linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Syed Nayyar Waris <syednwaris@gmail.com>
Cc: akpm@linux-foundation.org, vilhelm.gray@gmail.com,
	linus.walleij@linaro.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases
Date: Fri, 15 May 2020 14:32:02 +0300	[thread overview]
Message-ID: <20200515113202.GO185537@smile.fi.intel.com> (raw)
In-Reply-To: <f4d924971feb15b0044eeefdd969b36747d2322b.1589497312.git.syednwaris@gmail.com>

On Fri, May 15, 2020 at 04:48:46AM +0530, Syed Nayyar Waris wrote:
> The introduction of the generic for_each_set_clump macro need test
> cases to verify the implementation. This patch adds test cases for
> scenarios in which clump sizes are 8 bits, 24 bits, 30 bits and 6 bits.
> The cases contain situations where clump is getting split at the word
> boundary and also when zeroes are present in the start and middle of
> bitmap.

Thanks for an update. Looks pretty much okay to me, though one nit below.
After addressing,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> ---
> Changes in v6:
>  - Make 'for loop' inside 'test_for_each_set_clump' more succinct.
> 
> Changes in v5:
>  - No change.
> 
> Changes in v4:
>  - Use 'for' loop in test function of 'for_each_set_clump'.
> 
> Changes in v3:
>  - No Change.
> 
> Changes in v2:
>  - Unify different tests for 'for_each_set_clump'. Pass test data as
>    function parameters.
>  - Remove unnecessary bitmap_zero calls.
> 
>  lib/test_bitmap.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 142 insertions(+)
> 
> diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
> index 6b13150667f5..673c512a5bbd 100644
> --- a/lib/test_bitmap.c
> +++ b/lib/test_bitmap.c
> @@ -155,6 +155,38 @@ static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
>  	return true;
>  }
>  
> +static bool __init __check_eq_clump(const char *srcfile, unsigned int line,
> +				    const unsigned int offset,
> +				    const unsigned int size,
> +				    const unsigned long *const clump_exp,
> +				    const unsigned long *const clump,
> +				    const unsigned long clump_size)
> +{
> +	unsigned long exp;
> +
> +	if (offset >= size) {
> +		pr_warn("[%s:%u] bit offset for clump out-of-bounds: expected less than %u, got %u\n",
> +			srcfile, line, size, offset);
> +		return false;
> +	}
> +
> +	exp = clump_exp[offset / clump_size];
> +	if (!exp) {
> +		pr_warn("[%s:%u] bit offset for zero clump: expected nonzero clump, got bit offset %u with clump value 0",
> +			srcfile, line, offset);
> +		return false;
> +	}
> +
> +	if (*clump != exp) {
> +		pr_warn("[%s:%u] expected clump value of 0x%lX, got clump value of 0x%lX",
> +			srcfile, line, exp, *clump);
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
> +
>  #define __expect_eq(suffix, ...)					\
>  	({								\
>  		int result = 0;						\
> @@ -172,6 +204,7 @@ static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
>  #define expect_eq_pbl(...)		__expect_eq(pbl, ##__VA_ARGS__)
>  #define expect_eq_u32_array(...)	__expect_eq(u32_array, ##__VA_ARGS__)
>  #define expect_eq_clump8(...)		__expect_eq(clump8, ##__VA_ARGS__)
> +#define expect_eq_clump(...)		__expect_eq(clump, ##__VA_ARGS__)
>  
>  static void __init test_zero_clear(void)
>  {
> @@ -577,6 +610,28 @@ static void noinline __init test_mem_optimisations(void)
>  	}
>  }
>  
> +static const unsigned long clump_bitmap_data[] __initconst = {
> +	0x38000201,
> +	0x05ff0f38,
> +	0xeffedcba,
> +	0xbbbbabcd,
> +	0x000000aa,
> +	0x000000aa,
> +	0x00ff0000,
> +	0xaaaaaa00,
> +	0xff000000,
> +	0x00aa0000,
> +	0x00000000,
> +	0x00000000,
> +	0x00000000,
> +	0x0f000000,
> +	0x00ff0000,
> +	0xaaaaaa00,
> +	0xff000000,
> +	0x00aa0000,
> +	0x00000ac0,
> +};
> +
>  static const unsigned char clump_exp[] __initconst = {
>  	0x01,	/* 1 bit set */
>  	0x02,	/* non-edge 1 bit set */
> @@ -588,6 +643,92 @@ static const unsigned char clump_exp[] __initconst = {
>  	0x05,	/* non-adjacent 2 bits set */
>  };
>  
> +static const unsigned long clump_exp1[] __initconst = {
> +	0x01,	/* 1 bit set */
> +	0x02,	/* non-edge 1 bit set */
> +	0x00,	/* zero bits set */
> +	0x38,	/* 3 bits set across 4-bit boundary */
> +	0x38,	/* Repeated clump */
> +	0x0F,	/* 4 bits set */
> +	0xFF,	/* all bits set */
> +	0x05,	/* non-adjacent 2 bits set */
> +};
> +
> +static const unsigned long clump_exp2[] __initconst = {
> +	0xfedcba,	/* 24 bits */
> +	0xabcdef,
> +	0xaabbbb,	/* Clump split between 2 words */
> +	0x000000,	/* zeroes in between */
> +	0x0000aa,
> +	0x000000,
> +	0x0000ff,
> +	0xaaaaaa,
> +	0x000000,
> +	0x0000ff,
> +};
> +
> +static const unsigned long clump_exp3[] __initconst = {
> +	0x00000000,	/* starting with 0s*/
> +	0x00000000,	/* All 0s */
> +	0x00000000,
> +	0x00000000,
> +	0x3f00000f,     /* Non zero set */
> +	0x2aa80003,
> +	0x00000aaa,
> +	0x00003fc0,
> +};
> +
> +static const unsigned long clump_exp4[] __initconst = {
> +	0x00,
> +	0x2b,
> +};
> +
> +struct clump_test_data {

> +	unsigned long data[256];

DECLARE_BITMAP() ?

> +	unsigned long count;
> +	unsigned long offset;
> +	unsigned long limit;
> +	unsigned long clump_size;
> +	unsigned long const *exp;

> +} clump_test_data[] = { {{0}, 2, 0, 64, 8, clump_exp1},
> +			{{0}, 8, 2, 240, 24, clump_exp2},
> +			{{0}, 8, 10, 240, 30, clump_exp3},
> +			{{0}, 1, 18, 18, 6, clump_exp4} };

Please, split structure definition and test data.

> +
> +static void __init prepare_test_data(unsigned int index)
> +{
> +	int i;
> +	unsigned long width = 0;
> +
> +	for(i = 0; i < clump_test_data[index].count; i++)
> +	{
> +		bitmap_set_value(clump_test_data[index].data,
> +			clump_bitmap_data[(clump_test_data[index].offset)++], width, 32);
> +		width += 32;
> +	}
> +}
> +
> +static void __init execute_for_each_set_clump_test(unsigned int index)
> +{
> +	unsigned long start, clump;
> +
> +	for_each_set_clump(start, clump, clump_test_data[index].data,
> +						clump_test_data[index].limit,
> +						clump_test_data[index].clump_size)
> +	expect_eq_clump(start, clump_test_data[index].limit, clump_test_data[index].exp,
> +						&clump, clump_test_data[index].clump_size);
> +}
> +
> +static void __init test_for_each_set_clump(void)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(clump_test_data); i++) {
> +		prepare_test_data(i);
> +		execute_for_each_set_clump_test(i);
> +	}
> +}
> +
>  static void __init test_for_each_set_clump8(void)
>  {
>  #define CLUMP_EXP_NUMBITS 64
> @@ -623,6 +764,7 @@ static void __init selftest(void)
>  	test_bitmap_parselist_user();
>  	test_mem_optimisations();
>  	test_for_each_set_clump8();
> +	test_for_each_set_clump();
>  }
>  
>  KSTM_MODULE_LOADERS(test_bitmap);
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko



  reply	other threads:[~2020-05-15 11:32 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 23:16 [PATCH v6 0/4] Introduce the for_each_set_clump macro Syed Nayyar Waris
2020-05-14 23:17 ` [PATCH v6 1/4] bitops: Introduce the " Syed Nayyar Waris
2020-05-15 11:29   ` Andy Shevchenko
2020-05-14 23:18 ` [PATCH v6 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases Syed Nayyar Waris
2020-05-15 11:32   ` Andy Shevchenko [this message]
2020-05-20 21:40     ` Syed Nayyar Waris
2020-05-21 10:11       ` Andy Shevchenko
2020-05-14 23:19 ` [PATCH v6 3/4] gpio: thunderx: Utilize for_each_set_clump macro Syed Nayyar Waris
2020-05-14 23:21 ` [PATCH v6 4/4] gpio: xilinx: " Syed Nayyar Waris
2020-05-15 11:32 ` [PATCH v6 0/4] Introduce the " Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515113202.GO185537@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syednwaris@gmail.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).