[PATCH 5.5 00/56] 5.5.1-stable review

[PATCH 5.5 00/56] 5.5.1-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.5.1 release.
There are 56 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.5.1-rc1

Paul Cercueil <paul@crapouillou.net>
    power/supply: ingenic-battery: Don't change scale if there's only one

Johannes Berg <johannes.berg@intel.com>
    Revert "um: Enable CONFIG_CONSTRUCTORS"

Andrew Murray <andrew.murray@arm.com>
    KVM: arm64: Write arch.mdcr_el2 changes since last vcpu_load on VHE

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: pcrypt - Fix user-after-free on module unload

Iuliana Prodan <iuliana.prodan@nxp.com>
    crypto: caam - do not reset pointer size from MCFGR register

Daniel Axtens <dja@axtens.net>
    crypto: vmx - reject xts inputs that are too short

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: af_alg - Use bh_lock_sock in sk_destruct

Johan Hovold <johan@kernel.org>
    rsi: fix non-atomic allocation in completion handler

Johan Hovold <johan@kernel.org>
    rsi: fix memory leak on failed URB submission

Johan Hovold <johan@kernel.org>
    rsi: fix use-after-free on probe errors

Johan Hovold <johan@kernel.org>
    rsi: fix use-after-free on failed probe and unbind

David Howells <dhowells@redhat.com>
    rxrpc: Fix use-after-free in rxrpc_receive_data()

Stephen Worley <sworley@cumulusnetworks.com>
    net: include struct nhmsg size in nh nlmsg size

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'

Willem de Bruijn <willemb@google.com>
    udp: segment looped gso packets correctly

Lorenzo Bianconi <lorenzo@kernel.org>
    net: socionext: fix xdp_result initialization in netsec_process_rx

Lorenzo Bianconi <lorenzo@kernel.org>
    net: socionext: fix possible user-after-free in netsec_process_rx

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: walk through all child classes in tc_bind_tclass()

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: fix ops->bind_class() implementations

Eric Dumazet <edumazet@google.com>
    net_sched: ematch: reject invalid TCF_EM_SIMPLE

Sven Auhagen <sven.auhagen@voleatech.de>
    mvneta driver disallow XDP program on hardware buffer management

Johan Hovold <johan@kernel.org>
    zd1211rw: fix storage endpoint lookup

Johan Hovold <johan@kernel.org>
    rtl8xxxu: fix interface sanity check

Johan Hovold <johan@kernel.org>
    brcmfmac: fix interface sanity check

Johan Hovold <johan@kernel.org>
    ath9k: fix storage endpoint lookup

Paulo Alcantara (SUSE) <pc@cjr.nz>
    cifs: Fix memory allocation in __smb2_handle_cancelled_cmd()

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: set correct max-buffer-size for smb2_ioctl_init()

Vincent Whitchurch <vincent.whitchurch@axis.com>
    CIFS: Fix task struct use-after-free on reconnect

Eric Biggers <ebiggers@google.com>
    crypto: chelsio - fix writing tfm flags to wrong place

Guenter Roeck <linux@roeck-us.net>
    driver core: Fix test_async_driver_probe if NUMA is disabled

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    iio: st_gyro: Correct data for LSM9DS0 gyro

Olivier Moysan <olivier.moysan@st.com>
    iio: adc: stm32-dfsdm: fix single conversion

Tomas Winkler <tomas.winkler@intel.com>
    mei: me: add jasper point DID

Tomas Winkler <tomas.winkler@intel.com>
    mei: me: add comet point (lake) H device ids

Tomas Winkler <tomas.winkler@intel.com>
    mei: hdcp: bind only with i915 on the same PCH

Martin Fuzzey <martin.fuzzey@flowbird.group>
    binder: fix log spam for existing debugfs file creation.

Lubomir Rintel <lkundrak@v3.sk>
    component: do not dereference opaque pointer in debugfs

Eric Snowberg <eric.snowberg@oracle.com>
    debugfs: Return -EPERM when locked down

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    serial: imx: fix a race condition in receive path

Lukas Wunner <lukas@wunner.de>
    serial: 8250_bcm2835aux: Fix line mismatch on driver unbind

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: Fix false Tx excessive retries reporting.

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: use NULLFUCTION stack on mac80211

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: correct packet types for CTS protect, mode.

Colin Ian King <colin.king@canonical.com>
    staging: wlan-ng: ensure error return is actually returned

Andrey Shvetsov <andrey.shvetsov@k2l.de>
    staging: most: net: fix buffer overflow

Thomas Hebb <tommyhebb@gmail.com>
    usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW

Thomas Hebb <tommyhebb@gmail.com>
    usb: typec: wcove: fix "op-sink-microwatt" default that was in mW

Bin Liu <b-liu@ti.com>
    usb: dwc3: turn off VBUS when leaving host mode

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: fix IrLAP framing

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: fix link-speed handling

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: add missing endpoint sanity check

Peter Robinson <pbrobinson@gmail.com>
    usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186

Heikki Krogerus <heikki.krogerus@linux.intel.com>
    usb: dwc3: pci: add ID for the Intel Comet Lake -V variant

Johan Hovold <johan@kernel.org>
    rsi_91x_usb: fix interface sanity check

Johan Hovold <johan@kernel.org>
    orinoco_usb: fix interface sanity check

Johan Hovold <johan@kernel.org>
    Bluetooth: btusb: fix non-atomic allocation in completion handler


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm64/kvm/debug.c                             |   6 +-
 arch/um/include/asm/common.lds.S                   |   2 +-
 arch/um/kernel/dyn.lds.S                           |   1 +
 crypto/af_alg.c                                    |   6 +-
 crypto/pcrypt.c                                    |   3 +-
 drivers/android/binder.c                           |  37 +++---
 drivers/base/component.c                           |   8 +-
 drivers/base/test/test_async_driver_probe.c        |   3 +-
 drivers/bluetooth/btusb.c                          |   2 +-
 drivers/crypto/caam/ctrl.c                         |   6 +-
 drivers/crypto/chelsio/chcr_algo.c                 |  16 +--
 drivers/crypto/vmx/aes_xts.c                       |   3 +
 drivers/iio/adc/stm32-dfsdm-adc.c                  |   2 +
 drivers/iio/gyro/st_gyro_core.c                    |  75 +++++++++++-
 drivers/misc/mei/hdcp/mei_hdcp.c                   |  33 ++++-
 drivers/misc/mei/hw-me-regs.h                      |   6 +
 drivers/misc/mei/pci-me.c                          |   4 +
 drivers/net/ethernet/marvell/mvneta.c              |   6 +
 drivers/net/ethernet/mellanox/mlxsw/minimal.c      |   2 +-
 drivers/net/ethernet/socionext/netsec.c            |   4 +-
 drivers/net/wireless/ath/ath9k/hif_usb.c           |   2 +-
 .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c |   4 +-
 .../net/wireless/intersil/orinoco/orinoco_usb.c    |   4 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  |   2 +-
 drivers/net/wireless/rsi/rsi_91x_hal.c             |  12 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |  37 ++++--
 drivers/net/wireless/zydas/zd1211rw/zd_usb.c       |   2 +-
 drivers/power/supply/ingenic-battery.c             |  15 ++-
 drivers/staging/most/net/net.c                     |  10 ++
 drivers/staging/vt6656/device.h                    |   2 +
 drivers/staging/vt6656/int.c                       |   6 +-
 drivers/staging/vt6656/main_usb.c                  |   1 +
 drivers/staging/vt6656/rxtx.c                      |  26 ++--
 drivers/staging/wlan-ng/prism2mgmt.c               |   2 +-
 drivers/tty/serial/8250/8250_bcm2835aux.c          |   2 +-
 drivers/tty/serial/imx.c                           |  51 ++++++--
 drivers/usb/dwc3/core.c                            |   3 +
 drivers/usb/dwc3/dwc3-pci.c                        |   4 +
 drivers/usb/host/xhci-tegra.c                      |   1 +
 drivers/usb/serial/ir-usb.c                        | 136 ++++++++++++++++-----
 drivers/usb/typec/tcpm/fusb302.c                   |   2 +-
 drivers/usb/typec/tcpm/wcove.c                     |   2 +-
 fs/cifs/cifsglob.h                                 |   1 +
 fs/cifs/smb2misc.c                                 |   2 +-
 fs/cifs/smb2ops.c                                  |   9 +-
 fs/cifs/smb2transport.c                            |   2 +
 fs/cifs/transport.c                                |   3 +
 fs/debugfs/file.c                                  |  17 +--
 include/linux/usb/irda.h                           |  13 +-
 include/net/pkt_cls.h                              |  33 ++---
 include/net/sch_generic.h                          |   3 +-
 include/net/udp.h                                  |   3 +
 init/Kconfig                                       |   1 +
 kernel/gcov/Kconfig                                |   2 +-
 net/ipv4/nexthop.c                                 |   4 +-
 net/rxrpc/input.c                                  |  12 +-
 net/sched/cls_basic.c                              |  11 +-
 net/sched/cls_bpf.c                                |  11 +-
 net/sched/cls_flower.c                             |  11 +-
 net/sched/cls_fw.c                                 |  11 +-
 net/sched/cls_matchall.c                           |  11 +-
 net/sched/cls_route.c                              |  11 +-
 net/sched/cls_rsvp.h                               |  11 +-
 net/sched/cls_tcindex.c                            |  11 +-
 net/sched/cls_u32.c                                |  11 +-
 net/sched/ematch.c                                 |   3 +
 net/sched/sch_api.c                                |  47 +++++--
 68 files changed, 591 insertions(+), 218 deletions(-)

[PATCH 5.5 01/56] Bluetooth: btusb: fix non-atomic allocation in completion handler

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 22cc6b7a1dbb58da4afc539d9b7d470b23a25eea upstream.

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Cc: stable <stable@vger.kernel.org>     # 5.3
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2602,7 +2602,7 @@ static void btusb_mtk_wmt_recv(struct ur
 		 * and being processed the events from there then.
 		 */
 		if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
-			data->evt_skb = skb_clone(skb, GFP_KERNEL);
+			data->evt_skb = skb_clone(skb, GFP_ATOMIC);
 			if (!data->evt_skb)
 				goto err_out;
 		}

[PATCH 5.5 02/56] orinoco_usb: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intersil/orinoco/orinoco_usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
@@ -1608,9 +1608,9 @@ static int ezusb_probe(struct usb_interf
 	/* set up the endpoint information */
 	/* check out the endpoints */
 
-	iface_desc = &interface->altsetting[0].desc;
+	iface_desc = &interface->cur_altsetting->desc;
 	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-		ep = &interface->altsetting[0].endpoint[i].desc;
+		ep = &interface->cur_altsetting->endpoint[i].desc;
 
 		if (usb_endpoint_is_bulk_in(ep)) {
 			/* we found a bulk in endpoint */

[PATCH 5.5 03/56] rsi_91x_usb: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3139b180906af43bc09bd3373fc2338a8271d9d9 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -117,7 +117,7 @@ static int rsi_find_bulk_in_and_out_endp
 	__le16 buffer_size;
 	int ii, bin_found = 0, bout_found = 0;
 
-	iface_desc = &(interface->altsetting[0]);
+	iface_desc = interface->cur_altsetting;
 
 	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
 		endpoint = &(iface_desc->endpoint[ii].desc);

[PATCH 5.5 04/56] usb: dwc3: pci: add ID for the Intel Comet Lake -V variant

[Greg Kroah-Hartman]

From: Heikki Krogerus <heikki.krogerus@linux.intel.com>

commit f5ae8869095552e3396ee3e404f9586cc6a828f0 upstream.

There is one more Comet Lake PCH variant, CML-V, that has
its own PCI ID.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200117093033.48616-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/dwc3-pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -34,6 +34,7 @@
 #define PCI_DEVICE_ID_INTEL_GLK			0x31aa
 #define PCI_DEVICE_ID_INTEL_CNPLP		0x9dee
 #define PCI_DEVICE_ID_INTEL_CNPH		0xa36e
+#define PCI_DEVICE_ID_INTEL_CNPV		0xa3b0
 #define PCI_DEVICE_ID_INTEL_ICLLP		0x34ee
 #define PCI_DEVICE_ID_INTEL_EHLLP		0x4b7e
 #define PCI_DEVICE_ID_INTEL_TGPLP		0xa0ee
@@ -342,6 +343,9 @@ static const struct pci_device_id dwc3_p
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH),
 	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
 
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV),
+	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
+
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP),
 	  (kernel_ulong_t) &dwc3_pci_intel_properties, },
 

[PATCH 5.5 05/56] usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186

[Greg Kroah-Hartman]

From: Peter Robinson <pbrobinson@gmail.com>

commit e1f236efd9c579a29d7df75aa052127d0d975267 upstream.

Set the MODULE_FIRMWARE for tegra186, it's registered for 124/210 and
ensures the firmware is available at the appropriate time such as in
the initrd, else if the firmware is unavailable the driver fails with
the following errors:

tegra-xusb 3530000.usb: Direct firmware load for nvidia/tegra186/xusb.bin failed with error -2
tegra-xusb 3530000.usb: failed to request firmware: -2
tegra-xusb 3530000.usb: failed to load firmware: -2
tegra-xusb: probe of 3530000.usb failed with error -2

Fixes: 5f9be5f3f899 ("usb: host: xhci-tegra: Add Tegra186 XUSB support")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120141910.116097-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-tegra.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1432,6 +1432,7 @@ MODULE_FIRMWARE("nvidia/tegra210/xusb.bi
 
 static const char * const tegra186_supply_names[] = {
 };
+MODULE_FIRMWARE("nvidia/tegra186/xusb.bin");
 
 static const struct tegra_xusb_phy_type tegra186_phy_types[] = {
 	{ .name = "usb3", .num = 3, },

[PATCH 5.5 06/56] USB: serial: ir-usb: add missing endpoint sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 2988a8ae7476fe9535ab620320790d1714bdad1d upstream.

