[PATCH 4.4 00/53] 4.4.213-stable review

[PATCH 4.4 00/53] 4.4.213-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.213 release.
There are 53 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.213-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.213-rc1

Praveen Chaudhary <praveen5582@gmail.com>
    net: Fix skb->csum update in inet_proto_csum_replace16().

Vasily Averin <vvs@virtuozzo.com>
    l2t_seq_next should increase position index

Vasily Averin <vvs@virtuozzo.com>
    seq_tab_next() should increase position index

Finn Thain <fthain@telegraphics.com.au>
    net/sonic: Quiesce SONIC before re-initializing descriptor memory

Finn Thain <fthain@telegraphics.com.au>
    net/sonic: Fix receive buffer handling

Finn Thain <fthain@telegraphics.com.au>
    net/sonic: Use MMIO accessors

Finn Thain <fthain@telegraphics.com.au>
    net/sonic: Add mutual exclusion for accessing shared state

Madalin Bucur <madalin.bucur@oss.nxp.com>
    net/fsl: treat fsl,erratum-a011043

Manish Chopra <manishc@marvell.com>
    qlcnic: Fix CPU soft lockup while collecting firmware dump

Hayes Wang <hayeswang@realtek.com>
    r8152: get default setting of WOL before initializing

Michael Ellerman <mpe@ellerman.id.au>
    airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATE

Michael Ellerman <mpe@ellerman.id.au>
    airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATE

Vladimir Murzin <vladimir.murzin@arm.com>
    ARM: 8955/1: virt: Relax arch timer version check during early boot

Hannes Reinecke <hare@suse.de>
    scsi: fnic: do not queue commands during fwreset

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    vti[6]: fix packet tx through bpf_redirect()

Johan Hovold <johan@kernel.org>
    Input: aiptek - use descriptors of current altsetting

Arnd Bergmann <arnd@arndb.de>
    wireless: wext: avoid gcc -O3 warning

Cambda Zhu <cambda@linux.alibaba.com>
    ixgbe: Fix calculation of queue with VFs and flow director on interface flap

Radoslaw Tyl <radoslawx.tyl@intel.com>
    ixgbevf: Remove limit of 10 entries for unicast filter list

Lubomir Rintel <lkundrak@v3.sk>
    clk: mmp2: Fix the order of timer mux parents

Lee Jones <lee.jones@linaro.org>
    media: si470x-i2c: Move free() past last use of 'radio'

Bin Liu <b-liu@ti.com>
    usb: dwc3: turn off VBUS when leaving host mode

Zhenzhong Duan <zhenzhong.duan@gmail.com>
    ttyprintk: fix a potential deadlock in interrupt context issue

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: gspca: zero usb_buf

Sean Young <sean@mess.org>
    media: digitv: don't continue if remote control state can't be read

Jan Kara <jack@suse.cz>
    reiserfs: Fix memory leak of journal device string

Dan Carpenter <dan.carpenter@oracle.com>
    mm/mempolicy.c: fix out of bounds write in mpol_parse_str()

Dirk Behme <dirk.behme@de.bosch.com>
    arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: pcrypt - Fix user-after-free on module unload

Al Viro <viro@zeniv.linux.org.uk>
    vfs: fix do_last() regression

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: af_alg - Use bh_lock_sock in sk_destruct

Eric Dumazet <edumazet@google.com>
    net_sched: ematch: reject invalid TCF_EM_SIMPLE

Laura Abbott <labbott@fedoraproject.org>
    usb-storage: Disable UAS on JMicron SATA enclosure

Arnd Bergmann <arnd@arndb.de>
    atm: eni: fix uninitialized variable warning

Krzysztof Kozlowski <krzk@kernel.org>
    net: wan: sdla: Fix cast from pointer to integer of different size

Fenghua Yu <fenghua.yu@intel.com>
    drivers/net/b44: Change to non-atomic bit operations on pwol_mask

Andreas Kemnade <andreas@kemnade.info>
    watchdog: rn5t618_wdt: fix module aliases

Johan Hovold <johan@kernel.org>
    zd1211rw: fix storage endpoint lookup

Johan Hovold <johan@kernel.org>
    rtl8xxxu: fix interface sanity check

Johan Hovold <johan@kernel.org>
    brcmfmac: fix interface sanity check

Johan Hovold <johan@kernel.org>
    ath9k: fix storage endpoint lookup

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: Fix false Tx excessive retries reporting.

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: use NULLFUCTION stack on mac80211

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: correct packet types for CTS protect, mode.

Colin Ian King <colin.king@canonical.com>
    staging: wlan-ng: ensure error return is actually returned

Andrey Shvetsov <andrey.shvetsov@k2l.de>
    staging: most: net: fix buffer overflow

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: fix IrLAP framing

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: fix link-speed handling

Johan Hovold <johan@kernel.org>
    USB: serial: ir-usb: add missing endpoint sanity check

Johan Hovold <johan@kernel.org>
    rsi_91x_usb: fix interface sanity check

Johan Hovold <johan@kernel.org>
    orinoco_usb: fix interface sanity check

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Add missing copy ops check before clearing buffer


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/kernel/hyp-stub.S                         |   7 +-
 arch/arm64/boot/Makefile                           |   2 +-
 crypto/af_alg.c                                    |   6 +-
 crypto/pcrypt.c                                    |   3 +-
 drivers/atm/eni.c                                  |   4 +-
 drivers/char/ttyprintk.c                           |  15 ++-
 drivers/clk/mmp/clk-of-mmp2.c                      |   2 +-
 drivers/input/tablet/aiptek.c                      |   2 +-
 drivers/media/radio/si470x/radio-si470x-i2c.c      |   2 +-
 drivers/media/usb/dvb-usb/digitv.c                 |  10 +-
 drivers/media/usb/dvb-usb/dvb-usb-urb.c            |   2 +-
 drivers/media/usb/gspca/gspca.c                    |   2 +-
 drivers/net/ethernet/broadcom/b44.c                |   9 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c |   3 +-
 drivers/net/ethernet/chelsio/cxgb4/l2t.c           |   3 +-
 drivers/net/ethernet/freescale/xgmac_mdio.c        |   7 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |  37 ++++--
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  |   5 -
 drivers/net/ethernet/natsemi/sonic.c               | 109 ++++++++++++++---
 drivers/net/ethernet/natsemi/sonic.h               |  25 ++--
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  |   1 +
 .../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c   |   2 +
 drivers/net/usb/r8152.c                            |   9 +-
 drivers/net/wan/sdla.c                             |   2 +-
 drivers/net/wireless/airo.c                        |  20 ++-
 drivers/net/wireless/ath/ath9k/hif_usb.c           |   2 +-
 drivers/net/wireless/brcm80211/brcmfmac/usb.c      |   4 +-
 drivers/net/wireless/orinoco/orinoco_usb.c         |   4 +-
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c   |   2 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |   2 +-
 drivers/net/wireless/zd1211rw/zd_usb.c             |   2 +-
 drivers/scsi/fnic/fnic_scsi.c                      |   3 +
 drivers/staging/most/aim-network/networking.c      |  10 ++
 drivers/staging/vt6656/device.h                    |   2 +
 drivers/staging/vt6656/int.c                       |   6 +-
 drivers/staging/vt6656/main_usb.c                  |   1 +
 drivers/staging/vt6656/rxtx.c                      |  26 ++--
 drivers/staging/wlan-ng/prism2mgmt.c               |   2 +-
 drivers/usb/dwc3/core.c                            |   3 +
 drivers/usb/serial/ir-usb.c                        | 136 ++++++++++++++++-----
 drivers/usb/storage/unusual_uas.h                  |   7 +-
 drivers/watchdog/rn5t618_wdt.c                     |   1 +
 fs/namei.c                                         |   4 +-
 fs/reiserfs/super.c                                |   2 +
 include/linux/usb/irda.h                           |  13 +-
 mm/mempolicy.c                                     |   6 +-
 net/core/utils.c                                   |  20 ++-
 net/ipv4/ip_vti.c                                  |  13 +-
 net/ipv6/ip6_vti.c                                 |  13 +-
 net/sched/ematch.c                                 |   3 +
 net/wireless/wext-core.c                           |   3 +-
 sound/core/pcm_native.c                            |   2 +-
 53 files changed, 418 insertions(+), 167 deletions(-)

[PATCH 4.4 01/53] ALSA: pcm: Add missing copy ops check before clearing buffer

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ this is a fix specific to 4.4.y and 4.9.y stable trees;
  4.14.y and older already contain the right fix ]

The stable 4.4.y and 4.9.y backports of the upstream commit
add9d56d7b37 ("ALSA: pcm: Avoid possible info leaks from PCM stream
buffers") dropped the check of substream->ops->copy_user as copy_user
is a new member that isn't present in the older kernels.
Although upstream drivers should work without this NULL check, it may
cause a regression with a downstream driver that sets some
inaccessible address to runtime->dma_area, leading to a crash at
worst.

Since such drivers must have ops->copy member on older kernels instead
of ops->copy_user, this patch adds the missing check of ops->copy for
fixing the regression.

Reported-and-tested-by: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_native.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -588,7 +588,7 @@ static int snd_pcm_hw_params(struct snd_
 		runtime->boundary *= 2;
 
 	/* clear the buffer for avoiding possible kernel info leaks */
-	if (runtime->dma_area)
+	if (runtime->dma_area && !substream->ops->copy)
 		memset(runtime->dma_area, 0, runtime->dma_bytes);
 
 	snd_pcm_timer_resolution_change(substream);

[PATCH 4.4 02/53] orinoco_usb: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/orinoco/orinoco_usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -1601,9 +1601,9 @@ static int ezusb_probe(struct usb_interf
 	/* set up the endpoint information */
 	/* check out the endpoints */
 
-	iface_desc = &interface->altsetting[0].desc;
+	iface_desc = &interface->cur_altsetting->desc;
 	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-		ep = &interface->altsetting[0].endpoint[i].desc;
+		ep = &interface->cur_altsetting->endpoint[i].desc;
 
 		if (usb_endpoint_is_bulk_in(ep)) {
 			/* we found a bulk in endpoint */

[PATCH 4.4 03/53] rsi_91x_usb: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3139b180906af43bc09bd3373fc2338a8271d9d9 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -103,7 +103,7 @@ static int rsi_find_bulk_in_and_out_endp
 	__le16 buffer_size;
 	int ii, bep_found = 0;
 
-	iface_desc = &(interface->altsetting[0]);
+	iface_desc = interface->cur_altsetting;
 
 	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
 		endpoint = &(iface_desc->endpoint[ii].desc);

[PATCH 4.4 04/53] USB: serial: ir-usb: add missing endpoint sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 2988a8ae7476fe9535ab620320790d1714bdad1d upstream.

Add missing endpoint sanity check to avoid dereferencing a NULL-pointer
on open() in case a device lacks a bulk-out endpoint.

Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using
generic framework") the oops would instead happen on open() if the
device lacked a bulk-in endpoint and on write() if it lacked a bulk-out
endpoint.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -198,6 +198,9 @@ static int ir_startup(struct usb_serial
 {
 	struct usb_irda_cs_descriptor *irda_desc;
 
+	if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1)
+		return -ENODEV;
+
 	irda_desc = irda_usb_find_class_desc(serial, 0);
 	if (!irda_desc) {
 		dev_err(&serial->dev->dev,

[PATCH 4.4 05/53] USB: serial: ir-usb: fix link-speed handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org>     # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |   20 ++++++++++----------
 include/linux/usb/irda.h    |   13 ++++++++++++-
 2 files changed, 22 insertions(+), 11 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -336,34 +336,34 @@ static void ir_set_termios(struct tty_st
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -118,11 +118,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *

[PATCH 4.4 06/53] USB: serial: ir-usb: fix IrLAP framing

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 38c0d5bdf4973f9f5a888166e9d3e9ed0d32057a upstream.

Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
switched to using the generic write implementation which may combine
multiple write requests into larger transfers. This can break the IrLAP
protocol where end-of-frame is determined using the USB short packet
mechanism, for example, if multiple frames are sent in rapid succession.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ir-usb.c |  113 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 91 insertions(+), 22 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -49,9 +49,10 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
 static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
@@ -81,8 +82,9 @@ static struct usb_serial_driver ir_devic
 	.num_ports		= 1,
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
-	.open			= ir_open,
-	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.write			= ir_write,
+	.write_room		= ir_write_room,
+	.write_bulk_callback	= ir_write_bulk_callback,
 	.process_read_urb	= ir_process_read_urb,
 };
 
@@ -255,35 +257,102 @@ static int ir_startup(struct usb_serial
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
 {
-	int i;
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+	if (port->bulk_out_size == 0)
+		return -EINVAL;
 
-	/* Start reading from the device */
-	return usb_serial_generic_open(tty, port);
-}
+	if (count == 0)
+		return 0;
 
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size)
-{
-	unsigned char *buf = dest;
-	int count;
+	count = min(count, port->bulk_out_size - 1);
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+		urb = port->write_urbs[0];
+		port->tx_bytes += count;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!urb)
+		return 0;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
-	 * inbound header which indicates an additional number of BOFs and
+	 * outbound header which indicates an additional number of BOFs and
 	 * a baud rate change.
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*buf = ir_xbof | ir_baud;
+	*(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+	memcpy(urb->transfer_buffer + 1, buf, count);
+
+	urb->transfer_buffer_length = count + 1;
+	urb->transfer_flags = URB_ZERO_PACKET;
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+		spin_lock_irqsave(&port->lock, flags);
+		__set_bit(0, &port->write_urbs_free);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__set_bit(0, &port->write_urbs_free);
+	port->tx_bytes -= urb->transfer_buffer_length - 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	default:
+		dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+		break;
+	}
+
+	usb_serial_port_softint(port);
+}
+
+static int ir_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int count = 0;
+
+	if (port->bulk_out_size == 0)
+		return 0;
+
+	if (test_bit(0, &port->write_urbs_free))
+		count = port->bulk_out_size - 1;
 
-	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
-								&port->lock);
-	return count + 1;
+	return count;
 }
 
 static void ir_process_read_urb(struct urb *urb)

[PATCH 4.4 07/53] staging: most: net: fix buffer overflow

[Greg Kroah-Hartman]

From: Andrey Shvetsov <andrey.shvetsov@k2l.de>

commit 4d1356ac12f4d5180d0df345d85ff0ee42b89c72 upstream.

If the length of the socket buffer is 0xFFFFFFFF (max size for an
unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14
(ETH_HLEN).  Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN)
which overflows and results in a value of 2.  These values for
payload_len and mdp_len will pass current buffer size checks.

This patch checks if derived from skb->len sum may overflow.

The check is based on the following idea:

For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`,
`V1 + V2` overflows iif `SUM < V1`.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200116172238.6046-1-andrey.shvetsov@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/most/aim-network/networking.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/staging/most/aim-network/networking.c
+++ b/drivers/staging/most/aim-network/networking.c
@@ -87,6 +87,11 @@ static int skb_to_mamac(const struct sk_
 	unsigned int payload_len = skb->len - ETH_HLEN;
 	unsigned int mdp_len = payload_len + MDP_HDR_LEN;
 
+	if (mdp_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mdp_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mdp_len);
@@ -134,6 +139,11 @@ static int skb_to_mep(const struct sk_bu
 	u8 *buff = mbo->virt_address;
 	unsigned int mep_len = skb->len + MEP_HDR_LEN;
 
+	if (mep_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mep_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mep_len);

[PATCH 4.4 08/53] staging: wlan-ng: ensure error return is actually returned

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 4cc41cbce536876678b35e03c4a8a7bb72c78fa9 upstream.

Currently when the call to prism2sta_ifst fails a netdev_err error
is reported, error return variable result is set to -1 but the
function always returns 0 for success.  Fix this by returning
the error value in variable result rather than 0.

Addresses-Coverity: ("Unused value")
Fixes: 00b3ed168508 ("Staging: add wlan-ng prism2 usb driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/prism2mgmt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -940,7 +940,7 @@ int prism2mgmt_flashdl_state(wlandevice_
 		}
 	}
 
-	return 0;
+	return result;
 }
 
 /*----------------------------------------------------------------

[PATCH 4.4 09/53] staging: vt6656: correct packet types for CTS protect, mode.

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit d971fdd3412f8342747778fb59b8803720ed82b1 upstream.

It appears that the driver still transmits in CTS protect mode even
though it is not enabled in mac80211.

That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect.
The only difference between them GA does not use B rates.

Find if only B rate in GB or GA in protect mode otherwise transmit packets
as PK_TYPE_11A.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/9c1323ff-dbb3-0eaa-43e1-9453f7390dc0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/device.h |    2 ++
 drivers/staging/vt6656/rxtx.c   |   12 ++++++++----
 2 files changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -65,6 +65,8 @@
 #define RATE_AUTO	12
 
 #define MAX_RATE			12
+#define VNT_B_RATES	(BIT(RATE_1M) | BIT(RATE_2M) |\
+			BIT(RATE_5M) | BIT(RATE_11M))
 
 /*
  * device specific
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -815,10 +815,14 @@ int vnt_tx_packet(struct vnt_private *pr
 		if (info->band == IEEE80211_BAND_5GHZ) {
 			pkt_type = PK_TYPE_11A;
 		} else {
-			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
-				pkt_type = PK_TYPE_11GB;
-			else
-				pkt_type = PK_TYPE_11GA;
+			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+				if (priv->basic_rates & VNT_B_RATES)
+					pkt_type = PK_TYPE_11GB;
+				else
+					pkt_type = PK_TYPE_11GA;
+			} else {
+				pkt_type = PK_TYPE_11A;
+			}
 		}
 	} else {
 		pkt_type = PK_TYPE_11B;

[PATCH 4.4 10/53] staging: vt6656: use NULLFUCTION stack on mac80211

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit d579c43c82f093e63639151625b2139166c730fd upstream.

It appears that the drivers does not go into power save correctly the
NULL data packets are not being transmitted because it not enabled
in mac80211.

The driver needs to capture ieee80211_is_nullfunc headers and
copy the duration_id to it's own duration data header.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/610971ae-555b-a6c3-61b3-444a0c1e35b4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/main_usb.c |    1 +
 drivers/staging/vt6656/rxtx.c     |   14 +++++---------
 2 files changed, 6 insertions(+), 9 deletions(-)

--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1002,6 +1002,7 @@ vt6656_probe(struct usb_interface *intf,
 	ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
 	ieee80211_hw_set(priv->hw, REPORTS_TX_ACK_STATUS);
 	ieee80211_hw_set(priv->hw, SUPPORTS_PS);
+	ieee80211_hw_set(priv->hw, PS_NULLFUNC_STACK);
 
 	priv->hw->max_signal = 100;
 
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -280,11 +280,9 @@ static u16 vnt_rxtx_datahead_g(struct vn
 							PK_TYPE_11B, &buf->b);
 
 	/* Get Duration and TimeStamp */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration_a = dur;
-		buf->duration_b = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration_a = hdr->duration_id;
+		buf->duration_b = hdr->duration_id;
 	} else {
 		buf->duration_a = vnt_get_duration_le(priv,
 						tx_context->pkt_type, need_ack);
@@ -373,10 +371,8 @@ static u16 vnt_rxtx_datahead_ab(struct v
 			  tx_context->pkt_type, &buf->ab);
 
 	/* Get Duration and TimeStampOff */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration = hdr->duration_id;
 	} else {
 		buf->duration = vnt_get_duration_le(priv, tx_context->pkt_type,
 						    need_ack);

[PATCH 4.4 11/53] staging: vt6656: Fix false Tx excessive retries reporting.

[Greg Kroah-Hartman]

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 9dd631fa99dc0a0dfbd191173bf355ba30ea786a upstream.

The driver reporting  IEEE80211_TX_STAT_ACK is not being handled
correctly. The driver should only report on TSR_TMO flag is not
set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK
is being requested.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/int.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/staging/vt6656/int.c
+++ b/drivers/staging/vt6656/int.c
@@ -111,9 +111,11 @@ static int vnt_int_report_rate(struct vn
 
 	info->status.rates[0].count = tx_retry;
 
-	if (!(tsr & (TSR_TMO | TSR_RETRYTMO))) {
+	if (!(tsr & TSR_TMO)) {
 		info->status.rates[0].idx = idx;
-		info->flags |= IEEE80211_TX_STAT_ACK;
+
+		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+			info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
 	ieee80211_tx_status_irqsafe(priv->hw, context->skb);

[PATCH 4.4 12/53] ath9k: fix storage endpoint lookup

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Cc: stable <stable@vger.kernel.org>     # 2.6.39
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1211,7 +1211,7 @@ err_fw:
 static int send_eject_command(struct usb_interface *interface)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *iface_desc = &interface->altsetting[0];
+	struct usb_host_interface *iface_desc = interface->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

[PATCH 4.4 13/53] brcmfmac: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3428fbcd6e6c0850b1a8b2a12082b7b2aabb3da3 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable <stable@vger.kernel.org>     # 3.4
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmfmac/usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1352,7 +1352,7 @@ brcmf_usb_probe(struct usb_interface *in
 		goto fail;
 	}
 
-	desc = &intf->altsetting[0].desc;
+	desc = &intf->cur_altsetting->desc;
 	if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
 	    (desc->bInterfaceSubClass != 2) ||
 	    (desc->bInterfaceProtocol != 0xff)) {
@@ -1365,7 +1365,7 @@ brcmf_usb_probe(struct usb_interface *in
 
 	num_of_eps = desc->bNumEndpoints;
 	for (ep = 0; ep < num_of_eps; ep++) {
-		endpoint = &intf->altsetting[0].endpoint[ep].desc;
+		endpoint = &intf->cur_altsetting->endpoint[ep].desc;
 		endpoint_num = usb_endpoint_num(endpoint);
 		if (!usb_endpoint_xfer_bulk(endpoint))
 			continue;

[PATCH 4.4 14/53] rtl8xxxu: fix interface sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 39a4281c312f2d226c710bc656ce380c621a2b16 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable <stable@vger.kernel.org>     # 4.4
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -5555,7 +5555,7 @@ static int rtl8xxxu_parse_usb(struct rtl
 	u8 dir, xtype, num;
 	int ret = 0;
 
-	host_interface = &interface->altsetting[0];
+	host_interface = interface->cur_altsetting;
 	interface_desc = &host_interface->desc;
 	endpoints = interface_desc->bNumEndpoints;
 

[PATCH 4.4 15/53] zd1211rw: fix storage endpoint lookup

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 2d68bb2687abb747558b933e80845ff31570a49c upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device")
Cc: stable <stable@vger.kernel.org>     # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/zd1211rw/zd_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1272,7 +1272,7 @@ static void print_id(struct usb_device *
 static int eject_installer(struct usb_interface *intf)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *iface_desc = &intf->altsetting[0];
+	struct usb_host_interface *iface_desc = intf->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

[PATCH 4.4 16/53] watchdog: rn5t618_wdt: fix module aliases

[Greg Kroah-Hartman]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ]

Platform device aliases were missing so module autoloading
did not work.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/rn5t618_wdt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/watchdog/rn5t618_wdt.c b/drivers/watchdog/rn5t618_wdt.c
index d1c12278cb6a1..8b6eff26e4808 100644
--- a/drivers/watchdog/rn5t618_wdt.c
+++ b/drivers/watchdog/rn5t618_wdt.c
@@ -193,6 +193,7 @@ static struct platform_driver rn5t618_wdt_driver = {
 
 module_platform_driver(rn5t618_wdt_driver);
 
+MODULE_ALIAS("platform:rn5t618-wdt");
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
 MODULE_DESCRIPTION("RN5T618 watchdog driver");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH 4.4 17/53] drivers/net/b44: Change to non-atomic bit operations on pwol_mask

[Greg Kroah-Hartman]

From: Fenghua Yu <fenghua.yu@intel.com>

[ Upstream commit f11421ba4af706cb4f5703de34fa77fba8472776 ]

Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.

