From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
hkallweit1@gmail.com, richardcochran@gmail.com,
alexandre.belloni@bootlin.com, UNGLinuxDriver@microchip.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, allan.nielsen@microchip.com,
foss@0leil.net, antoine.tenart@bootlin.com
Subject: [PATCH net-next 8/8] MIPS: dts: ocelot: describe the load/save GPIO
Date: Wed, 27 May 2020 18:41:58 +0200 [thread overview]
Message-ID: <20200527164158.313025-9-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20200527164158.313025-1-antoine.tenart@bootlin.com>
From: Quentin Schulz <quentin.schulz@bootlin.com>
This patch adds a description of the load/save GPIN pin, used in the
VSC8584 PHY for timestamping operations. The related pinctrl description
is also added.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index 33991fd209f5..897de5025d7f 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -3,6 +3,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy-ocelot-serdes.h>
#include "ocelot.dtsi"
@@ -25,6 +26,11 @@ phy_int_pins: phy_int_pins {
pins = "GPIO_4";
function = "gpio";
};
+
+ phy_load_save_pins: phy_load_save_pins {
+ pins = "GPIO_10";
+ function = "ptp2";
+ };
};
&mdio0 {
@@ -34,27 +40,31 @@ &mdio0 {
&mdio1 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&miim1>, <&phy_int_pins>;
+ pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
phy7: ethernet-phy@0 {
reg = <0>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
phy6: ethernet-phy@1 {
reg = <1>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
phy5: ethernet-phy@2 {
reg = <2>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
phy4: ethernet-phy@3 {
reg = <3>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
};
--
2.26.2
prev parent reply other threads:[~2020-05-27 16:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 16:41 [PATCH net-next 0/8] net: phy: mscc: PHC and timestamping support Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 1/8] net: phy: add support for a common probe between shared PHYs Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 2/8] net: phy: mscc: fix copyright and author information in MACsec Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 3/8] net: phy: mscc: remove the TR CLK disable magic value Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 4/8] net: phy: mscc: take into account the 1588 block in MACsec init Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 5/8] net: phy: mscc: 1588 block initialization Antoine Tenart
2020-05-27 17:35 ` Jakub Kicinski
2020-05-28 6:57 ` Antoine Tenart
2020-05-27 22:04 ` kbuild test robot
2020-05-27 16:41 ` [PATCH net-next 6/8] net: phy: mscc: timestamping and PHC support Antoine Tenart
2020-05-28 14:34 ` Richard Cochran
2020-05-28 15:23 ` Antoine Tenart
2020-05-27 16:41 ` [PATCH net-next 7/8] dt-bindings: net: phy: vsc8531: document the load/save GPIO Antoine Tenart
2020-05-27 16:41 ` Antoine Tenart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527164158.313025-9-antoine.tenart@bootlin.com \
--to=antoine.tenart@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=allan.nielsen@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=foss@0leil.net \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).