msi_addr)
 	cookie = domain->iova_cookie;
 
 	/*
-	 * We disable IRQs to rule out a possible inversion against
-	 * irq_desc_lock if, say, someone tries to retarget the affinity
-	 * of an MSI from within an IPI handler.
+	 * In fact the whole prepare operation should already be serialised by
+	 * irq_domain_mutex further up the callchain, but that's pretty subtle
+	 * on its own, so consider this locking as failsafe documentation...
 	 */
-	spin_lock_irqsave(&cookie->msi_lock, flags);
+	mutex_lock(&msi_prepare_lock);
 	msi_page = iommu_dma_get_msi_page(dev, msi_addr, domain);
-	spin_unlock_irqrestore(&cookie->msi_lock, flags);
+	mutex_unlock(&msi_prepare_lock);
 
 	msi_desc_set_iommu_cookie(desc, msi_page);
 
-- 
2.20.1

[PATCH 5.4 108/165] io_uring: dont wait when under-submitting

[Greg Kroah-Hartman]

From: Pavel Begunkov <asml.silence@gmail.com>

[ Upstream commit 7c504e65206a4379ff38fe41d21b32b6c2c3e53e ]

There is no reliable way to submit and wait in a single syscall, as
io_submit_sqes() may under-consume sqes (in case of an early error).
Then it will wait for not-yet-submitted requests, deadlocking the user
in most cases.

Don't wait/poll if can't submit all sqes

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index a60c6315a348..709671faaed6 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -3721,6 +3721,9 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 		mutex_lock(&ctx->uring_lock);
 		submitted = io_ring_submit(ctx, to_submit);
 		mutex_unlock(&ctx->uring_lock);
+
+		if (submitted != to_submit)
+			goto out;
 	}
 	if (flags & IORING_ENTER_GETEVENTS) {
 		unsigned nr_events = 0;
@@ -3734,6 +3737,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 		}
 	}
 
+out:
 	percpu_ref_put(&ctx->refs);
 out_fput:
 	fdput(f);
-- 
2.20.1

[PATCH 5.4 109/165] clk: Move clk_core_reparent_orphans() under CONFIG_OF

[Greg Kroah-Hartman]

From: Olof Johansson <olof@lixom.net>

[ Upstream commit c771256ee7a03d3fb3c0443319ae6249c455849d ]

A recent addition exposed a helper that is only used for CONFIG_OF. Move
it into the CONFIG_OF zone in this file to make the compiler stop
warning about an unused function.

Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration")
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org
[sboyd@kernel.org: "Simply" move the function instead]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9c570bfc40d6..27a95c86a80b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3259,13 +3259,6 @@ static void clk_core_reparent_orphans_nolock(void)
 	}
 }
 
-static void clk_core_reparent_orphans(void)
-{
-	clk_prepare_lock();
-	clk_core_reparent_orphans_nolock();
-	clk_prepare_unlock();
-}
-
 /**
  * __clk_core_init - initialize the data structures in a struct clk_core
  * @core:	clk_core being initialized
@@ -4174,6 +4167,13 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 EXPORT_SYMBOL_GPL(clk_notifier_unregister);
 
 #ifdef CONFIG_OF
+static void clk_core_reparent_orphans(void)
+{
+	clk_prepare_lock();
+	clk_core_reparent_orphans_nolock();
+	clk_prepare_unlock();
+}
+
 /**
  * struct of_clk_provider - Clock provider registration structure
  * @link: Entry in global list of clock providers
-- 
2.20.1

[PATCH 5.4 110/165] net: stmmac: selftests: Needs to check the number of Multicast regs

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 08c965430869ed423921bd9058ae59f75207feb6 ]

When running the MC and UC filter tests we setup a multicast address
that its expected to be blocked. If the number of available multicast
registers is zero, driver will always pass the multicast packets which
will fail the test.

Check if available multicast addresses is enough before running the
tests.

Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index ac3f658105c0..a0513deab1a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -624,6 +624,8 @@ static int stmmac_test_mcfilt(struct stmmac_priv *priv)
 		return -EOPNOTSUPP;
 	if (netdev_uc_count(priv->dev) >= priv->hw->unicast_filter_entries)
 		return -EOPNOTSUPP;
+	if (netdev_mc_count(priv->dev) >= priv->hw->multicast_filter_bins)
+		return -EOPNOTSUPP;
 
 	while (--tries) {
 		/* We only need to check the mc_addr for collisions */
@@ -666,6 +668,8 @@ static int stmmac_test_ucfilt(struct stmmac_priv *priv)
 
 	if (stmmac_filter_check(priv))
 		return -EOPNOTSUPP;
+	if (netdev_uc_count(priv->dev) >= priv->hw->unicast_filter_entries)
+		return -EOPNOTSUPP;
 	if (netdev_mc_count(priv->dev) >= priv->hw->multicast_filter_bins)
 		return -EOPNOTSUPP;
 
-- 
2.20.1

[PATCH 5.4 111/165] net: stmmac: Determine earlier the size of RX buffer

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 5d626c879e238be9585bd59a61eb606c9408178a ]

Split Header feature needs to know the size of RX buffer but current
code is determining it too late. Fix this by moving the RX buffer
computation to earlier stage.

Changes from v2:
- Do not try to align already aligned buffer size

Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++----------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 271a00f24f45..d9520c029ae5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1292,19 +1292,9 @@ static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 rx_count = priv->plat->rx_queues_to_use;
 	int ret = -ENOMEM;
-	int bfsize = 0;
 	int queue;
 	int i;
 
-	bfsize = stmmac_set_16kib_bfsize(priv, dev->mtu);
-	if (bfsize < 0)
-		bfsize = 0;
-
-	if (bfsize < BUF_SIZE_16KiB)
-		bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
-
-	priv->dma_buf_sz = bfsize;
-
 	/* RX INITIALIZATION */
 	netif_dbg(priv, probe, priv->dev,
 		  "SKB addresses:\nskb\t\tskb data\tdma data\n");
@@ -1346,8 +1336,6 @@ static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
 		}
 	}
 
-	buf_sz = bfsize;
-
 	return 0;
 
 err_init_rx_buffers:
@@ -2654,6 +2642,7 @@ static void stmmac_hw_teardown(struct net_device *dev)
 static int stmmac_open(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	int bfsize = 0;
 	u32 chan;
 	int ret;
 
@@ -2673,7 +2662,16 @@ static int stmmac_open(struct net_device *dev)
 	memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
 	priv->xstats.threshold = tc;
 
-	priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+	bfsize = stmmac_set_16kib_bfsize(priv, dev->mtu);
+	if (bfsize < 0)
+		bfsize = 0;
+
+	if (bfsize < BUF_SIZE_16KiB)
+		bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
+
+	priv->dma_buf_sz = bfsize;
+	buf_sz = bfsize;
+
 	priv->rx_copybreak = STMMAC_RX_COPYBREAK;
 
 	ret = alloc_dma_desc_resources(priv);
-- 
2.20.1

[PATCH 5.4 112/165] net: stmmac: Do not accept invalid MTU values

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit eaf4fac478077d4ed57cbca2c044c4b58a96bd98 ]

The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.

Also check if provided and rounded MTU does not passes the maximum limit
of 16K.

Changes from v2:
- Align MTU before checking if its valid

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d9520c029ae5..1b4968e4a313 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3745,12 +3745,24 @@ static void stmmac_set_rx_mode(struct net_device *dev)
 static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	int txfifosz = priv->plat->tx_fifo_size;
+
+	if (txfifosz == 0)
+		txfifosz = priv->dma_cap.tx_fifo_size;
+
+	txfifosz /= priv->plat->tx_queues_to_use;
 
 	if (netif_running(dev)) {
 		netdev_err(priv->dev, "must be stopped to change its MTU\n");
 		return -EBUSY;
 	}
 
+	new_mtu = STMMAC_ALIGN(new_mtu);
+
+	/* If condition true, FIFO is too small or MTU too large */
+	if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
+		return -EINVAL;
+
 	dev->mtu = new_mtu;
 
 	netdev_update_features(dev);
-- 
2.20.1

[PATCH 5.4 113/165] net: stmmac: xgmac: Clear previous RX buffer size

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 11d55fd9975f8e46a0e5e19c14899544e81e1e15 ]

When switching between buffer sizes we need to clear the previous value.

Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     | 2 ++
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 3 ++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 9d08a934fe4f..ff751ab3d765 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -343,6 +343,8 @@
 #define XGMAC_DMA_CH_RX_CONTROL(x)	(0x00003108 + (0x80 * (x)))
 #define XGMAC_RxPBL			GENMASK(21, 16)
 #define XGMAC_RxPBL_SHIFT		16
+#define XGMAC_RBSZ			GENMASK(14, 1)
+#define XGMAC_RBSZ_SHIFT		1
 #define XGMAC_RXST			BIT(0)
 #define XGMAC_DMA_CH_TxDESC_HADDR(x)	(0x00003110 + (0x80 * (x)))
 #define XGMAC_DMA_CH_TxDESC_LADDR(x)	(0x00003114 + (0x80 * (x)))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index f70ca5300b82..4af7271cea56 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -489,7 +489,8 @@ static void dwxgmac2_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan)
 	u32 value;
 
 	value = readl(ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
-	value |= bfsize << 1;
+	value &= ~XGMAC_RBSZ;
+	value |= bfsize << XGMAC_RBSZ_SHIFT;
 	writel(value, ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
 }
 
-- 
2.20.1

[PATCH 5.4 114/165] net: stmmac: RX buffer size must be 16 byte aligned

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 8d558f0294fe92e04af192e221d0d0f6a180ee7b ]

We need to align the RX buffer size to at least 16 byte so that IP
doesn't mis-behave. This is required by HW.

Changes from v2:
- Align UP and not DOWN (David)

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1b4968e4a313..cfb60b20e625 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -45,7 +45,7 @@
 #include "dwxgmac2.h"
 #include "hwif.h"
 
-#define	STMMAC_ALIGN(x)		__ALIGN_KERNEL(x, SMP_CACHE_BYTES)
+#define	STMMAC_ALIGN(x)		ALIGN(ALIGN(x, SMP_CACHE_BYTES), 16)
 #define	TSO_MAX_BUFF_SIZE	(SZ_16K - 1)
 
 /* Module parameters */
-- 
2.20.1

[PATCH 5.4 115/165] net: stmmac: Always arm TX Timer at end of transmission start

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 4772f26db8d1fb568c4862c538344a1b5fb52081 ]

If TX Coalesce timer is enabled we should always arm it, otherwise we
may hit the case where an interrupt is missed and the TX Queue will
timeout.

Arming the timer does not necessarly mean it will run the tx_clean()
because this function is wrapped around NAPI launcher.

Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index cfb60b20e625..903c5d8a226e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3101,6 +3101,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc));
 	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+	stmmac_tx_timer_arm(priv, queue);
 
 	return NETDEV_TX_OK;
 
@@ -3328,6 +3329,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc));
 	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+	stmmac_tx_timer_arm(priv, queue);
 
 	return NETDEV_TX_OK;
 
-- 
2.20.1

[PATCH 5.4 116/165] s390/purgatory: do not build purgatory with kcov, kasan and friends

[Greg Kroah-Hartman]

From: Christian Borntraeger <borntraeger@de.ibm.com>

[ Upstream commit c23587c92f6e3260fe3b82bb75b38aa2553b9468 ]

the purgatory must not rely on functions from the "old" kernel,
so we must disable kasan and friends. We also need to have a
separate copy of string.c as the default does not build memcmp
with KASAN.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/purgatory/Makefile | 6 ++++--
 arch/s390/purgatory/string.c | 3 +++
 2 files changed, 7 insertions(+), 2 deletions(-)
 create mode 100644 arch/s390/purgatory/string.c

diff --git a/arch/s390/purgatory/Makefile b/arch/s390/purgatory/Makefile
index bc0d7a0d0394..9de56065f28c 100644
--- a/arch/s390/purgatory/Makefile
+++ b/arch/s390/purgatory/Makefile
@@ -15,8 +15,10 @@ CFLAGS_sha256.o := -D__DISABLE_EXPORTS
 $(obj)/mem.o: $(srctree)/arch/s390/lib/mem.S FORCE
 	$(call if_changed_rule,as_o_S)
 
-$(obj)/string.o: $(srctree)/arch/s390/lib/string.c FORCE
-	$(call if_changed_rule,cc_o_c)
+KCOV_INSTRUMENT := n
+GCOV_PROFILE := n
+UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
 
 KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes
 KBUILD_CFLAGS += -Wno-pointer-sign -Wno-sign-compare
diff --git a/arch/s390/purgatory/string.c b/arch/s390/purgatory/string.c
new file mode 100644
index 000000000000..c98c22a72db7
--- /dev/null
+++ b/arch/s390/purgatory/string.c
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0
+#define __HAVE_ARCH_MEMCMP	/* arch function */
+#include "../lib/string.c"
-- 
2.20.1

[PATCH 5.4 117/165] drm/exynos: gsc: add missed component_del

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 84c92365b20a44c363b95390ea00dfbdd786f031 ]

The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_gsc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
index 7ae087b0504d..88b6fcaa20be 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
@@ -1313,6 +1313,7 @@ static int gsc_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 
+	component_del(dev, &gsc_component_ops);
 	pm_runtime_dont_use_autosuspend(dev);
 	pm_runtime_disable(dev);
 
-- 
2.20.1

[PATCH 5.4 118/165] tpm/tpm_ftpm_tee: add shutdown call back

[Greg Kroah-Hartman]

From: Pavel Tatashin <pasha.tatashin@soleen.com>

[ Upstream commit 1760eb689ed68c6746744aff2092bff57c78d907 ]

Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.

