From: Luca Weiss <luca@z3ntu.xyz> To: linux-leds@vger.kernel.org Cc: Dan Murphy <dmurphy@ti.com>, Heiko Stuebner <heiko@sntech.de>, Icenowy Zheng <icenowy@aosc.io>, Jacek Anaszewski <jacek.anaszewski@gmail.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <mripard@kernel.org>, Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Luca Weiss <luca@z3ntu.xyz> Subject: [PATCH v2 2/2] leds: add sgm3140 driver Date: Mon, 30 Mar 2020 21:47:57 +0200 Message-ID: <20200330194757.2645388-3-luca@z3ntu.xyz> (raw) In-Reply-To: <20200330194757.2645388-1-luca@z3ntu.xyz> Add a driver for the SGMICRO SGM3140 Buck/Boost Charge Pump LED driver. This device is controlled by two GPIO pins, one for enabling and the second one for switching between torch and flash mode. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- Changes since v1: - Add vin-supply (keep track of 'enabled' state for that) - Wrap lines - static const -ify some structs and methods - use strscpy instead of strlcpy - remove u32 cast by adding 'U' suffix to constants - rebase on linux-next drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-sgm3140.c | 317 ++++++++++++++++++++++++++++++++++++ 3 files changed, 327 insertions(+) create mode 100644 drivers/leds/leds-sgm3140.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 7599dbee8de1..f5beeff16bdd 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -871,6 +871,15 @@ config LEDS_IP30 To compile this driver as a module, choose M here: the module will be called leds-ip30. +config LEDS_SGM3140 + tristate "LED support for the SGM3140" + depends on LEDS_CLASS_FLASH + depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS + depends on OF + help + This option enables support for the SGM3140 500mA Buck/Boost Charge + Pump LED Driver. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index fd61421f7d40..f60ed0c09d4c 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o +obj-$(CONFIG_LEDS_SGM3140) += leds-sgm3140.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o diff --git a/drivers/leds/leds-sgm3140.c b/drivers/leds/leds-sgm3140.c new file mode 100644 index 000000000000..28fe5e34f931 --- /dev/null +++ b/drivers/leds/leds-sgm3140.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2020 Luca Weiss <luca@z3ntu.xyz> + +#include <linux/gpio/consumer.h> +#include <linux/led-class-flash.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/platform_device.h> + +#include <media/v4l2-flash-led-class.h> + +#define FLASH_TIMEOUT_DEFAULT 250000U /* 250ms */ +#define FLASH_MAX_TIMEOUT_DEFAULT 300000U /* 300ms */ + +struct sgm3140 { + bool enabled; + struct gpio_desc *flash_gpio; + struct gpio_desc *enable_gpio; + struct regulator *vin_regulator; + + /* current timeout in us */ + u32 timeout; + /* maximum timeout in us */ + u32 max_timeout; + + struct led_classdev_flash fled_cdev; + struct v4l2_flash *v4l2_flash; + + struct timer_list powerdown_timer; +}; + +static struct sgm3140 *flcdev_to_sgm3140(struct led_classdev_flash *flcdev) +{ + return container_of(flcdev, struct sgm3140, fled_cdev); +} + +static int sgm3140_strobe_set(struct led_classdev_flash *fled_cdev, bool state) +{ + struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev); + int ret; + + if (priv->enabled == state) + return 0; + + if (state) { + ret = regulator_enable(priv->vin_regulator); + if (ret) { + dev_err(fled_cdev->led_cdev.dev, + "failed to enable regulator: %d\n", ret); + return ret; + } + gpiod_set_value_cansleep(priv->flash_gpio, 1); + gpiod_set_value_cansleep(priv->enable_gpio, 1); + mod_timer(&priv->powerdown_timer, + jiffies + usecs_to_jiffies(priv->timeout)); + } else { + del_timer_sync(&priv->powerdown_timer); + gpiod_set_value_cansleep(priv->enable_gpio, 0); + gpiod_set_value_cansleep(priv->flash_gpio, 0); + ret = regulator_disable(priv->vin_regulator); + if (ret) { + dev_err(fled_cdev->led_cdev.dev, + "failed to disable regulator: %d\n", ret); + return ret; + } + } + + priv->enabled = state; + + return 0; +} + +static int sgm3140_strobe_get(struct led_classdev_flash *fled_cdev, bool *state) +{ + struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev); + + *state = timer_pending(&priv->powerdown_timer); + + return 0; +} + +static int sgm3140_timeout_set(struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev); + + priv->timeout = timeout; + + return 0; +} + +static const struct led_flash_ops sgm3140_flash_ops = { + .strobe_set = sgm3140_strobe_set, + .strobe_get = sgm3140_strobe_get, + .timeout_set = sgm3140_timeout_set, +}; + +static int sgm3140_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev); + bool enable = brightness == LED_ON; + int ret; + + if (priv->enabled == enable) + return 0; + + if (enable) { + ret = regulator_enable(priv->vin_regulator); + if (ret) { + dev_err(led_cdev->dev, + "failed to enable regulator: %d\n", ret); + return ret; + } + gpiod_set_value_cansleep(priv->enable_gpio, 1); + } else { + gpiod_set_value_cansleep(priv->enable_gpio, 0); + ret = regulator_disable(priv->vin_regulator); + if (ret) { + dev_err(led_cdev->dev, + "failed to disable regulator: %d\n", ret); + return ret; + } + } + + priv->enabled = enable; + + return 0; +} + +static void sgm3140_powerdown_timer(struct timer_list *t) +{ + struct sgm3140 *priv = from_timer(priv, t, powerdown_timer); + + gpiod_set_value(priv->enable_gpio, 0); + gpiod_set_value(priv->flash_gpio, 0); + regulator_disable(priv->vin_regulator); + + priv->enabled = false; +} + +static void sgm3140_init_flash_timeout(struct sgm3140 *priv) +{ + struct led_classdev_flash *fled_cdev = &priv->fled_cdev; + struct led_flash_setting *s; + + /* Init flash timeout setting */ + s = &fled_cdev->timeout; + s->min = 1; + s->max = priv->max_timeout; + s->step = 1; + s->val = FLASH_TIMEOUT_DEFAULT; +} + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) +static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv, + struct v4l2_flash_config *v4l2_sd_cfg) +{ + struct led_classdev *led_cdev = &priv->fled_cdev.led_cdev; + struct led_flash_setting *s; + + strscpy(v4l2_sd_cfg->dev_name, led_cdev->dev->kobj.name, + sizeof(v4l2_sd_cfg->dev_name)); + + /* Init flash intensity setting */ + s = &v4l2_sd_cfg->intensity; + s->min = 0; + s->max = 1; + s->step = 1; + s->val = 1; +} + +#else +static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv, + struct v4l2_flash_config *v4l2_sd_cfg) +{ +} +#endif + +static int sgm3140_probe(struct platform_device *pdev) +{ + struct sgm3140 *priv; + struct led_classdev *led_cdev; + struct led_classdev_flash *fled_cdev; + struct led_init_data init_data = {}; + struct device_node *child_node; + struct v4l2_flash_config v4l2_sd_cfg = {}; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->flash_gpio = devm_gpiod_get(&pdev->dev, "flash", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(priv->flash_gpio); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to request flash gpio: %d\n", ret); + return ret; + } + + priv->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(priv->enable_gpio); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to request enable gpio: %d\n", ret); + return ret; + } + + priv->vin_regulator = devm_regulator_get(&pdev->dev, "vin"); + ret = PTR_ERR_OR_ZERO(priv->vin_regulator); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to request regulator: %d\n", ret); + return ret; + } + + child_node = of_get_next_available_child(pdev->dev.of_node, NULL); + if (!child_node) { + dev_err(&pdev->dev, + "No DT child node found for connected LED.