[PATCH 4.9 00/61] 4.9.226-rc1 review

[PATCH 4.9 00/61] 4.9.226-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.226 release.
There are 61 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 03 Jun 2020 17:38:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.226-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.226-rc1

Salil Mehta <salil.mehta@huawei.com>
    net: hns: Fixes the missing put_device in positive leg for roce reset

Guoqing Jiang <gqjiang@suse.com>
    sc16is7xx: move label 'err_spi' to correct section

Liviu Dudau <liviu@dudau.co.uk>
    mm/vmalloc.c: don't dereference possible NULL pointer in __vunmap()

Roopa Prabhu <roopa@cumulusnetworks.com>
    net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags

Thomas Gleixner <tglx@linutronix.de>
    genirq/generic_pending: Do not lose pending affinity update

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"

Qiushi Wu <wu000273@umn.edu>
    bonding: Fix reference count leak in bond_sysfs_slave_add.

Qiushi Wu <wu000273@umn.edu>
    qlcnic: fix missing release in qlcnic_83xx_interrupt_test.

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code

Phil Sutter <phil@nwl.cc>
    netfilter: ipset: Fix subcounter update skip

Michael Braun <michael-dev@fami-braun.de>
    netfilter: nft_reject_bridge: enable reject with bridge vlan

Xin Long <lucien.xin@gmail.com>
    ip_vti: receive ipip packet by calling ip_tunnel_rcv

Jeremy Sowden <jeremy@azazel.net>
    vti4: eliminated some duplicate code.

Xin Long <lucien.xin@gmail.com>
    xfrm: fix a NULL-ptr deref in xfrm_local_error

Xin Long <lucien.xin@gmail.com>
    xfrm: fix a warning in xfrm_policy_insert_list

Xin Long <lucien.xin@gmail.com>
    xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input

Alexander Dahl <post@lespocky.de>
    x86/dma: Fix max PFN arithmetic overflow on 32 bit systems

Linus Lüssing <ll@simonwunderlich.de>
    mac80211: mesh: fix discovery timer re-arming issue / crash

Helge Deller <deller@gmx.de>
    parisc: Fix kernel panic in mem_init()

Qiushi Wu <wu000273@umn.edu>
    iommu: Fix reference count leak in iommu_group_alloc.

Arnd Bergmann <arnd@arndb.de>
    include/asm-generic/topology.h: guard cpumask_of_node() macro argument

Alexander Potapenko <glider@google.com>
    fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()

Jerry Lee <leisurelysw24@gmail.com>
    libceph: ignore pool overlay and cache logic on redirects

Eric W. Biederman <ebiederm@xmission.com>
    exec: Always set cap_ambient in cap_bprm_set_creds

Chris Chiu <chiu@endlessm.com>
    ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC

Changming Liu <liu.changm@northeastern.edu>
    ALSA: hwdep: fix a left shifting 1 by 31 UB bug

Robert Beckett <bob.beckett@collabora.com>
    ARM: dts/imx6q-bx50v3: Set display interface clock parents

Sebastian Reichel <sebastian.reichel@collabora.co.uk>
    ARM: dts: imx6q-bx50v3: Add internal switch

Martyn Welch <martyn.welch@collabora.co.uk>
    ARM: dts: imx: Correct B850v3 clock assignment

Kaike Wan <kaike.wan@intel.com>
    IB/qib: Call kobject_put() when kobject_init_and_add() fails

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: uaccess: fix DACR mismatch with nested exceptions

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: uaccess: integrate uaccess_save and uaccess_restore

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h

Stefan Agner <stefan@agner.ch>
    ARM: 8843/1: use unified assembler in headers

Wei Yongjun <weiyongjun1@huawei.com>
    Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()

Kevin Locke <kevin@kevinlocke.name>
    Input: i8042 - add ThinkPad S230u to i8042 reset list

Łukasz Patron <priv.luk@gmail.com>
    Input: xpad - add custom init packet for Xbox One S controllers

Brendan Shanks <bshanks@codeweavers.com>
    Input: evdev - call input_flush_device() on release(), not flush()

Kevin Locke <kevin@kevinlocke.name>
    Input: i8042 - add ThinkPad S230u to i8042 nomux list

James Hilliard <james.hilliard1@gmail.com>
    Input: usbtouchscreen - add support for BonXeon TP

Steve French <stfrench@microsoft.com>
    cifs: Fix null pointer check in cifs_read

Masahiro Yamada <masahiroy@kernel.org>
    usb: gadget: legacy: fix redundant initialization warnings

Lei Xue <carmark.dlut@gmail.com>
    cachefiles: Fix race between read_waiter and read_copier involving op->to_do

Bob Peterson <rpeterso@redhat.com>
    gfs2: don't call quota_unhold if quotas are not locked

Bob Peterson <rpeterso@redhat.com>
    gfs2: move privileged user check to gfs2_quota_lock_check

Chuhong Yuan <hslester96@gmail.com>
    net: microchip: encx24j600: add missed kthread_stop

Stephen Warren <swarren@nvidia.com>
    gpio: tegra: mask GPIO IRQs during IRQ shutdown

Kalderon, Michal <Michal.Kalderon@cavium.com>
    IB/cma: Fix reference count leak when no ipv4 addresses are set

Dmitry V. Levin <ldv@altlinux.org>
    uapi: fix linux/if_pppol2tp.h userspace compilation errors

Qiushi Wu <wu000273@umn.edu>
    net/mlx4_core: fix a memory leak bug.

Qiushi Wu <wu000273@umn.edu>
    net: sun: fix missing release regions in cas_init_one().

Moshe Shemesh <moshe@mellanox.com>
    net/mlx5: Add command entry handling completion

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
    net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()

Moshe Shemesh <moshe@mellanox.com>
    net/mlx5e: Update netdev txq on completions during closure

Jere Leppänen <jere.leppanen@nokia.com>
    sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed

Roman Mashak <mrv@mojatatu.com>
    net sched: fix reporting the first-time use timestamp

Yuqi Jin <jinyuqi@huawei.com>
    net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"

Vadim Fedorenko <vfedorenko@novek.ru>
    net: ipip: fix wrong address family in init error path

Eric Dumazet <edumazet@google.com>
    ax25: fix setsockopt(SO_BINDTODEVICE)


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/imx6q-b450v3.dts                 |   7 --
 arch/arm/boot/dts/imx6q-b650v3.dts                 |   7 --
 arch/arm/boot/dts/imx6q-b850v3.dts                 |  11 --
 arch/arm/boot/dts/imx6q-bx50v3.dtsi                |  77 ++++++++++++++
 arch/arm/include/asm/assembler.h                   |  83 +--------------
 arch/arm/include/asm/uaccess-asm.h                 | 117 +++++++++++++++++++++
 arch/arm/include/asm/vfpmacros.h                   |   8 +-
 arch/arm/kernel/entry-armv.S                       |  11 +-
 arch/arm/kernel/entry-header.S                     |   9 +-
 arch/arm/lib/bitops.h                              |   8 +-
 arch/parisc/mm/init.c                              |   2 +-
 arch/x86/include/asm/dma.h                         |   2 +-
 drivers/gpio/gpio-tegra.c                          |   1 +
 drivers/infiniband/hw/qib/qib_sysfs.c              |   9 +-
 drivers/input/evdev.c                              |  19 +---
 drivers/input/joystick/xpad.c                      |  12 +++
 drivers/input/rmi4/rmi_driver.c                    |   3 +-
 drivers/input/serio/i8042-x86ia64io.h              |   7 ++
 drivers/input/touchscreen/usbtouchscreen.c         |   1 +
 drivers/iommu/iommu.c                              |   2 +-
 drivers/net/bonding/bond_sysfs_slave.c             |   4 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c |   3 +
 drivers/net/ethernet/mellanox/mlx4/fw.c            |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  15 +++
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |   6 +-
 drivers/net/ethernet/microchip/encx24j600.c        |   5 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |   4 +-
 drivers/net/ethernet/sun/cassini.c                 |   3 +-
 drivers/tty/serial/sc16is7xx.c                     |   2 +
 drivers/usb/gadget/legacy/inode.c                  |   3 +-
 fs/binfmt_elf.c                                    |   2 +-
 fs/cachefiles/rdwr.c                               |   2 +-
 fs/cifs/file.c                                     |   2 +-
 fs/gfs2/quota.c                                    |   6 +-
 fs/gfs2/quota.h                                    |   3 +-
 include/asm-generic/topology.h                     |   2 +-
 include/linux/mlx5/driver.h                        |   1 +
 include/linux/mm.h                                 |  15 ++-
 include/linux/netfilter/nf_conntrack_pptp.h        |   2 +-
 include/net/act_api.h                              |   3 +-
 include/rdma/ib_addr.h                             |   6 +-
 include/uapi/linux/l2tp.h                          |   7 +-
 kernel/irq/migration.c                             |  26 +++--
 mm/vmalloc.c                                       |   2 +-
 net/ax25/af_ax25.c                                 |   6 +-
 net/bridge/netfilter/nft_reject_bridge.c           |   6 ++
 net/ceph/osd_client.c                              |   4 +-
 net/core/rtnetlink.c                               |   2 +-
 net/ipv4/ip_vti.c                                  |  75 +++++++------
 net/ipv4/ipip.c                                    |   2 +-
 net/ipv4/netfilter/nf_nat_pptp.c                   |   7 +-
 net/ipv4/route.c                                   |  14 ++-
 net/mac80211/mesh_hwmp.c                           |   7 ++
 net/netfilter/ipset/ip_set_list_set.c              |   2 +-
 net/netfilter/nf_conntrack_pptp.c                  |  62 ++++++-----
 net/qrtr/qrtr.c                                    |   2 +-
 net/sctp/sm_statefuns.c                            |   9 +-
 net/xfrm/xfrm_input.c                              |   2 +-
 net/xfrm/xfrm_output.c                             |   3 +-
 net/xfrm/xfrm_policy.c                             |   7 +-
 security/commoncap.c                               |   1 +
 sound/core/hwdep.c                                 |   4 +-
 sound/usb/mixer.c                                  |   8 ++
 64 files changed, 466 insertions(+), 283 deletions(-)

[PATCH 4.9 01/61] ax25: fix setsockopt(SO_BINDTODEVICE)

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 687775cec056b38a4c8f3291e0dd7a9145f7b667 ]

syzbot was able to trigger this trace [1], probably by using
a zero optlen.

While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ.

[1]
BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569
CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 strnlen+0xf9/0x170 lib/string.c:569
 dev_name_hash net/core/dev.c:207 [inline]
 netdev_name_node_lookup net/core/dev.c:277 [inline]
 __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778
 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654
 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403
 __do_compat_sys_setsockopt net/compat.c:413 [inline]
 __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410
 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f57dd9
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101
RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004
RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Local variable ----devname@ax25_setsockopt created at:
 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -639,8 +639,10 @@ static int ax25_setsockopt(struct socket
 		break;
 
 	case SO_BINDTODEVICE:
-		if (optlen > IFNAMSIZ)
-			optlen = IFNAMSIZ;
+		if (optlen > IFNAMSIZ - 1)
+			optlen = IFNAMSIZ - 1;
+
+		memset(devname, 0, sizeof(devname));
 
 		if (copy_from_user(devname, optval, optlen)) {
 			res = -EFAULT;

[PATCH 4.9 02/61] net: ipip: fix wrong address family in init error path

[Greg Kroah-Hartman]

From: Vadim Fedorenko <vfedorenko@novek.ru>

[ Upstream commit 57ebc8f08504f176eb0f25b3e0fde517dec61a4f ]

In case of error with MPLS support the code is misusing AF_INET
instead of AF_MPLS.

Fixes: 1b69e7e6c4da ("ipip: support MPLS over IPv4")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ipip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -689,7 +689,7 @@ out:
 
 rtnl_link_failed:
 #if IS_ENABLED(CONFIG_MPLS)
-	xfrm4_tunnel_deregister(&mplsip_handler, AF_INET);
+	xfrm4_tunnel_deregister(&mplsip_handler, AF_MPLS);
 xfrm_tunnel_mplsip_failed:
 
 #endif

[PATCH 4.9 03/61] net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"

[Greg Kroah-Hartman]

From: Yuqi Jin <jinyuqi@huawei.com>

[ Upstream commit a6211caa634da39d861a47437ffcda8b38ef421b ]

Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()")
used atomic_cmpxchg to replace "atomic_add_return" inside the function
"ip_idents_reserve". The reason was to avoid UBSAN warning.
However, this change has caused performance degrade and in GCC-8,
fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer
and signed integer overflow is now undefined by default at all
optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv
/-fno-strict-overflow, so Let's revert it safely.

[1] https://gcc.gnu.org/gcc-8/changes.html

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiong Wang <jiongwang@huawei.com>
Signed-off-by: Yuqi Jin <jinyuqi@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -477,18 +477,16 @@ u32 ip_idents_reserve(u32 hash, int segs
 	atomic_t *p_id = ip_idents + hash % IP_IDENTS_SZ;
 	u32 old = ACCESS_ONCE(*p_tstamp);
 	u32 now = (u32)jiffies;
-	u32 new, delta = 0;
+	u32 delta = 0;
 
 	if (old != now && cmpxchg(p_tstamp, old, now) == old)
 		delta = prandom_u32_max(now - old);
 
-	/* Do not use atomic_add_return() as it makes UBSAN unhappy */
-	do {
-		old = (u32)atomic_read(p_id);
-		new = old + delta + segs;
-	} while (atomic_cmpxchg(p_id, old, new) != old);
-
-	return new - segs;
+	/* If UBSAN reports an error there, please make sure your compiler
+	 * supports -fno-strict-overflow before reporting it that was a bug
+	 * in UBSAN, and it has been fixed in GCC-8.
+	 */
+	return atomic_add_return(segs + delta, p_id) - segs;
 }
 EXPORT_SYMBOL(ip_idents_reserve);
 

[PATCH 4.9 04/61] net sched: fix reporting the first-time use timestamp

[Greg Kroah-Hartman]

From: Roman Mashak <mrv@mojatatu.com>

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/act_api.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/include/net/act_api.h
+++ b/include/net/act_api.h
@@ -94,7 +94,8 @@ static inline void tcf_tm_dump(struct tc
 {
 	dtm->install = jiffies_to_clock_t(jiffies - stm->install);
 	dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse);
-	dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse);
+	dtm->firstuse = stm->firstuse ?
+		jiffies_to_clock_t(jiffies - stm->firstuse) : 0;
 	dtm->expires = jiffies_to_clock_t(stm->expires);
 }
 

[PATCH 4.9 05/61] sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2778 bytes --]

From: "Jere Leppänen" <jere.leppanen@nokia.com>

[ Upstream commit d3e8e4c11870413789f029a71e72ae6e971fe678 ]

Commit bdf6fa52f01b ("sctp: handle association restarts when the
socket is closed.") starts shutdown when an association is restarted,
if in SHUTDOWN-PENDING state and the socket is closed. However, the
rationale stated in that commit applies also when in SHUTDOWN-SENT
state - we don't want to move an association to ESTABLISHED state when
the socket has been closed, because that results in an association
that is unreachable from user space.