Add parentheses to function names in comments as specified in kdoc.

Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tpm/tpm_ftpm_tee.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
index 6640a14dbe48..22bf553ccf9d 100644
--- a/drivers/char/tpm/tpm_ftpm_tee.c
+++ b/drivers/char/tpm/tpm_ftpm_tee.c
@@ -32,7 +32,7 @@ static const uuid_t ftpm_ta_uuid =
 		  0x82, 0xCB, 0x34, 0x3F, 0xB7, 0xF3, 0x78, 0x96);
 
 /**
- * ftpm_tee_tpm_op_recv - retrieve fTPM response.
+ * ftpm_tee_tpm_op_recv() - retrieve fTPM response.
  * @chip:	the tpm_chip description as specified in driver/char/tpm/tpm.h.
  * @buf:	the buffer to store data.
  * @count:	the number of bytes to read.
@@ -61,7 +61,7 @@ static int ftpm_tee_tpm_op_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 }
 
 /**
- * ftpm_tee_tpm_op_send - send TPM commands through the TEE shared memory.
+ * ftpm_tee_tpm_op_send() - send TPM commands through the TEE shared memory.
  * @chip:	the tpm_chip description as specified in driver/char/tpm/tpm.h
  * @buf:	the buffer to send.
  * @len:	the number of bytes to send.
@@ -208,7 +208,7 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
 }
 
 /**
- * ftpm_tee_probe - initialize the fTPM
+ * ftpm_tee_probe() - initialize the fTPM
  * @pdev: the platform_device description.
  *
  * Return:
@@ -298,7 +298,7 @@ static int ftpm_tee_probe(struct platform_device *pdev)
 }
 
 /**
- * ftpm_tee_remove - remove the TPM device
+ * ftpm_tee_remove() - remove the TPM device
  * @pdev: the platform_device description.
  *
  * Return:
@@ -328,6 +328,19 @@ static int ftpm_tee_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/**
+ * ftpm_tee_shutdown() - shutdown the TPM device
+ * @pdev: the platform_device description.
+ */
+static void ftpm_tee_shutdown(struct platform_device *pdev)
+{
+	struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
+
+	tee_shm_free(pvt_data->shm);
+	tee_client_close_session(pvt_data->ctx, pvt_data->session);
+	tee_client_close_context(pvt_data->ctx);
+}
+
 static const struct of_device_id of_ftpm_tee_ids[] = {
 	{ .compatible = "microsoft,ftpm" },
 	{ }
@@ -341,6 +354,7 @@ static struct platform_driver ftpm_tee_driver = {
 	},
 	.probe = ftpm_tee_probe,
 	.remove = ftpm_tee_remove,
+	.shutdown = ftpm_tee_shutdown,
 };
 
 module_platform_driver(ftpm_tee_driver);
-- 
2.20.1

[PATCH 5.4 119/165] xsk: Add rcu_read_lock around the XSK wakeup

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit 06870682087b58398671e8cdc896cd62314c4399 ]

The XSK wakeup callback in drivers makes some sanity checks before
triggering NAPI. However, some configuration changes may occur during
this function that affect the result of those checks. For example, the
interface can go down, and all the resources will be destroyed after the
checks in the wakeup function, but before it attempts to use these
resources. Wrap this callback in rcu_read_lock to allow driver to
synchronize_rcu before actually destroying the resources.

xsk_wakeup is a new function that encapsulates calling ndo_xsk_wakeup
wrapped into the RCU lock. After this commit, xsk_poll starts using
xsk_wakeup and checks xs->zc instead of ndo_xsk_wakeup != NULL to decide
ndo_xsk_wakeup should be called. It also fixes a bug introduced with the
need_wakeup feature: a non-zero-copy socket may be used with a driver
supporting zero-copy, and in this case ndo_xsk_wakeup should not be
called, so the xs->zc check is the correct one.

Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-2-maximmi@mellanox.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xsk.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 9044073fbf22..d426fc01c529 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -305,12 +305,21 @@ bool xsk_umem_consume_tx(struct xdp_umem *umem, struct xdp_desc *desc)
 }
 EXPORT_SYMBOL(xsk_umem_consume_tx);
 
-static int xsk_zc_xmit(struct xdp_sock *xs)
+static int xsk_wakeup(struct xdp_sock *xs, u8 flags)
 {
 	struct net_device *dev = xs->dev;
+	int err;
+
+	rcu_read_lock();
+	err = dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id, flags);
+	rcu_read_unlock();
+
+	return err;
+}
 
-	return dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id,
-					       XDP_WAKEUP_TX);
+static int xsk_zc_xmit(struct xdp_sock *xs)
+{
+	return xsk_wakeup(xs, XDP_WAKEUP_TX);
 }
 
 static void xsk_destruct_skb(struct sk_buff *skb)
@@ -424,19 +433,16 @@ static unsigned int xsk_poll(struct file *file, struct socket *sock,
 	unsigned int mask = datagram_poll(file, sock, wait);
 	struct sock *sk = sock->sk;
 	struct xdp_sock *xs = xdp_sk(sk);
-	struct net_device *dev;
 	struct xdp_umem *umem;
 
 	if (unlikely(!xsk_is_bound(xs)))
 		return mask;
 
-	dev = xs->dev;
 	umem = xs->umem;
 
 	if (umem->need_wakeup) {
-		if (dev->netdev_ops->ndo_xsk_wakeup)
-			dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id,
-							umem->need_wakeup);
+		if (xs->zc)
+			xsk_wakeup(xs, umem->need_wakeup);
 		else
 			/* Poll needs to drive Tx also in copy mode */
 			__xsk_sendmsg(sk);
-- 
2.20.1

[PATCH 5.4 120/165] net/mlx5e: Fix concurrency issues between config flow and XSK

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit 9cf88808ad6a0f1e958e00abd9a081295fe6da0c ]

After disabling resources necessary for XSK (the XDP program, channels,
XSK queues), use synchronize_rcu to wait until the XSK wakeup function
finishes, before freeing the resources.

Suspend XSK wakeups during switching channels. If the XDP program is
being removed, synchronize_rcu before closing the old channels to allow
XSK wakeup to complete.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h  |  2 +-
 .../net/ethernet/mellanox/mlx5/core/en/xdp.h  | 22 ++++++++-----------
 .../mellanox/mlx5/core/en/xsk/setup.c         |  1 +
 .../ethernet/mellanox/mlx5/core/en/xsk/tx.c   |  2 +-
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 19 +---------------
 5 files changed, 13 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 2c16add0b642..9c8427698238 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -760,7 +760,7 @@ enum {
 	MLX5E_STATE_OPENED,
 	MLX5E_STATE_DESTROYING,
 	MLX5E_STATE_XDP_TX_ENABLED,
-	MLX5E_STATE_XDP_OPEN,
+	MLX5E_STATE_XDP_ACTIVE,
 };
 
 struct mlx5e_rqt {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
index 36ac1e3816b9..d7587f40ecae 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
@@ -75,12 +75,18 @@ int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
 static inline void mlx5e_xdp_tx_enable(struct mlx5e_priv *priv)
 {
 	set_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
+
+	if (priv->channels.params.xdp_prog)
+		set_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state);
 }
 
 static inline void mlx5e_xdp_tx_disable(struct mlx5e_priv *priv)
 {
+	if (priv->channels.params.xdp_prog)
+		clear_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state);
+
 	clear_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
-	/* let other device's napi(s) see our new state */
+	/* Let other device's napi(s) and XSK wakeups see our new state. */
 	synchronize_rcu();
 }
 
@@ -89,19 +95,9 @@ static inline bool mlx5e_xdp_tx_is_enabled(struct mlx5e_priv *priv)
 	return test_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
 }
 
-static inline void mlx5e_xdp_set_open(struct mlx5e_priv *priv)
-{
-	set_bit(MLX5E_STATE_XDP_OPEN, &priv->state);
-}
-
-static inline void mlx5e_xdp_set_closed(struct mlx5e_priv *priv)
-{
-	clear_bit(MLX5E_STATE_XDP_OPEN, &priv->state);
-}
-
-static inline bool mlx5e_xdp_is_open(struct mlx5e_priv *priv)
+static inline bool mlx5e_xdp_is_active(struct mlx5e_priv *priv)
 {
-	return test_bit(MLX5E_STATE_XDP_OPEN, &priv->state);
+	return test_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state);
 }
 
 static inline void mlx5e_xmit_xdp_doorbell(struct mlx5e_xdpsq *sq)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
index 631af8dee517..c28cbae42331 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c
@@ -144,6 +144,7 @@ void mlx5e_close_xsk(struct mlx5e_channel *c)
 {
 	clear_bit(MLX5E_CHANNEL_STATE_XSK, c->state);
 	napi_synchronize(&c->napi);
+	synchronize_rcu(); /* Sync with the XSK wakeup. */
 
 	mlx5e_close_rq(&c->xskrq);
 	mlx5e_close_cq(&c->xskrq.cq);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
index 87827477d38c..fe2d596cb361 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
@@ -14,7 +14,7 @@ int mlx5e_xsk_wakeup(struct net_device *dev, u32 qid, u32 flags)
 	struct mlx5e_channel *c;
 	u16 ix;
 
-	if (unlikely(!mlx5e_xdp_is_open(priv)))
+	if (unlikely(!mlx5e_xdp_is_active(priv)))
 		return -ENETDOWN;
 
 	if (unlikely(!mlx5e_qid_get_ch_if_in_group(params, qid, MLX5E_RQ_GROUP_XSK, &ix)))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 6abd4ed5b69b..29a5a8c894e3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3002,12 +3002,9 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
 int mlx5e_open_locked(struct net_device *netdev)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
-	bool is_xdp = priv->channels.params.xdp_prog;
 	int err;
 
 	set_bit(MLX5E_STATE_OPENED, &priv->state);
-	if (is_xdp)
-		mlx5e_xdp_set_open(priv);
 
 	err = mlx5e_open_channels(priv, &priv->channels);
 	if (err)
@@ -3022,8 +3019,6 @@ int mlx5e_open_locked(struct net_device *netdev)
 	return 0;
 
 err_clear_state_opened_flag:
-	if (is_xdp)
-		mlx5e_xdp_set_closed(priv);
 	clear_bit(MLX5E_STATE_OPENED, &priv->state);
 	return err;
 }
@@ -3055,8 +3050,6 @@ int mlx5e_close_locked(struct net_device *netdev)
 	if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
 		return 0;
 
-	if (priv->channels.params.xdp_prog)
-		mlx5e_xdp_set_closed(priv);
 	clear_bit(MLX5E_STATE_OPENED, &priv->state);
 
 	netif_carrier_off(priv->netdev);
@@ -4373,16 +4366,6 @@ static int mlx5e_xdp_allowed(struct mlx5e_priv *priv, struct bpf_prog *prog)
 	return 0;
 }
 
-static int mlx5e_xdp_update_state(struct mlx5e_priv *priv)
-{
-	if (priv->channels.params.xdp_prog)
-		mlx5e_xdp_set_open(priv);
-	else
-		mlx5e_xdp_set_closed(priv);
-
-	return 0;
-}
-
 static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
@@ -4422,7 +4405,7 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 		mlx5e_set_rq_type(priv->mdev, &new_channels.params);
 		old_prog = priv->channels.params.xdp_prog;
 
-		err = mlx5e_safe_switch_channels(priv, &new_channels, mlx5e_xdp_update_state);
+		err = mlx5e_safe_switch_channels(priv, &new_channels, NULL);
 		if (err)
 			goto unlock;
 	} else {
-- 
2.20.1

[PATCH 5.4 121/165] net/i40e: Fix concurrency issues between config flow and XSK

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit b3873a5be757b44d51af542a50a6f2a3b6f95284 ]

Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:

1. i40e_down already calls synchronize_rcu. On i40e_down either
__I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in
i40e_xsk_wakeup (the former is already checked there).

