[PATCH AUTOSEL 4.19 01/37] cgroup-v1: cgroup_pidlist_next should update position index

[PATCH AUTOSEL 4.19 01/37] cgroup-v1: cgroup_pidlist_next should update position index

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit db8dd9697238be70a6b4f9d0284cd89f59c0e070 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

 # mount | grep cgroup
 # dd if=/mnt/cgroup.procs bs=1  # normal output
...
1294
1295
1296
1304
1382
584+0 records in
584+0 records out
584 bytes copied

dd: /mnt/cgroup.procs: cannot skip to specified offset
83  <<< generates end of last line
1383  <<< ... and whole last line once again
0+1 records in
0+1 records out
8 bytes copied

dd: /mnt/cgroup.procs: cannot skip to specified offset
1386  <<< generates last line anyway
0+1 records in
0+1 records out
5 bytes copied

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/cgroup-v1.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index 51063e7a93c28..c9628b9a41d23 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -501,6 +501,7 @@ static void *cgroup_pidlist_next(struct seq_file *s, void *v, loff_t *pos)
 	 */
 	p++;
 	if (p >= end) {
+		(*pos)++;
 		return NULL;
 	} else {
 		*pos = *p;
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/37] cgroup: Iterate tasks that did not finish do_exit()

[Sasha Levin]

From: Michal Koutný <mkoutny@suse.com>

[ Upstream commit 9c974c77246460fa6a92c18554c3311c8c83c160 ]

PF_EXITING is set earlier than actual removal from css_set when a task
is exitting. This can confuse cgroup.procs readers who see no PF_EXITING
tasks, however, rmdir is checking against css_set membership so it can
transitionally fail with EBUSY.

Fix this by listing tasks that weren't unlinked from css_set active
lists.
It may happen that other users of the task iterator (without
CSS_TASK_ITER_PROCS) spot a PF_EXITING task before cgroup_exit(). This
is equal to the state before commit c03cd7738a83 ("cgroup: Include dying
leaders with live threads in PROCS iterations") but it may be reviewed
later.

Reported-by: Suren Baghdasaryan <surenb@google.com>
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/cgroup.h |  1 +
 kernel/cgroup/cgroup.c | 23 ++++++++++++++++-------
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index b4854b48a4f3d..5ed1a2b285cdd 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -62,6 +62,7 @@ struct css_task_iter {
 	struct list_head		*mg_tasks_head;
 	struct list_head		*dying_tasks_head;
 
+	struct list_head		*cur_tasks_head;
 	struct css_set			*cur_cset;
 	struct css_set			*cur_dcset;
 	struct task_struct		*cur_task;
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 08bd40d900660..c416ef3e34797 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -4157,12 +4157,16 @@ static void css_task_iter_advance_css_set(struct css_task_iter *it)
 		}
 	} while (!css_set_populated(cset) && list_empty(&cset->dying_tasks));
 
-	if (!list_empty(&cset->tasks))
+	if (!list_empty(&cset->tasks)) {
 		it->task_pos = cset->tasks.next;
-	else if (!list_empty(&cset->mg_tasks))
+		it->cur_tasks_head = &cset->tasks;
+	} else if (!list_empty(&cset->mg_tasks)) {
 		it->task_pos = cset->mg_tasks.next;
-	else
+		it->cur_tasks_head = &cset->mg_tasks;
+	} else {
 		it->task_pos = cset->dying_tasks.next;
+		it->cur_tasks_head = &cset->dying_tasks;
+	}
 
 	it->tasks_head = &cset->tasks;
 	it->mg_tasks_head = &cset->mg_tasks;
@@ -4220,10 +4224,14 @@ static void css_task_iter_advance(struct css_task_iter *it)
 		else
 			it->task_pos = it->task_pos->next;
 
-		if (it->task_pos == it->tasks_head)
+		if (it->task_pos == it->tasks_head) {
 			it->task_pos = it->mg_tasks_head->next;
-		if (it->task_pos == it->mg_tasks_head)
+			it->cur_tasks_head = it->mg_tasks_head;
+		}
+		if (it->task_pos == it->mg_tasks_head) {
 			it->task_pos = it->dying_tasks_head->next;
+			it->cur_tasks_head = it->dying_tasks_head;
+		}
 		if (it->task_pos == it->dying_tasks_head)
 			css_task_iter_advance_css_set(it);
 	} else {
@@ -4242,11 +4250,12 @@ static void css_task_iter_advance(struct css_task_iter *it)
 			goto repeat;
 
 		/* and dying leaders w/o live member threads */
-		if (!atomic_read(&task->signal->live))
+		if (it->cur_tasks_head == it->dying_tasks_head &&
+		    !atomic_read(&task->signal->live))
 			goto repeat;
 	} else {
 		/* skip all dying ones */
-		if (task->flags & PF_EXITING)
+		if (it->cur_tasks_head == it->dying_tasks_head)
 			goto repeat;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 03/37] batman-adv: Don't schedule OGM for disabled interface

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 8e8ce08198de193e3d21d42e96945216e3d9ac7f ]

A transmission scheduling for an interface which is currently dropped by
batadv_iv_ogm_iface_disable could still be in progress. The B.A.T.M.A.N. V
is simply cancelling the workqueue item in an synchronous way but this is
not possible with B.A.T.M.A.N. IV because the OGM submissions are
intertwined.

Instead it has to stop submitting the OGM when it detect that the buffer
pointer is set to NULL.

Reported-by: syzbot+a98f2016f40b9cd3818a@syzkaller.appspotmail.com
Reported-by: syzbot+ac36b6a33c28a491e929@syzkaller.appspotmail.com
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_iv_ogm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index f5941837c3ad4..0b052ff51bdeb 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -970,6 +970,10 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface)
 
 	lockdep_assert_held(&hard_iface->bat_iv.ogm_buff_mutex);
 
+	/* interface already disabled by batadv_iv_ogm_iface_disable */
+	if (!*ogm_buff)
+		return;
+
 	/* the interface gets activated here to avoid race conditions between
 	 * the moment of activating the interface in
 	 * hardif_activate_interface() where the originator mac is set and
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/37] pinctrl: meson-gxl: fix GPIOX sdio pins

[Sasha Levin]

From: Nicolas Belin <nbelin@baylibre.com>

[ Upstream commit dc7a06b0dbbafac8623c2b7657e61362f2f479a7 ]

