* [PATCH AUTOSEL 4.14 02/15] spi: qup: call spi_qup_pm_resume_runtime before suspending
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 03/15] powerpc: Include .BTF section Sasha Levin
` (12 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yuji Sasaki, Vinod Koul, Mark Brown, Sasha Levin, linux-arm-msm,
linux-spi
From: Yuji Sasaki <sasakiy@chromium.org>
[ Upstream commit 136b5cd2e2f97581ae560cff0db2a3b5369112da ]
spi_qup_suspend() will cause synchronous external abort when
runtime suspend is enabled and applied, as it tries to
access SPI controller register while clock is already disabled
in spi_qup_pm_suspend_runtime().
Signed-off-by: Yuji sasaki <sasakiy@chromium.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200214074340.2286170-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-qup.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 974a8ce58b68b..cb74fd1af2053 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -1190,6 +1190,11 @@ static int spi_qup_suspend(struct device *device)
struct spi_qup *controller = spi_master_get_devdata(master);
int ret;
+ if (pm_runtime_suspended(device)) {
+ ret = spi_qup_pm_resume_runtime(device);
+ if (ret)
+ return ret;
+ }
ret = spi_master_suspend(master);
if (ret)
return ret;
@@ -1198,10 +1203,8 @@ static int spi_qup_suspend(struct device *device)
if (ret)
return ret;
- if (!pm_runtime_suspended(device)) {
- clk_disable_unprepare(controller->cclk);
- clk_disable_unprepare(controller->iclk);
- }
+ clk_disable_unprepare(controller->cclk);
+ clk_disable_unprepare(controller->iclk);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 03/15] powerpc: Include .BTF section
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 02/15] spi: qup: call spi_qup_pm_resume_runtime before suspending Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 04/15] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes Sasha Levin
` (11 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Naveen N. Rao, Michael Ellerman, Sasha Levin, linuxppc-dev
From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
[ Upstream commit cb0cc635c7a9fa8a3a0f75d4d896721819c63add ]
Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld:
ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF'
Include .BTF section in vmlinux explicitly to fix the same.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/vmlinux.lds.S | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index b0cf4af7ba840..e4da937d6cf91 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -317,6 +317,12 @@ SECTIONS
*(.branch_lt)
}
+#ifdef CONFIG_DEBUG_INFO_BTF
+ .BTF : AT(ADDR(.BTF) - LOAD_OFFSET) {
+ *(.BTF)
+ }
+#endif
+
.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
*(.opd)
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 04/15] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 02/15] spi: qup: call spi_qup_pm_resume_runtime before suspending Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 03/15] powerpc: Include .BTF section Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 05/15] spi: pxa2xx: Add CS control clock quirk Sasha Levin
` (10 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Tony Lindgren, Sasha Levin, linux-omap,
devicetree
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/dra7.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fec965009b9fc..a40a7af85d020 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -302,6 +302,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -356,6 +357,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 05/15] spi: pxa2xx: Add CS control clock quirk
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (2 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 04/15] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 06/15] spi/zynqmp: remove entry that causes a cs glitch Sasha Levin
` (9 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Evan Green, Rajat Jain, Mark Brown, Sasha Levin,
linux-arm-kernel, linux-spi
From: Evan Green <evgreen@chromium.org>
[ Upstream commit 683f65ded66a9a7ff01ed7280804d2132ebfdf7e ]
In some circumstances on Intel LPSS controllers, toggling the LPSS
CS control register doesn't actually cause the CS line to toggle.
This seems to be failure of dynamic clock gating that occurs after
going through a suspend/resume transition, where the controller
is sent through a reset transition. This ruins SPI transactions
that either rely on delay_usecs, or toggle the CS line without
sending data.