2. After switching the XDP program, call synchronize_rcu to let
i40e_xsk_wakeup exit before the XDP program is freed.

3. Changing the number of channels brings the interface down (see
i40e_prep_for_reset and i40e_pf_quiesce_all_vsi).

4. Disabling UMEM sets __I40E_CONFIG_BUSY, too.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++++---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c  |  4 ++++
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 2af9f6308f84..401304d4d553 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -1151,7 +1151,7 @@ void i40e_set_fec_in_flags(u8 fec_cfg, u32 *flags);
 
 static inline bool i40e_enabled_xdp_vsi(struct i40e_vsi *vsi)
 {
-	return !!vsi->xdp_prog;
+	return !!READ_ONCE(vsi->xdp_prog);
 }
 
 int i40e_create_queue_channel(struct i40e_vsi *vsi, struct i40e_channel *ch);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 339925af0206..4960c9c3e773 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6804,8 +6804,8 @@ void i40e_down(struct i40e_vsi *vsi)
 	for (i = 0; i < vsi->num_queue_pairs; i++) {
 		i40e_clean_tx_ring(vsi->tx_rings[i]);
 		if (i40e_enabled_xdp_vsi(vsi)) {
-			/* Make sure that in-progress ndo_xdp_xmit
-			 * calls are completed.
+			/* Make sure that in-progress ndo_xdp_xmit and
+			 * ndo_xsk_wakeup calls are completed.
 			 */
 			synchronize_rcu();
 			i40e_clean_tx_ring(vsi->xdp_rings[i]);
@@ -12526,8 +12526,12 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi,
 
 	old_prog = xchg(&vsi->xdp_prog, prog);
 
-	if (need_reset)
+	if (need_reset) {
+		if (!prog)
+			/* Wait until ndo_xsk_wakeup completes. */
+			synchronize_rcu();
 		i40e_reset_and_rebuild(pf, true, true);
+	}
 
 	for (i = 0; i < vsi->num_queue_pairs; i++)
 		WRITE_ONCE(vsi->rx_rings[i]->xdp_prog, vsi->xdp_prog);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index d07e1a890428..f73cd917c44f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -787,8 +787,12 @@ int i40e_xsk_wakeup(struct net_device *dev, u32 queue_id, u32 flags)
 {
 	struct i40e_netdev_priv *np = netdev_priv(dev);
 	struct i40e_vsi *vsi = np->vsi;
+	struct i40e_pf *pf = vsi->back;
 	struct i40e_ring *ring;
 
+	if (test_bit(__I40E_CONFIG_BUSY, pf->state))
+		return -ENETDOWN;
+
 	if (test_bit(__I40E_VSI_DOWN, vsi->state))
 		return -ENETDOWN;
 
-- 
2.20.1

[PATCH 5.4 122/165] net/ixgbe: Fix concurrency issues between config flow and XSK

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit c0fdccfd226a1424683d3000d9e08384391210a2 ]

Use synchronize_rcu to wait until the XSK wakeup function finishes
before destroying the resources it uses:

1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN.

2. After switching the XDP program, call synchronize_rcu to let
ixgbe_xsk_wakeup exit before the XDP program is freed.

3. Changing the number of channels brings the interface down.

4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware
resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to
avoid using the XDP ring when it's already destroyed. synchronize_rcu is
called from ixgbe_txrx_ring_disable.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 7 ++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c  | 8 ++++++--
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1a7203fede12..c6404abf2dd1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -10248,7 +10248,12 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog)
 
 	/* If transitioning XDP modes reconfigure rings */
 	if (need_reset) {
-		int err = ixgbe_setup_tc(dev, adapter->hw_tcs);
+		int err;
+
+		if (!prog)
+			/* Wait until ndo_xsk_wakeup completes. */
+			synchronize_rcu();
+		err = ixgbe_setup_tc(dev, adapter->hw_tcs);
 
 		if (err) {
 			rcu_assign_pointer(adapter->xdp_prog, old_prog);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
index d6feaacfbf89..b43be9f14105 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -709,10 +709,14 @@ int ixgbe_xsk_wakeup(struct net_device *dev, u32 qid, u32 flags)
 	if (qid >= adapter->num_xdp_queues)
 		return -ENXIO;
 
-	if (!adapter->xdp_ring[qid]->xsk_umem)
+	ring = adapter->xdp_ring[qid];
+
+	if (test_bit(__IXGBE_TX_DISABLED, &ring->state))
+		return -ENETDOWN;
+
+	if (!ring->xsk_umem)
 		return -ENXIO;
 
-	ring = adapter->xdp_ring[qid];
 	if (!napi_if_scheduled_mark_missed(&ring->q_vector->napi)) {
 		u64 eics = BIT_ULL(ring->q_vector->v_idx);
 
-- 
2.20.1

[PATCH 5.4 123/165] platform/x86: pcengines-apuv2: fix simswap GPIO assignment

[Greg Kroah-Hartman]

From: Enrico Weigelt, metux IT consult <info@metux.net>

[ Upstream commit d4ac8f83dafec205c5db9b86b21587fba43bc017 ]

The mapping entry has to hold the GPIO line index instead of
controller's register number.

Fixes: 5037d4ddda31 ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/pcengines-apuv2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
index 48b112b4f0b0..c32daf087640 100644
--- a/drivers/platform/x86/pcengines-apuv2.c
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -95,7 +95,7 @@ static struct gpiod_lookup_table gpios_led_table = {
 				NULL, 1, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
 				NULL, 2, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_REG_SIMSWAP,
+		GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_SIMSWAP,
 				NULL, 3, GPIO_ACTIVE_LOW),
 	}
 };
-- 
2.20.1

[PATCH 5.4 124/165] arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list

[Greg Kroah-Hartman]

From: Wei Li <liwei391@huawei.com>

[ Upstream commit aa638cfe3e7358122a15cb1d295b622aae69e006 ]

HiSilicon Taishan v110 CPUs didn't implement CSV2 field of the
ID_AA64PFR0_EL1, but spectre-v2 is mitigated by hardware, so
whitelist the MIDR in the safe list.

Signed-off-by: Wei Li <liwei391@huawei.com>
[hanjun: re-write the commit log]
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cpu_errata.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 93f34b4eca25..96f576e9ea46 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -575,6 +575,7 @@ static const struct midr_range spectre_v2_safe_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 	MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+	MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
 	{ /* sentinel */ }
 };
 
-- 
2.20.1

[PATCH 5.4 125/165] block: Fix a lockdep complaint triggered by request queue flushing

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit b3c6a59975415bde29cfd76ff1ab008edbf614a9 ]

Avoid that running test nvme/012 from the blktests suite triggers the
following false positive lockdep complaint:

============================================
WARNING: possible recursive locking detected
5.0.0-rc3-xfstests-00015-g1236f7d60242 #841 Not tainted
--------------------------------------------
ksoftirqd/1/16 is trying to acquire lock:
000000000282032e (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

but task is already holding lock:
00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&fq->mq_flush_lock)->rlock);
  lock(&(&fq->mq_flush_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

1 lock held by ksoftirqd/1/16:
 #0: 00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3-xfstests-00015-g1236f7d60242 #841
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 dump_stack+0x67/0x90
 __lock_acquire.cold.45+0x2b4/0x313
 lock_acquire+0x98/0x160
 _raw_spin_lock_irqsave+0x3b/0x80
 flush_end_io+0x4e/0x1d0
 blk_mq_complete_request+0x76/0x110
 nvmet_req_complete+0x15/0x110 [nvmet]
 nvmet_bio_done+0x27/0x50 [nvmet]
 blk_update_request+0xd7/0x2d0
 blk_mq_end_request+0x1a/0x100
 blk_flush_complete_seq+0xe5/0x350
 flush_end_io+0x12f/0x1d0
 blk_done_softirq+0x9f/0xd0
 __do_softirq+0xca/0x440
 run_ksoftirqd+0x24/0x50
 smpboot_thread_fn+0x113/0x1e0
 kthread+0x121/0x140
 ret_from_fork+0x3a/0x50

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-flush.c | 5 +++++
 block/blk.h       | 1 +
 2 files changed, 6 insertions(+)

diff --git a/block/blk-flush.c b/block/blk-flush.c
index 1eec9cbe5a0a..b1f0a1ac505c 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -69,6 +69,7 @@
 #include <linux/blkdev.h>
 #include <linux/gfp.h>
 #include <linux/blk-mq.h>
+#include <linux/lockdep.h>
 
 #include "blk.h"
 #include "blk-mq.h"
@@ -492,6 +493,9 @@ struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
 	INIT_LIST_HEAD(&fq->flush_queue[1]);
 	INIT_LIST_HEAD(&fq->flush_data_in_flight);
 
+	lockdep_register_key(&fq->key);
+	lockdep_set_class(&fq->mq_flush_lock, &fq->key);
+
 	return fq;
 
  fail_rq:
@@ -506,6 +510,7 @@ void blk_free_flush_queue(struct blk_flush_queue *fq)
 	if (!fq)
 		return;
 
+	lockdep_unregister_key(&fq->key);
 	kfree(fq->flush_rq);
 	kfree(fq);
 }
diff --git a/block/blk.h b/block/blk.h
index 47fba9362e60..ffea1691470e 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -30,6 +30,7 @@ struct blk_flush_queue {
 	 * at the same time
 	 */
 	struct request		*orig_rq;
+	struct lock_class_key	key;
 	spinlock_t		mq_flush_lock;
 };
 
-- 
2.20.1

[PATCH 5.4 126/165] s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly

[Greg Kroah-Hartman]

From: Jan Höppner <hoeppner@linux.ibm.com>

[ Upstream commit dd4b3c83b9efac10d48a94c61372119fc555a077 ]

The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.

Though, the comment for this function describes a negative return value
to indicate failures.

As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.

To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.

This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd_eckd.c | 9 +++++----
 drivers/s390/cio/device_ops.c  | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index c94184d080f8..f5622f4a2ecf 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1128,7 +1128,8 @@ static u32 get_fcx_max_data(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private = device->private;
 	int fcx_in_css, fcx_in_gneq, fcx_in_features;
-	int tpm, mdc;
+	unsigned int mdc;
+	int tpm;
 
 	if (dasd_nofcx)
 		return 0;
@@ -1142,7 +1143,7 @@ static u32 get_fcx_max_data(struct dasd_device *device)
 		return 0;
 
 	mdc = ccw_device_get_mdc(device->cdev, 0);
-	if (mdc < 0) {
+	if (mdc == 0) {
 		dev_warn(&device->cdev->dev, "Detecting the maximum supported data size for zHPF requests failed\n");
 		return 0;
 	} else {
@@ -1153,12 +1154,12 @@ static u32 get_fcx_max_data(struct dasd_device *device)
 static int verify_fcx_max_data(struct dasd_device *device, __u8 lpm)
 {
 	struct dasd_eckd_private *private = device->private;
-	int mdc;
+	unsigned int mdc;
 	u32 fcx_max_data;
 
 	if (private->fcx_max_data) {
 		mdc = ccw_device_get_mdc(device->cdev, lpm);
-		if ((mdc < 0)) {
+		if (mdc == 0) {
 			dev_warn(&device->cdev->dev,
 				 "Detecting the maximum data size for zHPF "
 				 "requests failed (rc=%d) for a new path %x\n",
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 65841af15748..ccecf6b9504e 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -635,7 +635,7 @@ EXPORT_SYMBOL(ccw_device_tm_start_timeout);
  * @mask: mask of paths to use
  *
  * Return the number of 64K-bytes blocks all paths at least support
- * for a transport command. Return values <= 0 indicate failures.
+ * for a transport command. Return value 0 indicates failure.
  */
 int ccw_device_get_mdc(struct ccw_device *cdev, u8 mask)
 {
-- 
2.20.1

[PATCH 5.4 127/165] s390/dasd: fix memleak in path handling error case

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

[ Upstream commit 00b39f698a4f1ee897227cace2e3937fc4412270 ]

If for whatever reason the dasd_eckd_check_characteristics() function
exits after at least some paths have their configuration data
allocated those data is never freed again. In the error case the
device->private pointer is set to NULL and dasd_eckd_uncheck_device()
will exit without freeing the path data because of this NULL pointer.

Fix by calling dasd_eckd_clear_conf_data() for error cases.

Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device()
to avoid code duplication.

Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd_eckd.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index f5622f4a2ecf..a28b9ff82378 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2074,7 +2074,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	dasd_free_block(device->block);
 	device->block = NULL;
 out_err1:
-	kfree(private->conf_data);
+	dasd_eckd_clear_conf_data(device);
 	kfree(device->private);
 	device->private = NULL;
 	return rc;
@@ -2083,7 +2083,6 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 static void dasd_eckd_uncheck_device(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private = device->private;
-	int i;
 
 	if (!private)
 		return;
@@ -2093,21 +2092,7 @@ static void dasd_eckd_uncheck_device(struct dasd_device *device)
 	private->sneq = NULL;
 	private->vdsneq = NULL;
 	private->gneq = NULL;
-	private->conf_len = 0;
-	for (i = 0; i < 8; i++) {
-		kfree(device->path[i].conf_data);
-		if ((__u8 *)device->path[i].conf_data ==
-		    private->conf_data) {
-			private->conf_data = NULL;
-			private->conf_len = 0;
-		}
-		device->path[i].conf_data = NULL;
-		device->path[i].cssid = 0;
-		device->path[i].ssid = 0;
-		device->path[i].chpid = 0;
-	}
-	kfree(private->conf_data);
-	private->conf_data = NULL;
+	dasd_eckd_clear_conf_data(device);
 }
 
 static struct dasd_ccw_req *
-- 
2.20.1

[PATCH 5.4 128/165] block: fix memleak when __blk_rq_map_user_iov() is failed

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 3b7995a98ad76da5597b488fa84aa5a56d43b608 ]

When I doing fuzzy test, get the memleak report:

BUG: memory leak
unreferenced object 0xffff88837af80000 (size 4096):
  comm "memleak", pid 3557, jiffies 4294817681 (age 112.499s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00   ...............
  backtrace:
    [<000000001c894df8>] bio_alloc_bioset+0x393/0x590
    [<000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0
    [<00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0
    [<000000005ceb7f05>] blk_rq_map_user+0xf2/0x160
    [<000000006454da92>] sg_common_write.isra.21+0x1094/0x1870
    [<00000000064bb208>] sg_write.part.25+0x5d9/0x950
    [<000000004fc670f6>] sg_write+0x5f/0x8c
    [<00000000b0d05c7b>] __vfs_write+0x7c/0x100
    [<000000008e177714>] vfs_write+0x1c3/0x500
    [<0000000087d23f34>] ksys_write+0xf9/0x200
    [<000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0
    [<00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(),
the bio(s) which is allocated before this failing will leak. The
refcount of the bio(s) is init to 1 and increased to 2 by calling
bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so
the bio cannot be freed. Fix it by calling blk_rq_unmap_user().

