[PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels

[PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels

[Jitao Shi]

Changes since v8:
 - merge the panel documents to one.
 - delay move the drm_panel_of_backlight after drm_panel_init

Changes since v7:
 - base drm-misc-next branch
 - fix document pass dt_binding_check
 - remove backlight from panel driver

Changes since v6:
 - fix boe_panel_init err uninit.
 - adjust the delay of backlight on.

Changes since v5:
 - covert the documents to yaml
 - fine tune boe, tv101wum-n53 panel video timine

Changes since v4:
 - add auo,b101uan08.3 panel for this driver.
 - add boe,tv101wum-n53 panel for this driver.

Changes since v3:
 - remove check enable_gpio.
 - fine tune the auo,kd101n80-45na panel's power on timing.

Changes since v2:
 - correct the panel size
 - remove blank line in Kconfig
 - move auo,kd101n80-45na panel driver in this series.

Changes since v1:
 - update typo nl6 -> n16.
 - update new panel config and makefile are added in alphabetically order.
 - add the panel mode and panel info in driver data.
 - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver

Jitao Shi (5):
  dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings
  drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel
  drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel
  drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel
  drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel

 .../display/panel/boe,tv101wum-nl6.yaml       |  81 ++
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 854 ++++++++++++++++++
 4 files changed, 945 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

-- 
2.21.0

[PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings

[Jitao Shi]

Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
"boe,tv101wum-n53" and "auo,b101uan08.3" panels.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../display/panel/boe,tv101wum-nl6.yaml       | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 000000000000..cc4e058f5eee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-nl6
+        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+      - auo,kd101n80-45na
+        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-n53
+        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+      - auo,b101uan08.3
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+  port: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.21.0

[PATCH v9 2/5] drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel

[Jitao Shi]

Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 693 ++++++++++++++++++
 3 files changed, 703 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ae44ac2ec106..ca727c233a9a 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -29,6 +29,15 @@ config DRM_PANEL_BOE_HIMAX8279D
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
+config DRM_PANEL_BOE_TV101WUM_NL6
+	tristate "BOE TV101WUM 1200x1920 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
+	  DSI Video Mode panel
+
 config DRM_PANEL_LVDS
 	tristate "Generic LVDS panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7c4d3c581fd4..a659ce403d0e 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
+obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
new file mode 100644
index 000000000000..51fde588adc1
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jitao Shi <jitao.shi@mediatek.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct panel_desc {
+	const struct drm_display_mode *modes;
+	unsigned int bpc;
+
+	/**
+	 * @width_mm: width of the panel's active display area
+	 * @height_mm: height of the panel's active display area
+	 */
+	struct {
+		unsigned int width_mm;
+		unsigned int height_mm;
+	} size;
+
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+	const struct panel_init_cmd *init_cmds;
+	unsigned int lanes;
+};
+
+struct boe_panel {
+	struct drm_panel base;
+	struct mipi_dsi_device *dsi;
+
+	const struct panel_desc *desc;
+
+	struct regulator *pp1800;
+	struct regulator *avee;
+	struct regulator *avdd;
+	struct gpio_desc *enable_gpio;
+
+	bool prepared;
+};
+
+enum dsi_cmd_type {
+	INIT_DCS_CMD,
+	DELAY_CMD,
+};
+
+struct panel_init_cmd {
+	enum dsi_cmd_type type;
+	size_t len;
+	const char *data;
+};
+
+#define _INIT_DCS_CMD(...) { \
+	.type = INIT_DCS_CMD, \
+	.len = sizeof((char[]){__VA_ARGS__}), \
+	.data = (char[]){__VA_ARGS__} }
+
+#define _INIT_DELAY_CMD(...) { \
+	.type = DELAY_CMD,\
+	.len = sizeof((char[]){__VA_ARGS__}), \
+	.data = (char[]){__VA_ARGS__} }
+
+static const struct panel_init_cmd boe_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0xB0, 0x05),
+	_INIT_DCS_CMD(0xB1, 0xE5),
+	_INIT_DCS_CMD(0xB3, 0x52),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB3, 0x88),
+	_INIT_DCS_CMD(0xB0, 0x04),
+	_INIT_DCS_CMD(0xB8, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB6, 0x03),
+	_INIT_DCS_CMD(0xBA, 0x8B),
+	_INIT_DCS_CMD(0xBF, 0x1A),
+	_INIT_DCS_CMD(0xC0, 0x0F),
+	_INIT_DCS_CMD(0xC2, 0x0C),
+	_INIT_DCS_CMD(0xC3, 0x02),
+	_INIT_DCS_CMD(0xC4, 0x0C),
+	_INIT_DCS_CMD(0xC5, 0x02),
+	_INIT_DCS_CMD(0xB0, 0x01),
+	_INIT_DCS_CMD(0xE0, 0x26),
+	_INIT_DCS_CMD(0xE1, 0x26),
+	_INIT_DCS_CMD(0xDC, 0x00),
+	_INIT_DCS_CMD(0xDD, 0x00),
+	_INIT_DCS_CMD(0xCC, 0x26),
+	_INIT_DCS_CMD(0xCD, 0x26),
+	_INIT_DCS_CMD(0xC8, 0x00),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xD2, 0x03),
+	_INIT_DCS_CMD(0xD3, 0x03),
+	_INIT_DCS_CMD(0xE6, 0x04),
+	_INIT_DCS_CMD(0xE7, 0x04),
+	_INIT_DCS_CMD(0xC4, 0x09),
+	_INIT_DCS_CMD(0xC5, 0x09),
+	_INIT_DCS_CMD(0xD8, 0x0A),
+	_INIT_DCS_CMD(0xD9, 0x0A),
+	_INIT_DCS_CMD(0xC2, 0x0B),
+	_INIT_DCS_CMD(0xC3, 0x0B),
+	_INIT_DCS_CMD(0xD6, 0x0C),
+	_INIT_DCS_CMD(0xD7, 0x0C),
+	_INIT_DCS_CMD(0xC0, 0x05),
+	_INIT_DCS_CMD(0xC1, 0x05),
+	_INIT_DCS_CMD(0xD4, 0x06),
+	_INIT_DCS_CMD(0xD5, 0x06),
+	_INIT_DCS_CMD(0xCA, 0x07),
+	_INIT_DCS_CMD(0xCB, 0x07),
+	_INIT_DCS_CMD(0xDE, 0x08),
+	_INIT_DCS_CMD(0xDF, 0x08),
+	_INIT_DCS_CMD(0xB0, 0x02),
+	_INIT_DCS_CMD(0xC0, 0x00),
+	_INIT_DCS_CMD(0xC1, 0x0D),
+	_INIT_DCS_CMD(0xC2, 0x17),
+	_INIT_DCS_CMD(0xC3, 0x26),
+	_INIT_DCS_CMD(0xC4, 0x31),
+	_INIT_DCS_CMD(0xC5, 0x1C),
+	_INIT_DCS_CMD(0xC6, 0x2C),
+	_INIT_DCS_CMD(0xC7, 0x33),
+	_INIT_DCS_CMD(0xC8, 0x31),
+	_INIT_DCS_CMD(0xC9, 0x37),
+	_INIT_DCS_CMD(0xCA, 0x37),
+	_INIT_DCS_CMD(0xCB, 0x37),
+	_INIT_DCS_CMD(0xCC, 0x39),
+	_INIT_DCS_CMD(0xCD, 0x2E),
+	_INIT_DCS_CMD(0xCE, 0x2F),
+	_INIT_DCS_CMD(0xCF, 0x2F),
+	_INIT_DCS_CMD(0xD0, 0x07),
+	_INIT_DCS_CMD(0xD2, 0x00),
+	_INIT_DCS_CMD(0xD3, 0x0D),
+	_INIT_DCS_CMD(0xD4, 0x17),
+	_INIT_DCS_CMD(0xD5, 0x26),