In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.

Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.

Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/b44.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index a3b1c07ae0af0..e7214edfe5b46 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1524,8 +1524,10 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
 	int ethaddr_bytes = ETH_ALEN;
 
 	memset(ppattern + offset, 0xff, magicsync);
-	for (j = 0; j < magicsync; j++)
-		set_bit(len++, (unsigned long *) pmask);
+	for (j = 0; j < magicsync; j++) {
+		pmask[len >> 3] |= BIT(len & 7);
+		len++;
+	}
 
 	for (j = 0; j < B44_MAX_PATTERNS; j++) {
 		if ((B44_PATTERN_SIZE - len) >= ETH_ALEN)
@@ -1537,7 +1539,8 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
 		for (k = 0; k< ethaddr_bytes; k++) {
 			ppattern[offset + magicsync +
 				(j * ETH_ALEN) + k] = macaddr[k];
-			set_bit(len++, (unsigned long *) pmask);
+			pmask[len >> 3] |= BIT(len & 7);
+			len++;
 		}
 	}
 	return len - 1;
-- 
2.20.1

[PATCH 4.4 18/53] net: wan: sdla: Fix cast from pointer to integer of different size

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 00c0688cecadbf7ac2f5b4cdb36d912a2d3f0cca ]

Since net_device.mem_start is unsigned long, it should not be cast to
int right before casting to pointer.  This fixes warning (compile
testing on alpha architecture):

    drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
    drivers/net/wan/sdla.c:711:13: warning:
        cast to pointer from integer of different size [-Wint-to-pointer-cast]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/sdla.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 421ac5f856994..79fd891509479 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -711,7 +711,7 @@ static netdev_tx_t sdla_transmit(struct sk_buff *skb,
 
 					spin_lock_irqsave(&sdla_lock, flags);
 					SDLA_WINDOW(dev, addr);
-					pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
+					pbuf = (void *)(dev->mem_start + (addr & SDLA_ADDR_MASK));
 					__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
 					SDLA_WINDOW(dev, addr);
 					pbuf->opp_flag = 1;
-- 
2.20.1

[PATCH 4.4 19/53] atm: eni: fix uninitialized variable warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 30780d086a83332adcd9362281201cee7c3d9d19 ]

With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
   writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
             ^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/eni.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 6339efd326972..ad591a2f7c822 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -372,7 +372,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 		here = (eni_vcc->descr+skip) & (eni_vcc->words-1);
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) | (vcc->vci
 		    << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	here = (eni_vcc->descr+size+skip) & (eni_vcc->words-1);
 	if (!eff) size += skip;
@@ -445,7 +445,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 	if (size != eff) {
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) |
 		    (vcc->vci << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	if (!j || j > 2*RX_DMA_BUF) {
 		printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n");
-- 
2.20.1

[PATCH 4.4 20/53] usb-storage: Disable UAS on JMicron SATA enclosure

[Greg Kroah-Hartman]

From: Laura Abbott <labbott@fedoraproject.org>

[ Upstream commit bc3bdb12bbb3492067c8719011576370e959a2e6 ]

Steve Ellis reported incorrect block sizes and alignement
offsets with a SATA enclosure. Adding a quirk to disable
UAS fixes the problems.

Reported-by: Steven Ellis <sellis@redhat.com>
Cc: Pacho Ramos <pachoramos@gmail.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/storage/unusual_uas.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 8ed80f28416fa..9aad6825947c8 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -162,12 +162,15 @@ UNUSUAL_DEV(0x2537, 0x1068, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_UAS),
 
-/* Reported-by: Takeo Nakayama <javhera@gmx.com> */
+/*
+ * Initially Reported-by: Takeo Nakayama <javhera@gmx.com>
+ * UAS Ignore Reported by Steven Ellis <sellis@redhat.com>
+ */
 UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
 		"JMicron",
 		"JMS566",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_REPORT_OPCODES),
+		US_FL_NO_REPORT_OPCODES | US_FL_IGNORE_UAS),
 
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
-- 
2.20.1

[PATCH 4.4 21/53] net_sched: ematch: reject invalid TCF_EM_SIMPLE

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 55cd9f67f1e45de8517cdaab985fb8e56c0bc1d8 ]

It is possible for malicious userspace to set TCF_EM_SIMPLE bit
even for matches that should not have this bit set.

This can fool two places using tcf_em_is_simple()

1) tcf_em_tree_destroy() -> memory leak of em->data
   if ops->destroy() is NULL

2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes
   of a kernel pointer.

BUG: memory leak
unreferenced object 0xffff888121850a40 (size 32):
  comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s)
  hex dump (first 32 bytes):
    00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline]
    [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline]
    [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671
    [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127
    [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline]
    [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32
    [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline]
    [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline]
    [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300
    [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline]
    [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219
    [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104
    [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415
    [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/ematch.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/sched/ematch.c
+++ b/net/sched/ematch.c
@@ -242,6 +242,9 @@ static int tcf_em_validate(struct tcf_pr
 			goto errout;
 
 		if (em->ops->change) {
+			err = -EINVAL;
+			if (em_hdr->flags & TCF_EM_SIMPLE)
+				goto errout;
 			err = em->ops->change(net, data, data_len, em);
 			if (err < 0)
 				goto errout;

[PATCH 4.4 22/53] crypto: af_alg - Use bh_lock_sock in sk_destruct

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 37f96694cf73ba116993a9d2d99ad6a75fa7fdb0 upstream.

As af_alg_release_parent may be called from BH context (most notably
due to an async request that only completes after socket closure,
or as reported here because of an RCU-delayed sk_destruct call), we
must use bh_lock_sock instead of lock_sock.

Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c840ac6af3f8 ("crypto: af_alg - Disallow bind/setkey/...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/af_alg.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -136,11 +136,13 @@ void af_alg_release_parent(struct sock *
 	sk = ask->parent;
 	ask = alg_sk(sk);
 
-	lock_sock(sk);
+	local_bh_disable();
+	bh_lock_sock(sk);
 	ask->nokey_refcnt -= nokey;
 	if (!last)
 		last = !--ask->refcnt;
-	release_sock(sk);
+	bh_unlock_sock(sk);
+	local_bh_enable();
 
 	if (last)
 		sock_put(sk);

[PATCH 4.4 23/53] vfs: fix do_last() regression

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 6404674acd596de41fd3ad5f267b4525494a891a upstream.

Brown paperbag time: fetching ->i_uid/->i_mode really should've been
done from nd->inode.  I even suggested that, but the reason for that has
slipped through the cracks and I went for dir->d_inode instead - made
for more "obvious" patch.

Analysis:

 - at the entry into do_last() and all the way to step_into(): dir (aka
   nd->path.dentry) is known not to have been freed; so's nd->inode and
   it's equal to dir->d_inode unless we are already doomed to -ECHILD.
   inode of the file to get opened is not known.

 - after step_into(): inode of the file to get opened is known; dir
   might be pointing to freed memory/be negative/etc.

 - at the call of may_create_in_sticky(): guaranteed to be out of RCU
   mode; inode of the file to get opened is known and pinned; dir might
   be garbage.

The last was the reason for the original patch.  Except that at the
do_last() entry we can be in RCU mode and it is possible that
nd->path.dentry->d_inode has already changed under us.

In that case we are going to fail with -ECHILD, but we need to be
careful; nd->inode is pointing to valid struct inode and it's the same
as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we
should use that.

Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com
Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Fixes: d0cb50185ae9 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/namei.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/namei.c
+++ b/fs/namei.c
@@ -3060,8 +3060,8 @@ static int do_last(struct nameidata *nd,
 		   int *opened)
 {
 	struct dentry *dir = nd->path.dentry;
-	kuid_t dir_uid = dir->d_inode->i_uid;
-	umode_t dir_mode = dir->d_inode->i_mode;
+	kuid_t dir_uid = nd->inode->i_uid;
+	umode_t dir_mode = nd->inode->i_mode;
 	int open_flag = op->open_flag;
 	bool will_truncate = (open_flag & O_TRUNC) != 0;
 	bool got_write = false;

[PATCH 4.4 24/53] crypto: pcrypt - Fix user-after-free on module unload

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 07bfd9bdf568a38d9440c607b72342036011f727 ]

On module unload of pcrypt we must unregister the crypto algorithms
first and then tear down the padata structure.  As otherwise the
crypto algorithms are still alive and can be used while the padata
structure is being freed.

Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/pcrypt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index a5718c0a3dc4e..1348541da463a 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -505,11 +505,12 @@ static int __init pcrypt_init(void)
 
 static void __exit pcrypt_exit(void)
 {
+	crypto_unregister_template(&pcrypt_tmpl);
+
 	pcrypt_fini_padata(&pencrypt);
 	pcrypt_fini_padata(&pdecrypt);
 
 	kset_unregister(pcrypt_kset);
-	crypto_unregister_template(&pcrypt_tmpl);
 }
 
 module_init(pcrypt_init);
-- 
2.20.1

[PATCH 4.4 25/53] arm64: kbuild: remove compressed images on make ARCH=arm64 (dist)clean

[Greg Kroah-Hartman]

From: Dirk Behme <dirk.behme@de.bosch.com>

commit d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream.

Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed
Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo}
AArch64 images. However, the commit missed adding support for removing
those images on 'make ARCH=arm64 (dist)clean'.

Fix this by adding them to the target list.
Make sure to match the order of the recipes in the makefile.

Cc: stable@vger.kernel.org # v4.3+
Fixes: 0723c05fb75e44 ("arm64: enable more compressed Image formats")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -14,7 +14,7 @@
 # Based on the ia64 boot/Makefile.
 #
 
-targets := Image Image.gz
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)

[PATCH 4.4 26/53] mm/mempolicy.c: fix out of bounds write in mpol_parse_str()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit c7a91bc7c2e17e0a9c8b9745a2cb118891218fd1 upstream.

What we are trying to do is change the '=' character to a NUL terminator
and then at the end of the function we restore it back to an '='.  The
problem is there are two error paths where we jump to the end of the
function before we have replaced the '=' with NUL.

We end up putting the '=' in the wrong place (possibly one element
before the start of the buffer).

Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain
Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com
Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mempolicy.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2701,6 +2701,9 @@ int mpol_parse_str(char *str, struct mem
 	char *flags = strchr(str, '=');
 	int err = 1;
 
+	if (flags)
+		*flags++ = '\0';	/* terminate mode string */
+
 	if (nodelist) {
 		/* NUL-terminate mode or flags string */
 		*nodelist++ = '\0';
@@ -2711,9 +2714,6 @@ int mpol_parse_str(char *str, struct mem
 	} else
 		nodes_clear(nodes);
 
-	if (flags)
-		*flags++ = '\0';	/* terminate mode string */
-
 	for (mode = 0; mode < MPOL_MAX; mode++) {
 		if (!strcmp(str, policy_modes[mode])) {
 			break;

[PATCH 4.4 27/53] reiserfs: Fix memory leak of journal device string

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.

When a filesystem is mounted with jdev mount option, we store the
journal device name in an allocated string in superblock. However we
fail to ever free that string. Fix it.

Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com
Fixes: c3aa077648e1 ("reiserfs: Properly display mount options in /proc/mounts")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/reiserfs/super.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -599,6 +599,7 @@ static void reiserfs_put_super(struct su
 	reiserfs_write_unlock(s);
 	mutex_destroy(&REISERFS_SB(s)->lock);
 	destroy_workqueue(REISERFS_SB(s)->commit_wq);
+	kfree(REISERFS_SB(s)->s_jdev);
 	kfree(s->s_fs_info);
 	s->s_fs_info = NULL;
 }
@@ -2208,6 +2209,7 @@ error_unlocked:
 			kfree(qf_names[j]);
 	}
 #endif
+	kfree(sbi->s_jdev);
 	kfree(sbi);
 
 	s->s_fs_info = NULL;

[PATCH 4.4 28/53] media: digitv: dont continue if remote control state cant be read

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit eecc70d22ae51225de1ef629c1159f7116476b2e upstream.

This results in an uninitialized variable read.

Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/digitv.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -226,18 +226,22 @@ static struct rc_map_table rc_map_digitv
 
 static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	int i;
+	int ret, i;
 	u8 key[5];
 	u8 b[4] = { 0 };
 
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4);
+	ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, &key[1], 4);
+	if (ret)
+		return ret;
 
 	/* Tell the device we've read the remote. Not sure how necessary
 	   this is, but the Nebula SDK does it. */
-	digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+	ret = digitv_ctrl_msg(d, USB_WRITE_REMOTE, 0, b, 4, NULL, 0);
+	if (ret)
+		return ret;
 
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)

[PATCH 4.4 29/53] media: gspca: zero usb_buf

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

commit de89d0864f66c2a1b75becfdd6bf3793c07ce870 upstream.

Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to
ensure it is property zeroed. This fixes various syzbot errors
about uninitialized data.

Syzbot links:

https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074
https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2
https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e

Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/gspca/gspca.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -2028,7 +2028,7 @@ int gspca_dev_probe2(struct usb_interfac
 		pr_err("couldn't kzalloc gspca struct\n");
 		return -ENOMEM;
 	}
-	gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+	gspca_dev->usb_buf = kzalloc(USB_BUF_SZ, GFP_KERNEL);
 	if (!gspca_dev->usb_buf) {
 		pr_err("out of memory\n");
 		ret = -ENOMEM;

[PATCH 4.4 30/53] media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

commit 569bc8d6a6a50acb5fcf07fb10b8d2d461fdbf93 upstream.

This fixes a syzbot failure since actlen could be uninitialized,
but it was still used.

Syzbot link:

https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1

Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/dvb-usb-urb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-urb.c
@@ -11,7 +11,7 @@
 int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
 	u16 rlen, int delay_ms)
 {
-	int actlen,ret = -ENOMEM;
+	int actlen = 0, ret = -ENOMEM;
 
 	if (!d || wbuf == NULL || wlen == 0)
 		return -EINVAL;

[PATCH 4.4 31/53] ttyprintk: fix a potential deadlock in interrupt context issue

[Greg Kroah-Hartman]

From: Zhenzhong Duan <zhenzhong.duan@gmail.com>

commit 9a655c77ff8fc65699a3f98e237db563b37c439b upstream.

tpk_write()/tpk_close() could be interrupted when holding a mutex, then
in timer handler tpk_write() may be called again trying to acquire same
mutex, lead to deadlock.

Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP
enabled:

BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1
1 lock held by swapper/1/0:
...
Call Trace:
  <IRQ>
  dump_stack+0x197/0x210
  ___might_sleep.cold+0x1fb/0x23e
  __might_sleep+0x95/0x190
  __mutex_lock+0xc5/0x13c0
  mutex_lock_nested+0x16/0x20
  tpk_write+0x5d/0x340
  resync_tnc+0x1b6/0x320
  call_timer_fn+0x1ac/0x780
  run_timer_softirq+0x6c3/0x1790
  __do_softirq+0x262/0x98c
  irq_exit+0x19b/0x1e0
  smp_apic_timer_interrupt+0x1a3/0x610
  apic_timer_interrupt+0xf/0x20
  </IRQ>

See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for
more details.

Fix it by using spinlock in process context instead of mutex and having
interrupt disabled in critical section.

Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ttyprintk.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -18,10 +18,11 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
-	struct mutex port_write_mutex;
+	spinlock_t spinlock;
 };
 
 static struct ttyprintk_port tpk_port;
@@ -107,11 +108,12 @@ static int tpk_open(struct tty_struct *t
 static void tpk_close(struct tty_struct *tty, struct file *filp)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	/* flush tpk_printk buffer */
 	tpk_printk(NULL, 0);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	tty_port_close(&tpkp->port, tty, filp);
 }
@@ -123,13 +125,14 @@ static int tpk_write(struct tty_struct *
 		const unsigned char *buf, int count)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 	int ret;
 
 
 	/* exclusive use of tpk_printk within this tty */
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	ret = tpk_printk(buf, count);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	return ret;
 }
@@ -179,7 +182,7 @@ static int __init ttyprintk_init(void)
 {
 	int ret = -ENOMEM;
 
-	mutex_init(&tpk_port.port_write_mutex);
+	spin_lock_init(&tpk_port.spinlock);
 
 	ttyprintk_driver = tty_alloc_driver(1,
 			TTY_DRIVER_RESET_TERMIOS |

[PATCH 4.4 32/53] usb: dwc3: turn off VBUS when leaving host mode

[Greg Kroah-Hartman]

From: Bin Liu <b-liu@ti.com>

[ Upstream commit 09ed259fac621634d51cd986aa8d65f035662658 ]

VBUS should be turned off when leaving the host mode.
Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to
turn off VBUS power.

Fixes: 5f94adfeed97 ("usb: dwc3: core: refactor mode initialization to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 4378e758baef9..591bc3f7be763 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -801,6 +801,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		/* do nothing */
 		break;
 	}
+
+	/* de-assert DRVVBUS for HOST and OTG mode */
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
-- 
2.20.1

[PATCH 4.4 33/53] media: si470x-i2c: Move free() past last use of radio

[Greg Kroah-Hartman]

From: Lee Jones <lee.jones@linaro.org>

A pointer to 'struct si470x_device' is currently used after free:

  drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference
    preceded by free on line 460

Shift the call to free() down past its final use.

NB: Not sending to Mainline, since the problem does not exist there, it was
caused by the backport of 2df200ab234a ("media: si470x-i2c: add missed
operations in remove") to the stable trees.

Cc: <stable@vger.kernel.org> # v3.18+
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/radio/si470x/radio-si470x-i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -458,10 +458,10 @@ static int si470x_i2c_remove(struct i2c_
 
 	free_irq(client->irq, radio);
 	video_unregister_device(&radio->videodev);
-	kfree(radio);
 
 	v4l2_ctrl_handler_free(&radio->hdl);
 	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio);
 	return 0;
 }
 

[PATCH 4.4 34/53] clk: mmp2: Fix the order of timer mux parents

[Greg Kroah-Hartman]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 8bea5ac0fbc5b2103f8779ddff216122e3c2e1ad ]

Determined empirically, no documentation is available.

The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but
thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing
what is going on, ended up just dividing the rate as of
commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")'

Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 8b45cb2caed1b..60db6531996eb 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -134,7 +134,7 @@ static DEFINE_SPINLOCK(ssp3_lock);
 static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
 
 static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
+static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
 
 static DEFINE_SPINLOCK(reset_lock);
 
-- 
2.20.1

[PATCH 4.4 35/53] ixgbevf: Remove limit of 10 entries for unicast filter list

[Greg Kroah-Hartman]

From: Radoslaw Tyl <radoslawx.tyl@intel.com>

[ Upstream commit aa604651d523b1493988d0bf6710339f3ee60272 ]

Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.

Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 723bda33472a7..0fa94ebf0411b 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1861,11 +1861,6 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	int count = 0;
 
-	if ((netdev_uc_count(netdev)) > 10) {
-		pr_err("Too many unicast filters - No Space\n");
-		return -ENOSPC;
-	}
-
 	if (!netdev_uc_empty(netdev)) {
 		struct netdev_hw_addr *ha;
 
-- 
2.20.1

[PATCH 4.4 36/53] ixgbe: Fix calculation of queue with VFs and flow director on interface flap

[Greg Kroah-Hartman]

From: Cambda Zhu <cambda@linux.alibaba.com>

[ Upstream commit 4fad78ad6422d9bca62135bbed8b6abc4cbb85b8 ]

This patch fixes the calculation of queue when we restore flow director
filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's
vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 37 ++++++++++++++-----
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 4521181aa0ed9..23fb344f9e1cf 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4532,7 +4532,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct hlist_node *node2;
 	struct ixgbe_fdir_filter *filter;
-	u64 action;
+	u8 queue;
 
 	spin_lock(&adapter->fdir_perfect_lock);
 
@@ -4541,17 +4541,34 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 
 	hlist_for_each_entry_safe(filter, node2,
 				  &adapter->fdir_filter_list, fdir_node) {
-		action = filter->action;
-		if (action != IXGBE_FDIR_DROP_QUEUE && action != 0)
-			action =
-			(action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1;
+		if (filter->action == IXGBE_FDIR_DROP_QUEUE) {
+			queue = IXGBE_FDIR_DROP_QUEUE;
+		} else {
+			u32 ring = ethtool_get_flow_spec_ring(filter->action);
+			u8 vf = ethtool_get_flow_spec_ring_vf(filter->action);
+
+			if (!vf && (ring >= adapter->num_rx_queues)) {
+				e_err(drv, "FDIR restore failed without VF, ring: %u\n",
+				      ring);
+				continue;
+			} else if (vf &&
+				   ((vf > adapter->num_vfs) ||
+				     ring >= adapter->num_rx_queues_per_pool)) {
+				e_err(drv, "FDIR restore failed with VF, vf: %hhu, ring: %u\n",
+				      vf, ring);
+				continue;
+			}
+
+			/* Map the ring onto the absolute queue index */
+			if (!vf)
+				queue = adapter->rx_ring[ring]->reg_idx;
+			else
+				queue = ((vf - 1) *
+					adapter->num_rx_queues_per_pool) + ring;
+		}
 
 		ixgbe_fdir_write_perfect_filter_82599(hw,
-				&filter->filter,
-				filter->sw_idx,
-				(action == IXGBE_FDIR_DROP_QUEUE) ?
-				IXGBE_FDIR_DROP_QUEUE :
-				adapter->rx_ring[action]->reg_idx);
+				&filter->filter, filter->sw_idx, queue);
 	}
 
 	spin_unlock(&adapter->fdir_perfect_lock);
-- 
2.20.1

[PATCH 4.4 37/53] wireless: wext: avoid gcc -O3 warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]

After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3,
the wext code produces a bogus warning:

In function 'iw_handler_get_iwstats',
    inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9,
    inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10,
    inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8,
    inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
   memcpy(extra, stats, sizeof(struct iw_statistics));
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here

The problem is that ioctl_standard_call() sometimes calls the handler
with a NULL argument that would cause a problem for iw_handler_get_iwstats.
However, iw_handler_get_iwstats never actually gets called that way.

Marking that function as noinline avoids the warning and leads
to slightly smaller object code as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/wext-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
index b50ee5d622e14..843d2cf1e6a6c 100644
--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -656,7 +656,8 @@ struct iw_statistics *get_wireless_stats(struct net_device *dev)
 	return NULL;
 }
 
-static int iw_handler_get_iwstats(struct net_device *		dev,
+/* noinline to avoid a bogus warning with -O3 */
+static noinline int iw_handler_get_iwstats(struct net_device *	dev,
 				  struct iw_request_info *	info,
 				  union iwreq_data *		wrqu,
 				  char *			extra)
-- 
2.20.1

[PATCH 4.4 38/53] Input: aiptek - use descriptors of current altsetting

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit cfa4f6a99fb183742cace65ec551b444852b8ef6 ]

Make sure to always use the descriptors of the current alternate setting
to avoid future issues when accessing fields that may differ between
settings.

Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-4-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/tablet/aiptek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 40a166773c1b4..142f34a0a3cb6 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1731,7 +1731,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	aiptek->inputdev = inputdev;
 	aiptek->usbdev = usbdev;
 	aiptek->intf = intf;
-	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+	aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	aiptek->inDelay = 0;
 	aiptek->endDelay = 0;
 	aiptek->previousJitterable = 0;
-- 
2.20.1

[PATCH 4.4 39/53] vti[6]: fix packet tx through bpf_redirect()

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit 95224166a9032ff5d08fca633d37113078ce7d01 ]

With an ebpf program that redirects packets through a vti[6] interface,
the packets are dropped because no dst is attached.

This could also be reproduced with an AF_PACKET socket, with the following
python script (vti1 is an ip_vti interface):

 import socket
 send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('vti1', 0x800, 0, 0))

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_vti.c  | 13 +++++++++++--
 net/ipv6/ip6_vti.c | 13 +++++++++++--
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index bbcbbc1cc2cc6..42dbd280dc9be 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -195,8 +195,17 @@ static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
 	int err;
 
 	if (!dst) {
-		dev->stats.tx_carrier_errors++;
-		goto tx_error_icmp;
+		struct rtable *rt;
+
+		fl->u.ip4.flowi4_oif = dev->ifindex;
+		fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+		rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+		if (IS_ERR(rt)) {
+			dev->stats.tx_carrier_errors++;
+			goto tx_error_icmp;
+		}
+		dst = &rt->dst;
+		skb_dst_set(skb, dst);
 	}
 
 	dst_hold(dst);
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 51da5987952ce..623963a2d8a68 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -441,8 +441,17 @@ vti6_xmit(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
 	int err = -1;
 	int mtu;
 
-	if (!dst)
-		goto tx_err_link_failure;
+	if (!dst) {
+		fl->u.ip6.flowi6_oif = dev->ifindex;
+		fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+		dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+		if (dst->error) {
+			dst_release(dst);
+			dst = NULL;
+			goto tx_err_link_failure;
+		}
+		skb_dst_set(skb, dst);
+	}
 
 	dst_hold(dst);
 	dst = xfrm_lookup(t->net, dst, fl, NULL, 0);
-- 
2.20.1

[PATCH 4.4 40/53] scsi: fnic: do not queue commands during fwreset

[Greg Kroah-Hartman]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 0e2209629fec427ba75a6351486153a9feddd36b ]

When a link is going down the driver will be calling fnic_cleanup_io(),
which will traverse all commands and calling 'done' for each found command.
While the traversal is handled under the host_lock, calling 'done' happens
after the host_lock is being dropped.

As fnic_queuecommand_lck() is being called with the host_lock held, it
might well be that it will pick the command being selected for abortion
from the above routine and enqueue it for sending, but then 'done' is being
called on that very command from the above routine.

Which of course confuses the hell out of the scsi midlayer.

So fix this by not queueing commands when fnic_cleanup_io is active.

Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/fnic/fnic_scsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 82e4bc8c11c57..fc6706b12ac76 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -446,6 +446,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 	if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED)))
 		return SCSI_MLQUEUE_HOST_BUSY;
 
+	if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_FWRESET)))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	rport = starget_to_rport(scsi_target(sc->device));
 	ret = fc_remote_port_chkready(rport);
 	if (ret) {
-- 
2.20.1

[PATCH 4.4 41/53] ARM: 8955/1: virt: Relax arch timer version check during early boot

[Greg Kroah-Hartman]

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit 6849b5eba1965ceb0cad3a75877ef4569dd3638e ]

Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to
have values other than 0 or 1 while still preserving backward
compatibility. At the moment, Linux is quite strict in the way it
handles this field at early boot and will not configure arch timer if
it doesn't find the value 1.

Since here use ubfx for arch timer version extraction (hyb-stub build
with -march=armv7-a, so it is safe)

To help backports (even though the code was correct at the time of writing)

Fixes: 8ec58be9f3ff ("ARM: virt: arch_timers: enable access to physical timers")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/hyp-stub.S | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 2a55373f49bfb..f9948363111d1 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -144,10 +144,9 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
-	lsr	r7, #16
-	and	r7, #0xf
-	cmp	r7, #1
-	bne	1f
+	ubfx	r7, r7, #16, #4
+	teq	r7, #0
+	beq	1f
 	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
 	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
 	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL
-- 
2.20.1

[PATCH 4.4 42/53] airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATE

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit d6bce2137f5d6bb1093e96d2f801479099b28094 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command and a length. Some of the commands are handled in
readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes.

That buffer is then passed to PC4500_readrid(), which has two cases.
The else case does some setup and then reads up to RIDSIZE bytes from
the hardware into the kmalloc()'ed buffer.

Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer:

	// read the rid length field
	bap_read(ai, pBuf, 2, BAP1);
	// length for remaining part of rid
	len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2;
	...
	// read remainder of the rid
	rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1);

PC4500_readrid() then returns to readrids() which does:

	len = comp->len;
	if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {

Where comp->len is the user controlled length field.

So if the "rid length field" returned by the hardware is < 2048, and
the user requests 2048 bytes in comp->len, we will leak the previous
contents of the kmalloc()'ed buffer to userspace.

Fix it by kzalloc()'ing the buffer.

Found by Ilja by code inspection, not tested as I don't have the
required hardware.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 82d24f2b9c190..94df9ddfb7eb1 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -7831,7 +7831,7 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 		return -EINVAL;
 	}
 
-	if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+	if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 
 	PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1);
-- 
2.20.1

[PATCH 4.4 43/53] airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATE

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command. Some of the commands are handled in readrids(),
where the user controlled command is converted into a driver-internal
value called "ridcode".

There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which
correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM
respectively. These commands both have checks that the user has
CAP_NET_ADMIN, with the comment that "Only super-user can read WEP
keys", otherwise they return -EPERM.

However there is another command value, AIRORRID, that lets the user
specify the ridcode value directly, with no other checks. This means
the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and
AIROGWEPKNV.

Fix it by moving the CAP_NET_ADMIN check out of the command handling
and instead do it later based on the ridcode. That way regardless of
whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed
in using AIRORID, we always do the CAP_NET_ADMIN check.

Found by Ilja by code inspection, not tested as I don't have the
required hardware.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/airo.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 94df9ddfb7eb1..a44496d8423ab 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -7808,16 +7808,8 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 	case AIROGVLIST:    ridcode = RID_APLIST;       break;
 	case AIROGDRVNAM:   ridcode = RID_DRVNAME;      break;
 	case AIROGEHTENC:   ridcode = RID_ETHERENCAP;   break;
-	case AIROGWEPKTMP:  ridcode = RID_WEP_TEMP;
-		/* Only super-user can read WEP keys */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		break;
-	case AIROGWEPKNV:   ridcode = RID_WEP_PERM;
-		/* Only super-user can read WEP keys */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		break;
+	case AIROGWEPKTMP:  ridcode = RID_WEP_TEMP;	break;
+	case AIROGWEPKNV:   ridcode = RID_WEP_PERM;	break;
 	case AIROGSTAT:     ridcode = RID_STATUS;       break;
 	case AIROGSTATSD32: ridcode = RID_STATSDELTA;   break;
 	case AIROGSTATSC32: ridcode = RID_STATS;        break;
@@ -7831,6 +7823,12 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 		return -EINVAL;
 	}
 
+	if (ridcode == RID_WEP_TEMP || ridcode == RID_WEP_PERM) {
+		/* Only super-user can read WEP keys */
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+	}
+
 	if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH 4.4 44/53] r8152: get default setting of WOL before initializing

[Greg Kroah-Hartman]

From: Hayes Wang <hayeswang@realtek.com>

[ Upstream commit 9583a3638dc07cc1878f41265e85ed497f72efcb ]

Initailization would reset runtime suspend by tp->saved_wolopts, so
the tp->saved_wolopts should be set before initializing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index db8b489b0513c..23e299c86b814 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4313,6 +4313,11 @@ static int rtl8152_probe(struct usb_interface *intf,
 
 	intf->needs_remote_wakeup = 1;
 
+	if (!rtl_can_wakeup(tp))
+		__rtl_set_wol(tp, 0);
+	else
+		tp->saved_wolopts = __rtl_get_wol(tp);
+
 	tp->rtl_ops.init(tp);
 	set_ethernet_addr(tp);
 
@@ -4325,10 +4330,6 @@ static int rtl8152_probe(struct usb_interface *intf,
 		goto out1;
 	}
 
-	if (!rtl_can_wakeup(tp))
-		__rtl_set_wol(tp, 0);
-
-	tp->saved_wolopts = __rtl_get_wol(tp);
 	if (tp->saved_wolopts)
 		device_set_wakeup_enable(&udev->dev, true);
 	else
-- 
2.20.1

[PATCH 4.4 45/53] qlcnic: Fix CPU soft lockup while collecting firmware dump

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 22e984493a41bf8081f13d9ed84def3ca8cfd427 ]

Driver while collecting firmware dump takes longer time to
collect/process some of the firmware dump entries/memories.
Bigger capture masks makes it worse as it results in larger
amount of data being collected and results in CPU soft lockup.
Place cond_resched() in some of the driver flows that are
expectedly time consuming to relinquish the CPU to avoid CPU
soft lockup panic.

Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Yonggen Xu <Yonggen.Xu@dell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 1 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c  | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index bf892160dd5f0..26263a192a77e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2047,6 +2047,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev,
 			break;
 		}
 		entry += p_hdr->size;
+		cond_resched();
 	}
 	p_dev->ahw->reset.seq_index = index;
 }
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index cda9e604a95f6..e5ea8e972b915 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -703,6 +703,7 @@ static u32 qlcnic_read_memory_test_agent(struct qlcnic_adapter *adapter,
 		addr += 16;
 		reg_read -= 16;
 		ret += 16;
+		cond_resched();
 	}
 out:
 	mutex_unlock(&adapter->ahw->mem_lock);
@@ -1383,6 +1384,7 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 		buf_offset += entry->hdr.cap_size;
 		entry_offset += entry->hdr.offset;
 		buffer = fw_dump->data + buf_offset;
+		cond_resched();
 	}
 
 	fw_dump->clr = 1;
-- 
2.20.1

[PATCH 4.4 46/53] net/fsl: treat fsl,erratum-a011043

[Greg Kroah-Hartman]

From: Madalin Bucur <madalin.bucur@oss.nxp.com>

[ Upstream commit 1d3ca681b9d9575ccf696ebc2840a1ebb1fd4074 ]

When fsl,erratum-a011043 is set, adjust for erratum A011043:
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/xgmac_mdio.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index 7b8fe866f6038..a15b4a97c172d 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -49,6 +49,7 @@ struct tgec_mdio_controller {
 struct mdio_fsl_priv {
 	struct	tgec_mdio_controller __iomem *mdio_base;
 	bool	is_little_endian;
+	bool	has_a011043;
 };
 
 static u32 xgmac_read32(void __iomem *regs,
@@ -226,7 +227,8 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 		return ret;
 
 	/* Return all Fs if nothing was there */
-	if (xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) {
+	if ((xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
+	    !priv->has_a011043) {
 		dev_err(&bus->dev,
 			"Error while reading PHY%d reg at %d.%hhu\n",
 			phy_id, dev_addr, regnum);
@@ -277,6 +279,9 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 	else
 		priv->is_little_endian = false;
 
+	priv->has_a011043 = of_property_read_bool(pdev->dev.of_node,
+						  "fsl,erratum-a011043");
+
 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");
-- 
2.20.1