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index 3a62e471d81b..b0790268ed9d 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -151,7 +151,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 	return 0;
 
 unmap_rq:
-	__blk_rq_unmap_user(bio);
+	blk_rq_unmap_user(bio);
 fail:
 	rq->bio = NULL;
 	return ret;
-- 
2.20.1

[PATCH 5.4 129/165] parisc: Fix compiler warnings in debug_core.c

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 75cf9797006a3a9f29a3a25c1febd6842a4a9eb2 ]

Fix this compiler warning:
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value]
   48 |  ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’
   78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
      |                              ^~~~
kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’
  596 |    atomic_xchg(&kgdb_active, cpu);
      |    ^~~~~~~~~~~

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/include/asm/cmpxchg.h | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/parisc/include/asm/cmpxchg.h b/arch/parisc/include/asm/cmpxchg.h
index f627c37dad9c..ab5c215cf46c 100644
--- a/arch/parisc/include/asm/cmpxchg.h
+++ b/arch/parisc/include/asm/cmpxchg.h
@@ -44,8 +44,14 @@ __xchg(unsigned long x, __volatile__ void *ptr, int size)
 **		if (((unsigned long)p & 0xf) == 0)
 **			return __ldcw(p);
 */
-#define xchg(ptr, x) \
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x)							\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	__ret = (__typeof__(*(ptr)))					\
+		__xchg((unsigned long)_x_, (ptr), sizeof(*(ptr)));	\
+	__ret;								\
+})
 
 /* bug catcher for when unsupported size is used - won't link */
 extern void __cmpxchg_called_with_bad_pointer(void);
-- 
2.20.1

[PATCH 5.4 130/165] sbitmap: only queue kybers wait callback if not already active

[Greg Kroah-Hartman]

From: David Jeffery <djeffery@redhat.com>

[ Upstream commit df034c93f15ee71df231ff9fe311d27ff08a2a52 ]

Under heavy loads where the kyber I/O scheduler hits the token limits for
its scheduling domains, kyber can become stuck.  When active requests
complete, kyber may not be woken up leaving the I/O requests in kyber
stuck.

This stuck state is due to a race condition with kyber and the sbitmap
functions it uses to run a callback when enough requests have completed.
The running of a sbt_wait callback can race with the attempt to insert the
sbt_wait.  Since sbitmap_del_wait_queue removes the sbt_wait from the list
first then sets the sbq field to NULL, kyber can see the item as not on a
list but the call to sbitmap_add_wait_queue will see sbq as non-NULL. This
results in the sbt_wait being inserted onto the wait list but ws_active
doesn't get incremented.  So the sbitmap queue does not know there is a
waiter on a wait list.

Since sbitmap doesn't think there is a waiter, kyber may never be
informed that there are domain tokens available and the I/O never advances.
With the sbt_wait on a wait list, kyber believes it has an active waiter
so cannot insert a new waiter when reaching the domain's full state.

This race can be fixed by only adding the sbt_wait to the queue if the
sbq field is NULL.  If sbq is not NULL, there is already an action active
which will trigger the re-running of kyber.  Let it run and add the
sbt_wait to the wait list if still needing to wait.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reported-by: John Pittman <jpittman@redhat.com>
Tested-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/sbitmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/sbitmap.c b/lib/sbitmap.c
index 969e5400a615..ee3ce1494568 100644
--- a/lib/sbitmap.c
+++ b/lib/sbitmap.c
@@ -667,8 +667,8 @@ void sbitmap_add_wait_queue(struct sbitmap_queue *sbq,
 	if (!sbq_wait->sbq) {
 		sbq_wait->sbq = sbq;
 		atomic_inc(&sbq->ws_active);
+		add_wait_queue(&ws->wait, &sbq_wait->wait);
 	}
-	add_wait_queue(&ws->wait, &sbq_wait->wait);
 }
 EXPORT_SYMBOL_GPL(sbitmap_add_wait_queue);
 
-- 
2.20.1

[PATCH 5.4 131/165] s390/qeth: handle error due to unsupported transport mode

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 2e3d7fa5d29b7ab649fdf8f9533ae0c0888a7fac ]

Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.

On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 14 +++++++-------
 drivers/s390/net/qeth_core_mpc.h  |  5 +++++
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 83794d7494d4..9df47421d69c 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -653,17 +653,17 @@ static int qeth_check_idx_response(struct qeth_card *card,
 	unsigned char *buffer)
 {
 	QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN);
-	if ((buffer[2] & 0xc0) == 0xc0) {
+	if ((buffer[2] & QETH_IDX_TERMINATE_MASK) == QETH_IDX_TERMINATE) {
 		QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n",
 				 buffer[4]);
 		QETH_CARD_TEXT(card, 2, "ckidxres");
 		QETH_CARD_TEXT(card, 2, " idxterm");
-		QETH_CARD_TEXT_(card, 2, "  rc%d", -EIO);
-		if (buffer[4] == 0xf6) {
+		QETH_CARD_TEXT_(card, 2, "rc%x", buffer[4]);
+		if (buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT ||
+		    buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT_VM) {
 			dev_err(&card->gdev->dev,
-			"The qeth device is not configured "
-			"for the OSI layer required by z/VM\n");
-			return -EPERM;
+				"The device does not support the configured transport mode\n");
+			return -EPROTONOSUPPORT;
 		}
 		return -EIO;
 	}
@@ -740,10 +740,10 @@ static void qeth_issue_next_read_cb(struct qeth_card *card,
 	case 0:
 		break;
 	case -EIO:
-		qeth_clear_ipacmd_list(card);
 		qeth_schedule_recovery(card);
 		/* fall through */
 	default:
+		qeth_clear_ipacmd_list(card);
 		goto out;
 	}
 
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 6420b58cf42b..b7c17b5c823b 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -912,6 +912,11 @@ extern unsigned char IDX_ACTIVATE_WRITE[];
 #define QETH_IDX_ACT_ERR_AUTH		0x1E
 #define QETH_IDX_ACT_ERR_AUTH_USER	0x20
 
+#define QETH_IDX_TERMINATE		0xc0
+#define QETH_IDX_TERMINATE_MASK		0xc0
+#define QETH_IDX_TERM_BAD_TRANSPORT	0x41
+#define QETH_IDX_TERM_BAD_TRANSPORT_VM	0xf6
+
 #define PDU_ENCAPSULATION(buffer) \
 	(buffer + *(buffer + (*(buffer + 0x0b)) + \
 	 *(buffer + *(buffer + 0x0b) + 0x11) + 0x07))
-- 
2.20.1

[PATCH 5.4 132/165] s390/qeth: fix promiscuous mode after reset

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 0f399305cd31e5c813086eaa264f7f47e205c10e ]

When managing the promiscuous mode during an RX modeset, qeth caches the
current HW state to avoid repeated programming of the same state on each
modeset.

But while tearing down a device, we forget to clear the cached state. So
when the device is later set online again, the initial RX modeset
doesn't program the promiscuous mode since we believe it is already
enabled.
Fix this by clearing the cached state in the tear-down path.

Note that for the SBP variant of promiscuous mode, this accidentally
works right now because we unconditionally restore the SBP role while
re-initializing.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_l2_main.c | 1 +
 drivers/s390/net/qeth_l2_sys.c  | 3 ++-
 drivers/s390/net/qeth_l3_main.c | 1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 4bccdce19b5a..8b7d911dccd8 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -295,6 +295,7 @@ static void qeth_l2_stop_card(struct qeth_card *card)
 
 	flush_workqueue(card->event_wq);
 	card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
+	card->info.promisc_mode = 0;
 }
 
 static int qeth_l2_process_inbound_buffer(struct qeth_card *card,
diff --git a/drivers/s390/net/qeth_l2_sys.c b/drivers/s390/net/qeth_l2_sys.c
index e2bcb26105a3..fc7101ad84de 100644
--- a/drivers/s390/net/qeth_l2_sys.c
+++ b/drivers/s390/net/qeth_l2_sys.c
@@ -279,7 +279,8 @@ void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card)
 		return;
 
 	mutex_lock(&card->sbp_lock);
-	if (card->options.sbp.role != QETH_SBP_ROLE_NONE) {
+	if (!card->options.sbp.reflect_promisc &&
+	    card->options.sbp.role != QETH_SBP_ROLE_NONE) {
 		/* Conditional to avoid spurious error messages */
 		qeth_bridgeport_setrole(card, card->options.sbp.role);
 		/* Let the callback function refresh the stored role value. */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index d7bfc7a0e4c0..32385327539b 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1433,6 +1433,7 @@ static void qeth_l3_stop_card(struct qeth_card *card)
 	}
 
 	flush_workqueue(card->event_wq);
+	card->info.promisc_mode = 0;
 }
 
 static void qeth_l3_set_promisc_mode(struct qeth_card *card)
-- 
2.20.1

[PATCH 5.4 133/165] s390/qeth: dont return -ENOTSUPP to userspace

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 39bdbf3e648d801596498a5a625fbc9fc1c0002f ]

ENOTSUPP is not uapi, use EOPNOTSUPP instead.

Fixes: d66cb37e9664 ("qeth: Add new priority queueing options")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_sys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 9f392497d570..4c3e222e5572 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -227,7 +227,7 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev,
 		card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
 	} else if (sysfs_streq(buf, "prio_queueing_vlan")) {
 		if (IS_LAYER3(card)) {
-			rc = -ENOTSUPP;
+			rc = -EOPNOTSUPP;
 			goto out;
 		}
 		card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_VLAN;
-- 
2.20.1

[PATCH 5.4 134/165] llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)

[Greg Kroah-Hartman]

From: Chan Shu Tak, Alex <alexchan@task.com.hk>

[ Upstream commit af1c0e4e00f3cc76cb136ebf2e2c04e8b6446285 ]

When a frame with NULL DSAP is received, llc_station_rcv is called.
In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL
XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1
when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a
NULL XID response is returned unexpectedly, e.g. when the incoming frame is
a NULL TEST command.

To fix the error, simply remove the conditional operator.

A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed.

Signed-off-by: Chan Shu Tak, Alex <alexchan@task.com.hk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/llc/llc_station.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c
index 204a8351efff..c29170e767a8 100644
--- a/net/llc/llc_station.c
+++ b/net/llc/llc_station.c
@@ -32,7 +32,7 @@ static int llc_stat_ev_rx_null_dsap_xid_c(struct sk_buff *skb)
 	return LLC_PDU_IS_CMD(pdu) &&			/* command PDU */
 	       LLC_PDU_TYPE_IS_U(pdu) &&		/* U type PDU */
 	       LLC_U_PDU_CMD(pdu) == LLC_1_PDU_CMD_XID &&
-	       !pdu->dsap ? 0 : 1;			/* NULL DSAP value */
+	       !pdu->dsap;				/* NULL DSAP value */
 }
 
 static int llc_stat_ev_rx_null_dsap_test_c(struct sk_buff *skb)
@@ -42,7 +42,7 @@ static int llc_stat_ev_rx_null_dsap_test_c(struct sk_buff *skb)
 	return LLC_PDU_IS_CMD(pdu) &&			/* command PDU */
 	       LLC_PDU_TYPE_IS_U(pdu) &&		/* U type PDU */
 	       LLC_U_PDU_CMD(pdu) == LLC_1_PDU_CMD_TEST &&
-	       !pdu->dsap ? 0 : 1;			/* NULL DSAP */
+	       !pdu->dsap;				/* NULL DSAP */
 }
 
 static int llc_station_ac_send_xid_r(struct sk_buff *skb)
-- 
2.20.1

[PATCH 5.4 135/165] hv_netvsc: Fix unwanted rx_table reset

[Greg Kroah-Hartman]

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit b0689faa8efc5a3391402d7ae93bd373b7248e51 ]

In existing code, the receive indirection table, rx_table, is in
struct rndis_device, which will be reset when changing MTU, ringparam,
etc. User configured receive indirection table values will be lost.

To fix this, move rx_table to struct net_device_context, and check
netif_is_rxfh_configured(), so rx_table will be set to default only
if no user configured value.

Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/hyperv_net.h   |  3 ++-
 drivers/net/hyperv/netvsc_drv.c   |  4 ++--
 drivers/net/hyperv/rndis_filter.c | 10 +++++++---
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index fb547f37af1e..e74f2d1def80 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -169,7 +169,6 @@ struct rndis_device {
 
 	u8 hw_mac_adr[ETH_ALEN];
 	u8 rss_key[NETVSC_HASH_KEYLEN];
-	u16 rx_table[ITAB_NUM];
 };
 
 
@@ -938,6 +937,8 @@ struct net_device_context {
 
 	u32 tx_table[VRSS_SEND_TAB_SIZE];
 
+	u16 rx_table[ITAB_NUM];
+
 	/* Ethtool settings */
 	u8 duplex;
 	u32 speed;
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 963509add611..78e3e689a733 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1659,7 +1659,7 @@ static int netvsc_get_rxfh(struct net_device *dev, u32 *indir, u8 *key,
 	rndis_dev = ndev->extension;
 	if (indir) {
 		for (i = 0; i < ITAB_NUM; i++)
-			indir[i] = rndis_dev->rx_table[i];
+			indir[i] = ndc->rx_table[i];
 	}
 
 	if (key)
@@ -1689,7 +1689,7 @@ static int netvsc_set_rxfh(struct net_device *dev, const u32 *indir,
 				return -EINVAL;
 
 		for (i = 0; i < ITAB_NUM; i++)
-			rndis_dev->rx_table[i] = indir[i];
+			ndc->rx_table[i] = indir[i];
 	}
 
 	if (!key) {
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index e3d3c9097ff1..f81e58267a6e 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -767,6 +767,7 @@ static int rndis_set_rss_param_msg(struct rndis_device *rdev,
 				   const u8 *rss_key, u16 flag)
 {
 	struct net_device *ndev = rdev->ndev;
+	struct net_device_context *ndc = netdev_priv(ndev);
 	struct rndis_request *request;
 	struct rndis_set_request *set;
 	struct rndis_set_complete *set_complete;
@@ -806,7 +807,7 @@ static int rndis_set_rss_param_msg(struct rndis_device *rdev,
 	/* Set indirection table entries */
 	itab = (u32 *)(rssp + 1);
 	for (i = 0; i < ITAB_NUM; i++)
-		itab[i] = rdev->rx_table[i];
+		itab[i] = ndc->rx_table[i];
 
 	/* Set hask key values */
 	keyp = (u8 *)((unsigned long)rssp + rssp->hashkey_offset);
@@ -1305,6 +1306,7 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
 				      struct netvsc_device_info *device_info)
 {
 	struct net_device *net = hv_get_drvdata(dev);
+	struct net_device_context *ndc = netdev_priv(net);
 	struct netvsc_device *net_device;
 	struct rndis_device *rndis_device;
 	struct ndis_recv_scale_cap rsscap;
@@ -1391,9 +1393,11 @@ struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
 	/* We will use the given number of channels if available. */
 	net_device->num_chn = min(net_device->max_chn, device_info->num_chn);
 
-	for (i = 0; i < ITAB_NUM; i++)
-		rndis_device->rx_table[i] = ethtool_rxfh_indir_default(
+	if (!netif_is_rxfh_configured(net)) {
+		for (i = 0; i < ITAB_NUM; i++)
+			ndc->rx_table[i] = ethtool_rxfh_indir_default(
 						i, net_device->num_chn);
+	}
 
 	atomic_set(&net_device->open_chn, 1);
 	vmbus_set_sc_create_callback(dev->channel, netvsc_sc_open);
-- 
2.20.1

[PATCH 5.4 136/165] selftests: pmtu: fix init mtu value in description

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 152044775d0b9a9ed9509caed40efcba2677951d ]

There is no a_r3, a_r4 in the testing topology.
It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500.

Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/pmtu.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index d697815d2785..71a62e7e35b1 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -11,9 +11,9 @@
 #	R1 and R2 (also implemented with namespaces), with different MTUs:
 #
 #	  segment a_r1    segment b_r1		a_r1: 2000
-#	.--------------R1--------------.	a_r2: 1500
-#	A                               B	a_r3: 2000
-#	'--------------R2--------------'	a_r4: 1400
+#	.--------------R1--------------.	b_r1: 1400
+#	A                               B	a_r2: 2000
+#	'--------------R2--------------'	b_r2: 1500
 #	  segment a_r2    segment b_r2
 #
 #	Check that PMTU exceptions with the correct PMTU are created. Then
-- 
2.20.1

[PATCH 5.4 137/165] tracing: Do not create directories if lockdown is in affect

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit a356646a56857c2e5ad875beec734d7145ecd49a upstream.

If lockdown is disabling tracing on boot up, it prevents the tracing files
from even bering created. But when that happens, there's several places that
will give a warning that the files were not created as that is usually a
sign of a bug.

Add in strategic locations where a check is made to see if tracing is
disabled by lockdown, and if it is, do not go further, and fail silently
(but print that tracing is disabled by lockdown, without doing a WARN_ON()).

Cc: Matthew Garrett <mjg59@google.com>
Fixes: 17911ff38aa5 ("tracing: Add locked_down checks to the open calls of files created for tracefs")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    6 ++++++
 kernel/trace/trace.c       |   17 +++++++++++++++++
 2 files changed, 23 insertions(+)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -11,6 +11,7 @@
 #include <linux/trace_seq.h>
 #include <linux/spinlock.h>
 #include <linux/irq_work.h>
+#include <linux/security.h>
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
 #include <linux/kthread.h>	/* for self test */
@@ -5068,6 +5069,11 @@ static __init int test_ringbuffer(void)
 	int cpu;
 	int ret = 0;
 
+	if (security_locked_down(LOCKDOWN_TRACEFS)) {
+		pr_warning("Lockdown is enabled, skipping ring buffer tests\n");
+		return 0;
+	}
+
 	pr_info("Running ring buffer tests...\n");
 
 	buffer = ring_buffer_alloc(RB_TEST_BUFFER_SIZE, RB_FL_OVERWRITE);
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1804,6 +1804,12 @@ int __init register_tracer(struct tracer
 		return -1;
 	}
 
+	if (security_locked_down(LOCKDOWN_TRACEFS)) {
+		pr_warning("Can not register tracer %s due to lockdown\n",
+			   type->name);
+		return -EPERM;
+	}
+
 	mutex_lock(&trace_types_lock);
 
 	tracing_selftest_running = true;
@@ -8647,6 +8653,11 @@ struct dentry *tracing_init_dentry(void)
 {
 	struct trace_array *tr = &global_trace;
 
+	if (security_locked_down(LOCKDOWN_TRACEFS)) {
+		pr_warning("Tracing disabled due to lockdown\n");
+		return ERR_PTR(-EPERM);
+	}
+
 	/* The top level trace array uses  NULL as parent */
 	if (tr->dir)
 		return NULL;
@@ -9089,6 +9100,12 @@ __init static int tracer_alloc_buffers(v
 	int ring_buf_size;
 	int ret = -ENOMEM;
 
+
+	if (security_locked_down(LOCKDOWN_TRACEFS)) {
+		pr_warning("Tracing disabled due to lockdown\n");
+		return -EPERM;
+	}
+
 	/*
 	 * Make sure we don't accidently add more trace options
 	 * than we have bits for.

[PATCH 5.4 138/165] gtp: fix bad unlock balance in gtp_encap_enable_socket

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 90d72256addff9e5f8ad645e8f632750dd1f8935 ]

WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!

other info that might help us debug this:
2 locks held by syz-executor921/9688:
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951

stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
 print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
 __lock_release kernel/locking/lockdep.c:4242 [inline]
 lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
 sock_release_ownership include/net/sock.h:1496 [inline]
 release_sock+0x17c/0x1c0 net/core/sock.c:2961
 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
 gtp_encap_enable drivers/net/gtp.c:852 [inline]
 gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 ____sys_sendmsg+0x753/0x880 net/socket.c:2330
 ___sys_sendmsg+0x100/0x170 net/socket.c:2384
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg net/socket.c:2424 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c
R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf

Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/gtp.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -813,7 +813,7 @@ static struct sock *gtp_encap_enable_soc
 	lock_sock(sock->sk);
 	if (sock->sk->sk_user_data) {
 		sk = ERR_PTR(-EBUSY);
-		goto out_sock;
+		goto out_rel_sock;
 	}
 
 	sk = sock->sk;
@@ -826,8 +826,9 @@ static struct sock *gtp_encap_enable_soc
 
 	setup_udp_tunnel_sock(sock_net(sock->sk), sock, &tuncfg);
 
-out_sock:
+out_rel_sock:
 	release_sock(sock->sk);
+out_sock:
 	sockfd_put(sock);
 	return sk;
 }

[PATCH 5.4 139/165] macvlan: do not assume mac_header is set in macvlan_broadcast()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 96cc4b69581db68efc9749ef32e9cf8e0160c509 ]

Use of eth_hdr() in tx path is error prone.

Many drivers call skb_reset_mac_header() before using it,
but others do not.

Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.

Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.

Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.

BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579

CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
 mc_hash drivers/net/macvlan.c:251 [inline]
 macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
 macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
 __netdev_start_xmit include/linux/netdevice.h:4447 [inline]
 netdev_start_xmit include/linux/netdevice.h:4461 [inline]
 dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
 packet_snd net/packet/af_packet.c:2966 [inline]
 packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 __sys_sendto+0x262/0x380 net/socket.c:1985
 __do_sys_sendto net/socket.c:1997 [inline]
 __se_sys_sendto net/socket.c:1993 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
 __do_kmalloc mm/slab.c:3656 [inline]
 __kmalloc+0x163/0x770 mm/slab.c:3665
 kmalloc include/linux/slab.h:561 [inline]
 tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10a/0x2c0 mm/slab.c:3757
 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a4932000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
 4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macvlan.c    |    2 +-
 include/linux/if_ether.h |    8 ++++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -259,7 +259,7 @@ static void macvlan_broadcast(struct sk_
 			      struct net_device *src,
 			      enum macvlan_mode mode)
 {
-	const struct ethhdr *eth = eth_hdr(skb);
+	const struct ethhdr *eth = skb_eth_hdr(skb);
 	const struct macvlan_dev *vlan;
 	struct sk_buff *nskb;
 	unsigned int i;
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -24,6 +24,14 @@ static inline struct ethhdr *eth_hdr(con
 	return (struct ethhdr *)skb_mac_header(skb);
 }
 
+/* Prefer this version in TX path, instead of
+ * skb_reset_mac_header() + eth_hdr()
+ */
+static inline struct ethhdr *skb_eth_hdr(const struct sk_buff *skb)
+{
+	return (struct ethhdr *)skb->data;
+}
+
 static inline struct ethhdr *inner_eth_hdr(const struct sk_buff *skb)
 {
 	return (struct ethhdr *)skb_inner_mac_header(skb);

[PATCH 5.4 140/165] net: dsa: mv88e6xxx: Preserve priority when setting CPU port.

[Greg Kroah-Hartman]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit d8dc2c9676e614ef62f54a155b50076888c8a29a ]

The 6390 family uses an extended register to set the port connected to
the CPU. The lower 5 bits indicate the port, the upper three bits are
the priority of the frames as they pass through the switch, what
egress queue they should use, etc. Since frames being set to the CPU
are typically management frames, BPDU, IGMP, ARP, etc set the priority
to 7, the reset default, and the highest.

Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/global1.c |    5 +++++
 drivers/net/dsa/mv88e6xxx/global1.h |    1 +
 2 files changed, 6 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -332,6 +332,11 @@ int mv88e6390_g1_set_cpu_port(struct mv8
 {
 	u16 ptr = MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST;
 
+	/* Use the default high priority for management frames sent to
+	 * the CPU.
+	 */
+	port |= MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST_MGMTPRI;
+
 	return mv88e6390_g1_monitor_write(chip, ptr, port);
 }
 
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -210,6 +210,7 @@
 #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_INGRESS_DEST		0x2000
 #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_EGRESS_DEST		0x2100
 #define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST		0x3000
+#define MV88E6390_G1_MONITOR_MGMT_CTL_PTR_CPU_DEST_MGMTPRI	0x00e0
 #define MV88E6390_G1_MONITOR_MGMT_CTL_DATA_MASK			0x00ff
 
 /* Offset 0x1C: Global Control 2 */

[PATCH 5.4 141/165] net: freescale: fec: Fix ethtool -d runtime PM

[Greg Kroah-Hartman]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit c72a0bc0aa19f49160330a65ab77184b5b7d131b ]

In order to dump the FECs registers the clocks have to be ticking,
otherwise a data abort occurs.  Add calls to runtime PM so they are
enabled and later disabled.

Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power")
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec_main.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2199,8 +2199,14 @@ static void fec_enet_get_regs(struct net
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	u32 __iomem *theregs = (u32 __iomem *)fep->hwp;
+	struct device *dev = &fep->pdev->dev;
 	u32 *buf = (u32 *)regbuf;
 	u32 i, off;
+	int ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		return;
 
 	regs->version = fec_enet_register_version;
 
@@ -2216,6 +2222,9 @@ static void fec_enet_get_regs(struct net
 		off >>= 2;
 		buf[off] = readl(&theregs[off]);
 	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static int fec_enet_get_ts_info(struct net_device *ndev,

[PATCH 5.4 142/165] net: stmmac: dwmac-sun8i: Allow all RGMII modes

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit f1239d8aa84dad8fe4b6cc1356f40fc8e842db47 ]

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -957,6 +957,9 @@ static int sun8i_dwmac_set_syscon(struct
 		/* default */
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RMII:

[PATCH 5.4 143/165] net: stmmac: dwmac-sunxi: Allow all RGMII modes

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 52cc73e5404c7ba0cbfc50cb4c265108c84b3d5a ]

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -44,7 +44,7 @@ static int sun7i_gmac_init(struct platfo
 	 * rate, which then uses the auto-reparenting feature of the
 	 * clock driver, and enabling/disabling the clock.
 	 */
-	if (gmac->interface == PHY_INTERFACE_MODE_RGMII) {
+	if (phy_interface_mode_is_rgmii(gmac->interface)) {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
 		clk_prepare_enable(gmac->tx_clk);
 		gmac->clk_enabled = 1;

[PATCH 5.4 144/165] net: stmmac: Fixed link does not need MDIO Bus

[Greg Kroah-Hartman]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit da29f2d84bd10234df570b7f07cbd0166e738230 ]

When using fixed link we don't need the MDIO bus support.

