* [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description
@ 2020-04-01 22:15 Ludovic Desroches
2020-04-01 22:15 ` [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin Ludovic Desroches
` (5 more replies)
0 siblings, 6 replies; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:15 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches, stable
Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
node which come probably from an unchecked copy/paste.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
---
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 1c24ac8019ba7..772809c54c1f3 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -125,8 +125,6 @@ sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
- non-removable;
- mmc-ddr-1_8v;
status = "okay";
};
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
@ 2020-04-01 22:15 ` Ludovic Desroches
2020-04-01 22:19 ` [RESEND PATCH " Ludovic Desroches
2020-04-01 22:15 ` [PATCH 3/5] ARM: dts: at91: sama5d2_ptc_ek: add PB_USER as wakeup source Ludovic Desroches
` (4 subsequent siblings)
5 siblings, 1 reply; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:15 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches, stable
The gpio property for the vbus pin doesn't watch the pinctrl and is
not correct.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
---
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 772809c54c1f3..b803fa1f20391 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -40,7 +40,7 @@ main_xtal {
ahb {
usb0: gadget@300000 {
- atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/5] ARM: dts: at91: sama5d2_ptc_ek: add PB_USER as wakeup source
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
2020-04-01 22:15 ` [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin Ludovic Desroches
@ 2020-04-01 22:15 ` Ludovic Desroches
2020-04-01 22:15 ` [PATCH 4/5] ARM: dts: at91: sama5d27_som1_ek: enable i2c0 Ludovic Desroches
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:15 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches
Add the push button PB_USER as wakeup source
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index b803fa1f20391..32435ce1dab22 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -412,6 +412,7 @@ bp1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/5] ARM: dts: at91: sama5d27_som1_ek: enable i2c0
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
2020-04-01 22:15 ` [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin Ludovic Desroches
2020-04-01 22:15 ` [PATCH 3/5] ARM: dts: at91: sama5d2_ptc_ek: add PB_USER as wakeup source Ludovic Desroches
@ 2020-04-01 22:15 ` Ludovic Desroches
2020-04-01 22:15 ` [PATCH 5/5] ARM: dts: at91: sama5d27_som1_ek: add an alias for i2c0 Ludovic Desroches
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:15 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches
Enable i2c0 controller.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index b0853bf7901ce..1a26e1a129319 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -115,6 +115,13 @@ uart2: serial@f8024000 {
status = "okay";
};
+ i2c0: i2c@f8028000 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ status = "okay";
+ };
+
pwm0: pwm@f802c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
@@ -281,6 +288,12 @@ pinctrl_flx3_default: flx3_default {
bias-disable;
};
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD4__TWD1>,
<PIN_PD5__TWCK1>;
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 5/5] ARM: dts: at91: sama5d27_som1_ek: add an alias for i2c0
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
` (2 preceding siblings ...)
2020-04-01 22:15 ` [PATCH 4/5] ARM: dts: at91: sama5d27_som1_ek: enable i2c0 Ludovic Desroches
@ 2020-04-01 22:15 ` Ludovic Desroches
2020-04-02 7:49 ` [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Alexandre Belloni
2020-04-02 9:20 ` Eugen.Hristev
5 siblings, 0 replies; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:15 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches
Add aliases for i2c devices to not rely on probe order for i2c device
numbering.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 1a26e1a129319..535627c6045b6 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -20,6 +20,7 @@ aliases {
serial0 = &uart1; /* DBGU */
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
+ i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
};
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESEND PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin
2020-04-01 22:15 ` [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin Ludovic Desroches
@ 2020-04-01 22:19 ` Ludovic Desroches
0 siblings, 0 replies; 10+ messages in thread
From: Ludovic Desroches @ 2020-04-01 22:19 UTC (permalink / raw)
To: nicolas.ferre, alexandre.belloni, robh+dt
Cc: linux-arm-kernel, devicetree, linux-kernel, Tudor.Ambarus,
Cristian.Birsan, Codrin.Ciubotariu, Ludovic Desroches, stable
The gpio property for the vbus pin doesn't match the pinctrl and is
not correct.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
---
s/watch/match
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 772809c54c1f3..b803fa1f20391 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -40,7 +40,7 @@ main_xtal {
ahb {
usb0: gadget@300000 {
- atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
--
2.26.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
` (3 preceding siblings ...)
