[PATCH v3 0/4] remoteproc: Refactor function rproc_alloc()

[PATCH v3 0/4] remoteproc: Refactor function rproc_alloc()

[Mathieu Poirier]

These are the remaining patches from the second version [1] that have
not been applied yet.

Applies cleanly on rproc-next (3898fc99d199)

Thanks,
Mathieu

New for V3:
- Freeing firmware name allocation with kfree_const() in patch 1.
- Get the comment out of the conditional block in patch 2. 
- A cleaner implementation of function rproc_alloc_ops() in patch 3.

New for V2:
- Reworked title for patch 01.
- Added "Fixes" tag to patch 01.
- Using kasprintf() instead of complex memory allocation.
- Using kstrdup_const() instead of kstrdup(). 
- Reworked rproc_alloc_firmware() to use non-negative form. 

[1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=271809

Mathieu Poirier (4):
  remoteproc: Use kstrdup_const() rather than kstrdup()
  remoteproc: Restructure firmware name allocation
  remoteproc: Split rproc_ops allocation from rproc_alloc()
  remoteproc: Get rid of tedious error path

 drivers/remoteproc/remoteproc_core.c | 70 +++++++++++++++-------------
 include/linux/remoteproc.h           |  2 +-
 2 files changed, 39 insertions(+), 33 deletions(-)

-- 
2.20.1

[PATCH v3 1/4] remoteproc: Use kstrdup_const() rather than kstrdup()

[Mathieu Poirier]

For cases where @firmware is declared "const char *", use function
kstrdup_const() to avoid needlessly creating another copy on the
heap.

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 8 ++++----
 include/linux/remoteproc.h           | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index d9e6949e4ac1..db8a15fc1e4a 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1996,7 +1996,7 @@ static void rproc_type_release(struct device *dev)
 	if (rproc->index >= 0)
 		ida_simple_remove(&rproc_dev_index, rproc->index);
 
-	kfree(rproc->firmware);
+	kfree_const(rproc->firmware);
 	kfree(rproc->ops);
 	kfree(rproc);
 }
@@ -2009,7 +2009,7 @@ static const struct device_type rproc_type = {
 static int rproc_alloc_firmware(struct rproc *rproc,
 				const char *name, const char *firmware)
 {
-	char *p;
+	const char *p;
 
 	if (!firmware)
 		/*
@@ -2018,7 +2018,7 @@ static int rproc_alloc_firmware(struct rproc *rproc,
 		 */
 		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
 	else
-		p = kstrdup(firmware, GFP_KERNEL);
+		p = kstrdup_const(firmware, GFP_KERNEL);
 
 	if (!p)
 		return -ENOMEM;
@@ -2122,7 +2122,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	return rproc;
 
 free_firmware:
-	kfree(rproc->firmware);
+	kfree_const(rproc->firmware);
 free_rproc:
 	kfree(rproc);
 	return NULL;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 0547676479d3..800b4f09dc98 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -489,7 +489,7 @@ struct rproc {
 	struct list_head node;
 	struct iommu_domain *domain;
 	const char *name;
-	char *firmware;
+	const char *firmware;
 	void *priv;
 	struct rproc_ops *ops;
 	struct device dev;
-- 
2.20.1

Re: [PATCH v3 1/4] remoteproc: Use kstrdup_const() rather than kstrdup()

[Bjorn Andersson]

On Mon 20 Apr 16:15 PDT 2020, Mathieu Poirier wrote:

> For cases where @firmware is declared "const char *", use function
> kstrdup_const() to avoid needlessly creating another copy on the
> heap.
> 
> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Alex Elder <elder@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/remoteproc/remoteproc_core.c | 8 ++++----
>  include/linux/remoteproc.h           | 2 +-
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index d9e6949e4ac1..db8a15fc1e4a 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -1996,7 +1996,7 @@ static void rproc_type_release(struct device *dev)
>  	if (rproc->index >= 0)
>  		ida_simple_remove(&rproc_dev_index, rproc->index);
>  
> -	kfree(rproc->firmware);
> +	kfree_const(rproc->firmware);
>  	kfree(rproc->ops);
>  	kfree(rproc);
>  }
> @@ -2009,7 +2009,7 @@ static const struct device_type rproc_type = {
>  static int rproc_alloc_firmware(struct rproc *rproc,
>  				const char *name, const char *firmware)
>  {
> -	char *p;
> +	const char *p;
>  
>  	if (!firmware)
>  		/*
> @@ -2018,7 +2018,7 @@ static int rproc_alloc_firmware(struct rproc *rproc,
>  		 */
>  		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
>  	else
> -		p = kstrdup(firmware, GFP_KERNEL);
> +		p = kstrdup_const(firmware, GFP_KERNEL);
>  
>  	if (!p)
>  		return -ENOMEM;
> @@ -2122,7 +2122,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  	return rproc;
>  
>  free_firmware:
> -	kfree(rproc->firmware);
> +	kfree_const(rproc->firmware);
>  free_rproc:
>  	kfree(rproc);
>  	return NULL;
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 0547676479d3..800b4f09dc98 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -489,7 +489,7 @@ struct rproc {
>  	struct list_head node;
>  	struct iommu_domain *domain;
>  	const char *name;
> -	char *firmware;
> +	const char *firmware;
>  	void *priv;
>  	struct rproc_ops *ops;
>  	struct device dev;
> -- 
> 2.20.1
> 

[PATCH v3 2/4] remoteproc: Restructure firmware name allocation

[Mathieu Poirier]

Improve the readability of function rproc_alloc_firmware() by using
a non-negated condition and moving the comment out of the conditional
block

Suggested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index db8a15fc1e4a..45529d40342f 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -2011,14 +2011,14 @@ static int rproc_alloc_firmware(struct rproc *rproc,
 {
 	const char *p;
 
-	if (!firmware)
-		/*
-		 * If the caller didn't pass in a firmware name then
-		 * construct a default name.
-		 */
-		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
-	else
+	/*
+	 * Allocate a firmware name if the caller gave us one to work
+	 * with.  Otherwise construct a new one using a default pattern.
+	 */
+	if (firmware)
 		p = kstrdup_const(firmware, GFP_KERNEL);
+	else
+		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
 
 	if (!p)
 		return -ENOMEM;
-- 
2.20.1

Re: [PATCH v3 2/4] remoteproc: Restructure firmware name allocation

[Bjorn Andersson]

On Mon 20 Apr 16:15 PDT 2020, Mathieu Poirier wrote:

> Improve the readability of function rproc_alloc_firmware() by using
> a non-negated condition and moving the comment out of the conditional
> block
> 
> Suggested-by: Alex Elder <elder@linaro.org>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Alex Elder <elder@linaro.org>

Looks better, thanks for respinning.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/remoteproc/remoteproc_core.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index db8a15fc1e4a..45529d40342f 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -2011,14 +2011,14 @@ static int rproc_alloc_firmware(struct rproc *rproc,
>  {
>  	const char *p;
>  
> -	if (!firmware)
> -		/*
> -		 * If the caller didn't pass in a firmware name then
> -		 * construct a default name.
> -		 */
> -		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
> -	else
> +	/*
> +	 * Allocate a firmware name if the caller gave us one to work
> +	 * with.  Otherwise construct a new one using a default pattern.
> +	 */
> +	if (firmware)
>  		p = kstrdup_const(firmware, GFP_KERNEL);
> +	else
> +		p = kasprintf(GFP_KERNEL, "rproc-%s-fw", name);
>  
>  	if (!p)
>  		return -ENOMEM;
> -- 
> 2.20.1
> 

[PATCH v3 3/4] remoteproc: Split rproc_ops allocation from rproc_alloc()

[Mathieu Poirier]

Make the rproc_ops allocation a function on its own in an effort
to clean up function rproc_alloc().

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 33 ++++++++++++++++++----------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 45529d40342f..15318507aedb 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -2028,6 +2028,26 @@ static int rproc_alloc_firmware(struct rproc *rproc,
 	return 0;
 }
 
+static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
+{
+	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
+	if (!rproc->ops)
+		return -ENOMEM;
+
+	if (rproc->ops->load)
+		return 0;
+
+	/* Default to ELF loader if no load function is specified */
+	rproc->ops->load = rproc_elf_load_segments;
+	rproc->ops->parse_fw = rproc_elf_load_rsc_table;
+	rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
+	if (!rproc->ops->sanity_check)
+		rproc->ops->sanity_check = rproc_elf32_sanity_check;
+	rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
+
+	return 0;
+}
+
 /**
  * rproc_alloc() - allocate a remote processor handle
  * @dev: the underlying device
@@ -2067,8 +2087,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	if (rproc_alloc_firmware(rproc, name, firmware))
 		goto free_rproc;
 
-	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
-	if (!rproc->ops)
+	if (rproc_alloc_ops(rproc, ops))
 		goto free_firmware;
 
 	rproc->name = name;
@@ -2096,16 +2115,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 
 	atomic_set(&rproc->power, 0);
 
-	/* Default to ELF loader if no load function is specified */
-	if (!rproc->ops->load) {
-		rproc->ops->load = rproc_elf_load_segments;
-		rproc->ops->parse_fw = rproc_elf_load_rsc_table;
-		rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
-		if (!rproc->ops->sanity_check)
-			rproc->ops->sanity_check = rproc_elf32_sanity_check;
-		rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
-	}
-
 	mutex_init(&rproc->lock);
 
 	INIT_LIST_HEAD(&rproc->carveouts);
-- 
2.20.1

Re: [PATCH v3 3/4] remoteproc: Split rproc_ops allocation from rproc_alloc()

[Bjorn Andersson]

On Mon 20 Apr 16:16 PDT 2020, Mathieu Poirier wrote:

> Make the rproc_ops allocation a function on its own in an effort
> to clean up function rproc_alloc().
> 
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Alex Elder <elder@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/remoteproc/remoteproc_core.c | 33 ++++++++++++++++++----------
>  1 file changed, 21 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 45529d40342f..15318507aedb 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -2028,6 +2028,26 @@ static int rproc_alloc_firmware(struct rproc *rproc,
>  	return 0;
>  }
>  
> +static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
> +{
> +	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
> +	if (!rproc->ops)
> +		return -ENOMEM;
> +
> +	if (rproc->ops->load)
> +		return 0;
> +
> +	/* Default to ELF loader if no load function is specified */
> +	rproc->ops->load = rproc_elf_load_segments;
> +	rproc->ops->parse_fw = rproc_elf_load_rsc_table;
> +	rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
> +	if (!rproc->ops->sanity_check)
> +		rproc->ops->sanity_check = rproc_elf32_sanity_check;
> +	rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
> +
> +	return 0;
> +}
> +
>  /**
>   * rproc_alloc() - allocate a remote processor handle
>   * @dev: the underlying device
> @@ -2067,8 +2087,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  	if (rproc_alloc_firmware(rproc, name, firmware))
>  		goto free_rproc;
>  
> -	rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL);
> -	if (!rproc->ops)
> +	if (rproc_alloc_ops(rproc, ops))
>  		goto free_firmware;
>  
>  	rproc->name = name;
> @@ -2096,16 +2115,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  
>  	atomic_set(&rproc->power, 0);
>  
> -	/* Default to ELF loader if no load function is specified */
> -	if (!rproc->ops->load) {
> -		rproc->ops->load = rproc_elf_load_segments;
> -		rproc->ops->parse_fw = rproc_elf_load_rsc_table;
> -		rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
> -		if (!rproc->ops->sanity_check)
> -			rproc->ops->sanity_check = rproc_elf32_sanity_check;
> -		rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
> -	}
> -
>  	mutex_init(&rproc->lock);
>  
>  	INIT_LIST_HEAD(&rproc->carveouts);
> -- 
> 2.20.1
> 

