* [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks
@ 2020-05-23 13:12 Jonathan Marek
2020-05-29 3:22 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Marek @ 2020-05-23 13:12 UTC (permalink / raw)
To: linux-arm-msm
Cc: Andy Gross, Bjorn Andersson, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Use the dt-bindings defines for qupv3_id_1 node's clocks.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 9c210fbac65e..04c9c215ffcd 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc 133>, <&gcc 134>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -302,7 +303,7 @@ uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
clock-names = "se";
- clocks = <&gcc 113>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.26.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks
2020-05-23 13:12 [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks Jonathan Marek
@ 2020-05-29 3:22 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2020-05-29 3:22 UTC (permalink / raw)
To: Jonathan Marek
Cc: linux-arm-msm, Andy Gross, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Sat 23 May 06:12 PDT 2020, Jonathan Marek wrote:
> Use the dt-bindings defines for qupv3_id_1 node's clocks.
>
Applied
Thanks,
Bjorn
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 9c210fbac65e..04c9c215ffcd 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0x0 0x00ac0000 0x0 0x6000>;
> clock-names = "m-ahb", "s-ahb";
> - clocks = <&gcc 133>, <&gcc 134>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -302,7 +303,7 @@ uart2: serial@a90000 {
> compatible = "qcom,geni-debug-uart";
> reg = <0x0 0x00a90000 0x0 0x4000>;
> clock-names = "se";
> - clocks = <&gcc 113>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> --
> 2.26.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-29 3:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-23 13:12 [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks Jonathan Marek
2020-05-29 3:22 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).