\n"); + return -EINVAL; + } + + ret = of_property_read_u32(child_node, "flash-max-timeout-us", + &priv->max_timeout); + if (ret) { + priv->max_timeout = FLASH_MAX_TIMEOUT_DEFAULT; + dev_warn(&pdev->dev, + "flash-max-timeout-us DT property missing\n"); + } + + /* + * Set default timeout to FLASH_DEFAULT_TIMEOUT except if max_timeout + * from DT is lower. + */ + priv->timeout = min(priv->max_timeout, FLASH_TIMEOUT_DEFAULT); + + timer_setup(&priv->powerdown_timer, sgm3140_powerdown_timer, 0); + + fled_cdev = &priv->fled_cdev; + led_cdev = &fled_cdev->led_cdev; + + fled_cdev->ops = &sgm3140_flash_ops; + + led_cdev->brightness_set_blocking = sgm3140_brightness_set; + led_cdev->max_brightness = LED_ON; + led_cdev->flags |= LED_DEV_CAP_FLASH; + + sgm3140_init_flash_timeout(priv); + + init_data.fwnode = of_fwnode_handle(child_node); + + platform_set_drvdata(pdev, priv); + + /* Register in the LED subsystem */ + ret = devm_led_classdev_flash_register_ext(&pdev->dev, + fled_cdev, &init_data); + if (ret) { + dev_err(&pdev->dev, "Failed to register flash device: %d\n", + ret); + goto err; + } + + sgm3140_init_v4l2_flash_config(priv, &v4l2_sd_cfg); + + /* Create V4L2 Flash subdev */ + priv->v4l2_flash = v4l2_flash_init(&pdev->dev, + of_fwnode_handle(child_node), + fled_cdev, NULL, + &v4l2_sd_cfg); + if (IS_ERR(priv->v4l2_flash)) { + ret = PTR_ERR(priv->v4l2_flash); + goto err; + } + +err: + of_node_put(child_node); + return ret; +} + +static int sgm3140_remove(struct platform_device *pdev) +{ + struct sgm3140 *priv = platform_get_drvdata(pdev); + + del_timer_sync(&priv->powerdown_timer); + + v4l2_flash_release(priv->v4l2_flash); + + return 0; +} + +static const struct of_device_id sgm3140_dt_match[] = { + { .compatible = "sgmicro,sgm3140" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sgm3140_dt_match); + +static struct platform_driver sgm3140_driver = { + .probe = sgm3140_probe, + .remove = sgm3140_remove, + .driver = { + .name = "sgm3140", + .of_match_table = sgm3140_dt_match, + }, +}; + +module_platform_driver(sgm3140_driver); + +MODULE_AUTHOR("Luca Weiss <luca@z3ntu.xyz>"); +MODULE_DESCRIPTION("SG Micro SGM3140 charge pump led driver"); +MODULE_LICENSE("GPL v2"); -- 2.26.0
next prev parent reply index Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-30 19:47 [PATCH v2 0/2] Add sgm3140 flash led driver Luca Weiss 2020-03-30 19:47 ` [PATCH v2 1/2] dt-bindings: leds: Add binding for sgm3140 Luca Weiss 2020-04-03 17:21 ` Dan Murphy 2020-04-10 17:41 ` Rob Herring 2020-03-30 19:47 ` Luca Weiss [this message] 2020-04-03 17:31 ` [PATCH v2 2/2] leds: add sgm3140 driver Dan Murphy 2020-04-04 9:36 ` Luca Weiss 2020-04-04 13:56 ` Dan Murphy 2020-04-04 9:58 ` Andy Shevchenko 2020-04-05 18:45 ` Luca Weiss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200330194757.2645388-3-luca@z3ntu.xyz \ --to=luca@z3ntu.xyz \ --cc=devicetree@vger.kernel.org \ --cc=dmurphy@ti.com \ --cc=heiko@sntech.de \ --cc=icenowy@aosc.io \ --cc=jacek.anaszewski@gmail.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mripard@kernel.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=~postmarketos/upstreaming@lists.sr.ht \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git