* [PATCH 02/22] dt-bindings: Add MIPS CPC controller as a trivial devices
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 03/22] dt-bindings: Add MIPS CDMM controller as a trivial device Sergey.Semin
` (5 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Paul Burton, Rob Herring, Mark Rutland
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Ralf Baechle, linux-mips, devicetree, linux-kernel
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
It's a Cluster Power Controller embedded into the MIPS IP cores.
Currently the corresponding dts node is supposed to have a compatible
and regs properties. There is no need in the text-based mti,mips-cpc
bindings file from now. So it can be removed.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 --------
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
2 files changed, 2 insertions(+), 8 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
deleted file mode 100644
index c6b82511ae8a..000000000000
--- a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Binding for MIPS Cluster Power Controller (CPC).
-
-This binding allows a system to specify where the CPC registers are
-located.
-
-Required properties:
-compatible : Should be "mti,mips-cpc".
-regs: Should describe the address & size of the CPC register region.
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index ce0149b4b6ed..b6b6f3181fd8 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -304,6 +304,8 @@ properties:
- miramems,da280
# MiraMEMS DA311 3-axis 12-bit digital accelerometer
- miramems,da311
+ # MIPS Cluster Power Controller (CPC)
+ - mti,mips-cpc
# Temperature sensor with integrated fan control
- national,lm63
# I2C TEMP SENSOR
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 03/22] dt-bindings: Add MIPS CDMM controller as a trivial device
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
2020-03-06 12:08 ` [PATCH 02/22] dt-bindings: Add MIPS CPC controller as a trivial devices Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 04/22] dt-bindings: Add vendor prefix for Baikal Electronics, JSC Sergey.Semin
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Paul Burton, Ralf Baechle, devicetree, linux-kernel
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
It's a Common Device Memory Map controller embedded into the MIPS IP
cores. The corresponding dts node is supposed to have a compatible
and regs properties. So add the device to the trivial-devices bindings
file.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index b6b6f3181fd8..370b8c6631fc 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -304,6 +304,8 @@ properties:
- miramems,da280
# MiraMEMS DA311 3-axis 12-bit digital accelerometer
- miramems,da311
+ # MIPS Common Device Memory Map block (CDMM)
+ - mti,mips-cdmm
# MIPS Cluster Power Controller (CPC)
- mti,mips-cpc
# Temperature sensor with integrated fan control
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 04/22] dt-bindings: Add vendor prefix for Baikal Electronics, JSC
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
2020-03-06 12:08 ` [PATCH 02/22] dt-bindings: Add MIPS CPC controller as a trivial devices Sergey.Semin
2020-03-06 12:08 ` [PATCH 03/22] dt-bindings: Add MIPS CDMM controller as a trivial device Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 06/22] mips: cm: Add L2 ECC/parity errors reporting Sergey.Semin
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Serge Semin, Serge Semin, Alexey Malahov, Thomas Bogendoerfer,
Paul Burton, Ralf Baechle, devicetree, linux-kernel
From: Serge Semin <fancer.lancer@gmail.com>
Add "BAIKAL ELECTRONICS, JSC" to the list of devicetree vendor prefixes
as "be".
Website: http://www.baikalelectronics.com
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9e67944bec9c..8568713396af 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -141,6 +141,8 @@ patternProperties:
description: Shenzhen AZW Technology Co., Ltd.
"^bananapi,.*":
description: BIPAI KEJI LIMITED
+ "^be,.*":
+ description: BAIKAL ELECTRONICS, JSC
"^bhf,.*":
description: Beckhoff Automation GmbH & Co. KG
"^bitmain,.*":
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 06/22] mips: cm: Add L2 ECC/parity errors reporting
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
` (2 preceding siblings ...)