In the gxl driver, the sdio cmd and clk pins are inverted. It has not caused
any issue so far because devices using these pins always take both pins
so the resulting configuration is OK.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Link: https://lore.kernel.org/r/1582204512-7582-1-git-send-email-nbelin@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 0c0a5018102b0..22ddb238e17c5 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -153,8 +153,8 @@ static const unsigned int sdio_d0_pins[]	= { GPIOX_0 };
 static const unsigned int sdio_d1_pins[]	= { GPIOX_1 };
 static const unsigned int sdio_d2_pins[]	= { GPIOX_2 };
 static const unsigned int sdio_d3_pins[]	= { GPIOX_3 };
-static const unsigned int sdio_cmd_pins[]	= { GPIOX_4 };
-static const unsigned int sdio_clk_pins[]	= { GPIOX_5 };
+static const unsigned int sdio_clk_pins[]	= { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[]	= { GPIOX_5 };
 static const unsigned int sdio_irq_pins[]	= { GPIOX_7 };
 
 static const unsigned int nand_ce0_pins[]	= { BOOT_8 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/37] nfs: add minor version to nfs_server_key for fscache

[Sasha Levin]

From: Scott Mayhew <smayhew@redhat.com>

[ Upstream commit 55dee1bc0d72877b99805e42e0205087e98b9edd ]

An NFS client that mounts multiple exports from the same NFS
server with higher NFSv4 versions disabled (i.e. 4.2) and without
forcing a specific NFS version results in fscache index cookie
collisions and the following messages:
[  570.004348] FS-Cache: Duplicate cookie detected

Each nfs_client structure should have its own fscache index cookie,
so add the minorversion to nfs_server_key.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/client.c     | 1 +
 fs/nfs/fscache.c    | 2 ++
 fs/nfs/nfs4client.c | 1 -
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 0a2b59c1ecb3d..07c5ddd5d6d50 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -157,6 +157,7 @@ struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_init)
 	if ((clp = kzalloc(sizeof(*clp), GFP_KERNEL)) == NULL)
 		goto error_0;
 
+	clp->cl_minorversion = cl_init->minorversion;
 	clp->cl_nfs_mod = cl_init->nfs_mod;
 	if (!try_module_get(clp->cl_nfs_mod->owner))
 		goto error_dealloc;
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index a7bc4e0494f92..6f45b1a957397 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -35,6 +35,7 @@ static DEFINE_SPINLOCK(nfs_fscache_keys_lock);
 struct nfs_server_key {
 	struct {
 		uint16_t	nfsversion;		/* NFS protocol version */
+		uint32_t	minorversion;		/* NFSv4 minor version */
 		uint16_t	family;			/* address family */
 		__be16		port;			/* IP port */
 	} hdr;
@@ -59,6 +60,7 @@ void nfs_fscache_get_client_cookie(struct nfs_client *clp)
 
 	memset(&key, 0, sizeof(key));
 	key.hdr.nfsversion = clp->rpc_ops->version;
+	key.hdr.minorversion = clp->cl_minorversion;
 	key.hdr.family = clp->cl_addr.ss_family;
 
 	switch (clp->cl_addr.ss_family) {
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 86991bcfbeb12..faaabbedc891d 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -210,7 +210,6 @@ struct nfs_client *nfs4_alloc_client(const struct nfs_client_initdata *cl_init)
 	INIT_LIST_HEAD(&clp->cl_ds_clients);
 	rpc_init_wait_queue(&clp->cl_rpcwaitq, "NFS client");
 	clp->cl_state = 1 << NFS4CLNT_LEASE_EXPIRED;
-	clp->cl_minorversion = cl_init->minorversion;
 	clp->cl_mvops = nfs_v4_minor_ops[cl_init->minorversion];
 	clp->cl_mig_gen = 1;
 #if IS_ENABLED(CONFIG_NFS_V4_1)
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/37] pinctrl: core: Remove extra kref_get which blocks hogs being freed

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit aafd56fc79041bf36f97712d4b35208cbe07db90 ]

kref_init starts with the reference count at 1, which will be balanced
by the pinctrl_put in pinctrl_unregister. The additional kref_get in
pinctrl_claim_hogs will increase this count to 2 and cause the hogs to
not get freed when pinctrl_unregister is called.

Fixes: 6118714275f0 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228154142.13860-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index c6ff4d5fa482e..76638dee65d94 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -2008,7 +2008,6 @@ static int pinctrl_claim_hogs(struct pinctrl_dev *pctldev)
 		return PTR_ERR(pctldev->p);
 	}
 
-	kref_get(&pctldev->p->users);
 	pctldev->hog_default =
 		pinctrl_lookup_state(pctldev->p, PINCTRL_STATE_DEFAULT);
 	if (IS_ERR(pctldev->hog_default)) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 07/37] r8152: check disconnect status after long sleep

[Sasha Levin]

From: You-Sheng Yang <vicamo.yang@canonical.com>

[ Upstream commit d64c7a08034b32c285e576208ae44fc3ba3fa7df ]

Dell USB Type C docking WD19/WD19DC attaches additional peripherals as:

  /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
      |__ Port 1: Dev 11, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 3: Dev 12, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 4: Dev 13, If 0, Class=Vendor Specific Class,
              Driver=r8152, 5000M

where usb 2-1-3 is a hub connecting all USB Type-A/C ports on the dock.

When hotplugging such dock with additional usb devices already attached on
it, the probing process may reset usb 2.1 port, therefore r8152 ethernet
device is also reset. However, during r8152 device init there are several
for-loops that, when it's unable to retrieve hardware registers due to
being disconnected from USB, may take up to 14 seconds each in practice,
and that has to be completed before USB may re-enumerate devices on the
bus. As a result, devices attached to the dock will only be available
after nearly 1 minute after the dock was plugged in:

  [ 216.388290] [250] r8152 2-1.4:1.0: usb_probe_interface
  [ 216.388292] [250] r8152 2-1.4:1.0: usb_probe_interface - got id
  [ 258.830410] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): PHY not ready
  [ 258.830460] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Invalid header when reading pass-thru MAC addr
  [ 258.830464] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Get ether addr fail

This happens in, for example, r8153_init:

  static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
			    void *data, u16 type)
  {
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return -ENODEV;
    ...
  }

  static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
  {
    u32 data;
    ...
    generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen);

    data = __le32_to_cpu(tmp);
    ...
    return (u16)data;
  }

  static void r8153_init(struct r8152 *tp)
  {
    ...
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return;

    for (i = 0; i < 500; i++) {
      if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
          AUTOLOAD_DONE)
        break;
      msleep(20);
    }
    ...
  }

Since ocp_read_word() doesn't check the return status of
generic_ocp_read(), and the only exit condition for the loop is to have
a match in the returned value, such loops will only ends after exceeding
its maximum runs when the device has been marked as disconnected, which
takes 500 * 20ms = 10 seconds in theory, 14 in practice.

