* [PATCH 0/6] video: fbdev: controlfb: small cleanup
[not found] <CGME20200116140914eucas1p1a62794ad40589e818614176ea8e817ff@eucas1p1.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200116140915eucas1p2d6a2c654a66a78b6c3c1fc710f8a65b8@eucas1p2.samsung.com>
` (6 more replies)
0 siblings, 7 replies; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Hi,
Small cleanup for controlfb driver:
- fix sparse warnings
- remove not working module support
- add COMPILE_TEST support
- remove redundant function prototypes
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
Bartlomiej Zolnierkiewicz (6):
video: fbdev: controlfb: fix sparse warning about using incorrect type
video: fbdev: controlfb: remove obsolete module support
video: fbdev: controlfb: add COMPILE_TEST support
video: fbdev: controlfb: remove function prototypes part #1
video: fbdev: controlfb: remove function prototypes part #2
video: fbdev: controlfb: remove function prototypes part #3
drivers/video/fbdev/Kconfig | 2 +-
drivers/video/fbdev/controlfb.c | 810 +++++++++++++++-----------------
2 files changed, 383 insertions(+), 429 deletions(-)
--
2.24.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/6] video: fbdev: controlfb: fix sparse warning about using incorrect type
[not found] ` <CGME20200116140915eucas1p2d6a2c654a66a78b6c3c1fc710f8a65b8@eucas1p2.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
2020-01-17 19:13 ` Sam Ravnborg
0 siblings, 1 reply; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Force le32_to_cpup() argument to be of proper type (const __le32 *).
Also add missing inline keyword to control_par_to_var() definition
(to match function prototype).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/controlfb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 38b61cdb5ca4..d7e53520a24c 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -313,7 +313,7 @@ static int controlfb_blank(int blank_mode, struct fb_info *info)
container_of(info, struct fb_info_control, info);
unsigned ctrl;
- ctrl = le32_to_cpup(CNTRL_REG(p,ctrl));
+ ctrl = le32_to_cpup((const __force __le32 *)CNTRL_REG(p, ctrl));
if (blank_mode > 0)
switch (blank_mode) {
case FB_BLANK_VSYNC_SUSPEND:
@@ -952,7 +952,8 @@ static int control_var_to_par(struct fb_var_screeninfo *var,
* Convert hardware data in par to an fb_var_screeninfo
*/
-static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeninfo *var)
+static inline void control_par_to_var(struct fb_par_control *par,
+ struct fb_var_screeninfo *var)
{
struct control_regints *rv;
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/6] video: fbdev: controlfb: remove obsolete module support
[not found] ` <CGME20200116140915eucas1p1d3696cbe492d55a4e4946c7e2d13f9d2@eucas1p1.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
CONFIG_FB_CONTROL is bool, hence the Apple "control" frame buffer
driver cannot be built as a module.
Replace module_init() by device_initcall().
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/controlfb.c | 25 +------------------------
1 file changed, 1 insertion(+), 24 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index d7e53520a24c..bd0f61d8bdb5 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -31,7 +31,6 @@
* more details.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
@@ -173,28 +172,6 @@ static const struct fb_ops controlfb_ops = {
/******************** The functions for controlfb_ops ********************/
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
- struct device_node *dp;
- int ret = -ENXIO;
-
- dp = of_find_node_by_name(NULL, "control");
- if (dp && !control_of_init(dp))
- ret = 0;
- of_node_put(dp);
-
- return ret;
-}
-
-void cleanup_module(void)
-{
- control_cleanup();
-}
-#endif
-
/*
* Checks a var structure
*/
@@ -587,7 +564,7 @@ static int __init control_init(void)
return ret;
}
-module_init(control_init);
+device_initcall(control_init);
/* Work out which banks of VRAM we have installed. */
/* danj: I guess the card just ignores writes to nonexistant VRAM... */
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/6] video: fbdev: controlfb: add COMPILE_TEST support
[not found] ` <CGME20200116140915eucas1p28dfeecf8a58cecb00262fe86fd19c4f5@eucas1p2.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
2020-01-17 19:31 ` Sam Ravnborg
0 siblings, 1 reply; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Add COMPILE_TEST support to controlfb driver for better compile
testing coverage.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/Kconfig | 2 +-
drivers/video/fbdev/controlfb.c | 21 +++++++++++++++++++--
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index aa9541bf964b..91c872457863 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -472,7 +472,7 @@ config FB_OF
config FB_CONTROL
bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC && PPC32
+ depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index bd0f61d8bdb5..87cd817ad4c6 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -47,12 +47,25 @@
#include <linux/nvram.h>
#include <linux/adb.h>
#include <linux/cuda.h>
+#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#include <asm/btext.h>
+#endif
#include "macmodes.h"
#include "controlfb.h"
+#ifndef CONFIG_PPC_PMAC
+#undef in_8
+#undef out_8
+#undef in_le32
+#undef out_le32
+#define in_8(addr) 0
+#define out_8(addr, val)
+#define in_le32(addr) 0
+#define out_le32(addr, val)
+#endif
+
struct fb_par_control {
int vmode, cmode;
int xres, yres;
