[PATCH AUTOSEL 4.19 01/17] ARC: Fix ICCM & DCCM runtime size checks

[PATCH AUTOSEL 4.19 01/17] ARC: Fix ICCM & DCCM runtime size checks

[Sasha Levin]

From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.

Fix that.

Reported-by: Paul Greco <pmgreco@us.ibm.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/kernel/setup.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 89c97dcfa360..c10994daee39 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -15,6 +15,7 @@
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
@@ -406,12 +407,12 @@ static void arc_chk_core_config(void)
 	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 02/17] ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ]

Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.

Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-eznps/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
index ce908e2c5282..71378bfec8d0 100644
--- a/arch/arc/plat-eznps/Kconfig
+++ b/arch/arc/plat-eznps/Kconfig
@@ -6,6 +6,7 @@
 
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
+	depends on ISA_ARCOMPACT
 	select CPU_BIG_ENDIAN
 	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
-- 
2.25.1

[PATCH AUTOSEL 4.19 03/17] evm: Fix RCU list related warnings

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 770f60586d2af0590be263f55fd079226313922c ]

This patch fixes the following warning and few other instances of
traversal of evm_config_xattrnames list:

[   32.848432] =============================
[   32.848707] WARNING: suspicious RCU usage
[   32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted
[   32.849308] -----------------------------
[   32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!!

Since entries are only added to the list and never deleted, use
list_for_each_entry_lockless() instead of list_for_each_entry_rcu for
traversing the list.  Also, add a relevant comment in evm_secfs.c to
indicate this fact.

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/evm/evm_crypto.c | 2 +-
 security/integrity/evm/evm_main.c   | 4 ++--
 security/integrity/evm/evm_secfs.c  | 9 ++++++++-
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
index f0878d81dcef..d20f5792761c 100644
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -215,7 +215,7 @@ static int evm_calc_hmac_or_hash(struct dentry *dentry,
 	data->hdr.length = crypto_shash_digestsize(desc->tfm);
 
 	error = -ENODATA;
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		bool is_ima = false;
 
 		if (strcmp(xattr->name, XATTR_NAME_IMA) == 0)
diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
index 7f3f54d89a6e..e11d860fdce4 100644
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -102,7 +102,7 @@ static int evm_find_protected_xattrs(struct dentry *dentry)
 	if (!(inode->i_opflags & IOP_XATTR))
 		return -EOPNOTSUPP;
 
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		error = __vfs_getxattr(dentry, inode, xattr->name, NULL, 0);
 		if (error < 0) {
 			if (error == -ENODATA)
@@ -233,7 +233,7 @@ static int evm_protected_xattr(const char *req_xattr_name)
 	struct xattr_list *xattr;
 
 	namelen = strlen(req_xattr_name);
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		if ((strlen(xattr->name) == namelen)
 		    && (strncmp(req_xattr_name, xattr->name, namelen) == 0)) {
 			found = 1;
diff --git a/security/integrity/evm/evm_secfs.c b/security/integrity/evm/evm_secfs.c
index 77de71b7794c..f112ca593adc 100644
--- a/security/integrity/evm/evm_secfs.c
+++ b/security/integrity/evm/evm_secfs.c
@@ -237,7 +237,14 @@ static ssize_t evm_write_xattrs(struct file *file, const char __user *buf,
 		goto out;
 	}
 
-	/* Guard against races in evm_read_xattrs */
+	/*
+	 * xattr_list_mutex guards against races in evm_read_xattrs().
+	 * Entries are only added to the evm_config_xattrnames list
+	 * and never deleted. Therefore, the list is traversed
+	 * using list_for_each_entry_lockless() without holding
+	 * the mutex in evm_calc_hmac_or_hash(), evm_find_protected_xattrs()
+	 * and evm_protected_xattr().
+	 */
 	mutex_lock(&xattr_list_mutex);
 	list_for_each_entry(tmp, &evm_config_xattrnames, list) {
 		if (strcmp(xattr->name, tmp->name) == 0) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 04/17] i2c: altera: Fix race between xfer_msg and isr thread

[Sasha Levin]

From: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>

[ Upstream commit 5d4c7977499a736f3f80826bdc9744344ad55589 ]

Use a mutex to protect access to idev->msg_len, idev->buf, etc. which
are modified by both altr_i2c_xfer_msg() and altr_i2c_isr().