Reported-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: d3e014ec7d5e ("net: stmmac: platform: Fix MDIO init for platforms without PHY")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Acked-by: Sriram Dash <Sriram.dash@samsung.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch).
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -320,7 +320,7 @@ out:
 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
 			 struct device_node *np, struct device *dev)
 {
-	bool mdio = false;
+	bool mdio = !of_phy_is_fixed_link(np);
 	static const struct of_device_id need_mdio_ids[] = {
 		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
 		{},

[PATCH 5.4 145/165] net: usb: lan78xx: fix possible skb leak

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 47240ba0cd09bb6fe6db9889582048324999dfa4 ]

If skb_linearize() fails, we need to free the skb.

TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/lan78xx.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2724,11 +2724,6 @@ static int lan78xx_stop(struct net_devic
 	return 0;
 }
 
-static int lan78xx_linearize(struct sk_buff *skb)
-{
-	return skb_linearize(skb);
-}
-
 static struct sk_buff *lan78xx_tx_prep(struct lan78xx_net *dev,
 				       struct sk_buff *skb, gfp_t flags)
 {
@@ -2740,8 +2735,10 @@ static struct sk_buff *lan78xx_tx_prep(s
 		return NULL;
 	}
 
-	if (lan78xx_linearize(skb) < 0)
+	if (skb_linearize(skb)) {
+		dev_kfree_skb_any(skb);
 		return NULL;
+	}
 
 	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN_MASK_) | TX_CMD_A_FCS_;
 

[PATCH 5.4 146/165] pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d9e15a2733067c9328fb56d98fe8e574fa19ec31 ]

As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
  f->credit += q->quantum;
  goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_fq.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -787,10 +787,12 @@ static int fq_change(struct Qdisc *sch,
 	if (tb[TCA_FQ_QUANTUM]) {
 		u32 quantum = nla_get_u32(tb[TCA_FQ_QUANTUM]);
 
-		if (quantum > 0)
+		if (quantum > 0 && quantum <= (1 << 20)) {
 			q->quantum = quantum;
-		else
+		} else {
+			NL_SET_ERR_MSG_MOD(extack, "invalid quantum");
 			err = -EINVAL;
+		}
 	}
 
 	if (tb[TCA_FQ_INITIAL_QUANTUM])

[PATCH 5.4 147/165] sch_cake: avoid possible divide by zero in cake_enqueue()

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit 68aab823c223646fab311f8a6581994facee66a0 ]

The variables 'window_interval' is u64 and do_div()
truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
The unit of window_interval is nanoseconds,
so its lower 32-bit is relatively easy to exceed.
Fix this issue by using div64_u64() instead.

Fixes: 7298de9cd725 ("sch_cake: Add ingress mode")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: cake@lists.bufferbloat.net
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_cake.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -1769,7 +1769,7 @@ static s32 cake_enqueue(struct sk_buff *
 						      q->avg_window_begin));
 			u64 b = q->avg_window_bytes * (u64)NSEC_PER_SEC;
 
-			do_div(b, window_interval);
+			b = div64_u64(b, window_interval);
 			q->avg_peak_bandwidth =
 				cake_ewma(q->avg_peak_bandwidth, b,
 					  b > q->avg_peak_bandwidth ? 2 : 8);

[PATCH 5.4 148/165] sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit be7a7729207797476b6666f046d765bdf9630407 ]

This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.

So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.

Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_sideeffect.c |   28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1358,8 +1358,10 @@ static int sctp_cmd_interpreter(enum sct
 			/* Generate an INIT ACK chunk.  */
 			new_obj = sctp_make_init_ack(asoc, chunk, GFP_ATOMIC,
 						     0);
-			if (!new_obj)
-				goto nomem;
+			if (!new_obj) {
+				error = -ENOMEM;
+				break;
+			}
 
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(new_obj));
@@ -1381,7 +1383,8 @@ static int sctp_cmd_interpreter(enum sct
 			if (!new_obj) {
 				if (cmd->obj.chunk)
 					sctp_chunk_free(cmd->obj.chunk);
-				goto nomem;
+				error = -ENOMEM;
+				break;
 			}
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(new_obj));
@@ -1428,8 +1431,10 @@ static int sctp_cmd_interpreter(enum sct
 
 			/* Generate a SHUTDOWN chunk.  */
 			new_obj = sctp_make_shutdown(asoc, chunk);
-			if (!new_obj)
-				goto nomem;
+			if (!new_obj) {
+				error = -ENOMEM;
+				break;
+			}
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(new_obj));
 			break;
@@ -1765,11 +1770,17 @@ static int sctp_cmd_interpreter(enum sct
 			break;
 		}
 
-		if (error)
+		if (error) {
+			cmd = sctp_next_cmd(commands);
+			while (cmd) {
+				if (cmd->verb == SCTP_CMD_REPLY)
+					sctp_chunk_free(cmd->obj.chunk);
+				cmd = sctp_next_cmd(commands);
+			}
 			break;
+		}
 	}
 
-out:
 	/* If this is in response to a received chunk, wait until
 	 * we are done with the packet to open the queue so that we don't
 	 * send multiple packets in response to a single request.
@@ -1784,7 +1795,4 @@ out:
 		sp->data_ready_signalled = 0;
 
 	return error;
-nomem:
-	error = -ENOMEM;
-	goto out;
 }

[PATCH 5.4 149/165] tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACK

[Greg Kroah-Hartman]

From: Pengcheng Yang <yangpc@wangsu.com>

[ Upstream commit c9655008e7845bcfdaac10a1ed8554ec167aea88 ]

When we receive a D-SACK, where the sequence number satisfies:
	undo_marker <= start_seq < end_seq <= prior_snd_una
we consider this is a valid D-SACK and tcp_is_sackblock_valid()
returns true, then this D-SACK is discarded as "old stuff",
but the variable first_sack_index is not marked as negative
in tcp_sacktag_write_queue().

If this D-SACK also carries a SACK that needs to be processed
(for example, the previous SACK segment was lost), this SACK
will be treated as a D-SACK in the following processing of
tcp_sacktag_write_queue(), which will eventually lead to
incorrect updates of undo_retrans and reordering.

Fixes: fd6dad616d4f ("[TCP]: Earlier SACK block verification & simplify access to them")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1727,8 +1727,11 @@ tcp_sacktag_write_queue(struct sock *sk,
 		}
 
 		/* Ignore very old stuff early */
-		if (!after(sp[used_sacks].end_seq, prior_snd_una))
+		if (!after(sp[used_sacks].end_seq, prior_snd_una)) {
+			if (i == 0)
+				first_sack_index = -1;
 			continue;
+		}
 
 		used_sacks++;
 	}

[PATCH 5.4 150/165] vxlan: fix tos value before xmit

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 71130f29979c7c7956b040673e6b9d5643003176 ]

Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter
tos value by RT_TOS() instead of using config tos directly.

vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't
return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS()
directly in function ip_tunnel_ecn_encap().

Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API")
Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vxlan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2542,7 +2542,7 @@ static void vxlan_xmit_one(struct sk_buf
 		ndst = &rt->dst;
 		skb_tunnel_check_pmtu(skb, ndst, VXLAN_HEADROOM);
 
-		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
+		tos = ip_tunnel_ecn_encap(RT_TOS(tos), old_iph, skb);
 		ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
 		err = vxlan_build_skb(skb, ndst, sizeof(struct iphdr),
 				      vni, md, flags, udp_sum);
@@ -2582,7 +2582,7 @@ static void vxlan_xmit_one(struct sk_buf
 
 		skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM);
 
-		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
+		tos = ip_tunnel_ecn_encap(RT_TOS(tos), old_iph, skb);
 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
 		skb_scrub_packet(skb, xnet);
 		err = vxlan_build_skb(skb, ndst, sizeof(struct ipv6hdr),

[PATCH 5.4 151/165] mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO

[Greg Kroah-Hartman]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 3971a535b839489e4ea31796cc086e6ce616318c ]

The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:

    Warning: Offloading graft operation failed.

Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.

Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c
@@ -650,6 +650,13 @@ mlxsw_sp_qdisc_prio_graft(struct mlxsw_s
 	    mlxsw_sp_port->tclass_qdiscs[tclass_num].handle == p->child_handle)
 		return 0;
 
+	if (!p->child_handle) {
+		/* This is an invisible FIFO replacing the original Qdisc.
+		 * Ignore it--the original Qdisc's destroy will follow.
+		 */
+		return 0;
+	}
+
 	/* See if the grafted qdisc is already offloaded on any tclass. If so,
 	 * unoffload it.
 	 */

[PATCH 5.4 152/165] net: sch_prio: When ungrafting, replace with FIFO

[Greg Kroah-Hartman]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 240ce7f6428ff5188b9eedc066e1e4d645b8635f ]

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_prio.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -292,8 +292,14 @@ static int prio_graft(struct Qdisc *sch,
 	struct tc_prio_qopt_offload graft_offload;
 	unsigned long band = arg - 1;
 
-	if (new == NULL)
-		new = &noop_qdisc;
+	if (!new) {
+		new = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops,
+					TC_H_MAKE(sch->handle, arg), extack);
+		if (!new)
+			new = &noop_qdisc;
+		else
+			qdisc_hash_add(new, true);
+	}
 
 	*old = qdisc_replace(sch, new, &q->queues[band]);
 

[PATCH 5.4 153/165] vlan: fix memory leak in vlan_dev_set_egress_priority

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9bbd917e0bec9aebdbd0c8dbc966caec15eb33e9 ]

There are few cases where the ndo_uninit() handler might be not
called if an error happens while device is initialized.

Since vlan_newlink() calls vlan_changelink() before
trying to register the netdevice, we need to make sure
vlan_dev_uninit() has been called at least once,
or we might leak allocated memory.

BUG: memory leak
unreferenced object 0xffff888122a206c0 (size 32):
  comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00  ......as........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline]
    [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
    [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline]
    [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194
    [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126
    [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181
    [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305
    [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363
    [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
    [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixe: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/8021q/vlan.h         |    1 +
 net/8021q/vlan_dev.c     |    3 ++-
 net/8021q/vlan_netlink.c |    9 +++++----
 3 files changed, 8 insertions(+), 5 deletions(-)

--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -126,6 +126,7 @@ int vlan_check_real_dev(struct net_devic
 void vlan_setup(struct net_device *dev);
 int register_vlan_dev(struct net_device *dev, struct netlink_ext_ack *extack);
 void unregister_vlan_dev(struct net_device *dev, struct list_head *head);
+void vlan_dev_uninit(struct net_device *dev);
 bool vlan_dev_inherit_address(struct net_device *dev,
 			      struct net_device *real_dev);
 
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -586,7 +586,8 @@ static int vlan_dev_init(struct net_devi
 	return 0;
 }
 
-static void vlan_dev_uninit(struct net_device *dev)
+/* Note: this function might be called multiple times for the same device. */
+void vlan_dev_uninit(struct net_device *dev)
 {
 	struct vlan_priority_tci_mapping *pm;
 	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -179,10 +179,11 @@ static int vlan_newlink(struct net *src_
 		return -EINVAL;
 
 	err = vlan_changelink(dev, tb, data, extack);
-	if (err < 0)
-		return err;
-
-	return register_vlan_dev(dev, extack);
+	if (!err)
+		err = register_vlan_dev(dev, extack);
+	if (err)
+		vlan_dev_uninit(dev);
+	return err;
 }
 
 static inline size_t vlan_qos_map_size(unsigned int n)

[PATCH 5.4 154/165] vlan: vlan_changelink() should propagate errors

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit eb8ef2a3c50092bb018077c047b8dba1ce0e78e3 ]

Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.

Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/8021q/vlan_netlink.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -108,11 +108,13 @@ static int vlan_changelink(struct net_de
 	struct ifla_vlan_flags *flags;
 	struct ifla_vlan_qos_mapping *m;
 	struct nlattr *attr;
-	int rem;
+	int rem, err;
 
 	if (data[IFLA_VLAN_FLAGS]) {
 		flags = nla_data(data[IFLA_VLAN_FLAGS]);
-		vlan_dev_change_flags(dev, flags->flags, flags->mask);
+		err = vlan_dev_change_flags(dev, flags->flags, flags->mask);
+		if (err)
+			return err;
 	}
 	if (data[IFLA_VLAN_INGRESS_QOS]) {
 		nla_for_each_nested(attr, data[IFLA_VLAN_INGRESS_QOS], rem) {
@@ -123,7 +125,9 @@ static int vlan_changelink(struct net_de
 	if (data[IFLA_VLAN_EGRESS_QOS]) {
 		nla_for_each_nested(attr, data[IFLA_VLAN_EGRESS_QOS], rem) {
 			m = nla_data(attr);
-			vlan_dev_set_egress_priority(dev, m->from, m->to);
+			err = vlan_dev_set_egress_priority(dev, m->from, m->to);
+			if (err)
+				return err;
 		}
 	}
 	return 0;

[PATCH 5.4 155/165] macb: Dont unregister clks unconditionally

[Greg Kroah-Hartman]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit d89091a4930ee0d80bee3e259a98513f3a2543ec ]

The only clk init function in this driver that register a clk is
fu540_c000_clk_init(), and thus we need to unregister the clk when this
driver is removed on that platform. Other init functions, for example
macb_clk_init(), don't register clks and therefore we shouldn't
unregister the clks when this driver is removed. Convert this
registration path to devm so it gets auto-unregistered when this driver
is removed and drop the clk_unregister() calls in driver remove (and
error paths) so that we don't erroneously remove a clk from the system
that isn't registered by this driver.

