[PATCH AUTOSEL 4.19 01/32] cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

[PATCH AUTOSEL 4.19 01/32] cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

[Sasha Levin]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 36eb7dc1bd42fe5f850329c893768ff89b696fba ]

imx6ul_opp_check_speed_grading is called for both i.MX6UL and i.MX6ULL.
Since the i.MX6ULL was introduced to a separate ocotp compatible node
later, it is possible that the i.MX6ULL has also dtbs with
"fsl,imx6ull-ocotp". On a system without nvmem-cell speed grade a
missing check on this node causes a driver fail without considering
the cpu speed grade.

This patch prevents unwanted cpu overclocking on i.MX6ULL with compatible
node "fsl,imx6ull-ocotp" in old dtbs without nvmem-cell speed grade.

Fixes: 2733fb0d0699 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/imx6q-cpufreq.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index d8c3595e90236..a0cbbdfc77359 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -310,6 +310,9 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		void __iomem *base;
 
 		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
+		if (!np)
+			np = of_find_compatible_node(NULL, NULL,
+						     "fsl,imx6ull-ocotp");
 		if (!np)
 			return -ENOENT;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/32] media: venus: hfi_parser: Ignore HEVC encoding for V1

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit c50cc6dc6c48300af63a6fbc71b647053c15fc80 ]

Some older MSM8916 Venus firmware versions also seem to indicate
support for encoding HEVC, even though they really can't.
This will lead to errors later because hfi_session_init() fails
in this case.

HEVC is already ignored for "dec_codecs", so add the same for
"enc_codecs" to make these old firmware versions work correctly.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/hfi_parser.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_parser.c b/drivers/media/platform/qcom/venus/hfi_parser.c
index 2293d936e49ca..7f515a4b9bd12 100644
--- a/drivers/media/platform/qcom/venus/hfi_parser.c
+++ b/drivers/media/platform/qcom/venus/hfi_parser.c
@@ -181,6 +181,7 @@ static void parse_codecs(struct venus_core *core, void *data)
 	if (IS_V1(core)) {
 		core->dec_codecs &= ~HFI_VIDEO_CODEC_HEVC;
 		core->dec_codecs &= ~HFI_VIDEO_CODEC_SPARK;
+		core->enc_codecs &= ~HFI_VIDEO_CODEC_HEVC;
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 03/32] firmware: arm_sdei: fix double-lock on hibernate with shared events

[Sasha Levin]

From: James Morse <james.morse@arm.com>

[ Upstream commit 6ded0b61cf638bf9f8efe60ab8ba23db60ea9763 ]

SDEI has private events that must be registered on each CPU. When
CPUs come and go they must re-register and re-enable their private
events. Each event has flags to indicate whether this should happen
to protect against an event being registered on a CPU coming online,
while all the others are unregistering the event.

These flags are protected by the sdei_list_lock spinlock, because
the cpuhp callbacks can't take the mutex.

Hibernate needs to unregister all events, but keep the in-memory
re-register and re-enable as they are. sdei_unregister_shared()
takes the spinlock to walk the list, then calls _sdei_event_unregister()
on each shared event. _sdei_event_unregister() tries to take the
same spinlock to update re-register and re-enable. This doesn't go
so well.

Push the re-register and re-enable updates out to their callers.
sdei_unregister_shared() doesn't want these values updated, so
doesn't need to do anything.

This also fixes shared events getting lost over hibernate as this
path made them look unregistered.

Fixes: da351827240e ("firmware: arm_sdei: Add support for CPU and system power states")
Reported-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_sdei.c | 32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c
index c64c7da738297..05b528c7ed8fd 100644
--- a/drivers/firmware/arm_sdei.c
+++ b/drivers/firmware/arm_sdei.c
@@ -489,11 +489,6 @@ static int _sdei_event_unregister(struct sdei_event *event)
 {
 	lockdep_assert_held(&sdei_events_lock);
 
-	spin_lock(&sdei_list_lock);
-	event->reregister = false;
-	event->reenable = false;
-	spin_unlock(&sdei_list_lock);
-
 	if (event->type == SDEI_EVENT_TYPE_SHARED)
 		return sdei_api_event_unregister(event->event_num);
 
@@ -516,6 +511,11 @@ int sdei_event_unregister(u32 event_num)
 			break;
 		}
 
+		spin_lock(&sdei_list_lock);
+		event->reregister = false;
+		event->reenable = false;
+		spin_unlock(&sdei_list_lock);
+
 		err = _sdei_event_unregister(event);
 		if (err)
 			break;
@@ -583,26 +583,15 @@ static int _sdei_event_register(struct sdei_event *event)
 
 	lockdep_assert_held(&sdei_events_lock);
 
-	spin_lock(&sdei_list_lock);
-	event->reregister = true;
-	spin_unlock(&sdei_list_lock);
-
 	if (event->type == SDEI_EVENT_TYPE_SHARED)
 		return sdei_api_event_register(event->event_num,
 					       sdei_entry_point,
 					       event->registered,
 					       SDEI_EVENT_REGISTER_RM_ANY, 0);
 
-
 	err = sdei_do_cross_call(_local_event_register, event);
-	if (err) {
-		spin_lock(&sdei_list_lock);
-		event->reregister = false;
-		event->reenable = false;
-		spin_unlock(&sdei_list_lock);
-
+	if (err)
 		sdei_do_cross_call(_local_event_unregister, event);
-	}
 
 	return err;
 }
@@ -630,8 +619,17 @@ int sdei_event_register(u32 event_num, sdei_event_callback *cb, void *arg)
 			break;
 		}
 
+		spin_lock(&sdei_list_lock);
+		event->reregister = true;
+		spin_unlock(&sdei_list_lock);
+
 		err = _sdei_event_register(event);
 		if (err) {
+			spin_lock(&sdei_list_lock);
+			event->reregister = false;
+			event->reenable = false;
+			spin_unlock(&sdei_list_lock);
+
 			sdei_event_destroy(event);
 			pr_warn("Failed to register event %u: %d\n", event_num,
 				err);
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/32] null_blk: Fix the null_add_dev() error path

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 2004bfdef945fe55196db6b9cdf321fbc75bb0de ]

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x26/0x260
 __kasan_report.cold+0x7b/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_kmalloc+0xd/0x10
 kmem_cache_alloc_node_trace+0x129/0x4c0
 null_add_dev+0x24a/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
 save_stack+0x23/0x90
 __kasan_slab_free+0x112/0x160
 kasan_slab_free+0x12/0x20
 kfree+0xdf/0x250
 null_add_dev+0xaf3/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c8684f96 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index c5c0b7c894815..002072429290e 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1844,6 +1844,7 @@ static int null_add_dev(struct nullb_device *dev)
 	cleanup_queues(nullb);
 out_free_nullb:
 	kfree(nullb);
+	dev->nullb = NULL;
 out:
 	return rv;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/32] null_blk: Handle null_add_dev() failures properly

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 9b03b713082a31a5b90e0a893c72aa620e255c26 ]

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 002072429290e..78355a0e61db6 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1480,7 +1480,12 @@ static void cleanup_queues(struct nullb *nullb)
 
 static void null_del_dev(struct nullb *nullb)
 {
-	struct nullb_device *dev = nullb->dev;
+	struct nullb_device *dev;
+
+	if (!nullb)
+		return;
+
+	dev = nullb->dev;
 
 	ida_simple_remove(&nullb_indexes, nullb->index);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/32] null_blk: fix spurious IO errors after failed past-wp access

[Sasha Levin]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit ff77042296d0a54535ddf74412c5ae92cb4ec76a ]

Steps to reproduce:

	BLKRESETZONE zone 0

	// force EIO
	pwrite(fd, buf, 4096, 4096);

	[issue more IO including zone ioctls]

It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.

