linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Syed Nayyar Waris <syednwaris@gmail.com>
To: akpm@linux-foundation.org
Cc: andriy.shevchenko@linux.intel.com, vilhelm.gray@gmail.com,
	linus.walleij@linaro.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases
Date: Fri, 15 May 2020 04:48:46 +0530	[thread overview]
Message-ID: <f4d924971feb15b0044eeefdd969b36747d2322b.1589497312.git.syednwaris@gmail.com> (raw)
In-Reply-To: <cover.1589497311.git.syednwaris@gmail.com>

The introduction of the generic for_each_set_clump macro need test
cases to verify the implementation. This patch adds test cases for
scenarios in which clump sizes are 8 bits, 24 bits, 30 bits and 6 bits.
The cases contain situations where clump is getting split at the word
boundary and also when zeroes are present in the start and middle of
bitmap.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
Changes in v6:
 - Make 'for loop' inside 'test_for_each_set_clump' more succinct.

Changes in v5:
 - No change.

Changes in v4:
 - Use 'for' loop in test function of 'for_each_set_clump'.

Changes in v3:
 - No Change.

Changes in v2:
 - Unify different tests for 'for_each_set_clump'. Pass test data as
   function parameters.
 - Remove unnecessary bitmap_zero calls.

 lib/test_bitmap.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 142 insertions(+)

diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index 6b13150667f5..673c512a5bbd 100644
--- a/lib/test_bitmap.c
+++ b/lib/test_bitmap.c
@@ -155,6 +155,38 @@ static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
 	return true;
 }
 
+static bool __init __check_eq_clump(const char *srcfile, unsigned int line,
+				    const unsigned int offset,
+				    const unsigned int size,
+				    const unsigned long *const clump_exp,
+				    const unsigned long *const clump,
+				    const unsigned long clump_size)
+{
+	unsigned long exp;
+
+	if (offset >= size) {
+		pr_warn("[%s:%u] bit offset for clump out-of-bounds: expected less than %u, got %u\n",
+			srcfile, line, size, offset);
+		return false;
+	}
+
+	exp = clump_exp[offset / clump_size];
+	if (!exp) {
+		pr_warn("[%s:%u] bit offset for zero clump: expected nonzero clump, got bit offset %u with clump value 0",
+			srcfile, line, offset);
+		return false;
+	}
+
+	if (*clump != exp) {
+		pr_warn("[%s:%u] expected clump value of 0x%lX, got clump value of 0x%lX",
+			srcfile, line, exp, *clump);
+		return false;
+	}
+
+	return true;
+}
+
+
 #define __expect_eq(suffix, ...)					\
 	({								\
 		int result = 0;						\
@@ -172,6 +204,7 @@ static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
 #define expect_eq_pbl(...)		__expect_eq(pbl, ##__VA_ARGS__)
 #define expect_eq_u32_array(...)	__expect_eq(u32_array, ##__VA_ARGS__)
 #define expect_eq_clump8(...)		__expect_eq(clump8, ##__VA_ARGS__)
+#define expect_eq_clump(...)		__expect_eq(clump, ##__VA_ARGS__)
 
 static void __init test_zero_clear(void)
 {
@@ -577,6 +610,28 @@ static void noinline __init test_mem_optimisations(void)
 	}
 }
 
+static const unsigned long clump_bitmap_data[] __initconst = {
+	0x38000201,
+	0x05ff0f38,
+	0xeffedcba,
+	0xbbbbabcd,
+	0x000000aa,
+	0x000000aa,
+	0x00ff0000,
+	0xaaaaaa00,
+	0xff000000,
+	0x00aa0000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x0f000000,
+	0x00ff0000,
+	0xaaaaaa00,
+	0xff000000,
+	0x00aa0000,
+	0x00000ac0,
+};
+
 static const unsigned char clump_exp[] __initconst = {
 	0x01,	/* 1 bit set */
 	0x02,	/* non-edge 1 bit set */
@@ -588,6 +643,92 @@ static const unsigned char clump_exp[] __initconst = {
 	0x05,	/* non-adjacent 2 bits set */
 };
 
+static const unsigned long clump_exp1[] __initconst = {
+	0x01,	/* 1 bit set */
+	0x02,	/* non-edge 1 bit set */
+	0x00,	/* zero bits set */
+	0x38,	/* 3 bits set across 4-bit boundary */
+	0x38,	/* Repeated clump */
+	0x0F,	/* 4 bits set */
+	0xFF,	/* all bits set */
+	0x05,	/* non-adjacent 2 bits set */
+};
+
+static const unsigned long clump_exp2[] __initconst = {
+	0xfedcba,	/* 24 bits */
+	0xabcdef,
+	0xaabbbb,	/* Clump split between 2 words */
+	0x000000,	/* zeroes in between */
+	0x0000aa,
+	0x000000,
+	0x0000ff,
+	0xaaaaaa,
+	0x000000,
+	0x0000ff,
+};
+
+static const unsigned long clump_exp3[] __initconst = {
+	0x00000000,	/* starting with 0s*/
+	0x00000000,	/* All 0s */
+	0x00000000,
+	0x00000000,
+	0x3f00000f,     /* Non zero set */
+	0x2aa80003,
+	0x00000aaa,
+	0x00003fc0,
+};
+
+static const unsigned long clump_exp4[] __initconst = {
+	0x00,
+	0x2b,
+};
+
+struct clump_test_data {
+	unsigned long data[256];
+	unsigned long count;
+	unsigned long offset;
+	unsigned long limit;
+	unsigned long clump_size;
+	unsigned long const *exp;
+} clump_test_data[] = { {{0}, 2, 0, 64, 8, clump_exp1},
+			{{0}, 8, 2, 240, 24, clump_exp2},
+			{{0}, 8, 10, 240, 30, clump_exp3},
+			{{0}, 1, 18, 18, 6, clump_exp4} };
+
+static void __init prepare_test_data(unsigned int index)
+{
+	int i;
+	unsigned long width = 0;
+
+	for(i = 0; i < clump_test_data[index].count; i++)
+	{
+		bitmap_set_value(clump_test_data[index].data,
+			clump_bitmap_data[(clump_test_data[index].offset)++], width, 32);
+		width += 32;
+	}
+}
+
+static void __init execute_for_each_set_clump_test(unsigned int index)
+{
+	unsigned long start, clump;
+
+	for_each_set_clump(start, clump, clump_test_data[index].data,
+						clump_test_data[index].limit,
+						clump_test_data[index].clump_size)
+	expect_eq_clump(start, clump_test_data[index].limit, clump_test_data[index].exp,
+						&clump, clump_test_data[index].clump_size);
+}
+
+static void __init test_for_each_set_clump(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(clump_test_data); i++) {
+		prepare_test_data(i);
+		execute_for_each_set_clump_test(i);
+	}
+}
+
 static void __init test_for_each_set_clump8(void)
 {
 #define CLUMP_EXP_NUMBITS 64
@@ -623,6 +764,7 @@ static void __init selftest(void)
 	test_bitmap_parselist_user();
 	test_mem_optimisations();
 	test_for_each_set_clump8();
+	test_for_each_set_clump();
 }
 
 KSTM_MODULE_LOADERS(test_bitmap);
-- 
2.26.2


  parent reply	other threads:[~2020-05-14 23:19 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 23:16 [PATCH v6 0/4] Introduce the for_each_set_clump macro Syed Nayyar Waris
2020-05-14 23:17 ` [PATCH v6 1/4] bitops: Introduce the " Syed Nayyar Waris
2020-05-15 11:29   ` Andy Shevchenko
2020-05-14 23:18 ` Syed Nayyar Waris [this message]
2020-05-15 11:32   ` [PATCH v6 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases Andy Shevchenko
2020-05-20 21:40     ` Syed Nayyar Waris
2020-05-21 10:11       ` Andy Shevchenko
2020-05-14 23:19 ` [PATCH v6 3/4] gpio: thunderx: Utilize for_each_set_clump macro Syed Nayyar Waris
2020-05-14 23:21 ` [PATCH v6 4/4] gpio: xilinx: " Syed Nayyar Waris
2020-05-15 11:32 ` [PATCH v6 0/4] Introduce the " Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f4d924971feb15b0044eeefdd969b36747d2322b.1589497312.git.syednwaris@gmail.com \
    --to=syednwaris@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).