@@ -278,7 +291,9 @@ static int controlfb_mmap(struct fb_info *info,
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
} else {
/* framebuffer */
+#ifdef CONFIG_PPC_PMAC
vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
+#endif
}
return vm_iomap_memory(vma, start, len);
@@ -582,13 +597,14 @@ static void __init find_vram_size(struct fb_info_control *p)
out_8(&p->frame_buffer[0x600000], 0xb3);
out_8(&p->frame_buffer[0x600001], 0x71);
+#ifdef CONFIG_PPC_PMAC
asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0x600000])
: "memory" );
mb();
asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0x600000])
: "memory" );
mb();
-
+#endif
bank2 = (in_8(&p->frame_buffer[0x600000]) == 0xb3)
&& (in_8(&p->frame_buffer[0x600001]) == 0x71);
@@ -601,13 +617,14 @@ static void __init find_vram_size(struct fb_info_control *p)
out_8(&p->frame_buffer[0], 0x5a);
out_8(&p->frame_buffer[1], 0xc7);
+#ifdef CONFIG_PPC_PMAC
asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0])
: "memory" );
mb();
asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0])
: "memory" );
mb();
-
+#endif
bank1 = (in_8(&p->frame_buffer[0]) == 0x5a)
&& (in_8(&p->frame_buffer[1]) == 0xc7);
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/6] video: fbdev: controlfb: remove function prototypes part #1
[not found] ` <CGME20200116140916eucas1p1a6aff99bd371c4e23b1cc287bc3c42a8@eucas1p1.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Reorder code a bit and then remove no longer needed function
prototypes.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/controlfb.c | 41 +++++++++++----------------------
1 file changed, 13 insertions(+), 28 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 87cd817ad4c6..32ee6e4b5db4 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -129,20 +129,6 @@ struct fb_info_control {
#define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r))
-/******************** Prototypes for exported functions ********************/
-/*
- * struct fb_ops
- */
-static int controlfb_pan_display(struct fb_var_screeninfo *var,
- struct fb_info *info);
-static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info);
-static int controlfb_blank(int blank_mode, struct fb_info *info);
-static int controlfb_mmap(struct fb_info *info,
- struct vm_area_struct *vma);
-static int controlfb_set_par (struct fb_info *info);
-static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
-
/******************** Prototypes for internal functions **********************/
static void set_control_clock(unsigned char *params);
@@ -169,20 +155,6 @@ static int default_vmode __initdata = VMODE_NVRAM;
static int default_cmode __initdata = CMODE_NVRAM;
-static const struct fb_ops controlfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = controlfb_check_var,
- .fb_set_par = controlfb_set_par,
- .fb_setcolreg = controlfb_setcolreg,
- .fb_pan_display = controlfb_pan_display,
- .fb_blank = controlfb_blank,
- .fb_mmap = controlfb_mmap,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-
/******************** The functions for controlfb_ops ********************/
/*
@@ -1014,6 +986,19 @@ static inline void control_par_to_var(struct fb_par_control *par,
var->pixclock >>= par->regvals.clock_params[2];
}
+static const struct fb_ops controlfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = controlfb_check_var,
+ .fb_set_par = controlfb_set_par,
+ .fb_setcolreg = controlfb_setcolreg,
+ .fb_pan_display = controlfb_pan_display,
+ .fb_blank = controlfb_blank,
+ .fb_mmap = controlfb_mmap,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
/*
* Set misc info vars for this driver
*/
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 5/6] video: fbdev: controlfb: remove function prototypes part #2
[not found] ` <CGME20200116140916eucas1p112ff962e85e6feb4dbc2ff65443ef1ce@eucas1p1.samsung.com>
@ 2020-01-16 14:08 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:08 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Reorder code a bit and then remove no longer needed function
prototypes.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/controlfb.c | 410 +++++++++++++++-----------------
1 file changed, 198 insertions(+), 212 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 32ee6e4b5db4..4012ecf72d47 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -131,20 +131,12 @@ struct fb_info_control {
/******************** Prototypes for internal functions **********************/
-static void set_control_clock(unsigned char *params);
-static int init_control(struct fb_info_control *p);
static void control_set_hardware(struct fb_info_control *p,
struct fb_par_control *par);
-static int control_of_init(struct device_node *dp);
-static void find_vram_size(struct fb_info_control *p);
-static int read_control_sense(struct fb_info_control *p);
-static int calc_clock_params(unsigned long clk, unsigned char *param);
static int control_var_to_par(struct fb_var_screeninfo *var,
struct fb_par_control *par, const struct fb_info *fb_info);
static inline void control_par_to_var(struct fb_par_control *par,
struct fb_var_screeninfo *var);
-static void control_init_info(struct fb_info *info, struct fb_info_control *p);
-static void control_cleanup(void);
/************************** Internal variables *******************************/
@@ -360,77 +352,6 @@ static void set_control_clock(unsigned char *params)
#endif
}
-
-/*
- * finish off the driver initialization and register
