* [RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
@ 2020-05-18 0:49 Steve Lee
2020-05-26 22:36 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Steve Lee @ 2020-05-18 0:49 UTC (permalink / raw)
To: lgirdwood, broonie, robh+dt, alsa-devel, devicetree, linux-kernel
Cc: ryan.lee.maxim, ryans.lee, steves.lee.maxim, Steve Lee
Add documentation for DT binding of max98390 amplifier driver.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
---
Changed since V4:
* No changes.
Changed since V3:
* No changes.
Changed since V2:
* No changes.
Changed since V1:
* Modified sample text in example
.../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt
new file mode 100644
index 000000000000..0ddd4c6ae55e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98390.txt
@@ -0,0 +1,26 @@
+Maxim Integrated MAX98390 Speaker Amplifier
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : "maxim,max98390"
+
+ - reg : the I2C address of the device.
+
+Optional properties:
+
+- maxim,temperature_calib
+ u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12
+
+- maxim,r0_calib
+ u32. This is r0 calibration data which was measured in factory mode.
+
+Example:
+
+codec: max98390@38 {
+ compatible = "maxim,max98390";
+ reg = <0x38>;
+ maxim,temperature_calib = <1024>;
+ maxim,r0_calib = <100232>;
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
2020-05-18 0:49 [RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390 Steve Lee
@ 2020-05-26 22:36 ` Rob Herring
2020-05-28 10:02 ` Steve Lee
0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2020-05-26 22:36 UTC (permalink / raw)
To: Steve Lee
Cc: lgirdwood, broonie, alsa-devel, devicetree, linux-kernel,
ryan.lee.maxim, ryans.lee, steves.lee.maxim
On Mon, May 18, 2020 at 09:49:30AM +0900, Steve Lee wrote:
> Add documentation for DT binding of max98390 amplifier driver.
>
> Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
> ---
>
>
> Changed since V4:
> * No changes.
> Changed since V3:
> * No changes.
> Changed since V2:
> * No changes.
> Changed since V1:
> * Modified sample text in example
You are obviously sending patches too quickly. Give folks a chance to
review.
>
> .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++
Bindings are now in DT schema format. Please convert this. See
Documentation/devicetree/writing-schema.rst
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt
> new file mode 100644
> index 000000000000..0ddd4c6ae55e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/max98390.txt
> @@ -0,0 +1,26 @@
> +Maxim Integrated MAX98390 Speaker Amplifier
> +
> +This device supports I2C.
> +
> +Required properties:
> +
> + - compatible : "maxim,max98390"
> +
> + - reg : the I2C address of the device.
> +
> +Optional properties:
> +
> +- maxim,temperature_calib
> + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12
> +
> +- maxim,r0_calib
> + u32. This is r0 calibration data which was measured in factory mode.
Unless these are shared already with other Maxim chips, s/_/-/.
> +
> +Example:
> +
> +codec: max98390@38 {
amplifier@38
> + compatible = "maxim,max98390";
> + reg = <0x38>;
> + maxim,temperature_calib = <1024>;
> + maxim,r0_calib = <100232>;
> +};
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390
2020-05-26 22:36 ` Rob Herring
@ 2020-05-28 10:02 ` Steve Lee
0 siblings, 0 replies; 3+ messages in thread
From: Steve Lee @ 2020-05-28 10:02 UTC (permalink / raw)
To: Rob Herring
Cc: Steve Lee, Liam Girdwood, Mark Brown, ALSA development,
devicetree, Linux Kernel Mailing List, ryan.lee.maxim, ryans.lee
On Wed, May 27, 2020 at 7:36 AM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, May 18, 2020 at 09:49:30AM +0900, Steve Lee wrote:
> > Add documentation for DT binding of max98390 amplifier driver.
> >
> > Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
> > ---
> >
> >
> > Changed since V4:
> > * No changes.
> > Changed since V3:
> > * No changes.
> > Changed since V2:
> > * No changes.
> > Changed since V1:
> > * Modified sample text in example
>
> You are obviously sending patches too quickly. Give folks a chance to
> review.
Thanks for your feedback !.
>
> >
> > .../devicetree/bindings/sound/max98390.txt | 26 +++++++++++++++++++
>
> Bindings are now in DT schema format. Please convert this. See
> Documentation/devicetree/writing-schema.rst
Thanks for review. I will change txt to yaml version.
>
> > 1 file changed, 26 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/sound/max98390.txt
> >
> > diff --git a/Documentation/devicetree/bindings/sound/max98390.txt b/Documentation/devicetree/bindings/sound/max98390.txt
> > new file mode 100644
> > index 000000000000..0ddd4c6ae55e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/max98390.txt
> > @@ -0,0 +1,26 @@
> > +Maxim Integrated MAX98390 Speaker Amplifier
> > +
> > +This device supports I2C.
> > +
> > +Required properties:
> > +
> > + - compatible : "maxim,max98390"
> > +
> > + - reg : the I2C address of the device.
> > +
> > +Optional properties:
> > +
> > +- maxim,temperature_calib
> > + u32. The calculated temperature data was measured while doing the calibration. Data : Temp / 100 * 2^12
> > +
> > +- maxim,r0_calib
> > + u32. This is r0 calibration data which was measured in factory mode.
>
> Unless these are shared already with other Maxim chips, s/_/-/.
>
> > +
> > +Example:
> > +
> > +codec: max98390@38 {
>
> amplifier@38
I will change example as you advise.
>
> > + compatible = "maxim,max98390";
> > + reg = <0x38>;
> > + maxim,temperature_calib = <1024>;
> > + maxim,r0_calib = <100232>;
> > +};
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-28 10:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-18 0:49 [RESEND][V5 PATCH 1/2] dt-bindings: Added device tree binding for max98390 Steve Lee
2020-05-26 22:36 ` Rob Herring
2020-05-28 10:02 ` Steve Lee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).