[PATCH v4 00/10] Multiple fixes in PCIe qcom driver

[PATCH v4 00/10] Multiple fixes in PCIe qcom driver

[Ansuel Smith]

This contains multiple fix for PCIe qcom driver.
Some optional reset and clocks were missing.
Fix a problem with no PARF programming that cause kernel lock on load.
Add support to force gen 1 speed if needed. (due to hardware limitation)
Add ipq8064 rev 2 support that use a different tx termination offset.

v4:
* Fix grammar error across all patch subject
* Use bulk api for clks
* Program PARF only in ipq8064 SoC
* Program tx term only in ipq8064 SoC
* Drop configurable tx-dempth rx-eq
* Make added clk optional

v3:
* Fix check reported by checkpatch --strict
* Rename force_gen1 to gen

v2:
* Drop iATU programming (already done in pcie init)
* Use max-link-speed instead of force-gen1 custom definition
* Drop MRRS to 256B (Can't find a realy reason why this was suggested)
* Introduce a new variant for different revision of ipq8064

Abhishek Sahu (1):
  PCI: qcom: Change duplicate PCI reset to phy reset

Ansuel Smith (8):
  PCI: qcom: Add missing ipq806x clocks in PCIe driver
  dt-bindings: PCI: qcom: Add missing clks
  PCI: qcom: Add missing reset for ipq806x
  dt-bindings: PCI: qcom: Add ext reset
  PCI: qcom: Use bulk clk api and assert on error
  PCI: qcom: Define some PARF params needed for ipq8064 SoC
  PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
  dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant

Sham Muthayyan (1):
  PCI: qcom: Add Force GEN1 support

 .../devicetree/bindings/pci/qcom,pcie.txt     |  15 +-
 drivers/pci/controller/dwc/pcie-qcom.c        | 171 ++++++++++++------
 2 files changed, 123 insertions(+), 63 deletions(-)

-- 
2.25.1

[PATCH v4 01/10] PCI: qcom: Add missing ipq806x clocks in PCIe driver

[Ansuel Smith]

Aux and Ref clk are missing in PCIe qcom driver. Add support for this
optional clks for ipq8064/apq8064 SoC.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 38 ++++++++++++++++++++++----
 1 file changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 5ea527a6bd9f..4bf93ab8c7a7 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -88,6 +88,8 @@ struct qcom_pcie_resources_2_1_0 {
 	struct clk *iface_clk;
 	struct clk *core_clk;
 	struct clk *phy_clk;
+	struct clk *aux_clk;
+	struct clk *ref_clk;
 	struct reset_control *pci_reset;
 	struct reset_control *axi_reset;
 	struct reset_control *ahb_reset;
@@ -246,6 +248,14 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 	if (IS_ERR(res->phy_clk))
 		return PTR_ERR(res->phy_clk);
 
+	res->aux_clk = devm_clk_get_optional(dev, "aux");
+	if (IS_ERR(res->aux_clk))
+		return PTR_ERR(res->aux_clk);
+
+	res->ref_clk = devm_clk_get_optional(dev, "ref");
+	if (IS_ERR(res->ref_clk))
+		return PTR_ERR(res->ref_clk);
+
 	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
 	if (IS_ERR(res->pci_reset))
 		return PTR_ERR(res->pci_reset);
@@ -278,6 +288,8 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->iface_clk);
 	clk_disable_unprepare(res->core_clk);
 	clk_disable_unprepare(res->phy_clk);
+	clk_disable_unprepare(res->aux_clk);
+	clk_disable_unprepare(res->ref_clk);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
@@ -307,16 +319,28 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		goto err_assert_ahb;
 	}
 
+	ret = clk_prepare_enable(res->core_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_core;
+	}
+
 	ret = clk_prepare_enable(res->phy_clk);
 	if (ret) {
 		dev_err(dev, "cannot prepare/enable phy clock\n");
 		goto err_clk_phy;
 	}
 