The fix is of course to clear ->error where necessary.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 78355a0e61db6..d2d7dc9cd58d2 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -571,6 +571,7 @@ static struct nullb_cmd *__alloc_cmd(struct nullb_queue *nq)
 	if (tag != -1U) {
 		cmd = &nq->cmds[tag];
 		cmd->tag = tag;
+		cmd->error = BLK_STS_OK;
 		cmd->nq = nq;
 		if (nq->dev->irqmode == NULL_IRQ_TIMER) {
 			hrtimer_init(&cmd->timer, CLOCK_MONOTONIC,
@@ -1433,6 +1434,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 		cmd->timer.function = null_cmd_timer_expired;
 	}
 	cmd->rq = bd->rq;
+	cmd->error = BLK_STS_OK;
 	cmd->nq = nq;
 
 	blk_mq_start_request(bd->rq);
-- 
2.20.1

[PATCH AUTOSEL 4.19 07/32] xhci: bail out early if driver can't accress host in resume

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 72ae194704da212e2ec312ab182a96799d070755 ]

Bail out early if the xHC host needs to be reset at resume
but driver can't access xHC PCI registers.

If xhci driver already fails to reset the controller then there
is no point in attempting to free, re-initialize, re-allocate and
re-start the host. If failure to access the host is detected later,
failing the resume, xhci interrupts will be double freed
when remove is called.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 65cc362717fcb..b4177287d7d0f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1147,8 +1147,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_zero_64b_regs(xhci);
-		xhci_reset(xhci);
+		retval = xhci_reset(xhci);
 		spin_unlock_irq(&xhci->lock);
+		if (retval)
+			return retval;
 		xhci_cleanup_msix(xhci);
 
 		xhci_dbg(xhci, "// Disabling event ring interrupts\n");
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/32] x86: Don't let pgprot_modify() change the page encryption bit

[Sasha Levin]

From: Thomas Hellstrom <thellstrom@vmware.com>

[ Upstream commit 6db73f17c5f155dbcfd5e48e621c706270b84df0 ]

When SEV or SME is enabled and active, vm_get_page_prot() typically
returns with the encryption bit set. This means that users of
pgprot_modify(, vm_get_page_prot()) (mprotect_fixup(), do_mmap()) end up
with a value of vma->vm_pg_prot that is not consistent with the intended
protection of the PTEs.

This is also important for fault handlers that rely on the VMA
vm_page_prot to set the page protection. Fix this by not allowing
pgprot_modify() to change the encryption bit, similar to how it's done
for PAT bits.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-2-thomas_os@shipmail.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/pgtable.h       | 7 +++++--
 arch/x86/include/asm/pgtable_types.h | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 690c0307afed0..2e1ed12c65f82 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -608,12 +608,15 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 	return __pmd(val);
 }
 
-/* mprotect needs to preserve PAT bits when updating vm_page_prot */
+/*
+ * mprotect needs to preserve PAT and encryption bits when updating
+ * vm_page_prot
+ */
 #define pgprot_modify pgprot_modify
 static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 {
 	pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
-	pgprotval_t addbits = pgprot_val(newprot);
+	pgprotval_t addbits = pgprot_val(newprot) & ~_PAGE_CHG_MASK;
 	return __pgprot(preservebits | addbits);
 }
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 106b7d0e2dae5..71ea49e7db747 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -124,7 +124,7 @@
  */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
 			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
-			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP)
+			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/32] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit e74d93e96d721c4297f2a900ad0191890d2fc2b0 ]

Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.

Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.

This patch updates io_pages after merging limits in disk_stack_limits().

Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.

Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-settings.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index be9b39caadbd2..01093b8f3e624 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -717,6 +717,9 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
 		       top, bottom);
 	}
+
+	t->backing_dev_info->io_pages =
+		t->limits.max_sectors >> (PAGE_SHIFT - 9);
 }
 EXPORT_SYMBOL(disk_stack_limits);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/32] irqchip/versatile-fpga: Handle chained IRQs properly

[Sasha Levin]

From: Sungbo Eo <mans0n@gorani.run>

[ Upstream commit 486562da598c59e9f835b551d7cf19507de2d681 ]

Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.

This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.

Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-versatile-fpga.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 928858dada756..70e2cfff8175f 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -6,6 +6,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqchip/versatile-fpga.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
@@ -68,12 +69,16 @@ static void fpga_irq_unmask(struct irq_data *d)
 
 static void fpga_irq_handle(struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct fpga_irq_data *f = irq_desc_get_handler_data(desc);
-	u32 status = readl(f->base + IRQ_STATUS);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
 
+	status = readl(f->base + IRQ_STATUS);
 	if (status == 0) {
 		do_bad_IRQ(desc);
-		return;
+		goto out;
 	}
 
 	do {
@@ -82,6 +87,9 @@ static void fpga_irq_handle(struct irq_desc *desc)
 		status &= ~(1 << irq);
 		generic_handle_irq(irq_find_mapping(f->domain, irq));
 	} while (status);
+
+out:
+	chained_irq_exit(chip, desc);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/32] sched: Avoid scale real weight down to zero

[Sasha Levin]

From: Michael Wang <yun.wang@linux.alibaba.com>

[ Upstream commit 26cf52229efc87e2effa9d788f9b33c40fb3358a ]

During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:

  /sys/fs/cgroup/cpu/A		(shares=102400)
  /sys/fs/cgroup/cpu/A/B	(shares=2)
  /sys/fs/cgroup/cpu/A/B/C	(shares=1024)

  /sys/fs/cgroup/cpu/D		(shares=1024)
  /sys/fs/cgroup/cpu/D/E	(shares=1024)
  /sys/fs/cgroup/cpu/D/E/F	(shares=1024)

The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.

We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.

The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.

And in calc_group_shares() we calculate shares as:

  load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
  shares = (tg_shares * load) / tg_weight;

Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.

While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.

Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.

This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/sched.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 94bec97bd5e28..5f0eb4565957f 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -123,7 +123,13 @@ static inline void cpu_load_update_active(struct rq *this_rq) { }
 #ifdef CONFIG_64BIT
 # define NICE_0_LOAD_SHIFT	(SCHED_FIXEDPOINT_SHIFT + SCHED_FIXEDPOINT_SHIFT)
 # define scale_load(w)		((w) << SCHED_FIXEDPOINT_SHIFT)
-# define scale_load_down(w)	((w) >> SCHED_FIXEDPOINT_SHIFT)
+# define scale_load_down(w) \
+({ \
+	unsigned long __w = (w); \
+	if (__w) \
+		__w = max(2UL, __w >> SCHED_FIXEDPOINT_SHIFT); \
+	__w; \
+})
 #else
 # define NICE_0_LOAD_SHIFT	(SCHED_FIXEDPOINT_SHIFT)
 # define scale_load(w)		(w)
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/32] selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

[Sasha Levin]

From: Andy Lutomirski <luto@kernel.org>

[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ]

If AT_SYSINFO is not present, don't try to call a NULL pointer.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/x86/ptrace_syscall.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c
index 6f22238f32173..12aaa063196e7 100644
--- a/tools/testing/selftests/x86/ptrace_syscall.c
+++ b/tools/testing/selftests/x86/ptrace_syscall.c
@@ -414,8 +414,12 @@ int main()
 
 #if defined(__i386__) && (!defined(__GLIBC__) || __GLIBC__ > 2 || __GLIBC_MINOR__ >= 16)
 	vsyscall32 = (void *)getauxval(AT_SYSINFO);
-	printf("[RUN]\tCheck AT_SYSINFO return regs\n");
-	test_sys32_regs(do_full_vsyscall32);
+	if (vsyscall32) {
+		printf("[RUN]\tCheck AT_SYSINFO return regs\n");
+		test_sys32_regs(do_full_vsyscall32);
+	} else {
+		printf("[SKIP]\tAT_SYSINFO is not available\n");
+	}
 #endif
 
 	test_ptrace_syscall_restart();
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/32] PCI/switchtec: Fix init_completion race condition with poll_wait()

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit efbdc769601f4d50018bf7ca50fc9f7c67392ece ]

The call to init_completion() in mrpc_queue_cmd() can theoretically
race with the call to poll_wait() in switchtec_dev_poll().

  poll()			write()
    switchtec_dev_poll()   	  switchtec_dev_write()
      poll_wait(&s->comp.wait);      mrpc_queue_cmd()
			               init_completion(&s->comp)
				         init_waitqueue_head(&s->comp.wait)

To my knowledge, no one has hit this bug.