Whenever CS is toggled, momentarily set the clock gating register
to "Force On" to poke the controller into acting on CS.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200211223700.110252-1-rajatja@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-pxa2xx.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b2245cdce230b..5160e16d3a985 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -76,6 +76,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define LPSS_CAPS_CS_EN_SHIFT 9
#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT)
+#define LPSS_PRIV_CLOCK_GATE 0x38
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK 0x3
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON 0x3
+
struct lpss_config {
/* LPSS offset from drv_data->ioaddr */
unsigned offset;
@@ -92,6 +96,8 @@ struct lpss_config {
unsigned cs_sel_shift;
unsigned cs_sel_mask;
unsigned cs_num;
+ /* Quirks */
+ unsigned cs_clk_stays_gated : 1;
};
/* Keep these sorted with enum pxa_ssp_type */
@@ -162,6 +168,7 @@ static const struct lpss_config lpss_platforms[] = {
.tx_threshold_hi = 56,
.cs_sel_shift = 8,
.cs_sel_mask = 3 << 8,
+ .cs_clk_stays_gated = true,
},
};
@@ -385,6 +392,22 @@ static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
else
value |= LPSS_CS_CONTROL_CS_HIGH;
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
+ if (config->cs_clk_stays_gated) {
+ u32 clkgate;
+
+ /*
+ * Changing CS alone when dynamic clock gating is on won't
+ * actually flip CS at that time. This ruins SPI transfers
+ * that specify delays, or have no data. Toggle the clock mode
+ * to force on briefly to poke the CS pin to move.
+ */
+ clkgate = __lpss_ssp_read_priv(drv_data, LPSS_PRIV_CLOCK_GATE);
+ value = (clkgate & ~LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK) |
+ LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON;
+
+ __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, value);
+ __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, clkgate);
+ }
}
static void cs_assert(struct driver_data *drv_data)
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 06/15] spi/zynqmp: remove entry that causes a cs glitch
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (3 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 05/15] spi: pxa2xx: Add CS control clock quirk Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 07/15] drm/exynos: dsi: propagate error value and silence meaningless warning Sasha Levin
` (8 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Thommy Jakobsson, Naga Sureshkumar Relli, Mark Brown,
Sasha Levin, linux-spi, linux-arm-kernel
From: Thommy Jakobsson <thommyj@gmail.com>
[ Upstream commit 5dd8304981ecffa77bb72b1c57c4be5dfe6cfae9 ]
In the public interface for chipselect, there is always an entry
commented as "Dummy generic FIFO entry" pushed down to the fifo right
after the activate/deactivate command. The dummy entry is 0x0,
irregardless if the intention was to activate or deactive the cs. This
causes the cs line to glitch rather than beeing activated in the case
when there was an activate command.
This has been observed on oscilloscope, and have caused problems for at
least one specific flash device type connected to the qspi port. After
the change the glitch is gone and cs goes active when intended.
The reason why this worked before (except for the glitch) was because
when sending the actual data, the CS bits are once again set. Since
most flashes uses mode 0, there is always a half clk period anyway for
cs to clk active setup time. If someone would rely on timing from a
chip_select call to a transfer_one, it would fail though.
It is unknown why the dummy entry was there in the first place, git log
seems to be of no help in this case. The reference manual gives no
indication of the necessity of this. In fact the lower 8 bits are a
setup (or hold in case of deactivate) time expressed in cycles. So this
should not be needed to fulfill any setup/hold timings.
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Reviewed-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 18aeaceee2862..d26c0eda2d9ea 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -415,9 +415,6 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
- /* Dummy generic FIFO entry */
- zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
-
/* Manually start the generic FIFO command */
zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 07/15] drm/exynos: dsi: propagate error value and silence meaningless warning
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (4 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 06/15] spi/zynqmp: remove entry that causes a cs glitch Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 08/15] drm/exynos: dsi: fix workaround for the legacy clock name Sasha Levin
` (7 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Szyprowski, Krzysztof Kozlowski, Inki Dae, Sasha Levin,
dri-devel, linux-arm-kernel, linux-samsung-soc
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]
Properly propagate error value from devm_regulator_bulk_get() and don't
confuse user with meaningless warning about failure in getting regulators
in case of deferred probe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 7904ffa9abfb9..aef18f807e383 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1739,8 +1739,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
dsi->supplies);
if (ret) {
- dev_info(dev, "failed to get regulators: %d\n", ret);
- return -EPROBE_DEFER;
+ if (ret != -EPROBE_DEFER)
+ dev_info(dev, "failed to get regulators: %d\n", ret);
+ return ret;
}
dsi->clks = devm_kzalloc(dev,
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 08/15] drm/exynos: dsi: fix workaround for the legacy clock name
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (5 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 07/15] drm/exynos: dsi: propagate error value and silence meaningless warning Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 09/15] drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer Sasha Levin
` (6 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Szyprowski, Andrzej Hajda, Inki Dae, Sasha Levin,
dri-devel, linux-arm-kernel, linux-samsung-soc
From: Marek Szyprowski <m.szyprowski@samsung.com>
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]
Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978
pgd = (ptrval)
[bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
Internal error: Oops: 80f [#1] SMP ARM
Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
videodev: Linux video capture interface: v2.00
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
...
Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
...
[<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
[<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
[<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
[<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
[<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
[<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
[<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
[<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
[<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
[<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
[<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
[<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xd979bfa8 to 0xd979bff0)
...
---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index aef18f807e383..366c975cde5b7 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1754,9 +1754,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
if (IS_ERR(dsi->clks[i])) {
if (strcmp(clk_names[i], "sclk_mipi") == 0) {
- strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
- i--;
- continue;
+ dsi->clks[i] = devm_clk_get(dev,
+ OLD_SCLK_MIPI_CLK_NAME);
+ if (!IS_ERR(dsi->clks[i]))
+ continue;
}
dev_info(dev, "failed to get the clock: %s\n",
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 09/15] drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (6 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 08/15] drm/exynos: dsi: fix workaround for the legacy clock name Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 10/15] altera-stapl: altera_get_note: prevent write beyond end of 'key' Sasha Levin
` (5 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: luanshi, Will Deacon, Sasha Levin, linux-arm-kernel
From: luanshi <zhangliguang@linux.alibaba.com>
[ Upstream commit 3ba52ad55b533760a1f65836aa0ec9d35e36bb4f ]
Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc()
by checking for a 0 'gicc->performance_interrupt' value instead.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/perf/arm_pmu_acpi.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index 3303dd8d8eb57..604e549a9a47d 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -25,8 +25,6 @@ static int arm_pmu_acpi_register_irq(int cpu)
int gsi, trigger;
gicc = acpi_cpu_get_madt_gicc(cpu);
- if (WARN_ON(!gicc))
- return -EINVAL;
gsi = gicc->performance_interrupt;
@@ -65,11 +63,10 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
int gsi;
gicc = acpi_cpu_get_madt_gicc(cpu);
- if (!gicc)
- return;
gsi = gicc->performance_interrupt;
- acpi_unregister_gsi(gsi);
+ if (gsi)
+ acpi_unregister_gsi(gsi);
}
static int arm_pmu_acpi_parse_irqs(void)
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 10/15] altera-stapl: altera_get_note: prevent write beyond end of 'key'
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (7 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 09/15] drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 11/15] dm bio record: save/restore bi_end_io and bi_integrity Sasha Levin
` (4 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Daniel Axtens, Igor M. Liplianin, Kees Cook, Greg Kroah-Hartman,
Sasha Levin
From: Daniel Axtens <dja@axtens.net>
[ Upstream commit 3745488e9d599916a0b40d45d3f30e3d4720288e ]
altera_get_note is called from altera_init, where key is kzalloc(33).
When the allocation functions are annotated to allow the compiler to see
the sizes of objects, and with FORTIFY_SOURCE, we see:
In file included from drivers/misc/altera-stapl/altera.c:14:0:
In function ‘strlcpy’,
inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5:
include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter
__write_overflow();
^~~~~~~~~~~~~~~~~~
That refers to this code in altera_get_note:
if (key != NULL)
strlcpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
length);
The error triggers because the length of 'key' is 33, but the copy
uses length supplied as the 'length' parameter, which is always
256. Split the size parameter into key_len and val_len, and use the
appropriate length depending on what is being copied.