To solve this long latency another test to RTL8152_UNPLUG flag should be
added after those 20ms sleep to skip unnecessary loops, so that the device
probe can complete early and proceed to parent port reset/reprobe process.

This can be reproduced on all kernel versions up to latest v5.6-rc2, but
after v5.5-rc7 the reproduce rate is dramatically lowered to 1/30 or less
while it was around 1/2.

Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c5c188dc66268..0639178cb0096 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2701,6 +2701,8 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
 		}
 
 		msleep(20);
+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+			break;
 	}
 
 	return data;
@@ -4062,7 +4064,10 @@ static void r8153_init(struct r8152 *tp)
 		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 		    AUTOLOAD_DONE)
 			break;
+
 		msleep(20);
+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+			break;
 	}
 
 	data = r8153_phy_status(tp, 0);
@@ -4180,7 +4185,10 @@ static void r8153b_init(struct r8152 *tp)
 		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
 		    AUTOLOAD_DONE)
 			break;
+
 		msleep(20);
+		if (test_bit(RTL8152_UNPLUG, &tp->flags))
+			break;
 	}
 
 	data = r8153_phy_status(tp, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/37] bnxt_en: reinitialize IRQs when MTU is modified

[Sasha Levin]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit a9b952d267e59a3b405e644930f46d252cea7122 ]

MTU changes may affect the number of IRQs so we must call
bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter
set to true.  The reason is that a larger MTU may require
aggregation rings not needed with smaller MTU.  We may not be
able to allocate the required number of aggregation rings and
so we reduce the number of channels which will change the number
of IRQs.  Without this patch, it may crash eventually in
pci_disable_msix() when the IRQs are not properly unwound.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c19d0eabeb526..911cea2e5aa58 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8097,13 +8097,13 @@ static int bnxt_change_mtu(struct net_device *dev, int new_mtu)
 	struct bnxt *bp = netdev_priv(dev);
 
 	if (netif_running(dev))
-		bnxt_close_nic(bp, false, false);
+		bnxt_close_nic(bp, true, false);
 
 	dev->mtu = new_mtu;
 	bnxt_set_ring_params(bp);
 
 	if (netif_running(dev))
-		return bnxt_open_nic(bp, false, false);
+		return bnxt_open_nic(bp, true, false);
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/37] cpupower: avoid multiple definition with gcc -fno-common

[Sasha Levin]

From: Mike Gilbert <floppym@gentoo.org>

[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]

Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.

./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here

The -fno-common option will be enabled by default in GCC 10.

Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c  | 2 +-
 tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c    | 2 +-
 tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 ++
 tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
 4 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
index 2116df9ad8325..c097a3748674f 100644
--- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
@@ -83,7 +83,7 @@ static struct pci_access *pci_acc;
 static struct pci_dev *amd_fam14h_pci_dev;
 static int nbp1_entered;
 
-struct timespec start_time;
+static struct timespec start_time;
 static unsigned long long timediff;
 
 #ifdef DEBUG
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index 5b8c4956ff9a1..85a8f0cc01a19 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -21,7 +21,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor;
 
 static unsigned long long **previous_count;
 static unsigned long long **current_count;
-struct timespec start_time;
+static struct timespec start_time;
 static unsigned long long timediff;
 
 static int cpuidle_get_count_percent(unsigned int id, double *percent,
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index 051da0a7c4548..4a27c55d50d80 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -29,6 +29,8 @@ struct cpuidle_monitor *all_monitors[] = {
 0
 };
 
+int cpu_count;
+
 static struct cpuidle_monitor *monitors[MONITORS_MAX];
 static unsigned int avail_monitors;
 
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
index 2ae50b499e0a6..06b3cd6de0180 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -27,7 +27,7 @@
 #endif
 #define CSTATE_DESC_LEN 60
 
-int cpu_count;
+extern int cpu_count;
 
 /* Hard to define the right names ...: */
 enum power_range_e {
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/37] fib: add missing attribute validation for tun_id

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 4c16d64ea04056f1b1b324ab6916019f6a064114 ]

Add missing netlink policy entry for FRA_TUN_ID.

Fixes: e7030878fc84 ("fib: Add fib rule match on tunnel id")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/fib_rules.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index b473df5b95121..10886c19cfc58 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -107,6 +107,7 @@ struct fib_rule_notifier_info {
 	[FRA_OIFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
 	[FRA_PRIORITY]	= { .type = NLA_U32 }, \
 	[FRA_FWMARK]	= { .type = NLA_U32 }, \
+	[FRA_TUN_ID]	= { .type = NLA_U64 }, \
 	[FRA_FWMASK]	= { .type = NLA_U32 }, \
 	[FRA_TABLE]     = { .type = NLA_U32 }, \
 	[FRA_SUPPRESS_PREFIXLEN] = { .type = NLA_U32 }, \
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/37] can: add missing attribute validation for termination

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit ab02ad660586b94f5d08912a3952b939cf4c4430 ]

Add missing attribute validation for IFLA_CAN_TERMINATION
to the netlink policy.

Fixes: 12a6075cabc0 ("can: dev: add CAN interface termination API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 49b853f53f595..1545f2b299d06 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -892,6 +892,7 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
 				= { .len = sizeof(struct can_bittiming) },
 	[IFLA_CAN_DATA_BITTIMING_CONST]
 				= { .len = sizeof(struct can_bittiming_const) },
+	[IFLA_CAN_TERMINATION]	= { .type = NLA_U16 },
 };
 
 static int can_validate(struct nlattr *tb[], struct nlattr *data[],
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/37] macsec: add missing attribute validation for port

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 31d9a1c524964bac77b7f9d0a1ac140dc6b57461 ]

Add missing attribute validation for IFLA_MACSEC_PORT
to the netlink policy.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 10a8ef2d025a1..f7a6a82c9a551 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2989,6 +2989,7 @@ static const struct device_type macsec_type = {
 
 static const struct nla_policy macsec_rtnl_policy[IFLA_MACSEC_MAX + 1] = {
 	[IFLA_MACSEC_SCI] = { .type = NLA_U64 },
+	[IFLA_MACSEC_PORT] = { .type = NLA_U16 },
 	[IFLA_MACSEC_ICV_LEN] = { .type = NLA_U8 },
 	[IFLA_MACSEC_CIPHER_SUITE] = { .type = NLA_U64 },
 	[IFLA_MACSEC_WINDOW] = { .type = NLA_U32 },
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/37] team: add missing attribute validation for port ifindex

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit dd25cb272ccce4db67dc8509278229099e4f5e99 ]

Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX
to the netlink policy.

Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 3feb49badda9c..472641b5afd3e 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2215,6 +2215,7 @@ team_nl_option_policy[TEAM_ATTR_OPTION_MAX + 1] = {
 	[TEAM_ATTR_OPTION_CHANGED]		= { .type = NLA_FLAG },
 	[TEAM_ATTR_OPTION_TYPE]			= { .type = NLA_U8 },
 	[TEAM_ATTR_OPTION_DATA]			= { .type = NLA_BINARY },
+	[TEAM_ATTR_OPTION_PORT_IFINDEX]		= { .type = NLA_U32 },
 };
 
 static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info)
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/37] team: add missing attribute validation for array index

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 669fcd7795900cd1880237cbbb57a7db66cb9ac8 ]

Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX
to the netlink policy.

Fixes: b13033262d24 ("team: introduce array options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 472641b5afd3e..95524c06e64c2 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2216,6 +2216,7 @@ team_nl_option_policy[TEAM_ATTR_OPTION_MAX + 1] = {
 	[TEAM_ATTR_OPTION_TYPE]			= { .type = NLA_U8 },
 	[TEAM_ATTR_OPTION_DATA]			= { .type = NLA_BINARY },
 	[TEAM_ATTR_OPTION_PORT_IFINDEX]		= { .type = NLA_U32 },
+	[TEAM_ATTR_OPTION_ARRAY_INDEX]		= { .type = NLA_U32 },
 };
 
 static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info)
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/37] netfilter: cthelper: add missing attribute validation for cthelper

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit c049b3450072b8e3998053490e025839fecfef31 ]

Add missing attribute validation for cthelper
to the netlink policy.

Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink_cthelper.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index e5d27b2e4ebac..66154dafa305b 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -744,6 +744,8 @@ static const struct nla_policy nfnl_cthelper_policy[NFCTH_MAX+1] = {
 	[NFCTH_NAME] = { .type = NLA_NUL_STRING,
 			 .len = NF_CT_HELPER_NAME_LEN-1 },
 	[NFCTH_QUEUE_NUM] = { .type = NLA_U32, },
+	[NFCTH_PRIV_DATA_LEN] = { .type = NLA_U32, },
+	[NFCTH_STATUS] = { .type = NLA_U32, },
 };
 
 static const struct nfnl_callback nfnl_cthelper_cb[NFNL_MSG_CTHELPER_MAX] = {
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/37] netfilter: nft_payload: add missing attribute validation for payload csum flags

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 9d6effb2f1523eb84516e44213c00f2fd9e6afff ]

Add missing attribute validation for NFTA_PAYLOAD_CSUM_FLAGS
to the netlink policy.

Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_payload.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index e110b0ebbf58b..19446a89a2a81 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -121,6 +121,7 @@ static const struct nla_policy nft_payload_policy[NFTA_PAYLOAD_MAX + 1] = {
 	[NFTA_PAYLOAD_LEN]		= { .type = NLA_U32 },
 	[NFTA_PAYLOAD_CSUM_TYPE]	= { .type = NLA_U32 },
 	[NFTA_PAYLOAD_CSUM_OFFSET]	= { .type = NLA_U32 },
+	[NFTA_PAYLOAD_CSUM_FLAGS]	= { .type = NLA_U32 },
 };
 
 static int nft_payload_init(const struct nft_ctx *ctx,
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/37] netfilter: nft_tunnel: add missing attribute validation for tunnels

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 88a637719a1570705c02cacb3297af164b1714e7 ]

Add missing attribute validation for tunnel source and
destination ports to the netlink policy.

Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_tunnel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/netfilter/nft_tunnel.c b/net/netfilter/nft_tunnel.c
index 1c6d15ea76d4a..8ae948fd9dcfc 100644
--- a/net/netfilter/nft_tunnel.c
+++ b/net/netfilter/nft_tunnel.c
@@ -308,6 +308,8 @@ static const struct nla_policy nft_tunnel_key_policy[NFTA_TUNNEL_KEY_MAX + 1] =
 	[NFTA_TUNNEL_KEY_FLAGS]	= { .type = NLA_U32, },
 	[NFTA_TUNNEL_KEY_TOS]	= { .type = NLA_U8, },
 	[NFTA_TUNNEL_KEY_TTL]	= { .type = NLA_U8, },
+	[NFTA_TUNNEL_KEY_SPORT]	= { .type = NLA_U16, },
+	[NFTA_TUNNEL_KEY_DPORT]	= { .type = NLA_U16, },
 	[NFTA_TUNNEL_KEY_OPTS]	= { .type = NLA_NESTED, },
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/37] drivers/of/of_mdio.c:fix of_mdiobus_register()

[Sasha Levin]

From: Dajun Jin <adajunjin@gmail.com>

[ Upstream commit 209c65b61d94344522c41a83cd6ce51aac5fd0a4 ]

When registers a phy_device successful, should terminate the loop
or the phy_device would be registered in other addr. If there are
multiple PHYs without reg properties, it will go wrong.

Signed-off-by: Dajun Jin <adajunjin@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/of_mdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 7d2bc22680d90..af7572fe090fd 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -270,6 +270,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 				rc = of_mdiobus_register_phy(mdio, child, addr);
 				if (rc && rc != -ENODEV)
 					goto unregister;
+				break;
 			}
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/37] cgroup1: don't call release_agent when it is ""

[Sasha Levin]

From: Tycho Andersen <tycho@tycho.ws>

[ Upstream commit 2e5383d7904e60529136727e49629a82058a5607 ]

Older (and maybe current) versions of systemd set release_agent to "" when
shutting down, but do not set notify_on_release to 0.

Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()"), we filter out such calls when the user mode helper
path is "". However, when used in conjunction with an actual (i.e. non "")
STATIC_USERMODEHELPER, the path is never "", so the real usermode helper
will be called with argv[0] == "".

Let's avoid this by not invoking the release_agent when it is "".

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/cgroup-v1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index c9628b9a41d23..dd8bdbfbbde1e 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -812,7 +812,7 @@ void cgroup1_release_agent(struct work_struct *work)
 
 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
 	agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
-	if (!pathbuf || !agentbuf)
+	if (!pathbuf || !agentbuf || !strlen(agentbuf))
 		goto out;
 
 	spin_lock_irq(&css_set_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/37] dt-bindings: net: FMan erratum A050385

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ]

FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.

The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:

  1. FMAN AXI transaction crosses 4K address boundary (Errata
     A010022)
  2. FMAN DMA address for an AXI transaction is not 16 byte
     aligned, i.e. the last 4 bits of an address are non-zero
  3. Scatter Gather (SG) frames have more than one SG buffer in
     the SG list and any one of the buffers, except the last
     buffer in the SG list has data size that is not a multiple
     of 16 bytes, i.e., other than 16, 32, 48, 64, etc.

