[v1 2/3] arm64: dts: sc7180: add bus clock to mdp node for sc7180 target

[v1 2/3] arm64: dts: sc7180: add bus clock to mdp node for sc7180 target

[Krishna Manikandan]

Move the bus clock to mdp device node,in order
to facilitate bus band width scaling on sc7180
target.

The parent device MDSS will not vote for bus bw,
instead the vote will be triggered by mdp device
node. Since a minimum vote is required to turn
on bus clock, move the clock node to mdp device
from where the votes are requested.

This patch has dependency on the below series
https://patchwork.kernel.org/patch/11468783/

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101..ea1b0cd 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1510,10 +1510,9 @@
 			power-domains = <&dispcc MDSS_GDSC>;
 
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
-				 <&gcc GCC_DISP_HF_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			clock-names = "iface", "bus", "ahb", "core";
+			clock-names = "iface", "ahb", "core";
 
 			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			assigned-clock-rates = <300000000>;
@@ -1536,12 +1535,13 @@
 				      <0 0x0aeb0000 0 0x2008>;
 				reg-names = "mdp", "vbif";
 
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				clock-names = "iface", "rot", "lut", "core",
+				clock-names = "bus", "iface", "rot", "lut", "core",
 					      "vsync";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-- 
1.9.1

[v1 3/3] arm64: dts: sc7180: define interconnects for sc7180 target

[Krishna Manikandan]

Define interconnects for display driver for
sc7180 target.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ea1b0cd..31fed6d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1521,6 +1521,9 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+			interconnect-names = "mdp0-mem";
+
 			iommus = <&apps_smmu 0x800 0x2>;
 
 			#address-cells = <2>;
-- 
1.9.1

Re: [v1 3/3] arm64: dts: sc7180: define interconnects for sc7180 target

[Matthias Kaehlcke]

On Wed, Apr 01, 2020 at 02:47:45PM +0530, Krishna Manikandan wrote:

> Subject: arm64: dts: sc7180: define interconnects for sc7180 target

Please be more specific about which interconnect entries are added.
Also no need to repeat 'sc7180', it is already clear from the prefix.