Add missing endpoint sanity check to avoid dereferencing a NULL-pointer
on open() in case a device lacks a bulk-out endpoint.

Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using
generic framework") the oops would instead happen on open() if the
device lacked a bulk-in endpoint and on write() if it lacked a bulk-out
endpoint.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -195,6 +195,9 @@ static int ir_startup(struct usb_serial
 	struct usb_irda_cs_descriptor *irda_desc;
 	int rates;
 
+	if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1)
+		return -ENODEV;
+
 	irda_desc = irda_usb_find_class_desc(serial, 0);
 	if (!irda_desc) {
 		dev_err(&serial->dev->dev,

[PATCH 5.5 07/56] USB: serial: ir-usb: fix link-speed handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org>     # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |   20 ++++++++++----------
 include/linux/usb/irda.h    |   13 ++++++++++++-
 2 files changed, 22 insertions(+), 11 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -335,34 +335,34 @@ static void ir_set_termios(struct tty_st
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *

[PATCH 5.5 08/56] USB: serial: ir-usb: fix IrLAP framing

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 38c0d5bdf4973f9f5a888166e9d3e9ed0d32057a upstream.

Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
switched to using the generic write implementation which may combine
multiple write requests into larger transfers. This can break the IrLAP
protocol where end-of-frame is determined using the USB short packet
mechanism, for example, if multiple frames are sent in rapid succession.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |  113 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 91 insertions(+), 22 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -45,9 +45,10 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
 static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
@@ -77,8 +78,9 @@ static struct usb_serial_driver ir_devic
 	.num_ports		= 1,
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
-	.open			= ir_open,
-	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.write			= ir_write,
+	.write_room		= ir_write_room,
+	.write_bulk_callback	= ir_write_bulk_callback,
 	.process_read_urb	= ir_process_read_urb,
 };
 
@@ -254,35 +256,102 @@ static int ir_startup(struct usb_serial
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
 {
-	int i;
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+	if (port->bulk_out_size == 0)
+		return -EINVAL;
 
-	/* Start reading from the device */
-	return usb_serial_generic_open(tty, port);
-}
+	if (count == 0)
+		return 0;
 
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size)
-{
-	unsigned char *buf = dest;
-	int count;
+	count = min(count, port->bulk_out_size - 1);
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+		urb = port->write_urbs[0];
+		port->tx_bytes += count;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!urb)
+		return 0;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
-	 * inbound header which indicates an additional number of BOFs and
+	 * outbound header which indicates an additional number of BOFs and
 	 * a baud rate change.
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*buf = ir_xbof | ir_baud;
+	*(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+	memcpy(urb->transfer_buffer + 1, buf, count);
+
+	urb->transfer_buffer_length = count + 1;
+	urb->transfer_flags = URB_ZERO_PACKET;
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+		spin_lock_irqsave(&port->lock, flags);
+		__set_bit(0, &port->write_urbs_free);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__set_bit(0, &port->write_urbs_free);
+	port->tx_bytes -= urb->transfer_buffer_length - 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	default:
+		dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+		break;
+	}
+
+	usb_serial_port_softint(port);
+}
+
+static int ir_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int count = 0;
+
+	if (port->bulk_out_size == 0)
+		return 0;
+
+	if (test_bit(0, &port->write_urbs_free))
+		count = port->bulk_out_size - 1;
 
-	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
-								&port->lock);
-	return count + 1;
+	return count;
 }
 
 static void ir_process_read_urb(struct urb *urb)

[PATCH 5.5 09/56] usb: dwc3: turn off VBUS when leaving host mode

[Greg Kroah-Hartman]

From: Bin Liu <b-liu@ti.com>

commit 09ed259fac621634d51cd986aa8d65f035662658 upstream.

VBUS should be turned off when leaving the host mode.
Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to
turn off VBUS power.

Fixes: 5f94adfeed97 ("usb: dwc3: core: refactor mode initialization to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1246,6 +1246,9 @@ static void dwc3_core_exit_mode(struct d
 		/* do nothing */
 		break;
 	}
+
+	/* de-assert DRVVBUS for HOST and OTG mode */
+	dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 }
 
 static void dwc3_get_properties(struct dwc3 *dwc)

[PATCH 5.5 10/56] usb: typec: wcove: fix "op-sink-microwatt" default that was in mW

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

commit 0e64350bf4668d0fbbfec66fd8e637b971b4e976 upstream.

commit 4c912bff46cc ("usb: typec: wcove: Provide fwnode for the port")
didn't convert this value from mW to uW when migrating to a new
specification format like it should have.

Fixes: 4c912bff46cc ("usb: typec: wcove: Provide fwnode for the port")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/d8be32512efd31995ad7d65b27df9d443131b07c.1579529334.git.tommyhebb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/typec/tcpm/wcove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -597,7 +597,7 @@ static const struct property_entry wcove
 	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
 	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
 	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
-	PROPERTY_ENTRY_U32("op-sink-microwatt", 15000),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 15000000),
 	{ }
 };
 

[PATCH 5.5 11/56] usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

commit eb7a3bb8c955b3694e0e0998413ce1563c02f90c upstream.

commit 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the
port") didn't convert this value from mW to uW when migrating to a new
specification format like it should have.

Fixes: 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the port")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/0da564559af75ec829c6c7e3aa4024f857c91bee.1579529334.git.tommyhebb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/typec/tcpm/fusb302.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1666,7 +1666,7 @@ static const struct property_entry port_
 	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
 	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
 	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
-	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
 	{ }
 };
 

[PATCH 5.5 12/56] staging: most: net: fix buffer overflow

[Greg Kroah-Hartman]

From: Andrey Shvetsov <andrey.shvetsov@k2l.de>

commit 4d1356ac12f4d5180d0df345d85ff0ee42b89c72 upstream.

If the length of the socket buffer is 0xFFFFFFFF (max size for an
unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14
(ETH_HLEN).  Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN)
which overflows and results in a value of 2.  These values for
payload_len and mdp_len will pass current buffer size checks.

This patch checks if derived from skb->len sum may overflow.

The check is based on the following idea:

For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`,
`V1 + V2` overflows iif `SUM < V1`.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200116172238.6046-1-andrey.shvetsov@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/most/net/net.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/staging/most/net/net.c
+++ b/drivers/staging/most/net/net.c
@@ -81,6 +81,11 @@ static int skb_to_mamac(const struct sk_
 	unsigned int payload_len = skb->len - ETH_HLEN;
 	unsigned int mdp_len = payload_len + MDP_HDR_LEN;
 
+	if (mdp_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mdp_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mdp_len);
@@ -128,6 +133,11 @@ static int skb_to_mep(const struct sk_bu
 	u8 *buff = mbo->virt_address;
 	unsigned int mep_len = skb->len + MEP_HDR_LEN;
 
+	if (mep_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mep_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mep_len);

[PATCH 5.5 13/56] staging: wlan-ng: ensure error return is actually returned

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 4cc41cbce536876678b35e03c4a8a7bb72c78fa9 upstream.

Currently when the call to prism2sta_ifst fails a netdev_err error
is reported, error return variable result is set to -1 but the
function always returns 0 for success.  Fix this by returning
the error value in variable result rather than 0.

Addresses-Coverity: ("Unused value")
Fixes: 00b3ed168508 ("Staging: add wlan-ng prism2 usb driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/prism2mgmt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -959,7 +959,7 @@ int prism2mgmt_flashdl_state(struct wlan
 		}
 	}
 
-	return 0;
+	return result;
 }
 
 /*----------------------------------------------------------------

[PATCH 5.5 14/56] staging: vt6656: correct packet types for CTS protect, mode.

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit d971fdd3412f8342747778fb59b8803720ed82b1 upstream.

It appears that the driver still transmits in CTS protect mode even
though it is not enabled in mac80211.

That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect.
The only difference between them GA does not use B rates.

Find if only B rate in GB or GA in protect mode otherwise transmit packets
as PK_TYPE_11A.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/9c1323ff-dbb3-0eaa-43e1-9453f7390dc0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/device.h |    2 ++
 drivers/staging/vt6656/rxtx.c   |   12 ++++++++----
 2 files changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -52,6 +52,8 @@
 #define RATE_AUTO	12
 
 #define MAX_RATE			12
+#define VNT_B_RATES	(BIT(RATE_1M) | BIT(RATE_2M) |\
+			BIT(RATE_5M) | BIT(RATE_11M))
 
 /*
  * device specific
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -815,10 +815,14 @@ int vnt_tx_packet(struct vnt_private *pr
 		if (info->band == NL80211_BAND_5GHZ) {
 			pkt_type = PK_TYPE_11A;
 		} else {
-			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
-				pkt_type = PK_TYPE_11GB;
-			else
-				pkt_type = PK_TYPE_11GA;
+			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+				if (priv->basic_rates & VNT_B_RATES)
+					pkt_type = PK_TYPE_11GB;
+				else
+					pkt_type = PK_TYPE_11GA;
+			} else {
+				pkt_type = PK_TYPE_11A;
+			}
 		}
 	} else {
 		pkt_type = PK_TYPE_11B;

[PATCH 5.5 15/56] staging: vt6656: use NULLFUCTION stack on mac80211

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit d579c43c82f093e63639151625b2139166c730fd upstream.

It appears that the drivers does not go into power save correctly the
NULL data packets are not being transmitted because it not enabled
in mac80211.

The driver needs to capture ieee80211_is_nullfunc headers and
copy the duration_id to it's own duration data header.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/610971ae-555b-a6c3-61b3-444a0c1e35b4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/main_usb.c |    1 +
 drivers/staging/vt6656/rxtx.c     |   14 +++++---------
 2 files changed, 6 insertions(+), 9 deletions(-)

--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1015,6 +1015,7 @@ vt6656_probe(struct usb_interface *intf,
 	ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
 	ieee80211_hw_set(priv->hw, REPORTS_TX_ACK_STATUS);
 	ieee80211_hw_set(priv->hw, SUPPORTS_PS);
+	ieee80211_hw_set(priv->hw, PS_NULLFUNC_STACK);
 
 	priv->hw->max_signal = 100;
 
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -278,11 +278,9 @@ static u16 vnt_rxtx_datahead_g(struct vn
 			  PK_TYPE_11B, &buf->b);
 
 	/* Get Duration and TimeStamp */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration_a = dur;
-		buf->duration_b = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration_a = hdr->duration_id;
+		buf->duration_b = hdr->duration_id;
 	} else {
 		buf->duration_a = vnt_get_duration_le(priv,
 						tx_context->pkt_type, need_ack);
@@ -371,10 +369,8 @@ static u16 vnt_rxtx_datahead_ab(struct v
 			  tx_context->pkt_type, &buf->ab);
 
 	/* Get Duration and TimeStampOff */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration = hdr->duration_id;
 	} else {
 		buf->duration = vnt_get_duration_le(priv, tx_context->pkt_type,
 						    need_ack);

[PATCH 5.5 16/56] staging: vt6656: Fix false Tx excessive retries reporting.

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 9dd631fa99dc0a0dfbd191173bf355ba30ea786a upstream.

The driver reporting  IEEE80211_TX_STAT_ACK is not being handled
correctly. The driver should only report on TSR_TMO flag is not
set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK
is being requested.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/int.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/staging/vt6656/int.c
+++ b/drivers/staging/vt6656/int.c
@@ -99,9 +99,11 @@ static int vnt_int_report_rate(struct vn
 
 	info->status.rates[0].count = tx_retry;
 
-	if (!(tsr & (TSR_TMO | TSR_RETRYTMO))) {
+	if (!(tsr & TSR_TMO)) {
 		info->status.rates[0].idx = idx;
-		info->flags |= IEEE80211_TX_STAT_ACK;
+
+		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+			info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
 	ieee80211_tx_status_irqsafe(priv->hw, context->skb);

[PATCH 5.5 17/56] serial: 8250_bcm2835aux: Fix line mismatch on driver unbind

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit dc76697d7e933d5e299116f219c890568785ea15 upstream.

Unbinding the bcm2835aux UART driver raises the following error if the
maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module
parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS):

(NULL device *): Removing wrong port: a6f80333 != fa20408b

That's because bcm2835aux_serial_probe() retrieves UART line number 1
from the devicetree and stores it in data->uart.port.line, while
serial8250_register_8250_port() instead uses UART line number 0,
which is stored in data->line.

On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line,
which contains the wrong number.  Fix it.

The issue does not occur if the maximum number of 8250 UARTs is >= 2.

Fixes: bdc5f3009580 ("serial: bcm2835: add driver for bcm2835-aux-uart")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.6+
Cc: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/912ccf553c5258135c6d7e8f404a101ef320f0f4.1579175223.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_bcm2835aux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -113,7 +113,7 @@ static int bcm2835aux_serial_remove(stru
 {
 	struct bcm2835aux_data *data = platform_get_drvdata(pdev);
 
-	serial8250_unregister_port(data->uart.port.line);
+	serial8250_unregister_port(data->line);
 	clk_disable_unprepare(data->clk);
 
 	return 0;

[PATCH 5.5 18/56] serial: imx: fix a race condition in receive path

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 101aa46bd221b768dfff8ef3745173fc8dbb85ee upstream.

The main irq handler function starts by first masking disabled
interrupts in the status register values to ensure to only handle
enabled interrupts. This is important as when the RX path in the
hardware is disabled reading the RX fifo results in an external abort.