2020-03-06 12:08 ` [PATCH 04/22] dt-bindings: Add vendor prefix for Baikal Electronics, JSC Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 07/22] mips: Add MIPS32 Release 5 support Sergey.Semin
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, Alexey Malahov, Paul Burton,
Ralf Baechle, linux-mips, linux-kernel
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
According to the MIPS32 InterAptiv software manual error codes 24 - 26
of CM2 indicate L2 ECC/parity error with switching to a corresponding
errors info fields. This patch provides these errors parsing code,
which handles the read/write uncorrectable and correctable ECC/parity
errors, and prints instruction causing the fault, RAM array type, cache
way/dword and syndrome associated with the faulty data.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/mips-cm.c | 62 ++++++++++++++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 361bfc91a0e6..f60af512c877 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -114,6 +114,48 @@ static char *cm2_core[8] = {
"Exclusive/OK", "Exclusive/Data"
};
+static char *cm2_l2_type[4] = {
+ [0x0] = "None",
+ [0x1] = "Tag RAM single/double ECC error",
+ [0x2] = "Data RAM single/double ECC error",
+ [0x3] = "WS RAM uncorrectable dirty parity"
+};
+
+static char *cm2_l2_instr[32] = {
+ [0x00] = "L2_NOP",
+ [0x01] = "L2_ERR_CORR",
+ [0x02] = "L2_TAG_INV",
+ [0x03] = "L2_WS_CLEAN",
+ [0x04] = "L2_RD_MDYFY_WR",
+ [0x05] = "L2_WS_MRU",
+ [0x06] = "L2_EVICT_LN2",
+ [0x07] = "0x07",
+ [0x08] = "L2_EVICT",
+ [0x09] = "L2_REFL",
+ [0x0a] = "L2_RD",
+ [0x0b] = "L2_WR",
+ [0x0c] = "L2_EVICT_MRU",
+ [0x0d] = "L2_SYNC",
+ [0x0e] = "L2_REFL_ERR",
+ [0x0f] = "0x0f",
+ [0x10] = "L2_INDX_WB_INV",
+ [0x11] = "L2_INDX_LD_TAG",
+ [0x12] = "L2_INDX_ST_TAG",
+ [0x13] = "L2_INDX_ST_DATA",
+ [0x14] = "L2_INDX_ST_ECC",
+ [0x15] = "0x15",
+ [0x16] = "0x16",
+ [0x17] = "0x17",
+ [0x18] = "L2_FTCH_AND_LCK",
+ [0x19] = "L2_HIT_INV",
+ [0x1a] = "L2_HIT_WB_INV",
+ [0x1b] = "L2_HIT_WB",
+ [0x1c] = "0x1c",
+ [0x1d] = "0x1d",
+ [0x1e] = "0x1e",
+ [0x1f] = "0x1f"
+};
+
static char *cm2_causes[32] = {
"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
@@ -121,7 +163,7 @@ static char *cm2_causes[32] = {
"0x0c", "0x0d", "0x0e", "0x0f",
"0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
"0x14", "0x15", "0x16", "0x17",
- "0x18", "0x19", "0x1a", "0x1b",
+ "L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b",
"0x1c", "0x1d", "0x1e", "0x1f"
};
@@ -360,7 +402,7 @@ void mips_cm_error_report(void)
"CCA=%lu TR=%s MCmd=%s STag=%lu "
"SPort=%lu\n", cca_bits, cm2_tr[tr_bits],
cm2_cmd[cmd_bits], stag_bits, sport_bits);
- } else {
+ } else if (cause < 24) {
/* glob state & sresp together */
unsigned long c3_bits = (cm_error >> 18) & 7;
unsigned long c2_bits = (cm_error >> 15) & 7;
@@ -377,6 +419,22 @@ void mips_cm_error_report(void)
cm2_core[c1_bits], cm2_core[c0_bits],
sc_bit ? "True" : "False",
cm2_cmd[cmd_bits], sport_bits);
+ } else {
+ unsigned long muc_bit = (cm_error >> 23) & 1;
+ unsigned long ins_bits = (cm_error >> 18) & 0x1f;
+ unsigned long arr_bits = (cm_error >> 16) & 3;
+ unsigned long dw_bits = (cm_error >> 12) & 15;
+ unsigned long way_bits = (cm_error >> 9) & 7;
+ unsigned long mway_bit = (cm_error >> 8) & 1;
+ unsigned long syn_bits = (cm_error >> 0) & 0xFF;
+
+ snprintf(buf, sizeof(buf),
+ "Type=%s%s Instr=%s DW=%lu Way=%lu "
+ "MWay=%s Syndrome=0x%02lx",
+ muc_bit ? "Multi-UC " : "",
+ cm2_l2_type[arr_bits],
+ cm2_l2_instr[ins_bits], dw_bits, way_bits,
+ mway_bit ? "True" : "False", syn_bits);
}
pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
cm2_causes[cause], buf);
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 07/22] mips: Add MIPS32 Release 5 support
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
` (3 preceding siblings ...)
2020-03-06 12:08 ` [PATCH 06/22] mips: cm: Add L2 ECC/parity errors reporting Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 08/22] mips: Add MIPS Warrior P5600 support Sergey.Semin
2020-03-06 12:08 ` [PATCH 10/22] mips: Add CP0 Write Merge config support Sergey.Semin
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, Alexey Malahov, Paul Burton,
Ralf Baechle, linux-mips, linux-kernel, kvm
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
There are five MIPS32/64 architecture releases currently available:
from 1 to 6 except fourth one, which was intentionally skipped.
Three of them can be called as major: 1st, 2nd and 6th, that not only
have some system level alterations, but also introduced significant
core/ISA level updates. The rest of the MIPS architecture releases are
minor.
Even though they don't have as much ISA/system/core level changes
as the major ones with respect to the previous releases, they still
provide a set of updates (I'd say they were intended to be the
intermediate releases before a major one) that might be useful for the
kernel and user-level code, when activated by the kernel or compiler.
