* [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support @ 2020-01-19 11:00 Tomer Maimon 2020-01-19 11:00 ` [PATCH v1 2/2] iio: adc: modify NPCM " Tomer Maimon 2020-01-22 16:24 ` [PATCH v1 1/2] dt-binding: iio: add NPCM ADC " Rob Herring 0 siblings, 2 replies; 5+ messages in thread From: Tomer Maimon @ 2020-01-19 11:00 UTC (permalink / raw) To: jic23, knaack.h, lars, pmeerw, robh+dt, mark.rutland, avifishman70, tali.perry1, venture, yuenn, benjaminfair, joel Cc: linux-iio, devicetree, linux-kernel, openbmc, Tomer Maimon Add NPCM ADC reset binding documentation. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt index eb939fe77836..ef8eeec1a997 100644 --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt @@ -6,6 +6,7 @@ Required properties: - compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. - reg: specifies physical base address and size of the registers. - interrupts: Contain the ADC interrupt with flags for falling edge. +- resets : phandle to the reset control for this device. Optional properties: - clocks: phandle of ADC reference clock, in case the clock is not @@ -21,4 +22,5 @@ adc: adc@f000c000 { reg = <0xf000c000 0x8>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk NPCM7XX_CLK_ADC>; + resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>; }; -- 2.22.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v1 2/2] iio: adc: modify NPCM reset support 2020-01-19 11:00 [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support Tomer Maimon @ 2020-01-19 11:00 ` Tomer Maimon 2020-01-29 20:01 ` Jonathan Cameron 2020-01-22 16:24 ` [PATCH v1 1/2] dt-binding: iio: add NPCM ADC " Rob Herring 1 sibling, 1 reply; 5+ messages in thread From: Tomer Maimon @ 2020-01-19 11:00 UTC (permalink / raw) To: jic23, knaack.h, lars, pmeerw, robh+dt, mark.rutland, avifishman70, tali.perry1, venture, yuenn, benjaminfair, joel Cc: linux-iio, devicetree, linux-kernel, openbmc, Tomer Maimon Modify NPCM ADC reset support from direct register access to reset controller support. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- drivers/iio/adc/npcm_adc.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index a6170a37ebe8..83bad2d5575d 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -14,6 +14,7 @@ #include <linux/regulator/consumer.h> #include <linux/spinlock.h> #include <linux/uaccess.h> +#include <linux/reset.h> struct npcm_adc { bool int_status; @@ -23,13 +24,9 @@ struct npcm_adc { struct clk *adc_clk; wait_queue_head_t wq; struct regulator *vref; - struct regmap *rst_regmap; + struct reset_control *reset; }; -/* NPCM7xx reset module */ -#define NPCM7XX_IPSRST1_OFFSET 0x020 -#define NPCM7XX_IPSRST1_ADC_RST BIT(27) - /* ADC registers */ #define NPCM_ADCCON 0x00 #define NPCM_ADCDATA 0x04 @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) msecs_to_jiffies(10)); if (ret == 0) { regtemp = ioread32(info->regs + NPCM_ADCCON); - if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { + if (regtemp & NPCM_ADCCON_ADC_CONV) { /* if conversion failed - reset ADC module */ - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, - NPCM7XX_IPSRST1_ADC_RST); + reset_control_assert(info->reset); msleep(100); - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, - 0x0); + reset_control_deassert(info->reset); msleep(100); /* Enable ADC and start conversion module */ @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device *pdev) struct npcm_adc *info; struct iio_dev *indio_dev; struct device *dev = &pdev->dev; - struct device_node *np = pdev->dev.of_node; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); if (!indio_dev) @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device *pdev) if (IS_ERR(info->regs)) return PTR_ERR(info->regs); + info->reset = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(info->reset)) + return PTR_ERR(info->reset); + info->adc_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(info->adc_clk)) { dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device *pdev) div = div >> NPCM_ADCCON_DIV_SHIFT; info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); - if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { - info->rst_regmap = syscon_regmap_lookup_by_compatible - ("nuvoton,npcm750-rst"); - if (IS_ERR(info->rst_regmap)) { - dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); - ret = PTR_ERR(info->rst_regmap); - goto err_disable_clk; - } - } - irq = platform_get_irq(pdev, 0); if (irq <= 0) { ret = -EINVAL; -- 2.22.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1 2/2] iio: adc: modify NPCM reset support 2020-01-19 11:00 ` [PATCH v1 2/2] iio: adc: modify NPCM " Tomer Maimon @ 2020-01-29 20:01 ` Jonathan Cameron [not found] ` <CAP6Zq1hupvQeXwynt02ePu6eL9X5oriNNwSmJEPqQWZBj770oA@mail.gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: Jonathan Cameron @ 2020-01-29 20:01 UTC (permalink / raw) To: Tomer Maimon Cc: knaack.h, lars, pmeerw, robh+dt, mark.rutland, avifishman70, tali.perry1, venture, yuenn, benjaminfair, joel, linux-iio, devicetree, linux-kernel, openbmc On Sun, 19 Jan 2020 13:00:32 +0200 Tomer Maimon <tmaimon77@gmail.com> wrote: > Modify NPCM ADC reset support from > direct register access to reset controller support. > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Hmm. This presumably breaks all old DT. If that's not a problem please say why. Jonathan > --- > drivers/iio/adc/npcm_adc.c | 30 +++++++++--------------------- > 1 file changed, 9 insertions(+), 21 deletions(-) > > diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c > index a6170a37ebe8..83bad2d5575d 100644 > --- a/drivers/iio/adc/npcm_adc.c > +++ b/drivers/iio/adc/npcm_adc.c > @@ -14,6 +14,7 @@ > #include <linux/regulator/consumer.h> > #include <linux/spinlock.h> > #include <linux/uaccess.h> > +#include <linux/reset.h> > > struct npcm_adc { > bool int_status; > @@ -23,13 +24,9 @@ struct npcm_adc { > struct clk *adc_clk; > wait_queue_head_t wq; > struct regulator *vref; > - struct regmap *rst_regmap; > + struct reset_control *reset; > }; > > -/* NPCM7xx reset module */ > -#define NPCM7XX_IPSRST1_OFFSET 0x020 > -#define NPCM7XX_IPSRST1_ADC_RST BIT(27) > - > /* ADC registers */ > #define NPCM_ADCCON 0x00 > #define NPCM_ADCDATA 0x04 > @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) > msecs_to_jiffies(10)); > if (ret == 0) { > regtemp = ioread32(info->regs + NPCM_ADCCON); > - if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { > + if (regtemp & NPCM_ADCCON_ADC_CONV) { > /* if conversion failed - reset ADC module */ > - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, > - NPCM7XX_IPSRST1_ADC_RST); > + reset_control_assert(info->reset); > msleep(100); > - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, > - 0x0); > + reset_control_deassert(info->reset); > msleep(100); > > /* Enable ADC and start conversion module */ > @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device *pdev) > struct npcm_adc *info; > struct iio_dev *indio_dev; > struct device *dev = &pdev->dev; > - struct device_node *np = pdev->dev.of_node; > > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); > if (!indio_dev) > @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device *pdev) > if (IS_ERR(info->regs)) > return PTR_ERR(info->regs); > > + info->reset = devm_reset_control_get(&pdev->dev, NULL); > + if (IS_ERR(info->reset)) > + return PTR_ERR(info->reset); > + > info->adc_clk = devm_clk_get(&pdev->dev, NULL); > if (IS_ERR(info->adc_clk)) { > dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); > @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device *pdev) > div = div >> NPCM_ADCCON_DIV_SHIFT; > info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); > > - if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { > - info->rst_regmap = syscon_regmap_lookup_by_compatible > - ("nuvoton,npcm750-rst"); > - if (IS_ERR(info->rst_regmap)) { > - dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); > - ret = PTR_ERR(info->rst_regmap); > - goto err_disable_clk; > - } > - } > - > irq = platform_get_irq(pdev, 0); > if (irq <= 0) { > ret = -EINVAL; ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <CAP6Zq1hupvQeXwynt02ePu6eL9X5oriNNwSmJEPqQWZBj770oA@mail.gmail.com>]
* Re: [PATCH v1 2/2] iio: adc: modify NPCM reset support [not found] ` <CAP6Zq1hupvQeXwynt02ePu6eL9X5oriNNwSmJEPqQWZBj770oA@mail.gmail.com> @ 2020-02-02 11:28 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2020-02-02 11:28 UTC (permalink / raw) To: Tomer Maimon Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, Mark Rutland, Avi Fishman, Tali Perry, Patrick Venture, Nancy Yuen, Benjamin Fair, Joel Stanley, open list:IIO SUBSYSTEM AND DRIVERS, devicetree, Linux Kernel Mailing List, OpenBMC Maillist On Thu, 30 Jan 2020 10:20:30 +0200 Tomer Maimon <tmaimon77@gmail.com> wrote: > Hi Jonathan, > > The patch replace reset ADC method from direct register access to using > reset driver (will applied next Linux version). > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?h=next-20200130&id=9c81b2ccf82da6e995b63e945afa882cfaa03ca9 > > > The ADC dt-binding modified as well to use the new reset method (approved > by Rob Herring) > https://www.spinics.net/lists/devicetree/msg331327.html > > Indeed the this modification require DT modification as it described in the > ADC dt-binding commit, is it an issue? Do you thnk I should describe it in > the commit? Whether it is an issue depends on nuvoton business model. Can they ensure that all places the kernel is changed will also have appropriate dt updates? If not, you need to make the code continue to function without the change (fall back to old methods). If they do have enough control to ensure it won't break any systems out in the wild, then just add a note to say that is the case to the commit message. Reasons this sort of thing is sometimes safe include: * preproduction part so no users outside of people who will expect potential breakage * dt and new kernel images only distributed in a firmware package, or where build script used to build the firmware package will ensure they match (this is a bmc chip I think, so I guess not many people build their own kernels except via scripting to package everything up as a firmware image of some type?) Thanks, Jonathan > > Thanks, > > Tomer > > > > On Wed, 29 Jan 2020 at 22:01, Jonathan Cameron <jic23@kernel.org> wrote: > > > On Sun, 19 Jan 2020 13:00:32 +0200 > > Tomer Maimon <tmaimon77@gmail.com> wrote: > > > > > Modify NPCM ADC reset support from > > > direct register access to reset controller support. > > > > > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > > > > Hmm. This presumably breaks all old DT. > > > > If that's not a problem please say why. > > > > Jonathan > > > > > --- > > > drivers/iio/adc/npcm_adc.c | 30 +++++++++--------------------- > > > 1 file changed, 9 insertions(+), 21 deletions(-) > > > > > > diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c > > > index a6170a37ebe8..83bad2d5575d 100644 > > > --- a/drivers/iio/adc/npcm_adc.c > > > +++ b/drivers/iio/adc/npcm_adc.c > > > @@ -14,6 +14,7 @@ > > > #include <linux/regulator/consumer.h> > > > #include <linux/spinlock.h> > > > #include <linux/uaccess.h> > > > +#include <linux/reset.h> > > > > > > struct npcm_adc { > > > bool int_status; > > > @@ -23,13 +24,9 @@ struct