This is the minimal fix for easy backporting. A cleanup to remove the
spinlock will be added later.

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
[wsa: updated commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-altera.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 8915ee30a5b4..1d59eede537b 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -81,6 +81,7 @@
  * @isr_mask: cached copy of local ISR enables.
  * @isr_status: cached copy of local ISR status.
  * @lock: spinlock for IRQ synchronization.
+ * @isr_mutex: mutex for IRQ thread.
  */
 struct altr_i2c_dev {
 	void __iomem *base;
@@ -97,6 +98,7 @@ struct altr_i2c_dev {
 	u32 isr_mask;
 	u32 isr_status;
 	spinlock_t lock;	/* IRQ synchronization */
+	struct mutex isr_mutex;
 };
 
 static void
@@ -256,10 +258,11 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev)
 	struct altr_i2c_dev *idev = _dev;
 	u32 status = idev->isr_status;
 
+	mutex_lock(&idev->isr_mutex);
 	if (!idev->msg) {
 		dev_warn(idev->dev, "unexpected interrupt\n");
 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
-		return IRQ_HANDLED;
+		goto out;
 	}
 	read = (idev->msg->flags & I2C_M_RD) != 0;
 
@@ -312,6 +315,8 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev)
 		complete(&idev->msg_complete);
 		dev_dbg(idev->dev, "Message Complete\n");
 	}
+out:
+	mutex_unlock(&idev->isr_mutex);
 
 	return IRQ_HANDLED;
 }
@@ -323,6 +328,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 	u32 value;
 	u8 addr = i2c_8bit_addr_from_msg(msg);
 
+	mutex_lock(&idev->isr_mutex);
 	idev->msg = msg;
 	idev->msg_len = msg->len;
 	idev->buf = msg->buf;
@@ -347,6 +353,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 		altr_i2c_int_enable(idev, imask, true);
 		altr_i2c_fill_tx_fifo(idev);
 	}
+	mutex_unlock(&idev->isr_mutex);
 
 	time_left = wait_for_completion_timeout(&idev->msg_complete,
 						ALTR_I2C_XFER_TIMEOUT);
@@ -420,6 +427,7 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	idev->dev = &pdev->dev;
 	init_completion(&idev->msg_complete);
 	spin_lock_init(&idev->lock);
+	mutex_init(&idev->isr_mutex);
 
 	ret = device_property_read_u32(idev->dev, "fifo-size",
 				       &idev->fifo_size);
-- 
2.25.1

[PATCH AUTOSEL 4.19 05/17] net sched: fix reporting the first-time use timestamp

[Sasha Levin]

From: Roman Mashak <mrv@mojatatu.com>

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/act_api.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/net/act_api.h b/include/net/act_api.h
index 0c82d7ea6ee1..c48b750de2fc 100644
--- a/include/net/act_api.h
+++ b/include/net/act_api.h
@@ -67,7 +67,8 @@ static inline void tcf_tm_dump(struct tcf_t *dtm, const struct tcf_t *stm)
 {
 	dtm->install = jiffies_to_clock_t(jiffies - stm->install);
 	dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse);
-	dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse);
+	dtm->firstuse = stm->firstuse ?
+		jiffies_to_clock_t(jiffies - stm->firstuse) : 0;
 	dtm->expires = jiffies_to_clock_t(stm->expires);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 06/17] x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ]

When building with Clang + -Wtautological-compare and
CONFIG_CPUMASK_OFFSTACK unset:

  arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus'
  equal to a null pointer is always false [-Wtautological-pointer-compare]
          if (downed_cpus == NULL &&
              ^~~~~~~~~~~    ~~~~
  arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
  equal to a null pointer is always false [-Wtautological-pointer-compare]
          if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
              ^~~~~~~~~~~    ~~~~
  2 warnings generated.

