[PATCH v2 0/9] arm64: dts: librem5-devkit: description updates

[PATCH v2 0/9] arm64: dts: librem5-devkit: description updates

[Martin Kepplinger]

These are additions to the imx8mq-librem5-devkit devicetree description
we are running for quite some time. All users should have them:

revision history
----------------
v2: review by Shawn and Guido: remove a battery description
    add SoB tags, coding style fixes, squash and reorder audio
    descritions, remove redundant and unneeded changes.
v1: https://lore.kernel.org/linux-arm-kernel/20200205143003.28408-1-martin.kepplinger@puri.sm/

Angus Ainslie (Purism) (8):
  arm64: dts: librem5-devkit: add sai2 and sai6 pinctrl definitions
  arm64: dts: librem5-devkit: enable sai2 and sai6 audio interface
  arm64: dts: librem5-devkit: add the simcom 7100 modem and sgtl5000
    audio codec
  arm64: dts: librem5-devkit: allow modem to wake the system from
    suspend
  arm64: dts: librem5-devkit: add a vbus supply to usb0
  arm64: dts: librem5-devkit: add the regulators for DVFS
  arm64: dts: librem5-devkit: allow the redpine card to be removed
  arm64: dts: librem5-devkit: increase the VBUS current in the kernel

Martin Kepplinger (1):
  arm64: dts: librem5-devkit: add lsm9ds1 mount matrix

 .../dts/freescale/imx8mq-librem5-devkit.dts   | 134 +++++++++++++++++-
 1 file changed, 131 insertions(+), 3 deletions(-)

-- 
2.20.1

[PATCH v2 1/9] arm64: dts: librem5-devkit: add sai2 and sai6 pinctrl definitions

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Add missing sai2 and sai6 audio interface pinctrl definitions for the
Librem 5 devkit.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 007c14eec676..1e9fa80be647 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -567,6 +567,25 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
-- 
2.20.1

Re: [PATCH v2 1/9] arm64: dts: librem5-devkit: add sai2 and sai6 pinctrl definitions

[Shawn Guo]

On Tue, Feb 18, 2020 at 09:49:34AM +0100, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@akkea.ca>
> 
> Add missing sai2 and sai6 audio interface pinctrl definitions for the
> Librem 5 devkit.
> 
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

We do not need to be so verbose.  It can be squashed into patch #2.

Shawn

> ---
>  .../dts/freescale/imx8mq-librem5-devkit.dts   | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 007c14eec676..1e9fa80be647 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -567,6 +567,25 @@
>  		>;
>  	};
>  
> +	pinctrl_sai2: sai2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
> +			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
> +			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
> +			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
> +			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
> +		>;
> +	};
> +
> +	pinctrl_sai6: sai6grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
> +			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
> +			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
> +			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
> +		>;
> +	};
> +
>  	pinctrl_typec: typecgrp {
>  		fsl,pins = <
>  			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
> -- 
> 2.20.1
> 

[PATCH v2 2/9] arm64: dts: librem5-devkit: enable sai2 and sai6 audio interface

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

enable the imx8mq sai2 and sai6 audio interface for the librem 5 devkit.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 1e9fa80be647..25135b08d4f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -761,6 +761,25 @@
 	status = "okay";
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
 &uart1 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.20.1

[PATCH v2 3/9] arm64: dts: librem5-devkit: add the simcom 7100 modem and sgtl5000 audio codec

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Add the simcomm modem and the sgtl5000 audio codec.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 25135b08d4f8..ec12477d925d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -148,6 +148,53 @@
 		regulator-always-on;
 	};
 
+	wwan_codec: sound-wwan-codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SIMCom SIM7100";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&wwan_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		pinctrl-names = "default";
@@ -426,6 +473,19 @@
 		vddio-supply = <&reg_3v3_p>;
 	};
 
+	audio_codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDD-supply = <&reg_1v8_p>;
+		VDDIO-supply = <&reg_3v3_p>;
+		VDDA-supply = <&reg_3v3_p>;
+	};
+
 	touchscreen@5d {
 		compatible = "goodix,gt5688";
 		reg = <0x5d>;
-- 
2.20.1

Re: [PATCH v2 3/9] arm64: dts: librem5-devkit: add the simcom 7100 modem and sgtl5000 audio codec

[Shawn Guo]

On Tue, Feb 18, 2020 at 09:49:36AM +0100, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@akkea.ca>
> 
> Add the simcomm modem and the sgtl5000 audio codec.
> 
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../dts/freescale/imx8mq-librem5-devkit.dts   | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 25135b08d4f8..ec12477d925d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -148,6 +148,53 @@
>  		regulator-always-on;
>  	};
>  
> +	wwan_codec: sound-wwan-codec {
> +		compatible = "option,gtm601";
> +		#sound-dai-cells = <0>;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "sgtl5000";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,widgets =
> +			"Microphone", "Microphone Jack",
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "Speaker Ext",
> +			"Line", "Line In Jack";
> +		simple-audio-card,routing =
> +			"MIC_IN", "Microphone Jack",
> +			"Microphone Jack", "Mic Bias",
> +			"LINE_IN", "Line In Jack",
> +			"Headphone Jack", "HP_OUT",
> +			"Speaker Ext", "LINE_OUT";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai2>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&audio_codec>;
> +			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> +			frame-master;
> +			bitclock-master;
> +		};
> +	};
> +
> +	sound-wwan {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "SIMCom SIM7100";
> +		simple-audio-card,format = "dsp_a";

newline

> +		simple-audio-card,cpu {
> +			sound-dai = <&sai6>;
> +		};

newline

> +		telephony_link_master: simple-audio-card,codec {
> +			sound-dai = <&wwan_codec>;
> +			frame-master;
> +			bitclock-master;
> +		};
> +	};
> +
>  	vibrator {
>  		compatible = "gpio-vibrator";
>  		pinctrl-names = "default";
> @@ -426,6 +473,19 @@
>  		vddio-supply = <&reg_3v3_p>;
>  	};
>  
> +	audio_codec: sgtl5000@a {

Node name needs to be generic, not the label name.  So it should be:

	sgtl5000: audio-codec@a {

Shawn

> +		compatible = "fsl,sgtl5000";
> +		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> +		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
> +		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
> +		assigned-clock-rates = <24576000>;
> +		#sound-dai-cells = <0>;
> +		reg = <0x0a>;
> +		VDDD-supply = <&reg_1v8_p>;
> +		VDDIO-supply = <&reg_3v3_p>;
> +		VDDA-supply = <&reg_3v3_p>;
> +	};
> +
>  	touchscreen@5d {
>  		compatible = "goodix,gt5688";
>  		reg = <0x5d>;
> -- 
> 2.20.1
> 

[PATCH v2 4/9] arm64: dts: librem5-devkit: allow modem to wake the system from suspend

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Connect the WoWWAN signal to a gpio key to wake up the system from suspend.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index ec12477d925d..9c81b07f43f3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -55,6 +55,15 @@
 			wakeup-source;
 			linux,code = <KEY_HP>;
 		};
+
+		wwan_wake {
+			label = "WWAN_WAKE";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_PHONE>;
+		};
 	};
 
 	leds {
@@ -574,6 +583,7 @@
 			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
 			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
 			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x180  /* HP_DET */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
 		>;
 	};
 
-- 
2.20.1

Re: [PATCH v2 4/9] arm64: dts: librem5-devkit: allow modem to wake the system from suspend

[Shawn Guo]

On Tue, Feb 18, 2020 at 09:49:37AM +0100, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@akkea.ca>
> 
> Connect the WoWWAN signal to a gpio key to wake up the system from suspend.
> 
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index ec12477d925d..9c81b07f43f3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -55,6 +55,15 @@
>  			wakeup-source;
>  			linux,code = <KEY_HP>;
>  		};
> +
> +		wwan_wake {

We prefer to use hyphen over underscore in node name.

Shawn

> +			label = "WWAN_WAKE";
> +			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
> +			interrupt-parent = <&gpio3>;
> +			interrupts = <8 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +			linux,code = <KEY_PHONE>;
> +		};
>  	};
>  
>  	leds {
> @@ -574,6 +583,7 @@
>  			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
>  			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
>  			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x180  /* HP_DET */
> +			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
>  		>;
>  	};
>  
> -- 
> 2.20.1
> 

[PATCH v2 5/9] arm64: dts: librem5-devkit: add a vbus supply to usb0

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Without a VBUS supply the dwc3 driver won't go into otg mode.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Sigend-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 9c81b07f43f3..acd68e8fb43e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -870,6 +870,7 @@
 };
 
 &usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
 	status = "okay";
 };
 
-- 
2.20.1

[PATCH v2 6/9] arm64: dts: librem5-devkit: add the regulators for DVFS

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Specify which regulator is used for cpufreq DVFS.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index acd68e8fb43e..74d403c00f15 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -225,6 +225,22 @@
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &clk {
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
 	assigned-clock-rates = <786432000>, <722534400>;
-- 
2.20.1

[PATCH v2 7/9] arm64: dts: librem5-devkit: allow the redpine card to be removed

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

By adding broken-cd to the usdhc2 stanza the Redpine card can be
detected when the HKS is turned off and on.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 74d403c00f15..8071e6a34604 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -945,7 +945,7 @@
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	power-supply = <&wifi_pwr_en>;
-	non-removable;
+	broken-cd;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-- 
2.20.1

[PATCH v2 8/9] arm64: dts: librem5-devkit: increase the VBUS current in the kernel

[Martin Kepplinger]

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

The poly fuses can handle 6V 4Amps so incease the kernel limts to 5V
3.5Amps.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 8071e6a34604..4cb11ed17c24 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -426,10 +426,10 @@
 				PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )>;
-			sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+			sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )
-			     PDO_VAR(5000, 3000, 3000)>;
+			     PDO_VAR(5000, 5000, 3500)>;
 			op-sink-microwatt = <10000000>;
 
 			ports {
-- 
2.20.1

[PATCH v2 9/9] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix

[Martin Kepplinger]

The IMU chip on the librem5-devkit is not mounted at the "natural" place
that would match normal phone orientation (see the documentation for the
details about what that is).

Since the lsm9ds1 driver supports providing a mount matrix, we can describe
the orientation on the board in the dts:

Create a right-handed coordinate system (x * -1; see the datasheet for the
axis) and rotate 180 degrees around the y axis because the device sits on
the back side from the display.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 4cb11ed17c24..19ca3b4f802f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -537,6 +537,9 @@
 		reg = <0x6a>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
+		mount-matrix =  "1",  "0",  "0",
+				"0",  "1",  "0",
+				"0",  "0", "-1";
 	};
 };
 
-- 
2.20.1