- */
-static int __init init_control(struct fb_info_control *p)
-{
- int full, sense, vmode, cmode, vyres;
- struct fb_var_screeninfo var;
- int rc;
-
- printk(KERN_INFO "controlfb: ");
-
- full = p->total_vram == 0x400000;
-
- /* Try to pick a video mode out of NVRAM if we have one. */
- cmode = default_cmode;
- if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM)
- cmode = nvram_read_byte(NV_CMODE);
- if (cmode < CMODE_8 || cmode > CMODE_32)
- cmode = CMODE_8;
-
- vmode = default_vmode;
- if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM)
- vmode = nvram_read_byte(NV_VMODE);
- if (vmode < 1 || vmode > VMODE_MAX ||
- control_mac_modes[vmode - 1].m[full] < cmode) {
- sense = read_control_sense(p);
- printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
- vmode = mac_map_monitor_sense(sense);
- if (control_mac_modes[vmode - 1].m[full] < 0)
- vmode = VMODE_640_480_60;
- cmode = min(cmode, control_mac_modes[vmode - 1].m[full]);
- }
-
- /* Initialize info structure */
- control_init_info(&p->info, p);
-
- /* Setup default var */
- if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
- /* This shouldn't happen! */
- printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
-try_again:
- vmode = VMODE_640_480_60;
- cmode = CMODE_8;
- if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
- printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
- return -ENXIO;
- }
- printk(KERN_INFO "controlfb: ");
- }
- printk("using video mode %d and color mode %d.\n", vmode, cmode);
-
- vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode);
- if (vyres > var.yres)
- var.yres_virtual = vyres;
-
- /* Apply default var */
- var.activate = FB_ACTIVATE_NOW;
- rc = fb_set_var(&p->info, &var);
- if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
- goto try_again;
-
- /* Register with fbdev layer */
- if (register_framebuffer(&p->info) < 0)
- return -ENXIO;
-
- fb_info(&p->info, "control display adapter\n");
-
- return 0;
-}
-
#define RADACAL_WRITE(a,d) \
out_8(&p->cmap_regs->addr, (a)); \
out_8(&p->cmap_regs->dat, (d))
@@ -492,67 +413,6 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
#endif /* CONFIG_BOOTX_TEXT */
}
-
-/*
- * Parse user specified options (`video=controlfb:')
- */
-static void __init control_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return;
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!strncmp(this_opt, "vmode:", 6)) {
- int vmode = simple_strtoul(this_opt+6, NULL, 0);
- if (vmode > 0 && vmode <= VMODE_MAX &&
- control_mac_modes[vmode - 1].m[1] >= 0)
- default_vmode = vmode;
- } else if (!strncmp(this_opt, "cmode:", 6)) {
- int depth = simple_strtoul(this_opt+6, NULL, 0);
- switch (depth) {
- case CMODE_8:
- case CMODE_16:
- case CMODE_32:
- default_cmode = depth;
- break;
- case 8:
- default_cmode = CMODE_8;
- break;
- case 15:
- case 16:
- default_cmode = CMODE_16;
- break;
- case 24:
- case 32:
- default_cmode = CMODE_32;
- break;
- }
- }
- }
-}
-
-static int __init control_init(void)
-{
- struct device_node *dp;
- char *option = NULL;
- int ret = -ENXIO;
-
- if (fb_get_options("controlfb", &option))
- return -ENODEV;
- control_setup(option);
-
- dp = of_find_node_by_name(NULL, "control");
- if (dp && !control_of_init(dp))
- ret = 0;
- of_node_put(dp);
-
- return ret;
-}
-
-device_initcall(control_init);
-
/* Work out which banks of VRAM we have installed. */
/* danj: I guess the card just ignores writes to nonexistant VRAM... */
@@ -629,78 +489,6 @@ static void __init find_vram_size(struct fb_info_control *p)
(bank1 + bank2) << 1, bank1 << 1, bank2 << 1);
}
-
-/*
- * find "control" and initialize
- */
-static int __init control_of_init(struct device_node *dp)
-{
- struct fb_info_control *p;
- struct resource fb_res, reg_res;
-
- if (control_fb) {
- printk(KERN_ERR "controlfb: only one control is supported\n");
- return -ENXIO;
- }
-
- if (of_pci_address_to_resource(dp, 2, &fb_res) ||
- of_pci_address_to_resource(dp, 1, ®_res)) {
- printk(KERN_ERR "can't get 2 addresses for control\n");
- return -ENXIO;
- }
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
- control_fb = p; /* save it for cleanups */
-
- /* Map in frame buffer and registers */
- p->fb_orig_base = fb_res.start;
- p->fb_orig_size = resource_size(&fb_res);
- /* use the big-endian aperture (??) */
- p->frame_buffer_phys = fb_res.start + 0x800000;
- p->control_regs_phys = reg_res.start;
- p->control_regs_size = resource_size(®_res);
-
- if (!p->fb_orig_base ||
- !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
- p->fb_orig_base = 0;
- goto error_out;
- }
- /* map at most 8MB for the frame buffer */
- p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000);
-
- if (!p->control_regs_phys ||
- !request_mem_region(p->control_regs_phys, p->control_regs_size,
- "controlfb regs")) {
- p->control_regs_phys = 0;
- goto error_out;
- }
- p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size);
-
- p->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */
- if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) {
- p->cmap_regs_phys = 0;
- goto error_out;
- }
- p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000);
-
- if (!p->cmap_regs || !p->control_regs || !p->frame_buffer)
- goto error_out;
-
- find_vram_size(p);
- if (!p->total_vram)
- goto error_out;
-
- if (init_control(p) < 0)
- goto error_out;
-
- return 0;
-
-error_out:
- control_cleanup();
- return -ENXIO;
-}
-
/*
* Get the monitor sense value.