2020-04-01 22:15 ` [PATCH 5/5] ARM: dts: at91: sama5d27_som1_ek: add an alias for i2c0 Ludovic Desroches
@ 2020-04-02 7:49 ` Alexandre Belloni
2020-04-02 9:20 ` Eugen.Hristev
5 siblings, 0 replies; 10+ messages in thread
From: Alexandre Belloni @ 2020-04-02 7:49 UTC (permalink / raw)
To: Ludovic Desroches
Cc: nicolas.ferre, robh+dt, linux-arm-kernel, devicetree,
linux-kernel, Tudor.Ambarus, Cristian.Birsan, Codrin.Ciubotariu,
stable
On 02/04/2020 00:15:00+0200, Ludovic Desroches wrote:
> Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
> node which come probably from an unchecked copy/paste.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
> Cc: stable@vger.kernel.org # 4.19 and later
> ---
> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 --
> 1 file changed, 2 deletions(-)
>
All applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
` (4 preceding siblings ...)
2020-04-02 7:49 ` [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Alexandre Belloni
@ 2020-04-02 9:20 ` Eugen.Hristev
2020-04-02 10:07 ` Ludovic.Desroches
5 siblings, 1 reply; 10+ messages in thread
From: Eugen.Hristev @ 2020-04-02 9:20 UTC (permalink / raw)
To: Ludovic.Desroches, Nicolas.Ferre, alexandre.belloni, robh+dt
Cc: devicetree, Tudor.Ambarus, linux-kernel, stable,
linux-arm-kernel, Codrin.Ciubotariu, Cristian.Birsan
On 02.04.2020 01:15, Ludovic Desroches wrote:
> Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
> node which come probably from an unchecked copy/paste.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
> Cc: stable@vger.kernel.org # 4.19 and later
> ---
> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> index 1c24ac8019ba7..772809c54c1f3 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> @@ -125,8 +125,6 @@ sdmmc0: sdio-host@a0000000 {
> bus-width = <8>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sdmmc0_default>;
> - non-removable;
> - mmc-ddr-1_8v;
Hi Ludovic,
I am not sure about the removal of mmc-ddr-1_8v; this means eMMCs
connected on this slot won't work in high speed mode, some people use
eMMC to SD-Card adapters and stick them into SD-Card slots.
Would it be a problem to keep this property here ?
Thanks,
Eugen
> status = "okay";
> };
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description
2020-04-02 9:20 ` Eugen.Hristev
@ 2020-04-02 10:07 ` Ludovic.Desroches
2020-04-02 10:27 ` Eugen.Hristev
0 siblings, 1 reply; 10+ messages in thread
From: Ludovic.Desroches @ 2020-04-02 10:07 UTC (permalink / raw)
To: Eugen.Hristev, Nicolas.Ferre, alexandre.belloni, robh+dt
Cc: devicetree, Tudor.Ambarus, linux-kernel, stable,
linux-arm-kernel, Codrin.Ciubotariu, Cristian.Birsan
On 4/2/2020 11:20 AM, Eugen Hristev - M18282 wrote:
> On 02.04.2020 01:15, Ludovic Desroches wrote:
>> Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
>> node which come probably from an unchecked copy/paste.
>>
>> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
>> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
>> Cc: stable@vger.kernel.org # 4.19 and later
>> ---
>> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 --
>> 1 file changed, 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>> index 1c24ac8019ba7..772809c54c1f3 100644
>> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>> @@ -125,8 +125,6 @@ sdmmc0: sdio-host@a0000000 {
>> bus-width = <8>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_sdmmc0_default>;
>> - non-removable;
>> - mmc-ddr-1_8v;
>
> Hi Ludovic,
>
> I am not sure about the removal of mmc-ddr-1_8v; this means eMMCs
> connected on this slot won't work in high speed mode, some people use
> eMMC to SD-Card adapters and stick them into SD-Card slots.
> Would it be a problem to keep this property here ?
Hi Eugen,
It's not a problem to keep it, but I don't think it makes sense. In this
case mmc-ddr-3_3v should be added too.
Will it work 'out of the box' with any eMMC to SD-Card adapters and
eMMCs? I remember discussions where we said HW changes were needed to be
able to select the voltage for the IOs other than using the VDDSEL
signal of the controller.
Regards
Ludovic
>
> Thanks,
> Eugen
>
>> status = "okay";
>> };
>>
>>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description
2020-04-02 10:07 ` Ludovic.Desroches
@ 2020-04-02 10:27 ` Eugen.Hristev
0 siblings, 0 replies; 10+ messages in thread
From: Eugen.Hristev @ 2020-04-02 10:27 UTC (permalink / raw)
To: Ludovic.Desroches, Nicolas.Ferre, alexandre.belloni, robh+dt
Cc: devicetree, Tudor.Ambarus, linux-kernel, stable,
linux-arm-kernel, Codrin.Ciubotariu, Cristian.Birsan
On 02.04.2020 13:07, Ludovic Desroches - M43218 wrote:
> On 4/2/2020 11:20 AM, Eugen Hristev - M18282 wrote:
>> On 02.04.2020 01:15, Ludovic Desroches wrote:
>>> Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
>>> node which come probably from an unchecked copy/paste.
>>>
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
>>> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
>>> Cc: stable@vger.kernel.org # 4.19 and later
>>> ---
>>> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 --
>>> 1 file changed, 2 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>>> index 1c24ac8019ba7..772809c54c1f3 100644
>>> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>>> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>>> @@ -125,8 +125,6 @@ sdmmc0: sdio-host@a0000000 {
>>> bus-width = <8>;
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&pinctrl_sdmmc0_default>;
>>> - non-removable;
>>> - mmc-ddr-1_8v;
>>
>> Hi Ludovic,
>>
>> I am not sure about the removal of mmc-ddr-1_8v; this means eMMCs
>> connected on this slot won't work in high speed mode, some people use
>> eMMC to SD-Card adapters and stick them into SD-Card slots.
>> Would it be a problem to keep this property here ?
>
> Hi Eugen,
>
> It's not a problem to keep it, but I don't think it makes sense. In this
> case mmc-ddr-3_3v should be added too.
>
> Will it work 'out of the box' with any eMMC to SD-Card adapters and
> eMMCs? I remember discussions where we said HW changes were needed to be
> able to select the voltage for the IOs other than using the VDDSEL
> signal of the controller.
Yes indeed , ddr-3_3v would be needed for those. I can follow up later
with a patch to add that if required.
Thanks !
>
> Regards
>
> Ludovic
>
>
>>
>> Thanks,
>> Eugen
>>
>>> status = "okay";
>>> };
>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-04-02 10:27 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-01 22:15 [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Ludovic Desroches
2020-04-01 22:15 ` [PATCH 2/5] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin Ludovic Desroches
2020-04-01 22:19 ` [RESEND PATCH " Ludovic Desroches
2020-04-01 22:15 ` [PATCH 3/5] ARM: dts: at91: sama5d2_ptc_ek: add PB_USER as wakeup source Ludovic Desroches
2020-04-01 22:15 ` [PATCH 4/5] ARM: dts: at91: sama5d27_som1_ek: enable i2c0 Ludovic Desroches
2020-04-01 22:15 ` [PATCH 5/5] ARM: dts: at91: sama5d27_som1_ek: add an alias for i2c0 Ludovic Desroches
2020-04-02 7:49 ` [PATCH 1/5] ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description Alexandre Belloni
2020-04-02 9:20 ` Eugen.Hristev
2020-04-02 10:07 ` Ludovic.Desroches
2020-04-02 10:27 ` Eugen.Hristev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).