This checking must be done under the port lock, otherwise the following
can happen:

     CPU1                            | CPU2
                                     |
     irq triggers as there are chars |
     in the RX fifo                  |
				     | grab port lock
     imx_uart_int finds RRDY enabled |
     and calls imx_uart_rxint which  |
     has to wait for port lock       |
                                     | disable RX (e.g. because we're
                                     | using RS485 with !RX_DURING_TX)
                                     |
                                     | release port lock
     read from RX fifo with RX       |
     disabled => exception           |

So take the port lock only once in imx_uart_int() instead of in the
functions called from there.

Reported-by: Andre Renaud <arenaud@designa-electronics.com>
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20200121071702.20150-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/imx.c |   51 +++++++++++++++++++++++++++++++++++------------
 1 file changed, 38 insertions(+), 13 deletions(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -700,22 +700,33 @@ static void imx_uart_start_tx(struct uar
 	}
 }
 
-static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	u32 usr1;
 
-	spin_lock(&sport->port.lock);
-
 	imx_uart_writel(sport, USR1_RTSD, USR1);
 	usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
 	uart_handle_cts_change(&sport->port, !!usr1);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
-	spin_unlock(&sport->port.lock);
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	irqreturn_t ret;
+
+	spin_lock(&sport->port.lock);
+
+	ret = __imx_uart_rtsint(irq, dev_id);
+
+	spin_unlock(&sport->port.lock);
+
+	return ret;
+}
+
 static irqreturn_t imx_uart_txint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
@@ -726,14 +737,12 @@ static irqreturn_t imx_uart_txint(int ir
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	unsigned int rx, flg, ignored = 0;
 	struct tty_port *port = &sport->port.state->port;
 
-	spin_lock(&sport->port.lock);
-
 	while (imx_uart_readl(sport, USR2) & USR2_RDR) {
 		u32 usr2;
 
@@ -792,11 +801,25 @@ static irqreturn_t imx_uart_rxint(int ir
 	}
 
 out:
-	spin_unlock(&sport->port.lock);
 	tty_flip_buffer_push(port);
+
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	irqreturn_t ret;
+
+	spin_lock(&sport->port.lock);
+
+	ret = __imx_uart_rxint(irq, dev_id);
+
+	spin_unlock(&sport->port.lock);
+
+	return ret;
+}
+
 static void imx_uart_clear_rx_errors(struct imx_port *sport);
 
 /*
@@ -855,6 +878,8 @@ static irqreturn_t imx_uart_int(int irq,
 	unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4;
 	irqreturn_t ret = IRQ_NONE;
 
+	spin_lock(&sport->port.lock);
+
 	usr1 = imx_uart_readl(sport, USR1);
 	usr2 = imx_uart_readl(sport, USR2);
 	ucr1 = imx_uart_readl(sport, UCR1);
@@ -888,27 +913,25 @@ static irqreturn_t imx_uart_int(int irq,
 		usr2 &= ~USR2_ORE;
 
 	if (usr1 & (USR1_RRDY | USR1_AGTIM)) {
-		imx_uart_rxint(irq, dev_id);
+		__imx_uart_rxint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
 	if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) {
-		imx_uart_txint(irq, dev_id);
+		imx_uart_transmit_buffer(sport);
 		ret = IRQ_HANDLED;
 	}
 
 	if (usr1 & USR1_DTRD) {
 		imx_uart_writel(sport, USR1_DTRD, USR1);
 
-		spin_lock(&sport->port.lock);
 		imx_uart_mctrl_check(sport);
-		spin_unlock(&sport->port.lock);
 
 		ret = IRQ_HANDLED;
 	}
 
 	if (usr1 & USR1_RTSD) {
-		imx_uart_rtsint(irq, dev_id);
+		__imx_uart_rtsint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
@@ -923,6 +946,8 @@ static irqreturn_t imx_uart_int(int irq,
 		ret = IRQ_HANDLED;
 	}
 
+	spin_unlock(&sport->port.lock);
+
 	return ret;
 }
 

[PATCH 5.5 19/56] debugfs: Return -EPERM when locked down

[Greg Kroah-Hartman]

From: Eric Snowberg <eric.snowberg@oracle.com>

commit a37f4958f7b63d2b3cd17a76151fdfc29ce1da5f upstream.

When lockdown is enabled, debugfs_is_locked_down returns 1. It will then
trigger the following:

WARNING: CPU: 48 PID: 3747
CPU: 48 PID: 3743 Comm: bash Not tainted 5.4.0-1946.x86_64 #1
Hardware name: Oracle Corporation ORACLE SERVER X7-2/ASM, MB, X7-2, BIOS 41060400 05/20/2019
RIP: 0010:do_dentry_open+0x343/0x3a0
Code: 00 40 08 00 45 31 ff 48 c7 43 28 40 5b e7 89 e9 02 ff ff ff 48 8b 53 28 4c 8b 72 70 4d 85 f6 0f 84 10 fe ff ff e9 f5 fd ff ff <0f> 0b 41 bf ea ff ff ff e9 3b ff ff ff 41 bf e6 ff ff ff e9 b4 fe
RSP: 0018:ffffb8740dde7ca0 EFLAGS: 00010202
RAX: ffffffff89e88a40 RBX: ffff928c8e6b6f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff928dbfd97778 RDI: ffff9285cff685c0
RBP: ffffb8740dde7cc8 R08: 0000000000000821 R09: 0000000000000030
R10: 0000000000000057 R11: ffffb8740dde7a98 R12: ffff926ec781c900
R13: ffff928c8e6b6f10 R14: ffffffff8936e190 R15: 0000000000000001
FS:  00007f45f6777740(0000) GS:ffff928dbfd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff95e0d5d8 CR3: 0000001ece562006 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 vfs_open+0x2d/0x30
 path_openat+0x2d4/0x1680
 ? tty_mode_ioctl+0x298/0x4c0
 do_filp_open+0x93/0x100
 ? strncpy_from_user+0x57/0x1b0
 ? __alloc_fd+0x46/0x150
 do_sys_open+0x182/0x230
 __x64_sys_openat+0x20/0x30
 do_syscall_64+0x60/0x1b0
 entry_SYSCALL_64_after_hwframe+0x170/0x1d5
RIP: 0033:0x7f45f5e5ce02
Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 25 59 2d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
RSP: 002b:00007fff95e0d2e0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 0000561178c069b0 RCX: 00007f45f5e5ce02
RDX: 0000000000000241 RSI: 0000561178c08800 RDI: 00000000ffffff9c
RBP: 00007fff95e0d3e0 R08: 0000000000000020 R09: 0000000000000005
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 0000561178c08800

Change the return type to int and return -EPERM when lockdown is enabled
to remove the warning above. Also rename debugfs_is_locked_down to
debugfs_locked_down to make it sound less like it returns a boolean.

Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable <stable@vger.kernel.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20191207161603.35907-1-eric.snowberg@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/debugfs/file.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -142,18 +142,21 @@ EXPORT_SYMBOL_GPL(debugfs_file_put);
  * We also need to exclude any file that has ways to write or alter it as root
  * can bypass the permissions check.
  */
-static bool debugfs_is_locked_down(struct inode *inode,
-				   struct file *filp,
-				   const struct file_operations *real_fops)
+static int debugfs_locked_down(struct inode *inode,
+			       struct file *filp,
+			       const struct file_operations *real_fops)
 {
 	if ((inode->i_mode & 07777) == 0444 &&
 	    !(filp->f_mode & FMODE_WRITE) &&
 	    !real_fops->unlocked_ioctl &&
 	    !real_fops->compat_ioctl &&
 	    !real_fops->mmap)
-		return false;
+		return 0;
 
-	return security_locked_down(LOCKDOWN_DEBUGFS);
+	if (security_locked_down(LOCKDOWN_DEBUGFS))
+		return -EPERM;
+
+	return 0;
 }
 
 static int open_proxy_open(struct inode *inode, struct file *filp)
@@ -168,7 +171,7 @@ static int open_proxy_open(struct inode
 
 	real_fops = debugfs_real_fops(filp);
 
-	r = debugfs_is_locked_down(inode, filp, real_fops);
+	r = debugfs_locked_down(inode, filp, real_fops);
 	if (r)
 		goto out;
 
@@ -298,7 +301,7 @@ static int full_proxy_open(struct inode
 
 	real_fops = debugfs_real_fops(filp);
 
-	r = debugfs_is_locked_down(inode, filp, real_fops);
+	r = debugfs_locked_down(inode, filp, real_fops);
 	if (r)
 		goto out;
 

[PATCH 5.5 20/56] component: do not dereference opaque pointer in debugfs

[Greg Kroah-Hartman]

From: Lubomir Rintel <lkundrak@v3.sk>

commit ef9ffc1e5f1ac73ecd2fb3b70db2a3b2472ff2f7 upstream.

The match data does not have to be a struct device pointer, and indeed
very often is not. Attempt to treat it as such easily results in a
crash.

For the components that are not registered, we don't know which device
is missing. Once it it is there, we can use the struct component to get
the device and whether it's bound or not.

Fixes: 59e73854b5fd ('component: add debugfs support')
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@vger.kernel.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/component.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -102,11 +102,11 @@ static int component_devices_show(struct
 	seq_printf(s, "%-40s %20s\n", "device name", "status");
 	seq_puts(s, "-------------------------------------------------------------\n");
 	for (i = 0; i < match->num; i++) {
-		struct device *d = (struct device *)match->compare[i].data;
+		struct component *component = match->compare[i].component;
 
-		seq_printf(s, "%-40s %20s\n", dev_name(d),
-			   match->compare[i].component ?
-			   "registered" : "not registered");
+		seq_printf(s, "%-40s %20s\n",
+			   component ? dev_name(component->dev) : "(unknown)",
+			   component ? (component->bound ? "bound" : "not bound") : "not registered");
 	}
 	mutex_unlock(&component_mutex);
 

[PATCH 5.5 21/56] binder: fix log spam for existing debugfs file creation.

[Greg Kroah-Hartman]

From: Martin Fuzzey <martin.fuzzey@flowbird.group>

commit eb143f8756e77c8fcfc4d574922ae9efd3a43ca9 upstream.

Since commit 43e23b6c0b01 ("debugfs: log errors when something goes wrong")
debugfs logs attempts to create existing files.

However binder attempts to create multiple debugfs files with
the same name when a single PID has multiple contexts, this leads
to log spamming during an Android boot (17 such messages during
boot on my system).

Fix this by checking if we already know the PID and only create
the debugfs entry for the first context per PID.

Do the same thing for binderfs for symmetry.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Acked-by: Todd Kjos <tkjos@google.com>
Fixes: 43e23b6c0b01 ("debugfs: log errors when something goes wrong")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1578671054-5982-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/android/binder.c |   37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -5199,10 +5199,11 @@ err_bad_arg:
 
 static int binder_open(struct inode *nodp, struct file *filp)
 {
-	struct binder_proc *proc;
+	struct binder_proc *proc, *itr;
 	struct binder_device *binder_dev;
 	struct binderfs_info *info;
 	struct dentry *binder_binderfs_dir_entry_proc = NULL;
+	bool existing_pid = false;
 
 	binder_debug(BINDER_DEBUG_OPEN_CLOSE, "%s: %d:%d\n", __func__,
 		     current->group_leader->pid, current->pid);
@@ -5235,19 +5236,24 @@ static int binder_open(struct inode *nod
 	filp->private_data = proc;
 
 	mutex_lock(&binder_procs_lock);
+	hlist_for_each_entry(itr, &binder_procs, proc_node) {
+		if (itr->pid == proc->pid) {
+			existing_pid = true;
+			break;
+		}
+	}
 	hlist_add_head(&proc->proc_node, &binder_procs);
 	mutex_unlock(&binder_procs_lock);
 
-	if (binder_debugfs_dir_entry_proc) {
+	if (binder_debugfs_dir_entry_proc && !existing_pid) {
 		char strbuf[11];
 
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		/*
-		 * proc debug entries are shared between contexts, so
-		 * this will fail if the process tries to open the driver
-		 * again with a different context. The priting code will
-		 * anyway print all contexts that a given PID has, so this
-		 * is not a problem.
+		 * proc debug entries are shared between contexts.
+		 * Only create for the first PID to avoid debugfs log spamming
+		 * The printing code will anyway print all contexts for a given
+		 * PID so this is not a problem.
 		 */
 		proc->debugfs_entry = debugfs_create_file(strbuf, 0444,
 			binder_debugfs_dir_entry_proc,
@@ -5255,19 +5261,16 @@ static int binder_open(struct inode *nod
 			&proc_fops);
 	}
 
-	if (binder_binderfs_dir_entry_proc) {
+	if (binder_binderfs_dir_entry_proc && !existing_pid) {
 		char strbuf[11];
 		struct dentry *binderfs_entry;
 
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		/*
 		 * Similar to debugfs, the process specific log file is shared
-		 * between contexts. If the file has already been created for a
-		 * process, the following binderfs_create_file() call will
-		 * fail with error code EEXIST if another context of the same
-		 * process invoked binder_open(). This is ok since same as
-		 * debugfs, the log file will contain information on all
-		 * contexts of a given PID.
+		 * between contexts. Only create for the first PID.
+		 * This is ok since same as debugfs, the log file will contain
+		 * information on all contexts of a given PID.
 		 */
 		binderfs_entry = binderfs_create_file(binder_binderfs_dir_entry_proc,
 			strbuf, &proc_fops, (void *)(unsigned long)proc->pid);
@@ -5277,10 +5280,8 @@ static int binder_open(struct inode *nod
 			int error;
 
 			error = PTR_ERR(binderfs_entry);
-			if (error != -EEXIST) {
-				pr_warn("Unable to create file %s in binderfs (error %d)\n",
-					strbuf, error);
-			}
+			pr_warn("Unable to create file %s in binderfs (error %d)\n",
+				strbuf, error);
 		}
 	}
 

[PATCH 5.5 22/56] mei: hdcp: bind only with i915 on the same PCH

[Greg Kroah-Hartman]

From: Tomas Winkler <tomas.winkler@intel.com>

commit 1e8d19d9b0dfcf11b61bac627203a290577e807a upstream.