Otherwise we get strange crashes with a use-after-free when the
devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer
that has become invalid because it is freed in clk_unregister().

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Yash Shah <yash.shah@sifive.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/cadence/macb_main.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4027,7 +4027,7 @@ static int fu540_c000_clk_init(struct pl
 	mgmt->rate = 0;
 	mgmt->hw.init = &init;
 
-	*tx_clk = clk_register(NULL, &mgmt->hw);
+	*tx_clk = devm_clk_register(&pdev->dev, &mgmt->hw);
 	if (IS_ERR(*tx_clk))
 		return PTR_ERR(*tx_clk);
 
@@ -4361,7 +4361,6 @@ err_out_free_netdev:
 
 err_disable_clocks:
 	clk_disable_unprepare(tx_clk);
-	clk_unregister(tx_clk);
 	clk_disable_unprepare(hclk);
 	clk_disable_unprepare(pclk);
 	clk_disable_unprepare(rx_clk);
@@ -4397,7 +4396,6 @@ static int macb_remove(struct platform_d
 		pm_runtime_dont_use_autosuspend(&pdev->dev);
 		if (!pm_runtime_suspended(&pdev->dev)) {
 			clk_disable_unprepare(bp->tx_clk);
-			clk_unregister(bp->tx_clk);
 			clk_disable_unprepare(bp->hclk);
 			clk_disable_unprepare(bp->pclk);
 			clk_disable_unprepare(bp->rx_clk);

[PATCH 5.4 156/165] net/mlx5: Move devlink registration before interfaces load

[Greg Kroah-Hartman]

From: Michael Guralnik <michaelgur@mellanox.com>

[ Upstream commit a6f3b62386a02c1e94bfa22c543f82d63f5e631b ]

Register devlink before interfaces are added.
This will allow interfaces to use devlink while initalizing. For example,
call mlx5_is_roce_enabled.

Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1197,6 +1197,12 @@ static int mlx5_load_one(struct mlx5_cor
 	if (err)
 		goto err_load;
 
+	if (boot) {
+		err = mlx5_devlink_register(priv_to_devlink(dev), dev->device);
+		if (err)
+			goto err_devlink_reg;
+	}
+
 	if (mlx5_device_registered(dev)) {
 		mlx5_attach_device(dev);
 	} else {
@@ -1214,6 +1220,9 @@ out:
 	return err;
 
 err_reg_dev:
+	if (boot)
+		mlx5_devlink_unregister(priv_to_devlink(dev));
+err_devlink_reg:
 	mlx5_unload(dev);
 err_load:
 	if (boot)
@@ -1353,10 +1362,6 @@ static int init_one(struct pci_dev *pdev
 
 	request_module_nowait(MLX5_IB_MOD);
 
-	err = mlx5_devlink_register(devlink, &pdev->dev);
-	if (err)
-		goto clean_load;
-
 	err = mlx5_crdump_enable(dev);
 	if (err)
 		dev_err(&pdev->dev, "mlx5_crdump_enable failed with error code %d\n", err);
@@ -1364,9 +1369,6 @@ static int init_one(struct pci_dev *pdev
 	pci_save_state(pdev);
 	return 0;
 
-clean_load:
-	mlx5_unload_one(dev, true);
-
 err_load_one:
 	mlx5_pci_close(dev);
 pci_init_err:

[PATCH 5.4 157/165] net: dsa: mv88e6xxx: force cmode write on 6141/6341

[Greg Kroah-Hartman]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit f7a48b68abd9b20ce1ac6298aaaa3c4d158271dd ]

mv88e6xxx_port_set_cmode() relies on cmode stored in struct
mv88e6xxx_port to skip cmode update when the requested value matches the
cached value. It turns out that mv88e6xxx_port_hidden_write() might
change the port cmode setting as a side effect, so we can't rely on the
cached value to determine that cmode update in not necessary.

Force cmode update in mv88e6341_port_set_cmode(), to make
serdes configuration work again. Other mv88e6xxx_port_set_cmode()
callers keep the current behaviour.

This fixes serdes configuration of the 6141 switch on SolidRun Clearfog
GT-8K.

Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family")
Reported-by: Denis Odintsov <d.odintsov@traviangames.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/port.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -393,7 +393,7 @@ phy_interface_t mv88e6390x_port_max_spee
 }
 
 static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
-				    phy_interface_t mode)
+				    phy_interface_t mode, bool force)
 {
 	u8 lane;
 	u16 cmode;
@@ -427,8 +427,8 @@ static int mv88e6xxx_port_set_cmode(stru
 		cmode = 0;
 	}
 
-	/* cmode doesn't change, nothing to do for us */
-	if (cmode == chip->ports[port].cmode)
+	/* cmode doesn't change, nothing to do for us unless forced */
+	if (cmode == chip->ports[port].cmode && !force)
 		return 0;
 
 	lane = mv88e6xxx_serdes_get_lane(chip, port);
@@ -484,7 +484,7 @@ int mv88e6390x_port_set_cmode(struct mv8
 	if (port != 9 && port != 10)
 		return -EOPNOTSUPP;
 
-	return mv88e6xxx_port_set_cmode(chip, port, mode);
+	return mv88e6xxx_port_set_cmode(chip, port, mode, false);
 }
 
 int mv88e6390_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
@@ -504,7 +504,7 @@ int mv88e6390_port_set_cmode(struct mv88
 		break;
 	}
 
-	return mv88e6xxx_port_set_cmode(chip, port, mode);
+	return mv88e6xxx_port_set_cmode(chip, port, mode, false);
 }
 
 static int mv88e6341_port_set_cmode_writable(struct mv88e6xxx_chip *chip,
@@ -555,7 +555,7 @@ int mv88e6341_port_set_cmode(struct mv88
 	if (err)
 		return err;
 
-	return mv88e6xxx_port_set_cmode(chip, port, mode);
+	return mv88e6xxx_port_set_cmode(chip, port, mode, true);
 }
 
 int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode)

[PATCH 5.4 158/165] net/mlx5e: Always print health reporter message to dmesg

[Greg Kroah-Hartman]

From: Eran Ben Elisha <eranbe@mellanox.com>

[ Upstream commit 99cda45426c9a2c59bb2f7cb886a405440282455 ]

In case a reporter exists, error message is logged only to the devlink
tracer. The devlink tracer is a visibility utility only, which user can
choose not to monitor.
After cited patch, 3rd party monitoring tools that tracks these error
message will no longer find them in dmesg, causing a regression.

With this patch, error messages are also logged into the dmesg.

Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/health.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
@@ -197,9 +197,10 @@ int mlx5e_health_report(struct mlx5e_pri
 			struct devlink_health_reporter *reporter, char *err_str,
 			struct mlx5e_err_ctx *err_ctx)
 {
-	if (!reporter) {
-		netdev_err(priv->netdev, err_str);
+	netdev_err(priv->netdev, err_str);
+
+	if (!reporter)
 		return err_ctx->recover(&err_ctx->ctx);
-	}
+
 	return devlink_health_report(reporter, err_str, err_ctx);
 }

[PATCH 5.4 159/165] net/mlx5: DR, No need for atomic refcount for internal SW steering resources

[Greg Kroah-Hartman]

From: Yevgeny Kliteynik <kliteyn@mellanox.com>

[ Upstream commit 4ce380ca477507e2f413584cdd99e1698d6682d6 ]

No need for an atomic refcounter for the STE and hashtables.
These are internal SW steering resources and they are always
under domain mutex.

This also fixes the following refcount error:
  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0
  Call Trace:
   dr_table_init_nic+0x10d/0x110 [mlx5_core]
   mlx5dr_table_create+0xb4/0x230 [mlx5_core]
   mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core]
   __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core]
   esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core]
   ...

Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c  |    2 -
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c   |   10 ++++----
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h |   14 ++++++------
 3 files changed, 14 insertions(+), 12 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
@@ -209,7 +209,7 @@ static void dr_rule_rehash_copy_ste_ctrl
 	/* We need to copy the refcount since this ste
 	 * may have been traversed several times
 	 */
-	refcount_set(&new_ste->refcount, refcount_read(&cur_ste->refcount));
+	new_ste->refcount = cur_ste->refcount;
 
 	/* Link old STEs rule_mem list to the new ste */
 	mlx5dr_rule_update_rule_member(cur_ste, new_ste);
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c
@@ -340,7 +340,7 @@ static void dr_ste_replace(struct mlx5dr
 	if (dst->next_htbl)
 		dst->next_htbl->pointing_ste = dst;
 
-	refcount_set(&dst->refcount, refcount_read(&src->refcount));
+	dst->refcount = src->refcount;
 
 	INIT_LIST_HEAD(&dst->rule_list);
 	list_splice_tail_init(&src->rule_list, &dst->rule_list);
@@ -557,7 +557,7 @@ bool mlx5dr_ste_is_not_valid_entry(u8 *p
 
 bool mlx5dr_ste_not_used_ste(struct mlx5dr_ste *ste)
 {
-	return !refcount_read(&ste->refcount);
+	return !ste->refcount;
 }
 
 /* Init one ste as a pattern for ste data array */
@@ -681,14 +681,14 @@ struct mlx5dr_ste_htbl *mlx5dr_ste_htbl_
 	htbl->ste_arr = chunk->ste_arr;
 	htbl->hw_ste_arr = chunk->hw_ste_arr;
 	htbl->miss_list = chunk->miss_list;
-	refcount_set(&htbl->refcount, 0);
+	htbl->refcount = 0;
 
 	for (i = 0; i < chunk->num_of_entries; i++) {
 		struct mlx5dr_ste *ste = &htbl->ste_arr[i];
 
 		ste->hw_ste = htbl->hw_ste_arr + i * DR_STE_SIZE_REDUCED;
 		ste->htbl = htbl;
-		refcount_set(&ste->refcount, 0);
+		ste->refcount = 0;
 		INIT_LIST_HEAD(&ste->miss_list_node);
 		INIT_LIST_HEAD(&htbl->miss_list[i]);
 		INIT_LIST_HEAD(&ste->rule_list);
@@ -705,7 +705,7 @@ out_free_htbl:
 
 int mlx5dr_ste_htbl_free(struct mlx5dr_ste_htbl *htbl)
 {
-	if (refcount_read(&htbl->refcount))
+	if (htbl->refcount)
 		return -EBUSY;
 
 	mlx5dr_icm_free_chunk(htbl->chunk);
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
@@ -117,7 +117,7 @@ struct mlx5dr_matcher_rx_tx;
 struct mlx5dr_ste {
 	u8 *hw_ste;
 	/* refcount: indicates the num of rules that using this ste */
-	refcount_t refcount;
+	u32 refcount;
 
 	/* attached to the miss_list head at each htbl entry */
 	struct list_head miss_list_node;
@@ -149,7 +149,7 @@ struct mlx5dr_ste_htbl_ctrl {
 struct mlx5dr_ste_htbl {
 	u8 lu_type;
 	u16 byte_mask;
-	refcount_t refcount;
+	u32 refcount;
 	struct mlx5dr_icm_chunk *chunk;
 	struct mlx5dr_ste *ste_arr;
 	u8 *hw_ste_arr;
@@ -200,13 +200,14 @@ int mlx5dr_ste_htbl_free(struct mlx5dr_s
 
 static inline void mlx5dr_htbl_put(struct mlx5dr_ste_htbl *htbl)
 {
-	if (refcount_dec_and_test(&htbl->refcount))
+	htbl->refcount--;
+	if (!htbl->refcount)
 		mlx5dr_ste_htbl_free(htbl);
 }
 
 static inline void mlx5dr_htbl_get(struct mlx5dr_ste_htbl *htbl)
 {
-	refcount_inc(&htbl->refcount);
+	htbl->refcount++;
 }
 
 /* STE utils */
@@ -248,14 +249,15 @@ static inline void mlx5dr_ste_put(struct
 				  struct mlx5dr_matcher *matcher,
 				  struct mlx5dr_matcher_rx_tx *nic_matcher)
 {
-	if (refcount_dec_and_test(&ste->refcount))
+	ste->refcount--;
+	if (!ste->refcount)
 		mlx5dr_ste_free(ste, matcher, nic_matcher);
 }
 
 /* initial as 0, increased only when ste appears in a new rule */
 static inline void mlx5dr_ste_get(struct mlx5dr_ste *ste)
 {
-	refcount_inc(&ste->refcount);
+	ste->refcount++;
 }
 
 void mlx5dr_ste_set_hit_addr_by_next_htbl(u8 *hw_ste,

[PATCH 5.4 160/165] net/mlx5e: Fix hairpin RSS table size

[Greg Kroah-Hartman]

From: Eli Cohen <eli@mellanox.com>

[ Upstream commit 6412bb396a63f28de994b1480edf8e4caf4aa494 ]

Set hairpin table size to the corret size, based on the groups that
would be created in it. Groups are laid out on the table such that a
group occupies a range of entries in the table. This implies that the
group ranges should have correspondence to the table they are laid upon.