Fix this by using reinit_completion() instead of init_completion() in
mrpc_queue_cmd().

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/20200313183608.2646-1-logang@deltatee.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 43431816412c1..291c0074ad6f4 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -147,7 +147,7 @@ static int mrpc_queue_cmd(struct switchtec_user *stuser)
 	kref_get(&stuser->kref);
 	stuser->read_len = sizeof(stuser->data);
 	stuser_set_state(stuser, MRPC_QUEUED);
-	init_completion(&stuser->comp);
+	reinit_completion(&stuser->comp);
 	list_add_tail(&stuser->list, &stdev->mrpc_queue);
 
 	mrpc_cmd_submit(stdev);
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/32] media: i2c: video-i2c: fix build errors due to 'imply hwmon'

[Sasha Levin]

From: Matt Ranostay <matt.ranostay@konsulko.com>

[ Upstream commit 64d4fc9926f09861a35d8f0f7d81f056e6d5af7b ]

Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.

Issue build log:

ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info

Cc: rdunlap@infradead.org
Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx)
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/video-i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
index f27d294dcbef5..dd50acc085d89 100644
--- a/drivers/media/i2c/video-i2c.c
+++ b/drivers/media/i2c/video-i2c.c
@@ -105,7 +105,7 @@ static int amg88xx_xfer(struct video_i2c_data *data, char *buf)
 	return (ret == 2) ? 0 : -EIO;
 }
 
-#if IS_ENABLED(CONFIG_HWMON)
+#if IS_REACHABLE(CONFIG_HWMON)
 
 static const u32 amg88xx_temp_config[] = {
 	HWMON_T_INPUT,
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/32] libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ]

If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
	...
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (!ap)
			continue;

		if (ap->scsi_host)
			scsi_host_put(ap->scsi_host);

	}
	...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-scsi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3a64fa4aaf7e3..0c1572a1cc5ed 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4570,22 +4570,19 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		 */
 		shost->max_host_blocked = 1;
 
-		rc = scsi_add_host_with_dma(ap->scsi_host,
-						&ap->tdev, ap->host->dev);
+		rc = scsi_add_host_with_dma(shost, &ap->tdev, ap->host->dev);
 		if (rc)
-			goto err_add;
+			goto err_alloc;
 	}
 
 	return 0;
 
- err_add:
-	scsi_host_put(host->ports[i]->scsi_host);
  err_alloc:
 	while (--i >= 0) {
 		struct Scsi_Host *shost = host->ports[i]->scsi_host;
 
+		/* scsi_host_put() is in ata_devres_release() */
 		scsi_remove_host(shost);
-		scsi_host_put(shost);
 	}
 	return rc;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/32] pstore/platform: fix potential mem leak if pstore_init_fs failed

[Sasha Levin]

From: chenqiwu <chenqiwu@xiaomi.com>

[ Upstream commit 8a57d6d4ddfa41c49014e20493152c41a38fcbf8 ]

There is a potential mem leak when pstore_init_fs failed,
since the pstore compression maybe unlikey to initialized
successfully. We must clean up the allocation once this
unlikey issue happens.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Link: https://lore.kernel.org/r/1581068800-13817-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 4bae3f4fe829d..dcd9c3163587c 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -802,9 +802,9 @@ static int __init pstore_init(void)
 
 	ret = pstore_init_fs();
 	if (ret)
-		return ret;
+		free_buf_for_compression();
 
-	return 0;
+	return ret;
 }
 late_initcall(pstore_init);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/32] gfs2: Don't demote a glock until its revokes are written

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit df5db5f9ee112e76b5202fbc331f990a0fc316d6 ]

Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.

This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ccdd8c821abd7..f8a5eef3d014b 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -636,6 +636,9 @@ __acquires(&gl->gl_lockref.lock)
 			goto out_unlock;
 		if (nonblock)
 			goto out_sched;
+		smp_mb();
+		if (atomic_read(&gl->gl_revokes) != 0)
+			goto out_sched;
 		set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
 		GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
 		gl->gl_target = gl->gl_demote_state;
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/32] x86/boot: Use unsigned comparison for addresses

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 81a34892c2c7c809f9c4e22c5ac936ae673fb9a2 ]

The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).

When loading a 64-bit kernel using the new efi32_pe_entry() point added by:

  97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")

using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.

Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/boot/compressed/head_32.S | 2 +-
 arch/x86/boot/compressed/head_64.S | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 37380c0d59996..01d628ea34024 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -106,7 +106,7 @@ ENTRY(startup_32)
 	notl	%eax
 	andl    %eax, %ebx
 	cmpl	$LOAD_PHYSICAL_ADDR, %ebx
-	jge	1f
+	jae	1f
 #endif
 	movl	$LOAD_PHYSICAL_ADDR, %ebx
 1:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 4eaa724afce34..9fa644c62839f 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -106,7 +106,7 @@ ENTRY(startup_32)
 	notl	%eax
 	andl	%eax, %ebx
 	cmpl	$LOAD_PHYSICAL_ADDR, %ebx
-	jge	1f
+	jae	1f
 #endif
 	movl	$LOAD_PHYSICAL_ADDR, %ebx
 1:
@@ -297,7 +297,7 @@ ENTRY(startup_64)
 	notq	%rax
 	andq	%rax, %rbp
 	cmpq	$LOAD_PHYSICAL_ADDR, %rbp
-	jge	1f
+	jae	1f
 #endif
 	movq	$LOAD_PHYSICAL_ADDR, %rbp
 1:
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/32] efi/x86: Ignore the memory attributes table on i386

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit dd09fad9d2caad2325a39b766ce9e79cfc690184 ]

Commit:

  3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")

moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.

We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:

  ------------[ cut here ]------------
  ioremap on RAM at 0x3f251000 - 0x3fa1afff
  WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  EIP: __ioremap_caller.constprop.0+0x249/0x260
  Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
  EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
  ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
  CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
  Call Trace:
   ioremap_cache+0xd/0x10
   ? old_map_region+0x72/0x9d
   old_map_region+0x72/0x9d
   efi_map_region+0x8/0xa
   efi_enter_virtual_mode+0x260/0x43b
   start_kernel+0x329/0x3aa
   i386_start_kernel+0xa7/0xab
   startup_32_smp+0x164/0x168
  ---[ end trace e15ccf6b9f356833 ]---

Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.