The mei device and i915 must reside on the same
PCH in order for HDCP to work. Make the component
matching function enforce this requirement.

                   hdcp
                    |
   i915            mei
    |               |
    +----= PCH =----+

Cc: <stable@vger.kernel.org> v5.0+
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20191212084103.2893-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/mei/hdcp/mei_hdcp.c |   33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -757,11 +757,38 @@ static const struct component_master_ops
 	.unbind = mei_component_master_unbind,
 };
 
+/**
+ * mei_hdcp_component_match - compare function for matching mei hdcp.
+ *
+ *    The function checks if the driver is i915, the subcomponent is HDCP
+ *    and the grand parent of hdcp and the parent of i915 are the same
+ *    PCH device.
+ *
+ * @dev: master device
+ * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP)
+ * @data: compare data (mei hdcp device)
+ *
+ * Return:
+ * * 1 - if components match
+ * * 0 - otherwise
+ */
 static int mei_hdcp_component_match(struct device *dev, int subcomponent,
 				    void *data)
 {
-	return !strcmp(dev->driver->name, "i915") &&
-	       subcomponent == I915_COMPONENT_HDCP;
+	struct device *base = data;
+
+	if (strcmp(dev->driver->name, "i915") ||
+	    subcomponent != I915_COMPONENT_HDCP)
+		return 0;
+
+	base = base->parent;
+	if (!base)
+		return 0;
+
+	base = base->parent;
+	dev = dev->parent;
+
+	return (base && dev && dev == base);
 }
 
 static int mei_hdcp_probe(struct mei_cl_device *cldev,
@@ -785,7 +812,7 @@ static int mei_hdcp_probe(struct mei_cl_
 
 	master_match = NULL;
 	component_match_add_typed(&cldev->dev, &master_match,
-				  mei_hdcp_component_match, comp_master);
+				  mei_hdcp_component_match, &cldev->dev);
 	if (IS_ERR_OR_NULL(master_match)) {
 		ret = -ENOMEM;
 		goto err_exit;

[PATCH 5.5 23/56] mei: me: add comet point (lake) H device ids

[Greg Kroah-Hartman]

From: Tomas Winkler <tomas.winkler@intel.com>

commit 559e575a8946a6561dfe8880de341d4ef78d5994 upstream.

Add Comet Point device IDs for Comet Lake H platforms.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200119094229.20116-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/mei/hw-me-regs.h |    4 ++++
 drivers/misc/mei/pci-me.c     |    2 ++
 2 files changed, 6 insertions(+)

--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -81,8 +81,12 @@
 
 #define MEI_DEV_ID_CMP_LP     0x02e0  /* Comet Point LP */
 #define MEI_DEV_ID_CMP_LP_3   0x02e4  /* Comet Point LP 3 (iTouch) */
+
 #define MEI_DEV_ID_CMP_V      0xA3BA  /* Comet Point Lake V */
 
+#define MEI_DEV_ID_CMP_H      0x06e0  /* Comet Lake H */
+#define MEI_DEV_ID_CMP_H_3    0x06e4  /* Comet Lake H 3 (iTouch) */
+
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
 #define MEI_DEV_ID_TGP_LP     0xA0E0  /* Tiger Lake Point LP */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -99,6 +99,8 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_V, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
 

[PATCH 5.5 24/56] mei: me: add jasper point DID

[Greg Kroah-Hartman]

From: Tomas Winkler <tomas.winkler@intel.com>

commit 0db4a15d4c2787b1112001790d4f95bd2c5fed6f upstream.

Add Jasper Point (Jasper Lake) device id for MEI

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200124001455.24176-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/mei/hw-me-regs.h |    2 ++
 drivers/misc/mei/pci-me.c     |    2 ++
 2 files changed, 4 insertions(+)

--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -89,6 +89,8 @@
 
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
 
+#define MEI_DEV_ID_JSP_N      0x4DE0  /* Jasper Lake Point N */
+
 #define MEI_DEV_ID_TGP_LP     0xA0E0  /* Tiger Lake Point LP */
 
 #define MEI_DEV_ID_MCC        0x4B70  /* Mule Creek Canyon (EHL) */
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -106,6 +106,8 @@ static const struct pci_device_id mei_me
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_JSP_N, MEI_ME_PCH15_CFG)},
+
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MCC_4, MEI_ME_PCH8_CFG)},
 

[PATCH 5.5 25/56] iio: adc: stm32-dfsdm: fix single conversion

[Greg Kroah-Hartman]

From: Olivier Moysan <olivier.moysan@st.com>

commit dc26935fb60e8da8d59655dd2ec0de47b20d7d8f upstream.

Apply data formatting to single conversion,
as this is already done in continuous and trigger modes.

Fixes: 102afde62937 ("iio: adc: stm32-dfsdm: manage data resolution in trigger mode")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/stm32-dfsdm-adc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -1204,6 +1204,8 @@ static int stm32_dfsdm_single_conv(struc
 
 	stm32_dfsdm_stop_conv(adc);
 
+	stm32_dfsdm_process_data(adc, res);
+
 stop_dfsdm:
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
 

[PATCH 5.5 26/56] iio: st_gyro: Correct data for LSM9DS0 gyro

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit e825070f697abddf3b9b0a675ed0ff1884114818 upstream.

The commit 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID,
but datasheet tells slight different story, i.e. the first scale factor
for the chip is 245 dps, and not 250 dps.

Correct this by introducing a separate settings for LSM9DS0.

Fixes: 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
Depends-on: 45a4e4220bf4 ("iio: gyro: st_gyro: fix L3GD20H support")
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/gyro/st_gyro_core.c |   75 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 74 insertions(+), 1 deletion(-)

--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -138,7 +138,6 @@ static const struct st_sensor_settings s
 			[2] = LSM330DLC_GYRO_DEV_NAME,
 			[3] = L3G4IS_GYRO_DEV_NAME,
 			[4] = LSM330_GYRO_DEV_NAME,
-			[5] = LSM9DS0_GYRO_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
 		.odr = {
@@ -202,6 +201,80 @@ static const struct st_sensor_settings s
 			},
 		},
 		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0xd4,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM9DS0_GYRO_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 6),
+			.odr_avl = {
+				{ .hz = 95, .value = 0x00, },
+				{ .hz = 190, .value = 0x01, },
+				{ .hz = 380, .value = 0x02, },
+				{ .hz = 760, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = BIT(3),
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = GENMASK(5, 4),
+			.fs_avl = {
+				[0] = {
+					.num = ST_GYRO_FS_AVL_245DPS,
+					.value = 0x00,
+					.gain = IIO_DEGREE_TO_RAD(8750),
+				},
+				[1] = {
+					.num = ST_GYRO_FS_AVL_500DPS,
+					.value = 0x01,
+					.gain = IIO_DEGREE_TO_RAD(17500),
+				},
+				[2] = {
+					.num = ST_GYRO_FS_AVL_2000DPS,
+					.value = 0x02,
+					.gain = IIO_DEGREE_TO_RAD(70000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = BIT(7),
+		},
+		.drdy_irq = {
+			.int2 = {
+				.addr = 0x22,
+				.mask = BIT(3),
+			},
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.sim = {
 			.addr = 0x23,
 			.value = BIT(0),
 		},

[PATCH 5.5 27/56] driver core: Fix test_async_driver_probe if NUMA is disabled

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

commit 264d25275a46fce5da501874fa48a2ae5ec571c8 upstream.

Since commit 57ea974fb871 ("driver core: Rewrite test_async_driver_probe
to cover serialization and NUMA affinity"), running the test with NUMA
disabled results in warning messages similar to the following.

test_async_driver test_async_driver.12: NUMA node mismatch -1 != 0

If CONFIG_NUMA=n, dev_to_node(dev) returns -1, and numa_node_id()
returns 0. Both are widely used, so it appears risky to change return
values. Augment the check with IS_ENABLED(CONFIG_NUMA) instead
to fix the problem.

Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20191127202453.28087-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/test/test_async_driver_probe.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/base/test/test_async_driver_probe.c
+++ b/drivers/base/test/test_async_driver_probe.c
@@ -44,7 +44,8 @@ static int test_probe(struct platform_de
 	 * performing an async init on that node.
 	 */
 	if (dev->driver->probe_type == PROBE_PREFER_ASYNCHRONOUS) {
-		if (dev_to_node(dev) != numa_node_id()) {
+		if (IS_ENABLED(CONFIG_NUMA) &&
+		    dev_to_node(dev) != numa_node_id()) {
 			dev_warn(dev, "NUMA node mismatch %d != %d\n",
 				 dev_to_node(dev), numa_node_id());
 			atomic_inc(&warnings);

[PATCH 5.5 28/56] crypto: chelsio - fix writing tfm flags to wrong place

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit bd56cea012fc2d6381e8cd3209510ce09f9de8c9 upstream.

The chelsio crypto driver is casting 'struct crypto_aead' directly to
'struct crypto_tfm', which is incorrect because the crypto_tfm isn't the
first field of 'struct crypto_aead'.  Consequently, the calls to
crypto_tfm_set_flags() are modifying some other field in the struct.

Also, the driver is setting CRYPTO_TFM_RES_BAD_KEY_LEN in
->setauthsize(), not just in ->setkey().  This is incorrect since this
flag is for bad key lengths, not for bad authentication tag lengths.

Fix these bugs by removing the broken crypto_tfm_set_flags() calls from
->setauthsize() and by fixing them in ->setkey().

Fixes: 324429d74127 ("chcr: Support for Chelsio's Crypto Hardware")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/chelsio/chcr_algo.c |   16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -3195,9 +3195,6 @@ static int chcr_gcm_setauthsize(struct c
 		aeadctx->mayverify = VERIFY_SW;
 		break;
 	default:
-
-		  crypto_tfm_set_flags((struct crypto_tfm *) tfm,
-			CRYPTO_TFM_RES_BAD_KEY_LEN);
 		return -EINVAL;
 	}
 	return crypto_aead_setauthsize(aeadctx->sw_cipher, authsize);
@@ -3222,8 +3219,6 @@ static int chcr_4106_4309_setauthsize(st
 		aeadctx->mayverify = VERIFY_HW;
 		break;
 	default:
-		crypto_tfm_set_flags((struct crypto_tfm *)tfm,
-				     CRYPTO_TFM_RES_BAD_KEY_LEN);
 		return -EINVAL;
 	}
 	return crypto_aead_setauthsize(aeadctx->sw_cipher, authsize);
@@ -3264,8 +3259,6 @@ static int chcr_ccm_setauthsize(struct c
 		aeadctx->mayverify = VERIFY_HW;
 		break;
 	default:
-		crypto_tfm_set_flags((struct crypto_tfm *)tfm,
-				     CRYPTO_TFM_RES_BAD_KEY_LEN);
 		return -EINVAL;
 	}
 	return crypto_aead_setauthsize(aeadctx->sw_cipher, authsize);
@@ -3290,8 +3283,7 @@ static int chcr_ccm_common_setkey(struct
 		ck_size = CHCR_KEYCTX_CIPHER_KEY_SIZE_256;
 		mk_size = CHCR_KEYCTX_MAC_KEY_SIZE_256;
 	} else {
-		crypto_tfm_set_flags((struct crypto_tfm *)aead,
-				     CRYPTO_TFM_RES_BAD_KEY_LEN);
+		crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN);
 		aeadctx->enckey_len = 0;
 		return	-EINVAL;
 	}
@@ -3329,8 +3321,7 @@ static int chcr_aead_rfc4309_setkey(stru
 	int error;
 
 	if (keylen < 3) {
-		crypto_tfm_set_flags((struct crypto_tfm *)aead,
-				     CRYPTO_TFM_RES_BAD_KEY_LEN);
+		crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN);
 		aeadctx->enckey_len = 0;
 		return	-EINVAL;
 	}
@@ -3380,8 +3371,7 @@ static int chcr_gcm_setkey(struct crypto
 	} else if (keylen == AES_KEYSIZE_256) {
 		ck_size = CHCR_KEYCTX_CIPHER_KEY_SIZE_256;
 	} else {
-		crypto_tfm_set_flags((struct crypto_tfm *)aead,
-				     CRYPTO_TFM_RES_BAD_KEY_LEN);
+		crypto_aead_set_flags(aead, CRYPTO_TFM_RES_BAD_KEY_LEN);
 		pr_err("GCM: Invalid key length %d\n", keylen);
 		ret = -EINVAL;
 		goto out;

[PATCH 5.5 29/56] CIFS: Fix task struct use-after-free on reconnect

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

commit f1f27ad74557e39f67a8331a808b860f89254f2d upstream.

The task which created the MID may be gone by the time cifsd attempts to
call the callbacks on MIDs from cifs_reconnect().