In particular the following features were introduced or ended up being
available at/after MIPS32 Release 5 architecture:
+ the last release of the misaligned memory access instructions,
+ virtualisation - VZ ASE - is optional component of the arch,
+ SIMD - MSA ASE - is optional component of the arch,
+ DSP ASE is optional component of the arch,
+ CP0.Status.FR=1 for CP1.FIR.F64=1 (pure 64-bit FPU general registers)
must be available if FPU is implemented,
+ CP1.FIR.Has2008 support is required so CP1.FCSR.{ABS2008,NAN2008} bits
are available.
+ UFR/UNFR aliases to access CP0.Status.FR from user-space by means of
ctc1/cfc1 instructions (enabled by CP0.Config5.UFR),
+ CP0.COnfig5.LLB=1 and eretnc instruction are implemented to without
accidentally clearing LL-bit when returning from an interrupt,
exception, or error trap,
+ XPA feature together with extended versions of CPx registers is
introduced, which needs to have mfhc0/mthc0 instructions available.
So due to these changes GNU GCC provides an extended instructions set
support for MIPS32 Release 5 by default like eretnc/mfhc0/mthc0. Even
though the architecture alteration isn't that big, it still worth to be
taken into account by the kernel software. Finally we can't deny that
some optimization/limitations might be found in future and implemented
on some level in kernel or compiler. In this case having even
intermediate MIPS architecture releases support would be more than
useful.
So the most of the changes provided by this commit can be split into
either compile- or runtime configs related. The compile-time related
changes are caused by adding the new CONFIG_CPU_MIPS32_R5/CONFIG_CPU_MIPSR5
configs and concern the code activating MIPSR2 or MIPSR6 already
implemented features (like eretnc/LLbit, mthc0/mfhc0). In addition
CPU_HAS_MSA can be now freely enabled for MIPS32 release 5 based
platforms as this is done for CPU_MIPS32_R6 CPUs. The runtime changes
concerns the features which are handled with respect to the MIPS ISA
revision detected at run-time by means of CP0.Config.{AT,AR} bits. Alas
these fields can be used to detect either r1 or r2 or r6 releases.
But since we know which CPUs in fact support the R5 arch, we can manually
set MIPS_CPU_ISA_M32R5 bit of c->isa_level and then use cpu_has_mips32_r5
where it's appropriate.
Since XPA/EVA provide too complex alterationss and to have them used with
MIPS32 Release 2 charged kernels (for compatibility with current platform
configs) they are left to be setup as a separate kernel configs.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
Even without this patch the code contains too many patterns like:
+#if defined(CONFIG_MIPS32R2) || defined(CONFIG_MIPS32R6)
What about switching it to a simpler
+#if CONFIG_TARGET_ISA_REV >= 2 ?
Though I'd prefer this config to be named like CONFIG_CPU_MIPS_REV.
What do you think?
Similarly the pattern like:
(MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)
could be replaced with simpler one:
(MIPS_CPU_ISA_M32 | MIPS_CPU_ISA_M64)
if corresponding macro were available. What do think about adding such?
We also could add CPU_MIPS64_R5 config support here, but I don't think
it's necessary at the moment seeing there is no any real chip ever
produced with that arch. Right?
---
arch/mips/Kconfig | 34 ++++++++++++++++++++++++----
arch/mips/Makefile | 1 +
arch/mips/include/asm/asmmacro.h | 18 ++++++++-------
arch/mips/include/asm/compiler.h | 5 ++++
arch/mips/include/asm/cpu-features.h | 20 +++++++++++-----
arch/mips/include/asm/cpu-info.h | 2 +-
arch/mips/include/asm/cpu-type.h | 6 ++++-
arch/mips/include/asm/cpu.h | 7 +++---
arch/mips/include/asm/fpu.h | 4 ++--
arch/mips/include/asm/hazards.h | 8 ++++---
arch/mips/include/asm/module.h | 2 ++
arch/mips/include/asm/stackframe.h | 2 +-
arch/mips/include/asm/switch_to.h | 8 +++----
arch/mips/kernel/cpu-probe.c | 12 ++++++++++
arch/mips/kernel/entry.S | 6 ++---
arch/mips/kernel/proc.c | 2 ++
arch/mips/kernel/r4k_fpu.S | 14 ++++++------
arch/mips/kvm/vz.c | 6 ++---
arch/mips/lib/csum_partial.S | 6 +++--
arch/mips/mm/c-r4k.c | 7 +++---
arch/mips/mm/sc-mips.c | 7 +++---
21 files changed, 123 insertions(+), 54 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 797d7f1ad5fe..d427d18b4bd3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1565,6 +1565,21 @@ config CPU_MIPS32_R2
specific type of processor in your system, choose those that one
otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+config CPU_MIPS32_R5
+ bool "MIPS32 Release 5"
+ depends on SYS_HAS_CPU_MIPS32_R5
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_MSA
+ select HAVE_KVM
+ select MIPS_O32_FP64_SUPPORT
+ help
+ Choose this option to build a kernel for release 5 or later of the