+	_INIT_DCS_CMD(0xD6, 0x31),
+	_INIT_DCS_CMD(0xD7, 0x3F),
+	_INIT_DCS_CMD(0xD8, 0x3F),
+	_INIT_DCS_CMD(0xD9, 0x3F),
+	_INIT_DCS_CMD(0xDA, 0x3F),
+	_INIT_DCS_CMD(0xDB, 0x37),
+	_INIT_DCS_CMD(0xDC, 0x37),
+	_INIT_DCS_CMD(0xDD, 0x37),
+	_INIT_DCS_CMD(0xDE, 0x39),
+	_INIT_DCS_CMD(0xDF, 0x2E),
+	_INIT_DCS_CMD(0xE0, 0x2F),
+	_INIT_DCS_CMD(0xE1, 0x2F),
+	_INIT_DCS_CMD(0xE2, 0x07),
+	_INIT_DCS_CMD(0xB0, 0x03),
+	_INIT_DCS_CMD(0xC8, 0x0B),
+	_INIT_DCS_CMD(0xC9, 0x07),
+	_INIT_DCS_CMD(0xC3, 0x00),
+	_INIT_DCS_CMD(0xE7, 0x00),
+	_INIT_DCS_CMD(0xC5, 0x2A),
+	_INIT_DCS_CMD(0xDE, 0x2A),
+	_INIT_DCS_CMD(0xCA, 0x43),
+	_INIT_DCS_CMD(0xC9, 0x07),
+	_INIT_DCS_CMD(0xE4, 0xC0),
+	_INIT_DCS_CMD(0xE5, 0x0D),
+	_INIT_DCS_CMD(0xCB, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x06),
+	_INIT_DCS_CMD(0xB8, 0xA5),
+	_INIT_DCS_CMD(0xC0, 0xA5),
+	_INIT_DCS_CMD(0xC7, 0x0F),
+	_INIT_DCS_CMD(0xD5, 0x32),
+	_INIT_DCS_CMD(0xB8, 0x00),
+	_INIT_DCS_CMD(0xC0, 0x00),
+	_INIT_DCS_CMD(0xBC, 0x00),
+	_INIT_DCS_CMD(0xB0, 0x07),
+	_INIT_DCS_CMD(0xB1, 0x00),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x0F),
+	_INIT_DCS_CMD(0xB4, 0x25),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4E),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x97),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x22),
+	_INIT_DCS_CMD(0xBB, 0xA4),
+	_INIT_DCS_CMD(0xBC, 0x2B),
+	_INIT_DCS_CMD(0xBD, 0x2F),
+	_INIT_DCS_CMD(0xBE, 0xA9),
+	_INIT_DCS_CMD(0xBF, 0x25),
+	_INIT_DCS_CMD(0xC0, 0x61),
+	_INIT_DCS_CMD(0xC1, 0x97),
+	_INIT_DCS_CMD(0xC2, 0xB2),
+	_INIT_DCS_CMD(0xC3, 0xCD),
+	_INIT_DCS_CMD(0xC4, 0xD9),
+	_INIT_DCS_CMD(0xC5, 0xE7),
+	_INIT_DCS_CMD(0xC6, 0xF4),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x08),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x05),
+	_INIT_DCS_CMD(0xB3, 0x11),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x98),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x23),
+	_INIT_DCS_CMD(0xBB, 0xA6),
+	_INIT_DCS_CMD(0xBC, 0x2C),
+	_INIT_DCS_CMD(0xBD, 0x30),
+	_INIT_DCS_CMD(0xBE, 0xAA),
+	_INIT_DCS_CMD(0xBF, 0x26),
+	_INIT_DCS_CMD(0xC0, 0x62),
+	_INIT_DCS_CMD(0xC1, 0x9B),
+	_INIT_DCS_CMD(0xC2, 0xB5),
+	_INIT_DCS_CMD(0xC3, 0xCF),
+	_INIT_DCS_CMD(0xC4, 0xDB),
+	_INIT_DCS_CMD(0xC5, 0xE8),
+	_INIT_DCS_CMD(0xC6, 0xF5),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x09),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x16),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x3B),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x73),
+	_INIT_DCS_CMD(0xB8, 0x99),
+	_INIT_DCS_CMD(0xB9, 0xE0),
+	_INIT_DCS_CMD(0xBA, 0x26),
+	_INIT_DCS_CMD(0xBB, 0xAD),
+	_INIT_DCS_CMD(0xBC, 0x36),
+	_INIT_DCS_CMD(0xBD, 0x3A),
+	_INIT_DCS_CMD(0xBE, 0xAE),
+	_INIT_DCS_CMD(0xBF, 0x2A),
+	_INIT_DCS_CMD(0xC0, 0x66),
+	_INIT_DCS_CMD(0xC1, 0x9E),
+	_INIT_DCS_CMD(0xC2, 0xB8),
+	_INIT_DCS_CMD(0xC3, 0xD1),
+	_INIT_DCS_CMD(0xC4, 0xDD),
+	_INIT_DCS_CMD(0xC5, 0xE9),
+	_INIT_DCS_CMD(0xC6, 0xF6),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0A),
+	_INIT_DCS_CMD(0xB1, 0x00),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x0F),
+	_INIT_DCS_CMD(0xB4, 0x25),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4E),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x97),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x22),
+	_INIT_DCS_CMD(0xBB, 0xA4),
+	_INIT_DCS_CMD(0xBC, 0x2B),
+	_INIT_DCS_CMD(0xBD, 0x2F),
+	_INIT_DCS_CMD(0xBE, 0xA9),
+	_INIT_DCS_CMD(0xBF, 0x25),
+	_INIT_DCS_CMD(0xC0, 0x61),
+	_INIT_DCS_CMD(0xC1, 0x97),
+	_INIT_DCS_CMD(0xC2, 0xB2),
+	_INIT_DCS_CMD(0xC3, 0xCD),
+	_INIT_DCS_CMD(0xC4, 0xD9),
+	_INIT_DCS_CMD(0xC5, 0xE7),
+	_INIT_DCS_CMD(0xC6, 0xF4),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0B),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x05),
+	_INIT_DCS_CMD(0xB3, 0x11),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x39),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x72),
+	_INIT_DCS_CMD(0xB8, 0x98),
+	_INIT_DCS_CMD(0xB9, 0xDC),
+	_INIT_DCS_CMD(0xBA, 0x23),
+	_INIT_DCS_CMD(0xBB, 0xA6),
+	_INIT_DCS_CMD(0xBC, 0x2C),