This leads to a use-after-free of the task struct in cifs_wake_up_task:

 ==================================================================
 BUG: KASAN: use-after-free in __lock_acquire+0x31a0/0x3270
 Read of size 8 at addr ffff8880103e3a68 by task cifsd/630

 CPU: 0 PID: 630 Comm: cifsd Not tainted 5.5.0-rc6+ #119
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x8e/0xcb
  print_address_description.constprop.5+0x1d3/0x3c0
  ? __lock_acquire+0x31a0/0x3270
  __kasan_report+0x152/0x1aa
  ? __lock_acquire+0x31a0/0x3270
  ? __lock_acquire+0x31a0/0x3270
  kasan_report+0xe/0x20
  __lock_acquire+0x31a0/0x3270
  ? __wake_up_common+0x1dc/0x630
  ? _raw_spin_unlock_irqrestore+0x4c/0x60
  ? mark_held_locks+0xf0/0xf0
  ? _raw_spin_unlock_irqrestore+0x39/0x60
  ? __wake_up_common_lock+0xd5/0x130
  ? __wake_up_common+0x630/0x630
  lock_acquire+0x13f/0x330
  ? try_to_wake_up+0xa3/0x19e0
  _raw_spin_lock_irqsave+0x38/0x50
  ? try_to_wake_up+0xa3/0x19e0
  try_to_wake_up+0xa3/0x19e0
  ? cifs_compound_callback+0x178/0x210
  ? set_cpus_allowed_ptr+0x10/0x10
  cifs_reconnect+0xa1c/0x15d0
  ? generic_ip_connect+0x1860/0x1860
  ? rwlock_bug.part.0+0x90/0x90
  cifs_readv_from_socket+0x479/0x690
  cifs_read_from_socket+0x9d/0xe0
  ? cifs_readv_from_socket+0x690/0x690
  ? mempool_resize+0x690/0x690
  ? rwlock_bug.part.0+0x90/0x90
  ? memset+0x1f/0x40
  ? allocate_buffers+0xff/0x340
  cifs_demultiplex_thread+0x388/0x2a50
  ? cifs_handle_standard+0x610/0x610
  ? rcu_read_lock_held_common+0x120/0x120
  ? mark_lock+0x11b/0xc00
  ? __lock_acquire+0x14ed/0x3270
  ? __kthread_parkme+0x78/0x100
  ? lockdep_hardirqs_on+0x3e8/0x560
  ? lock_downgrade+0x6a0/0x6a0
  ? lockdep_hardirqs_on+0x3e8/0x560
  ? _raw_spin_unlock_irqrestore+0x39/0x60
  ? cifs_handle_standard+0x610/0x610
  kthread+0x2bb/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x3a/0x50

 Allocated by task 649:
  save_stack+0x19/0x70
  __kasan_kmalloc.constprop.5+0xa6/0xf0
  kmem_cache_alloc+0x107/0x320
  copy_process+0x17bc/0x5370
  _do_fork+0x103/0xbf0
  __x64_sys_clone+0x168/0x1e0
  do_syscall_64+0x9b/0xec0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 Freed by task 0:
  save_stack+0x19/0x70
  __kasan_slab_free+0x11d/0x160
  kmem_cache_free+0xb5/0x3d0
  rcu_core+0x52f/0x1230
  __do_softirq+0x24d/0x962

 The buggy address belongs to the object at ffff8880103e32c0
  which belongs to the cache task_struct of size 6016
 The buggy address is located 1960 bytes inside of
  6016-byte region [ffff8880103e32c0, ffff8880103e4a40)
 The buggy address belongs to the page:
 page:ffffea000040f800 refcount:1 mapcount:0 mapping:ffff8880108da5c0
 index:0xffff8880103e4c00 compound_mapcount: 0
 raw: 4000000000010200 ffffea00001f2208 ffffea00001e3408 ffff8880108da5c0
 raw: ffff8880103e4c00 0000000000050003 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff8880103e3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8880103e3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff8880103e3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                           ^
  ffff8880103e3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8880103e3b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

This can be reliably reproduced by adding the below delay to
cifs_reconnect(), running find(1) on the mount, restarting the samba
server while find is running, and killing find during the delay:

  	spin_unlock(&GlobalMid_Lock);
  	mutex_unlock(&server->srv_mutex);

 +	msleep(10000);
 +
  	cifs_dbg(FYI, "%s: issuing mid callbacks\n", __func__);
  	list_for_each_safe(tmp, tmp2, &retry_list) {
  		mid_entry = list_entry(tmp, struct mid_q_entry, qhead);

Fix this by holding a reference to the task struct until the MID is
freed.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifsglob.h      |    1 +
 fs/cifs/smb2transport.c |    2 ++
 fs/cifs/transport.c     |    3 +++
 3 files changed, 6 insertions(+)

--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1588,6 +1588,7 @@ struct mid_q_entry {
 	mid_callback_t *callback; /* call completion callback */
 	mid_handle_t *handle; /* call handle mid callback */
 	void *callback_data;	  /* general purpose pointer for callback */
+	struct task_struct *creator;
 	void *resp_buf;		/* pointer to received SMB header */
 	unsigned int resp_buf_size;
 	int mid_state;	/* wish this were enum but can not pass to wait_event */
--- a/fs/cifs/smb2transport.c
+++ b/fs/cifs/smb2transport.c
@@ -685,6 +685,8 @@ smb2_mid_entry_alloc(const struct smb2_s
 	 * The default is for the mid to be synchronous, so the
 	 * default callback just wakes up the current task.
 	 */
+	get_task_struct(current);
+	temp->creator = current;
 	temp->callback = cifs_wake_up_task;
 	temp->callback_data = current;
 
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -76,6 +76,8 @@ AllocMidQEntry(const struct smb_hdr *smb
 	 * The default is for the mid to be synchronous, so the
 	 * default callback just wakes up the current task.
 	 */
+	get_task_struct(current);
+	temp->creator = current;
 	temp->callback = cifs_wake_up_task;
 	temp->callback_data = current;
 
@@ -158,6 +160,7 @@ static void _cifs_mid_q_entry_release(st
 		}
 	}
 #endif
+	put_task_struct(midEntry->creator);
 
 	mempool_free(midEntry, cifs_mid_poolp);
 }

[PATCH 5.5 30/56] cifs: set correct max-buffer-size for smb2_ioctl_init()

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

commit 731b82bb1750a906c1e7f070aedf5505995ebea7 upstream.

Fix two places where we need to adjust down the max response size for
ioctl when it is used together with compounding.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2ops.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1523,7 +1523,9 @@ smb2_ioctl_query_info(const unsigned int
 					     COMPOUND_FID, COMPOUND_FID,
 					     qi.info_type, true, buffer,
 					     qi.output_buffer_length,
-					     CIFSMaxBufSize);
+					     CIFSMaxBufSize -
+					     MAX_SMB2_CREATE_RESPONSE_SIZE -
+					     MAX_SMB2_CLOSE_RESPONSE_SIZE);
 		}
 	} else if (qi.flags == PASSTHRU_SET_INFO) {
 		/* Can eventually relax perm check since server enforces too */
@@ -2697,7 +2699,10 @@ smb2_query_symlink(const unsigned int xi
 
 	rc = SMB2_ioctl_init(tcon, &rqst[1], fid.persistent_fid,
 			     fid.volatile_fid, FSCTL_GET_REPARSE_POINT,
-			     true /* is_fctl */, NULL, 0, CIFSMaxBufSize);
+			     true /* is_fctl */, NULL, 0,
+			     CIFSMaxBufSize -
+			     MAX_SMB2_CREATE_RESPONSE_SIZE -
+			     MAX_SMB2_CLOSE_RESPONSE_SIZE);
 	if (rc)
 		goto querty_exit;
 

[PATCH 5.5 31/56] cifs: Fix memory allocation in __smb2_handle_cancelled_cmd()

[Greg Kroah-Hartman]

From: Paulo Alcantara (SUSE) <pc@cjr.nz>

commit 0a5a98863c9debc02387b3d23c46d187756f5e2b upstream.

__smb2_handle_cancelled_cmd() is called under a spin lock held in
cifs_mid_q_entry_release(), so make its memory allocation GFP_ATOMIC.

This issue was observed when running xfstests generic/028:

[ 1722.589204] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72064 cmd: 5
[ 1722.590687] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72065 cmd: 17
[ 1722.593529] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72066 cmd: 6
[ 1723.039014] BUG: sleeping function called from invalid context at mm/slab.h:565
[ 1723.040710] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 30877, name: cifsd
[ 1723.045098] CPU: 3 PID: 30877 Comm: cifsd Not tainted 5.5.0-rc4+ #313
[ 1723.046256] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 1723.048221] Call Trace:
[ 1723.048689]  dump_stack+0x97/0xe0
[ 1723.049268]  ___might_sleep.cold+0xd1/0xe1
[ 1723.050069]  kmem_cache_alloc_trace+0x204/0x2b0
[ 1723.051051]  __smb2_handle_cancelled_cmd+0x40/0x140 [cifs]
[ 1723.052137]  smb2_handle_cancelled_mid+0xf6/0x120 [cifs]
[ 1723.053247]  cifs_mid_q_entry_release+0x44d/0x630 [cifs]
[ 1723.054351]  ? cifs_reconnect+0x26a/0x1620 [cifs]
[ 1723.055325]  cifs_demultiplex_thread+0xad4/0x14a0 [cifs]
[ 1723.056458]  ? cifs_handle_standard+0x2c0/0x2c0 [cifs]
[ 1723.057365]  ? kvm_sched_clock_read+0x14/0x30
[ 1723.058197]  ? sched_clock+0x5/0x10
[ 1723.058838]  ? sched_clock_cpu+0x18/0x110
[ 1723.059629]  ? lockdep_hardirqs_on+0x17d/0x250
[ 1723.060456]  kthread+0x1ab/0x200
[ 1723.061149]  ? cifs_handle_standard+0x2c0/0x2c0 [cifs]
[ 1723.062078]  ? kthread_create_on_node+0xd0/0xd0
[ 1723.062897]  ret_from_fork+0x3a/0x50

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Fixes: 9150c3adbf24 ("CIFS: Close open handle after interrupted close")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2misc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -743,7 +743,7 @@ __smb2_handle_cancelled_cmd(struct cifs_
 {
 	struct close_cancelled_open *cancelled;
 
-	cancelled = kzalloc(sizeof(*cancelled), GFP_KERNEL);
+	cancelled = kzalloc(sizeof(*cancelled), GFP_ATOMIC);
 	if (!cancelled)
 		return -ENOMEM;
 

[PATCH 5.5 32/56] ath9k: fix storage endpoint lookup

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Cc: stable <stable@vger.kernel.org>     # 2.6.39
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1216,7 +1216,7 @@ err_fw:
 static int send_eject_command(struct usb_interface *interface)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *iface_desc = &interface->altsetting[0];
+	struct usb_host_interface *iface_desc = interface->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

[PATCH 5.5 33/56] brcmfmac: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3428fbcd6e6c0850b1a8b2a12082b7b2aabb3da3 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable <stable@vger.kernel.org>     # 3.4
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1348,7 +1348,7 @@ brcmf_usb_probe(struct usb_interface *in
 		goto fail;
 	}
 
-	desc = &intf->altsetting[0].desc;
+	desc = &intf->cur_altsetting->desc;
 	if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
 	    (desc->bInterfaceSubClass != 2) ||
 	    (desc->bInterfaceProtocol != 0xff)) {
@@ -1361,7 +1361,7 @@ brcmf_usb_probe(struct usb_interface *in
 
 	num_of_eps = desc->bNumEndpoints;
 	for (ep = 0; ep < num_of_eps; ep++) {
-		endpoint = &intf->altsetting[0].endpoint[ep].desc;
+		endpoint = &intf->cur_altsetting->endpoint[ep].desc;
 		endpoint_num = usb_endpoint_num(endpoint);
 		if (!usb_endpoint_xfer_bulk(endpoint))
 			continue;

[PATCH 5.5 34/56] rtl8xxxu: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 39a4281c312f2d226c710bc656ce380c621a2b16 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable <stable@vger.kernel.org>     # 4.4
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -6384,7 +6384,7 @@ static int rtl8xxxu_parse_usb(struct rtl
 	u8 dir, xtype, num;
 	int ret = 0;
 
-	host_interface = &interface->altsetting[0];
+	host_interface = interface->cur_altsetting;
 	interface_desc = &host_interface->desc;
 	endpoints = interface_desc->bNumEndpoints;
 

[PATCH 5.5 35/56] zd1211rw: fix storage endpoint lookup

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 2d68bb2687abb747558b933e80845ff31570a49c upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device")
Cc: stable <stable@vger.kernel.org>     # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/zydas/zd1211rw/zd_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
@@ -1263,7 +1263,7 @@ static void print_id(struct usb_device *
 static int eject_installer(struct usb_interface *intf)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *iface_desc = &intf->altsetting[0];
+	struct usb_host_interface *iface_desc = intf->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

[PATCH 5.5 36/56] mvneta driver disallow XDP program on hardware buffer management

[Greg Kroah-Hartman]

From: Sven Auhagen <sven.auhagen@voleatech.de>

[ Upstream commit 79572c98c554dcdb080bca547c871a51716dcdf8 ]

Recently XDP Support was added to the mvneta driver
for software buffer management only.
It is still possible to attach an XDP program if
hardware buffer management is used.
It is not doing anything at that point.

The patch disallows attaching XDP programs to mvneta
if hardware buffer management is used.

I am sorry about that. It is my first submission and I am having
some troubles with the format of my emails.

v4 -> v5:
- Remove extra tabs

v3 -> v4:
- Please ignore v3 I accidentally submitted
  my other patch with git-send-mail and v4 is correct

v2 -> v3:
- My mailserver corrupted the patch
  resubmission with git-send-email

v1 -> v2:
- Fixing the patches indentation

Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4226,6 +4226,12 @@ static int mvneta_xdp_setup(struct net_d
 		return -EOPNOTSUPP;
 	}
 
+	if (pp->bm_priv) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Hardware Buffer Management not supported on XDP");
+		return -EOPNOTSUPP;
+	}
+
 	need_update = !!pp->xdp_prog != !!prog;
 	if (running && need_update)
 		mvneta_stop(dev);

[PATCH 5.5 37/56] net_sched: ematch: reject invalid TCF_EM_SIMPLE

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 55cd9f67f1e45de8517cdaab985fb8e56c0bc1d8 ]

It is possible for malicious userspace to set TCF_EM_SIMPLE bit
even for matches that should not have this bit set.