Detected by compiler error, only compile-tested.
Cc: "Igor M. Liplianin" <liplianin@netup.ru>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20200120074344.504-2-dja@axtens.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/altera-stapl/altera.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c
index 494e263daa748..b7ee8043a133e 100644
--- a/drivers/misc/altera-stapl/altera.c
+++ b/drivers/misc/altera-stapl/altera.c
@@ -2126,8 +2126,8 @@ static int altera_execute(struct altera_state *astate,
return status;
}
-static int altera_get_note(u8 *p, s32 program_size,
- s32 *offset, char *key, char *value, int length)
+static int altera_get_note(u8 *p, s32 program_size, s32 *offset,
+ char *key, char *value, int keylen, int vallen)
/*
* Gets key and value of NOTE fields in the JBC file.
* Can be called in two modes: if offset pointer is NULL,
@@ -2184,7 +2184,7 @@ static int altera_get_note(u8 *p, s32 program_size,
&p[note_table + (8 * i) + 4])];
if (value != NULL)
- strlcpy(value, value_ptr, length);
+ strlcpy(value, value_ptr, vallen);
}
}
@@ -2203,13 +2203,13 @@ static int altera_get_note(u8 *p, s32 program_size,
strlcpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
- length);
+ keylen);
if (value != NULL)
strlcpy(value, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i) + 4])],
- length);
+ vallen);
*offset = i + 1;
}
@@ -2463,7 +2463,7 @@ int altera_init(struct altera_config *config, const struct firmware *fw)
__func__, (format_version == 2) ? "Jam STAPL" :
"pre-standardized Jam 1.1");
while (altera_get_note((u8 *)fw->data, fw->size,
- &offset, key, value, 256) == 0)
+ &offset, key, value, 32, 256) == 0)
printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
__func__, key, value);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 11/15] dm bio record: save/restore bi_end_io and bi_integrity
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (8 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 10/15] altera-stapl: altera_get_note: prevent write beyond end of 'key' Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 12/15] xenbus: req->body should be updated before req->state Sasha Levin
` (3 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Mike Snitzer, Mikulas Patocka, Sasha Levin, dm-devel
From: Mike Snitzer <snitzer@redhat.com>
[ Upstream commit 1b17159e52bb31f982f82a6278acd7fab1d3f67b ]
Also, save/restore __bi_remaining in case the bio was used in a
BIO_CHAIN (e.g. due to blk_queue_split).
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-bio-record.h | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/md/dm-bio-record.h b/drivers/md/dm-bio-record.h
index c82578af56a5b..2ea0360108e1d 100644
--- a/drivers/md/dm-bio-record.h
+++ b/drivers/md/dm-bio-record.h
@@ -20,8 +20,13 @@
struct dm_bio_details {
struct gendisk *bi_disk;
u8 bi_partno;
+ int __bi_remaining;
unsigned long bi_flags;
struct bvec_iter bi_iter;
+ bio_end_io_t *bi_end_io;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ struct bio_integrity_payload *bi_integrity;
+#endif
};
static inline void dm_bio_record(struct dm_bio_details *bd, struct bio *bio)
@@ -30,6 +35,11 @@ static inline void dm_bio_record(struct dm_bio_details *bd, struct bio *bio)
bd->bi_partno = bio->bi_partno;
bd->bi_flags = bio->bi_flags;
bd->bi_iter = bio->bi_iter;
+ bd->__bi_remaining = atomic_read(&bio->__bi_remaining);
+ bd->bi_end_io = bio->bi_end_io;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ bd->bi_integrity = bio_integrity(bio);
+#endif
}
static inline void dm_bio_restore(struct dm_bio_details *bd, struct bio *bio)
@@ -38,6 +48,11 @@ static inline void dm_bio_restore(struct dm_bio_details *bd, struct bio *bio)
bio->bi_partno = bd->bi_partno;
bio->bi_flags = bd->bi_flags;
bio->bi_iter = bd->bi_iter;
+ atomic_set(&bio->__bi_remaining, bd->__bi_remaining);
+ bio->bi_end_io = bd->bi_end_io;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ bio->bi_integrity = bd->bi_integrity;
+#endif
}
#endif
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 12/15] xenbus: req->body should be updated before req->state
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (9 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 11/15] dm bio record: save/restore bi_end_io and bi_integrity Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 13/15] xenbus: req->err " Sasha Levin
` (2 subsequent siblings)
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dongli Zhang, Julien Grall, Boris Ostrovsky, Sasha Levin, xen-devel
From: Dongli Zhang <dongli.zhang@oracle.com>
[ Upstream commit 1b6a51e86cce38cf4d48ce9c242120283ae2f603 ]
The req->body should be updated before req->state is updated and the
order should be guaranteed by a barrier.