* Note that this can be called before calibrate_delay,
@@ -1025,6 +813,115 @@ static void __init control_init_info(struct fb_info *info, struct fb_info_contro
info->fix.accel = FB_ACCEL_NONE;
}
+/*
+ * Parse user specified options (`video=controlfb:')
+ */
+static void __init control_setup(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "vmode:", 6)) {
+ int vmode = simple_strtoul(this_opt+6, NULL, 0);
+ if (vmode > 0 && vmode <= VMODE_MAX &&
+ control_mac_modes[vmode - 1].m[1] >= 0)
+ default_vmode = vmode;
+ } else if (!strncmp(this_opt, "cmode:", 6)) {
+ int depth = simple_strtoul(this_opt+6, NULL, 0);
+ switch (depth) {
+ case CMODE_8:
+ case CMODE_16:
+ case CMODE_32:
+ default_cmode = depth;
+ break;
+ case 8:
+ default_cmode = CMODE_8;
+ break;
+ case 15:
+ case 16:
+ default_cmode = CMODE_16;
+ break;
+ case 24:
+ case 32:
+ default_cmode = CMODE_32;
+ break;
+ }
+ }
+ }
+}
+
+/*
+ * finish off the driver initialization and register
+ */
+static int __init init_control(struct fb_info_control *p)
+{
+ int full, sense, vmode, cmode, vyres;
+ struct fb_var_screeninfo var;
+ int rc;
+
+ printk(KERN_INFO "controlfb: ");
+
+ full = p->total_vram == 0x400000;
+
+ /* Try to pick a video mode out of NVRAM if we have one. */
+ cmode = default_cmode;
+ if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM)
+ cmode = nvram_read_byte(NV_CMODE);
+ if (cmode < CMODE_8 || cmode > CMODE_32)
+ cmode = CMODE_8;
+
+ vmode = default_vmode;
+ if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM)
+ vmode = nvram_read_byte(NV_VMODE);
+ if (vmode < 1 || vmode > VMODE_MAX ||
+ control_mac_modes[vmode - 1].m[full] < cmode) {
+ sense = read_control_sense(p);
+ printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
+ vmode = mac_map_monitor_sense(sense);
+ if (control_mac_modes[vmode - 1].m[full] < 0)
+ vmode = VMODE_640_480_60;
+ cmode = min(cmode, control_mac_modes[vmode - 1].m[full]);
+ }
+
+ /* Initialize info structure */
+ control_init_info(&p->info, p);
+
+ /* Setup default var */
+ if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
+ /* This shouldn't happen! */
+ printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
+try_again:
+ vmode = VMODE_640_480_60;
+ cmode = CMODE_8;
+ if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
+ printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
+ return -ENXIO;
+ }
+ printk(KERN_INFO "controlfb: ");
+ }
+ printk("using video mode %d and color mode %d.\n", vmode, cmode);
+
+ vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode);
+ if (vyres > var.yres)
+ var.yres_virtual = vyres;
+
+ /* Apply default var */
+ var.activate = FB_ACTIVATE_NOW;
+ rc = fb_set_var(&p->info, &var);
+ if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
+ goto try_again;
+
+ /* Register with fbdev layer */
+ if (register_framebuffer(&p->info) < 0)
+ return -ENXIO;
+
+ fb_info(&p->info, "control display adapter\n");
+
+ return 0;
+}
static void control_cleanup(void)
{
@@ -1051,4 +948,93 @@ static void control_cleanup(void)
kfree(p);
}
+/*
+ * find "control" and initialize
+ */
+static int __init control_of_init(struct device_node *dp)
+{
+ struct fb_info_control *p;
+ struct resource fb_res, reg_res;
+
+ if (control_fb) {
+ printk(KERN_ERR "controlfb: only one control is supported\n");
+ return -ENXIO;
+ }
+
+ if (of_pci_address_to_resource(dp, 2, &fb_res) ||
+ of_pci_address_to_resource(dp, 1, ®_res)) {
+ printk(KERN_ERR "can't get 2 addresses for control\n");
+ return -ENXIO;
+ }
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+ control_fb = p; /* save it for cleanups */
+
+ /* Map in frame buffer and registers */
+ p->fb_orig_base = fb_res.start;
+ p->fb_orig_size = resource_size(&fb_res);
+ /* use the big-endian aperture (??) */
+ p->frame_buffer_phys = fb_res.start + 0x800000;
+ p->control_regs_phys = reg_res.start;
+ p->control_regs_size = resource_size(®_res);
+
+ if (!p->fb_orig_base ||
+ !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
+ p->fb_orig_base = 0;
+ goto error_out;
+ }
+ /* map at most 8MB for the frame buffer */
+ p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000);
+
+ if (!p->control_regs_phys ||
+ !request_mem_region(p->control_regs_phys, p->control_regs_size,
+ "controlfb regs")) {
+ p->control_regs_phys = 0;
+ goto error_out;
+ }
+ p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size);
+
+ p->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */
+ if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) {
+ p->cmap_regs_phys = 0;
+ goto error_out;
+ }
+ p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000);
+
+ if (!p->cmap_regs || !p->control_regs || !p->frame_buffer)
+ goto error_out;
+
+ find_vram_size(p);
+ if (!p->total_vram)
+ goto error_out;
+
+ if (init_control(p) < 0)
+ goto error_out;
+
+ return 0;
+
+error_out:
+ control_cleanup();
+ return -ENXIO;
+}
+
+static int __init control_init(void)
+{
+ struct device_node *dp;
+ char *option = NULL;
+ int ret = -ENXIO;
+ if (fb_get_options("controlfb", &option))
+ return -ENODEV;
+ control_setup(option);
+
+ dp = of_find_node_by_name(NULL, "control");
+ if (dp && !control_of_init(dp))
+ ret = 0;
+ of_node_put(dp);
+
+ return ret;
+}
+
+device_initcall(control_init);
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 6/6] video: fbdev: controlfb: remove function prototypes part #3
[not found] ` <CGME20200116140916eucas1p2bd3480995a55fdc646481a8fa5a5aff3@eucas1p2.samsung.com>
@ 2020-01-16 14:09 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 10+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-01-16 14:09 UTC (permalink / raw)
To: linux-fbdev, dri-devel, linux-kernel; +Cc: Andrzej Hajda, b.zolnierkie
Reorder code a bit and then remove no longer needed function
prototypes.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/video/fbdev/controlfb.c | 306 +++++++++++++++-----------------
1 file changed, 147 insertions(+), 159 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 4012ecf72d47..e71192ee5650 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -129,16 +129,6 @@ struct fb_info_control {
#define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r))
-/******************** Prototypes for internal functions **********************/
-
-static void control_set_hardware(struct fb_info_control *p,
- struct fb_par_control *par);
-static int control_var_to_par(struct fb_var_screeninfo *var,
- struct fb_par_control *par, const struct fb_info *fb_info);
-static inline void control_par_to_var(struct fb_par_control *par,
- struct fb_var_screeninfo *var);
-
-
/************************** Internal variables *******************************/
static struct fb_info_control *control_fb;
@@ -147,155 +137,6 @@ static int default_vmode __initdata = VMODE_NVRAM;
static int default_cmode __initdata = CMODE_NVRAM;
-/******************** The functions for controlfb_ops ********************/
-
-/*
- * Checks a var structure
- */
-static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
-{
- struct fb_par_control par;
- int err;
-
- err = control_var_to_par(var, &par, info);
- if (err)
- return err;
- control_par_to_var(&par, var);
-
- return 0;
-}
-
-/*
- * Applies current var to display
- */
-static int controlfb_set_par (struct fb_info *info)
-{
- struct fb_info_control *p =
- container_of(info, struct fb_info_control, info);
- struct fb_par_control par;
- int err;
-
- if((err = control_var_to_par(&info->var, &par, info))) {
- printk (KERN_ERR "controlfb_set_par: error calling"
- " control_var_to_par: %d.\n", err);
- return err;
- }
-
- control_set_hardware(p, &par);
-
- info->fix.visual = (p->par.cmode == CMODE_8) ?
- FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
- info->fix.line_length = p->par.pitch;
- info->fix.xpanstep = 32 >> p->par.cmode;
- info->fix.ypanstep = 1;
-
- return 0;
-}
-
-/*
- * Set screen start address according to var offset values
- */
-static inline void set_screen_start(int xoffset, int yoffset,
- struct fb_info_control *p)
-{
- struct fb_par_control *par = &p->par;
-
- par->xoffset = xoffset;
- par->yoffset = yoffset;
- out_le32(CNTRL_REG(p,start_addr),
- par->yoffset * par->pitch + (par->xoffset << par->cmode));
-}
-
-
-static int controlfb_pan_display(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- unsigned int xoffset, hstep;
- struct fb_info_control *p =
- container_of(info, struct fb_info_control, info);
- struct fb_par_control *par = &p->par;
-
- /*
- * make sure start addr will be 32-byte aligned
- */
- hstep = 0x1f >> par->cmode;
- xoffset = (var->xoffset + hstep) & ~hstep;
-
- if (xoffset+par->xres > par->vxres ||
- var->yoffset+par->yres > par->vyres)
- return -EINVAL;
-
- set_screen_start(xoffset, var->yoffset, p);
-
- return 0;
-}
-
-
-/*
- * Private mmap since we want to have a different caching on the framebuffer
- * for controlfb.
- * Note there's no locking in here; it's done in fb_mmap() in fbmem.c.
- */
-static int controlfb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- unsigned long mmio_pgoff;
- unsigned long start;
- u32 len;
-
- start = info->fix.smem_start;
- len = info->fix.smem_len;
- mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
- if (vma->vm_pgoff >= mmio_pgoff) {
- if (info->var.accel_flags)
- return -EINVAL;
- vma->vm_pgoff -= mmio_pgoff;
- start = info->fix.mmio_start;
- len = info->fix.mmio_len;
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- } else {
- /* framebuffer */
-#ifdef CONFIG_PPC_PMAC
- vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
-#endif
- }
-
- return vm_iomap_memory(vma, start, len);
-}
-
-static int controlfb_blank(int blank_mode, struct fb_info *info)
-{
- struct fb_info_control *p =
- container_of(info, struct fb_info_control, info);
- unsigned ctrl;
-
- ctrl = le32_to_cpup((const __force __le32 *)CNTRL_REG(p, ctrl));
- if (blank_mode > 0)
- switch (blank_mode) {
- case FB_BLANK_VSYNC_SUSPEND:
- ctrl &= ~3;
- break;
- case FB_BLANK_HSYNC_SUSPEND:
- ctrl &= ~0x30;
- break;
- case FB_BLANK_POWERDOWN:
- ctrl &= ~0x33;
- /* fall through */
- case FB_BLANK_NORMAL:
- ctrl |= 0x400;
- break;
- default:
- break;
- }
- else {
- ctrl &= ~0x400;
- ctrl |= 0x33;
- }
- out_le32(CNTRL_REG(p,ctrl), ctrl);
-
- return 0;
-}
-
static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
@@ -352,6 +193,20 @@ static void set_control_clock(unsigned char *params)
#endif
}
+/*
+ * Set screen start address according to var offset values
+ */
+static inline void set_screen_start(int xoffset, int yoffset,
+ struct fb_info_control *p)
+{
+ struct fb_par_control *par = &p->par;
+
+ par->xoffset = xoffset;
+ par->yoffset = yoffset;
+ out_le32(CNTRL_REG(p,start_addr),
+ par->yoffset * par->pitch + (par->xoffset << par->cmode));
+}
+
#define RADACAL_WRITE(a,d) \
out_8(&p->cmap_regs->addr, (a)); \
out_8(&p->cmap_regs->dat, (d))
@@ -774,6 +629,139 @@ static inline void control_par_to_var(struct fb_par_control *par,
var->pixclock >>= par->regvals.clock_params[2];
}
+/******************** The functions for controlfb_ops ********************/
+
+/*
+ * Checks a var structure
+ */
+static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct fb_par_control par;
+ int err;
+
+ err = control_var_to_par(var, &par, info);
+ if (err)
+ return err;
+ control_par_to_var(&par, var);
+
+ return 0;
+}
+
+/*
+ * Applies current var to display
+ */
+static int controlfb_set_par (struct fb_info *info)
+{
+ struct fb_info_control *p =
+ container_of(info, struct fb_info_control, info);
+ struct fb_par_control par;
+ int err;
+
+ if((err = control_var_to_par(&info->var, &par, info))) {
+ printk (KERN_ERR "controlfb_set_par: error calling"
+ " control_var_to_par: %d.\n", err);
+ return err;
+ }
+
+ control_set_hardware(p, &par);
+
+ info->fix.visual = (p->par.cmode == CMODE_8) ?
+ FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
+ info->fix.line_length = p->par.pitch;
+ info->fix.xpanstep = 32 >> p->par.cmode;
+ info->fix.ypanstep = 1;
+
+ return 0;
+}
+
+static int controlfb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ unsigned int xoffset, hstep;
+ struct fb_info_control *p =
+ container_of(info, struct fb_info_control, info);
+ struct fb_par_control *par = &p->par;
+
+ /*
+ * make sure start addr will be 32-byte aligned
+ */
+ hstep = 0x1f >> par->cmode;
+ xoffset = (var->xoffset + hstep) & ~hstep;
+
+ if (xoffset+par->xres > par->vxres ||
+ var->yoffset+par->yres > par->vyres)
+ return -EINVAL;
+
+ set_screen_start(xoffset, var->yoffset, p);
+
+ return 0;
+}
+
+static int controlfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct fb_info_control *p =
+ container_of(info, struct fb_info_control, info);
+ unsigned ctrl;
+
+ ctrl = le32_to_cpup((const __force __le32 *)CNTRL_REG(p, ctrl));
+ if (blank_mode > 0)
+ switch (blank_mode) {
+ case FB_BLANK_VSYNC_SUSPEND:
+ ctrl &= ~3;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ ctrl &= ~0x30;
+ break;
+ case FB_BLANK_POWERDOWN:
+ ctrl &= ~0x33;
+ /* fall through */
+ case FB_BLANK_NORMAL:
+ ctrl |= 0x400;
+ break;
+ default:
+ break;
+ }
+ else {
+ ctrl &= ~0x400;
+ ctrl |= 0x33;
+ }
+ out_le32(CNTRL_REG(p,ctrl), ctrl);
+
+ return 0;
+}
+
+/*
+ * Private mmap since we want to have a different caching on the framebuffer
+ * for controlfb.
+ * Note there's no locking in here; it's done in fb_mmap() in fbmem.c.