+ MIPS32 architecture. New MIPS processors, starting with the Warrior
+ family, are based on a MIPS32r5 processor. If you own an older
+ processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
+
config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6
@@ -1811,7 +1826,7 @@ endchoice
config CPU_MIPS32_3_5_FEATURES
bool "MIPS32 Release 3.5 Features"
depends on SYS_HAS_CPU_MIPS32_R3_5
- depends on CPU_MIPS32_R2 || CPU_MIPS32_R6
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from the 3.5 release such as
@@ -1831,7 +1846,7 @@ config CPU_MIPS32_3_5_EVA
config CPU_MIPS32_R5_FEATURES
bool "MIPS32 Release 5 Features"
depends on SYS_HAS_CPU_MIPS32_R5
- depends on CPU_MIPS32_R2
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from release 5 such as
@@ -2069,7 +2084,8 @@ endmenu
#
config CPU_MIPS32
bool
- default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
+ CPU_MIPS32_R6
config CPU_MIPS64
bool
@@ -2089,6 +2105,13 @@ config CPU_MIPSR2
select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select MIPS_SPRAM
+config CPU_MIPSR5
+ bool
+ default y if CPU_MIPS32_R5
+ select CPU_HAS_RIXI
+ select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
+ select MIPS_SPRAM
+
config CPU_MIPSR6
bool
default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
@@ -2103,6 +2126,7 @@ config TARGET_ISA_REV
int
default 1 if CPU_MIPSR1
default 2 if CPU_MIPSR2
+ default 5 if CPU_MIPSR5
default 6 if CPU_MIPSR6
default 0
help
@@ -2692,7 +2716,9 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
config RELOCATABLE
bool "Relocatable kernel"
- depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
+ depends on SYS_SUPPORTS_RELOCATABLE
+ depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R5 || \
+ CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC
help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index e1c44aed8156..9172fb0f630b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -171,6 +171,7 @@ cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 655f40ddb6d1..86f2323ebe6b 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -44,7 +44,8 @@
.endm
#endif
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
.macro local_irq_enable reg=t0
ei
irq_enable_hazard
@@ -54,7 +55,7 @@
di
irq_disable_hazard
.endm
-#else
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
ori \reg, \reg, 1
@@ -79,7 +80,7 @@
sw \reg, TI_PRE_COUNT($28)
#endif
.endm
-#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro fpu_save_16even thread tmp=t0
.set push
@@ -131,7 +132,7 @@
.macro fpu_save_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f
fpu_save_16odd \thread
@@ -190,7 +191,7 @@
.macro fpu_restore_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f # 16 register mode?
@@ -200,16 +201,17 @@
fpu_restore_16even \thread \tmp
.endm
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
.macro _EXT rd, rs, p, s
ext \rd, \rs, \p, \s
.endm
-#else /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro _EXT rd, rs, p, s
srl \rd, \rs, \p
andi \rd, \rd, (1 << \s) - 1
.endm
-#endif /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
/*
* Temporary until all gas have MT ASE support
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
index f77e99f1722e..a2cb2d2b1c07 100644
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
@@ -57,6 +57,11 @@
#define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL
#define MIPS_ISA_LEVEL_RAW mips64r6
#define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW
+#elif defined(CONFIG_CPU_MIPSR5)
+#define MIPS_ISA_LEVEL "mips64r5"
+#define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL
+#define MIPS_ISA_LEVEL_RAW mips64r5
+#define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW
#else
/* MIPS64 is a superset of MIPS32 */
#define MIPS_ISA_LEVEL "mips64r2"
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index de44c92b1c1f..e2f31bd6363b 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -284,6 +284,9 @@
#ifndef cpu_has_mips32r2
# define cpu_has_mips32r2 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M32R2)
#endif
+#ifndef cpu_has_mips32r5
+# define cpu_has_mips32r5 __isa_range_or_flag(5, 6, MIPS_CPU_ISA_M32R5)
+#endif
#ifndef cpu_has_mips32r6
# define cpu_has_mips32r6 __isa_ge_or_flag(6, MIPS_CPU_ISA_M32R6)
#endif
@@ -313,19 +316,24 @@
(cpu_has_mips_3 | cpu_has_mips_4_5_64_r2_r6)
#define cpu_has_mips_4_5_64_r2_r6 \
(cpu_has_mips_4_5 | cpu_has_mips64r1 | \
- cpu_has_mips_r2 | cpu_has_mips_r6)
+ cpu_has_mips_r2 | cpu_has_mips_r5 | \
+ cpu_has_mips_r6)
-#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | cpu_has_mips32r6)
+#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | \
+ cpu_has_mips32r5 | cpu_has_mips32r6)
#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2 | cpu_has_mips64r6)
