From: Vadym Kochan <vadym.kochan@plvision.eu>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"David S . Miller" <davem@davemloft.net>
Cc: Vadym Kochan <vadym.kochan@plvision.eu>,
Oleksandr Mazur <oleksandr.mazur@plvision.eu>,
Taras Chornyi <taras.chornyi@plvision.eu>,
Serhiy Boiko <serhiy.boiko@plvision.eu>,
Andrii Savka <andrii.savka@plvision.eu>,
Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Subject: [RFC net-next 0/3] net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX326x (AC3x)
Date: Tue, 25 Feb 2020 16:30:52 +0000 [thread overview]
Message-ID: <20200225163025.9430-1-vadym.kochan@plvision.eu> (raw)
Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8
ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely
wireless SMB deployment.
Prestera Switchdev is a firmware based driver which operates via PCI
bus. The driver is split into 2 modules:
- prestera_sw.ko - main generic Switchdev Prestera ASIC related logic.
- prestera_pci.ko - bus specific code which also implements firmware
loading and low-level messaging protocol between
firmware and the switchdev driver.
This driver implementation includes only L1 & basic L2 support.
The core Prestera switching logic is implemented in prestera.c, there is
an intermediate hw layer between core logic and firmware. It is
implemented in prestera_hw.c, the purpose of it is to encapsulate hw
related logic, in future there is a plan to support more devices with
different HW related configurations.
The firmware has to be loaded each time device is reset. The driver is
loading it from:
/lib/firmware/marvell/prestera_fw_img.bin
The firmware image version is located within internal header and consists
of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has hard-coded
minimum supported firmware version which it can work with:
MAJOR - reflects the support on ABI level between driver and loaded
firmware, this number should be the same for driver and
loaded firmware.
MINOR - this is the minimal supported version between driver and the
firmware.
PATCH - indicates only fixes, firmware ABI is not changed.
The firmware image will be submitted to the linux-firmware after the
driver is accepted.
The following Switchdev features are supported:
- VLAN-aware bridge offloading
- VLAN-unaware bridge offloading
- FDB offloading (learning, ageing)
- Switchport configuration
CPU RX/TX support will be provided in the next contribution.
Vadym Kochan (3):
net: marvell: prestera: Add Switchdev driver for Prestera family ASIC
device 98DX325x (AC3x)
net: marvell: prestera: Add PCI interface support
dt-bindings: marvell,prestera: Add address mapping for Prestera
Switchdev PCIe driver
.../bindings/net/marvell,prestera.txt | 13 +
drivers/net/ethernet/marvell/Kconfig | 1 +
drivers/net/ethernet/marvell/Makefile | 1 +
drivers/net/ethernet/marvell/prestera/Kconfig | 24 +
.../net/ethernet/marvell/prestera/Makefile | 5 +
.../net/ethernet/marvell/prestera/prestera.c | 1502 +++++++++++++++++
.../net/ethernet/marvell/prestera/prestera.h | 244 +++
.../marvell/prestera/prestera_drv_ver.h | 23 +
.../ethernet/marvell/prestera/prestera_hw.c | 1094 ++++++++++++
.../ethernet/marvell/prestera/prestera_hw.h | 159 ++
.../ethernet/marvell/prestera/prestera_pci.c | 840 +++++++++
.../marvell/prestera/prestera_switchdev.c | 1217 +++++++++++++
12 files changed, 5123 insertions(+)
create mode 100644 drivers/net/ethernet/marvell/prestera/Kconfig
create mode 100644 drivers/net/ethernet/marvell/prestera/Makefile
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera.c
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera.h
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_drv_ver.h
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_hw.c
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_hw.h
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_pci.c
create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_switchdev.c
--
2.17.1
next reply other threads:[~2020-02-25 16:31 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 16:30 Vadym Kochan [this message]
2020-02-25 16:30 ` [RFC net-next 1/3] net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX325x (AC3x) Vadym Kochan
2020-02-25 22:05 ` Andrew Lunn
2020-02-26 15:54 ` Jiri Pirko
2020-02-27 21:32 ` Vadym Kochan
2020-02-27 21:43 ` Andrew Lunn
2020-02-27 23:50 ` Vadym Kochan
2020-02-28 6:36 ` Jiri Pirko
2020-02-28 14:03 ` Andrew Lunn
2020-02-28 6:34 ` Jiri Pirko
2020-02-28 9:44 ` Vadym Kochan
2020-02-28 10:59 ` Jiri Pirko
2020-02-27 14:22 ` Jiri Pirko
2020-02-28 8:06 ` Vadym Kochan
2020-02-28 11:03 ` Jiri Pirko
2020-02-28 4:22 ` Florian Fainelli
2020-02-28 8:17 ` Vadym Kochan
2020-03-05 14:49 ` Ido Schimmel
2020-05-02 15:20 ` Vadym Kochan
2020-05-05 4:01 ` Vadym Kochan
2020-02-25 16:30 ` [RFC net-next 2/3] net: marvell: prestera: Add PCI interface support Vadym Kochan
2020-02-25 20:49 ` Andrew Lunn
2020-02-27 11:05 ` Jiri Pirko
2020-02-28 16:54 ` Vadym Kochan
2020-02-29 7:58 ` Jiri Pirko
2020-03-01 2:12 ` Jakub Kicinski
2020-02-25 16:30 ` [RFC net-next 3/3] dt-bindings: marvell,prestera: Add address mapping for Prestera Switchdev PCIe driver Vadym Kochan
2020-02-28 4:24 ` Florian Fainelli
2020-02-25 22:12 ` [RFC net-next 0/3] net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX326x (AC3x) Andrew Lunn
2020-02-25 22:45 ` Chris Packham
2020-02-28 16:50 ` Vadym Kochan
2020-02-26 15:44 ` Jiri Pirko
2020-02-26 16:38 ` Roopa Prabhu
2020-03-05 15:01 ` Ido Schimmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225163025.9430-1-vadym.kochan@plvision.eu \
--to=vadym.kochan@plvision.eu \
--cc=andrii.savka@plvision.eu \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oleksandr.mazur@plvision.eu \
--cc=serhiy.boiko@plvision.eu \
--cc=taras.chornyi@plvision.eu \
--cc=volodymyr.mytnyk@plvision.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).