[PATCH v3 4/4] remoteproc: Get rid of tedious error path

[Mathieu Poirier]

Get rid of tedious error management by moving firmware and operation
allocation after calling device_initialize().  That way we take advantage
of the automatic call to rproc_type_release() to cleanup after ourselves
when put_device() is called.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Suman Anna <s-anna@ti.com>
---
 drivers/remoteproc/remoteproc_core.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 15318507aedb..6fca4e2c0dd7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -2084,12 +2084,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	if (!rproc)
 		return NULL;
 
-	if (rproc_alloc_firmware(rproc, name, firmware))
-		goto free_rproc;
-
-	if (rproc_alloc_ops(rproc, ops))
-		goto free_firmware;
-
 	rproc->name = name;
 	rproc->priv = &rproc[1];
 	rproc->auto_boot = true;
@@ -2103,12 +2097,17 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 	rproc->dev.driver_data = rproc;
 	idr_init(&rproc->notifyids);
 
+	if (rproc_alloc_firmware(rproc, name, firmware))
+		goto put_device;
+
+	if (rproc_alloc_ops(rproc, ops))
+		goto put_device;
+
 	/* Assign a unique device index and name */
 	rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
 	if (rproc->index < 0) {
 		dev_err(dev, "ida_simple_get failed: %d\n", rproc->index);
-		put_device(&rproc->dev);
-		return NULL;
+		goto put_device;
 	}
 
 	dev_set_name(&rproc->dev, "remoteproc%d", rproc->index);
@@ -2130,10 +2129,8 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
 
 	return rproc;
 
-free_firmware:
-	kfree_const(rproc->firmware);
-free_rproc:
-	kfree(rproc);
+put_device:
+	put_device(&rproc->dev);
 	return NULL;
 }
 EXPORT_SYMBOL(rproc_alloc);
-- 
2.20.1

Re: [PATCH v3 4/4] remoteproc: Get rid of tedious error path

[Bjorn Andersson]

On Mon 20 Apr 16:16 PDT 2020, Mathieu Poirier wrote:

> Get rid of tedious error management by moving firmware and operation
> allocation after calling device_initialize().  That way we take advantage
> of the automatic call to rproc_type_release() to cleanup after ourselves
> when put_device() is called.
> 
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Alex Elder <elder@linaro.org>
> Acked-by: Suman Anna <s-anna@ti.com>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/remoteproc/remoteproc_core.c | 21 +++++++++------------
>  1 file changed, 9 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 15318507aedb..6fca4e2c0dd7 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -2084,12 +2084,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  	if (!rproc)
>  		return NULL;
>  
> -	if (rproc_alloc_firmware(rproc, name, firmware))
> -		goto free_rproc;
> -
> -	if (rproc_alloc_ops(rproc, ops))
> -		goto free_firmware;
> -
>  	rproc->name = name;
>  	rproc->priv = &rproc[1];
>  	rproc->auto_boot = true;
> @@ -2103,12 +2097,17 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  	rproc->dev.driver_data = rproc;
>  	idr_init(&rproc->notifyids);
>  
> +	if (rproc_alloc_firmware(rproc, name, firmware))
> +		goto put_device;
> +
> +	if (rproc_alloc_ops(rproc, ops))
> +		goto put_device;
> +
>  	/* Assign a unique device index and name */
>  	rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
>  	if (rproc->index < 0) {
>  		dev_err(dev, "ida_simple_get failed: %d\n", rproc->index);
> -		put_device(&rproc->dev);
> -		return NULL;
> +		goto put_device;
>  	}
>  
>  	dev_set_name(&rproc->dev, "remoteproc%d", rproc->index);
> @@ -2130,10 +2129,8 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  
>  	return rproc;
>  
> -free_firmware:
> -	kfree_const(rproc->firmware);
> -free_rproc:
> -	kfree(rproc);
> +put_device:
> +	put_device(&rproc->dev);
>  	return NULL;
>  }
>  EXPORT_SYMBOL(rproc_alloc);
> -- 
> 2.20.1
>