#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r5 (cpu_has_mips32r5)
#define cpu_has_mips_r6 (cpu_has_mips32r6 | cpu_has_mips64r6)
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
- cpu_has_mips32r6 | cpu_has_mips64r1 | \
- cpu_has_mips64r2 | cpu_has_mips64r6)
+ cpu_has_mips32r5 | cpu_has_mips32r6 | \
+ cpu_has_mips64r1 | cpu_has_mips64r2 | \
+ cpu_has_mips64r6)
-/* MIPSR2 and MIPSR6 have a lot of similarities */
-#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r6)
+/* MIPSR2 - MIPSR6 have a lot of similarities */
+#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r5 | \
+ cpu_has_mips_r6)
/*
* cpu_has_mips_r2_exec_hazard - return if IHB is required on current processor
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index ed7ffe4e63a3..bce3ea7fff7c 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -142,7 +142,7 @@ struct proc_cpuinfo_notifier_args {
static inline unsigned int cpu_cluster(struct cpuinfo_mips *cpuinfo)
{
/* Optimisation for systems where multiple clusters aren't used */
- if (!IS_ENABLED(CONFIG_CPU_MIPSR6))
+ if (!IS_ENABLED(CONFIG_CPU_MIPSR5) && !IS_ENABLED(CONFIG_CPU_MIPSR6))
return 0;
return (cpuinfo->globalnumber & MIPS_GLOBALNUMBER_CLUSTER) >>
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index 49f0061a6051..11090bc20464 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -51,11 +51,15 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_M14KEC:
case CPU_INTERAPTIV:
case CPU_PROAPTIV:
- case CPU_P5600:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R5
case CPU_M5150:
+ case CPU_P5600:
#endif
#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R2) || \
+ defined(CONFIG_SYS_HAS_CPU_MIPS32_R5) || \
defined(CONFIG_SYS_HAS_CPU_MIPS32_R6) || \
defined(CONFIG_SYS_HAS_CPU_MIPS64_R2) || \
defined(CONFIG_SYS_HAS_CPU_MIPS64_R6)
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 216a22916740..9bae99b568c9 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -343,11 +343,12 @@ enum cpu_type_enum {
#define MIPS_CPU_ISA_M32R2 0x00000020
#define MIPS_CPU_ISA_M64R1 0x00000040
#define MIPS_CPU_ISA_M64R2 0x00000080
-#define MIPS_CPU_ISA_M32R6 0x00000100
-#define MIPS_CPU_ISA_M64R6 0x00000200
+#define MIPS_CPU_ISA_M32R5 0x00000100
+#define MIPS_CPU_ISA_M32R6 0x00000400
+#define MIPS_CPU_ISA_M64R6 0x00000800
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_II | MIPS_CPU_ISA_M32R1 | \
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R6)
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M32R6)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2 | \
MIPS_CPU_ISA_M64R6)
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 9476e0498d59..f0b37663fade 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -71,8 +71,8 @@ static inline int __enable_fpu(enum fpu_mode mode)
goto fr_common;
case FPU_64BIT:
-#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) \
- || defined(CONFIG_64BIT))
+#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_64BIT))
/* we only have a 32-bit FPU */
return SIGFPE;
#endif
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a0b92205f933..f855478d12fa 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -22,8 +22,9 @@
/*
* TLB hazards
*/
-#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \
- !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
+#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)) && \
+ !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
/*
* MIPSR2 defines ehb for hazard avoidance
@@ -278,7 +279,8 @@ do { \
#define __disable_fpu_hazard
-#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
#define __enable_fpu_hazard \
___ehb
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 9846047b3d3d..65067edc52e0 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -89,6 +89,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "MIPS32_R1 "
#elif defined CONFIG_CPU_MIPS32_R2
#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R5
+#define MODULE_PROC_FAMILY "MIPS32_R5 "
#elif defined CONFIG_CPU_MIPS32_R6
#define MODULE_PROC_FAMILY "MIPS32_R6 "
#elif defined CONFIG_CPU_MIPS64_R1
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 4d6ad907ae54..3e8d2aaf96af 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -424,7 +424,7 @@
.macro RESTORE_SP_AND_RET docfi=0
RESTORE_SP \docfi
-#ifdef CONFIG_CPU_MIPSR6
+#if defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
eretnc
#else
.set push
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index 09cbe9042828..0b0a93bf83cd 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -67,11 +67,11 @@ do { \
#endif
/*
- * Clear LLBit during context switches on MIPSr6 such that eretnc can be used
+ * Clear LLBit during context switches on MIPSr5+ such that eretnc can be used
* unconditionally when returning to userland in entry.S.