Fixes: 3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/efi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index d54fca902e64f..f1e0a27152691 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -572,7 +572,7 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz,
 		}
 	}
 
-	if (efi_enabled(EFI_MEMMAP))
+	if (!IS_ENABLED(CONFIG_X86_32) && efi_enabled(EFI_MEMMAP))
 		efi_memattr_init();
 
 	efi_tpm_eventlog_init();
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/32] genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()

[Sasha Levin]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 87f2d1c662fa1761359fdf558246f97e484d177a ]

irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit
but only one of them checks for the pointer which is being dereferenced
inside the called function. Move the check into the function. This allows
for catching the error instead of the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140
...
[<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc)
[<c0462a89>] (__irq_domain_alloc_irqs)
[<c0462dad>] (irq_create_fwspec_mapping)
[<c06c2251>] (gpiochip_to_irq)
[<c06c1c9b>] (gpiod_to_irq)
[<bf973073>] (gpio_irqs_init [gpio_irqs])
[<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs])
Code: bad PC value

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306174720.82604-1-alexander.sverdlin@nokia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/irq/irqdomain.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index e0eda2bd39753..0a76c44eb6b29 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1255,6 +1255,11 @@ int irq_domain_alloc_irqs_hierarchy(struct irq_domain *domain,
 				    unsigned int irq_base,
 				    unsigned int nr_irqs, void *arg)
 {
+	if (!domain->ops->alloc) {
+		pr_debug("domain->ops->alloc() is NULL\n");
+		return -ENOSYS;
+	}
+
 	return domain->ops->alloc(domain, irq_base, nr_irqs, arg);
 }
 
@@ -1292,11 +1297,6 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
 			return -EINVAL;
 	}
 
-	if (!domain->ops->alloc) {
-		pr_debug("domain->ops->alloc() is NULL\n");
-		return -ENOSYS;
-	}
-
 	if (realloc && irq_base >= 0) {
 		virq = irq_base;
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/32] block: Fix use-after-free issue accessing struct io_cq

[Sasha Levin]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit 30a2da7b7e225ef6c87a660419ea04d3cef3f6a7 ]

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1:				context#2:
ioc_release_fn()			__ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock);		->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
  	icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
					->ioc_destroy_icq(icq);
					  ->hlist_del_init(&icq->ioc_node);
					  This results into below crash as this memory
					  is now used by icq->__rcu_head in context#1.
					  There is a chance that icq could be free'd
					  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-ioc.c           | 7 +++++++
 include/linux/iocontext.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 01580f88fcb39..4c810969c3e2f 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -87,6 +87,7 @@ static void ioc_destroy_icq(struct io_cq *icq)
 	 * making it impossible to determine icq_cache.  Record it in @icq.
 	 */
 	icq->__rcu_icq_cache = et->icq_cache;
+	icq->flags |= ICQ_DESTROYED;
 	call_rcu(&icq->__rcu_head, icq_free_icq_rcu);
 }
 
@@ -230,15 +231,21 @@ static void __ioc_clear_queue(struct list_head *icq_list)
 {
 	unsigned long flags;
 
+	rcu_read_lock();
 	while (!list_empty(icq_list)) {
 		struct io_cq *icq = list_entry(icq_list->next,
 					       struct io_cq, q_node);
 		struct io_context *ioc = icq->ioc;
 
 		spin_lock_irqsave(&ioc->lock, flags);
+		if (icq->flags & ICQ_DESTROYED) {
+			spin_unlock_irqrestore(&ioc->lock, flags);
+			continue;
+		}
 		ioc_destroy_icq(icq);
 		spin_unlock_irqrestore(&ioc->lock, flags);
 	}
+	rcu_read_unlock();
 }
 
 /**
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dba15ca8e60bc..1dcd9198beb7f 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -8,6 +8,7 @@
 
 enum {
 	ICQ_EXITED		= 1 << 2,
+	ICQ_DESTROYED		= 1 << 3,
 };
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/32] media: i2c: ov5695: Fix power on and off sequences

[Sasha Levin]

From: Dongchun Zhu <dongchun.zhu@mediatek.com>

[ Upstream commit f1a64f56663e9d03e509439016dcbddd0166b2da ]

From the measured hardware signal, OV5695 reset pin goes high for a
short period of time during boot-up. From the sensor specification, the
reset pin is active low and the DT binding defines the pin as active
low, which means that the values set by the driver are inverted and thus
the value requested in probe ends up high.

Fix it by changing probe to request the reset GPIO initialized to high,
which makes the initial state of the physical signal low.

In addition, DOVDD rising must occur before DVDD rising from spec., but
regulator_bulk_enable() API enables all the regulators asynchronously.
Use an explicit loops of regulator_enable() instead.

For power off sequence, it is required that DVDD falls first. Given the
bulk API does not give any guarantee about the order of regulators,
change the driver to use regulator_disable() instead.

The sensor also requires a delay between reset high and first I2C
transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is
recommended by the vendor. Fix this as well.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov5695.c | 49 ++++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index 5d107c53364d6..be242bb8fefcd 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -974,16 +974,9 @@ static int ov5695_s_stream(struct v4l2_subdev *sd, int on)
 	return ret;
 }
 
-/* Calculate the delay in us by clock rate and clock cycles */
-static inline u32 ov5695_cal_delay(u32 cycles)
-{
-	return DIV_ROUND_UP(cycles, OV5695_XVCLK_FREQ / 1000 / 1000);
-}
-
 static int __ov5695_power_on(struct ov5695 *ov5695)
 {
-	int ret;
-	u32 delay_us;
+	int i, ret;
 	struct device *dev = &ov5695->client->dev;
 
 	ret = clk_prepare_enable(ov5695->xvclk);
@@ -994,21 +987,28 @@ static int __ov5695_power_on(struct ov5695 *ov5695)
 
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
 
-	ret = regulator_bulk_enable(OV5695_NUM_SUPPLIES, ov5695->supplies);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable regulators\n");
-		goto disable_clk;
+	/*
+	 * The hardware requires the regulators to be powered on in order,
+	 * so enable them one by one.
+	 */
+	for (i = 0; i < OV5695_NUM_SUPPLIES; i++) {
+		ret = regulator_enable(ov5695->supplies[i].consumer);
+		if (ret) {
+			dev_err(dev, "Failed to enable %s: %d\n",
+				ov5695->supplies[i].supply, ret);
+			goto disable_reg_clk;
+		}
 	}
 
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 0);
 
-	/* 8192 cycles prior to first SCCB transaction */
-	delay_us = ov5695_cal_delay(8192);
-	usleep_range(delay_us, delay_us * 2);
+	usleep_range(1000, 1200);
 
 	return 0;
 
-disable_clk:
+disable_reg_clk:
+	for (--i; i >= 0; i--)
+		regulator_disable(ov5695->supplies[i].consumer);
 	clk_disable_unprepare(ov5695->xvclk);
 
 	return ret;
@@ -1016,9 +1016,22 @@ static int __ov5695_power_on(struct ov5695 *ov5695)
 
 static void __ov5695_power_off(struct ov5695 *ov5695)
 {
+	struct device *dev = &ov5695->client->dev;
+	int i, ret;
+
 	clk_disable_unprepare(ov5695->xvclk);
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
-	regulator_bulk_disable(OV5695_NUM_SUPPLIES, ov5695->supplies);
+
+	/*
+	 * The hardware requires the regulators to be powered off in order,
+	 * so disable them one by one.
+	 */
+	for (i = OV5695_NUM_SUPPLIES - 1; i >= 0; i--) {
+		ret = regulator_disable(ov5695->supplies[i].consumer);
+		if (ret)
+			dev_err(dev, "Failed to disable %s: %d\n",
+				ov5695->supplies[i].supply, ret);
+	}
 }
 
 static int __maybe_unused ov5695_runtime_resume(struct device *dev)
@@ -1288,7 +1301,7 @@ static int ov5695_probe(struct i2c_client *client,
 	if (clk_get_rate(ov5695->xvclk) != OV5695_XVCLK_FREQ)
 		dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
 
-	ov5695->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	ov5695->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ov5695->reset_gpio)) {
 		dev_err(dev, "Failed to get reset-gpios\n");
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/32] usb: dwc3: core: add support for disabling SS instances in park mode

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
 xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
 usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 5 +++++
 drivers/usb/dwc3/core.h | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6666d2a52bf56..60d08269ad9a0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -981,6 +981,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->dis_tx_ipgap_linecheck_quirk)
 			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
 