+	_INIT_DCS_CMD(0xBD, 0x30),
+	_INIT_DCS_CMD(0xBE, 0xAA),
+	_INIT_DCS_CMD(0xBF, 0x26),
+	_INIT_DCS_CMD(0xC0, 0x62),
+	_INIT_DCS_CMD(0xC1, 0x9B),
+	_INIT_DCS_CMD(0xC2, 0xB5),
+	_INIT_DCS_CMD(0xC3, 0xCF),
+	_INIT_DCS_CMD(0xC4, 0xDB),
+	_INIT_DCS_CMD(0xC5, 0xE8),
+	_INIT_DCS_CMD(0xC6, 0xF5),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x0C),
+	_INIT_DCS_CMD(0xB1, 0x04),
+	_INIT_DCS_CMD(0xB2, 0x02),
+	_INIT_DCS_CMD(0xB3, 0x16),
+	_INIT_DCS_CMD(0xB4, 0x24),
+	_INIT_DCS_CMD(0xB5, 0x3B),
+	_INIT_DCS_CMD(0xB6, 0x4F),
+	_INIT_DCS_CMD(0xB7, 0x73),
+	_INIT_DCS_CMD(0xB8, 0x99),
+	_INIT_DCS_CMD(0xB9, 0xE0),
+	_INIT_DCS_CMD(0xBA, 0x26),
+	_INIT_DCS_CMD(0xBB, 0xAD),
+	_INIT_DCS_CMD(0xBC, 0x36),
+	_INIT_DCS_CMD(0xBD, 0x3A),
+	_INIT_DCS_CMD(0xBE, 0xAE),
+	_INIT_DCS_CMD(0xBF, 0x2A),
+	_INIT_DCS_CMD(0xC0, 0x66),
+	_INIT_DCS_CMD(0xC1, 0x9E),
+	_INIT_DCS_CMD(0xC2, 0xB8),
+	_INIT_DCS_CMD(0xC3, 0xD1),
+	_INIT_DCS_CMD(0xC4, 0xDD),
+	_INIT_DCS_CMD(0xC5, 0xE9),
+	_INIT_DCS_CMD(0xC6, 0xF6),
+	_INIT_DCS_CMD(0xC7, 0xFA),
+	_INIT_DCS_CMD(0xC8, 0xFC),
+	_INIT_DCS_CMD(0xC9, 0x00),
+	_INIT_DCS_CMD(0xCA, 0x00),
+	_INIT_DCS_CMD(0xCB, 0x16),
+	_INIT_DCS_CMD(0xCC, 0xAF),
+	_INIT_DCS_CMD(0xCD, 0xFF),
+	_INIT_DCS_CMD(0xCE, 0xFF),
+	_INIT_DCS_CMD(0xB0, 0x00),
+	_INIT_DCS_CMD(0xB3, 0x08),
+	_INIT_DCS_CMD(0xB0, 0x04),
+	_INIT_DCS_CMD(0xB8, 0x68),
+	_INIT_DELAY_CMD(150),
+	{},
+};
+
+static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct boe_panel, base);
+}
+
+static int boe_panel_init_dcs_cmd(struct boe_panel *boe)
+{
+	struct mipi_dsi_device *dsi = boe->dsi;
+	struct drm_panel *panel = &boe->base;
+	int i, err = 0;
+
+	if (boe->desc->init_cmds) {
+		const struct panel_init_cmd *init_cmds = boe->desc->init_cmds;
+
+		for (i = 0; init_cmds[i].len != 0; i++) {
+			const struct panel_init_cmd *cmd = &init_cmds[i];
+
+			switch (cmd->type) {
+			case DELAY_CMD:
+				msleep(cmd->data[0]);
+				err = 0;
+				break;
+
+			case INIT_DCS_CMD:
+				err = mipi_dsi_dcs_write(dsi, cmd->data[0],
+							 cmd->len <= 1 ? NULL :
+							 &cmd->data[1],
+							 cmd->len - 1);
+				break;
+
+			default:
+				err = -EINVAL;
+			}
+
+			if (err < 0) {
+				dev_err(panel->dev,
+					"failed to write command %u\n", i);
+				return err;
+			}
+		}
+	}
+	return 0;
+}
+
+static int boe_panel_enter_sleep_mode(struct boe_panel *boe)
+{
+	struct mipi_dsi_device *dsi = boe->dsi;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int boe_panel_unprepare(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	int ret;
+
+	if (!boe->prepared)
+		return 0;
+
+	ret = boe_panel_enter_sleep_mode(boe);
+	if (ret < 0) {
+		dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+		return ret;
+	}
+
+	msleep(150);
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(500, 1000);
+	regulator_disable(boe->avee);
+	regulator_disable(boe->avdd);
+	usleep_range(5000, 7000);
+	regulator_disable(boe->pp1800);
+
+	boe->prepared = false;
+
+	return 0;
+}
+
+static int boe_panel_prepare(struct drm_panel *panel)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	int ret;
+
+	if (boe->prepared)
+		return 0;
+
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(1000, 1500);
+
+	ret = regulator_enable(boe->pp1800);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 5000);
+
+	ret = regulator_enable(boe->avdd);
+	if (ret < 0)
+		goto poweroff1v8;
+	ret = regulator_enable(boe->avee);
+	if (ret < 0)
+		goto poweroffavdd;
+
+	usleep_range(5000, 10000);
+
+	gpiod_set_value(boe->enable_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value(boe->enable_gpio, 0);
+	usleep_range(1000, 2000);
+	gpiod_set_value(boe->enable_gpio, 1);
+	usleep_range(6000, 10000);
+
+	ret = boe_panel_init_dcs_cmd(boe);
+	if (ret < 0) {
+		dev_err(panel->dev, "failed to init panel: %d\n", ret);
+		goto poweroff;
+	}
+
+	boe->prepared = true;
+
+	return 0;
+
+poweroff:
+	regulator_disable(boe->avee);
+poweroffavdd:
+	regulator_disable(boe->avdd);
+poweroff1v8:
+	usleep_range(5000, 7000);
+	regulator_disable(boe->pp1800);
+	gpiod_set_value(boe->enable_gpio, 0);
+
+	return ret;
+}
+
+static int boe_panel_enable(struct drm_panel *panel)
+{
+	msleep(130);
+	return 0;
+}
+
+static const struct drm_display_mode boe_tv101wum_nl6_default_mode = {
+	.clock = 159425,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 100,
+	.hsync_end = 1200 + 100 + 40,
+	.htotal = 1200 + 100 + 40 + 24,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 10,
+	.vsync_end = 1920 + 10 + 14,
+	.vtotal = 1920 + 10 + 14 + 4,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc boe_tv101wum_nl6_desc = {
+	.modes = &boe_tv101wum_nl6_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = boe_init_cmd,
+};
+
+static int boe_panel_get_modes(struct drm_panel *panel,
+			       struct drm_connector *connector)
+{
+	struct boe_panel *boe = to_boe_panel(panel);
+	const struct drm_display_mode *m = boe->desc->modes;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, m);
+	if (!mode) {
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+			m->hdisplay, m->vdisplay, m->vrefresh);
+		return -ENOMEM;
+	}
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = boe->desc->size.width_mm;
+	connector->display_info.height_mm = boe->desc->size.height_mm;
+	connector->display_info.bpc = boe->desc->bpc;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs boe_panel_funcs = {
+	.unprepare = boe_panel_unprepare,
+	.prepare = boe_panel_prepare,
+	.enable = boe_panel_enable,
+	.get_modes = boe_panel_get_modes,
+};
+
+static int boe_panel_add(struct boe_panel *boe)
+{
+	struct device *dev = &boe->dsi->dev;
+	int err;
+
+	boe->avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(boe->avdd))
+		return PTR_ERR(boe->avdd);
+
+	boe->avee = devm_regulator_get(dev, "avee");
+	if (IS_ERR(boe->avee))
+		return PTR_ERR(boe->avee);
+
+	boe->pp1800 = devm_regulator_get(dev, "pp1800");
+	if (IS_ERR(boe->pp1800))
+		return PTR_ERR(boe->pp1800);
+
+	boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(boe->enable_gpio)) {
+		dev_err(dev, "cannot get reset-gpios %ld\n",
+			PTR_ERR(boe->enable_gpio));
+		return PTR_ERR(boe->enable_gpio);
+	}
+
+	gpiod_set_value(boe->enable_gpio, 0);
+
+	drm_panel_init(&boe->base, dev, &boe_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	err = drm_panel_of_backlight(&boe->base);
+	if (err)
+		return err;
+
+	boe->base.funcs = &boe_panel_funcs;
+	boe->base.dev = &boe->dsi->dev;
+
+	return drm_panel_add(&boe->base);
+}
+
+static int boe_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe;
+	int ret;
+	const struct panel_desc *desc;
+
+	boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL);
+	if (!boe)
+		return -ENOMEM;
+
+	desc = of_device_get_match_data(&dsi->dev);
+	dsi->lanes = desc->lanes;
+	dsi->format = desc->format;
+	dsi->mode_flags = desc->mode_flags;
+	boe->desc = desc;
+	boe->dsi = dsi;
+	ret = boe_panel_add(boe);
+	if (ret < 0)
+		return ret;
+
+	mipi_dsi_set_drvdata(dsi, boe);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret)
+		drm_panel_remove(&boe->base);
+
+	return ret;
+}
+
+static void boe_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+
+	drm_panel_disable(&boe->base);
+	drm_panel_unprepare(&boe->base);
+}
+
+static int boe_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	boe_panel_shutdown(dsi);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+	if (boe->base.dev)
+		drm_panel_remove(&boe->base);
+
+	return 0;
+}
+
+static const struct of_device_id boe_of_match[] = {
+	{ .compatible = "boe,tv101wum-nl6",
+	  .data = &boe_tv101wum_nl6_desc
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_of_match);
+
+static struct mipi_dsi_driver boe_panel_driver = {
+	.driver = {
+		.name = "panel-boe-tv101wum-nl6",
+		.of_match_table = boe_of_match,
+	},
+	.probe = boe_panel_probe,
+	.remove = boe_panel_remove,
+	.shutdown = boe_panel_shutdown,
+};
+module_mipi_dsi_driver(boe_panel_driver);
+
+MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>");
+MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver");
+MODULE_LICENSE("GPL v2");
-- 
2.21.0

[PATCH v9 3/5] drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel

[Jitao Shi]

Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 drivers/gpu/drm/panel/Kconfig                 |  6 +-
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 64 +++++++++++++++++--
 2 files changed, 61 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ca727c233a9a..b5413edd625b 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -30,13 +30,13 @@ config DRM_PANEL_BOE_HIMAX8279D
 	  the host and has a built-in LED backlight.
 
 config DRM_PANEL_BOE_TV101WUM_NL6
-	tristate "BOE TV101WUM 1200x1920 panel"
+	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
 	depends on OF
 	depends on DRM_MIPI_DSI
 	depends on BACKLIGHT_CLASS_DEVICE
 	help
-	  Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
-	  DSI Video Mode panel
+	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+	  45NA WUXGA PANEL DSI Video Mode panel
 
 config DRM_PANEL_LVDS
 	tristate "Generic LVDS panel driver"
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 51fde588adc1..2160144ca51b 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -34,6 +34,7 @@ struct panel_desc {
 	enum mipi_dsi_pixel_format format;
 	const struct panel_init_cmd *init_cmds;
 	unsigned int lanes;
+	bool discharge_on_disable;
 };
 
 struct boe_panel {
@@ -367,6 +368,15 @@ static const struct panel_init_cmd boe_init_cmd[] = {
 	{},
 };
 
+static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0x11),
+	_INIT_DELAY_CMD(120),
+	_INIT_DCS_CMD(0x29),
+	_INIT_DELAY_CMD(120),
+	{},
+};
+
 static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
 {
 	return container_of(panel, struct boe_panel, base);
@@ -444,12 +454,22 @@ static int boe_panel_unprepare(struct drm_panel *panel)
 	}
 
 	msleep(150);
-	gpiod_set_value(boe->enable_gpio, 0);
-	usleep_range(500, 1000);
-	regulator_disable(boe->avee);
-	regulator_disable(boe->avdd);
-	usleep_range(5000, 7000);
-	regulator_disable(boe->pp1800);
+
+	if (boe->desc->discharge_on_disable) {
+		regulator_disable(boe->avee);
+		regulator_disable(boe->avdd);
+		usleep_range(5000, 7000);
+		gpiod_set_value(boe->enable_gpio, 0);
+		usleep_range(5000, 7000);
+		regulator_disable(boe->pp1800);
+	} else {
+		gpiod_set_value(boe->enable_gpio, 0);
+		usleep_range(500, 1000);
+		regulator_disable(boe->avee);
+		regulator_disable(boe->avdd);
+		usleep_range(5000, 7000);
+		regulator_disable(boe->pp1800);
+	}
 
 	boe->prepared = false;
 
@@ -542,6 +562,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = {
 	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 		      MIPI_DSI_MODE_LPM,
 	.init_cmds = boe_init_cmd,
+	.discharge_on_disable = false,
+};
+
+static const struct drm_display_mode auo_kd101n80_45na_default_mode = {
+	.clock = 157000,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 80,
+	.hsync_end = 1200 + 80 + 24,
+	.htotal = 1200 + 80 + 24 + 36,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 16,
+	.vsync_end = 1920 + 16 + 4,
+	.vtotal = 1920 + 16 + 4 + 16,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc auo_kd101n80_45na_desc = {
+	.modes = &auo_kd101n80_45na_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = auo_kd101n80_45na_init_cmd,
+	.discharge_on_disable = true,
 };
 
 static int boe_panel_get_modes(struct drm_panel *panel,
@@ -673,6 +722,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "boe,tv101wum-nl6",
 	  .data = &boe_tv101wum_nl6_desc
 	},
+	{ .compatible = "auo,kd101n80-45na",
+	  .data = &auo_kd101n80_45na_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

[PATCH v9 4/5] drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel

[Jitao Shi]

Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 2160144ca51b..e77ea577d93a 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -593,6 +593,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = {
 	.discharge_on_disable = true,
 };
 
+static const struct drm_display_mode boe_tv101wum_n53_default_mode = {
+	.clock = 159916,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 80,
+	.hsync_end = 1200 + 80 + 24,
+	.htotal = 1200 + 80 + 24 + 40,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 20,
+	.vsync_end = 1920 + 20 + 4,
+	.vtotal = 1920 + 20 + 4 + 10,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc boe_tv101wum_n53_desc = {
+	.modes = &boe_tv101wum_n53_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = boe_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel,
 			       struct drm_connector *connector)
 {
@@ -725,6 +753,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "auo,kd101n80-45na",
 	  .data = &auo_kd101n80_45na_desc
 	},
+	{ .compatible = "boe,tv101wum-n53",
+	  .data = &boe_tv101wum_n53_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

[PATCH v9 5/5] drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel

[Jitao Shi]

Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index e77ea577d93a..01faf8597700 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -377,6 +377,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
 	{},
 };
 
