Re: [PATCH v2 5/8] iio: stm32-adc: pass iio device as arg for the interrupt handler

[Jonathan Cameron <jic23@kernel.org>]

On Thu, 14 May 2020 16:17:07 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> This changes the argument for the interrupt handler to be the IIO device
> instead of the state-struct.
> Since there will be some changes to how iio_priv_to_dev() is implemented,
> it could be that the helper becomes a bit slower, as it will be hidden away
> in the IIO core.
> 
> The iio_priv() call will still be fast enough, as it will return a void
> pointer from the public IIO device structure. So it's better to switch the
> order.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
As with previous patch - looks good to me, but I'd like an stm32
Ack / review.

thanks,

Jonathan

> ---
>  drivers/iio/adc/stm32-adc.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 80c3f963527b..34885387fbdb 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -1227,8 +1227,8 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
>  
>  static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
>  {
> -	struct stm32_adc *adc = data;
> -	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +	struct iio_dev *indio_dev = data;
> +	struct stm32_adc *adc = iio_priv(indio_dev);
>  	const struct stm32_adc_regspec *regs = adc->cfg->regs;
>  	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
>  
> @@ -1240,8 +1240,8 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
>  
>  static irqreturn_t stm32_adc_isr(int irq, void *data)
>  {
> -	struct stm32_adc *adc = data;
> -	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
> +	struct iio_dev *indio_dev = data;
> +	struct stm32_adc *adc = iio_priv(indio_dev);
>  	const struct stm32_adc_regspec *regs = adc->cfg->regs;
>  	u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
>  
> @@ -1882,7 +1882,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  
>  	ret = devm_request_threaded_irq(&pdev->dev, adc->irq, stm32_adc_isr,
>  					stm32_adc_threaded_isr,
> -					0, pdev->name, adc);
> +					0, pdev->name, indio_dev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to request IRQ\n");
>  		return ret;