* [GIT PULL] PHY: For 5.8
@ 2020-05-21 15:02 Kishon Vijay Abraham I
2020-05-22 8:36 ` Greg Kroah-Hartman
0 siblings, 1 reply; 2+ messages in thread
From: Kishon Vijay Abraham I @ 2020-05-21 15:02 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Greg Kroah-Hartman; +Cc: linux-kernel, Vinod Koul
Hi Greg,
Please find the pull request for 5.8 merge window below.
It adds four new PHY drivers for the various Cadence, Intel and
Qualcomm's PHYs. It adds support for Qualcomm's SM8250 UFS PHY
and SM8150 QMP USB3 PHY, Amlogic's USB2 PHY on Meson8m2 in existing
PHY drivers.
It also adds fixes to get USB working reliably in the various Broadcom,
Samsung, Amlogic and Cadence PHYs and converts bunch of device tree
binding documents to schema YAML format.
Please see the tag message below for the detailed list of changes and
let me know if I have to change something.
Thanks
Kishon
The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:
Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git tags/phy-for-5.8
for you to fetch changes up to ac0a95a3ea7811f5cc4489924ddb54f0ea0f3007:
phy: intel: Add driver support for ComboPhy (2020-05-19 20:26:06 +0530)
----------------------------------------------------------------
phy: for 5.8
*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
phy-bcm-sr-usb, phy-brcm-usb PHY driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----------------------------------------------------------------
Bharat Gooty (1):
drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
Bjorn Andersson (2):
phy: qcom: qmp: Add SM8250 UFS PHY
phy: qcom-qmp: Ensure register indirection arrays initialized
Christophe JAILLET (1):
phy: cpcap-usb: Remove some useless code
Dilip Kota (3):
dt-bindings: phy: Add PHY_TYPE_XPCS definition
dt-bindings: phy: Add YAML schemas for Intel ComboPhy
phy: intel: Add driver support for ComboPhy
Geert Uytterhoeven (1):
phy: intel-lgm-emmc: Add architecture dependency
Jack Pham (1):
phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
Jonathan Bakker (1):
phy: samsung: s5pv210-usb2: Add delay after reset
Jyri Sarha (1):
phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver
Martin Blumenstingl (6):
dt-bindings: phy: meson8b-usb2: Convert to json-schema
dt-bindings: phy: meson8b-usb2: Add compatible string for Meson8m2
phy: amlogic: meson8b-usb2: Use a MMIO regmap
phy: amlogic: meson8b-usb2: Don't set REG_ADP_BC_ACA_ENABLE on Meson8
phy: amlogic: meson8b-usb2: unset the IDDQ bit during PHY power-on
phy: amlogic: meson8b-usb2: Add a compatible string for Meson8m2
Peter Chen (3):
doc: dt-binding: cdns-salvo-phy: add binding doc
phy: cadence: salvo: add salvo phy driver
phy: phy-cadence-salvo: add phy .init API
Rikard Falkeborn (3):
phy: sr-usb: Constify phy_ops
phy: phy-brcm-usb: Constify static structs
phy: phy-bcm-ns2-usbdrd: Constify phy_ops
Robert Marko (2):
phy: add driver for Qualcomm IPQ40xx USB PHY
dt-bindings: phy-qcom-ipq4019-usb: add binding document
Roger Quadros (3):
phy: omap-usb2: Clean up exported header
phy: ti: am654: show up in regmap debugfs
phy: ti: am654: add support for USB super-speed
Sandeep Maheswaram (4):
dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
Sanket Parmar (1):
phy: cadence: sierra: Fix for USB3 U1/U2 state
Wei Yongjun (1):
phy: ti: j721e-wiz: Fix some error return code in wiz_probe()
Wesley Cheng (5):
dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2
phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
phy: qcom-qmp: Rename UFS PCS QMP v4 registers
dt-bindings: phy: usb-snps-femto-v2: Add regulator entries to example
Yoshihiro Shimoda (4):
dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml | 64 ++++++++++
Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml | 52 +++++++++
Documentation/devicetree/bindings/phy/intel,combo-phy.yaml | 101 ++++++++++++++++
Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 28 -----
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 313 +++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 136 ++++++++++++++++++++++
Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml | 80 +++++++++++++
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 242 --------------------------------------
Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml | 50 ++++++++
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -----------
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------
Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 117 +++++++++++++++++++
Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 79 +++++++++++++
drivers/phy/amlogic/Kconfig | 3 +-
drivers/phy/amlogic/phy-meson8b-usb2.c | 149 ++++++++++++++++--------
drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 2 +-
drivers/phy/broadcom/phy-bcm-sr-usb.c | 57 +--------
drivers/phy/broadcom/phy-brcm-usb.c | 16 +--
drivers/phy/cadence/Kconfig | 9 ++
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/phy-cadence-salvo.c | 325 +++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/cadence/phy-cadence-sierra.c | 27 ++---
drivers/phy/intel/Kconfig | 15 +++
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-combo.c | 632 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/motorola/phy-cpcap-usb.c | 2 -
drivers/phy/qualcomm/Kconfig | 17 +++
drivers/phy/qualcomm/Makefile | 2 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 +++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.c | 254 ++++++++++++++++++++++++++++++++++++----
drivers/phy/qualcomm/phy-qcom-qmp.h | 238 +++++++++++++++++++++++++++++++++----
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 287 +++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/samsung/phy-s5pv210-usb2.c | 4 +
drivers/phy/ti/phy-am654-serdes.c | 104 ++++++++++++++++-
drivers/phy/ti/phy-j721e-wiz.c | 65 ++++++++++-
drivers/phy/ti/phy-omap-usb2.c | 60 +++++++++-
include/dt-bindings/phy/phy.h | 1 +
include/linux/phy/omap_usb.h | 69 +----------
38 files changed, 3228 insertions(+), 644 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
create mode 100644 drivers/phy/cadence/phy-cadence-salvo.c
create mode 100644 drivers/phy/intel/phy-intel-combo.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] PHY: For 5.8
2020-05-21 15:02 [GIT PULL] PHY: For 5.8 Kishon Vijay Abraham I
@ 2020-05-22 8:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 2+ messages in thread
From: Greg Kroah-Hartman @ 2020-05-22 8:36 UTC (permalink / raw)
To: Kishon Vijay Abraham I; +Cc: linux-kernel, Vinod Koul
On Thu, May 21, 2020 at 08:32:09PM +0530, Kishon Vijay Abraham I wrote:
> Hi Greg,
>
> Please find the pull request for 5.8 merge window below.
>
> It adds four new PHY drivers for the various Cadence, Intel and
> Qualcomm's PHYs. It adds support for Qualcomm's SM8250 UFS PHY
> and SM8150 QMP USB3 PHY, Amlogic's USB2 PHY on Meson8m2 in existing
> PHY drivers.
>
> It also adds fixes to get USB working reliably in the various Broadcom,
> Samsung, Amlogic and Cadence PHYs and converts bunch of device tree
> binding documents to schema YAML format.
>
> Please see the tag message below for the detailed list of changes and
> let me know if I have to change something.
>
> Thanks
> Kishon
>
> The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:
>
> Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git tags/phy-for-5.8
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-22 8:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-21 15:02 [GIT PULL] PHY: For 5.8 Kishon Vijay Abraham I
2020-05-22 8:36 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).