The problem scenario:

1.  Client crashes and/or restarts.

2.  Server (using one-to-one socket) calls close(). SHUTDOWN is lost.

3.  Client reconnects using the same addresses and ports.

4.  Server's association is restarted. The association and the socket
    move to ESTABLISHED state, even though the server process has
    closed its descriptor.

Also, after step 4 when the server process exits, some resources are
leaked in an attempt to release the underlying inet sock structure in
ESTABLISHED state:

    IPv4: Attempt to release TCP socket in state 1 00000000377288c7

Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if
an association is restarted in SHUTDOWN-SENT state and the socket is
closed, then start shutdown and don't move the association or the
socket to ESTABLISHED state.

Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_statefuns.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1793,12 +1793,13 @@ static sctp_disposition_t sctp_sf_do_dup
 	/* Update the content of current association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
 	sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
-	if (sctp_state(asoc, SHUTDOWN_PENDING) &&
+	if ((sctp_state(asoc, SHUTDOWN_PENDING) ||
+	     sctp_state(asoc, SHUTDOWN_SENT)) &&
 	    (sctp_sstate(asoc->base.sk, CLOSING) ||
 	     sock_flag(asoc->base.sk, SOCK_DEAD))) {
-		/* if were currently in SHUTDOWN_PENDING, but the socket
-		 * has been closed by user, don't transition to ESTABLISHED.
-		 * Instead trigger SHUTDOWN bundled with COOKIE_ACK.
+		/* If the socket has been closed by user, don't
+		 * transition to ESTABLISHED. Instead trigger SHUTDOWN
+		 * bundled with COOKIE_ACK.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
 		return sctp_sf_do_9_2_start_shutdown(net, ep, asoc,

[PATCH 4.9 06/61] net/mlx5e: Update netdev txq on completions during closure

[Greg Kroah-Hartman]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ]

On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.

Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -499,8 +499,9 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *c
 static void mlx5e_free_txq_sq_descs(struct mlx5e_sq *sq)
 {
 	struct mlx5e_tx_wqe_info *wi;
+	u32 nbytes = 0;
+	u16 ci, npkts = 0;
 	struct sk_buff *skb;
-	u16 ci;
 	int i;
 
 	while (sq->cc != sq->pc) {
@@ -521,8 +522,11 @@ static void mlx5e_free_txq_sq_descs(stru
 		}
 
 		dev_kfree_skb_any(skb);
+		npkts++;
+		nbytes += wi->num_bytes;
 		sq->cc += wi->num_wqebbs;
 	}
+	netdev_tx_completed_queue(sq->txq, npkts, nbytes);
 }
 
 static void mlx5e_free_xdp_sq_descs(struct mlx5e_sq *sq)

[PATCH 4.9 07/61] net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()

[Greg Kroah-Hartman]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

[ Upstream commit d28ea1fbbf437054ef339afec241019f2c4e2bb6 ]

Once the traversal of the list is completed with list_for_each_entry(),
the iterator (node) will point to an invalid object. So passing this to
qrtr_local_enqueue() which is outside of the iterator block is erroneous
eventhough the object is not used.

So fix this by passing NULL to qrtr_local_enqueue().

Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/qrtr/qrtr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -571,7 +571,7 @@ static int qrtr_bcast_enqueue(struct qrt
 	}
 	mutex_unlock(&qrtr_node_lock);
 
-	qrtr_local_enqueue(node, skb);
+	qrtr_local_enqueue(NULL, skb);
 
 	return 0;
 }

[PATCH 4.9 08/61] net/mlx5: Add command entry handling completion

[Greg Kroah-Hartman]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ]

When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |   15 +++++++++++++++
 include/linux/mlx5/driver.h                   |    1 +
 2 files changed, 16 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -786,6 +786,7 @@ static void cmd_work_handler(struct work
 	int alloc_ret;
 	int cmd_mode;
 
+	complete(&ent->handling);
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
 	if (!ent->page_queue) {
@@ -904,6 +905,12 @@ static int wait_func(struct mlx5_core_de
 	struct mlx5_cmd *cmd = &dev->cmd;
 	int err;
 
+	if (!wait_for_completion_timeout(&ent->handling, timeout) &&
+	    cancel_work_sync(&ent->work)) {
+		ent->ret = -ECANCELED;
+		goto out_err;
+	}
+
 	if (cmd->mode == CMD_MODE_POLLING) {
 		wait_for_completion(&ent->done);
 	} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
@@ -911,12 +918,17 @@ static int wait_func(struct mlx5_core_de
 		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 	}
 
+out_err:
 	err = ent->ret;
 
 	if (err == -ETIMEDOUT) {
 		mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
 			       mlx5_command_str(msg_to_opcode(ent->in)),
 			       msg_to_opcode(ent->in));
+	} else if (err == -ECANCELED) {
+		mlx5_core_warn(dev, "%s(0x%x) canceled on out of queue timeout.\n",
+			       mlx5_command_str(msg_to_opcode(ent->in)),
+			       msg_to_opcode(ent->in));
 	}
 	mlx5_core_dbg(dev, "err %d, delivery status %s(%d)\n",
 		      err, deliv_status_to_str(ent->status), ent->status);
@@ -951,6 +963,7 @@ static int mlx5_cmd_invoke(struct mlx5_c
 
 	ent->token = token;
 
+	init_completion(&ent->handling);
 	if (!callback)
 		init_completion(&ent->done);
 
@@ -970,6 +983,8 @@ static int mlx5_cmd_invoke(struct mlx5_c
 	err = wait_func(dev, ent);
 	if (err == -ETIMEDOUT)
 		goto out;
+	if (err == -ECANCELED)
+		goto out_free;
 
 	ds = ent->ts2 - ent->ts1;
 	op = MLX5_GET(mbox_in, in->first.data, opcode);
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -656,6 +656,7 @@ struct mlx5_cmd_work_ent {
 	struct delayed_work	cb_timeout_work;
 	void		       *context;
 	int			idx;
+	struct completion	handling;
 	struct completion	done;
 	struct mlx5_cmd        *cmd;
 	struct work_struct	work;

[PATCH 4.9 09/61] net: sun: fix missing release regions in cas_init_one().

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

commit 5a730153984dd13f82ffae93d7170d76eba204e9 upstream.

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".

Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/sun/cassini.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -4980,7 +4980,7 @@ static int cas_init_one(struct pci_dev *
 					  cas_cacheline_size)) {
 			dev_err(&pdev->dev, "Could not set PCI cache "
 			       "line size\n");
-			goto err_write_cacheline;
+			goto err_out_free_res;
 		}
 	}
 #endif
@@ -5151,7 +5151,6 @@ err_out_iounmap:
 err_out_free_res:
 	pci_release_regions(pdev);
 
-err_write_cacheline:
 	/* Try to restore it in case the error occurred after we
 	 * set it.
 	 */

[PATCH 4.9 10/61] net/mlx4_core: fix a memory leak bug.

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

commit febfd9d3c7f74063e8e630b15413ca91b567f963 upstream.

In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.

Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/mellanox/mlx4/fw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -2704,7 +2704,7 @@ void mlx4_opreq_action(struct work_struc
 		if (err) {
 			mlx4_err(dev, "Failed to retrieve required operation: %d\n",
 				 err);
-			return;
+			goto out;
 		}
 		MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET);
 		MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);

[PATCH 4.9 11/61] uapi: fix linux/if_pppol2tp.h userspace compilation errors

[Greg Kroah-Hartman]

From: Dmitry V. Levin <ldv@altlinux.org>

commit a725eb15db80643a160310ed6bcfd6c5a6c907f2 upstream.

Because of <linux/libc-compat.h> interface limitations, <netinet/in.h>
provided by libc cannot be included after <linux/in.h>, therefore any
header that includes <netinet/in.h> cannot be included after <linux/in.h>.

Change uapi/linux/l2tp.h, the last uapi header that includes
<netinet/in.h>, to include <linux/in.h> and <linux/in6.h> instead of
<netinet/in.h> and use __SOCK_SIZE__ instead of sizeof(struct sockaddr)
the same way as uapi/linux/in.h does, to fix linux/if_pppol2tp.h userspace
compilation errors like this:

In file included from /usr/include/linux/l2tp.h:12:0,
                 from /usr/include/linux/if_pppol2tp.h:21,
/usr/include/netinet/in.h:31:8: error: redefinition of 'struct in_addr'

Fixes: 47c3e7783be4 ("net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/l2tp.h |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/include/uapi/linux/l2tp.h
+++ b/include/uapi/linux/l2tp.h
@@ -9,9 +9,8 @@
 
 #include <linux/types.h>
 #include <linux/socket.h>
-#ifndef __KERNEL__
-#include <netinet/in.h>
-#endif
+#include <linux/in.h>
+#include <linux/in6.h>
 
 #define IPPROTO_L2TP		115
 
@@ -31,7 +30,7 @@ struct sockaddr_l2tpip {
 	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
 
 	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) -
+	unsigned char	__pad[__SOCK_SIZE__ -
 			      sizeof(__kernel_sa_family_t) -
 			      sizeof(__be16) - sizeof(struct in_addr) -
 			      sizeof(__u32)];

[PATCH 4.9 12/61] IB/cma: Fix reference count leak when no ipv4 addresses are set

[Greg Kroah-Hartman]

From: Kalderon, Michal <Michal.Kalderon@cavium.com>

commit 963916fdb3e5ad4af57ac959b5a03bf23f7568ca upstream.

Once in_dev_get is called to receive in_device pointer, the
in_device reference counter is increased, but if there are
no ipv4 addresses configured on the net-device the ifa_list
will be null, resulting in a flow that doesn't call in_dev_put
to decrease the ref_cnt.
This was exposed when running RoCE over ipv6 without any ipv4
addresses configured

Fixes: commit 8e3867310c90 ("IB/cma: Fix a race condition in iboe_addr_get_sgid()")

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/rdma/ib_addr.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -208,11 +208,13 @@ static inline void iboe_addr_get_sgid(st
 	dev = dev_get_by_index(&init_net, dev_addr->bound_dev_if);
 	if (dev) {
 		ip4 = in_dev_get(dev);
-		if (ip4 && ip4->ifa_list && ip4->ifa_list->ifa_address) {
+		if (ip4 && ip4->ifa_list && ip4->ifa_list->ifa_address)
 			ipv6_addr_set_v4mapped(ip4->ifa_list->ifa_address,
 					       (struct in6_addr *)gid);
+
+		if (ip4)
 			in_dev_put(ip4);
-		}
+
 		dev_put(dev);
 	}
 }

[PATCH 4.9 13/61] gpio: tegra: mask GPIO IRQs during IRQ shutdown

[Greg Kroah-Hartman]

From: Stephen Warren <swarren@nvidia.com>

[ Upstream commit 0cf253eed5d2bdf7bb3152457b38f39b012955f7 ]

The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ
client has released the GPIO IRQ. This allows the HW to raise IRQs, and
SW to process them, after shutdown. Fix this by masking the IRQ when it's
shut down. This is usually taken care of by the irqchip core, but since
this driver has a custom irq_shutdown implementation, it must do this
explicitly itself.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-tegra.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 05d3241ad20b..9d763557a105 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -341,6 +341,7 @@ static void tegra_gpio_irq_shutdown(struct irq_data *d)
 	struct tegra_gpio_info *tgi = bank->tgi;
 	int gpio = d->hwirq;
 
+	tegra_gpio_irq_mask(d);
 	gpiochip_unlock_as_irq(&tgi->gc, gpio);
 }
 
-- 
2.25.1

[PATCH 4.9 14/61] net: microchip: encx24j600: add missed kthread_stop

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ]

This driver calls kthread_run() in probe, but forgets to call
kthread_stop() in probe failure and remove.
Add the missed kthread_stop() to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/microchip/encx24j600.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/encx24j600.c b/drivers/net/ethernet/microchip/encx24j600.c
index b14f0305aa31..ad661d1979c7 100644
--- a/drivers/net/ethernet/microchip/encx24j600.c
+++ b/drivers/net/ethernet/microchip/encx24j600.c
@@ -1058,7 +1058,7 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 	if (unlikely(ret)) {
 		netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n",
 			  ret);
-		goto out_free;
+		goto out_stop;
 	}
 
 	eidled = encx24j600_read_reg(priv, EIDLED);
@@ -1076,6 +1076,8 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 
 out_unregister:
 	unregister_netdev(priv->ndev);
+out_stop:
+	kthread_stop(priv->kworker_task);
 out_free:
 	free_netdev(ndev);
 
@@ -1088,6 +1090,7 @@ static int encx24j600_spi_remove(struct spi_device *spi)
 	struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev);
 
 	unregister_netdev(priv->ndev);
+	kthread_stop(priv->kworker_task);
 
 	free_netdev(priv->ndev);
 
-- 
2.25.1

[PATCH 4.9 15/61] gfs2: move privileged user check to gfs2_quota_lock_check

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 4ed0c30811cb4d30ef89850b787a53a84d5d2bcb ]

Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.

This patch moves the check to gfs2_quota_lock_check.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/quota.c | 3 +--
 fs/gfs2/quota.h | 3 ++-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index c2ca9566b764..fb9b1d702351 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1039,8 +1039,7 @@ int gfs2_quota_lock(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)
 	u32 x;
 	int error = 0;
 
-	if (capable(CAP_SYS_RESOURCE) ||
-	    sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
+	if (sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
 		return 0;
 
 	error = gfs2_quota_hold(ip, uid, gid);
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 836f29480be6..e3a6e2404d11 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -47,7 +47,8 @@ static inline int gfs2_quota_lock_check(struct gfs2_inode *ip,
 	int ret;
 
 	ap->allowed = UINT_MAX; /* Assume we are permitted a whole lot */
-	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
+	if (capable(CAP_SYS_RESOURCE) ||
+	    sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 	ret = gfs2_quota_lock(ip, NO_UID_QUOTA_CHANGE, NO_GID_QUOTA_CHANGE);
 	if (ret)
-- 
2.25.1

[PATCH 4.9 16/61] gfs2: dont call quota_unhold if quotas are not locked

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit c9cb9e381985bbbe8acd2695bbe6bd24bf06b81c ]

Before this patch, function gfs2_quota_unlock checked if quotas are
turned off, and if so, it branched to label out, which called
gfs2_quota_unhold. With the new system of gfs2_qa_get and put, we
no longer want to call gfs2_quota_unhold or we won't balance our
gets and puts.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/quota.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index fb9b1d702351..fb2e0ad945bf 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1112,7 +1112,7 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 	int found;
 
 	if (!test_and_clear_bit(GIF_QD_LOCKED, &ip->i_flags))
-		goto out;
+		return;
 
 	for (x = 0; x < ip->i_qadata->qa_qd_num; x++) {
 		struct gfs2_quota_data *qd;
@@ -1149,7 +1149,6 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 			qd_unlock(qda[x]);
 	}
 
-out:
 	gfs2_quota_unhold(ip);
 }
 
-- 
2.25.1

[PATCH 4.9 17/61] cachefiles: Fix race between read_waiter and read_copier involving op->to_do

[Greg Kroah-Hartman]

From: Lei Xue <carmark.dlut@gmail.com>

[ Upstream commit 7bb0c5338436dae953622470d52689265867f032 ]

There is a potential race in fscache operation enqueuing for reading and
copying multiple pages from cachefiles to netfs.  The problem can be seen
easily on a heavy loaded system (for example many processes reading files
continually on an NFS share covered by fscache triggered this problem within
a few minutes).

The race is due to cachefiles_read_waiter() adding the op to the monitor
to_do list and then then drop the object->work_lock spinlock before
completing fscache_enqueue_operation().  Once the lock is dropped,
cachefiles_read_copier() grabs the op, completes processing it, and
makes it through fscache_retrieval_complete() which sets the op->state to
the final state of FSCACHE_OP_ST_COMPLETE(4).  When cachefiles_read_waiter()
finally gets through the remainder of fscache_enqueue_operation()
it sees the invalid state, and hits the ASSERTCMP and the following
oops is seen:
[ 2259.612361] FS-Cache:
[ 2259.614785] FS-Cache: Assertion failed
[ 2259.618639] FS-Cache: 4 == 5 is false
[ 2259.622456] ------------[ cut here ]------------
[ 2259.627190] kernel BUG at fs/fscache/operation.c:70!
...
[ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>]  [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache]
[ 2259.802059] RSP: 0000:ffffa0263d543be0  EFLAGS: 00010046
[ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006
[ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890
[ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708
[ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480
[ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10
[ 2259.859554] FS:  00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000
[ 2259.875571] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0
[ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2259.933449] PKRU: 55555554
[ 2259.943654] Call Trace:
[ 2259.953592]  <IRQ>
[ 2259.955577]  [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles]
[ 2259.978039]  [<ffffffffa34d3942>] __wake_up_common+0x82/0x120
[ 2259.991392]  [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0
[ 2260.004930]  [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20
[ 2260.017863]  [<ffffffffa34d3ab3>] __wake_up+0x13/0x20
[ 2260.030230]  [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70
[ 2260.042535]  [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30
[ 2260.054495]  [<ffffffffa35bdd09>] page_endio+0x29/0x90
[ 2260.066184]  [<ffffffffa368fc81>] mpage_end_io+0x51/0x80

CPU1
cachefiles_read_waiter()
 20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
 21                                   int sync, void *_key)
 22 {
...
 61         spin_lock(&object->work_lock);
 62         list_add_tail(&monitor->op_link, &op->to_do);
 63         spin_unlock(&object->work_lock);
<begin race window>
 64
 65         fscache_enqueue_retrieval(op);
182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
183 {
184         fscache_enqueue_operation(&op->op);
185 }
 58 void fscache_enqueue_operation(struct fscache_operation *op)
 59 {
 60         struct fscache_cookie *cookie = op->object->cookie;
 61
 62         _enter("{OBJ%x OP%x,%u}",
 63                op->object->debug_id, op->debug_id, atomic_read(&op->usage));
 64
 65         ASSERT(list_empty(&op->pend_link));
 66         ASSERT(op->processor != NULL);
 67         ASSERT(fscache_object_is_available(op->object));
 68         ASSERTCMP(atomic_read(&op->usage), >, 0);
<end race window>

CPU2
cachefiles_read_copier()
168         while (!list_empty(&op->to_do)) {
...
202                 fscache_end_io(op, monitor->netfs_page, error);
203                 put_page(monitor->netfs_page);
204                 fscache_retrieval_complete(op, 1);

CPU1
 58 void fscache_enqueue_operation(struct fscache_operation *op)
 59 {
...
 69         ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS,
 70                     op->state, ==,  FSCACHE_OP_ST_CANCELLED);

Signed-off-by: Lei Xue <carmark.dlut@gmail.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cachefiles/rdwr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 799b59d96fe2..7dba96d5fef1 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -64,9 +64,9 @@ static int cachefiles_read_waiter(wait_queue_t *wait, unsigned mode,
 	object = container_of(op->op.object, struct cachefiles_object, fscache);
 	spin_lock(&object->work_lock);
 	list_add_tail(&monitor->op_link, &op->to_do);
+	fscache_enqueue_retrieval(op);
 	spin_unlock(&object->work_lock);
 
-	fscache_enqueue_retrieval(op);
 	fscache_put_retrieval(op);
 	return 0;
 }
-- 
2.25.1

[PATCH 4.9 18/61] usb: gadget: legacy: fix redundant initialization warnings

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit d13cce757954fa663c69845611957396843ed87a ]

Fix the following cppcheck warnings:

drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
 int    value = -EOPNOTSUPP;
              ^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
 value = -EINVAL;
       ^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
 ssize_t   value = len, length = len;
                 ^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
 value = -EINVAL;
       ^
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/legacy/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index b8534d3f8bb0..cb02e9ecd8e7 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1364,7 +1364,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 	req->buf = dev->rbuf;
 	req->context = NULL;
-	value = -EOPNOTSUPP;
 	switch (ctrl->bRequest) {
 
 	case USB_REQ_GET_DESCRIPTOR:
@@ -1788,7 +1787,7 @@ static ssize_t
 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct dev_data		*dev = fd->private_data;
-	ssize_t			value = len, length = len;
+	ssize_t			value, length = len;
 	unsigned		total;
 	u32			tag;
 	char			*kbuf;
-- 
2.25.1

[PATCH 4.9 19/61] cifs: Fix null pointer check in cifs_read

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 9bd21d4b1a767c3abebec203342f3820dcb84662 ]

Coverity scan noted a redundant null check

Coverity-id: 728517
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 09d83275c20b..b2919166855f 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3293,7 +3293,7 @@ cifs_read(struct file *file, char *read_data, size_t read_size, loff_t *offset)
 			 * than it negotiated since it will refuse the read
 			 * then.
 			 */
-			if ((tcon->ses) && !(tcon->ses->capabilities &
+			if (!(tcon->ses->capabilities &
 				tcon->ses->server->vals->cap_large_files)) {
 				current_read_size = min_t(uint,
 					current_read_size, CIFSMaxBufSize);
-- 
2.25.1

[PATCH 4.9 20/61] Input: usbtouchscreen - add support for BonXeon TP

[Greg Kroah-Hartman]

From: James Hilliard <james.hilliard1@gmail.com>

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ]

Based on available information this uses the singletouch irtouch
protocol. This is tested and confirmed to be fully functional on
the BonXeon TP hardware I have.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/usbtouchscreen.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 2c41107240de..499402a975b3 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -197,6 +197,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	{USB_DEVICE(0x255e, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
-- 
2.25.1

[PATCH 4.9 21/61] Input: i8042 - add ThinkPad S230u to i8042 nomux list

[Greg Kroah-Hartman]

From: Kevin Locke <kevin@kevinlocke.name>

[ Upstream commit 18931506465a762ffd3f4803d36a18d336a67da9 ]

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version
"GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode
the keyboard, Synaptics TouchPad, and TrackPoint either do not function
or stop functioning a few minutes after boot.  This problem has been
noted before, perhaps only occurring on BIOS 1.57 and
later.[1][2][3][4][5]

This model does not have an external PS/2 port, so mux does not appear
to be useful.

Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago
and although the [BIOS changelog] notes "Fixed an issue of UEFI
touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be
insufficient.

Adding 33474HU to the nomux list avoids the issue on my system.

[1]: https://bugs.launchpad.net/bugs/1210748
[2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425
[3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200
[4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115
[5]: https://forums.lenovo.com/topic/findpost/27/1337119
[BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt

Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/feb8a8339a67025dab3850e6377eb6f3a0e782ba.1587400635.git.kevin@kevinlocke.name
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a4e76084a2af..42330024da2f 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -545,6 +545,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+	},
 	{ }
 };
 
-- 
2.25.1

[PATCH 4.9 22/61] Input: evdev - call input_flush_device() on release(), not flush()

[Greg Kroah-Hartman]

From: Brendan Shanks <bshanks@codeweavers.com>

[ Upstream commit 09264098ff153f60866039d60b31d39b66f55a31 ]

input_flush_device() should only be called once the struct file is being
released and no open descriptors remain, but evdev_flush() was calling
it whenever a file descriptor was closed.

This caused uploaded force-feedback effects to be erased when a process
did a dup()/close() on the event FD, called system(), etc.

Call input_flush_device() from evdev_release() instead.

Reported-by: Mathieu Maret <mathieu.maret@gmail.com>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/evdev.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index e9ae3d500a55..700f018df668 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -342,20 +342,6 @@ static int evdev_fasync(int fd, struct file *file, int on)
 	return fasync_helper(fd, file, on, &client->fasync);
 }
 
-static int evdev_flush(struct file *file, fl_owner_t id)
-{
-	struct evdev_client *client = file->private_data;
-	struct evdev *evdev = client->evdev;
-
-	mutex_lock(&evdev->mutex);
-
-	if (evdev->exist && !client->revoked)
-		input_flush_device(&evdev->handle, file);
-
-	mutex_unlock(&evdev->mutex);
-	return 0;
-}
-
 static void evdev_free(struct device *dev)
 {
 	struct evdev *evdev = container_of(dev, struct evdev, dev);
@@ -469,6 +455,10 @@ static int evdev_release(struct inode *inode, struct file *file)
 	unsigned int i;
 
 	mutex_lock(&evdev->mutex);
+
+	if (evdev->exist && !client->revoked)
+		input_flush_device(&evdev->handle, file);
+
 	evdev_ungrab(evdev, client);
 	mutex_unlock(&evdev->mutex);
 
@@ -1331,7 +1321,6 @@ static const struct file_operations evdev_fops = {
 	.compat_ioctl	= evdev_ioctl_compat,
 #endif
 	.fasync		= evdev_fasync,
-	.flush		= evdev_flush,
 	.llseek		= no_llseek,
 };
 
-- 
2.25.1

[PATCH 4.9 23/61] Input: xpad - add custom init packet for Xbox One S controllers

[Greg Kroah-Hartman]

From: Łukasz Patron <priv.luk@gmail.com>

[ Upstream commit 764f7f911bf72450c51eb74cbb262ad9933741d8 ]

Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers
fixes an issue where controller is stuck in Bluetooth mode and not sending
any inputs.

Signed-off-by: Łukasz Patron <priv.luk@gmail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 26476a64e663..54a6691d7d87 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -475,6 +475,16 @@ static const u8 xboxone_fw2015_init[] = {
 	0x05, 0x20, 0x00, 0x01, 0x00
 };
 
+/*
+ * This packet is required for Xbox One S (0x045e:0x02ea)
+ * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to
+ * initialize the controller that was previously used in
+ * Bluetooth mode.
+ */
+static const u8 xboxone_s_init[] = {
+	0x05, 0x20, 0x00, 0x0f, 0x06
+};
+
 /*
  * This packet is required for the Titanfall 2 Xbox One pads
  * (0x0e6f:0x0165) to finish initialization and for Hori pads
@@ -533,6 +543,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
 	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+	XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
+	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
-- 
2.25.1

[PATCH 4.9 24/61] Input: i8042 - add ThinkPad S230u to i8042 reset list

[Greg Kroah-Hartman]

From: Kevin Locke <kevin@kevinlocke.name>

[ Upstream commit 2712c91a54a1058d55c284152b4d93c979b67be6 ]

On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version
"GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and
TrackPoint either do not function or stop functioning a few minutes
after boot.  This problem has been noted before, perhaps only occurring
with BIOS 1.57 and later.[1][2][3][4][5]

Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago
and although the [BIOS changelog] notes "Fixed an issue of UEFI
touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be
insufficient.

Setting i8042.reset=1 or adding 33474HU to the reset list avoids the
issue on my system from either warm or cold boot.