Otherwise, read_reply() might return req->body = NULL.
Below is sample callstack when the issue is reproduced on purpose by
reordering the updates of req->body and req->state and adding delay in
code between updates of req->state and req->body.
[ 22.356105] general protection fault: 0000 [#1] SMP PTI
[ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6
[ 22.366727] Hardware name: Xen HVM domU, BIOS ...
[ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60
... ...
[ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246
[ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000
[ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d
[ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd
[ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000
[ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000
[ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000
[ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0
[ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 22.450342] Call Trace:
[ 22.452509] simple_strtoull+0x27/0x70
[ 22.455572] xenbus_transaction_start+0x31/0x50
[ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront]
[ 22.463279] ? find_watch+0x40/0x40
[ 22.466156] xenwatch_thread+0xb4/0x150
[ 22.469309] ? wait_woken+0x80/0x80
[ 22.472198] kthread+0x10e/0x130
[ 22.474925] ? kthread_park+0x80/0x80
[ 22.477946] ret_from_fork+0x35/0x40
[ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront
[ 22.486783] ---[ end trace a9222030a747c3f7 ]---
[ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60
The virt_rmb() is added in the 'true' path of test_reply(). The "while"
is changed to "do while" so that test_reply() is used as a read memory
barrier.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-1-dongli.zhang@oracle.com
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/xenbus/xenbus_comms.c | 2 ++
drivers/xen/xenbus/xenbus_xs.c | 9 ++++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c
index d239fc3c5e3de..852ed161fc2a7 100644
--- a/drivers/xen/xenbus/xenbus_comms.c
+++ b/drivers/xen/xenbus/xenbus_comms.c
@@ -313,6 +313,8 @@ static int process_msg(void)
req->msg.type = state.msg.type;
req->msg.len = state.msg.len;
req->body = state.body;
+ /* write body, then update state */
+ virt_wmb();
req->state = xb_req_state_got_reply;
req->cb(req);
} else
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 3f3b29398ab8e..b609c6e08796e 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -188,8 +188,11 @@ static bool xenbus_ok(void)
static bool test_reply(struct xb_req_data *req)
{
- if (req->state == xb_req_state_got_reply || !xenbus_ok())
+ if (req->state == xb_req_state_got_reply || !xenbus_ok()) {
+ /* read req->state before all other fields */
+ virt_rmb();
return true;
+ }
/* Make sure to reread req->state each time. */
barrier();
@@ -199,7 +202,7 @@ static bool test_reply(struct xb_req_data *req)
static void *read_reply(struct xb_req_data *req)
{
- while (req->state != xb_req_state_got_reply) {
+ do {
wait_event(req->wq, test_reply(req));
if (!xenbus_ok())
@@ -213,7 +216,7 @@ static void *read_reply(struct xb_req_data *req)
if (req->err)
return ERR_PTR(req->err);
- }
+ } while (req->state != xb_req_state_got_reply);
return req->body;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 13/15] xenbus: req->err should be updated before req->state
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (10 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 12/15] xenbus: req->body should be updated before req->state Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 14/15] block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group() Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 15/15] parse-maintainers: Mark as executable Sasha Levin
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dongli Zhang, Julien Grall, Boris Ostrovsky, Sasha Levin, xen-devel
From: Dongli Zhang <dongli.zhang@oracle.com>
[ Upstream commit 8130b9d5b5abf26f9927b487c15319a187775f34 ]
This patch adds the barrier to guarantee that req->err is always updated
before req->state.