*/
-#define __clear_r6_hw_ll_bit() do { \
- if (cpu_has_mips_r6) \
+#define __clear_r5_hw_ll_bit() do { \
+ if (cpu_has_mips_r5 || cpu_has_mips_r6) \
write_c0_lladdr(0); \
} while (0)
@@ -129,7 +129,7 @@ do { \
} \
clear_c0_status(ST0_CU2); \
} \
- __clear_r6_hw_ll_bit(); \
+ __clear_r5_hw_ll_bit(); \
__clear_software_ll_bit(); \
if (cpu_has_userlocal) \
write_c0_userlocal(task_thread_info(next)->tp_value); \
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6ab6b03d35ba..c912277fa27a 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -92,6 +92,7 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
{
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
unsigned long sr, fir, fcsr, fcsr0, fcsr1;
@@ -172,6 +173,7 @@ static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
case STRICT:
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
} else {
@@ -263,9 +265,11 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
value = 0;
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_D | MIPS_FPIR_S;
if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
if (c->options & MIPS_CPU_NAN_2008)
@@ -286,6 +290,7 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
@@ -549,6 +554,9 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
c->isa_level |= MIPS_CPU_ISA_M32R6;
/* Break here so we don't add incompatible ISAs */
break;
+ case MIPS_CPU_ISA_M32R5:
+ c->isa_level |= MIPS_CPU_ISA_M32R5;
+ /* fall through */
case MIPS_CPU_ISA_M32R2:
c->isa_level |= MIPS_CPU_ISA_M32R2;
/* fall through */
@@ -1734,6 +1742,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
spram_config();
switch (__get_cpu_type(c->cputype)) {
+ case CPU_M5150:
+ case CPU_P5600:
+ set_isa(c, MIPS_CPU_ISA_M32R5);
+ break;
case CPU_I6500:
c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES;
/* fall-through */
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 4849a48afc0f..4b896f5023ff 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -169,8 +169,8 @@ syscall_exit_work:
jal syscall_trace_leave
b resume_userspace
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) || \
- defined(CONFIG_MIPS_MT)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_MIPS_MT)
/*
* MIPS32R2 Instruction Hazard Barrier - must be called
@@ -183,4 +183,4 @@ LEAF(mips_ihb)
nop
END(mips_ihb)
-#endif /* CONFIG_CPU_MIPSR2 or CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */
+#endif /* CONFIG_CPU_MIPSR2 - CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index f8d36710cd58..b0ffb968f07d 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -98,6 +98,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "%s", " mips32r1");
if (cpu_has_mips32r2)
seq_printf(m, "%s", " mips32r2");
+ if (cpu_has_mips32r5)
+ seq_printf(m, "%s", " mips32r5");
if (cpu_has_mips32r6)
seq_printf(m, "%s", " mips32r6");
if (cpu_has_mips64r1)
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 59be5c812aa2..b91e91106475 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -41,7 +41,7 @@
LEAF(_save_fp)
EXPORT_SYMBOL(_save_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
@@ -53,7 +53,7 @@ EXPORT_SYMBOL(_save_fp)
*/
LEAF(_restore_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
@@ -103,10 +103,10 @@ LEAF(_save_fp_context)
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5)
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
@@ -170,11 +170,11 @@ LEAF(_save_fp_context)
LEAF(_restore_fp_context)
EX lw t1, 0(a1)
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5)
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c
index dde20887a70d..66432b5ab229 100644
--- a/arch/mips/kvm/vz.c
+++ b/arch/mips/kvm/vz.c
@@ -2980,7 +2980,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
*/
/* PageGrain */
- if (cpu_has_mips_r6)
+ if (cpu_has_mips_r5 || cpu_has_mips_r6)
kvm_write_sw_gc0_pagegrain(cop0, PG_RIE | PG_XIE | PG_IEC);
/* Wired */
if (cpu_has_mips_r6)
@@ -2988,7 +2988,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
read_gc0_wired() & MIPSR6_WIRED_LIMIT);
/* Status */
kvm_write_sw_gc0_status(cop0, ST0_BEV | ST0_ERL);
- if (cpu_has_mips_r6)
+ if (cpu_has_mips_r5 || cpu_has_mips_r6)
kvm_change_sw_gc0_status(cop0, ST0_FR, read_gc0_status());
/* IntCtl */
kvm_write_sw_gc0_intctl(cop0, read_gc0_intctl() &
@@ -3086,7 +3086,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
}
/* reset HTW registers */
- if (cpu_guest_has_htw && cpu_has_mips_r6) {
+ if (cpu_guest_has_htw && (cpu_has_mips_r5 || cpu_has_mips_r6)) {
/* PWField */
kvm_write_sw_gc0_pwfield(cop0, 0x0c30c302);
/* PWSize */
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index fda7b57b826e..87fda0713b84 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -279,7 +279,8 @@ EXPORT_SYMBOL(csum_partial)
#endif
/* odd buffer alignment? */
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
.set push
.set arch=mips32r2
wsbh v1, sum
@@ -732,7 +733,8 @@ EXPORT_SYMBOL(csum_partial)
addu sum, v1
#endif
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
.set push
.set arch=mips32r2
wsbh v1, sum
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5f3d0103b95d..33c5806f8f63 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1674,9 +1674,10 @@ static void setup_scache(void)
return;
default:
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
#ifdef CONFIG_MIPS_CPU_SCACHE
if (mips_sc_init ()) {
scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index dbdbfe5d8408..6fae3014ad3e 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -194,9 +194,10 @@ static inline int __init mips_sc_probe(void)
return mips_sc_probe_cm3();
/* Ignore anything but MIPSxx processors */
- if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)))
+ if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)))
return 0;
/* Does this MIPS32/MIPS64 CPU have a config2 register? */
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 08/22] mips: Add MIPS Warrior P5600 support
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
` (4 preceding siblings ...)
