* [PATCH v2 0/2] ASoC: sdm845: fix soundwire stream handling @ 2020-03-17 15:12 Srinivas Kandagatla 2020-03-17 15:12 ` [PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream Srinivas Kandagatla 2020-03-17 15:12 ` [PATCH v2 2/2] ASoC: codecs: wsa881x: remove soundwire stream handling Srinivas Kandagatla 0 siblings, 2 replies; 4+ messages in thread From: Srinivas Kandagatla @ 2020-03-17 15:12 UTC (permalink / raw) To: broonie Cc: alsa-devel, lgirdwood, perex, linux-kernel, pierre-louis.bossart, vkoul, Srinivas Kandagatla Recent addition of SoundWire stream state-machine checks in linux-next have shown an existing issue with handling soundwire streams in codec drivers. In general soundwire stream prepare/enable/disable can be called from either codec/machine/controller driver. However calling it in codec driver means that if multiple instances(Left/Right speakers) of the same codec is connected to the same stream then it will endup calling stream prepare/enable/disable more than once. This will mess up the stream state-machine checks in the soundwire core. Moving this stream handling to machine driver would fix this issue and also allow board/platform specfic power sequencing. Changes since v1: - removed false error check while setting sruntime. Srinivas Kandagatla (2): ASoC: qcom: sdm845: handle soundwire stream ASoC: codecs: wsa881x: remove soundwire stream handling sound/soc/codecs/wsa881x.c | 44 +------------------------ sound/soc/qcom/Kconfig | 2 +- sound/soc/qcom/sdm845.c | 67 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 44 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream 2020-03-17 15:12 [PATCH v2 0/2] ASoC: sdm845: fix soundwire stream handling Srinivas Kandagatla @ 2020-03-17 15:12 ` Srinivas Kandagatla 2020-03-18 21:41 ` Applied "ASoC: qcom: sdm845: handle soundwire stream" to the asoc tree Mark Brown 2020-03-17 15:12 ` [PATCH v2 2/2] ASoC: codecs: wsa881x: remove soundwire stream handling Srinivas Kandagatla 1 sibling, 1 reply; 4+ messages in thread From: Srinivas Kandagatla @ 2020-03-17 15:12 UTC (permalink / raw) To: broonie Cc: alsa-devel, lgirdwood, perex, linux-kernel, pierre-louis.bossart, vkoul, Srinivas Kandagatla In existing setup WSA881x codec handles soundwire stream, however DB845c and other machines based on SDM845c have 2 instances for WSA881x codec. This will force soundwire stream to be prepared/enabled twice or multiple times. Handling SoundWire Stream in machine driver would fix this issue. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/qcom/Kconfig | 2 +- sound/soc/qcom/sdm845.c | 67 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 6530d2462a9e..f51b28d1b94d 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -99,7 +99,7 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" - depends on QCOM_APR && CROS_EC && I2C + depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON select SND_SOC_RT5663 diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 3ac02204a706..67a55edf755f 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -11,6 +11,7 @@ #include <sound/pcm_params.h> #include <sound/jack.h> #include <sound/soc.h> +#include <linux/soundwire/sdw.h> #include <uapi/linux/input-event-codes.h> #include "common.h" #include "qdsp6/q6afe.h" @@ -31,10 +32,12 @@ struct sdm845_snd_data { struct snd_soc_jack jack; bool jack_setup; + bool stream_prepared[SLIM_MAX_RX_PORTS]; struct snd_soc_card *card; uint32_t pri_mi2s_clk_count; uint32_t sec_mi2s_clk_count; uint32_t quat_tdm_clk_count; + struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS]; }; static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28}; @@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai; + struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card); u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS]; + struct sdw_stream_runtime *sruntime; u32 rx_ch_cnt = 0, tx_ch_cnt = 0; int ret = 0, i; for_each_rtd_codec_dais(rtd, i, codec_dai) { + sruntime = snd_soc_dai_get_sdw_stream(codec_dai, + substream->stream); + if (sruntime != ERR_PTR(-ENOTSUPP)) + pdata->sruntime[cpu_dai->id] = sruntime; + ret = snd_soc_dai_get_channel_map(codec_dai, &tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch); @@ -425,8 +435,65 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream) } } +static int sdm845_snd_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + int ret; + + if (!sruntime) + return 0; + + if (data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + ret = sdw_prepare_stream(sruntime); + if (ret) + return ret; + + /** + * NOTE: there is a strict hw requirement about the ordering of port + * enables and actual WSA881x PA enable. PA enable should only happen + * after soundwire ports are enabled if not DC on the line is + * accumulated resulting in Click/Pop Noise + * PA enable/mute are handled as part of codec DAPM and digital mute. + */ + + ret = sdw_enable_stream(sruntime); + if (ret) { + sdw_deprepare_stream(sruntime); + return ret; + } + data->stream_prepared[cpu_dai->id] = true; + + return ret; +} + +static int sdm845_snd_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + if (sruntime && data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + return 0; +} + static const struct snd_soc_ops sdm845_be_ops = { .hw_params = sdm845_snd_hw_params, + .hw_free = sdm845_snd_hw_free, + .prepare = sdm845_snd_prepare, .startup = sdm845_snd_startup, .shutdown = sdm845_snd_shutdown, }; -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "ASoC: qcom: sdm845: handle soundwire stream" to the asoc tree 2020-03-17 15:12 ` [PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream Srinivas Kandagatla @ 2020-03-18 21:41 ` Mark Brown 0 siblings, 0 replies; 4+ messages in thread From: Mark Brown @ 2020-03-18 21:41 UTC (permalink / raw) To: Srinivas Kandagatla Cc: alsa-devel, broonie, lgirdwood, linux-kernel, Mark Brown, pierre-louis.bossart, vkoul The patch ASoC: qcom: sdm845: handle soundwire stream has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark From 1b93a88431470ea0b943157999084d9c7e6e3bd3 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Date: Tue, 17 Mar 2020 15:12:32 +0000 Subject: [PATCH] ASoC: qcom: sdm845: handle soundwire stream In existing setup WSA881x codec handles soundwire stream, however DB845c and other machines based on SDM845c have 2 instances for WSA881x codec. This will force soundwire stream to be prepared/enabled twice or multiple times. Handling SoundWire Stream in machine driver would fix this issue. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> --- sound/soc/qcom/Kconfig | 2 +- sound/soc/qcom/sdm845.c | 67 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 6530d2462a9e..f51b28d1b94d 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -99,7 +99,7 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" - depends on QCOM_APR && CROS_EC && I2C + depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON select SND_SOC_RT5663 diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 3ac02204a706..67a55edf755f 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -11,6 +11,7 @@ #include <sound/pcm_params.h> #include <sound/jack.h> #include <sound/soc.h> +#include <linux/soundwire/sdw.h> #include <uapi/linux/input-event-codes.h> #include "common.h" #include "qdsp6/q6afe.h" @@ -31,10 +32,12 @@ struct sdm845_snd_data { struct snd_soc_jack jack; bool jack_setup; + bool stream_prepared[SLIM_MAX_RX_PORTS]; struct snd_soc_card *card; uint32_t pri_mi2s_clk_count; uint32_t sec_mi2s_clk_count; uint32_t quat_tdm_clk_count; + struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS]; }; static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28}; @@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai; + struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card); u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS]; + struct sdw_stream_runtime *sruntime; u32 rx_ch_cnt = 0, tx_ch_cnt = 0; int ret = 0, i; for_each_rtd_codec_dais(rtd, i, codec_dai) { + sruntime = snd_soc_dai_get_sdw_stream(codec_dai, + substream->stream); + if (sruntime != ERR_PTR(-ENOTSUPP)) + pdata->sruntime[cpu_dai->id] = sruntime; + ret = snd_soc_dai_get_channel_map(codec_dai, &tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch); @@ -425,8 +435,65 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream) } } +static int sdm845_snd_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + int ret; + + if (!sruntime) + return 0; + + if (data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + ret = sdw_prepare_stream(sruntime); + if (ret) + return ret; + + /** + * NOTE: there is a strict hw requirement about the ordering of port + * enables and actual WSA881x PA enable. PA enable should only happen + * after soundwire ports are enabled if not DC on the line is + * accumulated resulting in Click/Pop Noise + * PA enable/mute are handled as part of codec DAPM and digital mute. + */ + + ret = sdw_enable_stream(sruntime); + if (ret) { + sdw_deprepare_stream(sruntime); + return ret; + } + data->stream_prepared[cpu_dai->id] = true; + + return ret; +} + +static int sdm845_snd_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + if (sruntime && data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + return 0; +} + static const struct snd_soc_ops sdm845_be_ops = { .hw_params = sdm845_snd_hw_params, + .hw_free = sdm845_snd_hw_free, + .prepare = sdm845_snd_prepare, .startup = sdm845_snd_startup, .shutdown = sdm845_snd_shutdown, }; -- 2.20.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] ASoC: codecs: wsa881x: remove soundwire stream handling 2020-03-17 15:12 [PATCH v2 0/2] ASoC: sdm845: fix soundwire stream handling Srinivas Kandagatla 2020-03-17 15:12 ` [PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream Srinivas Kandagatla @ 2020-03-17 15:12 ` Srinivas Kandagatla 1 sibling, 0 replies; 4+ messages in thread From: Srinivas Kandagatla @ 2020-03-17 15:12 UTC (permalink / raw) To: broonie Cc: alsa-devel, lgirdwood, perex, linux-kernel, pierre-louis.bossart, vkoul, Srinivas Kandagatla There could be multiple instances of this codec on any platform, so handling stream directly in this codec driver can lead to multiple calls to prepare/enable/disable on the same SoundWire stream. Move this stream handling to machine driver to fix this issue. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/codecs/wsa881x.c | 44 +------------------------------------- 1 file changed, 1 insertion(+), 43 deletions(-) diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index 1810e0775efe..d39d479e2378 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -680,7 +680,6 @@ struct wsa881x_priv { int active_ports; bool port_prepared[WSA881X_MAX_SWR_PORTS]; bool port_enable[WSA881X_MAX_SWR_PORTS]; - bool stream_prepared; }; static void wsa881x_init(struct wsa881x_priv *wsa881x) @@ -958,41 +957,6 @@ static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("SPKR"), }; -static int wsa881x_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev); - int ret; - - if (wsa881x->stream_prepared) { - sdw_disable_stream(wsa881x->sruntime); - sdw_deprepare_stream(wsa881x->sruntime); - wsa881x->stream_prepared = false; - } - - - ret = sdw_prepare_stream(wsa881x->sruntime); - if (ret) - return ret; - - /** - * NOTE: there is a strict hw requirement about the ordering of port - * enables and actual PA enable. PA enable should only happen after - * soundwire ports are enabled if not DC on the line is accumulated - * resulting in Click/Pop Noise - * PA enable/mute are handled as part of DAPM and digital mute. - */ - - ret = sdw_enable_stream(wsa881x->sruntime); - if (ret) { - sdw_deprepare_stream(wsa881x->sruntime); - return ret; - } - wsa881x->stream_prepared = true; - - return ret; -} - static int wsa881x_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -1020,12 +984,7 @@ static int wsa881x_hw_free(struct snd_pcm_substream *substream, { struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev); - if (wsa881x->stream_prepared) { - sdw_disable_stream(wsa881x->sruntime); - sdw_deprepare_stream(wsa881x->sruntime); - sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime); - wsa881x->stream_prepared = false; - } + sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime); return 0; } @@ -1056,7 +1015,6 @@ static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream) static struct snd_soc_dai_ops wsa881x_dai_ops = { .hw_params = wsa881x_hw_params, - .prepare = wsa881x_prepare, .hw_free = wsa881x_hw_free, .mute_stream = wsa881x_digital_mute, .set_sdw_stream = wsa881x_set_sdw_stream, -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-18 21:41 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-03-17 15:12 [PATCH v2 0/2] ASoC: sdm845: fix soundwire stream handling Srinivas Kandagatla 2020-03-17 15:12 ` [PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream Srinivas Kandagatla 2020-03-18 21:41 ` Applied "ASoC: qcom: sdm845: handle soundwire stream" to the asoc tree Mark Brown 2020-03-17 15:12 ` [PATCH v2 2/2] ASoC: codecs: wsa881x: remove soundwire stream handling Srinivas Kandagatla
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).