* [PATCH] drivers: iio: Drop unnecessary explicit casting
@ 2020-03-18 10:07 Nishant Malpani
2020-03-21 11:05 ` Jonathan Cameron
2020-03-21 12:26 ` Joe Perches
0 siblings, 2 replies; 6+ messages in thread
From: Nishant Malpani @ 2020-03-18 10:07 UTC (permalink / raw)
To: jic23; +Cc: knaack.h, lars, pmeerw, nish.malpani25, linux-iio, linux-kernel
Provide correct specifiers while printing error logs to discard the use
of unnecessary explicit casting.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
---
Based on previous conversations which can be found here [1].
[1] https://marc.info/?l=linux-iio&m=158427554607223&w=2
---
drivers/iio/accel/kxsd9-i2c.c | 4 ++--
drivers/iio/gyro/bmg160_i2c.c | 4 ++--
drivers/iio/gyro/bmg160_spi.c | 4 ++--
drivers/iio/gyro/mpu3050-i2c.c | 4 ++--
drivers/iio/imu/bmi160/bmi160_i2c.c | 4 ++--
drivers/iio/imu/bmi160/bmi160_spi.c | 4 ++--
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 4 ++--
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 4 ++--
drivers/iio/magnetometer/bmc150_magn_spi.c | 4 ++--
9 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
index 38411e1c155b..6a2fb2e84170 100644
--- a/drivers/iio/accel/kxsd9-i2c.c
+++ b/drivers/iio/accel/kxsd9-i2c.c
@@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
regmap = devm_regmap_init_i2c(i2c, &config);
if (IS_ERR(regmap)) {
- dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
index 4fc9c6a3321f..abb11855e1b2 100644
--- a/drivers/iio/gyro/bmg160_i2c.c
+++ b/drivers/iio/gyro/bmg160_i2c.c
@@ -21,8 +21,8 @@ static int bmg160_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
index 182a59c42507..104f1bac7805 100644
--- a/drivers/iio/gyro/bmg160_spi.c
+++ b/drivers/iio/gyro/bmg160_spi.c
@@ -19,8 +19,8 @@ static int bmg160_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
index afa8018b9238..9de9ca295742 100644
--- a/drivers/iio/gyro/mpu3050-i2c.c
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -51,8 +51,8 @@ static int mpu3050_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
index e36f5e82d400..6179d60d3968 100644
--- a/drivers/iio/imu/bmi160/bmi160_i2c.c
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -24,8 +24,8 @@ static int bmi160_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
index c19e3df35559..38fc4d124cc0 100644
--- a/drivers/iio/imu/bmi160/bmi160_spi.c
+++ b/drivers/iio/imu/bmi160/bmi160_spi.c
@@ -20,8 +20,8 @@ static int bmi160_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return bmi160_core_probe(&spi->dev, regmap, id->name, true);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 6993d3b87bb0..90f1f4c79605 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -122,8 +122,8 @@ static int inv_mpu_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 673b198e6368..7ee275547531 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -53,8 +53,8 @@ static int inv_mpu_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
index ed9be0490d77..f4afad0c44cc 100644
--- a/drivers/iio/magnetometer/bmc150_magn_spi.c
+++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
@@ -22,8 +22,8 @@ static int bmc150_magn_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] drivers: iio: Drop unnecessary explicit casting
2020-03-18 10:07 [PATCH] drivers: iio: Drop unnecessary explicit casting Nishant Malpani
@ 2020-03-21 11:05 ` Jonathan Cameron
2020-03-21 12:26 ` Joe Perches
1 sibling, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2020-03-21 11:05 UTC (permalink / raw)
To: Nishant Malpani; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On Wed, 18 Mar 2020 15:37:54 +0530
Nishant Malpani <nish.malpani25@gmail.com> wrote:
> Provide correct specifiers while printing error logs to discard the use
> of unnecessary explicit casting.
>
> Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Looks good in general, but I'd prefer one patch per driver
(all in a series for easy applying).
The reason is that these may need to be applied by someone as a
precursor to an actual fix. If we have them as one big set
they have to do considerably more work to use them than if
we keep the patches independent for each of the drivers.
Except in very rare cases we try to avoid patches that cover
multiple otherwise independent bits of code.
Thanks,
Jonathan
> ---
>
> Based on previous conversations which can be found here [1].
