* [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes
@ 2020-05-10 6:03 Oleksij Rempel
2020-05-10 6:03 ` [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node Oleksij Rempel
2020-05-15 8:10 ` [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Thomas Bogendoerfer
0 siblings, 2 replies; 3+ messages in thread
From: Oleksij Rempel @ 2020-05-10 6:03 UTC (permalink / raw)
To: Rob Herring, Thomas Bogendoerfer
Cc: Oleksij Rempel, devicetree, linux-kernel, linux-mips,
Pengutronix Kernel Team
Fit led nodes to the latest naming schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 969d3384b0dd0..8be54465207a7 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -3,6 +3,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "ar9331.dtsi"
@@ -22,8 +23,9 @@ memory@0 {
leds {
compatible = "gpio-leds";
- system {
- label = "dpt-module:green:system";
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
};
--
2.26.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node
2020-05-10 6:03 [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Oleksij Rempel
@ 2020-05-10 6:03 ` Oleksij Rempel
2020-05-15 8:10 ` [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Thomas Bogendoerfer
1 sibling, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2020-05-10 6:03 UTC (permalink / raw)
To: Rob Herring, Thomas Bogendoerfer
Cc: Oleksij Rempel, devicetree, linux-kernel, linux-mips,
Pengutronix Kernel Team
schema violation was detected by the dtbs_check
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/ar9331.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 6e1e17cbc1ee0..9267bc9e4cc09 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -59,7 +59,7 @@ ddr_ctrl: memory-controller@18000000 {
#qca,ddr-wb-channel-cells = <1>;
};
- uart: uart@18020000 {
+ uart: serial@18020000 {
compatible = "qca,ar9330-uart";
reg = <0x18020000 0x14>;
--
2.26.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes
2020-05-10 6:03 [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Oleksij Rempel
2020-05-10 6:03 ` [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node Oleksij Rempel
@ 2020-05-15 8:10 ` Thomas Bogendoerfer
1 sibling, 0 replies; 3+ messages in thread
From: Thomas Bogendoerfer @ 2020-05-15 8:10 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Rob Herring, devicetree, linux-kernel, linux-mips,
Pengutronix Kernel Team
On Sun, May 10, 2020 at 08:03:23AM +0200, Oleksij Rempel wrote:
> Fit led nodes to the latest naming schema.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
both patches applied to mips-next.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-15 8:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-10 6:03 [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Oleksij Rempel
2020-05-10 6:03 ` [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node Oleksij Rempel
2020-05-15 8:10 ` [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Thomas Bogendoerfer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).