From: Dan Murphy <dmurphy@ti.com>
To: <andrew@lunn.ch>, <f.fainelli@gmail.com>, <hkallweit1@gmail.com>,
<davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next v2 3/4] dt-bindings: net: Add RGMII internal delay for DP83869
Date: Wed, 20 May 2020 07:18:34 -0500 [thread overview]
Message-ID: <20200520121835.31190-4-dmurphy@ti.com> (raw)
In-Reply-To: <20200520121835.31190-1-dmurphy@ti.com>
Add the internal delay values into the header and update the binding
with the internal delay properties.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/net/ti,dp83869.yaml | 16 ++++++++++++++++
include/dt-bindings/net/ti-dp83869.h | 18 ++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index 5b69ef03bbf7..344015ab9081 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -64,6 +64,20 @@ properties:
Operational mode for the PHY. If this is not set then the operational
mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
+ ti,rx-internal-delay:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83869.h
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
+
+ ti,tx-internal-delay:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83869.h
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID.
+
required:
- reg
@@ -80,5 +94,7 @@ examples:
ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
ti,max-output-impedance = "true";
ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+ ti,rx-internal-delay = <DP83869_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83869_RGMIIDCTL_2_75_NS>;
};
};
diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h
index 218b1a64e975..77d104a40f1f 100644
--- a/include/dt-bindings/net/ti-dp83869.h
+++ b/include/dt-bindings/net/ti-dp83869.h
@@ -16,6 +16,24 @@
#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB 0x02
#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB 0x03
+/* RGMIIDCTL internal delay for rx and tx */
+#define DP83869_RGMIIDCTL_250_PS 0x0
+#define DP83869_RGMIIDCTL_500_PS 0x1
+#define DP83869_RGMIIDCTL_750_PS 0x2
+#define DP83869_RGMIIDCTL_1_NS 0x3
+#define DP83869_RGMIIDCTL_1_25_NS 0x4
+#define DP83869_RGMIIDCTL_1_50_NS 0x5
+#define DP83869_RGMIIDCTL_1_75_NS 0x6
+#define DP83869_RGMIIDCTL_2_00_NS 0x7
+#define DP83869_RGMIIDCTL_2_25_NS 0x8
+#define DP83869_RGMIIDCTL_2_50_NS 0x9
+#define DP83869_RGMIIDCTL_2_75_NS 0xa
+#define DP83869_RGMIIDCTL_3_00_NS 0xb
+#define DP83869_RGMIIDCTL_3_25_NS 0xc
+#define DP83869_RGMIIDCTL_3_50_NS 0xd
+#define DP83869_RGMIIDCTL_3_75_NS 0xe
+#define DP83869_RGMIIDCTL_4_00_NS 0xf
+
/* IO_MUX_CFG - Clock output selection */
#define DP83869_CLK_O_SEL_CHN_A_RCLK 0x0
#define DP83869_CLK_O_SEL_CHN_B_RCLK 0x1
--
2.26.2
next prev parent reply other threads:[~2020-05-20 12:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 12:18 [PATCH net-next v2 0/4] DP83869 Enhancements Dan Murphy
2020-05-20 12:18 ` [PATCH net-next v2 1/4] net: phy: dp83869: Update port-mirroring to read straps Dan Murphy
2020-05-20 12:18 ` [PATCH net-next v2 2/4] net: phy: dp83869: Set opmode from straps Dan Murphy
2020-05-20 15:49 ` Florian Fainelli
2020-05-20 12:18 ` Dan Murphy [this message]
2020-05-20 13:56 ` [PATCH net-next v2 3/4] dt-bindings: net: Add RGMII internal delay for DP83869 Andrew Lunn
2020-05-20 15:28 ` Dan Murphy
2020-05-20 15:30 ` Dan Murphy
2020-05-20 15:36 ` Andrew Lunn
2020-05-20 15:56 ` Dan Murphy
2020-05-20 16:03 ` Florian Fainelli
2020-05-20 16:43 ` Andrew Lunn
2020-05-20 17:20 ` Dan Murphy
2020-05-20 17:45 ` Florian Fainelli
2020-05-20 17:52 ` Dan Murphy
2020-05-20 19:27 ` Andrew Lunn
2020-05-20 20:02 ` Dan Murphy
2020-05-20 20:44 ` Andrew Lunn
2020-05-20 20:55 ` Dan Murphy
2020-05-20 12:18 ` [PATCH net-next v2 4/4] net: dp83869: Add RGMII internal delay configuration Dan Murphy
2020-05-22 12:25 [PATCH net-next v2 0/4] RGMII Internal delay common property Dan Murphy
2020-05-22 12:25 ` [PATCH net-next v2 3/4] dt-bindings: net: Add RGMII internal delay for DP83869 Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200520121835.31190-4-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).