This can fool two places using tcf_em_is_simple()

1) tcf_em_tree_destroy() -> memory leak of em->data
   if ops->destroy() is NULL

2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes
   of a kernel pointer.

BUG: memory leak
unreferenced object 0xffff888121850a40 (size 32):
  comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s)
  hex dump (first 32 bytes):
    00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline]
    [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline]
    [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671
    [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127
    [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline]
    [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32
    [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline]
    [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline]
    [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300
    [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline]
    [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219
    [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104
    [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415
    [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/ematch.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/sched/ematch.c
+++ b/net/sched/ematch.c
@@ -238,6 +238,9 @@ static int tcf_em_validate(struct tcf_pr
 			goto errout;
 
 		if (em->ops->change) {
+			err = -EINVAL;
+			if (em_hdr->flags & TCF_EM_SIMPLE)
+				goto errout;
 			err = em->ops->change(net, data, data_len, em);
 			if (err < 0)
 				goto errout;

[PATCH 5.5 38/56] net_sched: fix ops->bind_class() implementations

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 2e24cd755552350b94a7617617c6877b8cbcb701 ]

The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().

In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.

Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.

Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/pkt_cls.h     |   33 +++++++++++++++++++--------------
 include/net/sch_generic.h |    3 ++-
 net/sched/cls_basic.c     |   11 ++++++++---
 net/sched/cls_bpf.c       |   11 ++++++++---
 net/sched/cls_flower.c    |   11 ++++++++---
 net/sched/cls_fw.c        |   11 ++++++++---
 net/sched/cls_matchall.c  |   11 ++++++++---
 net/sched/cls_route.c     |   11 ++++++++---
 net/sched/cls_rsvp.h      |   11 ++++++++---
 net/sched/cls_tcindex.c   |   11 ++++++++---
 net/sched/cls_u32.c       |   11 ++++++++---
 net/sched/sch_api.c       |    6 ++++--
 12 files changed, 97 insertions(+), 44 deletions(-)

--- a/include/net/pkt_cls.h
+++ b/include/net/pkt_cls.h
@@ -141,31 +141,38 @@ __cls_set_class(unsigned long *clp, unsi
 	return xchg(clp, cl);
 }
 
-static inline unsigned long
-cls_set_class(struct Qdisc *q, unsigned long *clp, unsigned long cl)
+static inline void
+__tcf_bind_filter(struct Qdisc *q, struct tcf_result *r, unsigned long base)
 {
-	unsigned long old_cl;
+	unsigned long cl;
 
-	sch_tree_lock(q);
-	old_cl = __cls_set_class(clp, cl);
-	sch_tree_unlock(q);
-	return old_cl;
+	cl = q->ops->cl_ops->bind_tcf(q, base, r->classid);
+	cl = __cls_set_class(&r->class, cl);
+	if (cl)
+		q->ops->cl_ops->unbind_tcf(q, cl);
 }
 
 static inline void
 tcf_bind_filter(struct tcf_proto *tp, struct tcf_result *r, unsigned long base)
 {
 	struct Qdisc *q = tp->chain->block->q;
-	unsigned long cl;
 
 	/* Check q as it is not set for shared blocks. In that case,
 	 * setting class is not supported.
 	 */
 	if (!q)
 		return;
-	cl = q->ops->cl_ops->bind_tcf(q, base, r->classid);
-	cl = cls_set_class(q, &r->class, cl);
-	if (cl)
+	sch_tree_lock(q);
+	__tcf_bind_filter(q, r, base);
+	sch_tree_unlock(q);
+}
+
+static inline void
+__tcf_unbind_filter(struct Qdisc *q, struct tcf_result *r)
+{
+	unsigned long cl;
+
+	if ((cl = __cls_set_class(&r->class, 0)) != 0)
 		q->ops->cl_ops->unbind_tcf(q, cl);
 }
 
@@ -173,12 +180,10 @@ static inline void
 tcf_unbind_filter(struct tcf_proto *tp, struct tcf_result *r)
 {
 	struct Qdisc *q = tp->chain->block->q;
-	unsigned long cl;
 
 	if (!q)
 		return;
-	if ((cl = __cls_set_class(&r->class, 0)) != 0)
-		q->ops->cl_ops->unbind_tcf(q, cl);
+	__tcf_unbind_filter(q, r);
 }
 
 struct tcf_exts {
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -318,7 +318,8 @@ struct tcf_proto_ops {
 					  void *type_data);
 	void			(*hw_del)(struct tcf_proto *tp,
 					  void *type_data);
-	void			(*bind_class)(void *, u32, unsigned long);
+	void			(*bind_class)(void *, u32, unsigned long,
+					      void *, unsigned long);
 	void *			(*tmplt_create)(struct net *net,
 						struct tcf_chain *chain,
 						struct nlattr **tca,
--- a/net/sched/cls_basic.c
+++ b/net/sched/cls_basic.c
@@ -263,12 +263,17 @@ skip:
 	}
 }
 
-static void basic_bind_class(void *fh, u32 classid, unsigned long cl)
+static void basic_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			     unsigned long base)
 {
 	struct basic_filter *f = fh;
 
-	if (f && f->res.classid == classid)
-		f->res.class = cl;
+	if (f && f->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &f->res, base);
+		else
+			__tcf_unbind_filter(q, &f->res);
+	}
 }
 
 static int basic_dump(struct net *net, struct tcf_proto *tp, void *fh,
--- a/net/sched/cls_bpf.c
+++ b/net/sched/cls_bpf.c
@@ -631,12 +631,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void cls_bpf_bind_class(void *fh, u32 classid, unsigned long cl)
+static void cls_bpf_bind_class(void *fh, u32 classid, unsigned long cl,
+			       void *q, unsigned long base)
 {
 	struct cls_bpf_prog *prog = fh;
 
-	if (prog && prog->res.classid == classid)
-		prog->res.class = cl;
+	if (prog && prog->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &prog->res, base);
+		else
+			__tcf_unbind_filter(q, &prog->res);
+	}
 }
 
 static void cls_bpf_walk(struct tcf_proto *tp, struct tcf_walker *arg,
--- a/net/sched/cls_flower.c
+++ b/net/sched/cls_flower.c
@@ -2765,12 +2765,17 @@ nla_put_failure:
 	return -EMSGSIZE;
 }
 
-static void fl_bind_class(void *fh, u32 classid, unsigned long cl)
+static void fl_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			  unsigned long base)
 {
 	struct cls_fl_filter *f = fh;
 
-	if (f && f->res.classid == classid)
-		f->res.class = cl;
+	if (f && f->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &f->res, base);
+		else
+			__tcf_unbind_filter(q, &f->res);
+	}
 }
 
 static bool fl_delete_empty(struct tcf_proto *tp)
--- a/net/sched/cls_fw.c
+++ b/net/sched/cls_fw.c
@@ -419,12 +419,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void fw_bind_class(void *fh, u32 classid, unsigned long cl)
+static void fw_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			  unsigned long base)
 {
 	struct fw_filter *f = fh;
 
-	if (f && f->res.classid == classid)
-		f->res.class = cl;
+	if (f && f->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &f->res, base);
+		else
+			__tcf_unbind_filter(q, &f->res);
+	}
 }
 
 static struct tcf_proto_ops cls_fw_ops __read_mostly = {
--- a/net/sched/cls_matchall.c
+++ b/net/sched/cls_matchall.c
@@ -393,12 +393,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void mall_bind_class(void *fh, u32 classid, unsigned long cl)
+static void mall_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			    unsigned long base)
 {
 	struct cls_mall_head *head = fh;
 
-	if (head && head->res.classid == classid)
-		head->res.class = cl;
+	if (head && head->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &head->res, base);
+		else
+			__tcf_unbind_filter(q, &head->res);
+	}
 }
 
 static struct tcf_proto_ops cls_mall_ops __read_mostly = {
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -641,12 +641,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void route4_bind_class(void *fh, u32 classid, unsigned long cl)
+static void route4_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			      unsigned long base)
 {
 	struct route4_filter *f = fh;
 
-	if (f && f->res.classid == classid)
-		f->res.class = cl;
+	if (f && f->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &f->res, base);
+		else
+			__tcf_unbind_filter(q, &f->res);
+	}
 }
 
 static struct tcf_proto_ops cls_route4_ops __read_mostly = {
--- a/net/sched/cls_rsvp.h
+++ b/net/sched/cls_rsvp.h
@@ -738,12 +738,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void rsvp_bind_class(void *fh, u32 classid, unsigned long cl)
+static void rsvp_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			    unsigned long base)
 {
 	struct rsvp_filter *f = fh;
 
-	if (f && f->res.classid == classid)
-		f->res.class = cl;
+	if (f && f->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &f->res, base);
+		else
+			__tcf_unbind_filter(q, &f->res);
+	}
 }
 
 static struct tcf_proto_ops RSVP_OPS __read_mostly = {
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -654,12 +654,17 @@ nla_put_failure:
 	return -1;
 }
 
-static void tcindex_bind_class(void *fh, u32 classid, unsigned long cl)
+static void tcindex_bind_class(void *fh, u32 classid, unsigned long cl,
+			       void *q, unsigned long base)
 {
 	struct tcindex_filter_result *r = fh;
 
-	if (r && r->res.classid == classid)
-		r->res.class = cl;
+	if (r && r->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &r->res, base);
+		else
+			__tcf_unbind_filter(q, &r->res);
+	}
 }
 
 static struct tcf_proto_ops cls_tcindex_ops __read_mostly = {
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -1255,12 +1255,17 @@ static int u32_reoffload(struct tcf_prot
 	return 0;
 }
 
-static void u32_bind_class(void *fh, u32 classid, unsigned long cl)
+static void u32_bind_class(void *fh, u32 classid, unsigned long cl, void *q,
+			   unsigned long base)
 {
 	struct tc_u_knode *n = fh;
 
-	if (n && n->res.classid == classid)
-		n->res.class = cl;
+	if (n && n->res.classid == classid) {
+		if (cl)
+			__tcf_bind_filter(q, &n->res, base);
+		else
+			__tcf_unbind_filter(q, &n->res);
+	}
 }
 
 static int u32_dump(struct net *net, struct tcf_proto *tp, void *fh,
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1891,8 +1891,9 @@ static int tclass_del_notify(struct net
 
 struct tcf_bind_args {
 	struct tcf_walker w;
-	u32 classid;
+	unsigned long base;
 	unsigned long cl;
+	u32 classid;
 };
 
 static int tcf_node_bind(struct tcf_proto *tp, void *n, struct tcf_walker *arg)
@@ -1903,7 +1904,7 @@ static int tcf_node_bind(struct tcf_prot
 		struct Qdisc *q = tcf_block_q(tp->chain->block);
 
 		sch_tree_lock(q);
-		tp->ops->bind_class(n, a->classid, a->cl);
+		tp->ops->bind_class(n, a->classid, a->cl, q, a->base);
 		sch_tree_unlock(q);
 	}
 	return 0;
@@ -1936,6 +1937,7 @@ static void tc_bind_tclass(struct Qdisc
 
 			arg.w.fn = tcf_node_bind;
 			arg.classid = clid;
+			arg.base = cl;
 			arg.cl = new_cl;
 			tp->ops->walk(tp, &arg.w, true);
 		}

[PATCH 5.5 39/56] net_sched: walk through all child classes in tc_bind_tclass()

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 760d228e322e99cdf6d81b4b60a268b8f13cf67a ]

In a complex TC class hierarchy like this:

tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit         \
  avpkt 1000 cell 8
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit  \
  rate 6Mbit weight 0.6Mbit prio 8 allot 1514 cell 8 maxburst 20      \
  avpkt 1000 bounded

tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
  sport 80 0xffff flowid 1:3
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
  sport 25 0xffff flowid 1:4

tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit  \
  rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit  \
  rate 3Mbit weight 0.3Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000

where filters are installed on qdisc 1:0, so we can't merely
search from class 1:1 when creating class 1:3 and class 1:4. We have
to walk through all the child classes of the direct parent qdisc.
Otherwise we would miss filters those need reverse binding.

Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_api.c |   41 ++++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1910,22 +1910,24 @@ static int tcf_node_bind(struct tcf_prot
 	return 0;
 }
 
-static void tc_bind_tclass(struct Qdisc *q, u32 portid, u32 clid,
-			   unsigned long new_cl)
+struct tc_bind_class_args {
+	struct qdisc_walker w;
+	unsigned long new_cl;
+	u32 portid;
+	u32 clid;
+};
+
+static int tc_bind_class_walker(struct Qdisc *q, unsigned long cl,
+				struct qdisc_walker *w)
 {
+	struct tc_bind_class_args *a = (struct tc_bind_class_args *)w;
 	const struct Qdisc_class_ops *cops = q->ops->cl_ops;
 	struct tcf_block *block;
 	struct tcf_chain *chain;
-	unsigned long cl;
 
-	cl = cops->find(q, portid);
-	if (!cl)
-		return;
-	if (!cops->tcf_block)
-		return;
 	block = cops->tcf_block(q, cl, NULL);
 	if (!block)
-		return;
+		return 0;
 	for (chain = tcf_get_next_chain(block, NULL);
 	     chain;
 	     chain = tcf_get_next_chain(block, chain)) {
@@ -1936,12 +1938,29 @@ static void tc_bind_tclass(struct Qdisc
 			struct tcf_bind_args arg = {};
 
 			arg.w.fn = tcf_node_bind;
-			arg.classid = clid;
+			arg.classid = a->clid;
 			arg.base = cl;
-			arg.cl = new_cl;
+			arg.cl = a->new_cl;
 			tp->ops->walk(tp, &arg.w, true);
 		}
 	}
+
+	return 0;
+}
+
+static void tc_bind_tclass(struct Qdisc *q, u32 portid, u32 clid,
+			   unsigned long new_cl)
+{
+	const struct Qdisc_class_ops *cops = q->ops->cl_ops;
+	struct tc_bind_class_args args = {};
+
+	if (!cops->tcf_block)
+		return;
+	args.portid = portid;
+	args.clid = clid;
+	args.new_cl = new_cl;
+	args.w.fn = tc_bind_class_walker;
+	q->ops->cl_ops->walk(q, &args.w);
 }
 
 #else

[PATCH 5.5 40/56] net: socionext: fix possible user-after-free in netsec_process_rx

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit b5e82e3c89c78ee0407ea8e8087af5519b6c7bae ]

Fix possible use-after-free in in netsec_process_rx that can occurs if
the first packet is sent to the normal networking stack and the
following one is dropped by the bpf program attached to the xdp hook.
Fix the issue defining the skb pointer in the 'budget' loop

Fixes: ba2b232108d3c ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/socionext/netsec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -929,7 +929,6 @@ static int netsec_process_rx(struct nets
 	struct netsec_rx_pkt_info rx_info;
 	enum dma_data_direction dma_dir;
 	struct bpf_prog *xdp_prog;
-	struct sk_buff *skb = NULL;
 	u16 xdp_xmit = 0;
 	u32 xdp_act = 0;
 	int done = 0;
@@ -943,6 +942,7 @@ static int netsec_process_rx(struct nets
 		struct netsec_de *de = dring->vaddr + (DESC_SZ * idx);
 		struct netsec_desc *desc = &dring->desc[idx];
 		struct page *page = virt_to_page(desc->addr);
+		struct sk_buff *skb = NULL;
 		u32 xdp_result = XDP_PASS;
 		u16 pkt_len, desc_len;
 		dma_addr_t dma_handle;

[PATCH 5.5 41/56] net: socionext: fix xdp_result initialization in netsec_process_rx

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 02758cb6dac31a2b4bd9e535cffbe718acd46404 ]

Fix xdp_result initialization in netsec_process_rx in order to not
increase rx counters if there is no bpf program attached to the xdp hook
and napi_gro_receive returns GRO_DROP

Fixes: ba2b232108d3c ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/socionext/netsec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -942,8 +942,8 @@ static int netsec_process_rx(struct nets
 		struct netsec_de *de = dring->vaddr + (DESC_SZ * idx);
 		struct netsec_desc *desc = &dring->desc[idx];
 		struct page *page = virt_to_page(desc->addr);
+		u32 xdp_result = NETSEC_XDP_PASS;
 		struct sk_buff *skb = NULL;
-		u32 xdp_result = XDP_PASS;
 		u16 pkt_len, desc_len;
 		dma_addr_t dma_handle;
 		struct xdp_buff xdp;

[PATCH 5.5 42/56] udp: segment looped gso packets correctly

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit 6cd021a58c18a1731f7e47f83e172c0c302d65e5 ]

Multicast and broadcast packets can be looped from egress to ingress
pre segmentation with dev_loopback_xmit. That function unconditionally
sets ip_summed to CHECKSUM_UNNECESSARY.

udp_rcv_segment segments gso packets in the udp rx path. Segmentation
usually executes on egress, and does not expect packets of this type.
__udp_gso_segment interprets !CHECKSUM_PARTIAL as CHECKSUM_NONE. But
the offsets are not correct for gso_make_checksum.

UDP GSO packets are of type CHECKSUM_PARTIAL, with their uh->check set
to the correct pseudo header checksum. Reset ip_summed to this type.
(CHECKSUM_PARTIAL is allowed on ingress, see comments in skbuff.h)

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/udp.h |    3 +++
 1 file changed, 3 insertions(+)

--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -476,6 +476,9 @@ static inline struct sk_buff *udp_rcv_se
 	if (!inet_get_convert_csum(sk))
 		features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 
+	if (skb->pkt_type == PACKET_LOOPBACK)
+		skb->ip_summed = CHECKSUM_PARTIAL;
+
 	/* the GSO CB lays after the UDP one, no need to save and restore any
 	 * CB fragment
 	 */

[PATCH 5.5 43/56] mlxsw: minimal: Fix an error handling path in mlxsw_m_port_create()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 6dd4b4f3936e17fedea1308bc70e9716f68bf232 ]

An 'alloc_etherdev()' called is not ballanced by a corresponding
'free_netdev()' call in one error handling path.

Slighly reorder the error handling code to catch the missed case.

Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlxsw/minimal.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlxsw/minimal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/minimal.c
@@ -213,8 +213,8 @@ mlxsw_m_port_create(struct mlxsw_m *mlxs
 
 err_register_netdev:
 	mlxsw_m->ports[local_port] = NULL;
-	free_netdev(dev);
 err_dev_addr_get:
+	free_netdev(dev);
 err_alloc_etherdev:
 	mlxsw_core_port_fini(mlxsw_m->core, local_port);
 	return err;

[PATCH 5.5 44/56] net: include struct nhmsg size in nh nlmsg size

[Greg Kroah-Hartman]

From: Stephen Worley <sworley@cumulusnetworks.com>

[ Upstream commit f9e95555757915fc194288862d2978e370fe316b ]

Include the size of struct nhmsg size when calculating
how much of a payload to allocate in a new netlink nexthop
notification message.

Without this, we will fail to fill the skbuff at certain nexthop
group sizes.

You can reproduce the failure with the following iproute2 commands:

ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy

ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19

ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19

ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
ip next del id 1111

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/nexthop.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -321,7 +321,9 @@ static size_t nh_nlmsg_size_single(struc
 
 static size_t nh_nlmsg_size(struct nexthop *nh)
 {
-	size_t sz = nla_total_size(4);    /* NHA_ID */
+	size_t sz = NLMSG_ALIGN(sizeof(struct nhmsg));
+
+	sz += nla_total_size(4); /* NHA_ID */
 
 	if (nh->is_group)
 		sz += nh_nlmsg_size_grp(nh);

[PATCH 5.5 45/56] rxrpc: Fix use-after-free in rxrpc_receive_data()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 122d74fac84204b9a98263636f6f9a3b2e665639 ]

The subpacket scanning loop in rxrpc_receive_data() references the
subpacket count in the private data part of the sk_buff in the loop
termination condition.  However, when the final subpacket is pasted into
the ring buffer, the function is no longer has a ref on the sk_buff and
should not be looking at sp->* any more.  This point is actually marked in
the code when skb is cleared (but sp is not - which is an error).

Fix this by caching sp->nr_subpackets in a local variable and using that
instead.

Also clear 'sp' to catch accesses after that point.

This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets
trashed by the sk_buff getting freed and reused in the meantime.

Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/input.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -413,7 +413,7 @@ static void rxrpc_input_data(struct rxrp
 {
 	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
 	enum rxrpc_call_state state;
-	unsigned int j;
+	unsigned int j, nr_subpackets;
 	rxrpc_serial_t serial = sp->hdr.serial, ack_serial = 0;
 	rxrpc_seq_t seq0 = sp->hdr.seq, hard_ack;
 	bool immediate_ack = false, jumbo_bad = false;
@@ -457,7 +457,8 @@ static void rxrpc_input_data(struct rxrp
 	call->ackr_prev_seq = seq0;
 	hard_ack = READ_ONCE(call->rx_hard_ack);
 
-	if (sp->nr_subpackets > 1) {
+	nr_subpackets = sp->nr_subpackets;
+	if (nr_subpackets > 1) {
 		if (call->nr_jumbo_bad > 3) {
 			ack = RXRPC_ACK_NOSPACE;
 			ack_serial = serial;
@@ -465,11 +466,11 @@ static void rxrpc_input_data(struct rxrp
 		}
 	}
 
-	for (j = 0; j < sp->nr_subpackets; j++) {
+	for (j = 0; j < nr_subpackets; j++) {
 		rxrpc_serial_t serial = sp->hdr.serial + j;
 		rxrpc_seq_t seq = seq0 + j;
 		unsigned int ix = seq & RXRPC_RXTX_BUFF_MASK;
-		bool terminal = (j == sp->nr_subpackets - 1);
+		bool terminal = (j == nr_subpackets - 1);
 		bool last = terminal && (sp->rx_flags & RXRPC_SKB_INCL_LAST);
 		u8 flags, annotation = j;
 
@@ -506,7 +507,7 @@ static void rxrpc_input_data(struct rxrp
 		}
 
 		if (call->rxtx_buffer[ix]) {
-			rxrpc_input_dup_data(call, seq, sp->nr_subpackets > 1,
+			rxrpc_input_dup_data(call, seq, nr_subpackets > 1,
 					     &jumbo_bad);
 			if (ack != RXRPC_ACK_DUPLICATE) {
 				ack = RXRPC_ACK_DUPLICATE;
@@ -564,6 +565,7 @@ static void rxrpc_input_data(struct rxrp
 			 * ring.
 			 */
 			skb = NULL;
+			sp = NULL;
 		}
 
 		if (last) {

[PATCH 5.5 46/56] rsi: fix use-after-free on failed probe and unbind

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit e93cd35101b61e4c79149be2cfc927c4b28dc60c upstream.

Make sure to stop both URBs before returning after failed probe as well
as on disconnect to avoid use-after-free in the completion handler.

Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com
Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint")
Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -292,6 +292,15 @@ out:
 		dev_kfree_skb(rx_cb->rx_skb);
 }
 
+static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
+	struct urb *urb = rx_cb->rx_urb;
+
+	usb_kill_urb(urb);
+}
+
 /**
  * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
  * @adapter: Pointer to the adapter structure.
@@ -823,10 +832,13 @@ static int rsi_probe(struct usb_interfac
 	if (adapter->priv->coex_mode > 1) {
 		status = rsi_rx_urb_submit(adapter, BT_EP);
 		if (status)
-			goto err1;
+			goto err_kill_wlan_urb;
 	}
 
 	return 0;
+
+err_kill_wlan_urb:
+	rsi_rx_urb_kill(adapter, WLAN_EP);
 err1:
 	rsi_deinit_usb_interface(adapter);
 err:
@@ -857,6 +869,10 @@ static void rsi_disconnect(struct usb_in
 		adapter->priv->bt_adapter = NULL;
 	}
 
+	if (adapter->priv->coex_mode > 1)
+		rsi_rx_urb_kill(adapter, BT_EP);
+	rsi_rx_urb_kill(adapter, WLAN_EP);
+
 	rsi_reset_card(adapter);
 	rsi_deinit_usb_interface(adapter);
 	rsi_91x_deinit(adapter);

[PATCH 5.5 47/56] rsi: fix use-after-free on probe errors

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 92aafe77123ab478e5f5095878856ab0424910da upstream.

The driver would fail to stop the command timer in most error paths,
something which specifically could lead to the timer being freed while
still active on I/O errors during probe.

Fix this by making sure that each function starting the timer also stops
it in all relevant error paths.

Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com
Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method")
Cc: stable <stable@vger.kernel.org>     # 4.12
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_hal.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -622,6 +622,7 @@ static int bl_cmd(struct rsi_hw *adapter
 	bl_start_cmd_timer(adapter, timeout);
 	status = bl_write_cmd(adapter, cmd, exp_resp, &regout_val);
 	if (status < 0) {
+		bl_stop_cmd_timer(adapter);
 		rsi_dbg(ERR_ZONE,
 			"%s: Command %s (%0x) writing failed..\n",
 			__func__, str, cmd);
@@ -737,10 +738,9 @@ static int ping_pong_write(struct rsi_hw
 	}
 
 	status = bl_cmd(adapter, cmd_req, cmd_resp, str);
-	if (status) {
-		bl_stop_cmd_timer(adapter);
+	if (status)
 		return status;
-	}
+
 	return 0;
 }
 
@@ -828,10 +828,9 @@ static int auto_fw_upgrade(struct rsi_hw
 
 	status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
 			"EOF_REACHED");
-	if (status) {
-		bl_stop_cmd_timer(adapter);
+	if (status)
 		return status;
-	}
+
 	rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
 	return 0;
 }
@@ -849,6 +848,7 @@ static int rsi_hal_prepare_fwload(struct
 						  &regout_val,
 						  RSI_COMMON_REG_SIZE);
 		if (status < 0) {
+			bl_stop_cmd_timer(adapter);
 			rsi_dbg(ERR_ZONE,
 				"%s: REGOUT read failed\n", __func__);
 			return status;

[PATCH 5.5 48/56] rsi: fix memory leak on failed URB submission

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 47768297481184932844ab01a86752ba31a38861 upstream.

Make sure to free the skb on failed receive-URB submission (e.g. on
disconnect or currently also due to a missing endpoint).

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org>     # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -338,8 +338,10 @@ static int rsi_rx_urb_submit(struct rsi_
 			  rx_cb);
 
 	status = usb_submit_urb(urb, GFP_KERNEL);
-	if (status)
+	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
+		dev_kfree_skb(skb);
+	}
 
 	return status;
 }

[PATCH 5.5 49/56] rsi: fix non-atomic allocation in completion handler

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b9b9f9fea21830f85cf0148cd8dce001ae55ead1 upstream.