2020-03-06 12:08 ` [PATCH 07/22] mips: Add MIPS32 Release 5 support Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
2020-03-06 12:08 ` [PATCH 10/22] mips: Add CP0 Write Merge config support Sergey.Semin
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, Alexey Malahov, Paul Burton,
Ralf Baechle, linux-mips, linux-kernel
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue
exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features
and system level features like up to six P5600 calculation cores, CM2
with L2 cache, IOCU/IOMMU (though might be unused depending on the
system-specific IP core configuration), GIC, CPC, virtualisation module,
eJTAG and PDtrace.
As being MIPS32 Release 5 based core it provides all the features
available by the CPU_MIPS32_R5 config, while adding a few more like
UCA attribute support, availability of CPU-freq (by means of L2/CM
clock ratio setting), EI/VI GIC modes detection at runtime.
In addition to this if P5600 architecture is enabled modern GNU GCC
provides a specific tuning for P5600 processors with respect to the
classic MIPS32 Release 5. First of all branch-likely avoidance is
activated only when the code is compiled with the speed optimization
(avoidance is always enabled for the pure MIPS32 Release 5
architecture). Secondly the madd/msub avoidance is enabled since
madd/msub utilization isn't profitable due to overhead of getting the
result out of the HI/LO registers. Multiply-accumulate instructions are
activated and utilized together with the necessary code reorder when
multiply-add/multiply-subtract statements are met. Finally load/store
bonding is activated by default. All of these optimizations may make
the code relatively faster than if just MIP32 release 5 architecture
was requested.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Kconfig | 38 +++++++++++++++++++++++++++++-----
arch/mips/Makefile | 1 +
arch/mips/include/asm/module.h | 2 ++
3 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d427d18b4bd3..fd1366921a80 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1650,6 +1650,28 @@ config CPU_MIPS64_R6
family, are based on a MIPS64r6 processor. If you own an older
processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
+config CPU_P5600
+ bool "MIPS Warrior P5600"
+ depends on SYS_HAS_CPU_P5600
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_MSA
+ select CPU_SUPPORTS_UNCACHED_ACCELERATED
+ select CPU_SUPPORTS_CPUFREQ
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select HAVE_KVM
+ select MIPS_O32_FP64_SUPPORT
+ help
+ Choose this option to build a kernel for MIPS Warrior P5600 CPU.
+ It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
+ MMU with two-levels TLB, UCA, MSA, MDU core level features and system
+ level features like up to six P5600 calculation cores, CM2 with L2
+ cache, IOCU/IOMMU (though might be unused depending on the system-
+ specific IP core configuration), GIC, CPC, virtualisation module,
+ eJTAG and PDtrace.
+
config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
@@ -1826,7 +1848,8 @@ endchoice
config CPU_MIPS32_3_5_FEATURES
bool "MIPS32 Release 3.5 Features"
depends on SYS_HAS_CPU_MIPS32_R3_5
- depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
+ CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from the 3.5 release such as
@@ -1846,7 +1869,7 @@ config CPU_MIPS32_3_5_EVA
config CPU_MIPS32_R5_FEATURES
bool "MIPS32 Release 5 Features"
depends on SYS_HAS_CPU_MIPS32_R5
- depends on CPU_MIPS32_R2 || CPU_MIPS32_R5
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from release 5 such as
@@ -2001,6 +2024,10 @@ config SYS_HAS_CPU_MIPS64_R6
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+config SYS_HAS_CPU_P5600
+ bool
+ select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
config SYS_HAS_CPU_R3000
bool
@@ -2085,7 +2112,7 @@ endmenu
config CPU_MIPS32
bool
default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
- CPU_MIPS32_R6
+ CPU_MIPS32_R6 || CPU_P5600
config CPU_MIPS64
bool
@@ -2107,7 +2134,7 @@ config CPU_MIPSR2
config CPU_MIPSR5
bool
- default y if CPU_MIPS32_R5
+ default y if CPU_MIPS32_R5 || CPU_P5600
select CPU_HAS_RIXI
select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select MIPS_SPRAM
@@ -2718,7 +2745,8 @@ config RELOCATABLE
bool "Relocatable kernel"
depends on SYS_SUPPORTS_RELOCATABLE
depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R5 || \
- CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC
+ CPU_MIPS32_R6 || CPU_MIPS64_R6 || CPU_P5600 || \
+ CAVIUM_OCTEON_SOC
help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9172fb0f630b..264dead560f4 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -176,6 +176,7 @@ cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
+cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 65067edc52e0..fe4637ddbf49 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -99,6 +99,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "MIPS64_R2 "
#elif defined CONFIG_CPU_MIPS64_R6
#define MODULE_PROC_FAMILY "MIPS64_R6 "
+#elif defined CONFIG_CPU_P5600
+#define MODULE_PROC_FAMILY "P5600 "
#elif defined CONFIG_CPU_R3000
#define MODULE_PROC_FAMILY "R3000 "
#elif defined CONFIG_CPU_TX39XX
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 10/22] mips: Add CP0 Write Merge config support
[not found] <20200306120847.32690-1-Sergey.Semin@baikalelectronics.ru>
` (5 preceding siblings ...)