+		if (dwc->parkmode_disable_ss_quirk)
+			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
@@ -1287,6 +1290,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,dis-del-phy-power-chg-quirk");
 	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
 				"snps,dis-tx-ipgap-linecheck-quirk");
+	dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+				"snps,parkmode-disable-ss-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 131028501752b..e34308d64619e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -242,6 +242,7 @@
 #define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
 
 /* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
 
@@ -992,6 +993,8 @@ struct dwc3_scratchpad_array {
  *			change quirk.
  * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
  *			check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ *			instances in park mode.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0	- -6dB de-emphasis
@@ -1163,6 +1166,7 @@ struct dwc3 {
 	unsigned		dis_u2_freeclk_exists_quirk:1;
 	unsigned		dis_del_phy_power_chg_quirk:1;
 	unsigned		dis_tx_ipgap_linecheck_quirk:1;
+	unsigned		parkmode_disable_ss_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/32] irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 7809f7011c3bce650e502a98afeb05961470d865 ]

On a very heavily loaded D05 with GICv4, I managed to trigger the
following lockdep splat:

[ 6022.598864] ======================================================
[ 6022.605031] WARNING: possible circular locking dependency detected
[ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 #680 Tainted: G            E
[ 6022.618061] ------------------------------------------------------
[ 6022.624227] qemu-system-aar/7569 is trying to acquire lock:
[ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0
[ 6022.637102]
[ 6022.637102] but task is already holding lock:
[ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98
[ 6022.651350]
[ 6022.651350] which lock already depends on the new lock.
[ 6022.651350]
[ 6022.659512]
[ 6022.659512] the existing dependency chain (in reverse order) is:
[ 6022.666980]
[ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}:
[ 6022.672983]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.677848]        __irq_get_desc_lock+0x5c/0x98
[ 6022.682453]        irq_set_vcpu_affinity+0x40/0xc0
[ 6022.687236]        its_make_vpe_non_resident+0x6c/0xb8
[ 6022.692364]        vgic_v4_put+0x54/0x70
[ 6022.696273]        vgic_v3_put+0x20/0xd8
[ 6022.700183]        kvm_vgic_put+0x30/0x48
[ 6022.704182]        kvm_arch_vcpu_put+0x34/0x50
[ 6022.708614]        kvm_sched_out+0x34/0x50
[ 6022.712700]        __schedule+0x4bc/0x7f8
[ 6022.716697]        schedule+0x50/0xd8
[ 6022.720347]        kvm_arch_vcpu_ioctl_run+0x5f0/0x978
[ 6022.725473]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.729820]        ksys_ioctl+0x90/0xd0
[ 6022.733642]        __arm64_sys_ioctl+0x24/0x30
[ 6022.738074]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.743373]        do_el0_svc+0x28/0x88
[ 6022.747198]        el0_svc+0x14/0x40
[ 6022.750761]        el0_sync_handler+0x124/0x2b8
[ 6022.755278]        el0_sync+0x140/0x180
[ 6022.759100]
[ 6022.759100] -> #1 (&rq->lock){-.-.}:
[ 6022.764143]        _raw_spin_lock+0x38/0x50
[ 6022.768314]        task_fork_fair+0x40/0x128
[ 6022.772572]        sched_fork+0xe0/0x210
[ 6022.776484]        copy_process+0x8c4/0x18d8
[ 6022.780742]        _do_fork+0x88/0x6d8
[ 6022.784478]        kernel_thread+0x64/0x88
[ 6022.788563]        rest_init+0x30/0x270
[ 6022.792390]        arch_call_rest_init+0x14/0x1c
[ 6022.796995]        start_kernel+0x498/0x4c4
[ 6022.801164]
[ 6022.801164] -> #0 (&p->pi_lock){-.-.}:
[ 6022.806382]        __lock_acquire+0xdd8/0x15c8
[ 6022.810813]        lock_acquire+0xd0/0x218
[ 6022.814896]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.819761]        try_to_wake_up+0x54/0x7a0
[ 6022.824018]        wake_up_process+0x1c/0x28
[ 6022.828276]        wakeup_softirqd+0x38/0x40
[ 6022.832533]        __tasklet_schedule_common+0xc4/0xf0
[ 6022.837658]        __tasklet_schedule+0x24/0x30
[ 6022.842176]        check_irq_resend+0xc8/0x158
[ 6022.846609]        irq_startup+0x74/0x128
[ 6022.850606]        __enable_irq+0x6c/0x78
[ 6022.854602]        enable_irq+0x54/0xa0
[ 6022.858431]        its_make_vpe_non_resident+0xa4/0xb8
[ 6022.863557]        vgic_v4_put+0x54/0x70
[ 6022.867469]        kvm_arch_vcpu_blocking+0x28/0x38
[ 6022.872336]        kvm_vcpu_block+0x48/0x490
[ 6022.876594]        kvm_handle_wfx+0x18c/0x310
[ 6022.880938]        handle_exit+0x138/0x198
[ 6022.885022]        kvm_arch_vcpu_ioctl_run+0x4d4/0x978
[ 6022.890148]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.894494]        ksys_ioctl+0x90/0xd0
[ 6022.898317]        __arm64_sys_ioctl+0x24/0x30
[ 6022.902748]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.908046]        do_el0_svc+0x28/0x88
[ 6022.911871]        el0_svc+0x14/0x40
[ 6022.915434]        el0_sync_handler+0x124/0x2b8
[ 6022.919951]        el0_sync+0x140/0x180
[ 6022.923773]
[ 6022.923773] other info that might help us debug this:
[ 6022.923773]
[ 6022.931762] Chain exists of:
[ 6022.931762]   &p->pi_lock --> &rq->lock --> &irq_desc_lock_class
[ 6022.931762]
[ 6022.942101]  Possible unsafe locking scenario:
[ 6022.942101]
[ 6022.948007]        CPU0                    CPU1
[ 6022.952523]        ----                    ----
[ 6022.957039]   lock(&irq_desc_lock_class);
[ 6022.961036]                                lock(&rq->lock);
[ 6022.966595]                                lock(&irq_desc_lock_class);
[ 6022.973109]   lock(&p->pi_lock);
[ 6022.976324]
[ 6022.976324]  *** DEADLOCK ***

This is happening because we have a pending doorbell that requires
retrigger. As SW retriggering is done in a tasklet, we trigger the
circular dependency above.

The easy cop-out is to provide a retrigger callback that doesn't
require acquiring any extra lock.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-5-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index f9b73336a39ee..fe7d63cdfb1d7 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2858,12 +2858,18 @@ static int its_vpe_set_irqchip_state(struct irq_data *d,
 	return 0;
 }
 
+static int its_vpe_retrigger(struct irq_data *d)
+{
+	return !its_vpe_set_irqchip_state(d, IRQCHIP_STATE_PENDING, true);
+}
+
 static struct irq_chip its_vpe_irq_chip = {
 	.name			= "GICv4-vpe",
 	.irq_mask		= its_vpe_mask_irq,
 	.irq_unmask		= its_vpe_unmask_irq,
 	.irq_eoi		= irq_chip_eoi_parent,
 	.irq_set_affinity	= its_vpe_set_affinity,
+	.irq_retrigger		= its_vpe_retrigger,
 	.irq_set_irqchip_state	= its_vpe_set_irqchip_state,
 	.irq_set_vcpu_affinity	= its_vpe_set_vcpu_affinity,
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/32] md: check arrays is suspended in mddev_detach before call quiesce operations

[Sasha Levin]

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit 6b40bec3b13278d21fa6c1ae7a0bdf2e550eed5f ]

Don't call quiesce(1) and quiesce(0) if array is already suspended,
otherwise in level_store, the array is writable after mddev_detach
in below part though the intention is to make array writable after
resume.

	mddev_suspend(mddev);
	mddev_detach(mddev);
	...
	mddev_resume(mddev);

And it also causes calltrace as follows in [1].

[48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90
[...]
[48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G           OE     5.4.10-arch1-1 #1
[48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018
[48005.653984] RIP: 0010:kthread_park+0x77/0x90
[48005.654015] Call Trace:
[48005.654039]  r5l_quiesce+0x3c/0x70 [raid456]
[48005.654052]  raid5_quiesce+0x228/0x2e0 [raid456]
[48005.654073]  mddev_detach+0x30/0x70 [md_mod]
[48005.654090]  level_store+0x202/0x670 [md_mod]
[48005.654099]  ? security_capable+0x40/0x60
[48005.654114]  md_attr_store+0x7b/0xc0 [md_mod]
[48005.654123]  kernfs_fop_write+0xce/0x1b0
[48005.654132]  vfs_write+0xb6/0x1a0
[48005.654138]  ksys_write+0x67/0xe0
[48005.654146]  do_syscall_64+0x4e/0x140
[48005.654155]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[48005.654161] RIP: 0033:0x7fa0c8737497

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 62f214d43e15a..9426976e0860d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5874,7 +5874,7 @@ EXPORT_SYMBOL_GPL(md_stop_writes);
 static void mddev_detach(struct mddev *mddev)
 {
 	md_bitmap_wait_behind_writes(mddev);
-	if (mddev->pers && mddev->pers->quiesce) {
+	if (mddev->pers && mddev->pers->quiesce && !mddev->suspended) {
 		mddev->pers->quiesce(mddev, 1);
 		mddev->pers->quiesce(mddev, 0);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/32] firmware: fix a double abort case with fw_load_sysfs_fallback

[Sasha Levin]

From: Junyong Sun <sunjy516@gmail.com>

[ Upstream commit bcfbd3523f3c6eea51a74d217a8ebc5463bcb7f4 ]

fw_sysfs_wait_timeout may return err with -ENOENT
at fw_load_sysfs_fallback and firmware is already
in abort status, no need to abort again, so skip it.

This issue is caused by concurrent situation like below:
when thread 1# wait firmware loading, thread 2# may write
-1 to abort loading and wakeup thread 1# before it timeout.
so wait_for_completion_killable_timeout of thread 1# would
return remaining time which is != 0 with fw_st->status
FW_STATUS_ABORTED.And the results would be converted into
err -ENOENT in __fw_state_wait_common and transfered to
fw_load_sysfs_fallback in thread 1#.
The -ENOENT means firmware status is already at ABORTED,
so fw_load_sysfs_fallback no need to get mutex to abort again.
-----------------------------
thread 1#,wait for loading
fw_load_sysfs_fallback
 ->fw_sysfs_wait_timeout
    ->__fw_state_wait_common
       ->wait_for_completion_killable_timeout

in __fw_state_wait_common,
...
93    ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout);
94    if (ret != 0 && fw_st->status == FW_STATUS_ABORTED)
95       return -ENOENT;
96    if (!ret)
97	 return -ETIMEDOUT;
98
99    return ret < 0 ? ret : 0;
-----------------------------
thread 2#, write -1 to abort loading
firmware_loading_store
 ->fw_load_abort
   ->__fw_load_abort
     ->fw_state_aborted
       ->__fw_state_set
         ->complete_all

in __fw_state_set,
...
111    if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED)
112       complete_all(&fw_st->completion);
-------------------------------------------
BTW,the double abort issue would not cause kernel panic or create an issue,
but slow down it sometimes.The change is just a minor optimization.

Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/firmware_loader/fallback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/firmware_loader/fallback.c b/drivers/base/firmware_loader/fallback.c
index 818d8c37d70a9..3b7b748c4d4f2 100644
--- a/drivers/base/firmware_loader/fallback.c
+++ b/drivers/base/firmware_loader/fallback.c
@@ -572,7 +572,7 @@ static int fw_load_sysfs_fallback(struct fw_sysfs *fw_sysfs,
 	}
 
 	retval = fw_sysfs_wait_timeout(fw_priv, timeout);
-	if (retval < 0) {
+	if (retval < 0 && retval != -ENOENT) {
 		mutex_lock(&fw_lock);
 		fw_load_abort(fw_sysfs);
 		mutex_unlock(&fw_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/32] locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()

[Sasha Levin]

From: Boqun Feng <boqun.feng@gmail.com>

[ Upstream commit 25016bd7f4caf5fc983bbab7403d08e64cba3004 ]

Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:

  [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
  ...
  [ ] Call Trace:
  [ ]  lock_is_held_type+0x5d/0x150
  [ ]  ? rcu_lockdep_current_cpu_online+0x64/0x80
  [ ]  rcu_read_lock_any_held+0xac/0x100
  [ ]  ? rcu_read_lock_held+0xc0/0xc0
  [ ]  ? __slab_free+0x421/0x540
  [ ]  ? kasan_kmalloc+0x9/0x10
  [ ]  ? __kmalloc_node+0x1d7/0x320
  [ ]  ? kvmalloc_node+0x6f/0x80
  [ ]  __bfs+0x28a/0x3c0
  [ ]  ? class_equal+0x30/0x30
  [ ]  lockdep_count_forward_deps+0x11a/0x1a0

The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.

Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 1e272f6a01e73..8a1758b094b70 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -1260,9 +1260,11 @@ unsigned long lockdep_count_forward_deps(struct lock_class *class)
 	this.class = class;
 
 	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
 	arch_spin_lock(&lockdep_lock);
 	ret = __lockdep_count_forward_deps(&this);
 	arch_spin_unlock(&lockdep_lock);
+	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 
 	return ret;
@@ -1287,9 +1289,11 @@ unsigned long lockdep_count_backward_deps(struct lock_class *class)
 	this.class = class;
 
 	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
 	arch_spin_lock(&lockdep_lock);
 	ret = __lockdep_count_backward_deps(&this);
 	arch_spin_unlock(&lockdep_lock);
+	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.19 28/32] block, bfq: fix use-after-free in bfq_idle_slice_timer_body

[Sasha Levin]

From: Zhiqiang Liu <liuzhiqiang26@huawei.com>

[ Upstream commit 2f95fa5c955d0a9987ffdc3a095e2f4e62c5f2a9 ]

In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.

In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.

KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667]  dump_backtrace+0x0/0x310
[13058.354672]  show_stack+0x28/0x38
[13058.354681]  dump_stack+0xd8/0x108
[13058.354687]  print_address_description+0x68/0x2d0
[13058.354690]  kasan_report+0x124/0x2e0
[13058.354697]  __asan_load8+0x88/0xb0
[13058.354702]  bfq_idle_slice_timer+0xac/0x290
[13058.354707]  __hrtimer_run_queues+0x298/0x8b8
[13058.354710]  hrtimer_interrupt+0x1b8/0x678
[13058.354716]  arch_timer_handler_phys+0x4c/0x78
[13058.354722]  handle_percpu_devid_irq+0xf0/0x558
[13058.354731]  generic_handle_irq+0x50/0x70
[13058.354735]  __handle_domain_irq+0x94/0x110
[13058.354739]  gic_handle_irq+0x8c/0x1b0
[13058.354742]  el1_irq+0xb8/0x140
[13058.354748]  do_wp_page+0x260/0xe28
[13058.354752]  __handle_mm_fault+0x8ec/0x9b0
[13058.354756]  handle_mm_fault+0x280/0x460
[13058.354762]  do_page_fault+0x3ec/0x890
[13058.354765]  do_mem_abort+0xc0/0x1b0
[13058.354768]  el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780]  kasan_kmalloc+0xe0/0x190
[13058.354784]  kasan_slab_alloc+0x14/0x20
[13058.354788]  kmem_cache_alloc_node+0x130/0x440
[13058.354793]  bfq_get_queue+0x138/0x858
[13058.354797]  bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801]  bfq_init_rq+0x1f4/0x1180
[13058.354806]  bfq_insert_requests+0x264/0x1c98
[13058.354811]  blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818]  blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826]  blk_flush_plug_list+0x230/0x548
[13058.354830]  blk_finish_plug+0x60/0x80
[13058.354838]  read_pages+0xec/0x2c0
[13058.354842]  __do_page_cache_readahead+0x374/0x438
[13058.354846]  ondemand_readahead+0x24c/0x6b0
[13058.354851]  page_cache_sync_readahead+0x17c/0x2f8
[13058.354858]  generic_file_buffered_read+0x588/0xc58
[13058.354862]  generic_file_read_iter+0x1b4/0x278
[13058.354965]  ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972]  __vfs_read+0x238/0x320
[13058.354976]  vfs_read+0xbc/0x1c0
[13058.354980]  ksys_read+0xdc/0x1b8
[13058.354984]  __arm64_sys_read+0x50/0x60
[13058.354990]  el0_svc_common+0xb4/0x1d8
[13058.354994]  el0_svc_handler+0x50/0xa8
[13058.354998]  el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007]  __kasan_slab_free+0x120/0x228
[13058.355010]  kasan_slab_free+0x10/0x18
[13058.355014]  kmem_cache_free+0x288/0x3f0
[13058.355018]  bfq_put_queue+0x134/0x208
[13058.355022]  bfq_exit_icq_bfqq+0x164/0x348
[13058.355026]  bfq_exit_icq+0x28/0x40
[13058.355030]  ioc_exit_icq+0xa0/0x150
[13058.355035]  put_io_context_active+0x250/0x438
[13058.355038]  exit_io_context+0xd0/0x138
[13058.355045]  do_exit+0x734/0xc58
[13058.355050]  do_group_exit+0x78/0x220
[13058.355054]  __wake_up_parent+0x0/0x50
[13058.355058]  el0_svc_common+0xb4/0x1d8
[13058.355062]  el0_svc_handler+0x50/0xa8
[13058.355066]  el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797]  ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801]  ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808]                                                                 ^
[13058.370811]  ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815]  ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint

Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.

Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 66b1ebc21ce4f..5198ed1b36690 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5156,20 +5156,28 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
 	return bfqq;
 }
 
-static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
+static void
+bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 {
-	struct bfq_data *bfqd = bfqq->bfqd;
 	enum bfqq_expiration reason;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bfqd->lock, flags);
-	bfq_clear_bfqq_wait_request(bfqq);
 
+	/*
+	 * Considering that bfqq may be in race, we should firstly check
+	 * whether bfqq is in service before doing something on it. If
+	 * the bfqq in race is not in service, it has already been expired
+	 * through __bfq_bfqq_expire func and its wait_request flags has
+	 * been cleared in __bfq_bfqd_reset_in_service func.
+	 */
 	if (bfqq != bfqd->in_service_queue) {
 		spin_unlock_irqrestore(&bfqd->lock, flags);
 		return;
 	}
 
+	bfq_clear_bfqq_wait_request(bfqq);
+
 	if (bfq_bfqq_budget_timeout(bfqq))
 		/*
 		 * Also here the queue can be safely expired
@@ -5214,7 +5222,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
 	 * early.
 	 */
 	if (bfqq)
-		bfq_idle_slice_timer_body(bfqq);
+		bfq_idle_slice_timer_body(bfqd, bfqq);
 
 	return HRTIMER_NORESTART;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/32] btrfs: hold a ref on the root in btrfs_recover_relocation

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 932fd26df8125a5b14438563c4d3e33f59ba80f7 ]

We look up the fs root in various places in here when recovering from a
crashed relcoation.  Make sure we hold a ref on the root whenever we
look them up.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index f98913061a40c..377cf3785fbbd 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -4428,6 +4428,12 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 					err = ret;
 					goto out;
 				}
+			} else {
+				if (!btrfs_grab_fs_root(fs_root)) {
+					err = -ENOENT;
+					goto out;
+				}
+				btrfs_put_fs_root(fs_root);
 			}
 		}
 
@@ -4477,10 +4483,15 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 			list_add_tail(&reloc_root->root_list, &reloc_roots);
 			goto out_free;
 		}
+		if (!btrfs_grab_fs_root(fs_root)) {
+			err = -ENOENT;
+			goto out_free;
+		}
 
 		err = __add_reloc_root(reloc_root);
 		BUG_ON(err < 0); /* -ENOMEM or logic error */
 		fs_root->reloc_root = reloc_root;
+		btrfs_put_fs_root(fs_root);
 	}
 
 	err = btrfs_commit_transaction(trans);
@@ -4508,10 +4519,14 @@ int btrfs_recover_relocation(struct btrfs_root *root)
 	if (err == 0) {
 		/* cleanup orphan inode in data relocation tree */
 		fs_root = read_fs_root(fs_info, BTRFS_DATA_RELOC_TREE_OBJECTID);
-		if (IS_ERR(fs_root))
+		if (IS_ERR(fs_root)) {
 			err = PTR_ERR(fs_root);
-		else
-			err = btrfs_orphan_cleanup(fs_root);
+		} else {
+			if (btrfs_grab_fs_root(fs_root)) {
+				err = btrfs_orphan_cleanup(fs_root);
+				btrfs_put_fs_root(fs_root);
+			}
+		}
 	}
 	return err;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 30/32] btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit d61acbbf54c612ea9bf67eed609494cda0857b3a ]

[BUG]
There are some reports about btrfs wait forever to unmount itself, with
the following call trace:

  INFO: task umount:4631 blocked for more than 491 seconds.
        Tainted: G               X  5.3.8-2-default #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  umount          D    0  4631   3337 0x00000000
  Call Trace:
  ([<00000000174adf7a>] __schedule+0x342/0x748)
   [<00000000174ae3ca>] schedule+0x4a/0xd8
   [<00000000174b1f08>] schedule_timeout+0x218/0x420
   [<00000000174af10c>] wait_for_common+0x104/0x1d8
   [<000003ff804d6994>] btrfs_qgroup_wait_for_completion+0x84/0xb0 [btrfs]
   [<000003ff8044a616>] close_ctree+0x4e/0x380 [btrfs]
   [<0000000016fa3136>] generic_shutdown_super+0x8e/0x158
   [<0000000016fa34d6>] kill_anon_super+0x26/0x40
   [<000003ff8041ba88>] btrfs_kill_super+0x28/0xc8 [btrfs]
   [<0000000016fa39f8>] deactivate_locked_super+0x68/0x98
   [<0000000016fcb198>] cleanup_mnt+0xc0/0x140
   [<0000000016d6a846>] task_work_run+0xc6/0x110
   [<0000000016d04f76>] do_notify_resume+0xae/0xb8
   [<00000000174b30ae>] system_call+0xe2/0x2c8

[CAUSE]
The problem happens when we have called qgroup_rescan_init(), but
not queued the worker. It can be caused mostly by error handling.

	Qgroup ioctl thread		|	Unmount thread
----------------------------------------+-----------------------------------
					|
btrfs_qgroup_rescan()			|
|- qgroup_rescan_init()			|
|  |- qgroup_rescan_running = true;	|
|					|
|- trans = btrfs_join_transaction()	|
|  Some error happened			|
|					|
|- btrfs_qgroup_rescan() returns error	|
   But qgroup_rescan_running == true;	|
					| close_ctree()
					| |- btrfs_qgroup_wait_for_completion()
					|    |- running == true;
					|    |- wait_for_completion();

btrfs_qgroup_rescan_worker is never queued, thus no one is going to wake
up close_ctree() and we get a deadlock.

All involved qgroup_rescan_init() callers are:

- btrfs_qgroup_rescan()
  The example above. It's possible to trigger the deadlock when error
  happened.

- btrfs_quota_enable()
  Not possible. Just after qgroup_rescan_init() we queue the work.

- btrfs_read_qgroup_config()
  It's possible to trigger the deadlock. It only init the work, the
  work queueing happens in btrfs_qgroup_rescan_resume().
  Thus if error happened in between, deadlock is possible.

We shouldn't set fs_info->qgroup_rescan_running just in
qgroup_rescan_init(), as at that stage we haven't yet queued qgroup
rescan worker to run.

[FIX]
Set qgroup_rescan_running before queueing the work, so that we ensure
the rescan work is queued when we wait for it.

Fixes: 8d9eddad1946 ("Btrfs: fix qgroup rescan worker initialization")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Change subject and cause analyse, use a smaller fix ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 0cd043f03081e..cbd40826f5dcf 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1032,6 +1032,7 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info)
 	ret = qgroup_rescan_init(fs_info, 0, 1);
 	if (!ret) {
 	        qgroup_rescan_zero_tracking(fs_info);
+		fs_info->qgroup_rescan_running = true;
 	        btrfs_queue_work(fs_info->qgroup_rescan_workers,
 	                         &fs_info->qgroup_rescan_work);
 	}
@@ -2906,7 +2907,6 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid,
 		sizeof(fs_info->qgroup_rescan_progress));
 	fs_info->qgroup_rescan_progress.objectid = progress_objectid;
 	init_completion(&fs_info->qgroup_rescan_completion);
-	fs_info->qgroup_rescan_running = true;
 
 	spin_unlock(&fs_info->qgroup_lock);
 	mutex_unlock(&fs_info->qgroup_rescan_lock);
@@ -2972,8 +2972,11 @@ btrfs_qgroup_rescan(struct btrfs_fs_info *fs_info)
 
 	qgroup_rescan_zero_tracking(fs_info);
 
+	mutex_lock(&fs_info->qgroup_rescan_lock);
+	fs_info->qgroup_rescan_running = true;
 	btrfs_queue_work(fs_info->qgroup_rescan_workers,
 			 &fs_info->qgroup_rescan_work);
+	mutex_unlock(&fs_info->qgroup_rescan_lock);
 
 	return 0;
 }
@@ -3009,9 +3012,13 @@ int btrfs_qgroup_wait_for_completion(struct btrfs_fs_info *fs_info,
 void
 btrfs_qgroup_rescan_resume(struct btrfs_fs_info *fs_info)
 {
-	if (fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN)
+	if (fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN) {
+		mutex_lock(&fs_info->qgroup_rescan_lock);
+		fs_info->qgroup_rescan_running = true;
 		btrfs_queue_work(fs_info->qgroup_rescan_workers,
 				 &fs_info->qgroup_rescan_work);
+		mutex_unlock(&fs_info->qgroup_rescan_lock);
+	}
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 31/32] btrfs: remove a BUG_ON() from merge_reloc_roots()

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 7b7b74315b24dc064bc1c683659061c3d48f8668 ]

This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().

At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.

However this only happens if we successfully start a transaction.  If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.

This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point.  The reloc
control will be free'd and the rb tree is no longer used.

There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.

IMO this is the cleaner solution.  I started with handling the error in
prepare_to_merge(), but it turned out super ugly.  And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case.  So I've opted to just remove it and add a comment where it was.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 377cf3785fbbd..a4be9bf36e193 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -2434,7 +2434,21 @@ void merge_reloc_roots(struct reloc_control *rc)
 			free_reloc_roots(&reloc_roots);
 	}
 
-	BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	/*
+	 * We used to have
+	 *
+	 * BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	 *
+	 * here, but it's wrong.  If we fail to start the transaction in
+	 * prepare_to_merge() we will have only 0 ref reloc roots, none of which
+	 * have actually been removed from the reloc_root_tree rb tree.  This is
+	 * fine because we're bailing here, and we hold a reference on the root
+	 * for the list that holds it, so these roots will be cleaned up when we
+	 * do the reloc_dirty_list afterwards.  Meanwhile the root->reloc_root
+	 * will be cleaned up on unmount.
+	 *
+	 * The remaining nodes will be cleaned up by free_reloc_control.
+	 */
 }
 
 static void free_block_list(struct rb_root *blocks)
-- 
2.20.1

[PATCH AUTOSEL 4.19 32/32] btrfs: track reloc roots based on their commit root bytenr

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit ea287ab157c2816bf12aad4cece41372f9d146b4 ]

We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.

This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree

  if (key.objectid == key.offset) {
	  /*
	   * Only root blocks of reloc trees use backref
	   * pointing to itself.
	   */
	  root = find_reloc_root(rc, cur->bytenr);
	  ASSERT(root);
	  cur->root = root;
	  break;
  }

find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).

Fix this by using the commit_root->start bytenr for indexing the commit
root.  Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.

This fixes the panic I was seeing when we started throttling relocation
for delayed refs.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index a4be9bf36e193..0d86dc6cc2bd2 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1253,7 +1253,7 @@ static int __must_check __add_reloc_root(struct btrfs_root *root)
 	if (!node)
 		return -ENOMEM;
 
-	node->bytenr = root->node->start;
+	node->bytenr = root->commit_root->start;
 	node->data = root;
 
 	spin_lock(&rc->reloc_root_tree.lock);
@@ -1284,10 +1284,11 @@ static void __del_reloc_root(struct btrfs_root *root)
 	if (rc && root->node) {
 		spin_lock(&rc->reloc_root_tree.lock);
 		rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-				      root->node->start);
+				      root->commit_root->start);
 		if (rb_node) {
 			node = rb_entry(rb_node, struct mapping_node, rb_node);
 			rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
+			RB_CLEAR_NODE(&node->rb_node);
 		}
 		spin_unlock(&rc->reloc_root_tree.lock);
 		if (!node)
@@ -1305,7 +1306,7 @@ static void __del_reloc_root(struct btrfs_root *root)
  * helper to update the 'address of tree root -> reloc tree'
  * mapping
  */
-static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
+static int __update_reloc_root(struct btrfs_root *root)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct rb_node *rb_node;
@@ -1314,7 +1315,7 @@ static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
 
 	spin_lock(&rc->reloc_root_tree.lock);
 	rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-			      root->node->start);
+			      root->commit_root->start);
 	if (rb_node) {
 		node = rb_entry(rb_node, struct mapping_node, rb_node);
 		rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
@@ -1326,7 +1327,7 @@ static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
 	BUG_ON((struct btrfs_root *)node->data != root);
 
 	spin_lock(&rc->reloc_root_tree.lock);
-	node->bytenr = new_bytenr;
+	node->bytenr = root->node->start;
 	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
 			      node->bytenr, &node->rb_node);
 	spin_unlock(&rc->reloc_root_tree.lock);
@@ -1471,6 +1472,7 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
 	}
 
 	if (reloc_root->commit_root != reloc_root->node) {
+		__update_reloc_root(reloc_root);
 		btrfs_set_root_node(root_item, reloc_root->node);
 		free_extent_buffer(reloc_root->commit_root);
 		reloc_root->commit_root = btrfs_root_node(reloc_root);
@@ -4614,11 +4616,6 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
 	BUG_ON(rc->stage == UPDATE_DATA_PTRS &&
 	       root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID);
 
-	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
-		if (buf == root->node)
-			__update_reloc_root(root, cow->start);
-	}
-
 	level = btrfs_header_level(buf);
 	if (btrfs_header_generation(buf) <=
 	    btrfs_root_last_snapshot(&root->root_item))
-- 
2.20.1