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/types.h>
 #include <net/rsi_91x.h>
 #include "rsi_usb.h"
 #include "rsi_hal.h"
@@ -29,7 +30,7 @@ MODULE_PARM_DESC(dev_oper_mode,
 		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
 		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
 
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num);
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
@@ -285,7 +286,7 @@ static void rsi_rx_done_handler(struct u
 	status = 0;
 
 out:
-	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num))
+	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
 	if (status)
@@ -307,7 +308,7 @@ static void rsi_rx_urb_kill(struct rsi_h
  *
  * Return: 0 on success, a negative error code on failure.
  */
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
@@ -337,7 +338,7 @@ static int rsi_rx_urb_submit(struct rsi_
 			  rsi_rx_done_handler,
 			  rx_cb);
 
-	status = usb_submit_urb(urb, GFP_KERNEL);
+	status = usb_submit_urb(urb, mem_flags);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
 		dev_kfree_skb(skb);
@@ -827,12 +828,12 @@ static int rsi_probe(struct usb_interfac
 		rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
 	}
 
-	status = rsi_rx_urb_submit(adapter, WLAN_EP);
+	status = rsi_rx_urb_submit(adapter, WLAN_EP, GFP_KERNEL);
 	if (status)
 		goto err1;
 
 	if (adapter->priv->coex_mode > 1) {
-		status = rsi_rx_urb_submit(adapter, BT_EP);
+		status = rsi_rx_urb_submit(adapter, BT_EP, GFP_KERNEL);
 		if (status)
 			goto err_kill_wlan_urb;
 	}

[PATCH 5.5 50/56] crypto: af_alg - Use bh_lock_sock in sk_destruct

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 37f96694cf73ba116993a9d2d99ad6a75fa7fdb0 upstream.

As af_alg_release_parent may be called from BH context (most notably
due to an async request that only completes after socket closure,
or as reported here because of an RCU-delayed sk_destruct call), we
must use bh_lock_sock instead of lock_sock.

Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c840ac6af3f8 ("crypto: af_alg - Disallow bind/setkey/...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/af_alg.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -134,11 +134,13 @@ void af_alg_release_parent(struct sock *
 	sk = ask->parent;
 	ask = alg_sk(sk);
 
-	lock_sock(sk);
+	local_bh_disable();
+	bh_lock_sock(sk);
 	ask->nokey_refcnt -= nokey;
 	if (!last)
 		last = !--ask->refcnt;
-	release_sock(sk);
+	bh_unlock_sock(sk);
+	local_bh_enable();
 
 	if (last)
 		sock_put(sk);

[PATCH 5.5 51/56] crypto: vmx - reject xts inputs that are too short

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

commit 1372a51b88fa0d5a8ed2803e4975c98da3f08463 upstream.

When the kernel XTS implementation was extended to deal with ciphertext
stealing in commit 8083b1bf8163 ("crypto: xts - add support for ciphertext
stealing"), a check was added to reject inputs that were too short.

However, in the vmx enablement - commit 239668419349 ("crypto: vmx/xts -
use fallback for ciphertext stealing"), that check wasn't added to the
vmx implementation. This disparity leads to errors like the following:

alg: skcipher: p8_aes_xts encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<flush>66.99%@+10, 33.1%@alignmask+1155]"

Return -EINVAL if asked to operate with a cryptlen smaller than the AES
block size. This brings vmx in line with the generic implementation.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206049
Fixes: 239668419349 ("crypto: vmx/xts - use fallback for ciphertext stealing")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[dja: commit message]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/vmx/aes_xts.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/crypto/vmx/aes_xts.c
+++ b/drivers/crypto/vmx/aes_xts.c
@@ -84,6 +84,9 @@ static int p8_aes_xts_crypt(struct skcip
 	u8 tweak[AES_BLOCK_SIZE];
 	int ret;
 
+	if (req->cryptlen < AES_BLOCK_SIZE)
+		return -EINVAL;
+
 	if (!crypto_simd_usable() || (req->cryptlen % XTS_BLOCK_SIZE) != 0) {
 		struct skcipher_request *subreq = skcipher_request_ctx(req);
 

[PATCH 5.5 52/56] crypto: caam - do not reset pointer size from MCFGR register

[Greg Kroah-Hartman]

From: Iuliana Prodan <iuliana.prodan@nxp.com>

commit 7278fa25aa0ebcc0e62c39b12071069df13f7e77 upstream.

In commit 'a1cf573ee95 ("crypto: caam - select DMA address size at runtime")'
CAAM pointer size (caam_ptr_size) is changed from
sizeof(dma_addr_t) to runtime value computed from MCFGR register.
Therefore, do not reset MCFGR[PS].

Fixes: a1cf573ee95 ("crypto: caam - select DMA address size at runtime")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: <stable@vger.kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/ctrl.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -671,11 +671,9 @@ static int caam_probe(struct platform_de
 	of_node_put(np);
 
 	if (!ctrlpriv->mc_en)
-		clrsetbits_32(&ctrl->mcr, MCFGR_AWCACHE_MASK | MCFGR_LONG_PTR,
+		clrsetbits_32(&ctrl->mcr, MCFGR_AWCACHE_MASK,
 			      MCFGR_AWCACHE_CACH | MCFGR_AWCACHE_BUFF |
-			      MCFGR_WDENABLE | MCFGR_LARGE_BURST |
-			      (sizeof(dma_addr_t) == sizeof(u64) ?
-			       MCFGR_LONG_PTR : 0));
+			      MCFGR_WDENABLE | MCFGR_LARGE_BURST);
 
 	handle_imx6_err005766(&ctrl->mcr);
 

[PATCH 5.5 53/56] crypto: pcrypt - Fix user-after-free on module unload

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 07bfd9bdf568a38d9440c607b72342036011f727 upstream.

On module unload of pcrypt we must unregister the crypto algorithms
first and then tear down the padata structure.  As otherwise the
crypto algorithms are still alive and can be used while the padata
structure is being freed.

Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/pcrypt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -362,11 +362,12 @@ err:
 
 static void __exit pcrypt_exit(void)
 {
+	crypto_unregister_template(&pcrypt_tmpl);
+
 	pcrypt_fini_padata(pencrypt);
 	pcrypt_fini_padata(pdecrypt);
 
 	kset_unregister(pcrypt_kset);
-	crypto_unregister_template(&pcrypt_tmpl);
 }
 
 subsys_initcall(pcrypt_init);

[PATCH 5.5 54/56] KVM: arm64: Write arch.mdcr_el2 changes since last vcpu_load on VHE

[Greg Kroah-Hartman]

From: Andrew Murray <andrew.murray@arm.com>

commit 4942dc6638b07b5326b6d2faa142635c559e7cd5 upstream.

On VHE systems arch.mdcr_el2 is written to mdcr_el2 at vcpu_load time to
set options for self-hosted debug and the performance monitors
extension.

Unfortunately the value of arch.mdcr_el2 is not calculated until
kvm_arm_setup_debug() in the run loop after the vcpu has been loaded.
This means that the initial brief iterations of the run loop use a zero
value of mdcr_el2 - until the vcpu is preempted. This also results in a
delay between changes to vcpu->guest_debug taking effect.

Fix this by writing to mdcr_el2 in kvm_arm_setup_debug() on VHE systems
when a change to arch.mdcr_el2 has been detected.

Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Cc: <stable@vger.kernel.org> # 4.17.x-
Suggested-by: James Morse <james.morse@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kvm/debug.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -101,7 +101,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 {
 	bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
-	unsigned long mdscr;
+	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
 
 	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
 
@@ -197,6 +197,10 @@ void kvm_arm_setup_debug(struct kvm_vcpu
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
 
+	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
+	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
 	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
 	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }

[PATCH 5.5 55/56] Revert "um: Enable CONFIG_CONSTRUCTORS"

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 87c9366e17259040a9118e06b6dc8de986e5d3d1 upstream.

This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS").

There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:

1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
   isn't set. Don't recall now if it just wasn't needed on my system, or
   if I never tested this case.

2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
   set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
   unexpected since whatever wanted to run is likely to have to run
   before the kernel init etc. that calls the constructors in this case.

Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:

----------------------
$ ./linux mem=512M
Core dump limits :
	soft - 0
	hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------

Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.

Thus, revert this commit.

Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Richard Weinberger <richard@nod.at>

---
 arch/um/include/asm/common.lds.S |    2 +-
 arch/um/kernel/dyn.lds.S         |    1 +
 init/Kconfig                     |    1 +
 kernel/gcov/Kconfig              |    2 +-
 4 files changed, 4 insertions(+), 2 deletions(-)

--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -82,8 +82,8 @@
 	__preinit_array_end = .;
   }
   .init_array : {
-        /* dummy - we call this ourselves */
 	__init_array_start = .;
+	*(.init_array)
 	__init_array_end = .;
   }
   .fini_array : {
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -103,6 +103,7 @@ SECTIONS
      be empty, which isn't pretty.  */
   . = ALIGN(32 / 8);
   .preinit_array     : { *(.preinit_array) }
+  .init_array     : { *(.init_array) }
   .fini_array     : { *(.fini_array) }
   .data           : {
     INIT_TASK_DATA(KERNEL_STACK_SIZE)
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -54,6 +54,7 @@ config CC_DISABLE_WARN_MAYBE_UNINITIALIZ
 
 config CONSTRUCTORS
 	bool
+	depends on !UML
 
 config IRQ_WORK
 	bool
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -4,7 +4,7 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
-	select CONSTRUCTORS
+	select CONSTRUCTORS if !UML
 	default n
 	---help---
 	This option enables gcov-based code profiling (e.g. for code coverage

[PATCH 5.5 56/56] power/supply: ingenic-battery: Dont change scale if theres only one

[Greg Kroah-Hartman]

From: Paul Cercueil <paul@crapouillou.net>

commit 86b9182df8bb12610d4d6feac45a69f3ed57bfd2 upstream.

The ADC in the JZ4740 can work either in high-precision mode with a 2.5V
range, or in low-precision mode with a 7.5V range. The code in place in
this driver will select the proper scale according to the maximum
voltage of the battery.

The JZ4770 however only has one mode, with a 6.6V range. If only one
scale is available, there's no need to change it (and nothing to change
it to), and trying to do so will fail with -EINVAL.

Fixes: fb24ccfbe1e0 ("power: supply: add Ingenic JZ47xx battery driver.")

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/ingenic-battery.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

--- a/drivers/power/supply/ingenic-battery.c
+++ b/drivers/power/supply/ingenic-battery.c
@@ -100,10 +100,17 @@ static int ingenic_battery_set_scale(str
 		return -EINVAL;
 	}
 
-	return iio_write_channel_attribute(bat->channel,
-					   scale_raw[best_idx],
-					   scale_raw[best_idx + 1],
-					   IIO_CHAN_INFO_SCALE);
+	/* Only set scale if there is more than one (fractional) entry */
+	if (scale_len > 2) {
+		ret = iio_write_channel_attribute(bat->channel,
+						  scale_raw[best_idx],
+						  scale_raw[best_idx + 1],
+						  IIO_CHAN_INFO_SCALE);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static enum power_supply_property ingenic_battery_properties[] = {

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[shuah]

On 1/30/20 11:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.5.1 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Greg Kroah-Hartman]

On Thu, Jan 30, 2020 at 09:40:28PM -0700, shuah wrote:
> On 1/30/20 11:38 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.5.1 release.
> > There are 56 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Jon Hunter]

On 30/01/2020 18:38, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.5.1 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.5:
    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	5.5.1-rc1-gad64b54689dd
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Greg Kroah-Hartman]

On Fri, Jan 31, 2020 at 11:04:11AM +0000, Jon Hunter wrote:
> 
> On 30/01/2020 18:38, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.5.1 release.
> > There are 56 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests are passing for Tegra ...
> 
> Test results for stable-v5.5:
>     13 builds:	13 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     40 tests:	40 pass, 0 fail
> 
> Linux version:	5.5.1-rc1-gad64b54689dd
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra210-p3450-0000,
>                 tegra30-cardhu-a04

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Naresh Kamboju]

On Fri, 31 Jan 2020 at 00:11, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.5.1 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.5.1-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.5.y
git commit: ad64b54689dd4e8943ba6ebd8461ab5273f4d665
git describe: v5.5-57-gad64b54689dd
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.5-oe/build/v5.5-57-gad64b54689dd

No regressions (compared to build v5.5-54-g04aed3481f3d)

No fixes (compared to build v5.5-54-g04aed3481f3d)


Ran 24154 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-commands-tests
* ltp-fs-tests
* ltp-math-tests
* ltp-open-posix-tests
* network-basic-tests
* kvm-unit-tests
* libhugetlbfs
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Greg Kroah-Hartman]

On Fri, Jan 31, 2020 at 08:24:39PM +0530, Naresh Kamboju wrote:
> On Fri, 31 Jan 2020 at 00:11, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.5.1 release.
> > There are 56 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all 3 of these and letting me know.

greg k-h

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Guenter Roeck]

On Thu, Jan 30, 2020 at 07:38:17PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.5.1 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 388 pass: 388 fail: 0

Guenter

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Greg Kroah-Hartman]

On Fri, Jan 31, 2020 at 09:32:57AM -0800, Guenter Roeck wrote:
> On Thu, Jan 30, 2020 at 07:38:17PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.5.1 release.
> > There are 56 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 157 pass: 157 fail: 0
> Qemu test results:
> 	total: 388 pass: 388 fail: 0

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.5 00/56] 5.5.1-stable review

[Jeffrin Jose]

On Thu, Jan 30, 2020 at 07:38:17PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.5.1 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Feb 2020 18:35:06 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.5.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.5.y
> and the diffstat can be found below.

hello ,

compiled and booted 5.5.1-rc1+ . No new errors according to "sudo dmesg -l err"

--
software engineer
rajagiri school of engineering and technology