[PATCH 4.14 00/26] 4.14.179-rc1 review

[PATCH 4.14 00/26] 4.14.179-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.179 release.
There are 26 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 06 May 2020 16:52:55 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.179-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.179-rc1

Paul Moore <paul@paul-moore.com>
    selinux: properly handle multiple messages in selinux_netlink_send()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: dmatest: Fix iteration non-stop logic

Andreas Gruenbacher <agruenba@redhat.com>
    nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl

Arnd Bergmann <arnd@arndb.de>
    ALSA: opti9xx: shut up gcc-10 range warning

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system

David Disseldorp <ddiss@suse.de>
    scsi: target/iblock: fix WRITE SAME zeroing

Tang Bin <tangbin@cmss.chinamobile.com>
    iommu/qcom: Fix local_base status check

Sean Christopherson <sean.j.christopherson@intel.com>
    vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()

Yan Zhao <yan.y.zhao@intel.com>
    vfio: avoid possible overflow in vfio_iommu_type1_pin_pages

Alaa Hleihel <alaa@mellanox.com>
    RDMA/mlx4: Initialize ib_spec on the stack

Aharon Landau <aharonl@mellanox.com>
    RDMA/mlx5: Set GRH fields in query QP on RoCE

Sunwook Eom <speed.eom@samsung.com>
    dm verity fec: fix hash block number in verity_fec_decode

Dexuan Cui <decui@microsoft.com>
    PM: hibernate: Freeze kernel threads in software_resume()

Kai-Heng Feng <kai.heng.feng@canonical.com>
    PM: ACPI: Output correct message on target power state

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: oss: Place the plugin buffer overflow checks correctly

Wu Bo <wubo40@huawei.com>
    ALSA: hda/hdmi: fix without unlocked before return

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter

Adrian Hunter <adrian.hunter@intel.com>
    mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers

Marek Behún <marek.behun@nic.cz>
    mmc: sdhci-xenon: fix annoying 1.8V regulator warning

Filipe Manana <fdmanana@suse.com>
    btrfs: fix partial loss of prealloc extent past i_size after fsync

Xiyu Yang <xiyuyang19@fudan.edu.cn>
    btrfs: fix block group leak when removing fails

Vasily Averin <vvs@virtuozzo.com>
    drm/qxl: qxl_release use after free

Vasily Averin <vvs@virtuozzo.com>
    drm/qxl: qxl_release leak in qxl_hw_surface_alloc()

Vasily Averin <vvs@virtuozzo.com>
    drm/qxl: qxl_release leak in qxl_draw_dirty_fb()

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/edid: Fix off-by-one in DispID DTD pixel clock

Theodore Ts'o <tytso@mit.edu>
    ext4: fix special inode number checks in __ext4_iget()


-------------

Diffstat:

 Makefile                            |  4 +--
 drivers/acpi/device_pm.c            |  4 +--
 drivers/dma/dmatest.c               |  4 +--
 drivers/gpu/drm/drm_edid.c          |  2 +-
 drivers/gpu/drm/qxl/qxl_cmd.c       | 10 +++---
 drivers/gpu/drm/qxl/qxl_display.c   |  6 ++--
 drivers/gpu/drm/qxl/qxl_draw.c      | 13 +++----
 drivers/gpu/drm/qxl/qxl_ioctl.c     |  5 +--
 drivers/infiniband/hw/mlx4/main.c   |  3 +-
 drivers/infiniband/hw/mlx5/qp.c     |  4 ++-
 drivers/iommu/amd_iommu_init.c      |  2 +-
 drivers/iommu/qcom_iommu.c          |  5 ++-
 drivers/md/dm-verity-fec.c          |  2 +-
 drivers/mmc/host/sdhci-pci-core.c   |  3 ++
 drivers/mmc/host/sdhci-xenon.c      | 10 ++++++
 drivers/target/target_core_iblock.c |  2 +-
 drivers/vfio/vfio_iommu_type1.c     |  6 ++--
 fs/btrfs/extent-tree.c              | 16 +++++----
 fs/btrfs/tree-log.c                 | 43 +++++++++++++++++++++--
 fs/ext4/inode.c                     |  2 +-
 fs/nfs/nfs3acl.c                    | 22 ++++++++----
 kernel/power/hibernate.c            |  7 ++++
 security/selinux/hooks.c            | 68 ++++++++++++++++++++++++-------------
 sound/core/oss/pcm_plugin.c         | 20 ++++++-----
 sound/isa/opti9xx/miro.c            |  9 +++--
 sound/isa/opti9xx/opti92x-ad1848.c  |  9 +++--
 sound/pci/hda/patch_hdmi.c          |  4 ++-
 sound/pci/hda/patch_realtek.c       |  1 +
 28 files changed, 196 insertions(+), 90 deletions(-)

[PATCH 4.14 01/26] ext4: fix special inode number checks in __ext4_iget()

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 191ce17876c9367819c4b0a25b503c0f6d9054d8 upstream.

The check for special (reserved) inode number checks in __ext4_iget()
was broken by commit 8a363970d1dc: ("ext4: avoid declaring fs
inconsistent due to invalid file handles").  This was caused by a
botched reversal of the sense of the flag now known as
EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL).
Fix the logic appropriately.