Commit

  f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")

added cpumask_available() to fix warnings of this nature. Use that here
so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's
value.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/982
Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/mmio-mod.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 2c1ecf4763c4..e32b003e064a 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -384,7 +384,7 @@ static void enter_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL &&
+	if (!cpumask_available(downed_cpus) &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
 		pr_notice("Failed to allocate mask\n");
 		goto out;
@@ -414,7 +414,7 @@ static void leave_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
+	if (!cpumask_available(downed_cpus) || cpumask_weight(downed_cpus) == 0)
 		return;
 	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 07/17] net: bmac: Fix read of MAC address from ROM

[Sasha Levin]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ]

In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.

This change fixes the for-loop to only read/write six bytes.

Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apple/bmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index 6a8e2567f2bd..ab6ce85540b8 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1181,7 +1181,7 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea)
 	int i;
 	unsigned short data;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 3; i++)
 		{
 			reset_and_select_srom(dev);
 			data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
-- 
2.25.1

[PATCH AUTOSEL 4.19 08/17] r8152: support additional Microsoft Surface Ethernet Adapter variant

[Sasha Levin]

From: Marc Payne <marc.payne@mdpsys.co.uk>

[ Upstream commit c27a204383616efba5a4194075e90819961ff66a ]

Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.

Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).

Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_ether.c | 11 +++++++++--
 drivers/net/usb/r8152.c     |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c3cf9ae6d1df..1de97b69ce4e 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -821,14 +821,21 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
-/* Microsoft Surface 3 dock (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 	.driver_info = 0,
 },
 
-	/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0639178cb009..1b1ec4197830 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5344,6 +5344,7 @@ static const struct usb_device_id rtl8152_table[] = {
 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
+	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x304f)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x3062)},
-- 
2.25.1

[PATCH AUTOSEL 4.19 09/17] drm/edid: Add Oculus Rift S to non-desktop list

[Sasha Levin]

From: Jan Schmidt <jan@centricular.com>

[ Upstream commit 5a3f610877e9d08968ea7237551049581f02b163 ]

Add a quirk for the Oculus Rift S OVR0012 display so
it shows up as a non-desktop display.

Signed-off-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507180628.740936-1-jan@centricular.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index d5dcee7f1fc8..108f542176b8 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -198,10 +198,11 @@ static const struct edid_quirk {
 	{ "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP },
 	{ "HVR", 0xaa02, EDID_QUIRK_NON_DESKTOP },
 
-	/* Oculus Rift DK1, DK2, and CV1 VR Headsets */
+	/* Oculus Rift DK1, DK2, CV1 and Rift S VR Headsets */
 	{ "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP },
 	{ "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP },
 	{ "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP },
+	{ "OVR", 0x0012, EDID_QUIRK_NON_DESKTOP },
 
 	/* Windows Mixed Reality Headsets */
 	{ "ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP },
-- 
2.25.1

[PATCH AUTOSEL 4.19 10/17] s390/mm: fix set_huge_pte_at() for empty ptes

[Sasha Levin]

From: Gerald Schaefer <gerald.schaefer@de.ibm.com>

[ Upstream commit ac8372f3b4e41015549b331a4f350224661e7fc6 ]

On s390, the layout of normal and large ptes (i.e. pmds/puds) differs.
Therefore, set_huge_pte_at() does a conversion from a normal pte to
the corresponding large pmd/pud. So, when converting an empty pte, this
should result in an empty pmd/pud, which would return true for
pmd/pud_none().

However, after conversion we also mark the pmd/pud as large, and
therefore present. For empty ptes, this will result in an empty pmd/pud
that is also marked as large, and pmd/pud_none() would not return true.

There is currently no issue with this behaviour, as set_huge_pte_at()
does not seem to be called for empty ptes. It would be valid though, so
let's fix this by not marking empty ptes as large in set_huge_pte_at().

This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add more arch page table helper
tests").

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/hugetlbpage.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 5674710a4841..7dfae86afa47 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -159,10 +159,13 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		rste &= ~_SEGMENT_ENTRY_NOEXEC;
 
 	/* Set correct table type for 2G hugepages */
-	if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
-		rste |= _REGION_ENTRY_TYPE_R3 | _REGION3_ENTRY_LARGE;
-	else
+	if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) {
+		if (likely(pte_present(pte)))
+			rste |= _REGION3_ENTRY_LARGE;
+		rste |= _REGION_ENTRY_TYPE_R3;
+	} else if (likely(pte_present(pte)))
 		rste |= _SEGMENT_ENTRY_LARGE;
+
 	clear_huge_pte_skeys(mm, rste);
 	pte_val(*ptep) = rste;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 11/17] null_blk: return error for invalid zone size

[Sasha Levin]

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

[ Upstream commit e274832590211c4b1b1e807ca66fad8b5bb8b328 ]

In null_init_zone_dev() check if the zone size is larger than device
capacity, return error if needed.

This also fixes the following oops :-

null_blk: changed the number of conventional zones to 4294967295
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0
Oops: 0002 [#1] SMP NOPTI
CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4
RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk]
RSP: 0018:ffffc90007007e00 EFLAGS: 00010246
RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510
RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000
R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0
Call Trace:
 null_add_dev+0x534/0x71b [null_blk]
 nullb_device_power_store.cold.41+0x8/0x2e [null_blk]
 configfs_write_file+0xe6/0x150
 vfs_write+0xba/0x1e0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x60/0x250
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fcb51c71840

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_zoned.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index 7c6b86d98700..d1725ac636c0 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -20,6 +20,10 @@ int null_zone_init(struct nullb_device *dev)
 		pr_err("null_blk: zone_size must be power-of-two\n");
 		return -EINVAL;
 	}
+	if (dev->zone_size > dev->size) {
+		pr_err("Zone size larger than device capacity\n");
+		return -EINVAL;
+	}
 
 	dev->zone_size_sects = dev->zone_size << ZONE_SIZE_SHIFT;
 	dev->nr_zones = dev_size >>
-- 
2.25.1

[PATCH AUTOSEL 4.19 12/17] net/ethernet/freescale: rework quiesce/activate for ucc_geth

[Sasha Levin]

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index a5bf02ae4bc5..5de6f7c73c1f 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
 #include <soc/fsl/qe/ucc.h>
 #include <soc/fsl/qe/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1

[PATCH AUTOSEL 4.19 13/17] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x

[Sasha Levin]

From: Jonathan McDowell <noodles@earth.li>

[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]

The ipq806x_gmac_probe() function enables the PTP clock but not the
appropriate interface clocks. This means that if the bootloader hasn't
done so attempting to bring up the interface will fail with an error
like:

[   59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma
[   59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[   59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed

This patch, a slightly cleaned up version of one posted by Sergey
Sergeev in:

https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257

correctly enables the clock; we have already configured the source just
before this.

Tested on a MikroTik RB3011.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 0d21082ceb93..4d75158c64b2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -318,6 +318,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 	/* Enable PTP clock */
 	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
 	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+	default:
+		/* We don't get here; the switch above will have errored out */
+		unreachable();
+	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
 	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 14/17] net: sun: fix missing release regions in cas_init_one().

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 5a730153984dd13f82ffae93d7170d76eba204e9 ]

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".

Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/cassini.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 7ec4eb74fe21..d323dd9daccb 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -4971,7 +4971,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 					  cas_cacheline_size)) {
 			dev_err(&pdev->dev, "Could not set PCI cache "
 			       "line size\n");
-			goto err_write_cacheline;
+			goto err_out_free_res;
 		}
 	}
 #endif
@@ -5144,7 +5144,6 @@ err_out_iounmap:
 err_out_free_res:
 	pci_release_regions(pdev);
 
-err_write_cacheline:
 	/* Try to restore it in case the error occurred after we
 	 * set it.
 	 */
-- 
2.25.1

[PATCH AUTOSEL 4.19 15/17] net/mlx5: Add command entry handling completion

[Sasha Levin]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ]

When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 14 ++++++++++++++
 include/linux/mlx5/driver.h                   |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 300456684728..a686082762df 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -835,6 +835,7 @@ static void cmd_work_handler(struct work_struct *work)
 	int alloc_ret;
 	int cmd_mode;
 
+	complete(&ent->handling);
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
 	if (!ent->page_queue) {
@@ -953,6 +954,11 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent)
 	struct mlx5_cmd *cmd = &dev->cmd;
 	int err;
 
+	if (!wait_for_completion_timeout(&ent->handling, timeout) &&
+	    cancel_work_sync(&ent->work)) {
+		ent->ret = -ECANCELED;
+		goto out_err;
+	}
 	if (cmd->mode == CMD_MODE_POLLING || ent->polling) {
 		wait_for_completion(&ent->done);
 	} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
@@ -960,12 +966,17 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent)
 		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 	}
 
+out_err:
 	err = ent->ret;
 
 	if (err == -ETIMEDOUT) {
 		mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
 			       mlx5_command_str(msg_to_opcode(ent->in)),
 			       msg_to_opcode(ent->in));
+	} else if (err == -ECANCELED) {
+		mlx5_core_warn(dev, "%s(0x%x) canceled on out of queue timeout.\n",
+			       mlx5_command_str(msg_to_opcode(ent->in)),
+			       msg_to_opcode(ent->in));
 	}
 	mlx5_core_dbg(dev, "err %d, delivery status %s(%d)\n",
 		      err, deliv_status_to_str(ent->status), ent->status);
@@ -1001,6 +1012,7 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in,
 	ent->token = token;
 	ent->polling = force_polling;
 
+	init_completion(&ent->handling);
 	if (!callback)
 		init_completion(&ent->done);
 
@@ -1020,6 +1032,8 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in,
 	err = wait_func(dev, ent);
 	if (err == -ETIMEDOUT)
 		goto out;
+	if (err == -ECANCELED)
+		goto out_free;
 
 	ds = ent->ts2 - ent->ts1;
 	op = MLX5_GET(mbox_in, in->first.data, opcode);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index ae64fced188d..dc89a964c1f3 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -902,6 +902,7 @@ struct mlx5_cmd_work_ent {
 	struct delayed_work	cb_timeout_work;
 	void		       *context;
 	int			idx;
+	struct completion	handling;
 	struct completion	done;
 	struct mlx5_cmd        *cmd;
 	struct work_struct	work;
-- 
2.25.1

[PATCH AUTOSEL 4.19 16/17] net/mlx4_core: fix a memory leak bug.

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit febfd9d3c7f74063e8e630b15413ca91b567f963 ]

In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.

Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 75213046563c..04ebce738db9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -2731,7 +2731,7 @@ void mlx4_opreq_action(struct work_struct *work)
 		if (err) {
 			mlx4_err(dev, "Failed to retrieve required operation: %d\n",
 				 err);
-			return;
+			goto out;
 		}
 		MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET);
 		MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);
-- 
2.25.1

[PATCH AUTOSEL 4.19 17/17] net: smsc911x: Fix runtime PM imbalance on error

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ]

Remove runtime PM usage counter decrement when the
increment function has not been called to keep the
counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/smsc/smsc911x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index ce4bfecc26c7..ae80a223975d 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2515,20 +2515,20 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	retval = smsc911x_init(dev);
 	if (retval < 0)
-		goto out_disable_resources;
+		goto out_init_fail;
 
 	netif_carrier_off(dev);
 
 	retval = smsc911x_mii_init(pdev, dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	}
 
 	retval = register_netdev(dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i registering device", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	} else {
 		SMSC_TRACE(pdata, probe,
 			   "Network interface: \"%s\"", dev->name);
@@ -2569,9 +2569,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_disable_resources:
+out_init_fail:
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+out_disable_resources:
 	(void)smsc911x_disable_resources(pdev);
 out_enable_resources_fail:
 	smsc911x_free_resources(pdev);
-- 
2.25.1