[PATCH 4.4 47/53] net/sonic: Add mutual exclusion for accessing shared state

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 865ad2f2201dc18685ba2686f13217f8b3a9c52c ]

The netif_stop_queue() call in sonic_send_packet() races with the
netif_wake_queue() call in sonic_interrupt(). This causes issues
like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out".
Fix this by disabling interrupts when accessing tx_skb[] and next_tx.
Update a comment to clarify the synchronization properties.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/sonic.c | 49 ++++++++++++++++++++--------
 drivers/net/ethernet/natsemi/sonic.h |  1 +
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 6679005782499..0374e834f865e 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -50,6 +50,8 @@ static int sonic_open(struct net_device *dev)
 	if (sonic_debug > 2)
 		printk("sonic_open: initializing sonic driver.\n");
 
+	spin_lock_init(&lp->lock);
+
 	for (i = 0; i < SONIC_NUM_RRS; i++) {
 		struct sk_buff *skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
 		if (skb == NULL) {
@@ -194,8 +196,6 @@ static void sonic_tx_timeout(struct net_device *dev)
  *   wake the tx queue
  * Concurrently with all of this, the SONIC is potentially writing to
  * the status flags of the TDs.
- * Until some mutual exclusion is added, this code will not work with SMP. However,
- * MIPS Jazz machines and m68k Macs were all uni-processor machines.
  */
 
 static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
@@ -203,7 +203,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	struct sonic_local *lp = netdev_priv(dev);
 	dma_addr_t laddr;
 	int length;
-	int entry = lp->next_tx;
+	int entry;
+	unsigned long flags;
 
 	if (sonic_debug > 2)
 		printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev);
@@ -226,6 +227,10 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_OK;
 	}
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	entry = lp->next_tx;
+
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
 	sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1);   /* single fragment */
 	sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */
@@ -235,10 +240,6 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	sonic_tda_put(dev, entry, SONIC_TD_LINK,
 		sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);
 
-	/*
-	 * Must set tx_skb[entry] only after clearing status, and
-	 * before clearing EOL and before stopping queue
-	 */
 	wmb();
 	lp->tx_len[entry] = length;
 	lp->tx_laddr[entry] = laddr;
@@ -263,6 +264,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
 
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	return NETDEV_TX_OK;
 }
 
@@ -275,9 +278,21 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	struct sonic_local *lp = netdev_priv(dev);
 	int status;
+	unsigned long flags;
+
+	/* The lock has two purposes. Firstly, it synchronizes sonic_interrupt()
+	 * with sonic_send_packet() so that the two functions can share state.
+	 * Secondly, it makes sonic_interrupt() re-entrant, as that is required
+	 * by macsonic which must use two IRQs with different priority levels.
+	 */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	if (!status) {
+		spin_unlock_irqrestore(&lp->lock, flags);
 
-	if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT))
 		return IRQ_NONE;
+	}
 
 	do {
 		if (status & SONIC_INT_PKTRX) {
@@ -292,11 +307,12 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 			int td_status;
 			int freed_some = 0;
 
-			/* At this point, cur_tx is the index of a TD that is one of:
-			 *   unallocated/freed                          (status set   & tx_skb[entry] clear)
-			 *   allocated and sent                         (status set   & tx_skb[entry] set  )
-			 *   allocated and not yet sent                 (status clear & tx_skb[entry] set  )
-			 *   still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear)
+			/* The state of a Transmit Descriptor may be inferred
+			 * from { tx_skb[entry], td_status } as follows.
+			 * { clear, clear } => the TD has never been used
+			 * { set,   clear } => the TD was handed to SONIC
+			 * { set,   set   } => the TD was handed back
+			 * { clear, set   } => the TD is available for re-use
 			 */
 
 			if (sonic_debug > 2)
@@ -398,7 +414,12 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 		/* load CAM done */
 		if (status & SONIC_INT_LCD)
 			SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */
-	} while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT));
+
+		status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	} while (status);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index 07091dd27e5df..1fd61d7f79bcb 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -320,6 +320,7 @@ struct sonic_local {
 	unsigned int next_tx;          /* next free TD */
 	struct device *device;         /* generic device */
 	struct net_device_stats stats;
+	spinlock_t lock;
 };
 
 #define TX_TIMEOUT (3 * HZ)
-- 
2.20.1

[PATCH 4.4 48/53] net/sonic: Use MMIO accessors

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit e3885f576196ddfc670b3d53e745de96ffcb49ab ]

The driver accesses descriptor memory which is simultaneously accessed by
the chip, so the compiler must not be allowed to re-order CPU accesses.
sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should
have done so too but was overlooked.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/sonic.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index 1fd61d7f79bcb..a009a99c0e544 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -342,30 +342,30 @@ static void sonic_tx_timeout(struct net_device *dev);
    as far as we can tell. */
 /* OpenBSD calls this "SWO".  I'd like to think that sonic_buf_put()
    is a much better name. */
-static inline void sonic_buf_put(void* base, int bitmode,
+static inline void sonic_buf_put(u16 *base, int bitmode,
 				 int offset, __u16 val)
 {
 	if (bitmode)
 #ifdef __BIG_ENDIAN
-		((__u16 *) base + (offset*2))[1] = val;
+		__raw_writew(val, base + (offset * 2) + 1);
 #else
-		((__u16 *) base + (offset*2))[0] = val;
+		__raw_writew(val, base + (offset * 2) + 0);
 #endif
 	else
-	 	((__u16 *) base)[offset] = val;
+		__raw_writew(val, base + (offset * 1) + 0);
 }
 
-static inline __u16 sonic_buf_get(void* base, int bitmode,
+static inline __u16 sonic_buf_get(u16 *base, int bitmode,
 				  int offset)
 {
 	if (bitmode)
 #ifdef __BIG_ENDIAN
-		return ((volatile __u16 *) base + (offset*2))[1];
+		return __raw_readw(base + (offset * 2) + 1);
 #else
-		return ((volatile __u16 *) base + (offset*2))[0];
+		return __raw_readw(base + (offset * 2) + 0);
 #endif
 	else
-		return ((volatile __u16 *) base)[offset];
+		return __raw_readw(base + (offset * 1) + 0);
 }
 
 /* Inlines that you should actually use for reading/writing DMA buffers */
-- 
2.20.1

[PATCH 4.4 49/53] net/sonic: Fix receive buffer handling

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 9e311820f67e740f4fb8dcb82b4c4b5b05bdd1a5 ]

The SONIC can sometimes advance its rx buffer pointer (RRP register)
without advancing its rx descriptor pointer (CRDA register). As a result
the index of the current rx descriptor may not equal that of the current
rx buffer. The driver mistakenly assumes that they are always equal.
This assumption leads to incorrect packet lengths and possible packet
duplication. Avoid this by calling a new function to locate the buffer
corresponding to a given descriptor.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/sonic.c | 35 ++++++++++++++++++++++++----
 drivers/net/ethernet/natsemi/sonic.h |  5 ++--
 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 0374e834f865e..21766ec12ef20 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -423,6 +423,21 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/* Return the array index corresponding to a given Receive Buffer pointer. */
+static int index_from_addr(struct sonic_local *lp, dma_addr_t addr,
+			   unsigned int last)
+{
+	unsigned int i = last;
+
+	do {
+		i = (i + 1) & SONIC_RRS_MASK;
+		if (addr == lp->rx_laddr[i])
+			return i;
+	} while (i != last);
+
+	return -ENOENT;
+}
+
 /*
  * We have a good packet(s), pass it/them up the network stack.
  */
@@ -442,6 +457,16 @@ static void sonic_rx(struct net_device *dev)
 
 		status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
 		if (status & SONIC_RCR_PRX) {
+			u32 addr = (sonic_rda_get(dev, entry,
+						  SONIC_RD_PKTPTR_H) << 16) |
+				   sonic_rda_get(dev, entry, SONIC_RD_PKTPTR_L);
+			int i = index_from_addr(lp, addr, entry);
+
+			if (i < 0) {
+				WARN_ONCE(1, "failed to find buffer!\n");
+				break;
+			}
+
 			/* Malloc up new buffer. */
 			new_skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
 			if (new_skb == NULL) {
@@ -463,7 +488,7 @@ static void sonic_rx(struct net_device *dev)
 
 			/* now we have a new skb to replace it, pass the used one up the stack */
 			dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE);
-			used_skb = lp->rx_skb[entry];
+			used_skb = lp->rx_skb[i];
 			pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN);
 			skb_trim(used_skb, pkt_len);
 			used_skb->protocol = eth_type_trans(used_skb, dev);
@@ -472,13 +497,13 @@ static void sonic_rx(struct net_device *dev)
 			lp->stats.rx_bytes += pkt_len;
 
 			/* and insert the new skb */
-			lp->rx_laddr[entry] = new_laddr;
-			lp->rx_skb[entry] = new_skb;
+			lp->rx_laddr[i] = new_laddr;
+			lp->rx_skb[i] = new_skb;
 
 			bufadr_l = (unsigned long)new_laddr & 0xffff;
 			bufadr_h = (unsigned long)new_laddr >> 16;
-			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l);
-			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h);
+			sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+			sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
 		} else {
 			/* This should only happen, if we enable accepting broken packets. */
 			lp->stats.rx_errors++;
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index a009a99c0e544..d9f8ceb5353a4 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -273,8 +273,9 @@
 #define SONIC_NUM_RDS   SONIC_NUM_RRS /* number of receive descriptors */
 #define SONIC_NUM_TDS   16            /* number of transmit descriptors */
 
-#define SONIC_RDS_MASK  (SONIC_NUM_RDS-1)
-#define SONIC_TDS_MASK  (SONIC_NUM_TDS-1)
+#define SONIC_RRS_MASK  (SONIC_NUM_RRS - 1)
+#define SONIC_RDS_MASK  (SONIC_NUM_RDS - 1)
+#define SONIC_TDS_MASK  (SONIC_NUM_TDS - 1)
 
 #define SONIC_RBSIZE	1520          /* size of one resource buffer */
 
-- 
2.20.1

[PATCH 4.4 50/53] net/sonic: Quiesce SONIC before re-initializing descriptor memory

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 3f4b7e6a2be982fd8820a2b54d46dd9c351db899 ]

Make sure the SONIC's DMA engine is idle before altering the transmit
and receive descriptors. Add a helper for this as it will be needed
again.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/sonic.c | 25 +++++++++++++++++++++++++
 drivers/net/ethernet/natsemi/sonic.h |  3 +++
 2 files changed, 28 insertions(+)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 21766ec12ef20..712be59251f51 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -103,6 +103,24 @@ static int sonic_open(struct net_device *dev)
 	return 0;
 }
 
+/* Wait for the SONIC to become idle. */
+static void sonic_quiesce(struct net_device *dev, u16 mask)
+{
+	struct sonic_local * __maybe_unused lp = netdev_priv(dev);
+	int i;
+	u16 bits;
+
+	for (i = 0; i < 1000; ++i) {
+		bits = SONIC_READ(SONIC_CMD) & mask;
+		if (!bits)
+			return;
+		if (irqs_disabled() || in_interrupt())
+			udelay(20);
+		else
+			usleep_range(100, 200);
+	}
+	WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits);
+}
 
 /*
  * Close the SONIC device
@@ -120,6 +138,9 @@ static int sonic_close(struct net_device *dev)
 	/*
 	 * stop the SONIC, disable interrupts
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -159,6 +180,9 @@ static void sonic_tx_timeout(struct net_device *dev)
 	 * put the Sonic into software-reset mode and
 	 * disable all interrupts before releasing DMA buffers
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -638,6 +662,7 @@ static int sonic_init(struct net_device *dev)
 	 */
 	SONIC_WRITE(SONIC_CMD, 0);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
 
 	/*
 	 * initialize the receive resource area
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index d9f8ceb5353a4..7dcf913d7395a 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -109,6 +109,9 @@
 #define SONIC_CR_TXP            0x0002
 #define SONIC_CR_HTX            0x0001
 
+#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \
+		      SONIC_CR_RXEN | SONIC_CR_TXP)
+
 /*
  * SONIC data configuration bits
  */
-- 
2.20.1

[PATCH 4.4 51/53] seq_tab_next() should increase position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 70a87287c821e9721b62463777f55ba588ac4623 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index 129d6095749a4..54d5e53e94af2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -66,8 +66,7 @@ static void *seq_tab_start(struct seq_file *seq, loff_t *pos)
 static void *seq_tab_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	v = seq_tab_get_idx(seq->private, *pos + 1);
-	if (v)
-		++*pos;
+	++(*pos);
 	return v;
 }
 
-- 
2.20.1

[PATCH 4.4 52/53] l2t_seq_next should increase position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 66018a102f7756cf72db4d2704e1b93969d9d332 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/l2t.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index ac27898c6ab0b..e7bdaad6ed0f7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -604,8 +604,7 @@ static void *l2t_seq_start(struct seq_file *seq, loff_t *pos)
 static void *l2t_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	v = l2t_get_idx(seq, *pos);
-	if (v)
-		++*pos;
+	++(*pos);
 	return v;
 }
 
-- 
2.20.1

[PATCH 4.4 53/53] net: Fix skb->csum update in inet_proto_csum_replace16().

[Greg Kroah-Hartman]

From: Praveen Chaudhary <praveen5582@gmail.com>

[ Upstream commit 189c9b1e94539b11c80636bc13e9cf47529e7bba ]

skb->csum is updated incorrectly, when manipulation for
NF_NAT_MANIP_SRC\DST is done on IPV6 packet.

Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(),
because update in two fields a.) IPv6 src/dst address and b.) L4 header
checksum cancels each other for skb->csum calculation. Whereas
inet_proto_csum_replace4 function needs to update skb->csum, because
update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum
and c.) L4 header checksum results in same diff as L4 Header checksum
for skb->csum calculation.

[ pablo@netfilter.org: a few comestic documentation edits ]
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Signed-off-by: Andy Stracner <astracner@linkedin.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/utils.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/net/core/utils.c b/net/core/utils.c
index 3d17ca8b47441..13eb3552de078 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -316,6 +316,23 @@ void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 }
 EXPORT_SYMBOL(inet_proto_csum_replace4);
 
+/**
+ * inet_proto_csum_replace16 - update layer 4 header checksum field
+ * @sum: Layer 4 header checksum field
+ * @skb: sk_buff for the packet
+ * @from: old IPv6 address
+ * @to: new IPv6 address
+ * @pseudohdr: True if layer 4 header checksum includes pseudoheader
+ *
+ * Update layer 4 header as per the update in IPv6 src/dst address.
+ *
+ * There is no need to update skb->csum in this function, because update in two
+ * fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other
+ * for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to
+ * update skb->csum, because update in 3 fields a.) IPv4 src/dst address,
+ * b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as
+ * L4 Header checksum for skb->csum calculation.
+ */
 void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
 			       const __be32 *from, const __be32 *to,
 			       bool pseudohdr)
@@ -327,9 +344,6 @@ void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
 		*sum = csum_fold(csum_partial(diff, sizeof(diff),
 				 ~csum_unfold(*sum)));
-		if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
-			skb->csum = ~csum_partial(diff, sizeof(diff),
-						  ~skb->csum);
 	} else if (pseudohdr)
 		*sum = ~csum_fold(csum_partial(diff, sizeof(diff),
 				  csum_unfold(*sum)));
-- 
2.20.1

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Jon Hunter]

On 03/02/2020 16:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.213 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.213-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.4:
    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    19 tests:	19 pass, 0 fail

Linux version:	4.4.213-rc1-g0d16ce6b7f9f
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

RE: [PATCH 4.4 00/53] 4.4.213-stable review

[Chris Paterson]

Hi Greg,

> From: stable-owner@vger.kernel.org <stable-owner@vger.kernel.org> On
> Behalf Of Greg Kroah-Hartman
> Sent: 03 February 2020 16:19
> 
> This is the start of the stable review cycle for the 4.4.213 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> Anything received after that time might be too late.

We're seeing an issue with 4.4.213-rc1 (36670370c48b) and 4.4.213-rc2 (758a39807529) with our 4 am335x configurations [0]:

   AS      arch/arm/kernel/hyp-stub.o
 arch/arm/kernel/hyp-stub.S:   CC      arch/arm/mach-omap2/sram.o
 Assembler messages:
   AS      arch/arm/kernel/smccc-call.o
 arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode
 scripts/Makefile.build:375: recipe for target 'arch/arm/kernel/hyp-stub.o' failed
 make[1]: *** [arch/arm/kernel/hyp-stub.o] Error 1

The culprit seems to be: 15163bcee7b5 ("ARM: 8955/1: virt: Relax arch timer version check during early boot")
Reverting the same resolves the build issue.

Latest pipeline: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657

[0] https://gitlab.com/cip-project/cip-kernel/cip-kernel-config/-/blob/master/4.4.y-cip/arm/
siemens_am335x-axm2_defconfig, siemens_am335x-draco_defconfig, siemens_am335x-dxr2_defconfig, siemens_am335x-etamin_defconfig


Kind regards, Chris

> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-
> review/patch-4.4.213-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-
> rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 4.4.213-rc1
> 
> Praveen Chaudhary <praveen5582@gmail.com>
>     net: Fix skb->csum update in inet_proto_csum_replace16().
> 
> Vasily Averin <vvs@virtuozzo.com>
>     l2t_seq_next should increase position index
> 
> Vasily Averin <vvs@virtuozzo.com>
>     seq_tab_next() should increase position index
> 
> Finn Thain <fthain@telegraphics.com.au>
>     net/sonic: Quiesce SONIC before re-initializing descriptor memory
> 
> Finn Thain <fthain@telegraphics.com.au>
>     net/sonic: Fix receive buffer handling
> 
> Finn Thain <fthain@telegraphics.com.au>
>     net/sonic: Use MMIO accessors
> 
> Finn Thain <fthain@telegraphics.com.au>
>     net/sonic: Add mutual exclusion for accessing shared state
> 
> Madalin Bucur <madalin.bucur@oss.nxp.com>
>     net/fsl: treat fsl,erratum-a011043
> 
> Manish Chopra <manishc@marvell.com>
>     qlcnic: Fix CPU soft lockup while collecting firmware dump
> 
> Hayes Wang <hayeswang@realtek.com>
>     r8152: get default setting of WOL before initializing
> 
> Michael Ellerman <mpe@ellerman.id.au>
>     airo: Add missing CAP_NET_ADMIN check in
> AIROOLDIOCTL/SIOCDEVPRIVATE
> 
> Michael Ellerman <mpe@ellerman.id.au>
>     airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATE
> 
> Vladimir Murzin <vladimir.murzin@arm.com>
>     ARM: 8955/1: virt: Relax arch timer version check during early boot
> 
> Hannes Reinecke <hare@suse.de>
>     scsi: fnic: do not queue commands during fwreset
> 
> Nicolas Dichtel <nicolas.dichtel@6wind.com>
>     vti[6]: fix packet tx through bpf_redirect()
> 
> Johan Hovold <johan@kernel.org>
>     Input: aiptek - use descriptors of current altsetting
> 
> Arnd Bergmann <arnd@arndb.de>
>     wireless: wext: avoid gcc -O3 warning
> 
> Cambda Zhu <cambda@linux.alibaba.com>
>     ixgbe: Fix calculation of queue with VFs and flow director on interface flap
> 
> Radoslaw Tyl <radoslawx.tyl@intel.com>
>     ixgbevf: Remove limit of 10 entries for unicast filter list
> 
> Lubomir Rintel <lkundrak@v3.sk>
>     clk: mmp2: Fix the order of timer mux parents
> 
> Lee Jones <lee.jones@linaro.org>
>     media: si470x-i2c: Move free() past last use of 'radio'
> 
> Bin Liu <b-liu@ti.com>
>     usb: dwc3: turn off VBUS when leaving host mode
> 
> Zhenzhong Duan <zhenzhong.duan@gmail.com>
>     ttyprintk: fix a potential deadlock in interrupt context issue
> 
> Hans Verkuil <hverkuil-cisco@xs4all.nl>
>     media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0
> 
> Hans Verkuil <hverkuil-cisco@xs4all.nl>
>     media: gspca: zero usb_buf
> 
> Sean Young <sean@mess.org>
>     media: digitv: don't continue if remote control state can't be read
> 
> Jan Kara <jack@suse.cz>
>     reiserfs: Fix memory leak of journal device string
> 
> Dan Carpenter <dan.carpenter@oracle.com>
>     mm/mempolicy.c: fix out of bounds write in mpol_parse_str()
> 
> Dirk Behme <dirk.behme@de.bosch.com>
>     arm64: kbuild: remove compressed images on 'make ARCH=arm64
> (dist)clean'
> 
> Herbert Xu <herbert@gondor.apana.org.au>
>     crypto: pcrypt - Fix user-after-free on module unload
> 
> Al Viro <viro@zeniv.linux.org.uk>
>     vfs: fix do_last() regression
> 
> Herbert Xu <herbert@gondor.apana.org.au>
>     crypto: af_alg - Use bh_lock_sock in sk_destruct
> 
> Eric Dumazet <edumazet@google.com>
>     net_sched: ematch: reject invalid TCF_EM_SIMPLE
> 
> Laura Abbott <labbott@fedoraproject.org>
>     usb-storage: Disable UAS on JMicron SATA enclosure
> 
> Arnd Bergmann <arnd@arndb.de>
>     atm: eni: fix uninitialized variable warning
> 
> Krzysztof Kozlowski <krzk@kernel.org>
>     net: wan: sdla: Fix cast from pointer to integer of different size
> 
> Fenghua Yu <fenghua.yu@intel.com>
>     drivers/net/b44: Change to non-atomic bit operations on pwol_mask
> 
> Andreas Kemnade <andreas@kemnade.info>
>     watchdog: rn5t618_wdt: fix module aliases
> 
> Johan Hovold <johan@kernel.org>
>     zd1211rw: fix storage endpoint lookup
> 
> Johan Hovold <johan@kernel.org>
>     rtl8xxxu: fix interface sanity check
> 
> Johan Hovold <johan@kernel.org>
>     brcmfmac: fix interface sanity check
> 
> Johan Hovold <johan@kernel.org>
>     ath9k: fix storage endpoint lookup
> 
> Malcolm Priestley <tvboxspy@gmail.com>
>     staging: vt6656: Fix false Tx excessive retries reporting.
> 
> Malcolm Priestley <tvboxspy@gmail.com>
>     staging: vt6656: use NULLFUCTION stack on mac80211
> 
> Malcolm Priestley <tvboxspy@gmail.com>
>     staging: vt6656: correct packet types for CTS protect, mode.
> 
> Colin Ian King <colin.king@canonical.com>
>     staging: wlan-ng: ensure error return is actually returned
> 
> Andrey Shvetsov <andrey.shvetsov@k2l.de>
>     staging: most: net: fix buffer overflow
> 
> Johan Hovold <johan@kernel.org>
>     USB: serial: ir-usb: fix IrLAP framing
> 
> Johan Hovold <johan@kernel.org>
>     USB: serial: ir-usb: fix link-speed handling
> 
> Johan Hovold <johan@kernel.org>
>     USB: serial: ir-usb: add missing endpoint sanity check
> 
> Johan Hovold <johan@kernel.org>
>     rsi_91x_usb: fix interface sanity check
> 
> Johan Hovold <johan@kernel.org>
>     orinoco_usb: fix interface sanity check
> 
> Takashi Iwai <tiwai@suse.de>
>     ALSA: pcm: Add missing copy ops check before clearing buffer
> 
> 
> -------------
> 
> Diffstat:
> 
>  Makefile                                           |   4 +-
>  arch/arm/kernel/hyp-stub.S                         |   7 +-
>  arch/arm64/boot/Makefile                           |   2 +-
>  crypto/af_alg.c                                    |   6 +-
>  crypto/pcrypt.c                                    |   3 +-
>  drivers/atm/eni.c                                  |   4 +-
>  drivers/char/ttyprintk.c                           |  15 ++-
>  drivers/clk/mmp/clk-of-mmp2.c                      |   2 +-
>  drivers/input/tablet/aiptek.c                      |   2 +-
>  drivers/media/radio/si470x/radio-si470x-i2c.c      |   2 +-
>  drivers/media/usb/dvb-usb/digitv.c                 |  10 +-
>  drivers/media/usb/dvb-usb/dvb-usb-urb.c            |   2 +-
>  drivers/media/usb/gspca/gspca.c                    |   2 +-
>  drivers/net/ethernet/broadcom/b44.c                |   9 +-
>  drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c |   3 +-
>  drivers/net/ethernet/chelsio/cxgb4/l2t.c           |   3 +-
>  drivers/net/ethernet/freescale/xgmac_mdio.c        |   7 +-
>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |  37 ++++--
>  drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  |   5 -
>  drivers/net/ethernet/natsemi/sonic.c               | 109 ++++++++++++++---
>  drivers/net/ethernet/natsemi/sonic.h               |  25 ++--
>  .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  |   1 +
>  .../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c   |   2 +
>  drivers/net/usb/r8152.c                            |   9 +-
>  drivers/net/wan/sdla.c                             |   2 +-
>  drivers/net/wireless/airo.c                        |  20 ++-
>  drivers/net/wireless/ath/ath9k/hif_usb.c           |   2 +-
>  drivers/net/wireless/brcm80211/brcmfmac/usb.c      |   4 +-
>  drivers/net/wireless/orinoco/orinoco_usb.c         |   4 +-
>  drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c   |   2 +-
>  drivers/net/wireless/rsi/rsi_91x_usb.c             |   2 +-
>  drivers/net/wireless/zd1211rw/zd_usb.c             |   2 +-
>  drivers/scsi/fnic/fnic_scsi.c                      |   3 +
>  drivers/staging/most/aim-network/networking.c      |  10 ++
>  drivers/staging/vt6656/device.h                    |   2 +
>  drivers/staging/vt6656/int.c                       |   6 +-
>  drivers/staging/vt6656/main_usb.c                  |   1 +
>  drivers/staging/vt6656/rxtx.c                      |  26 ++--
>  drivers/staging/wlan-ng/prism2mgmt.c               |   2 +-
>  drivers/usb/dwc3/core.c                            |   3 +
>  drivers/usb/serial/ir-usb.c                        | 136 ++++++++++++++++-----
>  drivers/usb/storage/unusual_uas.h                  |   7 +-
>  drivers/watchdog/rn5t618_wdt.c                     |   1 +
>  fs/namei.c                                         |   4 +-
>  fs/reiserfs/super.c                                |   2 +
>  include/linux/usb/irda.h                           |  13 +-
>  mm/mempolicy.c                                     |   6 +-
>  net/core/utils.c                                   |  20 ++-
>  net/ipv4/ip_vti.c                                  |  13 +-
>  net/ipv6/ip6_vti.c                                 |  13 +-
>  net/sched/ematch.c                                 |   3 +
>  net/wireless/wext-core.c                           |   3 +-
>  sound/core/pcm_native.c                            |   2 +-
>  53 files changed, 418 insertions(+), 167 deletions(-)
> 