npcm_adc { > > > struct clk *adc_clk; > > > wait_queue_head_t wq; > > > struct regulator *vref; > > > - struct regmap *rst_regmap; > > > + struct reset_control *reset; > > > }; > > > > > > -/* NPCM7xx reset module */ > > > -#define NPCM7XX_IPSRST1_OFFSET 0x020 > > > -#define NPCM7XX_IPSRST1_ADC_RST BIT(27) > > > - > > > /* ADC registers */ > > > #define NPCM_ADCCON 0x00 > > > #define NPCM_ADCDATA 0x04 > > > @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, > > int *val, u8 channel) > > > msecs_to_jiffies(10)); > > > if (ret == 0) { > > > regtemp = ioread32(info->regs + NPCM_ADCCON); > > > - if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { > > > + if (regtemp & NPCM_ADCCON_ADC_CONV) { > > > /* if conversion failed - reset ADC module */ > > > - regmap_write(info->rst_regmap, > > NPCM7XX_IPSRST1_OFFSET, > > > - NPCM7XX_IPSRST1_ADC_RST); > > > + reset_control_assert(info->reset); > > > msleep(100); > > > - regmap_write(info->rst_regmap, > > NPCM7XX_IPSRST1_OFFSET, > > > - 0x0); > > > + reset_control_deassert(info->reset); > > > msleep(100); > > > > > > /* Enable ADC and start conversion module */ > > > @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device > > *pdev) > > > struct npcm_adc *info; > > > struct iio_dev *indio_dev; > > > struct device *dev = &pdev->dev; > > > - struct device_node *np = pdev->dev.of_node; > > > > > > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); > > > if (!indio_dev) > > > @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device > > *pdev) > > > if (IS_ERR(info->regs)) > > > return PTR_ERR(info->regs); > > > > > > + info->reset = devm_reset_control_get(&pdev->dev, NULL); > > > + if (IS_ERR(info->reset)) > > > + return PTR_ERR(info->reset); > > > + > > > info->adc_clk = devm_clk_get(&pdev->dev, NULL); > > > if (IS_ERR(info->adc_clk)) { > > > dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); > > > @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device > > *pdev) > > > div = div >> NPCM_ADCCON_DIV_SHIFT; > > > info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * > > 2); > > > > > > - if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { > > > - info->rst_regmap = syscon_regmap_lookup_by_compatible > > > - ("nuvoton,npcm750-rst"); > > > - if (IS_ERR(info->rst_regmap)) { > > > - dev_err(&pdev->dev, "Failed to find > > nuvoton,npcm750-rst\n"); > > > - ret = PTR_ERR(info->rst_regmap); > > > - goto err_disable_clk; > > > - } > > > - } > > > - > > > irq = platform_get_irq(pdev, 0); > > > if (irq <= 0) { > > > ret = -EINVAL; > > > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support 2020-01-19 11:00 [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support Tomer Maimon 2020-01-19 11:00 ` [PATCH v1 2/2] iio: adc: modify NPCM " Tomer Maimon @ 2020-01-22 16:24 ` Rob Herring 1 sibling, 0 replies; 5+ messages in thread From: Rob Herring @ 2020-01-22 16:24 UTC (permalink / raw) To: Tomer Maimon Cc: jic23, knaack.h, lars, pmeerw, robh+dt, mark.rutland, avifishman70, tali.perry1, venture, yuenn, benjaminfair, joel, linux-iio, devicetree, linux-kernel, openbmc, Tomer Maimon On Sun, 19 Jan 2020 13:00:31 +0200, Tomer Maimon wrote: > Add NPCM ADC reset binding documentation. > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-02-02 11:28 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-01-19 11:00 [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support Tomer Maimon 2020-01-19 11:00 ` [PATCH v1 2/2] iio: adc: modify NPCM " Tomer Maimon 2020-01-29 20:01 ` Jonathan Cameron [not found] ` <CAP6Zq1hupvQeXwynt02ePu6eL9X5oriNNwSmJEPqQWZBj770oA@mail.gmail.com> 2020-02-02 11:28 ` Jonathan Cameron 2020-01-22 16:24 ` [PATCH v1 1/2] dt-binding: iio: add NPCM ADC " Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).