Otherwise, read_reply() would not return ERR_PTR(req->err) but
req->body, when process_writes()->xb_write() is failed.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.com
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/xenbus/xenbus_comms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c
index 852ed161fc2a7..eb5151fc8efab 100644
--- a/drivers/xen/xenbus/xenbus_comms.c
+++ b/drivers/xen/xenbus/xenbus_comms.c
@@ -397,6 +397,8 @@ static int process_writes(void)
if (state.req->state == xb_req_state_aborted)
kfree(state.req);
else {
+ /* write err, then update state */
+ virt_wmb();
state.req->state = xb_req_state_got_reply;
wake_up(&state.req->wq);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 14/15] block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (11 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 13/15] xenbus: req->err " Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 15/15] parse-maintainers: Mark as executable Sasha Levin
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Carlo Nonato, Kwon Je Oh, Paolo Valente, Jens Axboe, Sasha Levin,
cgroups, linux-block
From: Carlo Nonato <carlo.nonato95@gmail.com>
[ Upstream commit 14afc59361976c0ba39e3a9589c3eaa43ebc7e1d ]
The bfq_find_set_group() function takes as input a blkcg (which represents
a cgroup) and retrieves the corresponding bfq_group, then it updates the
bfq internal group hierarchy (see comments inside the function for why
this is needed) and finally it returns the bfq_group.
In the hierarchy update cycle, the pointer holding the correct bfq_group
that has to be returned is mistakenly used to traverse the hierarchy
bottom to top, meaning that in each iteration it gets overwritten with the
parent of the current group. Since the update cycle stops at root's
children (depth = 2), the overwrite becomes a problem only if the blkcg
describes a cgroup at a hierarchy level deeper than that (depth > 2). In
this case the root's child that happens to be also an ancestor of the
correct bfq_group is returned. The main consequence is that processes
contained in a cgroup at depth greater than 2 are wrongly placed in the
group described above by BFQ.
This commits fixes this problem by using a different bfq_group pointer in
the update cycle in order to avoid the overwrite of the variable holding
the original group reference.
Reported-by: Kwon Je Oh <kwonje.oh2@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato95@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bfq-cgroup.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index afbbe5750a1f8..7d7aee024ece2 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -499,12 +499,13 @@ struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
*/
entity = &bfqg->entity;
for_each_entity(entity) {
- bfqg = container_of(entity, struct bfq_group, entity);
- if (bfqg != bfqd->root_group) {
- parent = bfqg_parent(bfqg);
+ struct bfq_group *curr_bfqg = container_of(entity,
+ struct bfq_group, entity);
+ if (curr_bfqg != bfqd->root_group) {
+ parent = bfqg_parent(curr_bfqg);
if (!parent)
parent = bfqd->root_group;
- bfq_group_set_parent(bfqg, parent);
+ bfq_group_set_parent(curr_bfqg, parent);
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH AUTOSEL 4.14 15/15] parse-maintainers: Mark as executable
2020-03-16 2:35 [PATCH AUTOSEL 4.14 01/15] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
` (12 preceding siblings ...)
2020-03-16 2:35 ` [PATCH AUTOSEL 4.14 14/15] block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group() Sasha Levin
@ 2020-03-16 2:35 ` Sasha Levin
13 siblings, 0 replies; 15+ messages in thread
From: Sasha Levin @ 2020-03-16 2:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jonathan Neuschäfer, Linus Torvalds, Sasha Levin
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
[ Upstream commit 611d61f9ac99dc9e1494473fb90117a960a89dfa ]
This makes the script more convenient to run.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
scripts/parse-maintainers.pl | 0
1 file changed, 0 insertions(+), 0 deletions(-)
mode change 100644 => 100755 scripts/parse-maintainers.pl
diff --git a/scripts/parse-maintainers.pl b/scripts/parse-maintainers.pl
old mode 100644
new mode 100755
--
2.20.1
^ permalink raw reply [flat|nested] 15+ messages in thread