The patch cited below  made group 1's size to grow hence causing
overflow of group range laid on the table.

Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/fs.h |   16 ++++++++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c |   16 ----------------
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c |    2 +-
 3 files changed, 17 insertions(+), 17 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
@@ -122,6 +122,22 @@ enum {
 #endif
 };
 
+#define MLX5E_TTC_NUM_GROUPS	3
+#define MLX5E_TTC_GROUP1_SIZE	(BIT(3) + MLX5E_NUM_TUNNEL_TT)
+#define MLX5E_TTC_GROUP2_SIZE	 BIT(1)
+#define MLX5E_TTC_GROUP3_SIZE	 BIT(0)
+#define MLX5E_TTC_TABLE_SIZE	(MLX5E_TTC_GROUP1_SIZE +\
+				 MLX5E_TTC_GROUP2_SIZE +\
+				 MLX5E_TTC_GROUP3_SIZE)
+
+#define MLX5E_INNER_TTC_NUM_GROUPS	3
+#define MLX5E_INNER_TTC_GROUP1_SIZE	BIT(3)
+#define MLX5E_INNER_TTC_GROUP2_SIZE	BIT(1)
+#define MLX5E_INNER_TTC_GROUP3_SIZE	BIT(0)
+#define MLX5E_INNER_TTC_TABLE_SIZE	(MLX5E_INNER_TTC_GROUP1_SIZE +\
+					 MLX5E_INNER_TTC_GROUP2_SIZE +\
+					 MLX5E_INNER_TTC_GROUP3_SIZE)
+
 #ifdef CONFIG_MLX5_EN_RXNFC
 
 struct mlx5e_ethtool_table {
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -904,22 +904,6 @@ del_rules:
 	return err;
 }
 
-#define MLX5E_TTC_NUM_GROUPS	3
-#define MLX5E_TTC_GROUP1_SIZE	(BIT(3) + MLX5E_NUM_TUNNEL_TT)
-#define MLX5E_TTC_GROUP2_SIZE	 BIT(1)
-#define MLX5E_TTC_GROUP3_SIZE	 BIT(0)
-#define MLX5E_TTC_TABLE_SIZE	(MLX5E_TTC_GROUP1_SIZE +\
-				 MLX5E_TTC_GROUP2_SIZE +\
-				 MLX5E_TTC_GROUP3_SIZE)
-
-#define MLX5E_INNER_TTC_NUM_GROUPS	3
-#define MLX5E_INNER_TTC_GROUP1_SIZE	BIT(3)
-#define MLX5E_INNER_TTC_GROUP2_SIZE	BIT(1)
-#define MLX5E_INNER_TTC_GROUP3_SIZE	BIT(0)
-#define MLX5E_INNER_TTC_TABLE_SIZE	(MLX5E_INNER_TTC_GROUP1_SIZE +\
-					 MLX5E_INNER_TTC_GROUP2_SIZE +\
-					 MLX5E_INNER_TTC_GROUP3_SIZE)
-
 static int mlx5e_create_ttc_table_groups(struct mlx5e_ttc_table *ttc,
 					 bool use_ipv)
 {
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -586,7 +586,7 @@ static void mlx5e_hairpin_set_ttc_params
 	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++)
 		ttc_params->indir_tirn[tt] = hp->indir_tirn[tt];
 
-	ft_attr->max_fte = MLX5E_NUM_TT;
+	ft_attr->max_fte = MLX5E_TTC_TABLE_SIZE;
 	ft_attr->level = MLX5E_TC_TTC_FT_LEVEL;
 	ft_attr->prio = MLX5E_TC_PRIO;
 }

[PATCH 5.4 161/165] net/mlx5: DR, Init lists that are used in rules member

[Greg Kroah-Hartman]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit df55c5586e5185f890192a6802dc5b46fddd3606 ]

Whenever adding new member of rule object we attach it to 2 lists,
These 2 lists should be initialized first.

Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
@@ -638,6 +638,9 @@ static int dr_rule_add_member(struct mlx
 	if (!rule_mem)
 		return -ENOMEM;
 
+	INIT_LIST_HEAD(&rule_mem->list);
+	INIT_LIST_HEAD(&rule_mem->use_ste_list);
+
 	rule_mem->ste = ste;
 	list_add_tail(&rule_mem->list, &nic_rule->rule_members_list);
 

[PATCH 5.4 162/165] usb: dwc3: gadget: Fix request complete check

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit ea0d762775e20aaff7909a3f0866ff1688b1c618 upstream.

We can only check for IN direction if the request had completed. For OUT
direction, it's perfectly fine that the host can send less than the
setup length. Let's return true fall all cases of OUT direction.

Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Link: https://lore.kernel.org/r/ac5a3593a94fdaa3d92e6352356b5f7a01ccdc7c.1576291140.git.thinhn@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2467,6 +2467,13 @@ static int dwc3_gadget_ep_reclaim_trb_li
 
 static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
 {
+	/*
+	 * For OUT direction, host may send less than the setup
+	 * length. Return true for all OUT requests.
+	 */
+	if (!req->direction)
+		return true;
+
 	return req->request.actual == req->request.length;
 }
 

[PATCH 5.4 163/165] USB: core: fix check for duplicate endpoints

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3e4f8e21c4f27bcf30a48486b9dcc269512b79ff upstream.

Amend the endpoint-descriptor sanity checks to detect all duplicate
endpoint addresses in a configuration.

Commit 0a8fd1346254 ("USB: fix problems with duplicate endpoint
addresses") added a check for duplicate endpoint addresses within a
single alternate setting, but did not look for duplicate addresses in
other interfaces.

The current check would also not detect all duplicate addresses when one
endpoint is as a (bi-directional) control endpoint.

This specifically avoids overwriting the endpoint entries in struct
usb_device when enabling a duplicate endpoint, something which could
potentially lead to crashes or leaks, for example, when endpoints are
later disabled.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |   70 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -203,9 +203,58 @@ static const unsigned short super_speed_
 	[USB_ENDPOINT_XFER_INT] = 1024,
 };
 
-static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
-    int asnum, struct usb_host_interface *ifp, int num_ep,
-    unsigned char *buffer, int size)
+static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1,
+		struct usb_endpoint_descriptor *e2)
+{
+	if (e1->bEndpointAddress == e2->bEndpointAddress)
+		return true;
+
+	if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) {
+		if (usb_endpoint_num(e1) == usb_endpoint_num(e2))
+			return true;
+	}
+
+	return false;
+}
+
+/*
+ * Check for duplicate endpoint addresses in other interfaces and in the
+ * altsetting currently being parsed.
+ */
+static bool config_endpoint_is_duplicate(struct usb_host_config *config,
+		int inum, int asnum, struct usb_endpoint_descriptor *d)
+{
+	struct usb_endpoint_descriptor *epd;
+	struct usb_interface_cache *intfc;
+	struct usb_host_interface *alt;
+	int i, j, k;
+
+	for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+		intfc = config->intf_cache[i];
+
+		for (j = 0; j < intfc->num_altsetting; ++j) {
+			alt = &intfc->altsetting[j];
+
+			if (alt->desc.bInterfaceNumber == inum &&
+					alt->desc.bAlternateSetting != asnum)
+				continue;
+
+			for (k = 0; k < alt->desc.bNumEndpoints; ++k) {
+				epd = &alt->endpoint[k].desc;
+
+				if (endpoint_is_duplicate(epd, d))
+					return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+static int usb_parse_endpoint(struct device *ddev, int cfgno,
+		struct usb_host_config *config, int inum, int asnum,
+		struct usb_host_interface *ifp, int num_ep,
+		unsigned char *buffer, int size)
 {
 	unsigned char *buffer0 = buffer;
 	struct usb_endpoint_descriptor *d;
@@ -242,13 +291,10 @@ static int usb_parse_endpoint(struct dev
 		goto skip_to_next_endpoint_or_interface_descriptor;
 
 	/* Check for duplicate endpoint addresses */
-	for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
-		if (ifp->endpoint[i].desc.bEndpointAddress ==
-		    d->bEndpointAddress) {
-			dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
-			    cfgno, inum, asnum, d->bEndpointAddress);
-			goto skip_to_next_endpoint_or_interface_descriptor;
-		}
+	if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
+		dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+				cfgno, inum, asnum, d->bEndpointAddress);
+		goto skip_to_next_endpoint_or_interface_descriptor;
 	}
 
 	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
@@ -522,8 +568,8 @@ static int usb_parse_interface(struct de
 		if (((struct usb_descriptor_header *) buffer)->bDescriptorType
 		     == USB_DT_INTERFACE)
 			break;
-		retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
-		    num_ep, buffer, size);
+		retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum,
+				alt, num_ep, buffer, size);
 		if (retval < 0)
 			return retval;
 		++n;

[PATCH 5.4 164/165] USB: serial: option: add Telit ME910G1 0x110a composition

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit 0d3010fa442429f8780976758719af05592ff19f upstream.

This patch adds the following Telit ME910G1 composition:

0x110a: tty, tty, tty, rmnet

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1172,6 +1172,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff),	/* Telit ME910 (ECM) */
 	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff),	/* Telit ME910G1 */
+	  .driver_info = NCTRL(0) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

[PATCH 5.4 165/165] usb: missing parentheses in USE_NEW_SCHEME

[Greg Kroah-Hartman]

From: Qi Zhou <atmgnd@outlook.com>

commit 1530f6f5f5806b2abbf2a9276c0db313ae9a0e09 upstream.

According to bd0e6c9614b9 ("usb: hub: try old enumeration scheme first
for high speed devices") the kernel will try the old enumeration scheme
first for high speed devices.  This can happen when a high speed device
is plugged in.

But due to missing parentheses in the USE_NEW_SCHEME define, this logic
can get messed up and the incorrect result happens.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qi Zhou <atmgnd@outlook.com>
Link: https://lore.kernel.org/r/ht4mtag8ZP-HKEhD0KkJhcFnVlOFV8N8eNjJVRD9pDkkLUNhmEo8_cL_sl7xy9mdajdH-T8J3TFQsjvoYQT61NFjQXy469Ed_BbBw_x4S1E=@protonmail.com
[ fixup changelog text - gregkh]
Cc: stable <stable@vger.kernel.org>
Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2691,7 +2691,7 @@ static unsigned hub_is_wusb(struct usb_h
 #define SET_ADDRESS_TRIES	2
 #define GET_DESCRIPTOR_TRIES	2
 #define SET_CONFIG_TRIES	(2 * (use_both_schemes + 1))
-#define USE_NEW_SCHEME(i, scheme)	((i) / 2 == (int)scheme)
+#define USE_NEW_SCHEME(i, scheme)	((i) / 2 == (int)(scheme))
 
 #define HUB_ROOT_RESET_TIME	60	/* times are in msec */
 #define HUB_SHORT_RESET_TIME	10

Re: [PATCH 5.4 000/165] 5.4.11-stable review

[Guenter Roeck]

On 1/11/20 1:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.11 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 386 pass: 386 fail: 0

Guenter

Re: [PATCH 5.4 000/165] 5.4.11-stable review

[Naresh Kamboju]

On Sat, 11 Jan 2020 at 15:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.11 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.11-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.11-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: ed7e2ecd1b93e8f35aa93d1bd185bf9a4ad1e1dd
git describe: v5.4.10-166-ged7e2ecd1b93
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.10-166-ged7e2ecd1b93

No regressions (compared to build v5.4.10)

No fixes (compared to build v5.4.10)

Ran 22721 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-mm-tests
* ltp-open-posix-tests
* ltp-syscalls-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/165] 5.4.11-stable review

[Jeffrin Jose]

On Sat, Jan 11, 2020 at 10:48:39AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.11 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.11-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 

compiled and booted 5.4.11-rc1+ . no regression according to "sudo dmesg -l err"


--
software engineer
rajagiri school of engineering and technology

Re: [PATCH 5.4 000/165] 5.4.11-stable review

[Jon Hunter]

On 11/01/2020 09:48, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.11 release.
> There are 165 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.11-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------

All tests are passing for Tegra ...

Test results for stable-v5.4:
    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version:	5.4.11-g9d61432efb21
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 000/165] 5.4.11-stable review

[Greg Kroah-Hartman]

On Mon, Jan 13, 2020 at 03:49:01PM +0000, Jon Hunter wrote:
> 
> On 11/01/2020 09:48, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.11 release.
> > There are 165 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Mon, 13 Jan 2020 09:46:17 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.11-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> 
> All tests are passing for Tegra ...
> 
> Test results for stable-v5.4:
>     13 builds:	13 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     38 tests:	38 pass, 0 fail
> 
> Linux version:	5.4.11-g9d61432efb21
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04
> 

Thanks for testing all of these and letting me know.

greg k-h