-	ret = clk_prepare_enable(res->core_clk);
+	ret = clk_prepare_enable(res->aux_clk);
 	if (ret) {
-		dev_err(dev, "cannot prepare/enable core clock\n");
-		goto err_clk_core;
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_clk_aux;
+	}
+
+	ret = clk_prepare_enable(res->ref_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable ref clock\n");
+		goto err_clk_ref;
 	}
 
 	ret = reset_control_deassert(res->ahb_reset);
@@ -372,10 +396,14 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	return 0;
 
 err_deassert_ahb:
-	clk_disable_unprepare(res->core_clk);
-err_clk_core:
+	clk_disable_unprepare(res->ref_clk);
+err_clk_ref:
+	clk_disable_unprepare(res->aux_clk);
+err_clk_aux:
 	clk_disable_unprepare(res->phy_clk);
 err_clk_phy:
+	clk_disable_unprepare(res->core_clk);
+err_clk_core:
 	clk_disable_unprepare(res->iface_clk);
 err_assert_ahb:
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-- 
2.25.1

Re: [PATCH v4 01/10] PCI: qcom: Add missing ipq806x clocks in PCIe driver

[Rob Herring]

On Thu, 14 May 2020 22:07:02 +0200, Ansuel Smith wrote:
> Aux and Ref clk are missing in PCIe qcom driver. Add support for this
> optional clks for ipq8064/apq8064 SoC.
> 
> Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 38 ++++++++++++++++++++++----
>  1 file changed, 33 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v4 02/10] dt-bindings: PCI: qcom: Add missing clks

[Ansuel Smith]

Document missing clks used in ipq8064 SoC.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pci/qcom,pcie.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 981b4de12807..becdbdc0fffa 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -90,6 +90,8 @@
 	Definition: Should contain the following entries
 			- "core"	Clocks the pcie hw block
 			- "phy"		Clocks the pcie PHY block
+			- "aux" 	Clocks the pcie AUX block
+			- "ref" 	Clocks the pcie ref block
 - clock-names:
 	Usage: required for apq8084/ipq4019
 	Value type: <stringlist>
@@ -277,8 +279,10 @@
 				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 		clocks = <&gcc PCIE_A_CLK>,
 			 <&gcc PCIE_H_CLK>,
-			 <&gcc PCIE_PHY_CLK>;
-		clock-names = "core", "iface", "phy";
+			 <&gcc PCIE_PHY_CLK>,
+			 <&gcc PCIE_AUX_CLK>,
+			 <&gcc PCIE_ALT_REF_CLK>;
+		clock-names = "core", "iface", "phy", "aux", "ref";
 		resets = <&gcc PCIE_ACLK_RESET>,
 			 <&gcc PCIE_HCLK_RESET>,
 			 <&gcc PCIE_POR_RESET>,
-- 
2.25.1

[PATCH v4 03/10] PCI: qcom: Change duplicate PCI reset to phy reset

[Ansuel Smith]

From: Abhishek Sahu <absahu@codeaurora.org>

The deinit issues reset_control_assert for PCI twice and does not contain
phy reset.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4bf93ab8c7a7..4512c2c5f61c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -280,14 +280,14 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 
+	clk_disable_unprepare(res->phy_clk);
 	reset_control_assert(res->pci_reset);
 	reset_control_assert(res->axi_reset);
 	reset_control_assert(res->ahb_reset);
 	reset_control_assert(res->por_reset);
-	reset_control_assert(res->pci_reset);
+	reset_control_assert(res->phy_reset);
 	clk_disable_unprepare(res->iface_clk);
 	clk_disable_unprepare(res->core_clk);
-	clk_disable_unprepare(res->phy_clk);
 	clk_disable_unprepare(res->aux_clk);
 	clk_disable_unprepare(res->ref_clk);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
@@ -325,12 +325,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		goto err_clk_core;
 	}
 
-	ret = clk_prepare_enable(res->phy_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable phy clock\n");
-		goto err_clk_phy;
-	}
-
 	ret = clk_prepare_enable(res->aux_clk);
 	if (ret) {
 		dev_err(dev, "cannot prepare/enable aux clock\n");
@@ -383,6 +377,12 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
+	ret = clk_prepare_enable(res->phy_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable phy clock\n");
+		goto err_deassert_ahb;
+	}
+
 	/* wait for clock acquisition */
 	usleep_range(1000, 1500);
 
@@ -400,8 +400,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 err_clk_ref:
 	clk_disable_unprepare(res->aux_clk);
 err_clk_aux:
-	clk_disable_unprepare(res->phy_clk);
-err_clk_phy:
 	clk_disable_unprepare(res->core_clk);
 err_clk_core:
 	clk_disable_unprepare(res->iface_clk);
-- 
2.25.1

[PATCH v4 04/10] PCI: qcom: Add missing reset for ipq806x

[Ansuel Smith]

Add missing ext reset used by ipq8064 SoC in PCIe qcom driver.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v4.5+
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4512c2c5f61c..4dab5ef630cc 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -95,6 +95,7 @@ struct qcom_pcie_resources_2_1_0 {
 	struct reset_control *ahb_reset;
 	struct reset_control *por_reset;
 	struct reset_control *phy_reset;
+	struct reset_control *ext_reset;
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
 };
 
@@ -272,6 +273,10 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 	if (IS_ERR(res->por_reset))
 		return PTR_ERR(res->por_reset);
 
+	res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext");
+	if (IS_ERR(res->ext_reset))
+		return PTR_ERR(res->ext_reset);
+
 	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
 	return PTR_ERR_OR_ZERO(res->phy_reset);
 }
@@ -285,6 +290,7 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 	reset_control_assert(res->axi_reset);
 	reset_control_assert(res->ahb_reset);
 	reset_control_assert(res->por_reset);
+	reset_control_assert(res->ext_reset);
 	reset_control_assert(res->phy_reset);
 	clk_disable_unprepare(res->iface_clk);
 	clk_disable_unprepare(res->core_clk);
@@ -343,6 +349,12 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		goto err_deassert_ahb;
 	}
 
+	ret = reset_control_deassert(res->ext_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert ext reset\n");
+		goto err_deassert_ahb;
+	}
+
 	/* enable PCIe clocks and resets */
 	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
 	val &= ~BIT(0);
-- 
2.25.1

[PATCH v4 05/10] dt-bindings: PCI: qcom: Add ext reset

[Ansuel Smith]

Document ext reset used in ipq8064 SoC by qcom PCIe driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pci/qcom,pcie.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index becdbdc0fffa..6efcef040741 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -179,6 +179,7 @@
 			- "pwr"			PWR reset
 			- "ahb"			AHB reset
 			- "phy_ahb"		PHY AHB reset
+			- "ext"			EXT reset
 
 - reset-names:
 	Usage: required for ipq8074
@@ -287,8 +288,9 @@
 			 <&gcc PCIE_HCLK_RESET>,
 			 <&gcc PCIE_POR_RESET>,
 			 <&gcc PCIE_PCI_RESET>,
-			 <&gcc PCIE_PHY_RESET>;
-		reset-names = "axi", "ahb", "por", "pci", "phy";
+			 <&gcc PCIE_PHY_RESET>,
+			 <&gcc PCIE_EXT_RESET>;
+		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
 		pinctrl-0 = <&pcie_pins_default>;
 		pinctrl-names = "default";
 	};
-- 
2.25.1

[PATCH v4 06/10] PCI: qcom: Use bulk clk api and assert on error

[Ansuel Smith]

Rework 2.1.0 revision to use bulk clk api and fix missing assert on
reset_control_deassert error.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 131 +++++++++----------------
 1 file changed, 46 insertions(+), 85 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4dab5ef630cc..f2ea1ab6f584 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -84,12 +84,9 @@
 #define DEVICE_TYPE_RC				0x4
 
 #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
+#define QCOM_PCIE_2_1_0_MAX_CLOCKS	5
 struct qcom_pcie_resources_2_1_0 {
-	struct clk *iface_clk;
-	struct clk *core_clk;
-	struct clk *phy_clk;
-	struct clk *aux_clk;
-	struct clk *ref_clk;
+	struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS];
 	struct reset_control *pci_reset;
 	struct reset_control *axi_reset;
 	struct reset_control *ahb_reset;
@@ -237,25 +234,21 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 	if (ret)
 		return ret;
 
-	res->iface_clk = devm_clk_get(dev, "iface");
-	if (IS_ERR(res->iface_clk))
-		return PTR_ERR(res->iface_clk);
-
-	res->core_clk = devm_clk_get(dev, "core");
-	if (IS_ERR(res->core_clk))
-		return PTR_ERR(res->core_clk);
-
-	res->phy_clk = devm_clk_get(dev, "phy");
-	if (IS_ERR(res->phy_clk))
-		return PTR_ERR(res->phy_clk);
+	res->clks[0].id = "iface";
+	res->clks[1].id = "core";
+	res->clks[2].id = "phy";
+	res->clks[3].id = "aux";
+	res->clks[4].id = "ref";
 
-	res->aux_clk = devm_clk_get_optional(dev, "aux");
-	if (IS_ERR(res->aux_clk))
-		return PTR_ERR(res->aux_clk);
+	/* iface, core, phy are required */
+	ret = devm_clk_bulk_get(dev, 3, res->clks);
+	if (ret < 0)
+		return ret;
 
-	res->ref_clk = devm_clk_get_optional(dev, "ref");
-	if (IS_ERR(res->ref_clk))
-		return PTR_ERR(res->ref_clk);
+	/* aux, ref are optional */
+	ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3);
+	if (ret < 0)
+		return ret;
 
 	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
 	if (IS_ERR(res->pci_reset))
@@ -285,17 +278,13 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 
-	clk_disable_unprepare(res->phy_clk);
+	clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
 	reset_control_assert(res->pci_reset);
 	reset_control_assert(res->axi_reset);
 	reset_control_assert(res->ahb_reset);
 	reset_control_assert(res->por_reset);
 	reset_control_assert(res->ext_reset);
 	reset_control_assert(res->phy_reset);
-	clk_disable_unprepare(res->iface_clk);
-	clk_disable_unprepare(res->core_clk);
-	clk_disable_unprepare(res->aux_clk);
-	clk_disable_unprepare(res->ref_clk);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
@@ -313,36 +302,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	ret = reset_control_assert(res->ahb_reset);
-	if (ret) {
-		dev_err(dev, "cannot assert ahb reset\n");
-		goto err_assert_ahb;
-	}
-
-	ret = clk_prepare_enable(res->iface_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable iface clock\n");
-		goto err_assert_ahb;
-	}
-
-	ret = clk_prepare_enable(res->core_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable core clock\n");
-		goto err_clk_core;
-	}
-
-	ret = clk_prepare_enable(res->aux_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable aux clock\n");
-		goto err_clk_aux;
-	}
-
-	ret = clk_prepare_enable(res->ref_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable ref clock\n");
-		goto err_clk_ref;
-	}
-
 	ret = reset_control_deassert(res->ahb_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert ahb reset\n");
@@ -352,48 +311,46 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	ret = reset_control_deassert(res->ext_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert ext reset\n");
-		goto err_deassert_ahb;
+		goto err_deassert_ext;
 	}
 
-	/* enable PCIe clocks and resets */
-	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-	val &= ~BIT(0);
-	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
-	/* enable external reference clock */
-	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-	val |= BIT(16);
-	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
-
 	ret = reset_control_deassert(res->phy_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert phy reset\n");
-		return ret;
+		goto err_deassert_phy;
 	}
 
 	ret = reset_control_deassert(res->pci_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert pci reset\n");
-		return ret;
+		goto err_deassert_pci;
 	}
 
 	ret = reset_control_deassert(res->por_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert por reset\n");
-		return ret;
+		goto err_deassert_por;
 	}
 
 	ret = reset_control_deassert(res->axi_reset);
 	if (ret) {
 		dev_err(dev, "cannot deassert axi reset\n");
-		return ret;
+		goto err_deassert_axi;
 	}
 
-	ret = clk_prepare_enable(res->phy_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable phy clock\n");
-		goto err_deassert_ahb;
-	}
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
+	if (ret)
+		goto err_clks;
+
+	/* enable PCIe clocks and resets */
+	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+	val &= ~BIT(0);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+	/* enable external reference clock */
+	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+	val |= BIT(16);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
 
 	/* wait for clock acquisition */
 	usleep_range(1000, 1500);
@@ -407,15 +364,19 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 
 	return 0;
 
+err_clks:
+	reset_control_assert(res->axi_reset);
+err_deassert_axi:
+	reset_control_assert(res->por_reset);
+err_deassert_por:
+	reset_control_assert(res->pci_reset);
+err_deassert_pci:
+	reset_control_assert(res->phy_reset);
+err_deassert_phy:
+	reset_control_assert(res->ext_reset);
+err_deassert_ext:
+	reset_control_assert(res->ahb_reset);
 err_deassert_ahb:
-	clk_disable_unprepare(res->ref_clk);
-err_clk_ref:
-	clk_disable_unprepare(res->aux_clk);
-err_clk_aux:
-	clk_disable_unprepare(res->core_clk);
-err_clk_core:
-	clk_disable_unprepare(res->iface_clk);
-err_assert_ahb:
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 
 	return ret;
-- 
2.25.1

Re: [PATCH v4 06/10] PCI: qcom: Use bulk clk api and assert on error

[Rob Herring]

On Thu, 14 May 2020 22:07:07 +0200, Ansuel Smith wrote:
> Rework 2.1.0 revision to use bulk clk api and fix missing assert on
> reset_control_deassert error.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 131 +++++++++----------------
>  1 file changed, 46 insertions(+), 85 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v4 07/10] PCI: qcom: Define some PARF params needed for ipq8064 SoC

[Ansuel Smith]

Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
needed on some ipq8064 based device (Netgear R7800 for example). Without
this the system locks on kernel load.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v4.5+
---
 drivers/pci/controller/dwc/pcie-qcom.c | 27 ++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f2ea1ab6f584..f5398b0d270c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -46,6 +46,9 @@
 
 #define PCIE20_PARF_PHY_CTRL			0x40
 #define PCIE20_PARF_PHY_REFCLK			0x4C
+#define PHY_REFCLK_SSP_EN			BIT(16)
+#define PHY_REFCLK_USE_PAD			BIT(12)
+
 #define PCIE20_PARF_DBI_BASE_ADDR		0x168
 #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16C
 #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL	0x174
@@ -77,6 +80,18 @@
 #define DBI_RO_WR_EN				1
 
 #define PERST_DELAY_US				1000
+/* PARF registers */
+#define PCIE20_PARF_PCS_DEEMPH			0x34
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x)		((x) << 16)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)	((x) << 8)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)	((x) << 0)
+
+#define PCIE20_PARF_PCS_SWING			0x38
+#define PCS_SWING_TX_SWING_FULL(x)		((x) << 8)
+#define PCS_SWING_TX_SWING_LOW(x)		((x) << 0)
+
+#define PCIE20_PARF_CONFIG_BITS		0x50
+#define PHY_RX0_EQ(x)				((x) << 24)
 
 #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
 #define SLV_ADDR_SPACE_SZ			0x10000000
@@ -293,6 +308,7 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
+	struct device_node *node = dev->of_node;
 	u32 val;
 	int ret;
 
@@ -347,6 +363,17 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	val &= ~BIT(0);
 	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
 
+	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
+			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
+			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
+		       pcie->parf + PCIE20_PARF_PCS_DEEMPH);
+		writel(PCS_SWING_TX_SWING_FULL(120) |
+			       PCS_SWING_TX_SWING_LOW(120),
+		       pcie->parf + PCIE20_PARF_PCS_SWING);
+		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
+	}
+
 	/* enable external reference clock */
 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
 	val |= BIT(16);
-- 
2.25.1

Re: [PATCH v4 07/10] PCI: qcom: Define some PARF params needed for ipq8064 SoC

[Rob Herring]

On Thu, 14 May 2020 22:07:08 +0200, Ansuel Smith wrote:
> Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization
> needed on some ipq8064 based device (Netgear R7800 for example). Without
> this the system locks on kernel load.
> 
> Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> Cc: stable@vger.kernel.org # v4.5+
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 27 ++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset

[Ansuel Smith]

Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 revision
and ipq8065 have the tx term offset set to 0.

Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f5398b0d270c..ab6f1bdd24c3 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -45,6 +45,9 @@
 #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
 
 #define PCIE20_PARF_PHY_CTRL			0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
+
 #define PCIE20_PARF_PHY_REFCLK			0x4C
 #define PHY_REFCLK_SSP_EN			BIT(16)
 #define PHY_REFCLK_USE_PAD			BIT(12)
@@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	val &= ~BIT(0);
 	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
 
-	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+	if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
+	    of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
 		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
 			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
 			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
@@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
 	}
 
+	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
+		/* set TX termination offset */
+		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
+		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
+		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+	}
+
 	/* enable external reference clock */
 	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-	val |= BIT(16);
+	val &= ~PHY_REFCLK_USE_PAD;
+	val |= PHY_REFCLK_SSP_EN;
 	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
 
 	/* wait for clock acquisition */
@@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
 	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
 	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
 	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
-- 
2.25.1

Re: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset

[Rob Herring]

On Thu, May 14, 2020 at 10:07:09PM +0200, Ansuel Smith wrote:
> Add tx term offset support to pcie qcom driver need in some revision of
> the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 revision
> and ipq8065 have the tx term offset set to 0.

Seems like this should be 2 patches or why isn't 'Ipq8064 have tx term 
offset set to 7' done in the prior patch? One tweak is needed for 
stable, but this isn't?

> 
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index f5398b0d270c..ab6f1bdd24c3 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -45,6 +45,9 @@
>  #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
>  
>  #define PCIE20_PARF_PHY_CTRL			0x40
> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> +
>  #define PCIE20_PARF_PHY_REFCLK			0x4C
>  #define PHY_REFCLK_SSP_EN			BIT(16)
>  #define PHY_REFCLK_USE_PAD			BIT(12)
> @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
>  	val &= ~BIT(0);
>  	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>  
> -	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
> +	    of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
>  		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
>  			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
>  			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
> @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
>  		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
>  	}
>  
> +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> +		/* set TX termination offset */
> +		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> +		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
> +		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
> +		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> +	}
> +
>  	/* enable external reference clock */
>  	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> -	val |= BIT(16);
> +	val &= ~PHY_REFCLK_USE_PAD;
> +	val |= PHY_REFCLK_SSP_EN;
>  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
>  
>  	/* wait for clock acquisition */
> @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
>  	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
> +	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
>  	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
>  	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
>  	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
> -- 
> 2.25.1
> 

R: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset

[ansuelsmth]

> -----Messaggio originale-----
> Da: Rob Herring <robh@kernel.org>
> Inviato: lunedì 1 giugno 2020 23:09
> A: Ansuel Smith <ansuelsmth@gmail.com>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>; Sham Muthayyan
> <smuthayy@codeaurora.org>; Andy Gross <agross@kernel.org>; Bjorn
> Helgaas <bhelgaas@google.com>; Mark Rutland
> <mark.rutland@arm.com>; Stanimir Varbanov <svarbanov@mm-sol.com>;
> Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>; Andrew Murray
> <amurray@thegoodpenguin.co.uk>; Philipp Zabel
> <p.zabel@pengutronix.de>; linux-arm-msm@vger.kernel.org; linux-
> pci@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Oggetto: Re: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and
> set tx term offset
> 
> On Thu, May 14, 2020 at 10:07:09PM +0200, Ansuel Smith wrote:
> > Add tx term offset support to pcie qcom driver need in some revision of
> > the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2
> revision
> > and ipq8065 have the tx term offset set to 0.
> 
> Seems like this should be 2 patches or why isn't 'Ipq8064 have tx term
> offset set to 7' done in the prior patch? One tweak is needed for
> stable, but this isn't?
> 

Ok i will split this in 2 patch and set for stable the tx term patch.

> >
> > Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
> >  1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> b/drivers/pci/controller/dwc/pcie-qcom.c
> > index f5398b0d270c..ab6f1bdd24c3 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -45,6 +45,9 @@
> >  #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
> >
> >  #define PCIE20_PARF_PHY_CTRL			0x40
> > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20,
> 16)
> > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> > +
> >  #define PCIE20_PARF_PHY_REFCLK			0x4C
> >  #define PHY_REFCLK_SSP_EN			BIT(16)
> >  #define PHY_REFCLK_USE_PAD			BIT(12)
> > @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct
> qcom_pcie *pcie)
> >  	val &= ~BIT(0);
> >  	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> >
> > -	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> > +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
> > +	    of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
> >  		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
> >  			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
> >  			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
> > @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct
> qcom_pcie *pcie)
> >  		writel(PHY_RX0_EQ(4), pcie->parf +
> PCIE20_PARF_CONFIG_BITS);
> >  	}
> >
> > +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> > +		/* set TX termination offset */
> > +		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> > +		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
> > +		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
> > +		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> > +	}
> > +
> >  	/* enable external reference clock */
> >  	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> > -	val |= BIT(16);
> > +	val &= ~PHY_REFCLK_USE_PAD;
> > +	val |= PHY_REFCLK_SSP_EN;
> >  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
> >
> >  	/* wait for clock acquisition */
> > @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct
> platform_device *pdev)
> >  static const struct of_device_id qcom_pcie_match[] = {
> >  	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
> >  	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
> > +	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
> >  	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
> >  	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
> >  	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
> > --
> > 2.25.1
> >

Re: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset

[Stanimir Varbanov]

Hi,

On 5/14/20 11:07 PM, Ansuel Smith wrote:
> Add tx term offset support to pcie qcom driver need in some revision of
> the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 revision
> and ipq8065 have the tx term offset set to 0.
> 
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index f5398b0d270c..ab6f1bdd24c3 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -45,6 +45,9 @@
>  #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
>  
>  #define PCIE20_PARF_PHY_CTRL			0x40
> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)

I see you changed the mask, did you found the issue in previous v3 mask
and shift?

> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> +
>  #define PCIE20_PARF_PHY_REFCLK			0x4C
>  #define PHY_REFCLK_SSP_EN			BIT(16)
>  #define PHY_REFCLK_USE_PAD			BIT(12)
> @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
>  	val &= ~BIT(0);
>  	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>  
> -	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |

this should be logical OR

> +	    of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
>  		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
>  			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
>  			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
> @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
>  		writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
>  	}
>  
> +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> +		/* set TX termination offset */
> +		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> +		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
> +		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
> +		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> +	}
> +
>  	/* enable external reference clock */
>  	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> -	val |= BIT(16);
> +	val &= ~PHY_REFCLK_USE_PAD;
> +	val |= PHY_REFCLK_SSP_EN;
>  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
>  
>  	/* wait for clock acquisition */
> @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
>  	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
> +	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
>  	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
>  	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
>  	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
> 

-- 
regards,
Stan

R: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset

[ansuelsmth]

> -----Messaggio originale-----
> Da: Stanimir Varbanov <svarbanov@mm-sol.com>
> Inviato: martedì 2 giugno 2020 09:54
> A: Ansuel Smith <ansuelsmth@gmail.com>; Bjorn Andersson
> <bjorn.andersson@linaro.org>
> Cc: Sham Muthayyan <smuthayy@codeaurora.org>; Andy Gross
> <agross@kernel.org>; Bjorn Helgaas <bhelgaas@google.com>; Rob Herring
> <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Lorenzo
> Pieralisi <lorenzo.pieralisi@arm.com>; Andrew Murray
> <amurray@thegoodpenguin.co.uk>; Philipp Zabel
> <p.zabel@pengutronix.de>; linux-arm-msm@vger.kernel.org; linux-
> pci@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Oggetto: Re: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and
> set tx term offset
> 
> Hi,
> 
> On 5/14/20 11:07 PM, Ansuel Smith wrote:
> > Add tx term offset support to pcie qcom driver need in some revision of
> > the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2
> revision
> > and ipq8065 have the tx term offset set to 0.
> >
> > Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
> >  1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> b/drivers/pci/controller/dwc/pcie-qcom.c
> > index f5398b0d270c..ab6f1bdd24c3 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -45,6 +45,9 @@
> >  #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
> >
> >  #define PCIE20_PARF_PHY_CTRL			0x40
> > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20,
> 16)
> 
> I see you changed the mask, did you found the issue in previous v3 mask
> and shift?
> 

I checked the original code and the old GENMASK declaration was wrong as you
suggested.

> > +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> > +
> >  #define PCIE20_PARF_PHY_REFCLK			0x4C
> >  #define PHY_REFCLK_SSP_EN			BIT(16)
> >  #define PHY_REFCLK_USE_PAD			BIT(12)
> > @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct
> qcom_pcie *pcie)
> >  	val &= ~BIT(0);
> >  	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> >
> > -	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> > +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
> 
> this should be logical OR
> 

Will change in v5 since I will have to split this

> > +	    of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
> >  		writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
> >  			       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
> >  			       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
> > @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct
> qcom_pcie *pcie)
> >  		writel(PHY_RX0_EQ(4), pcie->parf +
> PCIE20_PARF_CONFIG_BITS);
> >  	}
> >
> > +	if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> > +		/* set TX termination offset */
> > +		val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> > +		val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
> > +		val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
> > +		writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> > +	}
> > +
> >  	/* enable external reference clock */
> >  	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> > -	val |= BIT(16);
> > +	val &= ~PHY_REFCLK_USE_PAD;
> > +	val |= PHY_REFCLK_SSP_EN;
> >  	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
> >
> >  	/* wait for clock acquisition */
> > @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct
> platform_device *pdev)
> >  static const struct of_device_id qcom_pcie_match[] = {
> >  	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
> >  	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
> > +	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
> >  	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
> >  	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
> >  	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
> >
> 
> --
> regards,
> Stan

[PATCH v4 09/10] dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant

[Ansuel Smith]

Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset.
In ipq8064 phy_tx0_term_offset is 7. In ipq8064 v2 other SoC it's set to 0
by default.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pci/qcom,pcie.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 6efcef040741..02bc81bb8b2d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -5,6 +5,7 @@
 	Value type: <stringlist>
 	Definition: Value should contain
 			- "qcom,pcie-ipq8064" for ipq8064
+			- "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
 			- "qcom,pcie-apq8064" for apq8064
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
-- 
2.25.1

[PATCH v4 10/10] PCI: qcom: Add Force GEN1 support

[Ansuel Smith]

From: Sham Muthayyan <smuthayy@codeaurora.org>

Add Force GEN1 support needed in some ipq8064 board that needs to limit
some PCIe line to gen1 for some hardware limitation. This is set by the
max-link-speed binding and needed by some soc based on ipq8064. (for
example Netgear R7800 router)

Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index ab6f1bdd24c3..f6190c954e92 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 #define PCIE20_PARF_SYS_CTRL			0x00
@@ -99,6 +100,8 @@
 #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
 #define SLV_ADDR_SPACE_SZ			0x10000000
 
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2	0xa0
+
 #define DEVICE_TYPE_RC				0x4
 
 #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
@@ -195,6 +198,7 @@ struct qcom_pcie {
 	struct phy *phy;
 	struct gpio_desc *reset;
 	const struct qcom_pcie_ops *ops;
+	int gen;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
@@ -395,6 +399,11 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	/* wait for clock acquisition */
 	usleep_range(1000, 1500);
 
+	if (pcie->gen == 1) {
+		val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+		val |= 1;
+		writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+	}
 
 	/* Set the Max TLP size to 2K, instead of using default of 4K */
 	writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K,
@@ -1397,6 +1406,10 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
+	pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node);
+	if (pcie->gen < 0)
+		pcie->gen = 2;
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
 	pcie->parf = devm_ioremap_resource(dev, res);
 	if (IS_ERR(pcie->parf)) {
-- 
2.25.1

Re: [PATCH v4 10/10] PCI: qcom: Add Force GEN1 support

[Rob Herring]

On Thu, 14 May 2020 22:07:11 +0200, Ansuel Smith wrote:
> From: Sham Muthayyan <smuthayy@codeaurora.org>
> 
> Add Force GEN1 support needed in some ipq8064 board that needs to limit
> some PCIe line to gen1 for some hardware limitation. This is set by the
> max-link-speed binding and needed by some soc based on ipq8064. (for
> example Netgear R7800 router)
> 
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>