+static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0xB0, 0x01),
+	_INIT_DCS_CMD(0xC0, 0x48),
+	_INIT_DCS_CMD(0xC1, 0x48),
+	_INIT_DCS_CMD(0xC2, 0x47),
+	_INIT_DCS_CMD(0xC3, 0x47),
+	_INIT_DCS_CMD(0xC4, 0x46),
+	_INIT_DCS_CMD(0xC5, 0x46),
+	_INIT_DCS_CMD(0xC6, 0x45),
+	_INIT_DCS_CMD(0xC7, 0x45),
+	_INIT_DCS_CMD(0xC8, 0x64),
+	_INIT_DCS_CMD(0xC9, 0x64),
+	_INIT_DCS_CMD(0xCA, 0x4F),
+	_INIT_DCS_CMD(0xCB, 0x4F),
+	_INIT_DCS_CMD(0xCC, 0x40),
+	_INIT_DCS_CMD(0xCD, 0x40),
+	_INIT_DCS_CMD(0xCE, 0x66),
+	_INIT_DCS_CMD(0xCF, 0x66),
+	_INIT_DCS_CMD(0xD0, 0x4F),
+	_INIT_DCS_CMD(0xD1, 0x4F),
+	_INIT_DCS_CMD(0xD2, 0x41),
+	_INIT_DCS_CMD(0xD3, 0x41),
+	_INIT_DCS_CMD(0xD4, 0x48),
+	_INIT_DCS_CMD(0xD5, 0x48),
+	_INIT_DCS_CMD(0xD6, 0x47),
+	_INIT_DCS_CMD(0xD7, 0x47),
+	_INIT_DCS_CMD(0xD8, 0x46),
+	_INIT_DCS_CMD(0xD9, 0x46),
+	_INIT_DCS_CMD(0xDA, 0x45),
+	_INIT_DCS_CMD(0xDB, 0x45),
+	_INIT_DCS_CMD(0xDC, 0x64),
+	_INIT_DCS_CMD(0xDD, 0x64),
+	_INIT_DCS_CMD(0xDE, 0x4F),
+	_INIT_DCS_CMD(0xDF, 0x4F),
+	_INIT_DCS_CMD(0xE0, 0x40),
+	_INIT_DCS_CMD(0xE1, 0x40),
+	_INIT_DCS_CMD(0xE2, 0x66),
+	_INIT_DCS_CMD(0xE3, 0x66),
+	_INIT_DCS_CMD(0xE4, 0x4F),
+	_INIT_DCS_CMD(0xE5, 0x4F),
+	_INIT_DCS_CMD(0xE6, 0x41),
+	_INIT_DCS_CMD(0xE7, 0x41),
+	_INIT_DELAY_CMD(150),
+	{},
+};
+
 static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
 {
 	return container_of(panel, struct boe_panel, base);
@@ -621,6 +668,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = {
 	.init_cmds = boe_init_cmd,
 };
 
+static const struct drm_display_mode auo_b101uan08_3_default_mode = {
+	.clock = 159667,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 60,
+	.hsync_end = 1200 + 60 + 4,
+	.htotal = 1200 + 60 + 4 + 80,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 34,
+	.vsync_end = 1920 + 34 + 2,
+	.vtotal = 1920 + 34 + 2 + 24,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc auo_b101uan08_3_desc = {
+	.modes = &auo_b101uan08_3_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = auo_b101uan08_3_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel,
 			       struct drm_connector *connector)
 {
@@ -756,6 +831,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "boe,tv101wum-n53",
 	  .data = &boe_tv101wum_n53_desc
 	},
+	{ .compatible = "auo,b101uan08.3",
+	  .data = &auo_b101uan08_3_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0

Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings

[Sam Ravnborg]

Hi Jitao.

Looks good, much better than the individual files.
Rob Herring is still listed as maintainer which I questioned in last
feedback.

With this resolved (kept only if Rob confirms), this is
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote:
> Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
> "boe,tv101wum-n53" and "auo,b101uan08.3" panels.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/boe,tv101wum-nl6.yaml       | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> new file mode 100644
> index 000000000000..cc4e058f5eee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BOE TV101WUM-NL6 DSI Display Panel
> +
> +maintainers:
> +  - Thierry Reding <thierry.reding@gmail.com>
> +  - Sam Ravnborg <sam@ravnborg.org>
> +  - Rob Herring <robh+dt@kernel.org>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
> +      - boe,tv101wum-nl6
> +        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
> +      - auo,kd101n80-45na
> +        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
> +      - boe,tv101wum-n53
> +        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
> +      - auo,b101uan08.3
> +
> +  reg:
> +    description: the virtual channel number of a DSI peripheral
> +
> +  enable-gpios:
> +    description: a GPIO spec for the enable pin
> +
> +  pp1800-supply:
> +    description: core voltage supply
> +
> +  avdd-supply:
> +    description: phandle of the regulator that provides positive voltage
> +
> +  avee-supply:
> +    description: phandle of the regulator that provides negative voltage
> +
> +  backlight:
> +    description: phandle of the backlight device attached to the panel
> +
> +  port: true
> +
> +required:
> + - compatible
> + - reg
> + - enable-gpios
> + - pp1800-supply
> + - avdd-supply
> + - avee-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        panel@0 {
> +            compatible = "boe,tv101wum-nl6";
> +            reg = <0>;
> +            enable-gpios = <&pio 45 0>;
> +            avdd-supply = <&ppvarn_lcd>;
> +            avee-supply = <&ppvarp_lcd>;
> +            pp1800-supply = <&pp1800_lcd>;
> +            backlight = <&backlight_lcd0>;
> +            status = "okay";
> +            port {
> +                panel_in: endpoint {
> +                    remote-endpoint = <&dsi_out>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings

[Sam Ravnborg]

Hi Jitao.