+ */
+static int controlfb_mmap(struct fb_info *info,
+ struct vm_area_struct *vma)
+{
+ unsigned long mmio_pgoff;
+ unsigned long start;
+ u32 len;
+
+ start = info->fix.smem_start;
+ len = info->fix.smem_len;
+ mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
+ if (vma->vm_pgoff >= mmio_pgoff) {
+ if (info->var.accel_flags)
+ return -EINVAL;
+ vma->vm_pgoff -= mmio_pgoff;
+ start = info->fix.mmio_start;
+ len = info->fix.mmio_len;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ } else {
+ /* framebuffer */
+#ifdef CONFIG_PPC_PMAC
+ vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
+#endif
+ }
+
+ return vm_iomap_memory(vma, start, len);
+}
+
static const struct fb_ops controlfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = controlfb_check_var,
--
2.24.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/6] video: fbdev: controlfb: fix sparse warning about using incorrect type
2020-01-16 14:08 ` [PATCH 1/6] video: fbdev: controlfb: fix sparse warning about using incorrect type Bartlomiej Zolnierkiewicz
@ 2020-01-17 19:13 ` Sam Ravnborg
0 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-01-17 19:13 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: linux-fbdev, dri-devel, linux-kernel
Hi Bartlomiej
On Thu, Jan 16, 2020 at 03:08:55PM +0100, Bartlomiej Zolnierkiewicz wrote:
> Force le32_to_cpup() argument to be of proper type (const __le32 *).
>
> Also add missing inline keyword to control_par_to_var() definition
> (to match function prototype).
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> drivers/video/fbdev/controlfb.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
> index 38b61cdb5ca4..d7e53520a24c 100644
> --- a/drivers/video/fbdev/controlfb.c
> +++ b/drivers/video/fbdev/controlfb.c
> @@ -313,7 +313,7 @@ static int controlfb_blank(int blank_mode, struct fb_info *info)
> container_of(info, struct fb_info_control, info);
> unsigned ctrl;
>
> - ctrl = le32_to_cpup(CNTRL_REG(p,ctrl));
> + ctrl = le32_to_cpup((const __force __le32 *)CNTRL_REG(p, ctrl));
Only judging from the other code in the same driver,
I think a better fix would be to use:
ctrl = in_le32(CNTRL_REG(p,ctrl));
?
Sam
> if (blank_mode > 0)
> switch (blank_mode) {
> case FB_BLANK_VSYNC_SUSPEND:
> @@ -952,7 +952,8 @@ static int control_var_to_par(struct fb_var_screeninfo *var,
> * Convert hardware data in par to an fb_var_screeninfo
> */
>
> -static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeninfo *var)
> +static inline void control_par_to_var(struct fb_par_control *par,
> + struct fb_var_screeninfo *var)
> {
> struct control_regints *rv;
>
> --
> 2.24.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 3/6] video: fbdev: controlfb: add COMPILE_TEST support
2020-01-16 14:08 ` [PATCH 3/6] video: fbdev: controlfb: add COMPILE_TEST support Bartlomiej Zolnierkiewicz
@ 2020-01-17 19:31 ` Sam Ravnborg
0 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-01-17 19:31 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: linux-fbdev, dri-devel, linux-kernel
Hi Bartlomiej
On Thu, Jan 16, 2020 at 03:08:57PM +0100, Bartlomiej Zolnierkiewicz wrote:
> Add COMPILE_TEST support to controlfb driver for better compile
> testing coverage.
This is not a nice patch to add COMPILE_TEST support :-(
But I see why you do it.
I already spent too much time being side-tracked by this, but here are
some comments to consider.
With the comments considered:
Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> drivers/video/fbdev/Kconfig | 2 +-
> drivers/video/fbdev/controlfb.c | 21 +++++++++++++++++++--
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> index aa9541bf964b..91c872457863 100644
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -472,7 +472,7 @@ config FB_OF
>
> config FB_CONTROL
> bool "Apple \"control\" display support"
> - depends on (FB = y) && PPC_PMAC && PPC32
> + depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST)
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
> index bd0f61d8bdb5..87cd817ad4c6 100644
> --- a/drivers/video/fbdev/controlfb.c
> +++ b/drivers/video/fbdev/controlfb.c
> @@ -47,12 +47,25 @@
> #include <linux/nvram.h>
> #include <linux/adb.h>
> #include <linux/cuda.h>
> +#ifdef CONFIG_PPC_PMAC
> #include <asm/prom.h>
> #include <asm/btext.h>
> +#endif
>
> #include "macmodes.h"
> #include "controlfb.h"
>
> +#ifndef CONFIG_PPC_PMAC
> +#undef in_8
> +#undef out_8
> +#undef in_le32
> +#undef out_le32
> +#define in_8(addr) 0
> +#define out_8(addr, val)
> +#define in_le32(addr) 0
> +#define out_le32(addr, val)
> +#endif
> +
> struct fb_par_control {
> int vmode, cmode;
> int xres, yres;
> @@ -278,7 +291,9 @@ static int controlfb_mmap(struct fb_info *info,
> vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> } else {
> /* framebuffer */
> +#ifdef CONFIG_PPC_PMAC
> vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
> +#endif
Add:
#define pgprot_cached_wthru(x) 0
in the CONFIG_PPC_PMAC block?