With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.

To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:

  1. Frame buffers must not span a 4KB address boundary, unless
     the frame start address is 256 byte aligned
  2. All FMAN DMA start addresses (for example, BMAN buffer
     address, FD[address] + FD[offset]) are 16B aligned
  3. SG table and buffer addresses are 16B aligned and the size
     of SG buffers are multiple of 16 bytes, except for the last
     SG buffer that can be of any size.

Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
  1. Large single buffer frames that span a 4KB page boundary can
     be converted into SG frames to avoid transaction splits at
     the 4KB boundary,
  2. Align the large single buffer to 256B address boundaries,
     ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/net/fsl-fman.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index 299c0dcd67db4..1316f0aec0cf3 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -110,6 +110,13 @@ PROPERTIES
 		Usage: required
 		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
 
+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
 =============================================================================
 FMan MURAM Node
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/37] arm64: dts: ls1043a: FMan erratum A050385

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit b54d3900862374e1bb2846e6b39d79c896c0b200 ]

The LS1043A SoC is affected by the A050385 erratum stating that
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak thus stopping further packet processing.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 6082ae0221364..d237162a87446 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -20,6 +20,8 @@
 };
 
 &fman0 {
+	fsl,erratum-a050385;
+
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/37] fsl/fman: detect FMan erratum A050385

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit b281f7b93b258ce1419043bbd898a29254d5c9c7 ]

Detect the presence of the A050385 erratum.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fman/Kconfig | 28 +++++++++++++++++++++
 drivers/net/ethernet/freescale/fman/fman.c  | 18 +++++++++++++
 drivers/net/ethernet/freescale/fman/fman.h  |  5 ++++
 3 files changed, 51 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig
index dc0850b3b517b..0b07ece83a2fe 100644
--- a/drivers/net/ethernet/freescale/fman/Kconfig
+++ b/drivers/net/ethernet/freescale/fman/Kconfig
@@ -7,3 +7,31 @@ config FSL_FMAN
 	help
 		Freescale Data-Path Acceleration Architecture Frame Manager
 		(FMan) support
+
+config DPAA_ERRATUM_A050385
+	bool
+	depends on ARM64 && FSL_DPAA
+	default y
+	help
+		DPAA FMan erratum A050385 software workaround implementation:
+		align buffers, data start, SG fragment length to avoid FMan DMA
+		splits.
+		FMAN DMA read or writes under heavy traffic load may cause FMAN
+		internal resource leak thus stopping further packet processing.
+		The FMAN internal queue can overflow when FMAN splits single
+		read or write transactions into multiple smaller transactions
+		such that more than 17 AXI transactions are in flight from FMAN
+		to interconnect. When the FMAN internal queue overflows, it can
+		stall further packet processing. The issue can occur with any
+		one of the following three conditions:
+		1. FMAN AXI transaction crosses 4K address boundary (Errata
+		A010022)
+		2. FMAN DMA address for an AXI transaction is not 16 byte
+		aligned, i.e. the last 4 bits of an address are non-zero
+		3. Scatter Gather (SG) frames have more than one SG buffer in
+		the SG list and any one of the buffers, except the last
+		buffer in the SG list has data size that is not a multiple
+		of 16 bytes, i.e., other than 16, 32, 48, 64, etc.
+		With any one of the above three conditions present, there is
+		likelihood of stalled FMAN packet processing, especially under
+		stress with multiple ports injecting line-rate traffic.
diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c
index e80fedb27cee8..21d8023535ae4 100644
--- a/drivers/net/ethernet/freescale/fman/fman.c
+++ b/drivers/net/ethernet/freescale/fman/fman.c
@@ -1,5 +1,6 @@
 /*
  * Copyright 2008-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -566,6 +567,10 @@ struct fman_cfg {
 	u32 qmi_def_tnums_thresh;
 };
 
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+static bool fman_has_err_a050385;
+#endif
+
 static irqreturn_t fman_exceptions(struct fman *fman,
 				   enum fman_exceptions exception)
 {
@@ -2517,6 +2522,14 @@ struct fman *fman_bind(struct device *fm_dev)
 }
 EXPORT_SYMBOL(fman_bind);
 
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+bool fman_has_errata_a050385(void)
+{
+	return fman_has_err_a050385;
+}
+EXPORT_SYMBOL(fman_has_errata_a050385);
+#endif
+
 static irqreturn_t fman_err_irq(int irq, void *handle)
 {
 	struct fman *fman = (struct fman *)handle;
@@ -2844,6 +2857,11 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
 		goto fman_free;
 	}
 
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+	fman_has_err_a050385 =
+		of_property_read_bool(fm_node, "fsl,erratum-a050385");
+#endif
+
 	return fman;
 
 fman_node_put:
diff --git a/drivers/net/ethernet/freescale/fman/fman.h b/drivers/net/ethernet/freescale/fman/fman.h
index 935c317fa6964..f2ede1360f03a 100644
--- a/drivers/net/ethernet/freescale/fman/fman.h
+++ b/drivers/net/ethernet/freescale/fman/fman.h
@@ -1,5 +1,6 @@
 /*
  * Copyright 2008-2015 Freescale Semiconductor Inc.
+ * Copyright 2020 NXP
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -398,6 +399,10 @@ u16 fman_get_max_frm(void);
 
 int fman_get_rx_extra_headroom(void);
 
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+bool fman_has_errata_a050385(void);
+#endif
+
 struct fman *fman_bind(struct device *dev);
 
 #endif /* __FM_H */
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/37] virtio-blk: fix hw_queue stopped on arbitrary error

[Sasha Levin]

From: Halil Pasic <pasic@linux.ibm.com>

[ Upstream commit f5f6b95c72f7f8bb46eace8c5306c752d0133daa ]

Since nobody else is going to restart our hw_queue for us, the
blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient
necessarily sufficient to ensure that the queue will get started again.
In case of global resource outage (-ENOMEM because mapping failure,
because of swiotlb full) our virtqueue may be empty and we can get
stuck with a stopped hw_queue.