>
> [1] https://marc.info/?l=linux-iio&m=158427554607223&w=2
> ---
> drivers/iio/accel/kxsd9-i2c.c | 4 ++--
> drivers/iio/gyro/bmg160_i2c.c | 4 ++--
> drivers/iio/gyro/bmg160_spi.c | 4 ++--
> drivers/iio/gyro/mpu3050-i2c.c | 4 ++--
> drivers/iio/imu/bmi160/bmi160_i2c.c | 4 ++--
> drivers/iio/imu/bmi160/bmi160_spi.c | 4 ++--
> drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 4 ++--
> drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 4 ++--
> drivers/iio/magnetometer/bmc150_magn_spi.c | 4 ++--
> 9 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
> index 38411e1c155b..6a2fb2e84170 100644
> --- a/drivers/iio/accel/kxsd9-i2c.c
> +++ b/drivers/iio/accel/kxsd9-i2c.c
> @@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
>
> regmap = devm_regmap_init_i2c(i2c, &config);
> if (IS_ERR(regmap)) {
> - dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
> index 4fc9c6a3321f..abb11855e1b2 100644
> --- a/drivers/iio/gyro/bmg160_i2c.c
> +++ b/drivers/iio/gyro/bmg160_i2c.c
> @@ -21,8 +21,8 @@ static int bmg160_i2c_probe(struct i2c_client *client,
>
> regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
> if (IS_ERR(regmap)) {
> - dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
> index 182a59c42507..104f1bac7805 100644
> --- a/drivers/iio/gyro/bmg160_spi.c
> +++ b/drivers/iio/gyro/bmg160_spi.c
> @@ -19,8 +19,8 @@ static int bmg160_spi_probe(struct spi_device *spi)
>
> regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
> if (IS_ERR(regmap)) {
> - dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
> index afa8018b9238..9de9ca295742 100644
> --- a/drivers/iio/gyro/mpu3050-i2c.c
> +++ b/drivers/iio/gyro/mpu3050-i2c.c
> @@ -51,8 +51,8 @@ static int mpu3050_i2c_probe(struct i2c_client *client,
>
> regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
> index e36f5e82d400..6179d60d3968 100644
> --- a/drivers/iio/imu/bmi160/bmi160_i2c.c
> +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
> @@ -24,8 +24,8 @@ static int bmi160_i2c_probe(struct i2c_client *client,
>
> regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
> index c19e3df35559..38fc4d124cc0 100644
> --- a/drivers/iio/imu/bmi160/bmi160_spi.c
> +++ b/drivers/iio/imu/bmi160/bmi160_spi.c
> @@ -20,8 +20,8 @@ static int bmi160_spi_probe(struct spi_device *spi)
>
> regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
> return bmi160_core_probe(&spi->dev, regmap, id->name, true);
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> index 6993d3b87bb0..90f1f4c79605 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> @@ -122,8 +122,8 @@ static int inv_mpu_probe(struct i2c_client *client,
>
> regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&client->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> index 673b198e6368..7ee275547531 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> @@ -53,8 +53,8 @@ static int inv_mpu_probe(struct spi_device *spi)
>
> regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
>
> diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
> index ed9be0490d77..f4afad0c44cc 100644
> --- a/drivers/iio/magnetometer/bmc150_magn_spi.c
> +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
> @@ -22,8 +22,8 @@ static int bmc150_magn_spi_probe(struct spi_device *spi)
>
> regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config);
> if (IS_ERR(regmap)) {
> - dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
> + PTR_ERR(regmap));
> return PTR_ERR(regmap);
> }
> return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name);
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drivers: iio: Drop unnecessary explicit casting
2020-03-18 10:07 [PATCH] drivers: iio: Drop unnecessary explicit casting Nishant Malpani
2020-03-21 11:05 ` Jonathan Cameron
@ 2020-03-21 12:26 ` Joe Perches
2020-03-21 18:26 ` Nishant Malpani
2020-03-21 18:47 ` Jonathan Cameron
1 sibling, 2 replies; 6+ messages in thread
From: Joe Perches @ 2020-03-21 12:26 UTC (permalink / raw)
To: Nishant Malpani, jic23; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On Wed, 2020-03-18 at 15:37 +0530, Nishant Malpani wrote:
> Provide correct specifiers while printing error logs to discard the use
> of unnecessary explicit casting.
[]
> diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
[]
> @@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
>
> regmap = devm_regmap_init_i2c(i2c, &config);
> if (IS_ERR(regmap)) {
> - dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
> - (int)PTR_ERR(regmap));
> + dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
> + PTR_ERR(regmap));
Another option would be to use %pe to print the error identifier
and not the error number
etc...