> }
>
> return vm_iomap_memory(vma, start, len);
> @@ -582,13 +597,14 @@ static void __init find_vram_size(struct fb_info_control *p)
>
> out_8(&p->frame_buffer[0x600000], 0xb3);
> out_8(&p->frame_buffer[0x600001], 0x71);
> +#ifdef CONFIG_PPC_PMAC
> asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0x600000])
> : "memory" );
> mb();
> asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0x600000])
> : "memory" );
> mb();
> -
> +#endif
The inline asm block could be written as:
static void invalid_vram_cache(void * addr)
{
eieio();
dcbf(addr);
mb;
eieio();
dcbi(addr);
mb();
}
And then this inline function could be in the CONFIG_PPC_PMAC block -
and a dummy in the else part.
The function name is just my best guess what the assembler does.
> bank2 = (in_8(&p->frame_buffer[0x600000]) == 0xb3)
> && (in_8(&p->frame_buffer[0x600001]) == 0x71);
>
> @@ -601,13 +617,14 @@ static void __init find_vram_size(struct fb_info_control *p)
>
> out_8(&p->frame_buffer[0], 0x5a);
> out_8(&p->frame_buffer[1], 0xc7);
> +#ifdef CONFIG_PPC_PMAC
> asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0])
> : "memory" );
> mb();
> asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0])
> : "memory" );
> mb();
> -
> +#endif
Same here.
> bank1 = (in_8(&p->frame_buffer[0]) == 0x5a)
> && (in_8(&p->frame_buffer[1]) == 0xc7);
>
> --
> 2.24.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/6] video: fbdev: controlfb: small cleanup
2020-01-16 14:08 ` [PATCH 0/6] video: fbdev: controlfb: small cleanup Bartlomiej Zolnierkiewicz
` (5 preceding siblings ...)
[not found] ` <CGME20200116140916eucas1p2bd3480995a55fdc646481a8fa5a5aff3@eucas1p2.samsung.com>
@ 2020-01-17 19:32 ` Sam Ravnborg
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-01-17 19:32 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: linux-fbdev, dri-devel, linux-kernel
Hi Bartlomiej
On Thu, Jan 16, 2020 at 03:08:54PM +0100, Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> Small cleanup for controlfb driver:
>
> - fix sparse warnings
> - remove not working module support
> - add COMPILE_TEST support
> - remove redundant function prototypes
Nice cleanup - with a few comments.
The last three patches are the good ones.
With my comments considered - and then up to you if you cahnge anything
- then all patches are:
Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (6):
> video: fbdev: controlfb: fix sparse warning about using incorrect type
> video: fbdev: controlfb: remove obsolete module support
> video: fbdev: controlfb: add COMPILE_TEST support
> video: fbdev: controlfb: remove function prototypes part #1
> video: fbdev: controlfb: remove function prototypes part #2
> video: fbdev: controlfb: remove function prototypes part #3
>
> drivers/video/fbdev/Kconfig | 2 +-
> drivers/video/fbdev/controlfb.c | 810 +++++++++++++++-----------------
> 2 files changed, 383 insertions(+), 429 deletions(-)
>
> --
> 2.24.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-01-17 19:32 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200116140914eucas1p1a62794ad40589e818614176ea8e817ff@eucas1p1.samsung.com>
2020-01-16 14:08 ` [PATCH 0/6] video: fbdev: controlfb: small cleanup Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200116140915eucas1p2d6a2c654a66a78b6c3c1fc710f8a65b8@eucas1p2.samsung.com>
2020-01-16 14:08 ` [PATCH 1/6] video: fbdev: controlfb: fix sparse warning about using incorrect type Bartlomiej Zolnierkiewicz
2020-01-17 19:13 ` Sam Ravnborg
[not found] ` <CGME20200116140915eucas1p1d3696cbe492d55a4e4946c7e2d13f9d2@eucas1p1.samsung.com>
2020-01-16 14:08 ` [PATCH 2/6] video: fbdev: controlfb: remove obsolete module support Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200116140915eucas1p28dfeecf8a58cecb00262fe86fd19c4f5@eucas1p2.samsung.com>
2020-01-16 14:08 ` [PATCH 3/6] video: fbdev: controlfb: add COMPILE_TEST support Bartlomiej Zolnierkiewicz
2020-01-17 19:31 ` Sam Ravnborg
[not found] ` <CGME20200116140916eucas1p1a6aff99bd371c4e23b1cc287bc3c42a8@eucas1p1.samsung.com>
2020-01-16 14:08 ` [PATCH 4/6] video: fbdev: controlfb: remove function prototypes part #1 Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200116140916eucas1p112ff962e85e6feb4dbc2ff65443ef1ce@eucas1p1.samsung.com>
2020-01-16 14:08 ` [PATCH 5/6] video: fbdev: controlfb: remove function prototypes part #2 Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200116140916eucas1p2bd3480995a55fdc646481a8fa5a5aff3@eucas1p2.samsung.com>
2020-01-16 14:09 ` [PATCH 6/6] video: fbdev: controlfb: remove function prototypes part #3 Bartlomiej Zolnierkiewicz
2020-01-17 19:32 ` [PATCH 0/6] video: fbdev: controlfb: small cleanup Sam Ravnborg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).