From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: Clemens Ladisch <clemens@ladisch.de>,
Jean Delvare <jdelvare@suse.com>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [RFT PATCH 1/4] hwmon: (k10temp) Use bitops
Date: Thu, 16 Jan 2020 06:17:57 -0800 [thread overview]
Message-ID: <20200116141800.9828-2-linux@roeck-us.net> (raw)
In-Reply-To: <20200116141800.9828-1-linux@roeck-us.net>
Using bitops makes bit masks and shifts easier to read.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/k10temp.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 5c1dddde193c..8807d7da68db 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -5,6 +5,7 @@
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*/
+#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -31,22 +32,22 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
#endif
/* CPUID function 0x80000001, ebx */
-#define CPUID_PKGTYPE_MASK 0xf0000000
+#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
#define CPUID_PKGTYPE_F 0x00000000
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
/* DRAM controller (PCI function 2) */
#define REG_DCT0_CONFIG_HIGH 0x094
-#define DDR3_MODE 0x00000100
+#define DDR3_MODE BIT(8)
/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
-#define HTC_ENABLE 0x00000001
+#define HTC_ENABLE BIT(0)
#define REG_REPORTED_TEMPERATURE 0xa4
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
-#define NB_CAP_HTC 0x00000400
+#define NB_CAP_HTC BIT(10)
/*
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
@@ -60,6 +61,9 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
/* F17h M01h Access througn SMN */
#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800
+#define CUR_TEMP_SHIFT 21
+#define CUR_TEMP_RANGE_SEL_MASK BIT(19)
+
struct k10temp_data {
struct pci_dev *pdev;
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -129,7 +133,7 @@ static unsigned int get_raw_temp(struct k10temp_data *data)
u32 regval;
data->read_tempreg(data->pdev, ®val);
- temp = (regval >> 21) * 125;
+ temp = (regval >> CUR_TEMP_SHIFT) * 125;
if (regval & data->temp_adjust_mask)
temp -= 49000;
return temp;
@@ -312,7 +316,7 @@ static int k10temp_probe(struct pci_dev *pdev,
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
- data->temp_adjust_mask = 0x80000;
+ data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_f17;
data->show_tdie = true;
} else {
--
2.17.1
next prev parent reply other threads:[~2020-01-16 14:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 14:17 [RFT PATCH 0/4] hwmon: k10temp driver improvements Guenter Roeck
2020-01-16 14:17 ` Guenter Roeck [this message]
2020-01-16 14:17 ` [RFT PATCH 2/4] hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info Guenter Roeck
2020-01-16 14:17 ` [RFT PATCH 3/4] hwmon: (k10temp) Report temperatures per CPU die Guenter Roeck
2020-01-16 14:18 ` [RFT PATCH 4/4] hwmon: (k10temp) Show core and SoC current and voltages on Zen CPUs Guenter Roeck
2020-01-16 20:55 ` [RFT PATCH 0/4] hwmon: k10temp driver improvements Darren Salt
2020-01-16 21:11 ` Guenter Roeck
2020-01-16 22:46 ` Bernhard Gebetsberger
2020-01-16 22:52 ` Guenter Roeck
2020-01-17 0:38 ` Ken Moffat
2020-01-17 3:58 ` Guenter Roeck
2020-01-17 4:47 ` Ken Moffat
2020-01-17 14:14 ` Guenter Roeck
2020-01-17 18:58 ` Ken Moffat
2020-01-17 9:46 ` Ondrej Čerman
2020-01-17 18:46 ` Guenter Roeck
2020-01-17 22:48 ` Ondrej Čerman
2020-01-17 9:58 ` Holger Kiehl
2020-01-17 19:15 ` Sebastian Reichel
2020-01-18 8:52 ` Brad Campbell
2020-01-18 17:14 ` Guenter Roeck
2020-01-19 1:59 ` Brad Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116141800.9828-2-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=clemens@ladisch.de \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).