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2100 bytes --]

Hi!

> > From: stable-owner@vger.kernel.org <stable-owner@vger.kernel.org> On
> > Behalf Of Greg Kroah-Hartman
> > Sent: 03 February 2020 16:19
> > 
> > This is the start of the stable review cycle for the 4.4.213 release.
> > There are 53 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> > Anything received after that time might be too late.
> 
> We're seeing an issue with 4.4.213-rc1 (36670370c48b) and 4.4.213-rc2 (758a39807529) with our 4 am335x configurations [0]:
> 
>    AS      arch/arm/kernel/hyp-stub.o
>  arch/arm/kernel/hyp-stub.S:   CC      arch/arm/mach-omap2/sram.o
>  Assembler messages:
>    AS      arch/arm/kernel/smccc-call.o
>  arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode
>  scripts/Makefile.build:375: recipe for target 'arch/arm/kernel/hyp-stub.o' failed
>  make[1]: *** [arch/arm/kernel/hyp-stub.o] Error 1
> 
> The culprit seems to be: 15163bcee7b5 ("ARM: 8955/1: virt: Relax arch timer version check during early boot")
> Reverting the same resolves the build issue.
> 
> Latest pipeline: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657
> 
> [0] https://gitlab.com/cip-project/cip-kernel/cip-kernel-config/-/blob/master/4.4.y-cip/arm/
> siemens_am335x-axm2_defconfig, siemens_am335x-draco_defconfig, siemens_am335x-dxr2_defconfig, siemens_am335x-etamin_defconfig
> 

For the record, build results are here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657

4.19.102 builds okay:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683672

but that's probably because siemens_am335x* configurations are not
tested in 4.19.X case.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Greg Kroah-Hartman]

On Tue, Feb 04, 2020 at 09:50:56AM +0000, Chris Paterson wrote:
> Hi Greg,
> 
> > From: stable-owner@vger.kernel.org <stable-owner@vger.kernel.org> On
> > Behalf Of Greg Kroah-Hartman
> > Sent: 03 February 2020 16:19
> > 
> > This is the start of the stable review cycle for the 4.4.213 release.
> > There are 53 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> > Anything received after that time might be too late.
> 
> We're seeing an issue with 4.4.213-rc1 (36670370c48b) and 4.4.213-rc2 (758a39807529) with our 4 am335x configurations [0]:
> 
>    AS      arch/arm/kernel/hyp-stub.o
>  arch/arm/kernel/hyp-stub.S:   CC      arch/arm/mach-omap2/sram.o
>  Assembler messages:
>    AS      arch/arm/kernel/smccc-call.o
>  arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode
>  scripts/Makefile.build:375: recipe for target 'arch/arm/kernel/hyp-stub.o' failed
>  make[1]: *** [arch/arm/kernel/hyp-stub.o] Error 1
> 
> The culprit seems to be: 15163bcee7b5 ("ARM: 8955/1: virt: Relax arch timer version check during early boot")
> Reverting the same resolves the build issue.
> 
> Latest pipeline: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657
> 
> [0] https://gitlab.com/cip-project/cip-kernel/cip-kernel-config/-/blob/master/4.4.y-cip/arm/
> siemens_am335x-axm2_defconfig, siemens_am335x-draco_defconfig, siemens_am335x-dxr2_defconfig, siemens_am335x-etamin_defconfig

Thanks, I'll go drop that patch from 4.4 and 4.9 trees.

greg k-h

Re: [cip-dev] [PATCH 4.4 00/53] 4.4.213-stable review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2154 bytes --]

On Wed 2020-02-05 13:02:07, Greg Kroah-Hartman wrote:
> On Tue, Feb 04, 2020 at 09:50:56AM +0000, Chris Paterson wrote:
> > Hi Greg,
> > 
> > > From: stable-owner@vger.kernel.org <stable-owner@vger.kernel.org> On
> > > Behalf Of Greg Kroah-Hartman
> > > Sent: 03 February 2020 16:19
> > > 
> > > This is the start of the stable review cycle for the 4.4.213 release.
> > > There are 53 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> > > Anything received after that time might be too late.
> > 
> > We're seeing an issue with 4.4.213-rc1 (36670370c48b) and 4.4.213-rc2 (758a39807529) with our 4 am335x configurations [0]:
> > 
> >    AS      arch/arm/kernel/hyp-stub.o
> >  arch/arm/kernel/hyp-stub.S:   CC      arch/arm/mach-omap2/sram.o
> >  Assembler messages:
> >    AS      arch/arm/kernel/smccc-call.o
> >  arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode
> >  scripts/Makefile.build:375: recipe for target 'arch/arm/kernel/hyp-stub.o' failed
> >  make[1]: *** [arch/arm/kernel/hyp-stub.o] Error 1
> > 
> > The culprit seems to be: 15163bcee7b5 ("ARM: 8955/1: virt: Relax arch timer version check during early boot")
> > Reverting the same resolves the build issue.
> > 
> > Latest pipeline: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657
> > 
> > [0] https://gitlab.com/cip-project/cip-kernel/cip-kernel-config/-/blob/master/4.4.y-cip/arm/
> > siemens_am335x-axm2_defconfig, siemens_am335x-draco_defconfig, siemens_am335x-dxr2_defconfig, siemens_am335x-etamin_defconfig
> 
> Thanks, I'll go drop that patch from 4.4 and 4.9 trees.

I believe it is more likely than not to break 4.19 (and possibly
mainline), too, but I have not yet done required testing.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Guenter Roeck]

On 2/3/20 8:18 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.213 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> Anything received after that time might be too late.
> 

arm:{allmodconfig, omap2plus_defconfig, imx_v6_v7_defconfig}"

arch/arm/kernel/hyp-stub.S: Assembler messages:
arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode

Guenter

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Greg Kroah-Hartman]

On Tue, Feb 04, 2020 at 06:43:58AM -0800, Guenter Roeck wrote:
> On 2/3/20 8:18 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.213 release.
> > There are 53 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> > Anything received after that time might be too late.
> > 
> 
> arm:{allmodconfig, omap2plus_defconfig, imx_v6_v7_defconfig}"
> 
> arch/arm/kernel/hyp-stub.S: Assembler messages:
> arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode

Thanks, have now dropped the offending patch.

greg k-h

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Guenter Roeck]

On Mon, Feb 03, 2020 at 04:18:52PM +0000, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.213 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 170 pass: 167 fail: 3
Failed builds:
	arm:allmodconfig
	arm:omap2plus_defconfig
	arm:imx_v6_v7_defconfig
Qemu test results:
	total: 325 pass: 322 fail: 3
Failed tests:
	arm:kzm:imx_v6_v7_defconfig:nodrm:mem128:initrd
	arm:mcimx6ul-evk:imx_v6_v7_defconfig:nodrm:mem256:imx6ul-14x14-evk:initrd
	arm:mcimx6ul-evk:imx_v6_v7_defconfig:nodrm:sd:mem256:imx6ul-14x14-evk:rootfs

Errors as already reported.

Guenter

Re: [PATCH 4.4 00/53] 4.4.213-stable review

[Naresh Kamboju]

On Mon, 3 Feb 2020 at 21:51, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.4.213 release.
> There are 53 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.213-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.213-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 758a39807529795c804023beb3dd12d9494760cf
git describe: v4.4.212-56-g758a39807529
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.212-56-g758a39807529


No regressions (compared to build v4.4.212)


No fixes (compared to build v4.4.212)

Ran 4894 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* kselftest
* kvm-unit-tests
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

Summary
------------------------------------------------------------------------

kernel: 4.4.208-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.208-rc1-hikey-20200101-645
git commit: 45aaddb4efb9c8a83ada6caeb9594f7fc5130ec3
git describe: 4.4.208-rc1-hikey-20200101-645
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.208-rc1-hikey-20200101-645


No regressions (compared to build 4.4.208-rc1-hikey-20200101-644)


No fixes (compared to build 4.4.208-rc1-hikey-20200101-644)

Ran 1568 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

-- 
Linaro LKFT
https://lkft.linaro.org