Fixes: 8a363970d1dc ("ext4: avoid declaring fs inconsistent...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4715,7 +4715,7 @@ struct inode *__ext4_iget(struct super_b
 	gid_t i_gid;
 	projid_t i_projid;
 
-	if (((flags & EXT4_IGET_NORMAL) &&
+	if ((!(flags & EXT4_IGET_SPECIAL) &&
 	     (ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO)) ||
 	    (ino < EXT4_ROOT_INO) ||
 	    (ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count))) {

[PATCH 4.14 02/26] drm/edid: Fix off-by-one in DispID DTD pixel clock

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 6292b8efe32e6be408af364132f09572aed14382 upstream.

The DispID DTD pixel clock is documented as:
"00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec"
Which seems to imply that we to add one to the raw value.

Reality seems to agree as there are tiled displays in the wild
which currently show a 10kHz difference in the pixel clock
between the tiles (one tile gets its mode from the base EDID,
the other from the DispID block).

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_edid.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4502,7 +4502,7 @@ static struct drm_display_mode *drm_mode
 	struct drm_display_mode *mode;
 	unsigned pixel_clock = (timings->pixel_clock[0] |
 				(timings->pixel_clock[1] << 8) |
-				(timings->pixel_clock[2] << 16));
+				(timings->pixel_clock[2] << 16)) + 1;
 	unsigned hactive = (timings->hactive[0] | timings->hactive[1] << 8) + 1;
 	unsigned hblank = (timings->hblank[0] | timings->hblank[1] << 8) + 1;
 	unsigned hsync = (timings->hsync[0] | (timings->hsync[1] & 0x7f) << 8) + 1;

[PATCH 4.14 03/26] drm/qxl: qxl_release leak in qxl_draw_dirty_fb()

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 85e9b88af1e6164f19ec71381efd5e2bcfc17620 upstream.

ret should be changed to release allocated struct qxl_release

Cc: stable@vger.kernel.org
Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/22cfd55f-07c8-95d0-a2f7-191b7153c3d4@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/qxl/qxl_draw.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/qxl/qxl_draw.c
+++ b/drivers/gpu/drm/qxl/qxl_draw.c
@@ -348,9 +348,10 @@ void qxl_draw_dirty_fb(struct qxl_device
 		goto out_release_backoff;
 
 	rects = drawable_set_clipping(qdev, num_clips, clips_bo);
-	if (!rects)
+	if (!rects) {
+		ret = -EINVAL;
 		goto out_release_backoff;
-
+	}
 	drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
 
 	drawable->clip.type = SPICE_CLIP_TYPE_RECTS;

[PATCH 4.14 04/26] drm/qxl: qxl_release leak in qxl_hw_surface_alloc()

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit a65aa9c3676ffccb21361d52fcfedd5b5ff387d7 upstream.

Cc: stable@vger.kernel.org
Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2e5a13ae-9ab2-5401-aa4d-03d5f5593423@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/qxl/qxl_cmd.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -504,9 +504,10 @@ int qxl_hw_surface_alloc(struct qxl_devi
 		return ret;
 
 	ret = qxl_release_reserve_list(release, true);
-	if (ret)
+	if (ret) {
+		qxl_release_free(qdev, release);
 		return ret;
-
+	}
 	cmd = (struct qxl_surface_cmd *)qxl_release_map(qdev, release);
 	cmd->type = QXL_SURFACE_CMD_CREATE;
 	cmd->flags = QXL_SURF_FLAG_KEEP_DATA;

[PATCH 4.14 05/26] drm/qxl: qxl_release use after free

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 933db73351d359f74b14f4af095808260aff11f9 upstream.

qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.

It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object

Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.

cc: stable@vger.kernel.org
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[backported to v4.14-stable]
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/qxl/qxl_cmd.c     |    5 ++---
 drivers/gpu/drm/qxl/qxl_display.c |    6 +++---
 drivers/gpu/drm/qxl/qxl_draw.c    |    8 ++++----
 drivers/gpu/drm/qxl/qxl_ioctl.c   |    5 +----
 4 files changed, 10 insertions(+), 14 deletions(-)

--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -533,8 +533,8 @@ int qxl_hw_surface_alloc(struct qxl_devi
 	/* no need to add a release to the fence for this surface bo,
 	   since it is only released when we ask to destroy the surface
 	   and it would never signal otherwise */
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 
 	surf->hw_surf_alloc = true;
 	spin_lock(&qdev->surf_id_idr_lock);
@@ -576,9 +576,8 @@ int qxl_hw_surface_dealloc(struct qxl_de
 	cmd->surface_id = id;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
-
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_SURFACE, false);
 
 	return 0;
 }
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -533,8 +533,8 @@ static int qxl_primary_apply_cursor(stru
 	cmd->u.set.visible = 1;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 
 	return ret;
 
@@ -701,8 +701,8 @@ static void qxl_cursor_atomic_update(str
 	cmd->u.position.y = plane->state->crtc_y + fb->hot_y;
 
 	qxl_release_unmap(qdev, release, &cmd->release_info);
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 
 	if (old_cursor_bo)
 		qxl_bo_unref(&old_cursor_bo);
@@ -747,8 +747,8 @@ static void qxl_cursor_atomic_disable(st
 	cmd->type = QXL_CURSOR_HIDE;
 	qxl_release_unmap(qdev, release, &cmd->release_info);
 