Let us not stop the queue on arbitrary errors, but only on -EONSPC which
indicates a full virtqueue, where the hw_queue is guaranteed to get
started by virtblk_done() before when it makes sense to carry on
submitting requests. Let us also remove a stale comment.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: f7728002c1c7 ("virtio_ring: fix return code on DMA mapping fails")
Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/virtio_blk.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index dd64f586679e1..728c9a9609f0c 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -271,10 +271,12 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
 		err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg, num);
 	if (err) {
 		virtqueue_kick(vblk->vqs[qid].vq);
-		blk_mq_stop_hw_queue(hctx);
+		/* Don't stop the queue if -ENOMEM: we may have failed to
+		 * bounce the buffer due to global resource outage.
+		 */
+		if (err == -ENOSPC)
+			blk_mq_stop_hw_queue(hctx);
 		spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
-		/* Out of mem doesn't actually happen, since we fall back
-		 * to direct descriptors */
 		if (err == -ENOMEM || err == -ENOSPC)
 			return BLK_STS_DEV_RESOURCE;
 		return BLK_STS_IOERR;
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/37] ipvlan: do not add hardware address of master to its unicast filter list

[Sasha Levin]

From: Jiri Wiesner <jwiesner@suse.com>

[ Upstream commit 63aae7b17344d4b08a7d05cb07044de4c0f9dcc6 ]

There is a problem when ipvlan slaves are created on a master device that
is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not
support unicast address filtering. When an ipvlan device is brought up in
ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware
address of the vmxnet3 master device to the unicast address list of the
master device, phy_dev->uc. This inevitably leads to the vmxnet3 master
device being forced into promiscuous mode by __dev_set_rx_mode().

Promiscuous mode is switched on the master despite the fact that there is
still only one hardware address that the master device should use for
filtering in order for the ipvlan device to be able to receive packets.
The comment above struct net_device describes the uc_promisc member as a
"counter, that indicates, that promiscuous mode has been enabled due to
the need to listen to additional unicast addresses in a device that does
not implement ndo_set_rx_mode()". Moreover, the design of ipvlan
guarantees that only the hardware address of a master device,
phy_dev->dev_addr, will be used to transmit and receive all packets from
its ipvlan slaves. Thus, the unicast address list of the master device
should not be modified by ipvlan_open() and ipvlan_stop() in order to make
ipvlan a workable option on masters that do not support unicast address
filtering.

Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver")
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipvlan/ipvlan_main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index 0115a2868933c..87f605a33c37a 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -236,7 +236,6 @@ static void ipvlan_uninit(struct net_device *dev)
 static int ipvlan_open(struct net_device *dev)
 {
 	struct ipvl_dev *ipvlan = netdev_priv(dev);
-	struct net_device *phy_dev = ipvlan->phy_dev;
 	struct ipvl_addr *addr;
 
 	if (ipvlan->port->mode == IPVLAN_MODE_L3 ||
@@ -250,7 +249,7 @@ static int ipvlan_open(struct net_device *dev)
 		ipvlan_ht_addr_add(ipvlan, addr);
 	rcu_read_unlock();
 
-	return dev_uc_add(phy_dev, phy_dev->dev_addr);
+	return 0;
 }
 
 static int ipvlan_stop(struct net_device *dev)
@@ -262,8 +261,6 @@ static int ipvlan_stop(struct net_device *dev)
 	dev_uc_unsync(phy_dev, dev);
 	dev_mc_unsync(phy_dev, dev);
 
-	dev_uc_del(phy_dev, phy_dev->dev_addr);
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(addr, &ipvlan->addrs, anode)
 		ipvlan_ht_addr_del(addr);
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/37] net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used

[Sasha Levin]

From: Remi Pommarel <repk@triplefau.lt>

[ Upstream commit b723bd933980f4956dabc8a8d84b3e83be8d094c ]

ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that
there is no need to manually strip it for such packets. The enhanced DMA
descriptors allow to flag LLC packets so that the receiving callback can
use that to strip FCS manually or not. On the other hand, normal
descriptors do not support that.

Thus in order to not truncate LLC packet ACS should be disabled when
using normal DMA descriptors.

Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 21d131347e2ef..7b2a84320aabd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -34,6 +34,7 @@
 static void dwmac1000_core_init(struct mac_device_info *hw,
 				struct net_device *dev)
 {
+	struct stmmac_priv *priv = netdev_priv(dev);
 	void __iomem *ioaddr = hw->pcsr;
 	u32 value = readl(ioaddr + GMAC_CONTROL);
 	int mtu = dev->mtu;
@@ -45,7 +46,7 @@ static void dwmac1000_core_init(struct mac_device_info *hw,
 	 * Broadcom tags can look like invalid LLC/SNAP packets and cause the
 	 * hardware to truncate packets on reception.
 	 */
-	if (netdev_uses_dsa(dev))
+	if (netdev_uses_dsa(dev) || !priv->plat->enh_desc)
 		value &= ~GMAC_CONTROL_ACS;
 
 	if (mtu > 1500)
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/37] ipvlan: don't deref eth hdr before checking it's set

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit ad8192767c9f9cf97da57b9ffcea70fb100febef ]

IPvlan in L3 mode discards outbound multicast packets but performs
the check before ensuring the ether-header is set or not. This is
an error that Eric found through code browsing.

Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipvlan/ipvlan_core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 1a8132eb2a3ec..9b5aaafea1549 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -504,19 +504,21 @@ static int ipvlan_process_outbound(struct sk_buff *skb)
 	struct ethhdr *ethh = eth_hdr(skb);
 	int ret = NET_XMIT_DROP;
 
-	/* In this mode we dont care about multicast and broadcast traffic */
-	if (is_multicast_ether_addr(ethh->h_dest)) {
-		pr_debug_ratelimited("Dropped {multi|broad}cast of type=[%x]\n",
-				     ntohs(skb->protocol));
-		kfree_skb(skb);
-		goto out;
-	}
-
 	/* The ipvlan is a pseudo-L2 device, so the packets that we receive
 	 * will have L2; which need to discarded and processed further
 	 * in the net-ns of the main-device.
 	 */
 	if (skb_mac_header_was_set(skb)) {
+		/* In this mode we dont care about
+		 * multicast and broadcast traffic */
+		if (is_multicast_ether_addr(ethh->h_dest)) {
+			pr_debug_ratelimited(
+				"Dropped {multi|broad}cast of type=[%x]\n",
+				ntohs(skb->protocol));
+			kfree_skb(skb);
+			goto out;
+		}
+
 		skb_pull(skb, sizeof(*ethh));
 		skb->mac_header = (typeof(skb->mac_header))~0U;
 		skb_reset_network_header(skb);
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/37] ipvlan: add cond_resched_rcu() while processing muticast backlog

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit e18b353f102e371580f3f01dd47567a25acc3c1d ]

If there are substantial number of slaves created as simulated by
Syzbot, the backlog processing could take much longer and result
into the issue found in the Syzbot report.

INFO: rcu_sched detected stalls on CPUs/tasks:
        (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752)
All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0
syz-executor.1  R  running task on cpu   1  10984 11210   3866 0x30020008 179034491270
Call Trace:
 <IRQ>
 [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline]
 [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030
 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073
 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline]
 [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline]
 [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline]
 [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline]
 [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876
 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635
 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161
 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193
 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline]
 [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455
 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513
 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline]
 [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153
RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12
RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000
RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0
RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273
R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8
R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0
 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline]
 [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240
 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006
 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482
 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline]
 [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline]
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline]
 [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278
 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303
 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417
 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243
 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline]
 [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748
 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317
 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline]
 [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439
 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline]
 [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
 </IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102
RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12
RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000
RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005
RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000
R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000
 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548
 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline]
 [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175
 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline]
 [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415
 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f23c69
RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0
RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c
RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1
rcu_sched       R  running task on cpu   1  13048     8      2 0x90000000 179099587640
Call Trace:
 [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209
 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934
 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011
 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803
 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327
 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246
 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393

Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipvlan/ipvlan_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 9b5aaafea1549..6fe24721e4856 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -282,6 +282,7 @@ void ipvlan_process_multicast(struct work_struct *work)
 			}
 			ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true);
 			local_bh_enable();
+			cond_resched_rcu();
 		}
 		rcu_read_unlock();
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 28/37] ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit afe207d80a61e4d6e7cfa0611a4af46d0ba95628 ]

Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while
processing muticast backlog") added a cond_resched_rcu() in a loop
using rcu protection to iterate over slaves.

This is breaking rcu rules, so lets instead use cond_resched()
at a point we can reschedule

Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipvlan/ipvlan_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 6fe24721e4856..40ac60904c8dd 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -282,7 +282,6 @@ void ipvlan_process_multicast(struct work_struct *work)
 			}
 			ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true);
 			local_bh_enable();
-			cond_resched_rcu();
 		}
 		rcu_read_unlock();
 
@@ -299,6 +298,7 @@ void ipvlan_process_multicast(struct work_struct *work)
 		}
 		if (dev)
 			dev_put(dev);
+		cond_resched();
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/37] i2c: gpio: suppress error on probe defer

[Sasha Levin]

From: Hamish Martin <hamish.martin@alliedtelesis.co.nz>

[ Upstream commit 3747cd2efe7ecb9604972285ab3f60c96cb753a8 ]

If a GPIO we are trying to use is not available and we are deferring
the probe, don't output an error message.
This seems to have been the intent of commit 05c74778858d
("i2c: gpio: Add support for named gpios in DT") but the error was
still output due to not checking the updated 'retdesc'.

Fixes: 05c74778858d ("i2c: gpio: Add support for named gpios in DT")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index c008d209f0b83..87014d144ccdc 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -248,7 +248,7 @@ static struct gpio_desc *i2c_gpio_get_desc(struct device *dev,
 	if (ret == -ENOENT)
 		retdesc = ERR_PTR(-EPROBE_DEFER);
 
-	if (ret != -EPROBE_DEFER)
+	if (PTR_ERR(retdesc) != -EPROBE_DEFER)
 		dev_err(dev, "error trying to get descriptor: %d\n", ret);
 
 	return retdesc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 30/37] s390/qeth: handle error when backing RX buffer

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 17413852804d7e86e6f0576cca32c1541817800e ]

qeth_init_qdio_queues() fills the RX ring with an initial set of
RX buffers. If qeth_init_input_buffer() fails to back one of the RX
buffers with memory, we need to bail out and report the error.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d99bfbfcafb76..5f59e2dfc7db9 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2811,12 +2811,12 @@ static int qeth_init_input_buffer(struct qeth_card *card,
 		buf->rx_skb = netdev_alloc_skb(card->dev,
 					       QETH_RX_PULL_LEN + ETH_HLEN);
 		if (!buf->rx_skb)
-			return 1;
+			return -ENOMEM;
 	}
 
 	pool_entry = qeth_find_free_buffer_pool_entry(card);
 	if (!pool_entry)
-		return 1;
+		return -ENOBUFS;
 
 	/*
 	 * since the buffer is accessed only from the input_tasklet
@@ -2848,10 +2848,15 @@ int qeth_init_qdio_queues(struct qeth_card *card)
 	/* inbound queue */
 	qdio_reset_buffers(card->qdio.in_q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
 	memset(&card->rx, 0, sizeof(struct qeth_rx));
+
 	qeth_initialize_working_pool_list(card);
 	/*give only as many buffers to hardware as we have buffer pool entries*/
-	for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; ++i)
-		qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]);
+	for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; i++) {
+		rc = qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]);
+		if (rc)
+			return rc;
+	}
+
 	card->qdio.in_q->next_buf_to_init =
 		card->qdio.in_buf_pool.buf_count - 1;
 	rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, 0,
-- 
2.20.1

[PATCH AUTOSEL 4.19 31/37] scsi: ipr: Fix softlockup when rescanning devices in petitboot

[Sasha Levin]

From: Wen Xiong <wenxiong@linux.vnet.ibm.com>

[ Upstream commit 394b61711f3ce33f75bf70a3e22938464a13b3ee ]

When trying to rescan disks in petitboot shell, we hit the following
softlockup stacktrace:

Kernel panic - not syncing: System is deadlocked on memory
[  241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1
[  241.223406] Call Trace:
[  241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable)
[  241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc
[  241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4
[  241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8
[  241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4
[  241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8
[  241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98
[  241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c
[  241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404
[  241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48
[  241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4
[  241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270
[  241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78
[  241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70
[  241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264
[  241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c
[  241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478
[  241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c
[  241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158
[  241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114
[  241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c
[  241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78
[  241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8
[  241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60
[  241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc
[  241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc
[  241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68

As a part of the scan process Linux will allocate and configure a
scsi_device for each target to be scanned. If the device is not present,
then the scsi_device is torn down. As a part of scsi_device teardown a
workqueue item will be scheduled and the lockups we see are because there
are 250k workqueue items to be processed.  Accoding to the specification of
SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters
to 4.

The patch fixes softlockup issue.

Thanks for Oliver Halloran's help with debugging and explanation!

Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.com
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ipr.c | 3 ++-
 drivers/scsi/ipr.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 271990bc065b9..1b04a8223eb01 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9958,6 +9958,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 	ioa_cfg->max_devs_supported = ipr_max_devs;
 
 	if (ioa_cfg->sis64) {
+		host->max_channel = IPR_MAX_SIS64_BUSES;
 		host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS;
 		host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET;
 		if (ipr_max_devs > IPR_MAX_SIS64_DEVS)
@@ -9966,6 +9967,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 					   + ((sizeof(struct ipr_config_table_entry64)
 					       * ioa_cfg->max_devs_supported)));
 	} else {
+		host->max_channel = IPR_VSET_BUS;
 		host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
 		host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
 		if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS)
@@ -9975,7 +9977,6 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 					       * ioa_cfg->max_devs_supported)));
 	}
 
-	host->max_channel = IPR_VSET_BUS;
 	host->unique_id = host->host_no;
 	host->max_cmd_len = IPR_MAX_CDB_LEN;
 	host->can_queue = ioa_cfg->max_cmds;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index f6baa23513139..9fbcdc283cdbb 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1313,6 +1313,7 @@ struct ipr_resource_entry {
 #define IPR_ARRAY_VIRTUAL_BUS			0x1
 #define IPR_VSET_VIRTUAL_BUS			0x2
 #define IPR_IOAFP_VIRTUAL_BUS			0x3
+#define IPR_MAX_SIS64_BUSES			0x4
 
 #define IPR_GET_RES_PHYS_LOC(res) \
 	(((res)->bus << 24) | ((res)->target << 8) | (res)->lun)
-- 
2.20.1

[PATCH AUTOSEL 4.19 32/37] mac80211: Do not send mesh HWMP PREQ if HWMP is disabled

[Sasha Levin]

From: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>

[ Upstream commit ba32679cac50c38fdf488296f96b1f3175532b8e ]

When trying to transmit to an unknown destination, the mesh code would
unconditionally transmit a HWMP PREQ even if HWMP is not the current
path selection algorithm.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh_hwmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 740dc9fa127cd..433d136282ded 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1137,7 +1137,8 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
-	if (!(mpath->flags & MESH_PATH_RESOLVING))
+	if (!(mpath->flags & MESH_PATH_RESOLVING) &&
+	    mesh_path_sel_is_hwmp(sdata))
 		mesh_queue_preq(mpath, PREQ_Q_F_START);
 
 	if (skb_queue_len(&mpath->frame_queue) >= MESH_FRAME_QUEUE_LEN)
-- 
2.20.1

[PATCH AUTOSEL 4.19 33/37] dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 7395f62d95aafacdb9bd4996ec2f95b4a655d7e6 ]

Clang warns:

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning:
converting the result of '?:' with integer constants to a boolean always
evaluates to 'true' [-Wtautological-constant-compare]
        return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom,
               ^
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded
from macro 'DPAA_FD_DATA_ALIGNMENT'
\#define DPAA_FD_DATA_ALIGNMENT  (fman_has_errata_a050385() ? 64 : 16)
                                 ^
1 warning generated.

This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385
workaround") even though it appears to have been an issue since the
introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA
Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero.

Just replace the whole boolean expression with the true branch, as it is
always been true.

Link: https://github.com/ClangBuiltLinux/linux/issues/928
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d7736c9c6339a..4b21ae27a9fde 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2764,9 +2764,7 @@ static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl)
 	headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE +
 		DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE);
 
-	return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom,
-					      DPAA_FD_DATA_ALIGNMENT) :
-					headroom;
+	return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
 }
 
 static int dpaa_eth_probe(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 34/37] sxgbe: Fix off by one in samsung driver strncpy size arg

[Sasha Levin]

From: Dominik Czarnota <dominik.b.czarnota@gmail.com>

[ Upstream commit f3cc008bf6d59b8d93b4190e01d3e557b0040e15 ]

This patch fixes an off-by-one error in strncpy size argument in
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in:

        strncmp(opt, "eee_timer:", 6)

the passed string literal: "eee_timer:" has 10 bytes (without the NULL
byte) and the passed size argument is 6. As a result, the logic will
also accept other, malformed strings, e.g. "eee_tiXXX:".

This bug doesn't seem to have any security impact since its present in
module's cmdline parsing code.

Signed-off-by: Dominik Czarnota <dominik.b.czarnota@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index a9da1ad4b4f20..30cd087aa67c1 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2282,7 +2282,7 @@ static int __init sxgbe_cmdline_opt(char *str)
 	if (!str || !*str)
 		return -EINVAL;
 	while ((opt = strsep(&str, ",")) != NULL) {
-		if (!strncmp(opt, "eee_timer:", 6)) {
+		if (!strncmp(opt, "eee_timer:", 10)) {
 			if (kstrtoint(opt + 10, 0, &eee_timer))
 				goto err;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.19 35/37] net: systemport: fix index check to avoid an array out of bounds access

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit c0368595c1639947839c0db8294ee96aca0b3b86 ]

Currently the bounds check on index is off by one and can lead to
an out of bounds access on array priv->filters_loc when index is
RXCHK_BRCM_TAG_MAX.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 6f8649376ff06..3fdf135bad56e 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2168,7 +2168,7 @@ static int bcm_sysport_rule_set(struct bcm_sysport_priv *priv,
 		return -ENOSPC;
 
 	index = find_first_zero_bit(priv->filters, RXCHK_BRCM_TAG_MAX);
-	if (index > RXCHK_BRCM_TAG_MAX)
+	if (index >= RXCHK_BRCM_TAG_MAX)
 		return -ENOSPC;
 
 	/* Location is the classification ID, and index is the position
-- 
2.20.1

[PATCH AUTOSEL 4.19 36/37] iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 81ee85d0462410de8eeeec1b9761941fd6ed8c7b ]

Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Fixes: 556ab45f9a77 ("ioat2: catch and recover from broken vtd configurations v6")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-iommu.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 9df3b84412274..5e6c961c800d8 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3998,10 +3998,11 @@ static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
 
 	/* we know that the this iommu should be at offset 0xa000 from vtbar */
 	drhd = dmar_find_matched_drhd_unit(pdev);
-	if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000,
-			    TAINT_FIRMWARE_WORKAROUND,
-			    "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n"))
+	if (!drhd || drhd->reg_base_addr - vtbar != 0xa000) {
+		pr_warn_once(FW_BUG "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n");
+		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
 		pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+	}
 }
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 37/37] iommu/vt-d: Fix the wrong printing in RHSA parsing

[Sasha Levin]

From: Zhenzhong Duan <zhenzhong.duan@gmail.com>

[ Upstream commit b0bb0c22c4db623f2e7b1a471596fbf1c22c6dc5 ]

When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.

This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c8894893cb ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/dmar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 72994d67bc5b9..5a0238806cae0 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -486,7 +486,7 @@ static int dmar_parse_one_rhsa(struct acpi_dmar_header *header, void *arg)
 		1, TAINT_FIRMWARE_WORKAROUND,
 		"Your BIOS is broken; RHSA refers to non-existent DMAR unit at %llx\n"
 		"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
-		drhd->reg_base_addr,
+		rhsa->base_address,
 		dmi_get_system_info(DMI_BIOS_VENDOR),
 		dmi_get_system_info(DMI_BIOS_VERSION),
 		dmi_get_system_info(DMI_PRODUCT_VERSION));
-- 
2.20.1