[1]: https://bugs.launchpad.net/bugs/1210748
[2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425
[3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200
[4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115
[5]: https://forums.lenovo.com/topic/findpost/27/1337119
[BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt

Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 42330024da2f..d15fd73dbd80 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -745,6 +745,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
 		},
 	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+	},
 	{ }
 };
 
-- 
2.25.1

[PATCH 4.9 25/61] Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 5caab2da63207d6d631007f592f5219459e3454d ]

Fix to return a negative error code from the input_register_device()
error handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/rmi4/rmi_driver.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 65038dcc7613..677edbf870a7 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -991,7 +991,8 @@ static int rmi_driver_probe(struct device *dev)
 	if (data->input) {
 		rmi_driver_set_input_name(rmi_dev, data->input);
 		if (!rmi_dev->xport->input) {
-			if (input_register_device(data->input)) {
+			retval = input_register_device(data->input);
+			if (retval) {
 				dev_err(dev, "%s: Failed to register input device.\n",
 					__func__);
 				goto err_destroy_functions;
-- 
2.25.1

[PATCH 4.9 26/61] ARM: 8843/1: use unified assembler in headers

[Greg Kroah-Hartman]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit c001899a5d6c2d7a0f3b75b2307ddef137fb46a6 ]

Use unified assembler syntax (UAL) in headers. Divided syntax is
considered deprecated. This will also allow to build the kernel
using LLVM's integrated assembler.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/assembler.h | 12 ++++++------
 arch/arm/include/asm/vfpmacros.h |  8 ++++----
 arch/arm/lib/bitops.h            |  8 ++++----
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 7d727506096f..c9ed0b0e0737 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -372,9 +372,9 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
 9999:
 	.if	\inc == 1
-	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
+	\instr\()b\t\cond\().w \reg, [\ptr, #\off]
 	.elseif	\inc == 4
-	\instr\cond\()\t\().w \reg, [\ptr, #\off]
+	\instr\t\cond\().w \reg, [\ptr, #\off]
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif
@@ -413,9 +413,9 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.rept	\rept
 9999:
 	.if	\inc == 1
-	\instr\cond\()b\()\t \reg, [\ptr], #\inc
+	\instr\()b\t\cond \reg, [\ptr], #\inc
 	.elseif	\inc == 4
-	\instr\cond\()\t \reg, [\ptr], #\inc
+	\instr\t\cond \reg, [\ptr], #\inc
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif
@@ -456,7 +456,7 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
 #ifndef CONFIG_CPU_USE_DOMAINS
 	adds	\tmp, \addr, #\size - 1
-	sbcccs	\tmp, \tmp, \limit
+	sbcscc	\tmp, \tmp, \limit
 	bcs	\bad
 #ifdef CONFIG_CPU_SPECTRE
 	movcs	\addr, #0
@@ -470,7 +470,7 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	sub	\tmp, \limit, #1
 	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
 	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
-	subhss	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
+	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
 	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
 	csdb
 #endif
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 301c1db3e99b..66748c04aed2 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -28,13 +28,13 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPD32
-	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	ldclne	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	ldcleq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
 #endif
@@ -52,13 +52,13 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPD32
-	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	stclne	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	stcleq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
 #endif
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 7d807cfd8ef5..d9c32b822eda 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -6,7 +6,7 @@
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
+	strbne	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
 	and	r3, r0, #31		@ Get bit offset
 	mov	r0, r0, lsr #5
@@ -31,7 +31,7 @@ ENDPROC(\name		)
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
+	strbne	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
 	and	r3, r0, #31		@ Get bit offset
 	mov	r0, r0, lsr #5
@@ -61,7 +61,7 @@ ENDPROC(\name		)
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
+	strbne	r1, [ip]		@ assert word-aligned
 	and	r2, r0, #31
 	mov	r0, r0, lsr #5
 	mov	r3, #1
@@ -88,7 +88,7 @@ ENDPROC(\name		)
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
+	strbne	r1, [ip]		@ assert word-aligned
 	and	r3, r0, #31
 	mov	r0, r0, lsr #5
 	save_and_disable_irqs ip
-- 
2.25.1

[PATCH 4.9 27/61] ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 747ffc2fcf969eff9309d7f2d1d61cb8b9e1bb40 ]

Consolidate the user access assembly code to asm/uaccess-asm.h.  This
moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable,
uaccess_disable, uaccess_save, uaccess_restore macros, and creates two
new ones for exception entry and exit - uaccess_entry and uaccess_exit.

This makes the uaccess_save and uaccess_restore macros private to
asm/uaccess-asm.h.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/assembler.h   |  75 +-------------------
 arch/arm/include/asm/uaccess-asm.h | 106 +++++++++++++++++++++++++++++
 arch/arm/kernel/entry-armv.S       |  11 +--
 arch/arm/kernel/entry-header.S     |   9 +--
 4 files changed, 112 insertions(+), 89 deletions(-)
 create mode 100644 arch/arm/include/asm/uaccess-asm.h

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index c9ed0b0e0737..1cd39b1229eb 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -21,11 +21,11 @@
 #endif
 
 #include <asm/ptrace.h>
-#include <asm/domain.h>
 #include <asm/opcodes-virt.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 
 #define IOMEM(x)	(x)
 
@@ -445,79 +445,6 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.size \name , . - \name
 	.endm
 
-	.macro	csdb
-#ifdef CONFIG_THUMB2_KERNEL
-	.inst.w	0xf3af8014
-#else
-	.inst	0xe320f014
-#endif
-	.endm
-
-	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
-#ifndef CONFIG_CPU_USE_DOMAINS
-	adds	\tmp, \addr, #\size - 1
-	sbcscc	\tmp, \tmp, \limit
-	bcs	\bad
-#ifdef CONFIG_CPU_SPECTRE
-	movcs	\addr, #0
-	csdb
-#endif
-#endif
-	.endm
-
-	.macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
-#ifdef CONFIG_CPU_SPECTRE
-	sub	\tmp, \limit, #1
-	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
-	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
-	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
-	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
-	csdb
-#endif
-	.endm
-
-	.macro	uaccess_disable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_DISABLE
-	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_enable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_ENABLE
-	mcr	p15, 0, \tmp, c3, c0, 0
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_save, tmp
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	mrc	p15, 0, \tmp, c3, c0, 0
-	str	\tmp, [sp, #SVC_DACR]
-#endif
-	.endm
-
-	.macro	uaccess_restore
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	ldr	r0, [sp, #SVC_DACR]
-	mcr	p15, 0, r0, c3, c0, 0
-#endif
-	.endm
-
 	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
 	.macro	ret\c, reg
 #if __LINUX_ARM_ARCH__ < 6
diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
new file mode 100644
index 000000000000..d475e3e8145d
--- /dev/null
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_UACCESS_ASM_H__
+#define __ASM_UACCESS_ASM_H__
+
+#include <asm/asm-offsets.h>
+#include <asm/domain.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+
+	.macro	csdb
+#ifdef CONFIG_THUMB2_KERNEL
+	.inst.w	0xf3af8014
+#else
+	.inst	0xe320f014
+#endif
+	.endm
+
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcscc	\tmp, \tmp, \limit
+	bcs	\bad
+#ifdef CONFIG_CPU_SPECTRE
+	movcs	\addr, #0
+	csdb
+#endif
+#endif
+	.endm
+
+	.macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
+#ifdef CONFIG_CPU_SPECTRE
+	sub	\tmp, \limit, #1
+	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
+	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
+	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
+	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
+	csdb
+#endif
+	.endm
+
+	.macro	uaccess_disable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+	.macro	uaccess_enable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_ENABLE
+	mcr	p15, 0, \tmp, c3, c0, 0
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+	.macro	uaccess_save, tmp
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	mrc	p15, 0, \tmp, c3, c0, 0
+	str	\tmp, [sp, #SVC_DACR]
+#endif
+	.endm
+
+	.macro	uaccess_restore
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	ldr	r0, [sp, #SVC_DACR]
+	mcr	p15, 0, r0, c3, c0, 0
+#endif
+	.endm
+
+	/*
+	 * Save the address limit on entry to a privileged exception and
+	 * if using PAN, save and disable usermode access.
+	 */
+	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
+	ldr	\tmp0, [\tsk, #TI_ADDR_LIMIT]
+	mov	\tmp1, #TASK_SIZE
+	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+	str	\tmp0, [sp, #SVC_ADDR_LIMIT]
+	uaccess_save \tmp0
+	.if \disable
+	uaccess_disable \tmp0
+	.endif
+	.endm
+
+	/* Restore the user access state previously saved by uaccess_entry */
+	.macro	uaccess_exit, tsk, tmp0, tmp1
+	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
+	uaccess_restore
+	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+	.endm
+
+#endif /* __ASM_UACCESS_ASM_H__ */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9f157e7c51e7..efffca3c66e7 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -30,6 +30,7 @@
 #include <asm/unistd.h>
 #include <asm/tls.h>
 #include <asm/system_info.h>
+#include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
 #include <asm/entry-macro-multi.S>
@@ -186,15 +187,7 @@ ENDPROC(__und_invalid)
 	stmia	r7, {r2 - r6}
 
 	get_thread_info tsk
-	ldr	r0, [tsk, #TI_ADDR_LIMIT]
-	mov	r1, #TASK_SIZE
-	str	r1, [tsk, #TI_ADDR_LIMIT]
-	str	r0, [sp, #SVC_ADDR_LIMIT]
-
-	uaccess_save r0
-	.if \uaccess
-	uaccess_disable r0
-	.endif
+	uaccess_entry tsk, r0, r1, r2, \uaccess
 
 	.if \trace
 #ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index fa7c6e5c17e7..f9287e65722e 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -5,6 +5,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/errno.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 #include <asm/v7m.h>
 
 @ Bad Abort numbers
@@ -215,9 +216,7 @@
 	blne	trace_hardirqs_off
 #endif
 	.endif
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode SVC restore
@@ -261,9 +260,7 @@
 	@ on the stack remains correct).
 	@
 	.macro  svc_exit_via_fiq
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode restore
 	mov	r0, sp
-- 
2.25.1

[PATCH 4.9 28/61] ARM: uaccess: integrate uaccess_save and uaccess_restore

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 8ede890b0bcebe8c760aacfe20e934d98c3dc6aa ]

Integrate uaccess_save / uaccess_restore macros into the new
uaccess_entry / uaccess_exit macros respectively.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/uaccess-asm.h | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
index d475e3e8145d..e46468b91eaa 100644
--- a/arch/arm/include/asm/uaccess-asm.h
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -67,30 +67,23 @@
 #endif
 	.endm
 
-	.macro	uaccess_save, tmp
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	mrc	p15, 0, \tmp, c3, c0, 0
-	str	\tmp, [sp, #SVC_DACR]
-#endif
-	.endm
-
-	.macro	uaccess_restore
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	ldr	r0, [sp, #SVC_DACR]
-	mcr	p15, 0, r0, c3, c0, 0
+#define DACR(x...)	x
+#else
+#define DACR(x...)
 #endif
-	.endm
 
 	/*
 	 * Save the address limit on entry to a privileged exception and
 	 * if using PAN, save and disable usermode access.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
-	ldr	\tmp0, [\tsk, #TI_ADDR_LIMIT]
-	mov	\tmp1, #TASK_SIZE
-	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
-	str	\tmp0, [sp, #SVC_ADDR_LIMIT]
-	uaccess_save \tmp0
+	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+	mov	\tmp2, #TASK_SIZE
+	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
+ DACR(	str	\tmp0, [sp, #SVC_DACR])
+	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
 	.if \disable
 	uaccess_disable \tmp0
 	.endif
@@ -99,8 +92,11 @@
 	/* Restore the user access state previously saved by uaccess_entry */
 	.macro	uaccess_exit, tsk, tmp0, tmp1
 	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
+ DACR(	ldr	\tmp0, [sp, #SVC_DACR])
 	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
 	.endm
 
+#undef DACR
+
 #endif /* __ASM_UACCESS_ASM_H__ */
-- 
2.25.1

[PATCH 4.9 29/61] ARM: uaccess: fix DACR mismatch with nested exceptions

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 71f8af1110101facfad68989ff91f88f8e2c3e22 ]

Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ)
fails to fix up alignment faults, eventually resulting in a kernel
oops.

The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit
e6978e4bf181 ("ARM: save and reset the address limit when entering an
exception").  This is because the address limit is set back to
TASK_SIZE on exception entry, and, although it is restored on exception
exit, the domain register is not.

Hence, this sequence can occur:

  interrupt
    pt_regs->addr_limit = addr_limit		// USER_DS
    addr_limit = USER_DS
    alignment exception
    __probe_kernel_read()
      old_fs = get_fs()				// USER_DS
      set_fs(KERNEL_DS)
        addr_limit = KERNEL_DS
        dacr.kernel = DOMAIN_MANAGER
        interrupt
          pt_regs->addr_limit = addr_limit	// KERNEL_DS
          addr_limit = USER_DS
          alignment exception
          __probe_kernel_read()
            old_fs = get_fs()			// USER_DS
            set_fs(KERNEL_DS)
              addr_limit = KERNEL_DS
              dacr.kernel = DOMAIN_MANAGER
            ...
            set_fs(old_fs)
              addr_limit = USER_DS
              dacr.kernel = DOMAIN_CLIENT
          ...
          addr_limit = pt_regs->addr_limit	// KERNEL_DS
        interrupt returns

At this point, addr_limit is correctly restored to KERNEL_DS for
__probe_kernel_read() to continue execution, but dacr.kernel is not,
it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT.

This would not have happened prior to the mentioned commit, because
addr_limit would remain KERNEL_DS, so get_fs() would have returned
KERNEL_DS, and so would correctly nest.

This commit fixes the problem by also saving the DACR on exception
entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are
enabled, and resetting the DACR appropriately on exception entry to
match addr_limit and PAN settings.

Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception")
Reported-by: Tomas Paukrt <tomas.paukrt@advantech.cz>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/uaccess-asm.h | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
index e46468b91eaa..907571fd05c6 100644
--- a/arch/arm/include/asm/uaccess-asm.h
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -67,15 +67,21 @@
 #endif
 	.endm
 
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS)
 #define DACR(x...)	x
 #else
 #define DACR(x...)
 #endif
 
 	/*
-	 * Save the address limit on entry to a privileged exception and
-	 * if using PAN, save and disable usermode access.
+	 * Save the address limit on entry to a privileged exception.
+	 *
+	 * If we are using the DACR for kernel access by the user accessors
+	 * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain
+	 * back to client mode, whether or not \disable is set.
+	 *
+	 * If we are using SW PAN, set the DACR user domain to no access
+	 * if \disable is set.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
 	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
@@ -84,8 +90,17 @@
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])
 	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
-	.if \disable
-	uaccess_disable \tmp0
+	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
+	/* kernel=client, user=no access */
+	mov	\tmp2, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
+	.elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS)
+	/* kernel=client */
+	bic	\tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL)
+	orr	\tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT)
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
 	.endif
 	.endm
 
-- 
2.25.1

[PATCH 4.9 30/61] IB/qib: Call kobject_put() when kobject_init_and_add() fails

[Greg Kroah-Hartman]

From: Kaike Wan <kaike.wan@intel.com>

[ Upstream commit a35cd6447effd5c239b564c80fa109d05ff3d114 ]

When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Suggested-by: Lin Yi <teroincn@gmail.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qib/qib_sysfs.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index 8ce0f6eef89e..b9d653afff8b 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -756,7 +756,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping linkcontrol sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail;
+		goto bail_link;
 	}
 	kobject_uevent(&ppd->pport_kobj, KOBJ_ADD);
 
@@ -766,7 +766,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping sl2vl sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail_link;
+		goto bail_sl;
 	}
 	kobject_uevent(&ppd->sl2vl_kobj, KOBJ_ADD);
 
@@ -776,7 +776,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 			"Skipping diag_counters sysfs info, (err %d) port %u\n",
 			ret, port_num);
-		goto bail_sl;
+		goto bail_diagc;
 	}
 	kobject_uevent(&ppd->diagc_kobj, KOBJ_ADD);
 
@@ -789,7 +789,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
 		qib_dev_err(dd,
 		 "Skipping Congestion Control sysfs info, (err %d) port %u\n",
 		 ret, port_num);
-		goto bail_diagc;
+		goto bail_cc;
 	}
 
 	kobject_uevent(&ppd->pport_cc_kobj, KOBJ_ADD);
@@ -871,6 +871,7 @@ void qib_verbs_unregister_sysfs(struct qib_devdata *dd)
 				&cc_table_bin_attr);
 			kobject_put(&ppd->pport_cc_kobj);
 		}
+		kobject_put(&ppd->diagc_kobj);
 		kobject_put(&ppd->sl2vl_kobj);
 		kobject_put(&ppd->pport_kobj);
 	}
-- 
2.25.1

[PATCH 4.9 31/61] ARM: dts: imx: Correct B850v3 clock assignment

[Greg Kroah-Hartman]

From: Martyn Welch <martyn.welch@collabora.co.uk>

[ Upstream commit 1d0c7bb20c083a6e810d2142545b5606f8131080 ]

The IPU that drives HDMI must have its pre_sel set to pll2_pfd_396m
to avoid stepping on the LVDS output's toes, as the PLL can't be clocked
to the pixel clock and to the LVDS serial clock (3.5*pixel clock) at the
same time.

As we are using ipu1_di0 and ipu2_di0, ensure both are switched to
to pll2_pfd2_396m to avoid issues. The LDB driver will switch the
required IPU to ldb_di1 when it uses it to drive LVDS.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6q-b850v3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 167f7446722a..e5e9a16155d9 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -57,7 +57,7 @@
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>;
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
 				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-- 
2.25.1

[PATCH 4.9 32/61] ARM: dts: imx6q-bx50v3: Add internal switch

[Greg Kroah-Hartman]

From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

[ Upstream commit e26dead442689a861358f33126210b0f8de615a9 ]

B850v3, B650v3 and B450v3 all have a GPIO bit banged MDIO bus to
communicate with a Marvell switch. On all devices the switch is
connected to a PCI based network card, which needs to be referenced
by DT, so this also adds the common PCI root node.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 62 +++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index e4a415fd899b..ff8928a0b406 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -92,6 +92,56 @@
 		mux-int-port = <1>;
 		mux-ext-port = <4>;
 	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	mdio0: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085"; /* 88e6240*/
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+				};
+			};
+		};
+	};
 };
 
 &ecspi5 {
@@ -299,3 +349,15 @@
 		tcxo-clock-frequency = <26000000>;
 	};
 };
+
+&pcie {
+	/* Synopsys, Inc. Device */
+	pci_root: root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+	};
+};
-- 
2.25.1

[PATCH 4.9 33/61] ARM: dts/imx6q-bx50v3: Set display interface clock parents

[Greg Kroah-Hartman]

From: Robert Beckett <bob.beckett@collabora.com>

[ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ]

Avoid LDB and IPU DI clocks both using the same parent. LDB requires
pasthrough clock to avoid breaking timing while IPU DI does not.

Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent
and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.

This fixes an issue where attempting atomic modeset while using
HDMI and display port at the same time causes LDB clock programming
to destroy the programming of HDMI that was done during the same
modeset.

Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
 originally chosen by Robert Beckett to avoid affecting eMMC clock
 by DRM atomic updates]
Signed-off-by: Ian Ray <ian.ray@ge.com>
[Squash Robert's and Ian's commits for bisectability, update patch
 description and add stable tag]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6q-b450v3.dts  |  7 -------
 arch/arm/boot/dts/imx6q-b650v3.dts  |  7 -------
 arch/arm/boot/dts/imx6q-b850v3.dts  | 11 -----------
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 15 +++++++++++++++
 4 files changed, 15 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 78bfc1a307d6..ebc6e10f8624 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index d85388725426..681aa612e07f 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index e5e9a16155d9..8596df4078e9 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -53,17 +53,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
 &ldb {
 	fsl,dual-channel;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index ff8928a0b406..cee0e19f180f 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -361,3 +361,18 @@
 		#interrupt-cells = <1>;
 	};
 };
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
-- 
2.25.1

[PATCH 4.9 34/61] ALSA: hwdep: fix a left shifting 1 by 31 UB bug

[Greg Kroah-Hartman]

From: Changming Liu <liu.changm@northeastern.edu>

[ Upstream commit fb8cd6481ffd126f35e9e146a0dcf0c4e8899f2e ]

The "info.index" variable can be 31 in "1 << info.index".
This might trigger an undefined behavior since 1 is signed.

Fix this by casting 1 to 1u just to be sure "1u << 31" is defined.

Signed-off-by: Changming Liu <liu.changm@northeastern.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR06MB4548170B842CB055C9AF695DE5B00@BL0PR06MB4548.namprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/hwdep.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index 36d2416f90d9..96b737adf4d2 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -228,14 +228,14 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw,
 	if (copy_from_user(&info, _info, sizeof(info)))
 		return -EFAULT;
 	/* check whether the dsp was already loaded */
-	if (hw->dsp_loaded & (1 << info.index))
+	if (hw->dsp_loaded & (1u << info.index))
 		return -EBUSY;
 	if (!access_ok(VERIFY_READ, info.image, info.length))
 		return -EFAULT;
 	err = hw->ops.dsp_load(hw, &info);
 	if (err < 0)
 		return err;
-	hw->dsp_loaded |= (1 << info.index);
+	hw->dsp_loaded |= (1u << info.index);
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.9 35/61] ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC

[Greg Kroah-Hartman]

From: Chris Chiu <chiu@endlessm.com>

[ Upstream commit 4020d1ccbe55bdf67b31d718d2400506eaf4b43f ]

The Asus USB DAC is a USB type-C audio dongle for connecting to
the headset and headphone. The volume minimum value -23040 which
is 0xa600 in hexadecimal with the resolution value 1 indicates
this should be endianness issue caused by the firmware bug. Add
a volume quirk to fix the volume control problem.

Also fixes this warning:
  Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
  [5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1
  Warning! Unlikely big volume range (=23040), cval->res is probably wrong.
  [7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index e2f62362a0b0..024864ce3f76 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -980,6 +980,14 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
 			cval->res = 384;
 		}
 		break;
+	case USB_ID(0x0495, 0x3042): /* ESS Technology Asus USB DAC */
+		if ((strstr(kctl->id.name, "Playback Volume") != NULL) ||
+			strstr(kctl->id.name, "Capture Volume") != NULL) {
+			cval->min >>= 8;
+			cval->max = 0;
+			cval->res = 1;
+		}
+		break;
 	}
 }
 
-- 
2.25.1

[PATCH 4.9 36/61] exec: Always set cap_ambient in cap_bprm_set_creds

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

[ Upstream commit a4ae32c71fe90794127b32d26d7ad795813b502e ]

An invariant of cap_bprm_set_creds is that every field in the new cred
structure that cap_bprm_set_creds might set, needs to be set every
time to ensure the fields does not get a stale value.

The field cap_ambient is not set every time cap_bprm_set_creds is
called, which means that if there is a suid or sgid script with an
interpreter that has neither the suid nor the sgid bits set the
interpreter should be able to accept ambient credentials.
Unfortuantely because cap_ambient is not reset to it's original value
the interpreter can not accept ambient credentials.

Given that the ambient capability set is expected to be controlled by
the caller, I don't think this is particularly serious.  But it is
definitely worth fixing so the code works correctly.

I have tested to verify my reading of the code is correct and the
interpreter of a sgid can receive ambient capabilities with this
change and cannot receive ambient capabilities without this change.

Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Fixes: 58319057b784 ("capabilities: ambient capabilities")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/commoncap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/security/commoncap.c b/security/commoncap.c
index 8df676fbd393..b86aca8d6798 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -497,6 +497,7 @@ int cap_bprm_set_creds(struct linux_binprm *bprm)
 	int ret;
 	kuid_t root_uid;
 
+	new->cap_ambient = old->cap_ambient;
 	if (WARN_ON(!cap_ambient_invariant_ok(old)))
 		return -EPERM;
 
-- 
2.25.1

[PATCH 4.9 37/61] libceph: ignore pool overlay and cache logic on redirects

[Greg Kroah-Hartman]

From: Jerry Lee <leisurelysw24@gmail.com>

[ Upstream commit 890bd0f8997ae6ac0a367dd5146154a3963306dd ]

OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.

[ idryomov: Redirects are effectively deprecated and no longer
  used or tested.  The original tiering modes based on redirects
  are inherently flawed because redirects can race and reorder,
  potentially resulting in data corruption.  The new proxy and
  readproxy tiering modes should be used instead of forward and
  readforward.  Still marking for stable as obviously correct,
  though. ]

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ceph/osd_client.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 70ccb0716fc5..4fd679b30b19 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -2879,7 +2879,9 @@ static void handle_reply(struct ceph_osd *osd, struct ceph_msg *msg)
 		 * supported.
 		 */
 		req->r_t.target_oloc.pool = m.redirect.oloc.pool;
-		req->r_flags |= CEPH_OSD_FLAG_REDIRECTED;
+		req->r_flags |= CEPH_OSD_FLAG_REDIRECTED |
+				CEPH_OSD_FLAG_IGNORE_OVERLAY |
+				CEPH_OSD_FLAG_IGNORE_CACHE;
 		req->r_tid = 0;
 		__submit_request(req, false);
 		goto out_unlock_osdc;
-- 
2.25.1

[PATCH 4.9 38/61] mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()

[Greg Kroah-Hartman]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit 6988f31d558aa8c744464a7f6d91d34ada48ad12 ]

Replace superfluous VM_BUG_ON() with comment about correct usage.

Technically reverts commit 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to
page_mapcount()"), but context lines have changed.

Function isolate_migratepages_block() runs some checks out of lru_lock
when choose pages for migration.  After checking PageLRU() it checks
extra page references by comparing page_count() and page_mapcount().
Between these two checks page could be removed from lru, freed and taken
by slab.

As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount().
Race window is tiny.  For certain workload this happens around once a
year.

    page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0
    flags: 0x500000000008100(slab|head)
    raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180
    raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
    page dumped because: VM_BUG_ON_PAGE(PageSlab(page))
    ------------[ cut here ]------------
    kernel BUG at ./include/linux/mm.h:628!
    invalid opcode: 0000 [#1] SMP NOPTI
    CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G        W         4.19.109-27 #1
    Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019
    RIP: 0010:isolate_migratepages_block+0x986/0x9b0

The code in isolate_migratepages_block() was added in commit
119d6d59dcc0 ("mm, compaction: avoid isolating pinned pages") before
adding VM_BUG_ON into page_mapcount().

This race has been predicted in 2015 by Vlastimil Babka (see link
below).

[akpm@linux-foundation.org: comment tweaks, per Hugh]
Fixes: 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz
Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/
Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/ (v1)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mm.h | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index ca6f213fa4f0..7a4c035b187f 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -504,6 +504,11 @@ static inline int is_vmalloc_or_module_addr(const void *x)
 
 extern void kvfree(const void *addr);
 
+/*
+ * Mapcount of compound page as a whole, does not include mapped sub-pages.
+ *
+ * Must be called only for compound pages or any their tail sub-pages.
+ */
 static inline int compound_mapcount(struct page *page)
 {
 	VM_BUG_ON_PAGE(!PageCompound(page), page);
@@ -523,10 +528,16 @@ static inline void page_mapcount_reset(struct page *page)
 
 int __page_mapcount(struct page *page);
 
+/*
+ * Mapcount of 0-order page; when compound sub-page, includes
+ * compound_mapcount().
+ *
+ * Result is undefined for pages which cannot be mapped into userspace.
+ * For example SLAB or special types of pages. See function page_has_type().
+ * They use this place in struct page differently.
+ */
 static inline int page_mapcount(struct page *page)
 {
-	VM_BUG_ON_PAGE(PageSlab(page), page);
-
 	if (unlikely(PageCompound(page)))
 		return __page_mapcount(page);
 	return atomic_read(&page->_mapcount) + 1;
-- 
2.25.1

[PATCH 4.9 39/61] fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()

[Greg Kroah-Hartman]

From: Alexander Potapenko <glider@google.com>

[ Upstream commit 1d605416fb7175e1adf094251466caa52093b413 ]

KMSAN reported uninitialized data being written to disk when dumping
core.  As a result, several kilobytes of kmalloc memory may be written
to the core file and then read by a non-privileged user.

Reported-by: sam <sunhaoyl@outlook.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com
Link: https://github.com/google/kmsan/issues/76
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/binfmt_elf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index e78553d51837..73cd7482c1fa 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1721,7 +1721,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
 		    (!regset->active || regset->active(t->task, regset) > 0)) {
 			int ret;
 			size_t size = regset->n * regset->size;
-			void *data = kmalloc(size, GFP_KERNEL);
+			void *data = kzalloc(size, GFP_KERNEL);
 			if (unlikely(!data))
 				return 0;
 			ret = regset->get(t->task, regset,
-- 
2.25.1

[PATCH 4.9 40/61] include/asm-generic/topology.h: guard cpumask_of_node() macro argument

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 4377748c7b5187c3342a60fa2ceb60c8a57a8488 ]

drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int')
                                        (channel - data->nr_cpus));
                                        ~~~~~~~~~^~~~~~~~~~~~~~~~~
include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node'
    #define cpumask_of_node(node)       ((void)node, cpu_online_mask)
                                               ^~~~
include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and'
 #define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
                                                                       ^~~~~

Fixes: f0b848ce6fe9 ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask")
Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200527134623.930247-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
index 5d2add1a6c96..864fcfa1df41 100644
--- a/include/asm-generic/topology.h
+++ b/include/asm-generic/topology.h
@@ -51,7 +51,7 @@
   #ifdef CONFIG_NEED_MULTIPLE_NODES
     #define cpumask_of_node(node)	((node) == 0 ? cpu_online_mask : cpu_none_mask)
   #else
-    #define cpumask_of_node(node)	((void)node, cpu_online_mask)
+    #define cpumask_of_node(node)	((void)(node), cpu_online_mask)
   #endif
 #endif
 #ifndef pcibus_to_node
-- 
2.25.1

[PATCH 4.9 41/61] iommu: Fix reference count leak in iommu_group_alloc.

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 7cc31613734c4870ae32f5265d576ef296621343 ]

kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.

Fixes: d72e31c93746 ("iommu: IOMMU Groups")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -195,7 +195,7 @@ struct iommu_group *iommu_group_alloc(vo
 				   NULL, "%d", group->id);
 	if (ret) {
 		ida_simple_remove(&iommu_group_ida, group->id);
-		kfree(group);
+		kobject_put(&group->kobj);
 		return ERR_PTR(ret);
 	}
 

[PATCH 4.9 42/61] parisc: Fix kernel panic in mem_init()

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit bf71bc16e02162388808949b179d59d0b571b965 upstream.

The Debian kernel v5.6 triggers this kernel panic:

 Kernel panic - not syncing: Bad Address (null pointer deref?)
 Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
  IAOQ[0]: mem_init+0xb0/0x150
  IAOQ[1]: mem_init+0xb4/0x150
  RP(r2): start_kernel+0x6c8/0x1190
 Backtrace:
  [<0000000040101ab4>] start_kernel+0x6c8/0x1190
  [<0000000040108574>] start_parisc+0x158/0x1b8

on a HP-PARISC rp3440 machine with this memory layout:
 Memory Ranges:
  0) Start 0x0000000000000000 End 0x000000003fffffff Size   1024 MB
  1) Start 0x0000004040000000 End 0x00000040ffdfffff Size   3070 MB

Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/parisc/mm/init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -604,7 +604,7 @@ void __init mem_init(void)
 			> BITS_PER_LONG);
 
 	high_memory = __va((max_pfn << PAGE_SHIFT));
-	set_max_mapnr(page_to_pfn(virt_to_page(high_memory - 1)) + 1);
+	set_max_mapnr(max_low_pfn);
 	free_all_bootmem();
 
 #ifdef CONFIG_PA11

[PATCH 4.9 43/61] mac80211: mesh: fix discovery timer re-arming issue / crash

[Greg Kroah-Hartman]

From: Linus Lüssing <ll@simonwunderlich.de>

commit e2d4a80f93fcfaf72e2e20daf6a28e39c3b90677 upstream.

On a non-forwarding 802.11s link between two fairly busy
neighboring nodes (iperf with -P 16 at ~850MBit/s TCP;
1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with
frequent PREQ retries, usually after around 30-40 seconds the
following crash would occur:

[ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000
[ 1110.830786] Mem abort info:
[ 1110.833573]   Exception class = IABT (current EL), IL = 32 bits
[ 1110.839494]   SET = 0, FnV = 0
[ 1110.842546]   EA = 0, S1PTW = 0
[ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000
[ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000
[ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common
[ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000)
[ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0
[ 1110.944965] Hardware name: LS1043A RGW Board (DT)
[ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000
[ 1110.955568] PC is at 0x0
[ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78
[ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145
[ 1110.970440] sp : ffff00000801be10
[ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018
[ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0
[ 1110.984352] x25: 0000000000000000 x24: 0000000000000000
[ 1110.989657] x23: dead000000000200 x22: 0000000000000000
[ 1110.994959] x21: 0000000000000000 x20: 0000000000000101
[ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000
[ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058
[ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000
[ 1111.016172] x13: ffff000008916788 x12: 0000000000000040
[ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001
[ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004
[ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8
[ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010
[ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614
[ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000
[ 1111.053290] Call trace:
[ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10)
[ 1111.062158] bcc0:                                   0000000000000000 0000000000000000
[ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0
[ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0
[ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788
[ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0
[ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000
[ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000
[ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10
[ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145
[ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8
[ 1111.140353] be00: ffff00000801be10 0000000000000000
[ 1111.145220] [<          (null)>]           (null)
[ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0
[ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70)
[ 1111.183642] be20:                                   0000000000000020 0000000000000000
[ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000
[ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0
[ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000
[ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0
[ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000
[ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000
[ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70
[ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145
[ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574
[ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0
[ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c
[ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18
[ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8
[ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28
[ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110
[ 1111.293662] Code: bad PC value
[ 1111.296710] ---[ end trace 555b6ca4363c3edd ]---
[ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt
[ 1111.307661] SMP: stopping secondary CPUs
[ 1111.311574] Kernel Offset: disabled
[ 1111.315053] CPU features: 0x0002000
[ 1111.318530] Memory Limit: none
[ 1111.321575] Rebooting in 3 seconds..

With some added debug output / delays we were able to push the crash from
the timer callback runner into the callback function and by that shedding
some light on which object holding the timer gets corrupted:

[  401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868
[...]
[  402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48
[  402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211]
[  402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78
[  402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[  402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[  402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[  402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[  402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0

The issue happens due to the following sequence of events:

1) mesh_path_start_discovery():
-> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx()

2) mesh_path_free_rcu()
-> del_timer_sync(&mpath->timer)
   [...]
-> kfree_rcu(mpath)

3) mesh_path_start_discovery():
-> mod_timer(&mpath->timer, ...)
   [...]
-> rcu_read_unlock()

4) mesh_path_free_rcu()'s kfree_rcu():
-> kfree(mpath)

5) mesh_path_timer() starts after timeout, using freed mpath object

So a use-after-free issue due to a timer re-arming bug caused by an
early spin-unlocking.

This patch fixes this issue by re-checking if mpath is about to be
free'd and if so bails out of re-arming the timer.

Cc: stable@vger.kernel.org
Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/mesh_hwmp.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1082,7 +1082,14 @@ void mesh_path_start_discovery(struct ie
 	mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->vif.addr, ifmsh->sn,
 			       target_flags, mpath->dst, mpath->sn, da, 0,
 			       ttl, lifetime, 0, ifmsh->preq_id++, sdata);
+
+	spin_lock_bh(&mpath->state_lock);
+	if (mpath->flags & MESH_PATH_DELETED) {
+		spin_unlock_bh(&mpath->state_lock);
+		goto enddiscovery;
+	}
 	mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);
+	spin_unlock_bh(&mpath->state_lock);
 
 enddiscovery:
 	rcu_read_unlock();

[PATCH 4.9 44/61] x86/dma: Fix max PFN arithmetic overflow on 32 bit systems

[Greg Kroah-Hartman]

From: Alexander Dahl <post@lespocky.de>

commit 88743470668ef5eb6b7ba9e0f99888e5999bf172 upstream.

The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.

On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.

That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active.  That comparison yields the opposite result,
when compiling on 32 bit systems.

This was not possible before

  1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")

when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).

In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.

However if one has set CONFIG_IOMMU_INTEL, since

  c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")

there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).

The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.

We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:

  Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
  …
  Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
  …
  PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)

The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:

  https://unix.stackexchange.com/a/520525/50007

The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.

The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.

 [ bp: Massage commit message. ]

Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/dma.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -73,7 +73,7 @@
 #define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
-#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT))
 
 #ifdef CONFIG_X86_32
 /* The maximum address that we can perform a DMA transfer to on this platform */

[PATCH 4.9 45/61] xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit afcaf61be9d1dbdee5ec186d1dcc67b6b692180f upstream.

For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:

    ----------------------------------------------------
    | outer  |     | dest |     |      |  ESP    | ESP |
    | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
    ----------------------------------------------------

The nexthdr from ESP could be NEXTHDR_HOP(0), so it should
continue processing the packet when nexthdr returns 0 in
xfrm_input(). Otherwise, when ipv6 nexthdr is set, the
packet will be dropped.

I don't see any error cases that nexthdr may return 0. So
fix it by removing the check for nexthdr == 0.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -302,7 +302,7 @@ resume:
 		dev_put(skb->dev);
 
 		spin_lock(&x->lock);
-		if (nexthdr <= 0) {
+		if (nexthdr < 0) {
 			if (nexthdr == -EBADMSG) {
 				xfrm_audit_state_icvfail(x, skb,
 							 x->type->proto);

[PATCH 4.9 46/61] xfrm: fix a warning in xfrm_policy_insert_list

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit ed17b8d377eaf6b4a01d46942b4c647378a79bdd upstream.

This waring can be triggered simply by:

  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 1 mark 0 mask 0x10  #[1]
  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 2 mark 0 mask 0x1   #[2]
  # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
    priority 2 mark 0 mask 0x10  #[3]

Then dmesg shows:

  [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548
  [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030
  [ ] Call Trace:
  [ ]  xfrm_policy_inexact_insert+0x85/0xe50
  [ ]  xfrm_policy_insert+0x4ba/0x680
  [ ]  xfrm_add_policy+0x246/0x4d0
  [ ]  xfrm_user_rcv_msg+0x331/0x5c0
  [ ]  netlink_rcv_skb+0x121/0x350
  [ ]  xfrm_netlink_rcv+0x66/0x80
  [ ]  netlink_unicast+0x439/0x630
  [ ]  netlink_sendmsg+0x714/0xbf0
  [ ]  sock_sendmsg+0xe2/0x110

The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting
policies with matching mark and different priorities"). After that, the
policies [1] and [2] would be able to be added with different priorities.

However, policy [3] will actually match both [1] and [2]. Policy [1]
was matched due to the 1st 'return true' in xfrm_policy_mark_match(),
and policy [2] was matched due to the 2nd 'return true' in there. It
caused WARN_ON() in xfrm_policy_insert_list().

This patch is to fix it by only (the same value and priority) as the
same policy in xfrm_policy_mark_match().

Thanks to Yuehaibing, we could make this fix better.

v1->v2:
  - check policy->mark.v == pol->mark.v only without mask.

Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_policy.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -757,12 +757,7 @@ static void xfrm_policy_requeue(struct x
 static bool xfrm_policy_mark_match(struct xfrm_policy *policy,
 				   struct xfrm_policy *pol)
 {
-	u32 mark = policy->mark.v & policy->mark.m;
-
-	if (policy->mark.v == pol->mark.v && policy->mark.m == pol->mark.m)
-		return true;
-
-	if ((mark & pol->mark.m) == pol->mark.v &&
+	if (policy->mark.v == pol->mark.v &&
 	    policy->priority == pol->priority)
 		return true;
 

[PATCH 4.9 47/61] xfrm: fix a NULL-ptr deref in xfrm_local_error

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit f6a23d85d078c2ffde79c66ca81d0a1dde451649 upstream.

This patch is to fix a crash:

  [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access
  [ ] general protection fault: 0000 [#1] SMP KASAN PTI
  [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0
  [ ] Call Trace:
  [ ]  xfrm6_local_error+0x1eb/0x300
  [ ]  xfrm_local_error+0x95/0x130
  [ ]  __xfrm6_output+0x65f/0xb50
  [ ]  xfrm6_output+0x106/0x46f
  [ ]  udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel]
  [ ]  vxlan_xmit_one+0xbc6/0x2c60 [vxlan]
  [ ]  vxlan_xmit+0x6a0/0x4276 [vxlan]
  [ ]  dev_hard_start_xmit+0x165/0x820
  [ ]  __dev_queue_xmit+0x1ff0/0x2b90
  [ ]  ip_finish_output2+0xd3e/0x1480
  [ ]  ip_do_fragment+0x182d/0x2210
  [ ]  ip_output+0x1d0/0x510
  [ ]  ip_send_skb+0x37/0xa0
  [ ]  raw_sendmsg+0x1b4c/0x2b80
  [ ]  sock_sendmsg+0xc0/0x110

This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.

This issue was actually fixed by Commit 628e341f319f ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e4b
("xfrm: choose protocol family by skb protocol").

So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.

Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_output.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -240,7 +240,8 @@ void xfrm_local_error(struct sk_buff *sk
 
 	if (skb->protocol == htons(ETH_P_IP))
 		proto = AF_INET;
-	else if (skb->protocol == htons(ETH_P_IPV6))
+	else if (skb->protocol == htons(ETH_P_IPV6) &&
+		 skb->sk->sk_family == AF_INET6)
 		proto = AF_INET6;
 	else
 		return;

[PATCH 4.9 48/61] vti4: eliminated some duplicate code.

[Greg Kroah-Hartman]

From: Jeremy Sowden <jeremy@azazel.net>

commit f981c57ffd2d7cf2dd4b6d6f8fcb3965df42f54c upstream.

The ipip tunnel introduced in commit dd9ee3444014 ("vti4: Fix a ipip
packet processing bug in 'IPCOMP' virtual tunnel") largely duplicated
the existing vti_input and vti_recv functions.  Refactored to
deduplicate the common code.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/ip_vti.c |   60 +++++++++++++++++++-----------------------------------
 1 file changed, 22 insertions(+), 38 deletions(-)

--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -50,7 +50,7 @@ static int vti_net_id __read_mostly;
 static int vti_tunnel_init(struct net_device *dev);
 
 static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi,
-		     int encap_type)
+		     int encap_type, bool update_skb_dev)
 {
 	struct ip_tunnel *tunnel;
 	const struct iphdr *iph = ip_hdr(skb);
@@ -65,6 +65,9 @@ static int vti_input(struct sk_buff *skb
 
 		XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
 
+		if (update_skb_dev)
+			skb->dev = tunnel->dev;
+
 		return xfrm_input(skb, nexthdr, spi, encap_type);
 	}
 
@@ -74,47 +77,28 @@ drop:
 	return 0;
 }
 
-static int vti_input_ipip(struct sk_buff *skb, int nexthdr, __be32 spi,
-		     int encap_type)
+static int vti_input_proto(struct sk_buff *skb, int nexthdr, __be32 spi,
+			   int encap_type)
 {
-	struct ip_tunnel *tunnel;
-	const struct iphdr *iph = ip_hdr(skb);
-	struct net *net = dev_net(skb->dev);
-	struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
-
-	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
-				  iph->saddr, iph->daddr, 0);
-	if (tunnel) {
-		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
-			goto drop;
-
-		XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
-
-		skb->dev = tunnel->dev;
-
-		return xfrm_input(skb, nexthdr, spi, encap_type);
-	}
-
-	return -EINVAL;
-drop:
-	kfree_skb(skb);
-	return 0;
+	return vti_input(skb, nexthdr, spi, encap_type, false);
 }
 
-static int vti_rcv(struct sk_buff *skb)
+static int vti_rcv(struct sk_buff *skb, __be32 spi, bool update_skb_dev)
 {
 	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
 	XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
 
-	return vti_input(skb, ip_hdr(skb)->protocol, 0, 0);
+	return vti_input(skb, ip_hdr(skb)->protocol, spi, 0, update_skb_dev);
 }
 
-static int vti_rcv_ipip(struct sk_buff *skb)
+static int vti_rcv_proto(struct sk_buff *skb)
 {
-	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
-	XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
+	return vti_rcv(skb, 0, false);
+}
 
-	return vti_input_ipip(skb, ip_hdr(skb)->protocol, ip_hdr(skb)->saddr, 0);
+static int vti_rcv_tunnel(struct sk_buff *skb)
+{
+	return vti_rcv(skb, ip_hdr(skb)->saddr, true);
 }
 
 static int vti_rcv_cb(struct sk_buff *skb, int err)
@@ -482,31 +466,31 @@ static void __net_init vti_fb_tunnel_ini
 }
 
 static struct xfrm4_protocol vti_esp4_protocol __read_mostly = {
-	.handler	=	vti_rcv,
-	.input_handler	=	vti_input,
+	.handler	=	vti_rcv_proto,
+	.input_handler	=	vti_input_proto,
 	.cb_handler	=	vti_rcv_cb,
 	.err_handler	=	vti4_err,
 	.priority	=	100,
 };
 
 static struct xfrm4_protocol vti_ah4_protocol __read_mostly = {
-	.handler	=	vti_rcv,
-	.input_handler	=	vti_input,
+	.handler	=	vti_rcv_proto,
+	.input_handler	=	vti_input_proto,
 	.cb_handler	=	vti_rcv_cb,
 	.err_handler	=	vti4_err,
 	.priority	=	100,
 };
 
 static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = {
-	.handler	=	vti_rcv,
-	.input_handler	=	vti_input,
+	.handler	=	vti_rcv_proto,
+	.input_handler	=	vti_input_proto,
 	.cb_handler	=	vti_rcv_cb,
 	.err_handler	=	vti4_err,
 	.priority	=	100,
 };
 
 static struct xfrm_tunnel ipip_handler __read_mostly = {
-	.handler	=	vti_rcv_ipip,
+	.handler	=	vti_rcv_tunnel,
 	.err_handler	=	vti4_err,
 	.priority	=	0,
 };

[PATCH 4.9 49/61] ip_vti: receive ipip packet by calling ip_tunnel_rcv

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit 976eba8ab596bab94b9714cd46d38d5c6a2c660d upstream.

In Commit dd9ee3444014 ("vti4: Fix a ipip packet processing bug in
'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti
by calling xfrm_input(). This case happens when a small packet or
frag sent by peer is too small to get compressed.

However, xfrm_input() will still get to the IPCOMP path where skb
sec_path is set, but never dropped while it should have been done
in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an
ipcomp4 packet. This will cause that the packet can never pass
xfrm4_policy_check() in the upper protocol rcv functions.

So this patch is to call ip_tunnel_rcv() to process IPIP packets
instead.

Fixes: dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/ip_vti.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -98,7 +98,28 @@ static int vti_rcv_proto(struct sk_buff
 
 static int vti_rcv_tunnel(struct sk_buff *skb)
 {
-	return vti_rcv(skb, ip_hdr(skb)->saddr, true);
+	struct ip_tunnel_net *itn = net_generic(dev_net(skb->dev), vti_net_id);
+	const struct iphdr *iph = ip_hdr(skb);
+	struct ip_tunnel *tunnel;
+
+	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+				  iph->saddr, iph->daddr, 0);
+	if (tunnel) {
+		struct tnl_ptk_info tpi = {
+			.proto = htons(ETH_P_IP),
+		};
+
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			goto drop;
+		if (iptunnel_pull_header(skb, 0, tpi.proto, false))
+			goto drop;
+		return ip_tunnel_rcv(tunnel, skb, &tpi, NULL, false);
+	}
+
+	return -EINVAL;
+drop:
+	kfree_skb(skb);
+	return 0;
 }
 
 static int vti_rcv_cb(struct sk_buff *skb, int err)

[PATCH 4.9 50/61] netfilter: nft_reject_bridge: enable reject with bridge vlan

[Greg Kroah-Hartman]

From: Michael Braun <michael-dev@fami-braun.de>

commit e9c284ec4b41c827f4369973d2792992849e4fa5 upstream.

Currently, using the bridge reject target with tagged packets
results in untagged packets being sent back.

Fix this by mirroring the vlan id as well.

Fixes: 85f5b3086a04 ("netfilter: bridge: add reject support")
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bridge/netfilter/nft_reject_bridge.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/bridge/netfilter/nft_reject_bridge.c
+++ b/net/bridge/netfilter/nft_reject_bridge.c
@@ -34,6 +34,12 @@ static void nft_reject_br_push_etherhdr(
 	ether_addr_copy(eth->h_dest, eth_hdr(oldskb)->h_source);
 	eth->h_proto = eth_hdr(oldskb)->h_proto;
 	skb_pull(nskb, ETH_HLEN);
+
+	if (skb_vlan_tag_present(oldskb)) {
+		u16 vid = skb_vlan_tag_get(oldskb);
+
+		__vlan_hwaccel_put_tag(nskb, oldskb->vlan_proto, vid);
+	}
 }
 
 static int nft_bridge_iphdr_validate(struct sk_buff *skb)

[PATCH 4.9 51/61] netfilter: ipset: Fix subcounter update skip

[Greg Kroah-Hartman]

From: Phil Sutter <phil@nwl.cc>

commit a164b95ad6055c50612795882f35e0efda1f1390 upstream.

If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not
update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE
must be set, not unset.

Fixes: 6e01781d1c80e ("netfilter: ipset: set match: add support to match the counters")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipset/ip_set_list_set.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -61,7 +61,7 @@ list_set_ktest(struct ip_set *set, const
 	/* Don't lookup sub-counters at all */
 	opt->cmdflags &= ~IPSET_FLAG_MATCH_COUNTERS;
 	if (opt->cmdflags & IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE)
-		opt->cmdflags &= ~IPSET_FLAG_SKIP_COUNTER_UPDATE;
+		opt->cmdflags |= IPSET_FLAG_SKIP_COUNTER_UPDATE;
 	list_for_each_entry_rcu(e, &map->members, list) {
 		if (SET_WITH_TIMEOUT(set) &&
 		    ip_set_timeout_expired(ext_timeout(e, set)))

[PATCH 4.9 52/61] netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 4c559f15efcc43b996f4da528cd7f9483aaca36d upstream.

Dan Carpenter says: "Smatch complains that the value for "cmd" comes
from the network and can't be trusted."

Add pptp_msg_name() helper function that checks for the array boundary.

Fixes: f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/netfilter/nf_conntrack_pptp.h |    2 
 net/ipv4/netfilter/nf_nat_pptp.c            |    7 ---
 net/netfilter/nf_conntrack_pptp.c           |   62 +++++++++++++++-------------
 3 files changed, 38 insertions(+), 33 deletions(-)

--- a/include/linux/netfilter/nf_conntrack_pptp.h
+++ b/include/linux/netfilter/nf_conntrack_pptp.h
@@ -4,7 +4,7 @@
 
 #include <linux/netfilter/nf_conntrack_common.h>
 
-extern const char *const pptp_msg_name[];
+extern const char *const pptp_msg_name(u_int16_t msg);
 
 /* state of the control session */
 enum pptp_ctrlsess_state {
--- a/net/ipv4/netfilter/nf_nat_pptp.c
+++ b/net/ipv4/netfilter/nf_nat_pptp.c
@@ -156,8 +156,7 @@ pptp_outbound_pkt(struct sk_buff *skb,
 		break;
 	default:
 		pr_debug("unknown outbound packet 0x%04x:%s\n", msg,
-			 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
-					       pptp_msg_name[0]);
+			 pptp_msg_name(msg));
 		/* fall through */
 	case PPTP_SET_LINK_INFO:
 		/* only need to NAT in case PAC is behind NAT box */
@@ -250,9 +249,7 @@ pptp_inbound_pkt(struct sk_buff *skb,
 		pcid_off = offsetof(union pptp_ctrl_union, setlink.peersCallID);
 		break;
 	default:
-		pr_debug("unknown inbound packet %s\n",
-			 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
-					       pptp_msg_name[0]);
+		pr_debug("unknown inbound packet %s\n", pptp_msg_name(msg));
 		/* fall through */
 	case PPTP_START_SESSION_REQUEST:
 	case PPTP_START_SESSION_REPLY:
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -71,24 +71,32 @@ EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expec
 
 #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
 /* PptpControlMessageType names */
-const char *const pptp_msg_name[] = {
-	"UNKNOWN_MESSAGE",
-	"START_SESSION_REQUEST",
-	"START_SESSION_REPLY",
-	"STOP_SESSION_REQUEST",
-	"STOP_SESSION_REPLY",
-	"ECHO_REQUEST",
-	"ECHO_REPLY",
-	"OUT_CALL_REQUEST",
-	"OUT_CALL_REPLY",
-	"IN_CALL_REQUEST",
-	"IN_CALL_REPLY",
-	"IN_CALL_CONNECT",
-	"CALL_CLEAR_REQUEST",
-	"CALL_DISCONNECT_NOTIFY",
-	"WAN_ERROR_NOTIFY",
-	"SET_LINK_INFO"
+static const char *const pptp_msg_name_array[PPTP_MSG_MAX + 1] = {
+	[0]				= "UNKNOWN_MESSAGE",
+	[PPTP_START_SESSION_REQUEST]	= "START_SESSION_REQUEST",
+	[PPTP_START_SESSION_REPLY]	= "START_SESSION_REPLY",
+	[PPTP_STOP_SESSION_REQUEST]	= "STOP_SESSION_REQUEST",
+	[PPTP_STOP_SESSION_REPLY]	= "STOP_SESSION_REPLY",
+	[PPTP_ECHO_REQUEST]		= "ECHO_REQUEST",
+	[PPTP_ECHO_REPLY]		= "ECHO_REPLY",
+	[PPTP_OUT_CALL_REQUEST]		= "OUT_CALL_REQUEST",
+	[PPTP_OUT_CALL_REPLY]		= "OUT_CALL_REPLY",
+	[PPTP_IN_CALL_REQUEST]		= "IN_CALL_REQUEST",
+	[PPTP_IN_CALL_REPLY]		= "IN_CALL_REPLY",
+	[PPTP_IN_CALL_CONNECT]		= "IN_CALL_CONNECT",
+	[PPTP_CALL_CLEAR_REQUEST]	= "CALL_CLEAR_REQUEST",
+	[PPTP_CALL_DISCONNECT_NOTIFY]	= "CALL_DISCONNECT_NOTIFY",
+	[PPTP_WAN_ERROR_NOTIFY]		= "WAN_ERROR_NOTIFY",
+	[PPTP_SET_LINK_INFO]		= "SET_LINK_INFO"
 };
+
+const char *const pptp_msg_name(u_int16_t msg)
+{
+	if (msg > PPTP_MSG_MAX)
+		return pptp_msg_name_array[0];
+
+	return pptp_msg_name_array[msg];
+}
 EXPORT_SYMBOL(pptp_msg_name);
 #endif
 
@@ -277,7 +285,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 	typeof(nf_nat_pptp_hook_inbound) nf_nat_pptp_inbound;
 
 	msg = ntohs(ctlh->messageType);
-	pr_debug("inbound control message %s\n", pptp_msg_name[msg]);
+	pr_debug("inbound control message %s\n", pptp_msg_name(msg));
 
 	switch (msg) {
 	case PPTP_START_SESSION_REPLY:
@@ -312,7 +320,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 		pcid = pptpReq->ocack.peersCallID;
 		if (info->pns_call_id != pcid)
 			goto invalid;
-		pr_debug("%s, CID=%X, PCID=%X\n", pptp_msg_name[msg],
+		pr_debug("%s, CID=%X, PCID=%X\n", pptp_msg_name(msg),
 			 ntohs(cid), ntohs(pcid));
 
 		if (pptpReq->ocack.resultCode == PPTP_OUTCALL_CONNECT) {
@@ -329,7 +337,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 			goto invalid;
 
 		cid = pptpReq->icreq.callID;
-		pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+		pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid));
 		info->cstate = PPTP_CALL_IN_REQ;
 		info->pac_call_id = cid;
 		break;
@@ -348,7 +356,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 		if (info->pns_call_id != pcid)
 			goto invalid;
 
-		pr_debug("%s, PCID=%X\n", pptp_msg_name[msg], ntohs(pcid));
+		pr_debug("%s, PCID=%X\n", pptp_msg_name(msg), ntohs(pcid));
 		info->cstate = PPTP_CALL_IN_CONF;
 
 		/* we expect a GRE connection from PAC to PNS */
@@ -358,7 +366,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 	case PPTP_CALL_DISCONNECT_NOTIFY:
 		/* server confirms disconnect */
 		cid = pptpReq->disc.callID;
-		pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+		pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid));
 		info->cstate = PPTP_CALL_NONE;
 
 		/* untrack this call id, unexpect GRE packets */
@@ -385,7 +393,7 @@ pptp_inbound_pkt(struct sk_buff *skb, un
 invalid:
 	pr_debug("invalid %s: type=%d cid=%u pcid=%u "
 		 "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
-		 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
+		 pptp_msg_name(msg),
 		 msg, ntohs(cid), ntohs(pcid),  info->cstate, info->sstate,
 		 ntohs(info->pns_call_id), ntohs(info->pac_call_id));
 	return NF_ACCEPT;
@@ -405,7 +413,7 @@ pptp_outbound_pkt(struct sk_buff *skb, u
 	typeof(nf_nat_pptp_hook_outbound) nf_nat_pptp_outbound;
 
 	msg = ntohs(ctlh->messageType);
-	pr_debug("outbound control message %s\n", pptp_msg_name[msg]);
+	pr_debug("outbound control message %s\n", pptp_msg_name(msg));
 
 	switch (msg) {
 	case PPTP_START_SESSION_REQUEST:
@@ -427,7 +435,7 @@ pptp_outbound_pkt(struct sk_buff *skb, u
 		info->cstate = PPTP_CALL_OUT_REQ;
 		/* track PNS call id */
 		cid = pptpReq->ocreq.callID;
-		pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+		pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid));
 		info->pns_call_id = cid;
 		break;
 
@@ -441,7 +449,7 @@ pptp_outbound_pkt(struct sk_buff *skb, u
 		pcid = pptpReq->icack.peersCallID;
 		if (info->pac_call_id != pcid)
 			goto invalid;
-		pr_debug("%s, CID=%X PCID=%X\n", pptp_msg_name[msg],
+		pr_debug("%s, CID=%X PCID=%X\n", pptp_msg_name(msg),
 			 ntohs(cid), ntohs(pcid));
 
 		if (pptpReq->icack.resultCode == PPTP_INCALL_ACCEPT) {
@@ -481,7 +489,7 @@ pptp_outbound_pkt(struct sk_buff *skb, u
 invalid:
 	pr_debug("invalid %s: type=%d cid=%u pcid=%u "
 		 "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
-		 msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
+		 pptp_msg_name(msg),
 		 msg, ntohs(cid), ntohs(pcid),  info->cstate, info->sstate,
 		 ntohs(info->pns_call_id), ntohs(info->pac_call_id));
 	return NF_ACCEPT;

[PATCH 4.9 53/61] qlcnic: fix missing release in qlcnic_83xx_interrupt_test.

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

commit 15c973858903009e995b2037683de29dfe968621 upstream.

In function qlcnic_83xx_interrupt_test(), function
qlcnic_83xx_diag_alloc_res() is not handled by function
qlcnic_83xx_diag_free_res() after a call of the function
qlcnic_alloc_mbx_args() failed. Fix this issue by adding
a jump target "fail_mbx_args", and jump to this new target
when qlcnic_alloc_mbx_args() failed.

Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -3610,7 +3610,7 @@ int qlcnic_83xx_interrupt_test(struct ne
 	ahw->diag_cnt = 0;
 	ret = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST);
 	if (ret)
-		goto fail_diag_irq;
+		goto fail_mbx_args;
 
 	if (adapter->flags & QLCNIC_MSIX_ENABLED)
 		intrpt_id = ahw->intr_tbl[0].id;
@@ -3640,6 +3640,8 @@ int qlcnic_83xx_interrupt_test(struct ne
 
 done:
 	qlcnic_free_mbx_args(&cmd);
+
+fail_mbx_args:
 	qlcnic_83xx_diag_free_res(netdev, drv_sds_rings);
 
 fail_diag_irq:

[PATCH 4.9 54/61] bonding: Fix reference count leak in bond_sysfs_slave_add.

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

commit a068aab42258e25094bc2c159948d263ed7d7a77 upstream.

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.

Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/bonding/bond_sysfs_slave.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -153,8 +153,10 @@ int bond_sysfs_slave_add(struct slave *s
 
 	err = kobject_init_and_add(&slave->kobj, &slave_ktype,
 				   &(slave->dev->dev.kobj), "bonding_slave");
-	if (err)
+	if (err) {
+		kobject_put(&slave->kobj);
 		return err;
+	}
 
 	for (a = slave_attrs; *a; ++a) {
 		err = sysfs_create_file(&slave->kobj, &((*a)->attr));

[PATCH 4.9 55/61] Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"

[Greg Kroah-Hartman]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit f4dec2d6160976b14e54be9c3950ce0f52385741 upstream.

This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin
Locke:

"... nomux only appeared to fix the issue because the controller
continued working after warm reboots. After more thorough testing from
both warm and cold start, I now believe the entry should be added to
i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1
alone is sufficient to avoid the issue from both states while
i8042.nomux is not."

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |    7 -------
 1 file changed, 7 deletions(-)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -545,13 +545,6 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
-	{
-		/* Lenovo ThinkPad Twist S230u */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
-		},
-	},
 	{ }
 };
 

[PATCH 4.9 56/61] netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 4946ea5c1237036155c3b3a24f049fd5f849f8f6 upstream.

>> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
extern const char *const pptp_msg_name(u_int16_t msg);
^~~~~~

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/netfilter/nf_conntrack_pptp.h |    2 +-
 net/netfilter/nf_conntrack_pptp.c           |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/netfilter/nf_conntrack_pptp.h
+++ b/include/linux/netfilter/nf_conntrack_pptp.h
@@ -4,7 +4,7 @@
 
 #include <linux/netfilter/nf_conntrack_common.h>
 
-extern const char *const pptp_msg_name(u_int16_t msg);
+const char *pptp_msg_name(u_int16_t msg);
 
 /* state of the control session */
 enum pptp_ctrlsess_state {
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -90,7 +90,7 @@ static const char *const pptp_msg_name_a
 	[PPTP_SET_LINK_INFO]		= "SET_LINK_INFO"
 };
 
-const char *const pptp_msg_name(u_int16_t msg)
+const char *pptp_msg_name(u_int16_t msg)
 {
 	if (msg > PPTP_MSG_MAX)
 		return pptp_msg_name_array[0];

[PATCH 4.9 57/61] genirq/generic_pending: Do not lose pending affinity update

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit a33a5d2d16cb84bea8d5f5510f3a41aa48b5c467 upstream.

The generic pending interrupt mechanism moves interrupts from the interrupt
handler on the original target CPU to the new destination CPU. This is
required for x86 and ia64 due to the way the interrupt delivery and
acknowledge works if the interrupts are not remapped.

However that update can fail for various reasons. Some of them are valid
reasons to discard the pending update, but the case, when the previous move
has not been fully cleaned up is not a legit reason to fail.

Check the return value of irq_do_set_affinity() for -EBUSY, which indicates
a pending cleanup, and rearm the pending move in the irq dexcriptor so it's
tried again when the next interrupt arrives.

Fixes: 996c591227d9 ("x86/irq: Plug vector cleanup race")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/irq/migration.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -7,17 +7,18 @@
 void irq_move_masked_irq(struct irq_data *idata)
 {
 	struct irq_desc *desc = irq_data_to_desc(idata);
-	struct irq_chip *chip = desc->irq_data.chip;
+	struct irq_data *data = &desc->irq_data;
+	struct irq_chip *chip = data->chip;
 
-	if (likely(!irqd_is_setaffinity_pending(&desc->irq_data)))
+	if (likely(!irqd_is_setaffinity_pending(data)))
 		return;
 
-	irqd_clr_move_pending(&desc->irq_data);
+	irqd_clr_move_pending(data);
 
 	/*
 	 * Paranoia: cpu-local interrupts shouldn't be calling in here anyway.
 	 */
-	if (irqd_is_per_cpu(&desc->irq_data)) {
+	if (irqd_is_per_cpu(data)) {
 		WARN_ON(1);
 		return;
 	}
@@ -42,9 +43,20 @@ void irq_move_masked_irq(struct irq_data
 	 * For correct operation this depends on the caller
 	 * masking the irqs.
 	 */
-	if (cpumask_any_and(desc->pending_mask, cpu_online_mask) < nr_cpu_ids)
-		irq_do_set_affinity(&desc->irq_data, desc->pending_mask, false);
+	if (cpumask_any_and(desc->pending_mask, cpu_online_mask) < nr_cpu_ids) {
+		int ret;
 
+		ret = irq_do_set_affinity(data, desc->pending_mask, false);
+		/*
+		 * If the there is a cleanup pending in the underlying
+		 * vector management, reschedule the move for the next
+		 * interrupt. Leave desc->pending_mask intact.
+		 */
+		if (ret == -EBUSY) {
+			irqd_set_move_pending(data);
+			return;
+		}
+	}
 	cpumask_clear(desc->pending_mask);
 }
 

[PATCH 4.9 58/61] net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags

[Greg Kroah-Hartman]

From: Roopa Prabhu <roopa@cumulusnetworks.com>

commit 56a49d7048703f5ffdb84d3a0ee034108fba6850 upstream.

This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071

Commit 5025f7f7d506 wrongly relied on __dev_change_flags to notify users of
dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED.
Fix it by indicating flag changes explicitly to __dev_notify_flags.

Fixes: 5025f7f7d506 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link")
Reported-By: Liam mcbirnie <liam.mcbirnie@boeing.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/rtnetlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2361,7 +2361,7 @@ int rtnl_configure_link(struct net_devic
 	}
 
 	if (dev->rtnl_link_state == RTNL_LINK_INITIALIZED) {
-		__dev_notify_flags(dev, old_flags, 0U);
+		__dev_notify_flags(dev, old_flags, (old_flags ^ dev->flags));
 	} else {
 		dev->rtnl_link_state = RTNL_LINK_INITIALIZED;
 		__dev_notify_flags(dev, old_flags, ~0U);

[PATCH 4.9 59/61] mm/vmalloc.c: dont dereference possible NULL pointer in __vunmap()

[Greg Kroah-Hartman]

From: Liviu Dudau <liviu@dudau.co.uk>

commit 6ade20327dbb808882888ed8ccded71e93067cf9 upstream.

find_vmap_area() can return a NULL pointer and we're going to
dereference it without checking it first.  Use the existing
find_vm_area() function which does exactly what we want and checks for
the NULL pointer.

Link: http://lkml.kernel.org/r/20181228171009.22269-1-liviu@dudau.co.uk
Fixes: f3c01d2f3ade ("mm: vmalloc: avoid racy handling of debugobjects in vunmap")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmalloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1499,7 +1499,7 @@ static void __vunmap(const void *addr, i
 			addr))
 		return;
 
-	area = find_vmap_area((unsigned long)addr)->vm;
+	area = find_vm_area(addr);
 	if (unlikely(!area)) {
 		WARN(1, KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
 				addr);

[PATCH 4.9 60/61] sc16is7xx: move label err_spi to correct section

[Greg Kroah-Hartman]

From: Guoqing Jiang <gqjiang@suse.com>

commit e00164a0f000de893944981f41a568c981aca658 upstream.

err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make
the label only available under SERIAL_SC16IS7XX_SPI option.
Otherwise, the below warning appears.

drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label]
 err_spi:
  ^~~~~~~

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/sc16is7xx.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1523,10 +1523,12 @@ static int __init sc16is7xx_init(void)
 #endif
 	return ret;
 
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
 err_spi:
 #ifdef CONFIG_SERIAL_SC16IS7XX_I2C
 	i2c_del_driver(&sc16is7xx_i2c_uart_driver);
 #endif
+#endif
 err_i2c:
 	uart_unregister_driver(&sc16is7xx_uart);
 	return ret;

[PATCH 4.9 61/61] net: hns: Fixes the missing put_device in positive leg for roce reset

[Greg Kroah-Hartman]

From: Salil Mehta <salil.mehta@huawei.com>

commit 4d96e13ee9cd1f7f801e8c7f4b12f09d1da4a5d8 upstream.

This patch fixes the missing device reference release-after-use in
the positive leg of the roce reset API of the HNS DSAF.

Fixes: c969c6e7ab8c ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2867,6 +2867,9 @@ int hns_dsaf_roce_reset(struct fwnode_ha
 		dsaf_set_bit(credit, DSAF_SBM_ROCEE_CFG_CRD_EN_B, 1);
 		dsaf_write_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG, credit);
 	}
+
+	put_device(&pdev->dev);
+
 	return 0;
 }
 EXPORT_SYMBOL(hns_dsaf_roce_reset);

Re: [PATCH 4.9 00/61] 4.9.226-rc1 review

[Guenter Roeck]

On 6/1/20 10:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.226 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Jun 2020 17:38:19 +0000.
> Anything received after that time might be too late.
> 

Lots of errors along the line of

arch/arm/lib/clear_user.S: Assembler messages:
arch/arm/lib/clear_user.S:33: Error: bad instruction `strbtal r2,[r0],#1'
arch/arm/lib/clear_user.S:34: Error: bad instruction `strbtle r2,[r0],#1'
arch/arm/lib/clear_user.S:35: Error: bad instruction `strbtlt r2,[r0],#1'
arch/arm/lib/clear_user.S:39: Error: bad instruction `strtpl r2,[r0],#4'
arch/arm/lib/clear_user.S:39: Error: bad instruction `strtpl r2,[r0],#4'
arch/arm/lib/clear_user.S:42: Error: bad instruction `strtpl r2,[r0],#4'
arch/arm/lib/clear_user.S:44: Error: bad instruction `strbtne r2,[r0],#1'
arch/arm/lib/clear_user.S:44: Error: bad instruction `strbtne r2,[r0],#1'

Bisect log below.

Guenter

---
# bad: [f7c3cc559c2e60aedae9799208fc8dd85211b971] Linux 4.9.226-rc1
# good: [82dddebfe7da9d2670977ab723da2fdac3eff5b0] Linux 4.9.225
git bisect start 'HEAD' 'v4.9.225'
# bad: [d1560c566028eb1ce2b446ef1ce8e36cb85f58e5] ARM: dts: imx: Correct B850v3 clock assignment
git bisect bad d1560c566028eb1ce2b446ef1ce8e36cb85f58e5
# good: [3a416993574184aefe8abe230bfcfae7464f438e] gfs2: move privileged user check to gfs2_quota_lock_check
git bisect good 3a416993574184aefe8abe230bfcfae7464f438e
# good: [1b96153fc668b0ba6fcc8c05729898773c5bf9cf] Input: xpad - add custom init packet for Xbox One S controllers
git bisect good 1b96153fc668b0ba6fcc8c05729898773c5bf9cf
# bad: [b6eb3d378d94ebcfd35ebc881310b6dc684ca7a6] ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h
git bisect bad b6eb3d378d94ebcfd35ebc881310b6dc684ca7a6
# good: [a4174aaf3c0998c50023fabf48f4107286fe30e6] Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()
git bisect good a4174aaf3c0998c50023fabf48f4107286fe30e6
# bad: [db2e66e6d39b037c9538edc5b85094b70fff97ab] ARM: 8843/1: use unified assembler in headers
git bisect bad db2e66e6d39b037c9538edc5b85094b70fff97ab
# first bad commit: [db2e66e6d39b037c9538edc5b85094b70fff97ab] ARM: 8843/1: use unified assembler in headers