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drivers: iio: Drop unnecessary explicit casting
2020-03-21 12:26 ` Joe Perches
@ 2020-03-21 18:26 ` Nishant Malpani
2020-03-21 18:33 ` Joe Perches
2020-03-21 18:47 ` Jonathan Cameron
1 sibling, 1 reply; 6+ messages in thread
From: Nishant Malpani @ 2020-03-21 18:26 UTC (permalink / raw)
To: Joe Perches, jic23; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On 21/03/20 5:56 pm, Joe Perches wrote:
> On Wed, 2020-03-18 at 15:37 +0530, Nishant Malpani wrote:
>> Provide correct specifiers while printing error logs to discard the use
>> of unnecessary explicit casting.
> []
>> diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
> []
>> @@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
>>
>> regmap = devm_regmap_init_i2c(i2c, &config);
>> if (IS_ERR(regmap)) {
>> - dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
>> - (int)PTR_ERR(regmap));
>> + dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
>> + PTR_ERR(regmap));
>
> Another option would be to use %pe to print the error identifier
> and not the error number
>
By 'error identifier' you mean the symbolic error name (as described in
docs [1]), right? Yes, to me, it makes sense too, as it would be more
"readable" during debugging. Jonathan, if you agree, do I send a
patchset replacing with %pe specifier for all the drivers in consideration?
With regards,
Nishant Malpani
[1]
https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#error-pointers
> etc...
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] drivers: iio: Drop unnecessary explicit casting
2020-03-21 18:26 ` Nishant Malpani
@ 2020-03-21 18:33 ` Joe Perches
0 siblings, 0 replies; 6+ messages in thread
From: Joe Perches @ 2020-03-21 18:33 UTC (permalink / raw)
To: Nishant Malpani, jic23; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On Sat, 2020-03-21 at 23:56 +0530, Nishant Malpani wrote:
> On 21/03/20 5:56 pm, Joe Perches wrote:
> > On Wed, 2020-03-18 at 15:37 +0530, Nishant Malpani wrote:
> > > Provide correct specifiers while printing error logs to discard the use
> > > of unnecessary explicit casting.
> > []
> > > diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
> > []
> > > @@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
> > >
> > > regmap = devm_regmap_init_i2c(i2c, &config);
> > > if (IS_ERR(regmap)) {
> > > - dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
> > > - (int)PTR_ERR(regmap));
> > > + dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
> > > + PTR_ERR(regmap));
> >
> > Another option would be to use %pe to print the error identifier
> > and not the error number
> >
> By 'error identifier' you mean the symbolic error name (as described in
> docs [1]), right?
Yes
> https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#error-pointers
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] drivers: iio: Drop unnecessary explicit casting
2020-03-21 12:26 ` Joe Perches
2020-03-21 18:26 ` Nishant Malpani
@ 2020-03-21 18:47 ` Jonathan Cameron
1 sibling, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2020-03-21 18:47 UTC (permalink / raw)
To: Joe Perches
Cc: Nishant Malpani, knaack.h, lars, pmeerw, linux-iio, linux-kernel
On Sat, 21 Mar 2020 05:26:52 -0700
Joe Perches <joe@perches.com> wrote:
> On Wed, 2020-03-18 at 15:37 +0530, Nishant Malpani wrote:
> > Provide correct specifiers while printing error logs to discard the use
> > of unnecessary explicit casting.
> []
> > diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
> []
> > @@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
> >
> > regmap = devm_regmap_init_i2c(i2c, &config);
> > if (IS_ERR(regmap)) {
> > - dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
> > - (int)PTR_ERR(regmap));
> > + dev_err(&i2c->dev, "Failed to register i2c regmap %ld\n",
> > + PTR_ERR(regmap));
>
> Another option would be to use %pe to print the error identifier
> and not the error number
>
> etc...
>
>
Indeed that would be even better. I'd missed that one being added
to the magic of prink :)
Jonathan
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-21 18:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-18 10:07 [PATCH] drivers: iio: Drop unnecessary explicit casting Nishant Malpani
2020-03-21 11:05 ` Jonathan Cameron
2020-03-21 12:26 ` Joe Perches
2020-03-21 18:26 ` Nishant Malpani
2020-03-21 18:33 ` Joe Perches
2020-03-21 18:47 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).