On Fri, Jan 17, 2020 at 07:08:17PM +0100, Sam Ravnborg wrote:
> Hi Jitao.
> 
> Looks good, much better than the individual files.
> Rob Herring is still listed as maintainer which I questioned in last
> feedback.
> 
> With this resolved (kept only if Rob confirms), this is
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Rob confirmed on irc that he is not a dedicated reviewer of this
binding. And furhtermore that it was OK I committed trivial panel
bindings.
Dropepd Rob and applied to drm-misc-next.

	Sam

> 
> On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote:
> > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
> > "boe,tv101wum-n53" and "auo,b101uan08.3" panels.
> > 
> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > ---
> >  .../display/panel/boe,tv101wum-nl6.yaml       | 81 +++++++++++++++++++
> >  1 file changed, 81 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> > new file mode 100644
> > index 000000000000..cc4e058f5eee
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> > @@ -0,0 +1,81 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: BOE TV101WUM-NL6 DSI Display Panel
> > +
> > +maintainers:
> > +  - Thierry Reding <thierry.reding@gmail.com>
> > +  - Sam Ravnborg <sam@ravnborg.org>
> > +  - Rob Herring <robh+dt@kernel.org>
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
> > +      - boe,tv101wum-nl6
> > +        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
> > +      - auo,kd101n80-45na
> > +        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
> > +      - boe,tv101wum-n53
> > +        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
> > +      - auo,b101uan08.3
> > +
> > +  reg:
> > +    description: the virtual channel number of a DSI peripheral
> > +
> > +  enable-gpios:
> > +    description: a GPIO spec for the enable pin
> > +
> > +  pp1800-supply:
> > +    description: core voltage supply
> > +
> > +  avdd-supply:
> > +    description: phandle of the regulator that provides positive voltage
> > +
> > +  avee-supply:
> > +    description: phandle of the regulator that provides negative voltage
> > +
> > +  backlight:
> > +    description: phandle of the backlight device attached to the panel
> > +
> > +  port: true
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - enable-gpios
> > + - pp1800-supply
> > + - avdd-supply
> > + - avee-supply
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    dsi {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        panel@0 {
> > +            compatible = "boe,tv101wum-nl6";
> > +            reg = <0>;
> > +            enable-gpios = <&pio 45 0>;
> > +            avdd-supply = <&ppvarn_lcd>;
> > +            avee-supply = <&ppvarp_lcd>;
> > +            pp1800-supply = <&pp1800_lcd>;
> > +            backlight = <&backlight_lcd0>;
> > +            status = "okay";
> > +            port {
> > +                panel_in: endpoint {
> > +                    remote-endpoint = <&dsi_out>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > -- 
> > 2.21.0
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels

[Sam Ravnborg]

Hi Jitao.

Thanks for your perseverance on this.
With the minor issue on the binding file resolved everything is now fine
and patches are all applied to drm-misc-next.

Thanks,

	Sam

On Thu, Jan 16, 2020 at 10:15:06AM +0800, Jitao Shi wrote:
> Changes since v8:
>  - merge the panel documents to one.
>  - delay move the drm_panel_of_backlight after drm_panel_init
> 
> Changes since v7:
>  - base drm-misc-next branch
>  - fix document pass dt_binding_check
>  - remove backlight from panel driver
> 
> Changes since v6:
>  - fix boe_panel_init err uninit.
>  - adjust the delay of backlight on.
> 
> Changes since v5:
>  - covert the documents to yaml
>  - fine tune boe, tv101wum-n53 panel video timine
> 
> Changes since v4:
>  - add auo,b101uan08.3 panel for this driver.
>  - add boe,tv101wum-n53 panel for this driver.
> 
> Changes since v3:
>  - remove check enable_gpio.
>  - fine tune the auo,kd101n80-45na panel's power on timing.
> 
> Changes since v2:
>  - correct the panel size
>  - remove blank line in Kconfig
>  - move auo,kd101n80-45na panel driver in this series.
> 
> Changes since v1:
>  - update typo nl6 -> n16.
>  - update new panel config and makefile are added in alphabetically order.
>  - add the panel mode and panel info in driver data.
>  - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver
> 
> Jitao Shi (5):
>   dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings
>   drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel
>   drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel
>   drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel
>   drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel
> 
>  .../display/panel/boe,tv101wum-nl6.yaml       |  81 ++
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 854 ++++++++++++++++++
>  4 files changed, 945 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
>  create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> 
> -- 
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel