Add support for the X1830 and fix bugs for X1000 v10.

Add support for the X1830 and fix bugs for X1000 v10.

[周琰杰 (Zhou Yanjie)]

v9->v10:
1.Add missing "X1830_CLK_TCU".
2.Fix bugs in "X1830_CLK_OTGPHY".

[PATCH v10 0/6] Add support for the X1830 and fix bugs for X1000.

[周琰杰 (Zhou Yanjie)]

v9->v10:
1.Add missing "X1830_CLK_TCU".
2.Fix bugs in "X1830_CLK_OTGPHY".

周琰杰 (Zhou Yanjie) (6):
  clk: Ingenic: Remove unnecessary spinlock when reading registers.
  clk: Ingenic: Adjust cgu code to make it compatible with X1830.
  dt-bindings: clock: Add X1830 bindings.
  clk: Ingenic: Add CGU driver for X1830.
  dt-bindings: clock: Add and reorder ABI for X1000.
  clk: X1000: Add FIXDIV for SSI clock of X1000.

 .../devicetree/bindings/clock/ingenic,cgu.yaml     |   2 +
 drivers/clk/ingenic/Kconfig                        |  10 +
 drivers/clk/ingenic/Makefile                       |   1 +
 drivers/clk/ingenic/cgu.c                          |  28 +-
 drivers/clk/ingenic/cgu.h                          |   4 +
 drivers/clk/ingenic/jz4725b-cgu.c                  |   4 +
 drivers/clk/ingenic/jz4740-cgu.c                   |   4 +
 drivers/clk/ingenic/jz4770-cgu.c                   |   8 +-
 drivers/clk/ingenic/jz4780-cgu.c                   |   3 +
 drivers/clk/ingenic/x1000-cgu.c                    | 116 +++++-
 drivers/clk/ingenic/x1830-cgu.c                    | 443 +++++++++++++++++++++
 include/dt-bindings/clock/x1000-cgu.h              |  64 +--
 include/dt-bindings/clock/x1830-cgu.h              |  55 +++
 13 files changed, 694 insertions(+), 48 deletions(-)
 create mode 100644 drivers/clk/ingenic/x1830-cgu.c
 create mode 100644 include/dt-bindings/clock/x1830-cgu.h

-- 
2.11.0

[PATCH v10 1/6] clk: Ingenic: Remove unnecessary spinlock when reading registers.

[周琰杰 (Zhou Yanjie)]

It is not necessary to use spinlock when reading registers,
so remove it from cgu.c.

Suggested-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2:
    New patch.
    
    v2->v3:
    Adjust order from [5/5] in v2 to [1/5] in v3.
    
    v3->v4:
    Remove the spinlock around ingenic_cgu_gate_get().
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.
    
    v5->v6:
    No change.
    
    v6->v7:
    No change.
    
    v7->v8:
    No change.
    
    v8->v9:
    No change.
    
    v9->v10:
    No change.

 drivers/clk/ingenic/cgu.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 6e963031cd87..ab1302ad1450 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -76,16 +76,13 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	const struct ingenic_cgu_pll_info *pll_info;
 	unsigned m, n, od_enc, od;
 	bool bypass;
-	unsigned long flags;
 	u32 ctl;
 
 	clk_info = &cgu->clock_info[ingenic_clk->idx];
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 	pll_info = &clk_info->pll;
 
-	spin_lock_irqsave(&cgu->lock, flags);
 	ctl = readl(cgu->base + pll_info->reg);
-	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
 	m += pll_info->m_offset;
@@ -259,12 +256,9 @@ static int ingenic_pll_is_enabled(struct clk_hw *hw)
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
 	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
 	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
-	unsigned long flags;
 	u32 ctl;
 
-	spin_lock_irqsave(&cgu->lock, flags);
 	ctl = readl(cgu->base + pll_info->reg);
-	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return !!(ctl & BIT(pll_info->enable_bit));
 }
@@ -562,16 +556,12 @@ static int ingenic_clk_is_enabled(struct clk_hw *hw)
 	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
 	const struct ingenic_cgu_clk_info *clk_info;
-	unsigned long flags;
 	int enabled = 1;
 
 	clk_info = &cgu->clock_info[ingenic_clk->idx];
 
-	if (clk_info->type & CGU_CLK_GATE) {
-		spin_lock_irqsave(&cgu->lock, flags);
+	if (clk_info->type & CGU_CLK_GATE)
 		enabled = !ingenic_cgu_gate_get(cgu, &clk_info->gate);
-		spin_unlock_irqrestore(&cgu->lock, flags);
-	}
 
 	return enabled;
 }
-- 
2.11.0

[PATCH v10 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830.

[周琰杰 (Zhou Yanjie)]

The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, a new
"bypass_reg" was introduced. In addition, when calculating
rate, the PLL of X1830 introduced an extra 2x multiplier,
so a new "rate_multiplier" was introduced. And adjust the
code in jz47xx-cgu.c and x1000-cgu.c, make it to be
compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2->v3:
    Adjust order from [1/5] in v2 to [2/5] in v3.
    
    v3->v4:
    Merge [3/5] in v3 into this patch.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.
    
    v5->v6:
    Revert "pll_reg" to "reg" to minimize patch as Paul Cercueil's suggest.
    
    v6->v7:
    Update commit message.
    
    v7->v8:
    No change.
    
    v8->v9:
    No change.
    
    v9->v10:
    No change.

 drivers/clk/ingenic/cgu.c         | 16 +++++++++++++---
 drivers/clk/ingenic/cgu.h         |  4 ++++
 drivers/clk/ingenic/jz4725b-cgu.c |  4 ++++
 drivers/clk/ingenic/jz4740-cgu.c  |  4 ++++
 drivers/clk/ingenic/jz4770-cgu.c  |  8 +++++++-
 drivers/clk/ingenic/jz4780-cgu.c  |  3 +++
 drivers/clk/ingenic/x1000-cgu.c   |  6 ++++++
 7 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab1302ad1450..d7981b670221 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -90,6 +90,9 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+	ctl = readl(cgu->base + pll_info->bypass_reg);
+
 	bypass = !pll_info->no_bypass_bit &&
 		 !!(ctl & BIT(pll_info->bypass_bit));
 
@@ -103,7 +106,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static unsigned long
@@ -136,7 +140,8 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -209,9 +214,14 @@ static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->bypass_reg);
 
 	ctl &= ~BIT(pll_info->bypass_bit);
+
+	writel(ctl, cgu->base + pll_info->bypass_reg);
+
+	ctl = readl(cgu->base + pll_info->reg);
+
 	ctl |= BIT(pll_info->enable_bit);
 
 	writel(ctl, cgu->base + pll_info->reg);
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004079ee..2c75ef4a36f5 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -17,6 +17,7 @@
 /**
  * struct ingenic_cgu_pll_info - information about a PLL
  * @reg: the offset of the PLL's control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
  * @m_shift: the number of bits to shift the multiplier value by (ie. the
  *           index of the lowest bit of the multiplier value in the PLL's
  *           control register)
@@ -37,6 +38,7 @@
  * @od_encoding: a pointer to an array mapping post-VCO divider values to
  *               their encoded values in the PLL control register, or -1 for
  *               unsupported values
+ * @bypass_reg: the offset of the bypass control register within the CGU
  * @bypass_bit: the index of the bypass bit in the PLL control register
  * @enable_bit: the index of the enable bit in the PLL control register
  * @stable_bit: the index of the stable bit in the PLL control register
@@ -44,10 +46,12 @@
  */
 struct ingenic_cgu_pll_info {
 	unsigned reg;
+	unsigned rate_multiplier;
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
 	u8 od_shift, od_bits, od_max;
+	unsigned bypass_reg;
 	u8 bypass_bit;
 	u8 enable_bit;
 	u8 stable_bit;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635f6278..8c38e72d14a7 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -9,7 +9,9 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4725b-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -54,6 +56,7 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
@@ -65,6 +68,7 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 			.od_max = 4,
 			.od_encoding = pll_od_encoding,
 			.stable_bit = 10,
+			.bypass_reg = CGU_REG_CPPCR,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 		},
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c877d6..c0ac9196a581 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -10,7 +10,9 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4740-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -69,6 +71,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
@@ -80,6 +83,7 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 			.od_max = 4,
 			.od_encoding = pll_od_encoding,
 			.stable_bit = 10,
+			.bypass_reg = CGU_REG_CPPCR,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 		},
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index c051ecba5cf8..9ea4490ecb7f 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -9,7 +9,9 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4770-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -102,6 +104,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
 			.reg = CGU_REG_CPPCR0,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -112,6 +115,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR0,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 			.stable_bit = 10,
@@ -124,6 +128,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
 			.reg = CGU_REG_CPPCR1,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -134,9 +139,10 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR1,
+			.no_bypass_bit = true,
 			.enable_bit = 7,
 			.stable_bit = 6,
-			.no_bypass_bit = true,
 		},
 	},
 
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index c758f1643067..6c5b8029cc8a 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 
 #include <dt-bindings/clock/jz4780-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -266,6 +267,7 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 
 #define DEF_PLL(name) { \
 	.reg = CGU_REG_ ## name, \
+	.rate_multiplier = 1, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
@@ -277,6 +279,7 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	.od_max = 16, \
 	.od_encoding = pll_od_encoding, \
 	.stable_bit = 6, \
+	.bypass_reg = CGU_REG_ ## name, \
 	.bypass_bit = 1, \
 	.enable_bit = 0, \
 }
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b3f555..c33934d8ac14 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -7,7 +7,9 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/x1000-cgu.h>
+
 #include "cgu.h"
 #include "pm.h"
 
@@ -58,6 +60,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_APLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -68,6 +71,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_APLL,
 			.bypass_bit = 9,
 			.enable_bit = 8,
 			.stable_bit = 10,
@@ -79,6 +83,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
 			.reg = CGU_REG_MPLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -89,6 +94,7 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 			.od_bits = 2,
 			.od_max = 8,
 			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_MPLL,
 			.bypass_bit = 6,
 			.enable_bit = 7,
 			.stable_bit = 0,
-- 
2.11.0

[PATCH v10 3/6] dt-bindings: clock: Add X1830 bindings.

[周琰杰 (Zhou Yanjie)]

Add the clock bindings for the X1830 Soc from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    v2->v3:
    Adjust order from [3/5] in v2 to [4/5] in v3.
    
    v3->v4:
    Adjust order from [4/5] in v3 to [3/4] in v4.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.
    
    v5->v6:
    Add missing part of X1830's CGU.
    
    v6->v7:
    No change.
    
    v7->v8:
    Rebase on top of linux-next.
    
    v8->v9:
    No change.
    
    v9->v10:
    Add missing "X1830_CLK_TCU".

 .../devicetree/bindings/clock/ingenic,cgu.yaml     |  2 +
 include/dt-bindings/clock/x1830-cgu.h              | 55 ++++++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 include/dt-bindings/clock/x1830-cgu.h

diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 0281cd1d7e1b..a952d5811823 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -25,6 +25,7 @@ select:
           - ingenic,jz4770-cgu
           - ingenic,jz4780-cgu
           - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
   required:
     - compatible
 
@@ -51,6 +52,7 @@ properties:
         - ingenic,jz4770-cgu
         - ingenic,jz4780-cgu
         - ingenic,x1000-cgu
+        - ingenic,x1830-cgu
       - const: simple-mfd
     minItems: 1
 
diff --git a/include/dt-bindings/clock/x1830-cgu.h b/include/dt-bindings/clock/x1830-cgu.h
new file mode 100644
index 000000000000..801e1d09c881
--- /dev/null
+++ b/include/dt-bindings/clock/x1830-cgu.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,x1830-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ *   - external clocks
+ *   - PLLs
+ *   - muxes/dividers in the order they appear in the x1830 programmers manual
+ *   - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_X1830_CGU_H__
+#define __DT_BINDINGS_CLOCK_X1830_CGU_H__
+
+#define X1830_CLK_EXCLK			0
+#define X1830_CLK_RTCLK			1
+#define X1830_CLK_APLL			2
+#define X1830_CLK_MPLL			3
+#define X1830_CLK_EPLL			4
+#define X1830_CLK_VPLL			5
+#define X1830_CLK_OTGPHY		6
+#define X1830_CLK_SCLKA			7
+#define X1830_CLK_CPUMUX		8
+#define X1830_CLK_CPU			9
+#define X1830_CLK_L2CACHE		10
+#define X1830_CLK_AHB0			11
+#define X1830_CLK_AHB2PMUX		12
+#define X1830_CLK_AHB2			13
+#define X1830_CLK_PCLK			14
+#define X1830_CLK_DDR			15
+#define X1830_CLK_MAC			16
+#define X1830_CLK_LCD			17
+#define X1830_CLK_MSCMUX		18
+#define X1830_CLK_MSC0			19
+#define X1830_CLK_MSC1			20
+#define X1830_CLK_SSIPLL		21
+#define X1830_CLK_SSIPLL_DIV2	22
+#define X1830_CLK_SSIMUX		23
+#define X1830_CLK_EMC			24
+#define X1830_CLK_EFUSE			25
+#define X1830_CLK_OTG			26
+#define X1830_CLK_SSI0			27
+#define X1830_CLK_SMB0			28
+#define X1830_CLK_SMB1			29
+#define X1830_CLK_SMB2			30
+#define X1830_CLK_UART0			31
+#define X1830_CLK_UART1			32
+#define X1830_CLK_SSI1			33
+#define X1830_CLK_SFC			34
+#define X1830_CLK_PDMA			35
+#define X1830_CLK_TCU			36
+#define X1830_CLK_DTRNG			37
+#define X1830_CLK_OST			38
+
+#endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */
-- 
2.11.0

Re: [PATCH v10 3/6] dt-bindings: clock: Add X1830 bindings.

[Rob Herring]

On Tue, 26 May 2020 22:40:41 +0800, 周琰杰 (Zhou Yanjie) wrote:
> Add the clock bindings for the X1830 Soc from Ingenic.
> 
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> 
> Notes:
>     v2->v3:
>     Adjust order from [3/5] in v2 to [4/5] in v3.
> 
>     v3->v4:
>     Adjust order from [4/5] in v3 to [3/4] in v4.
> 
>     v4->v5:
>     Rebase on top of kernel 5.6-rc1.
> 
>     v5->v6:
>     Add missing part of X1830's CGU.
> 
>     v6->v7:
>     No change.
> 
>     v7->v8:
>     Rebase on top of linux-next.
> 
>     v8->v9:
>     No change.
> 
>     v9->v10:
>     Add missing "X1830_CLK_TCU".
> 
>  .../devicetree/bindings/clock/ingenic,cgu.yaml     |  2 +
>  include/dt-bindings/clock/x1830-cgu.h              | 55 ++++++++++++++++++++++
>  2 files changed, 57 insertions(+)
>  create mode 100644 include/dt-bindings/clock/x1830-cgu.h
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v10 3/6] dt-bindings: clock: Add X1830 bindings.

[Zhou Yanjie]

Hi Stephen,

在 2020/5/27 下午4:12, Stephen Boyd 写道:
> Quoting 周琰杰 (Zhou Yanjie) (2020-05-26 07:40:41)
>> Add the clock bindings for the X1830 Soc from Ingenic.
>>
>> Signed-off-by: \u5468\u7430\u6770 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>
>> Notes:
>>      v2->v3:
>>      Adjust order from [3/5] in v2 to [4/5] in v3.
>>      
>>      v3->v4:
>>      Adjust order from [4/5] in v3 to [3/4] in v4.
>>      
>>      v4->v5:
>>      Rebase on top of kernel 5.6-rc1.
>>      
>>      v5->v6:
>>      Add missing part of X1830's CGU.
>>      
>>      v6->v7:
>>      No change.
>>      
>>      v7->v8:
>>      Rebase on top of linux-next.
>>      
>>      v8->v9:
>>      No change.
>>      
>>      v9->v10:
>>      Add missing "X1830_CLK_TCU".
>>
>>   .../devicetree/bindings/clock/ingenic,cgu.yaml     |  2 +
>>   include/dt-bindings/clock/x1830-cgu.h              | 55 ++++++++++++++++++++++
>>   2 files changed, 57 insertions(+)
>>   create mode 100644 include/dt-bindings/clock/x1830-cgu.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
> This file is in Rob's DT tree staged for the next release, not in the
> clk tree. Can you split this patch into two, one for the compatible
> update and another for the header file update and send again? Then Rob
> can pick up the yaml file change and I can pick up the header file
> change.


OK, I will do it right away.


Thansk and best regards!


>> index 0281cd1d7e1b..a952d5811823 100644
>> --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> @@ -25,6 +25,7 @@ select:
>>             - ingenic,jz4770-cgu
>>             - ingenic,jz4780-cgu
>>             - ingenic,x1000-cgu
>> +          - ingenic,x1830-cgu
>>     required:
>>       - compatible
>>   
>> @@ -51,6 +52,7 @@ properties:
>>           - ingenic,jz4770-cgu
>>           - ingenic,jz4780-cgu
>>           - ingenic,x1000-cgu
>> +        - ingenic,x1830-cgu
>>         - const: simple-mfd
>>       minItems: 1
>>

Re: [PATCH v10 3/6] dt-bindings: clock: Add X1830 bindings.

[Zhou Yanjie]

Hi Stephen,

I may have misunderstood what you meant (I did not notice that you have 
taken other v10 patches, so I sent the entire v11 series by mistake), do 
I need to resend the split bindings patches separately again?

Thanks and best regards!

在 2020/5/27 下午4:12, Stephen Boyd 写道:
> Quoting 周琰杰 (Zhou Yanjie) (2020-05-26 07:40:41)
>> Add the clock bindings for the X1830 Soc from Ingenic.
>>
>> Signed-off-by: \u5468\u7430\u6770 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>
>> Notes:
>>      v2->v3:
>>      Adjust order from [3/5] in v2 to [4/5] in v3.
>>      
>>      v3->v4:
>>      Adjust order from [4/5] in v3 to [3/4] in v4.
>>      
>>      v4->v5:
>>      Rebase on top of kernel 5.6-rc1.
>>      
>>      v5->v6:
>>      Add missing part of X1830's CGU.
>>      
>>      v6->v7:
>>      No change.
>>      
>>      v7->v8:
>>      Rebase on top of linux-next.
>>      
>>      v8->v9:
>>      No change.
>>      
>>      v9->v10:
>>      Add missing "X1830_CLK_TCU".
>>
>>   .../devicetree/bindings/clock/ingenic,cgu.yaml     |  2 +
>>   include/dt-bindings/clock/x1830-cgu.h              | 55 ++++++++++++++++++++++
>>   2 files changed, 57 insertions(+)
>>   create mode 100644 include/dt-bindings/clock/x1830-cgu.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
> This file is in Rob's DT tree staged for the next release, not in the
> clk tree. Can you split this patch into two, one for the compatible
> update and another for the header file update and send again? Then Rob
> can pick up the yaml file change and I can pick up the header file
> change.
>
>> index 0281cd1d7e1b..a952d5811823 100644
>> --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> @@ -25,6 +25,7 @@ select:
>>             - ingenic,jz4770-cgu
>>             - ingenic,jz4780-cgu
>>             - ingenic,x1000-cgu
>> +          - ingenic,x1830-cgu
>>     required:
>>       - compatible
>>   
>> @@ -51,6 +52,7 @@ properties:
>>           - ingenic,jz4770-cgu
>>           - ingenic,jz4780-cgu
>>           - ingenic,x1000-cgu
>> +        - ingenic,x1830-cgu
>>         - const: simple-mfd
>>       minItems: 1
>>

Re: [PATCH v10 3/6] dt-bindings: clock: Add X1830 bindings.

[Zhou Yanjie]

Hi Stephen,

I'm very sorry, forgive my carelessness, communication with Paul 
Cercueil made me realize that the modification of 
"CLK_OF_DECLARE_DRIVER" mentioned in comments of [7/7] has never really 
existed in the patch, v12 has fixed this problem, and split the patch 
about bindings according to your requirements, it may be a good idea to 
retake [4/7] and [7/7] of v12.

Thanks and best regards!

在 2020/5/27 下午4:12, Stephen Boyd 写道:
> Quoting 周琰杰 (Zhou Yanjie) (2020-05-26 07:40:41)
>> Add the clock bindings for the X1830 Soc from Ingenic.
>>
>> Signed-off-by: \u5468\u7430\u6770 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>
>> Notes:
>>      v2->v3:
>>      Adjust order from [3/5] in v2 to [4/5] in v3.
>>      
>>      v3->v4:
>>      Adjust order from [4/5] in v3 to [3/4] in v4.
>>      
>>      v4->v5:
>>      Rebase on top of kernel 5.6-rc1.
>>      
>>      v5->v6:
>>      Add missing part of X1830's CGU.
>>      
>>      v6->v7:
>>      No change.
>>      
>>      v7->v8:
>>      Rebase on top of linux-next.
>>      
>>      v8->v9:
>>      No change.
>>      
>>      v9->v10:
>>      Add missing "X1830_CLK_TCU".
>>
>>   .../devicetree/bindings/clock/ingenic,cgu.yaml     |  2 +
>>   include/dt-bindings/clock/x1830-cgu.h              | 55 ++++++++++++++++++++++
>>   2 files changed, 57 insertions(+)
>>   create mode 100644 include/dt-bindings/clock/x1830-cgu.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
> This file is in Rob's DT tree staged for the next release, not in the
> clk tree. Can you split this patch into two, one for the compatible
> update and another for the header file update and send again? Then Rob
> can pick up the yaml file change and I can pick up the header file
> change.
>
>> index 0281cd1d7e1b..a952d5811823 100644
>> --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
>> @@ -25,6 +25,7 @@ select:
>>             - ingenic,jz4770-cgu
>>             - ingenic,jz4780-cgu
>>             - ingenic,x1000-cgu
>> +          - ingenic,x1830-cgu
>>     required:
>>       - compatible
>>   
>> @@ -51,6 +52,7 @@ properties:
>>           - ingenic,jz4770-cgu
>>           - ingenic,jz4780-cgu
>>           - ingenic,x1000-cgu
>> +        - ingenic,x1830-cgu
>>         - const: simple-mfd
>>       minItems: 1
>>

[PATCH v10 4/6] clk: Ingenic: Add CGU driver for X1830.

[周琰杰 (Zhou Yanjie)]

Add support for the clocks provided by the CGU in the Ingenic X1830
SoC, making use of the cgu code to do the heavy lifting.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v1->v2:
    1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
      array (reg[2]).
    2.Remove the "pll_info->version" and add a "pll_info->rate_multiplier".
    3.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
      to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
      the old mailbox is in an unstable state.
    
    v2->v3:
    Adjust order from [4/5] in v2 to [5/5] in v3.
    
    v3->v4:
    Adjust order from [5/5] in v3 to [4/4] in v4.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.
    
    v5->v6:
    Add missing part of X1830's CGU.
    
    v6->v7:
    1.Adjust includes, add blank line as Paul Cercueil's suggest.
    2.Move "*cgu" into x1830_cgu_init() as a local variable.
    
    v7->v8:
    No change.
    
    v8->v9:
    Add Paul Cercueil's Reviewed-by, somehow his emails are not displayed
    on the mailing list and patchwork of clock framework subsystem.
    
    v9->v10:
    1.Add missing "X1830_CLK_TCU".
    2.Fix bugs in "X1830_CLK_OTGPHY".

 drivers/clk/ingenic/Kconfig     |  10 +
 drivers/clk/ingenic/Makefile    |   1 +
 drivers/clk/ingenic/x1830-cgu.c | 443 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 454 insertions(+)
 create mode 100644 drivers/clk/ingenic/x1830-cgu.c

diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index b4555b465ea6..580b0cf69ed5 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -55,6 +55,16 @@ config INGENIC_CGU_X1000
 
 	  If building for a X1000 SoC, you want to say Y here.
 
+config INGENIC_CGU_X1830
+	bool "Ingenic X1830 CGU driver"
+	default MACH_X1830
+	select INGENIC_CGU_COMMON
+	help
+	  Support the clocks provided by the CGU hardware on Ingenic X1830
+	  and compatible SoCs.
+
+	  If building for a X1830 SoC, you want to say Y here.
+
 config INGENIC_TCU_CLK
 	bool "Ingenic JZ47xx TCU clocks driver"
 	default MACH_INGENIC
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 8b1dad9b74a7..aaa4bffe03c6 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
 obj-$(CONFIG_INGENIC_CGU_X1000)		+= x1000-cgu.o
+obj-$(CONFIG_INGENIC_CGU_X1830)		+= x1830-cgu.o
 obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
new file mode 100644
index 000000000000..29a637f4a2cc
--- /dev/null
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * X1830 SoC CGU driver
+ * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/x1830-cgu.h>
+
+#include "cgu.h"
+#include "pm.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_CPPCR		0x0c
+#define CGU_REG_APLL		0x10
+#define CGU_REG_MPLL		0x14
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_DDRCDR		0x2c
+#define CGU_REG_USBPCR		0x3c
+#define CGU_REG_USBRDT		0x40
+#define CGU_REG_USBVBFIL	0x44
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_MACCDR		0x54
+#define CGU_REG_EPLL		0x58
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_I2SCDR1		0x70
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_MSC1CDR		0xa4
+#define CGU_REG_CMP_INTR	0xb0
+#define CGU_REG_CMP_INTRE	0xb4
+#define CGU_REG_DRCG		0xd0
+#define CGU_REG_CPCSR		0xd4
+#define CGU_REG_VPLL		0xe0
+#define CGU_REG_MACPHYC		0xe8
+
+/* bits within the OPCR register */
+#define OPCR_GATE_USBPHYCLK	BIT(23)
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
+
+/* bits within the USBPCR register */
+#define USBPCR_SIDDQ		BIT(21)
+#define USBPCR_OTG_DISABLE	BIT(20)
+
+static struct ingenic_cgu *cgu;
+
+static int x1830_usb_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel((readl(reg_opcr) | OPCR_SPENDN0) & ~OPCR_GATE_USBPHYCLK, reg_opcr);
+	writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
+	return 0;
+}
+
+static void x1830_usb_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel((readl(reg_opcr) & ~OPCR_SPENDN0) | OPCR_GATE_USBPHYCLK, reg_opcr);
+	writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
+}
+
+static int x1830_usb_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	return (readl(reg_opcr) & OPCR_SPENDN0) &&
+		!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
+		!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
+}
+
+static const struct clk_ops x1830_otg_phy_ops = {
+	.enable		= x1830_usb_phy_enable,
+	.disable	= x1830_usb_phy_disable,
+	.is_enabled	= x1830_usb_phy_is_enabled,
+};
+
+static const s8 pll_od_encoding[64] = {
+	0x0, 0x1,  -1, 0x2,  -1,  -1,  -1, 0x3,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x4,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x5,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x6,
+};
+
+static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+	[X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[X1830_CLK_APLL] = {
+		"apll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_APLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 30,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_MPLL] = {
+		"mpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_MPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 28,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_EPLL] = {
+		"epll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_EPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 24,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_VPLL] = {
+		"vpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_VPLL,
+			.rate_multiplier = 2,
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_reg = CGU_REG_CPPCR,
+			.bypass_bit = 26,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	/* Custom (SoC-specific) OTG PHY */
+
+	[X1830_CLK_OTGPHY] = {
+		"otg_phy", CGU_CLK_CUSTOM,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.custom = { &x1830_otg_phy_ops },
+	},
+
+	/* Muxes & dividers */
+
+	[X1830_CLK_SCLKA] = {
+		"sclk_a", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
+		.mux = { CGU_REG_CPCCR, 30, 2 },
+	},
+
+	[X1830_CLK_CPUMUX] = {
+		"cpu_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 28, 2 },
+	},
+
+	[X1830_CLK_CPU] = {
+		"cpu", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 15 },
+	},
+
+	[X1830_CLK_L2CACHE] = {
+		"l2cache", CGU_CLK_DIV,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+
+	[X1830_CLK_AHB0] = {
+		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 26, 2 },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
+	},
+
+	[X1830_CLK_AHB2PMUX] = {
+		"ahb2_apb_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 24, 2 },
+	},
+
+	[X1830_CLK_AHB2] = {
+		"ahb2", CGU_CLK_DIV,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
+	},
+
+	[X1830_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 14 },
+	},
+
+	[X1830_CLK_DDR] = {
+		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_DDRCDR, 30, 2 },
+		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 31 },
+	},
+
+	[X1830_CLK_MAC] = {
+		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MACCDR, 30, 2 },
+		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR1, 4 },
+	},
+
+	[X1830_CLK_LCD] = {
+		"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_LPCDR, 30, 2 },
+		.div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+
+	[X1830_CLK_MSCMUX] = {
+		"msc_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MSC0CDR, 30, 2 },
+	},
+
+	[X1830_CLK_MSC0] = {
+		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+
+	[X1830_CLK_MSC1] = {
+		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+
+	[X1830_CLK_SSIPLL] = {
+		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
+	},
+
+	[X1830_CLK_SSIPLL_DIV2] = {
+		"ssi_pll_div2", CGU_CLK_FIXDIV,
+		.parents = { X1830_CLK_SSIPLL },
+		.fixdiv = { 2 },
+	},
+
+	[X1830_CLK_SSIMUX] = {
+		"ssi_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL_DIV2, -1, -1 },
+		.mux = { CGU_REG_SSICDR, 29, 1 },
+	},
+
+	/* Gate-only clocks */
+
+	[X1830_CLK_EMC] = {
+		"emc", CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 0 },
+	},
+
+	[X1830_CLK_EFUSE] = {
+		"efuse", CGU_CLK_GATE,
+		.parents = { X1830_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 1 },
+	},
+
+	[X1830_CLK_OTG] = {
+		"otg", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+
+	[X1830_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+
+	[X1830_CLK_SMB0] = {
+		"smb0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 7 },
+	},
+
+	[X1830_CLK_SMB1] = {
+		"smb1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+
+	[X1830_CLK_SMB2] = {
+		"smb2", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 9 },
+	},
+
+	[X1830_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+
+	[X1830_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+
+	[X1830_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+
+	[X1830_CLK_SFC] = {
+		"sfc", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+
+	[X1830_CLK_PDMA] = {
+		"pdma", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+
+	[X1830_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 30 },
+	},
+
+	[X1830_CLK_DTRNG] = {
+		"dtrng", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 1 },
+	},
+
+	[X1830_CLK_OST] = {
+		"ost", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 11 },
+	},
+};
+
+static void __init x1830_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(x1830_cgu_clocks,
+			      ARRAY_SIZE(x1830_cgu_clocks), np);
+	if (!cgu) {
+		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval) {
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+		return;
+	}
+
+	ingenic_cgu_register_syscore_ops(cgu);
+}
+CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);
-- 
2.11.0

[PATCH v10 5/6] dt-bindings: clock: Add and reorder ABI for X1000.

[周琰杰 (Zhou Yanjie)]

1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not
  directly derived from the output of SSIPLL, but from the clock
  obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2"
  is added for this purpose, it must between "X1000_CLK_SSIPLL"
  and "X1000_CLK_SSIMUX", otherwise an error will occurs when
  initializing the clock. These ABIs are only used for X1000, and
  I'm sure that no other devicetree out there is using these ABIs,
  so we should be able to reorder them.
2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU are also added.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Rob Herring <robh@kernel.org>
---

Notes:
    v5:
    New patch.
    
    v5->v6:
    Add missing part of X1000's CGU.
    
    v6->v7:
    No change.
    
    v7->v8:
    No change.
    
    v8->v9:
    No change.
    
    v9->v10:
    No change.

 include/dt-bindings/clock/x1000-cgu.h | 64 ++++++++++++++++++++---------------
 1 file changed, 36 insertions(+), 28 deletions(-)

diff --git a/include/dt-bindings/clock/x1000-cgu.h b/include/dt-bindings/clock/x1000-cgu.h
index bbaebaf7adb9..0367c8c02e16 100644
--- a/include/dt-bindings/clock/x1000-cgu.h
+++ b/include/dt-bindings/clock/x1000-cgu.h
@@ -12,33 +12,41 @@
 #ifndef __DT_BINDINGS_CLOCK_X1000_CGU_H__
 #define __DT_BINDINGS_CLOCK_X1000_CGU_H__
 
-#define X1000_CLK_EXCLK		0
-#define X1000_CLK_RTCLK		1
-#define X1000_CLK_APLL		2
-#define X1000_CLK_MPLL		3
-#define X1000_CLK_SCLKA		4
-#define X1000_CLK_CPUMUX	5
-#define X1000_CLK_CPU		6
-#define X1000_CLK_L2CACHE	7
-#define X1000_CLK_AHB0		8
-#define X1000_CLK_AHB2PMUX	9
-#define X1000_CLK_AHB2		10
-#define X1000_CLK_PCLK		11
-#define X1000_CLK_DDR		12
-#define X1000_CLK_MAC		13
-#define X1000_CLK_MSCMUX	14
-#define X1000_CLK_MSC0		15
-#define X1000_CLK_MSC1		16
-#define X1000_CLK_SSIPLL	17
-#define X1000_CLK_SSIMUX	18
-#define X1000_CLK_SFC		19
-#define X1000_CLK_I2C0		20
-#define X1000_CLK_I2C1		21
-#define X1000_CLK_I2C2		22
-#define X1000_CLK_UART0		23
-#define X1000_CLK_UART1		24
-#define X1000_CLK_UART2		25
-#define X1000_CLK_SSI		26
-#define X1000_CLK_PDMA		27
+#define X1000_CLK_EXCLK			0
+#define X1000_CLK_RTCLK			1
+#define X1000_CLK_APLL			2
+#define X1000_CLK_MPLL			3
+#define X1000_CLK_OTGPHY		4
+#define X1000_CLK_SCLKA			5
+#define X1000_CLK_CPUMUX		6
+#define X1000_CLK_CPU			7
+#define X1000_CLK_L2CACHE		8
+#define X1000_CLK_AHB0			9
+#define X1000_CLK_AHB2PMUX		10
+#define X1000_CLK_AHB2			11
+#define X1000_CLK_PCLK			12
+#define X1000_CLK_DDR			13
+#define X1000_CLK_MAC			14
+#define X1000_CLK_LCD			15
+#define X1000_CLK_MSCMUX		16
+#define X1000_CLK_MSC0			17
+#define X1000_CLK_MSC1			18
+#define X1000_CLK_OTG			19
+#define X1000_CLK_SSIPLL		20
+#define X1000_CLK_SSIPLL_DIV2	21
+#define X1000_CLK_SSIMUX		22
+#define X1000_CLK_EMC			23
+#define X1000_CLK_EFUSE			24
+#define X1000_CLK_SFC			25
+#define X1000_CLK_I2C0			26
+#define X1000_CLK_I2C1			27
+#define X1000_CLK_I2C2			28
+#define X1000_CLK_UART0			29
+#define X1000_CLK_UART1			30
+#define X1000_CLK_UART2			31
+#define X1000_CLK_TCU			32
+#define X1000_CLK_SSI			33
+#define X1000_CLK_OST			34
+#define X1000_CLK_PDMA			35
 
 #endif /* __DT_BINDINGS_CLOCK_X1000_CGU_H__ */
-- 
2.11.0

[PATCH v10 6/6] clk: X1000: Add FIXDIV for SSI clock of X1000.

[周琰杰 (Zhou Yanjie)]

1.The SSI clock of X1000 not like JZ4770 and JZ4780, they are not
  directly derived from the output of SSIPLL, but from the clock
  obtained by dividing the frequency by 2. "X1000_CLK_SSIPLL_DIV2"
  is added for this purpose, and ensure that it initialized before
  "X1000_CLK_SSIMUX" when initializing the clocks.
2.Clocks of LCD, OTG, EMC, EFUSE, OST, TCU, and gates of CPU, PCLK
  are also added.
3.Use "CLK_OF_DECLARE_DRIVER" like the other CGU drivers.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v5:
    New patch.
    
    V5->v6:
    Add missing part of X1000's CGU.
    
    v6->v7:
    Update commit message.
    
    v7->v8:
    No change.
    
    v8->v9:
    Add Paul Cercueil's Reviewed-by, somehow his emails are not displayed
    on the mailing list and patchwork of clock framework subsystem.
    
    v9->v10:
    No change.

 drivers/clk/ingenic/x1000-cgu.c | 110 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 105 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index c33934d8ac14..68c6e62457e1 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * X1000 SoC CGU driver
- * Copyright (c) 2019 Zhou Yanjie <zhouyanjie@zoho.com>
+ * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
  */
 
 #include <linux/clk-provider.h>
@@ -20,6 +20,9 @@
 #define CGU_REG_CLKGR		0x20
 #define CGU_REG_OPCR		0x24
 #define CGU_REG_DDRCDR		0x2c
+#define CGU_REG_USBPCR		0x3c
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_USBCDR		0x50
 #define CGU_REG_MACCDR		0x54
 #define CGU_REG_I2SCDR		0x60
 #define CGU_REG_LPCDR		0x64
@@ -40,8 +43,47 @@
 #define OPCR_SPENDN0		BIT(7)
 #define OPCR_SPENDN1		BIT(6)
 
+/* bits within the USBPCR register */
+#define USBPCR_SIDDQ		BIT(21)
+#define USBPCR_OTG_DISABLE	BIT(20)
+
 static struct ingenic_cgu *cgu;
 
+static int x1000_usb_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel(readl(reg_opcr) | OPCR_SPENDN0, reg_opcr);
+	writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
+	return 0;
+}
+
+static void x1000_usb_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDN0, reg_opcr);
+	writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
+}
+
+static int x1000_usb_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	return (readl(reg_opcr) & OPCR_SPENDN0) &&
+		!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
+		!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
+}
+
+static const struct clk_ops x1000_otg_phy_ops = {
+	.enable		= x1000_usb_phy_enable,
+	.disable	= x1000_usb_phy_disable,
+	.is_enabled	= x1000_usb_phy_is_enabled,
+};
+
 static const s8 pll_od_encoding[8] = {
 	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
 };
@@ -101,6 +143,15 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		},
 	},
 
+
+	/* Custom (SoC-specific) OTG PHY */
+
+	[X1000_CLK_OTGPHY] = {
+		"otg_phy", CGU_CLK_CUSTOM,
+		.parents = { -1, -1, X1000_CLK_EXCLK, -1 },
+		.custom = { &x1000_otg_phy_ops },
+	},
+
 	/* Muxes & dividers */
 
 	[X1000_CLK_SCLKA] = {
@@ -116,9 +167,10 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 	},
 
 	[X1000_CLK_CPU] = {
-		"cpu", CGU_CLK_DIV,
+		"cpu", CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { X1000_CLK_CPUMUX, -1, -1, -1 },
 		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 30 },
 	},
 
 	[X1000_CLK_L2CACHE] = {
@@ -147,9 +199,10 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 	},
 
 	[X1000_CLK_PCLK] = {
-		"pclk", CGU_CLK_DIV,
+		"pclk", CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { X1000_CLK_AHB2PMUX, -1, -1, -1 },
 		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 28 },
 	},
 
 	[X1000_CLK_DDR] = {
@@ -162,12 +215,20 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 
 	[X1000_CLK_MAC] = {
 		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
-		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL },
 		.mux = { CGU_REG_MACCDR, 31, 1 },
 		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
 		.gate = { CGU_REG_CLKGR, 25 },
 	},
 
+	[X1000_CLK_LCD] = {
+		"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL },
+		.mux = { CGU_REG_LPCDR, 31, 1 },
+		.div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
+		.gate = { CGU_REG_CLKGR, 23 },
+	},
+
 	[X1000_CLK_MSCMUX] = {
 		"msc_mux", CGU_CLK_MUX,
 		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
@@ -188,6 +249,15 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 5 },
 	},
 
+	[X1000_CLK_OTG] = {
+		"otg", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { X1000_CLK_EXCLK, -1,
+					 X1000_CLK_APLL, X1000_CLK_MPLL },
+		.mux = { CGU_REG_USBCDR, 30, 2 },
+		.div = { CGU_REG_USBCDR, 0, 1, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR, 3 },
+	},
+
 	[X1000_CLK_SSIPLL] = {
 		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
 		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
@@ -195,14 +265,32 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.div = { CGU_REG_SSICDR, 0, 1, 8, 29, 28, 27 },
 	},
 
+	[X1000_CLK_SSIPLL_DIV2] = {
+		"ssi_pll_div2", CGU_CLK_FIXDIV,
+		.parents = { X1000_CLK_SSIPLL },
+		.fixdiv = { 2 },
+	},
+
 	[X1000_CLK_SSIMUX] = {
 		"ssi_mux", CGU_CLK_MUX,
-		.parents = { X1000_CLK_EXCLK, X1000_CLK_SSIPLL, -1, -1 },
+		.parents = { X1000_CLK_EXCLK, X1000_CLK_SSIPLL_DIV2, -1, -1 },
 		.mux = { CGU_REG_SSICDR, 30, 1 },
 	},
 
 	/* Gate-only clocks */
 
+	[X1000_CLK_EMC] = {
+		"emc", CGU_CLK_GATE,
+		.parents = { X1000_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 0 },
+	},
+
+	[X1000_CLK_EFUSE] = {
+		"efuse", CGU_CLK_GATE,
+		.parents = { X1000_CLK_AHB2, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 1 },
+	},
+
 	[X1000_CLK_SFC] = {
 		"sfc", CGU_CLK_GATE,
 		.parents = { X1000_CLK_SSIPLL, -1, -1, -1 },
@@ -245,12 +333,24 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR, 16 },
 	},
 
+	[X1000_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 18 },
+	},
+
 	[X1000_CLK_SSI] = {
 		"ssi", CGU_CLK_GATE,
 		.parents = { X1000_CLK_SSIMUX, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 19 },
 	},
 
+	[X1000_CLK_OST] = {
+		"ost", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 20 },
+	},
+
 	[X1000_CLK_PDMA] = {
 		"pdma", CGU_CLK_GATE,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
-- 
2.11.0