-	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
 }
 
 static int qxl_plane_prepare_fb(struct drm_plane *plane,
--- a/drivers/gpu/drm/qxl/qxl_draw.c
+++ b/drivers/gpu/drm/qxl/qxl_draw.c
@@ -241,8 +241,8 @@ void qxl_draw_opaque_fb(const struct qxl
 		qxl_bo_physical_address(qdev, dimage->bo, 0);
 	qxl_release_unmap(qdev, release, &drawable->release_info);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 
 out_free_palette:
 	if (palette_bo)
@@ -382,8 +382,8 @@ void qxl_draw_dirty_fb(struct qxl_device
 	}
 	qxl_bo_kunmap(clips_bo);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 
 out_release_backoff:
 	if (ret)
@@ -433,8 +433,8 @@ void qxl_draw_copyarea(struct qxl_device
 	drawable->u.copy_bits.src_pos.y = sy;
 	qxl_release_unmap(qdev, release, &drawable->release_info);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 
 out_free_release:
 	if (ret)
@@ -477,8 +477,8 @@ void qxl_draw_fill(struct qxl_draw_fill
 
 	qxl_release_unmap(qdev, release, &drawable->release_info);
 
-	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 	qxl_release_fence_buffer_objects(release);
+	qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
 
 out_free_release:
 	if (ret)
--- a/drivers/gpu/drm/qxl/qxl_ioctl.c
+++ b/drivers/gpu/drm/qxl/qxl_ioctl.c
@@ -257,11 +257,8 @@ static int qxl_process_single_command(st
 			apply_surf_reloc(qdev, &reloc_info[i]);
 	}
 
+	qxl_release_fence_buffer_objects(release);
 	ret = qxl_push_command_ring_release(qdev, release, cmd->type, true);
-	if (ret)
-		qxl_release_backoff_reserve_list(release);
-	else
-		qxl_release_fence_buffer_objects(release);
 
 out_free_bos:
 out_free_release:

[PATCH 4.14 06/26] btrfs: fix block group leak when removing fails

[Greg Kroah-Hartman]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

commit f6033c5e333238f299c3ae03fac8cc1365b23b77 upstream.

btrfs_remove_block_group() invokes btrfs_lookup_block_group(), which
returns a local reference of the block group that contains the given
bytenr to "block_group" with increased refcount.

When btrfs_remove_block_group() returns, "block_group" becomes invalid,
so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of btrfs_remove_block_group(). When those error scenarios occur such as
btrfs_alloc_path() returns NULL, the function forgets to decrease its
refcnt increased by btrfs_lookup_block_group() and will cause a refcnt
leak.

Fix this issue by jumping to "out_put_group" label and calling
btrfs_put_block_group() when those error scenarios occur.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -10554,7 +10554,7 @@ int btrfs_remove_block_group(struct btrf
 	path = btrfs_alloc_path();
 	if (!path) {
 		ret = -ENOMEM;
-		goto out;
+		goto out_put_group;
 	}
 
 	/*
@@ -10591,7 +10591,7 @@ int btrfs_remove_block_group(struct btrf
 		ret = btrfs_orphan_add(trans, BTRFS_I(inode));
 		if (ret) {
 			btrfs_add_delayed_iput(inode);
-			goto out;
+			goto out_put_group;
 		}
 		clear_nlink(inode);
 		/* One for the block groups ref */
@@ -10614,13 +10614,13 @@ int btrfs_remove_block_group(struct btrf
 
 	ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
 	if (ret < 0)
-		goto out;
+		goto out_put_group;
 	if (ret > 0)
 		btrfs_release_path(path);
 	if (ret == 0) {
 		ret = btrfs_del_item(trans, tree_root, path);
 		if (ret)
-			goto out;
+			goto out_put_group;
 		btrfs_release_path(path);
 	}
 
@@ -10778,9 +10778,9 @@ int btrfs_remove_block_group(struct btrf
 
 	ret = remove_block_group_free_space(trans, fs_info, block_group);
 	if (ret)
-		goto out;
+		goto out_put_group;
 
-	btrfs_put_block_group(block_group);
+	/* Once for the block groups rbtree */
 	btrfs_put_block_group(block_group);
 
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
@@ -10790,6 +10790,10 @@ int btrfs_remove_block_group(struct btrf
 		goto out;
 
 	ret = btrfs_del_item(trans, root, path);
+
+out_put_group:
+	/* Once for the lookup reference */
+	btrfs_put_block_group(block_group);
 out:
 	btrfs_free_path(path);
 	return ret;

[PATCH 4.14 07/26] btrfs: fix partial loss of prealloc extent past i_size after fsync

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit f135cea30de5f74d5bfb5116682073841fb4af8f upstream.

When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.

Consider the following example with comments explaining how and why it
happens.

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our test file with 2 consecutive prealloc extents, each with a
  # size of 128Kb, and covering the range from 0 to 256Kb, with a file
  # size of 0.
  $ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
  $ xfs_io -c "falloc -k 128K 128K" /mnt/foo

  # Fsync the file to record both extents in the log tree.
  $ xfs_io -c "fsync" /mnt/foo

  # Now do a redudant extent allocation for the range from 0 to 64Kb.
  # This will merely increase the file size from 0 to 64Kb. Instead we
  # could also do a truncate to set the file size to 64Kb.
  $ xfs_io -c "falloc 0 64K" /mnt/foo

  # Fsync the file, so we update the inode item in the log tree with the
  # new file size (64Kb). This also ends up setting the number of bytes
  # for the first prealloc extent to 64Kb. This is done by the truncation
  # at btrfs_log_prealloc_extents().
  # This means that if a power failure happens after this, a write into
  # the file range 64Kb to 128Kb will not use the prealloc extent and
  # will result in allocation of a new extent.
  $ xfs_io -c "fsync" /mnt/foo

  # Now set the file size to 256K with a truncate and then fsync the file.
  # Since no changes happened to the extents, the fsync only updates the
  # i_size in the inode item at the log tree. This results in an implicit
  # hole for the file range from 64Kb to 128Kb, something which fsck will
  # complain when not using the NO_HOLES feature if we replay the log
  # after a power failure.
  $ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo

So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.

A test case for fstests follows soon.

Fixes: 31d11b83b96f ("Btrfs: fix duplicate extents after fsync of file with prealloc extents")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |   43 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4155,6 +4155,9 @@ static int btrfs_log_prealloc_extents(st
 	const u64 ino = btrfs_ino(inode);
 	struct btrfs_path *dst_path = NULL;
 	bool dropped_extents = false;
+	u64 truncate_offset = i_size;
+	struct extent_buffer *leaf;
+	int slot;
 	int ins_nr = 0;
 	int start_slot;
 	int ret;
@@ -4169,9 +4172,43 @@ static int btrfs_log_prealloc_extents(st
 	if (ret < 0)
 		goto out;
 
+	/*
+	 * We must check if there is a prealloc extent that starts before the
+	 * i_size and crosses the i_size boundary. This is to ensure later we
+	 * truncate down to the end of that extent and not to the i_size, as
+	 * otherwise we end up losing part of the prealloc extent after a log
+	 * replay and with an implicit hole if there is another prealloc extent
+	 * that starts at an offset beyond i_size.
+	 */
+	ret = btrfs_previous_item(root, path, ino, BTRFS_EXTENT_DATA_KEY);
+	if (ret < 0)
+		goto out;
+
+	if (ret == 0) {
+		struct btrfs_file_extent_item *ei;
+
+		leaf = path->nodes[0];
+		slot = path->slots[0];
+		ei = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
+
+		if (btrfs_file_extent_type(leaf, ei) ==
+		    BTRFS_FILE_EXTENT_PREALLOC) {
+			u64 extent_end;
+
+			btrfs_item_key_to_cpu(leaf, &key, slot);
+			extent_end = key.offset +
+				btrfs_file_extent_num_bytes(leaf, ei);
+
+			if (extent_end > i_size)
+				truncate_offset = extent_end;
+		}
+	} else {
+		ret = 0;
+	}
+
 	while (true) {
-		struct extent_buffer *leaf = path->nodes[0];
-		int slot = path->slots[0];
+		leaf = path->nodes[0];
+		slot = path->slots[0];
 
 		if (slot >= btrfs_header_nritems(leaf)) {
 			if (ins_nr > 0) {
@@ -4209,7 +4246,7 @@ static int btrfs_log_prealloc_extents(st
 				ret = btrfs_truncate_inode_items(trans,
 							 root->log_root,
 							 &inode->vfs_inode,
-							 i_size,
+							 truncate_offset,
 							 BTRFS_EXTENT_DATA_KEY);
 			} while (ret == -EAGAIN);
 			if (ret)

[PATCH 4.14 08/26] mmc: sdhci-xenon: fix annoying 1.8V regulator warning

[Greg Kroah-Hartman]

From: Marek Behún <marek.behun@nic.cz>

commit bb32e1987bc55ce1db400faf47d85891da3c9b9f upstream.

For some reason the Host Control2 register of the Xenon SDHCI controller
sometimes reports the bit representing 1.8V signaling as 0 when read
after it was written as 1. Subsequent read reports 1.

This causes the sdhci_start_signal_voltage_switch function to report
  1.8V regulator output did not become stable

When CONFIG_PM is enabled, the host is suspended and resumend many
times, and in each resume the switch to 1.8V is called, and so the
kernel log reports this message annoyingly often.

Do an empty read of the Host Control2 register in Xenon's
.voltage_switch method to circumvent this.

This patch fixes this particular problem on Turris MOX.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V...")
Cc: stable@vger.kernel.org # v4.16+
Link: https://lore.kernel.org/r/20200420080444.25242-1-marek.behun@nic.cz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-xenon.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -238,6 +238,16 @@ static void xenon_voltage_switch(struct
 {
 	/* Wait for 5ms after set 1.8V signal enable bit */
 	usleep_range(5000, 5500);
+
+	/*
+	 * For some reason the controller's Host Control2 register reports
+	 * the bit representing 1.8V signaling as 0 when read after it was
+	 * written as 1. Subsequent read reports 1.
+	 *
+	 * Since this may cause some issues, do an empty read of the Host
+	 * Control2 register here to circumvent this.
+	 */
+	sdhci_readw(host, SDHCI_HOST_CONTROL2);
 }
 
 static const struct sdhci_ops sdhci_xenon_ops = {

[PATCH 4.14 09/26] mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 1a8eb6b373c2af6533c13d1ea11f504e5010ed9a upstream.

BIOS writers have begun the practice of setting 40 ohm eMMC driver strength
even though the eMMC may not support it, on the assumption that the kernel
will validate the value against the eMMC (Extended CSD DRIVER_STRENGTH
[offset 197]) and revert to the default 50 ohm value if 40 ohm is invalid.

This is done to avoid changing the value for different boards.

Putting aside the merits of this approach, it is clear the eMMC's mask
of supported driver strengths is more reliable than the value provided
by BIOS. Add validation accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 51ced59cc02e ("mmc: sdhci-pci: Use ACPI DSM to get driver strength for some Intel devices")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200422111629.4899-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-pci-core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -490,6 +490,9 @@ static int intel_select_drive_strength(s
 	struct sdhci_pci_slot *slot = sdhci_priv(host);
 	struct intel_host *intel_host = sdhci_pci_priv(slot);
 
+	if (!(mmc_driver_type_mask(intel_host->drv_strength) & card_drv))
+		return 0;
+
 	return intel_host->drv_strength;
 }
 

[PATCH 4.14 10/26] ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit ef0b3203c758b6b8abdb5dca651880347eae6b8c upstream.

This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6590,6 +6590,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS),
+	SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),

[PATCH 4.14 11/26] ALSA: hda/hdmi: fix without unlocked before return

[Greg Kroah-Hartman]

From: Wu Bo <wubo40@huawei.com>

commit a2f647240998aa49632fb09b01388fdf2b87acfc upstream.

Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846

After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().

Fixes: 960a581e22d9 ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_hdmi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1849,8 +1849,10 @@ static bool check_non_pcm_per_cvt(struct
 	/* Add sanity check to pass klockwork check.
 	 * This should never happen.
 	 */
-	if (WARN_ON(spdif == NULL))
+	if (WARN_ON(spdif == NULL)) {
+		mutex_unlock(&codec->spdif_mutex);
 		return true;
+	}
 	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
 	mutex_unlock(&codec->spdif_mutex);
 	return non_pcm;

[PATCH 4.14 12/26] ALSA: pcm: oss: Place the plugin buffer overflow checks correctly

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 4285de0725b1bf73608abbcd35ad7fd3ddc0b61e upstream.

The checks of the plugin buffer overflow in the previous fix by commit
  f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
are put in the wrong places mistakenly, which leads to the expected
(repeated) sound when the rate plugin is involved.  Fix in the right
places.

Also, at those right places, the zero check is needed for the
termination node, so added there as well, and let's get it done,
finally.

Fixes: f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200424193350.19678-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/oss/pcm_plugin.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -211,21 +211,23 @@ static snd_pcm_sframes_t plug_client_siz
 	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin && drv_frames > 0) {
-			if (check_size && drv_frames > plugin->buf_frames)
-				drv_frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames)
 				drv_frames = plugin->src_frames(plugin, drv_frames);
+			if (check_size && plugin->buf_frames &&
+			    drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			plugin = plugin_prev;
 		}
 	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
 		plugin = snd_pcm_plug_first(plug);
 		while (plugin && drv_frames > 0) {
 			plugin_next = plugin->next;
+			if (check_size && plugin->buf_frames &&
+			    drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			if (plugin->dst_frames)
 				drv_frames = plugin->dst_frames(plugin, drv_frames);
-			if (check_size && drv_frames > plugin->buf_frames)
-				drv_frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else
@@ -251,26 +253,28 @@ static snd_pcm_sframes_t plug_slave_size
 		plugin = snd_pcm_plug_first(plug);
 		while (plugin && frames > 0) {
 			plugin_next = plugin->next;
+			if (check_size && plugin->buf_frames &&
+			    frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			if (plugin->dst_frames) {
 				frames = plugin->dst_frames(plugin, frames);
 				if (frames < 0)
 					return frames;
 			}
-			if (check_size && frames > plugin->buf_frames)
-				frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin) {
-			if (check_size && frames > plugin->buf_frames)
-				frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames) {
 				frames = plugin->src_frames(plugin, frames);
 				if (frames < 0)
 					return frames;
 			}
+			if (check_size && plugin->buf_frames &&
+			    frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			plugin = plugin_prev;
 		}
 	} else

[PATCH 4.14 13/26] PM: ACPI: Output correct message on target power state

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit a9b760b0266f563b4784f695bbd0e717610dc10a upstream.

Transitioned power state logged at the end of setting ACPI power.

However, D3cold won't be in the message because state can only be
D3hot at most.

Use target_state to corretly report when power state is D3cold.

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/device_pm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -227,13 +227,13 @@ int acpi_device_set_power(struct acpi_de
  end:
 	if (result) {
 		dev_warn(&device->dev, "Failed to change power state to %s\n",
-			 acpi_power_state_string(state));
+			 acpi_power_state_string(target_state));
 	} else {
 		device->power.state = target_state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device [%s] transitioned to %s\n",
 				  device->pnp.bus_id,
-				  acpi_power_state_string(state)));
+				  acpi_power_state_string(target_state)));
 	}
 
 	return result;

[PATCH 4.14 14/26] PM: hibernate: Freeze kernel threads in software_resume()

[Greg Kroah-Hartman]

From: Dexuan Cui <decui@microsoft.com>

commit 2351f8d295ed63393190e39c2f7c1fee1a80578f upstream.

Currently the kernel threads are not frozen in software_resume(), so
between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(),
system_freezable_power_efficient_wq can still try to submit SCSI
commands and this can cause a panic since the low level SCSI driver
(e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept
any SCSI commands: https://lkml.org/lkml/2020/4/10/47

At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying
to resolve the issue from hv_storvsc, but with the help of
Bart Van Assche, I realized it's better to fix software_resume(),
since this looks like a generic issue, not only pertaining to SCSI.

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/power/hibernate.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -892,6 +892,13 @@ static int software_resume(void)
 	error = freeze_processes();
 	if (error)
 		goto Close_Finish;
+
+	error = freeze_kernel_threads();
+	if (error) {
+		thaw_processes();
+		goto Close_Finish;
+	}
+
 	error = load_image_and_restore();
 	thaw_processes();
  Finish:

[PATCH 4.14 15/26] dm verity fec: fix hash block number in verity_fec_decode

[Greg Kroah-Hartman]

From: Sunwook Eom <speed.eom@samsung.com>

commit ad4e80a639fc61d5ecebb03caa5cdbfb91fcebfc upstream.

The error correction data is computed as if data and hash blocks
were concatenated. But hash block number starts from v->hash_start.
So, we have to calculate hash block number based on that.

Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Sunwook Eom <speed.eom@samsung.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-verity-fec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -436,7 +436,7 @@ int verity_fec_decode(struct dm_verity *
 	fio->level++;
 
 	if (type == DM_VERITY_BLOCK_TYPE_METADATA)
-		block += v->data_blocks;
+		block = block - v->hash_start + v->data_blocks;
 
 	/*
 	 * For RS(M, N), the continuous FEC data is divided into blocks of N

[PATCH 4.14 16/26] RDMA/mlx5: Set GRH fields in query QP on RoCE

[Greg Kroah-Hartman]

From: Aharon Landau <aharonl@mellanox.com>

commit 2d7e3ff7b6f2c614eb21d0dc348957a47eaffb57 upstream.

GRH fields such as sgid_index, hop limit, et. are set in the QP context
when QP is created/modified.

Currently, when query QP is performed, we fill the GRH fields only if the
GRH bit is set in the QP context, but this bit is not set for RoCE. Adjust
the check so we will set all relevant data for the RoCE too.

Since this data is returned to userspace, the below is an ABI regression.

Fixes: d8966fcd4c25 ("IB/core: Use rdma_ah_attr accessor functions")
Link: https://lore.kernel.org/r/20200413132028.930109-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4362,7 +4362,9 @@ static void to_rdma_ah_attr(struct mlx5_
 	rdma_ah_set_path_bits(ah_attr, path->grh_mlid & 0x7f);
 	rdma_ah_set_static_rate(ah_attr,
 				path->static_rate ? path->static_rate - 5 : 0);
-	if (path->grh_mlid & (1 << 7)) {
+
+	if (path->grh_mlid & (1 << 7) ||
+	    ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
 		u32 tc_fl = be32_to_cpu(path->tclass_flowlabel);
 
 		rdma_ah_set_grh(ah_attr, NULL,

[PATCH 4.14 17/26] RDMA/mlx4: Initialize ib_spec on the stack

[Greg Kroah-Hartman]

From: Alaa Hleihel <alaa@mellanox.com>

commit c08cfb2d8d78bfe81b37cc6ba84f0875bddd0d5c upstream.

Initialize ib_spec on the stack before using it, otherwise we will have
garbage values that will break creating default rules with invalid parsing
error.

Fixes: a37a1a428431 ("IB/mlx4: Add mechanism to support flow steering over IB links")
Link: https://lore.kernel.org/r/20200413132235.930642-1-leon@kernel.org
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1614,8 +1614,9 @@ static int __mlx4_ib_create_default_rule
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
+		union ib_flow_spec ib_spec = {};
 		int ret;
-		union ib_flow_spec ib_spec;
+
 		switch (pdefault_rules->rules_create_list[i]) {
 		case 0:
 			/* no rule */

[PATCH 4.14 18/26] vfio: avoid possible overflow in vfio_iommu_type1_pin_pages

[Greg Kroah-Hartman]

From: Yan Zhao <yan.y.zhao@intel.com>

commit 0ea971f8dcd6dee78a9a30ea70227cf305f11ff7 upstream.

add parentheses to avoid possible vaddr overflow.

Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vfio/vfio_iommu_type1.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -591,7 +591,7 @@ static int vfio_iommu_type1_pin_pages(vo
 			continue;
 		}
 
-		remote_vaddr = dma->vaddr + iova - dma->iova;
+		remote_vaddr = dma->vaddr + (iova - dma->iova);
 		ret = vfio_pin_page_external(dma, remote_vaddr, &phys_pfn[i],
 					     do_accounting);
 		if (ret)

[PATCH 4.14 19/26] vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit 5cbf3264bc715e9eb384e2b68601f8c02bb9a61d upstream.

Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that
vma->vm_pgoff holds the base PFN of the VMA.  This fixes a bug where
attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of
memory calculates garbage for the PFN.

Hilariously, this only got detected because the first "PFN" calculated
by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys()
uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin()
because the translation "failed".  PFN 0 is now unconditionally reserved
on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn()
to return true and in turns results in vaddr_get_pfn() returning success
for PFN 0.  Eventually the bogus calculation runs into PFNs that aren't
reserved and leads to failure in vfio_pin_map_dma().  The subsequent
call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs.

  WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ...
  CPU: 8 PID: 5130 Comm: sgx Tainted: G        W         5.6.0-rc5-705d787c7fee-vfio+ #3
  Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018
  RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe
  RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200
  RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2
  R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000
  R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08
  FS:  00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   vfio_remove_dma+0x17/0x70 [vfio_iommu_type1]
   vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1]
   ksys_ioctl+0x92/0xb0
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15d04c75d7
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48

Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vfio/vfio_iommu_type1.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -378,8 +378,8 @@ static int vaddr_get_pfn(struct mm_struc
 	vma = find_vma_intersection(mm, vaddr, vaddr + 1);
 
 	if (vma && vma->vm_flags & VM_PFNMAP) {
-		*pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
-		if (is_invalid_reserved_pfn(*pfn))
+		if (!follow_pfn(vma, vaddr, pfn) &&
+		    is_invalid_reserved_pfn(*pfn))
 			ret = 0;
 	}
 

[PATCH 4.14 20/26] iommu/qcom: Fix local_base status check

[Greg Kroah-Hartman]

From: Tang Bin <tangbin@cmss.chinamobile.com>

commit b52649aee6243ea661905bdc5fbe28cc5f6dec76 upstream.

The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.

Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/qcom_iommu.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/iommu/qcom_iommu.c
+++ b/drivers/iommu/qcom_iommu.c
@@ -775,8 +775,11 @@ static int qcom_iommu_device_probe(struc
 	qcom_iommu->dev = dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
+	if (res) {
 		qcom_iommu->local_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(qcom_iommu->local_base))
+			return PTR_ERR(qcom_iommu->local_base);
+	}
 
 	qcom_iommu->iface_clk = devm_clk_get(dev, "iface");
 	if (IS_ERR(qcom_iommu->iface_clk)) {

[PATCH 4.14 21/26] scsi: target/iblock: fix WRITE SAME zeroing

[Greg Kroah-Hartman]

From: David Disseldorp <ddiss@suse.de>

commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream.

SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero
"shall perform the specified write operation to each LBA specified by the
command".  Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to
blkdev_issue_zeroout") modified the iblock backend to call
blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a
zero data segment.

The iblock blkdev_issue_zeroout() call incorrectly provides a flags
parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP.  The bool
false parameter reflects the blkdev_issue_zeroout() API prior to commit
ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout")
which was merged shortly before 2237498f0b5c.

Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de
Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_iblock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -447,7 +447,7 @@ iblock_execute_zero_out(struct block_dev
 				target_to_linux_sector(dev, cmd->t_task_lba),
 				target_to_linux_sector(dev,
 					sbc_get_write_same_sectors(cmd)),
-				GFP_KERNEL, false);
+				GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
 	if (ret)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 

[PATCH 4.14 22/26] iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit b74aa02d7a30ee5e262072a7d6e8deff10b37924 upstream.

Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.

Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.

Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu_init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2809,7 +2809,7 @@ static int __init parse_amd_iommu_intr(c
 {
 	for (; *str; ++str) {
 		if (strncmp(str, "legacy", 6) == 0) {
-			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
+			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
 			break;
 		}
 		if (strncmp(str, "vapic", 5) == 0) {

[PATCH 4.14 23/26] ALSA: opti9xx: shut up gcc-10 range warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 5ce00760a84848d008554c693ceb6286f4d9c509 upstream.

gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:

sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  322 |   (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
  351 |   snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  873 |   (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
 1010 |   snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~

These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.

Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.

Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/isa/opti9xx/miro.c           |    9 ++++++---
 sound/isa/opti9xx/opti92x-ad1848.c |    9 ++++++---
 2 files changed, 12 insertions(+), 6 deletions(-)

--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -875,10 +875,13 @@ static void snd_miro_write(struct snd_mi
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
+static inline void snd_miro_write_mask(struct snd_miro *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_miro_read(chip, reg);
 
-#define snd_miro_write_mask(chip, reg, value, mask)	\
-	snd_miro_write(chip, reg,			\
-		(snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+	snd_miro_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 /*
  *  Proc Interface
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -327,10 +327,13 @@ static void snd_opti9xx_write(struct snd
 }
 
 
-#define snd_opti9xx_write_mask(chip, reg, value, mask)	\
-	snd_opti9xx_write(chip, reg,			\
-		(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+static inline void snd_opti9xx_write_mask(struct snd_opti9xx *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_opti9xx_read(chip, reg);
 
+	snd_opti9xx_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 static int snd_opti9xx_configure(struct snd_opti9xx *chip,
 					   long port,

[PATCH 4.14 24/26] nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 7648f939cb919b9d15c21fff8cd9eba908d595dc upstream.

nfs3_set_acl keeps track of the acl it allocated locally to determine if an acl
needs to be released at the end.  This results in a memory leak when the
function allocates an acl as well as a default acl.  Fix by releasing acls
that differ from the acl originally passed into nfs3_set_acl.

Fixes: b7fa0554cf1b ("[PATCH] NFS: Add support for NFSv3 ACLs")
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs3acl.c |   22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -253,37 +253,45 @@ int nfs3_proc_setacls(struct inode *inod
 
 int nfs3_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 {
-	struct posix_acl *alloc = NULL, *dfacl = NULL;
+	struct posix_acl *orig = acl, *dfacl = NULL, *alloc;
 	int status;
 
 	if (S_ISDIR(inode->i_mode)) {
 		switch(type) {
 		case ACL_TYPE_ACCESS:
-			alloc = dfacl = get_acl(inode, ACL_TYPE_DEFAULT);
+			alloc = get_acl(inode, ACL_TYPE_DEFAULT);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = alloc;
 			break;
 
 		case ACL_TYPE_DEFAULT:
-			dfacl = acl;
-			alloc = acl = get_acl(inode, ACL_TYPE_ACCESS);
+			alloc = get_acl(inode, ACL_TYPE_ACCESS);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = acl;
+			acl = alloc;
 			break;
 		}
 	}
 
 	if (acl == NULL) {
-		alloc = acl = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
+		alloc = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
 		if (IS_ERR(alloc))
 			goto fail;
+		acl = alloc;
 	}
 	status = __nfs3_proc_setacls(inode, acl, dfacl);
-	posix_acl_release(alloc);
+out:
+	if (acl != orig)
+		posix_acl_release(acl);
+	if (dfacl != orig)
+		posix_acl_release(dfacl);
 	return status;
 
 fail:
-	return PTR_ERR(alloc);
+	status = PTR_ERR(alloc);
+	goto out;
 }
 
 const struct xattr_handler *nfs3_xattr_handlers[] = {

[PATCH 4.14 25/26] dmaengine: dmatest: Fix iteration non-stop logic

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit b9f960201249f20deea586b4ec814669b4c6b1c0 upstream.

Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,

	grep -H . /sys/module/dmatest/parameters/*

the iterations parameter is not respected and test is going on and on until
user gives

	echo 0 > /sys/module/dmatest/parameters/run

This is not what expected.

The history of this bug is interesting. I though that the commit
  2d88ce76eb98 ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit
  0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.

So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.

Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.

Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/dmatest.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -552,8 +552,8 @@ static int dmatest_func(void *data)
 	flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
 
 	ktime = ktime_get();
-	while (!kthread_should_stop()
-	       && !(params->iterations && total_tests >= params->iterations)) {
+	while (!(kthread_should_stop() ||
+	       (params->iterations && total_tests >= params->iterations))) {
 		struct dma_async_tx_descriptor *tx = NULL;
 		struct dmaengine_unmap_data *um;
 		dma_addr_t srcs[src_cnt];

[PATCH 4.14 26/26] selinux: properly handle multiple messages in selinux_netlink_send()

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

commit fb73974172ffaaf57a7c42f35424d9aece1a5af6 upstream.

Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control.  Prior to this patch, SELinux only inspected
the first message in the sk_buff.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/hooks.c |   68 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 24 deletions(-)

--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -5121,39 +5121,59 @@ static int selinux_tun_dev_open(void *se
 
 static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
 {
-	int err = 0;
-	u32 perm;
+	int rc = 0;
+	unsigned int msg_len;
+	unsigned int data_len = skb->len;
+	unsigned char *data = skb->data;
 	struct nlmsghdr *nlh;
 	struct sk_security_struct *sksec = sk->sk_security;
+	u16 sclass = sksec->sclass;
+	u32 perm;
 
-	if (skb->len < NLMSG_HDRLEN) {
-		err = -EINVAL;
-		goto out;
-	}
-	nlh = nlmsg_hdr(skb);
+	while (data_len >= nlmsg_total_size(0)) {
+		nlh = (struct nlmsghdr *)data;
 
-	err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
-	if (err) {
-		if (err == -EINVAL) {
+		/* NOTE: the nlmsg_len field isn't reliably set by some netlink
+		 *       users which means we can't reject skb's with bogus
+		 *       length fields; our solution is to follow what
+		 *       netlink_rcv_skb() does and simply skip processing at
+		 *       messages with length fields that are clearly junk
+		 */
+		if (nlh->nlmsg_len < NLMSG_HDRLEN || nlh->nlmsg_len > data_len)
+			return 0;
+
+		rc = selinux_nlmsg_lookup(sclass, nlh->nlmsg_type, &perm);
+		if (rc == 0) {
+			rc = sock_has_perm(sk, perm);
+			if (rc)
+				return rc;
+		} else if (rc == -EINVAL) {
+			/* -EINVAL is a missing msg/perm mapping */
 			pr_warn_ratelimited("SELinux: unrecognized netlink"
-			       " message: protocol=%hu nlmsg_type=%hu sclass=%s"
-			       " pig=%d comm=%s\n",
-			       sk->sk_protocol, nlh->nlmsg_type,
-			       secclass_map[sksec->sclass - 1].name,
-			       task_pid_nr(current), current->comm);
-			if (!selinux_enforcing || security_get_allow_unknown())
-				err = 0;
+				" message: protocol=%hu nlmsg_type=%hu sclass=%s"
+				" pid=%d comm=%s\n",
+				sk->sk_protocol, nlh->nlmsg_type,
+				secclass_map[sclass - 1].name,
+				task_pid_nr(current), current->comm);
+			if (selinux_enforcing && !security_get_allow_unknown())
+				return rc;
+			rc = 0;
+		} else if (rc == -ENOENT) {
+			/* -ENOENT is a missing socket/class mapping, ignore */
+			rc = 0;
+		} else {
+			return rc;
 		}
 
-		/* Ignore */
-		if (err == -ENOENT)
-			err = 0;
-		goto out;
+		/* move to the next message after applying netlink padding */
+		msg_len = NLMSG_ALIGN(nlh->nlmsg_len);
+		if (msg_len >= data_len)
+			return 0;
+		data_len -= msg_len;
+		data += msg_len;
 	}
 
-	err = sock_has_perm(sk, perm);
-out:
-	return err;
+	return rc;
 }
 
 #ifdef CONFIG_NETFILTER

Re: [PATCH 4.14 00/26] 4.14.179-rc1 review

[Jon Hunter]

On 04/05/2020 18:57, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.179 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 May 2020 16:52:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.179-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.179-rc1-g6d39cf919746
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/26] 4.14.179-rc1 review

[Naresh Kamboju]

On Mon, 4 May 2020 at 23:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.179 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 06 May 2020 16:52:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.179-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.179-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 6d39cf91974673a74d6d976ecc107e43bb5c3eb4
git describe: v4.14.178-27-g6d39cf919746
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.178-27-g6d39cf919746

No regressions (compared to build v4.14.178)

No fixes (compared to build v4.14.178)

Ran 28789 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest/networking
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-sched-tests
* ltp-syscalls-tests
* v4l2-compliance
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* network-basic-tests
* perf
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/26] 4.14.179-rc1 review

[Guenter Roeck]

On 5/4/20 10:57 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.179 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 May 2020 16:52:55 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 171 pass: 171 fail: 0
Qemu test results:
	total: 404 pass: 404 fail: 0

Guenter

Re: [PATCH 4.14 00/26] 4.14.179-rc1 review

[shuah]

On 5/4/20 11:57 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.179 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 06 May 2020 16:52:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.179-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah