From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com>,
"David S . Miller" <davem@davemloft.net>,
netdev <netdev@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
<devicetree@vger.kernel.org>, Jakub Kicinski <kuba@kernel.org>
Cc: Murali Karicheri <m-karicheri2@ti.com>,
Sekhar Nori <nsekhar@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next v3 07/10] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Date: Fri, 13 Mar 2020 19:55:08 +0200 [thread overview]
Message-ID: <20200313175511.2155-8-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20200313175511.2155-1-grygorii.strashko@ti.com>
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS
Port 1 in rgmii-rxid mode.
Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit
Ethernet two ports Switch subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1700996800eb..2f3d3316a1cf 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -7,6 +7,7 @@
#include "k3-am654.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
/ {
compatible = "ti,am654-evm", "ti,am654";
@@ -95,7 +96,30 @@
wkup_pca554_default: wkup_pca554_default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+ >;
+ };
+
+ mcu_cpsw_pins_default: mcu_cpsw_pins_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+ AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+ AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+ AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+ AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+ AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+ AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+ >;
+ };
+ mcu_mdio_pins_default: mcu_mdio1_pins_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>;
};
};
@@ -419,3 +443,21 @@
data-lanes = <1 2>;
};
};
+
+&mcu_cpsw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy0>;
+};
--
2.17.1
next prev parent reply other threads:[~2020-03-13 17:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-13 17:55 [PATCH net-next v3 00/10] net: ethernet: ti: add networking support for k3 am65x/j721e soc Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 01/10] net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 02/10] net: ethernet: ti: ale: add support for mac-only mode Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 03/10] net: ethernet: ti: ale: am65: add support for default thread cfg Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 04/10] dt-binding: ti: am65x: document mcu cpsw nuss Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 05/10] net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver Grygorii Strashko
2020-03-13 20:04 ` Jakub Kicinski
2020-03-13 17:55 ` [PATCH net-next v3 06/10] arm64: dts: ti: k3-am65-mcu: add cpsw nuss node Grygorii Strashko
2020-03-13 17:55 ` Grygorii Strashko [this message]
2020-03-13 17:55 ` [PATCH net-next v3 08/10] arm64: dts: ti: k3-j721e-mcu: add mcu " Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 09/10] arm64: dts: ti: k3-j721e-common-proc-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko
2020-03-13 17:55 ` [PATCH net-next v3 10/10] arm64: defconfig: ti: k3: enable dma and networking Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200313175511.2155-8-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).