2020-03-06 12:08 ` [PATCH 08/22] mips: Add MIPS Warrior P5600 support Sergey.Semin
@ 2020-03-06 12:08 ` Sergey.Semin
6 siblings, 0 replies; 12+ messages in thread
From: Sergey.Semin @ 2020-03-06 12:08 UTC (permalink / raw)
To: Thomas Bogendoerfer
Cc: Serge Semin, Serge Semin, Alexey Malahov, Paul Burton,
Ralf Baechle, linux-mips, linux-kernel
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
CP0 config register may indicate whether write-through merging
is allowed. Currently there are two types of the merging available:
SysAD Valid and Full modes. Whether each of them are supported by
the core is implementation dependent. Moreover whether the ability
to change the mode also depends on the chip family instance. Taking
into account all of this we created a dedicated mm_config() method
to detect and enable merging if it's supported. It is called for
MIPS-type processors at CPU-probe stage and attempts to detect whether
the write merging is available. If it's known to be supported and
switchable, then switch on the full mode. Otherwise just perform the
CP0.Config.MM field analysis.
In addition there are platforms like InterAptiv/ProAptiv, which do have
the MM bit field set by default, but having write-through cacheing
unsupported makes write-merging also unsupported. In this case we just
ignore the MM field value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/cpu-features.h | 8 +++++
arch/mips/include/asm/cpu.h | 4 ++-
arch/mips/include/asm/mipsregs.h | 3 ++
arch/mips/kernel/cpu-probe.c | 48 ++++++++++++++++++++++++++++
4 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 7e22b9c1e279..2b818f2036d0 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -630,6 +630,14 @@
# endif
#endif
+#ifndef cpu_has_mm_sysad
+# define cpu_has_mm_sysad __opt(MIPS_CPU_MM_SYSAD)
+#endif
+
+#ifndef cpu_has_mm_full
+# define cpu_has_mm_full __opt(MIPS_CPU_MM_FULL)
+#endif
+
/*
* Guest capabilities
*/
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 9bae99b568c9..191529ef0d05 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -417,7 +417,9 @@ enum cpu_type_enum {
#define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \
BIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */
#define MIPS_CPU_MMID BIT_ULL(57) /* CPU supports MemoryMapIDs */
-#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(58) /* CPU Only support MAC2008 Fused multiply-add instruction */
+#define MIPS_CPU_MM_SYSAD BIT_ULL(58) /* CPU supports write-through SysAD Valid merge */
+#define MIPS_CPU_MM_FULL BIT_ULL(59) /* CPU supports write-through full merge */
+#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(60) /* CPU Only support MAC2008 Fused multiply-add instruction */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 796fe47cfd17..b1c761279b13 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -563,6 +563,9 @@
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_MM (_ULCAST_(3) << 17)
+#define MIPS_CONF_MM_SYSAD (_ULCAST_(1) << 17)
+#define MIPS_CONF_MM_FULL (_ULCAST_(2) << 17)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c912277fa27a..ffe8956b7981 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -650,6 +650,52 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
return 0;
}
+static int mm_config(struct cpuinfo_mips *c)
+{
+ unsigned int config0, update, mm;
+
+ config0 = read_c0_config();
+ mm = config0 & MIPS_CONF_MM;
+
+ /*
+ * It's implementation dependent what type of write-merge is supported
+ * and whether it can be enabled/disabled. If it is settable lets make
+ * the merging allowed by default. Some platforms might have
+ * write-through caching unsupported. In this case just ignore the
+ * CP0.Config.MM bit field value.
+ */
+ switch (c->cputype) {
+ case CPU_24K:
+ case CPU_34K:
+ case CPU_74K:
+ case CPU_P5600:
+ case CPU_P6600:
+ c->options |= MIPS_CPU_MM_FULL;
+ update = MIPS_CONF_MM_FULL;
+ break;
+ case CPU_1004K:
+ case CPU_1074K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
+ mm = 0;
+ /* fall through */
+ default:
+ update = 0;
+ break;
+ }
+
+ if (update) {
+ config0 = (config0 & ~MIPS_CONF_MM) | update;
+ write_c0_config(config0);
+ } else if (mm == MIPS_CONF_MM_SYSAD) {
+ c->options |= MIPS_CPU_MM_SYSAD;
+ } else if (mm == MIPS_CONF_MM_FULL) {
+ c->options |= MIPS_CPU_MM_FULL;
+ }
+
+ return 0;
+}
+
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
@@ -1741,6 +1787,8 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
spram_config();
+ mm_config(c);
+
switch (__get_cpu_type(c->cputype)) {
case CPU_M5150:
case CPU_P5600:
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread