[PATCH 5.7 00/24] 5.7.2-rc1 review

[PATCH 5.7 00/24] 5.7.2-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.7.2 release.
There are 24 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.7.2-rc1

Oleg Nesterov <oleg@redhat.com>
    uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned

Josh Poimboeuf <jpoimboe@redhat.com>
    x86/speculation: Add Ivy Bridge to affected list

Mark Gross <mgross@linux.intel.com>
    x86/speculation: Add SRBDS vulnerability and mitigation documentation

Mark Gross <mgross@linux.intel.com>
    x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation

Mark Gross <mgross@linux.intel.com>
    x86/cpu: Add 'table' argument to cpu_matches()

Mark Gross <mgross@linux.intel.com>
    x86/cpu: Add a steppings field to struct x86_cpu_id

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    nvmem: qfprom: remove incorrect write support

Oliver Neukum <oneukum@suse.com>
    CDC-ACM: heed quirk also in error handling

Pascal Terjan <pterjan@google.com>
    staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK

Jiri Slaby <jslaby@suse.cz>
    tty: hvc_console, fix crashes on parallel open/close

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    vt: keyboard: avoid signed integer overflow in k_ascii

Josh Triplett <josh@joshtriplett.org>
    serial: 8250: Enable 16550A variants by default on non-x86

Paul Cercueil <paul@crapouillou.net>
    usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set

Dinghao Liu <dinghao.liu@zju.edu.cn>
    usb: musb: Fix runtime PM imbalance on error

Bin Liu <b-liu@ti.com>
    usb: musb: start session in resume for host port

Fabrice Gasnier <fabrice.gasnier@st.com>
    iio: adc: stm32-adc: fix a wrong error message when probing interrupts

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.

Mathieu Othacehe <m.othacehe@gmail.com>
    iio: vcnl4000: Fix i2c swapped word reading.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:chemical:sps30: Fix timestamp alignment

Johan Hovold <johan@kernel.org>
    USB: serial: ch341: fix lockup of devices with limited prescaler

Michael Hanselmann <public@hansmi.ch>
    USB: serial: ch341: add basis for quirk detection

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit LE910C1-EUX compositions

Bin Liu <b-liu@ti.com>
    USB: serial: usb_wwan: do not resubmit rx urb on fatal errors

Matt Jolly <Kangie@footclan.ninja>
    USB: serial: qcserial: add DW5816e QDL support


-------------

Diffstat:

 Documentation/ABI/testing/sysfs-devices-system-cpu |   1 +
 Documentation/admin-guide/hw-vuln/index.rst        |   1 +
 .../special-register-buffer-data-sampling.rst      | 149 +++++++++++++++++++++
 Documentation/admin-guide/kernel-parameters.txt    |  20 +++
 Makefile                                           |   4 +-
 arch/x86/include/asm/cpu_device_id.h               |  27 +++-
 arch/x86/include/asm/cpufeatures.h                 |   2 +
 arch/x86/include/asm/msr-index.h                   |   4 +
 arch/x86/kernel/cpu/bugs.c                         | 106 +++++++++++++++
 arch/x86/kernel/cpu/common.c                       |  56 ++++++--
 arch/x86/kernel/cpu/cpu.h                          |   1 +
 arch/x86/kernel/cpu/match.c                        |   7 +-
 drivers/base/cpu.c                                 |   8 ++
 drivers/iio/adc/stm32-adc-core.c                   |  34 ++---
 drivers/iio/chemical/pms7003.c                     |  17 ++-
 drivers/iio/chemical/sps30.c                       |   9 +-
 drivers/iio/light/vcnl4000.c                       |   6 +-
 drivers/nvmem/qfprom.c                             |  14 --
 drivers/staging/rtl8712/wifi.h                     |   9 +-
 drivers/tty/hvc/hvc_console.c                      |  23 ++--
 drivers/tty/serial/8250/Kconfig                    |   1 +
 drivers/tty/vt/keyboard.c                          |  26 ++--
 drivers/usb/class/cdc-acm.c                        |   2 +-
 drivers/usb/musb/jz4740.c                          |   4 +-
 drivers/usb/musb/musb_core.c                       |   7 +
 drivers/usb/musb/musb_debugfs.c                    |  10 +-
 drivers/usb/serial/ch341.c                         |  68 +++++++++-
 drivers/usb/serial/option.c                        |   4 +
 drivers/usb/serial/qcserial.c                      |   1 +
 drivers/usb/serial/usb_wwan.c                      |   4 +
 include/linux/mod_devicetable.h                    |   2 +
 kernel/events/uprobes.c                            |  16 ++-
 32 files changed, 532 insertions(+), 111 deletions(-)

[PATCH 5.7 01/24] USB: serial: qcserial: add DW5816e QDL support

[Greg Kroah-Hartman]

From: Matt Jolly <Kangie@footclan.ninja>

commit 3429444abdd9dbd5faebd9bee552ec6162b17ad6 upstream.

Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode /
QDL download mode) to drivers/usb/serial/qcserial.c

This is required to update device firmware.

Signed-off-by: Matt Jolly <Kangie@footclan.ninja>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -173,6 +173,7 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
 	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
 	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81cb)},	/* Dell Wireless 5816e QDL */
 	{DEVICE_SWI(0x413c, 0x81cc)},	/* Dell Wireless 5816e */
 	{DEVICE_SWI(0x413c, 0x81cf)},   /* Dell Wireless 5819 */
 	{DEVICE_SWI(0x413c, 0x81d0)},   /* Dell Wireless 5819 */

[PATCH 5.7 02/24] USB: serial: usb_wwan: do not resubmit rx urb on fatal errors

[Greg Kroah-Hartman]

From: Bin Liu <b-liu@ti.com>

commit 986c1748c84d7727defeaeca74a73b37f7d5cce1 upstream.

usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb
status is a fatal error. Or the usb controller would keep processing the
new urbs then run into interrupt storm, and has no chance to recover.

Fixes: 6c1ee66a0b2b ("USB-Serial: Fix error handling of usb_wwan")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/usb_wwan.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -270,6 +270,10 @@ static void usb_wwan_indat_callback(stru
 	if (status) {
 		dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
 			__func__, status, endpoint);
+
+		/* don't resubmit on fatal errors */
+		if (status == -ESHUTDOWN || status == -ENOENT)
+			return;
 	} else {
 		if (urb->actual_length) {
 			tty_insert_flip_string(&port->port, data,

[PATCH 5.7 03/24] USB: serial: option: add Telit LE910C1-EUX compositions

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit 399ad9477c523f721f8e51d4f824bdf7267f120c upstream.

Add Telit LE910C1-EUX compositions:

	0x1031: tty, tty, tty, rmnet
	0x1033: tty, tty, tty, ecm

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1157,6 +1157,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1031, 0xff),	/* Telit LE910C1-EUX */
+	 .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff),	/* Telit LE910C1-EUX (ECM) */
+	 .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
 	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),

[PATCH 5.7 04/24] USB: serial: ch341: add basis for quirk detection

[Greg Kroah-Hartman]

From: Michael Hanselmann <public@hansmi.ch>

commit c404bf4aa9236cb4d1068e499ae42acf48a6ff97 upstream.

A subset of CH341 devices does not support all features, namely the
prescaler is limited to a reduced precision and there is no support for
sending a RS232 break condition. This patch adds a detection function
which will be extended to set quirk flags as they're implemented.

The author's affected device has an imprint of "340" on the
turquoise-colored plug, but not all such devices appear to be affected.

Signed-off-by: Michael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/1e1ae0da6082bb528a44ef323d4e1d3733d38858.1585697281.git.public@hansmi.ch
[ johan: use long type for quirks; rephrase and use port device for
	 messages; handle short reads; set quirk flags directly in
	 helper function ]
Cc: stable <stable@vger.kernel.org>	# 5.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ch341.c |   53 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -87,6 +87,7 @@ struct ch341_private {
 	u8 mcr;
 	u8 msr;
 	u8 lcr;
+	unsigned long quirks;
 };
 
 static void ch341_set_termios(struct tty_struct *tty,
@@ -308,6 +309,53 @@ out:	kfree(buffer);
 	return r;
 }
 
+static int ch341_detect_quirks(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	const unsigned int size = 2;
+	unsigned long quirks = 0;
+	char *buffer;
+	int r;
+
+	buffer = kmalloc(size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	/*
+	 * A subset of CH34x devices does not support all features. The
+	 * prescaler is limited and there is no support for sending a RS232
+	 * break condition. A read failure when trying to set up the latter is
+	 * used to detect these devices.
+	 */
+	r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), CH341_REQ_READ_REG,
+			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			    CH341_REG_BREAK, 0, buffer, size, DEFAULT_TIMEOUT);
+	if (r == -EPIPE) {
+		dev_dbg(&port->dev, "break control not supported\n");
+		r = 0;
+		goto out;
+	}
+
+	if (r != size) {
+		if (r >= 0)
+			r = -EIO;
+		dev_err(&port->dev, "failed to read break control: %d\n", r);
+		goto out;
+	}
+
+	r = 0;
+out:
+	kfree(buffer);
+
+	if (quirks) {
+		dev_dbg(&port->dev, "enabling quirk flags: 0x%02lx\n", quirks);
+		priv->quirks |= quirks;
+	}
+
+	return r;
+}
+
 static int ch341_port_probe(struct usb_serial_port *port)
 {
 	struct ch341_private *priv;
@@ -330,6 +378,11 @@ static int ch341_port_probe(struct usb_s
 		goto error;
 
 	usb_set_serial_port_data(port, priv);
+
+	r = ch341_detect_quirks(port);
+	if (r < 0)
+		goto error;
+
 	return 0;
 
 error:	kfree(priv);

[PATCH 5.7 05/24] USB: serial: ch341: fix lockup of devices with limited prescaler

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit c432df155919582a3cefa35a8f86256c830fa9a4 upstream.

Michael Hanselmann reports that

	[a] subset of all CH341 devices stop responding to bulk
	transfers, usually after the third byte, when the highest
	prescaler bit (0b100) is set. There is one exception, namely a
	prescaler of exactly 0b111 (fact=1, ps=3).

Fix this by forcing a lower base clock (fact = 0) whenever needed.

This specifically makes the standard rates 110, 134 and 200 bps work
again with these devices.

Fixes: 35714565089e ("USB: serial: ch341: reimplement line-speed handling")
Cc: stable <stable@vger.kernel.org>	# 5.5
Reported-by: Michael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/20200514141743.GE25962@localhost
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ch341.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -73,6 +73,8 @@
 #define CH341_LCR_CS6          0x01
 #define CH341_LCR_CS5          0x00
 
+#define CH341_QUIRK_LIMITED_PRESCALER	BIT(0)
+
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
@@ -160,9 +162,11 @@ static const speed_t ch341_min_rates[] =
  *		2 <= div <= 256 if fact = 0, or
  *		9 <= div <= 256 if fact = 1
  */
-static int ch341_get_divisor(speed_t speed)
+static int ch341_get_divisor(struct ch341_private *priv)
 {
 	unsigned int fact, div, clk_div;
+	speed_t speed = priv->baud_rate;
+	bool force_fact0 = false;
 	int ps;
 
 	/*
@@ -188,8 +192,12 @@ static int ch341_get_divisor(speed_t spe
 	clk_div = CH341_CLK_DIV(ps, fact);
 	div = CH341_CLKRATE / (clk_div * speed);
 
+	/* Some devices require a lower base clock if ps < 3. */
+	if (ps < 3 && (priv->quirks & CH341_QUIRK_LIMITED_PRESCALER))
+		force_fact0 = true;
+
 	/* Halve base clock (fact = 0) if required. */
-	if (div < 9 || div > 255) {
+	if (div < 9 || div > 255 || force_fact0) {
 		div /= 2;
 		clk_div *= 2;
 		fact = 0;
@@ -228,7 +236,7 @@ static int ch341_set_baudrate_lcr(struct
 	if (!priv->baud_rate)
 		return -EINVAL;
 
-	val = ch341_get_divisor(priv->baud_rate);
+	val = ch341_get_divisor(priv);
 	if (val < 0)
 		return -EINVAL;
 
@@ -333,6 +341,7 @@ static int ch341_detect_quirks(struct us
 			    CH341_REG_BREAK, 0, buffer, size, DEFAULT_TIMEOUT);
 	if (r == -EPIPE) {
 		dev_dbg(&port->dev, "break control not supported\n");
+		quirks = CH341_QUIRK_LIMITED_PRESCALER;
 		r = 0;
 		goto out;
 	}

[PATCH 5.7 06/24] iio:chemical:sps30: Fix timestamp alignment

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit a5bf6fdd19c327bcfd9073a8740fa19ca4525fd4 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.

Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/chemical/sps30.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -230,15 +230,18 @@ static irqreturn_t sps30_trigger_handler
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct sps30_state *state = iio_priv(indio_dev);
 	int ret;
-	s32 data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */
+	struct {
+		s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
+		s64 ts;
+	} scan;
 
 	mutex_lock(&state->lock);
-	ret = sps30_do_meas(state, data, 4);
+	ret = sps30_do_meas(state, scan.data, ARRAY_SIZE(scan.data));
 	mutex_unlock(&state->lock);
 	if (ret)
 		goto err;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data,
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
 					   iio_get_time_ns(indio_dev));
 err:
 	iio_trigger_notify_done(indio_dev->trig);

[PATCH 5.7 07/24] iio: vcnl4000: Fix i2c swapped word reading.

[Greg Kroah-Hartman]

From: Mathieu Othacehe <m.othacehe@gmail.com>

commit 18dfb5326370991c81a6d1ed6d1aeee055cb8c05 upstream.

The bytes returned by the i2c reading need to be swapped
unconditionally. Otherwise, on be16 platforms, an incorrect value will be
returned.

Taking the slow path via next merge window as its been around a while
and we have a patch set dependent on this which would be held up.

Fixes: 62a1efb9f868 ("iio: add vcnl4000 combined ALS and proximity sensor")
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/vcnl4000.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -219,7 +219,6 @@ static int vcnl4000_measure(struct vcnl4
 				u8 rdy_mask, u8 data_reg, int *val)
 {
 	int tries = 20;
-	__be16 buf;
 	int ret;
 
 	mutex_lock(&data->vcnl4000_lock);
@@ -246,13 +245,12 @@ static int vcnl4000_measure(struct vcnl4
 		goto fail;
 	}
 
-	ret = i2c_smbus_read_i2c_block_data(data->client,
-		data_reg, sizeof(buf), (u8 *) &buf);
+	ret = i2c_smbus_read_word_swapped(data->client, data_reg);
 	if (ret < 0)
 		goto fail;
 
 	mutex_unlock(&data->vcnl4000_lock);
-	*val = be16_to_cpu(buf);
+	*val = ret;
 
 	return 0;
 

[PATCH 5.7 08/24] iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 13e945631c2ffb946c0af342812a3cd39227de6e upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc so no
data can leak appart from previous readings.

Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/chemical/pms7003.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/iio/chemical/pms7003.c
+++ b/drivers/iio/chemical/pms7003.c
@@ -73,6 +73,11 @@ struct pms7003_state {
 	struct pms7003_frame frame;
 	struct completion frame_ready;
 	struct mutex lock; /* must be held whenever state gets touched */
+	/* Used to construct scan to push to the IIO buffer */
+	struct {
+		u16 data[3]; /* PM1, PM2P5, PM10 */
+		s64 ts;
+	} scan;
 };
 
 static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd)
@@ -104,7 +109,6 @@ static irqreturn_t pms7003_trigger_handl
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct pms7003_state *state = iio_priv(indio_dev);
 	struct pms7003_frame *frame = &state->frame;
-	u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */
 	int ret;
 
 	mutex_lock(&state->lock);
@@ -114,12 +118,15 @@ static irqreturn_t pms7003_trigger_handl
 		goto err;
 	}
 
-	data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET);
-	data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET);
-	data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET);
+	state->scan.data[PM1] =
+		pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET);
+	state->scan.data[PM2P5] =
+		pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET);
+	state->scan.data[PM10] =
+		pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET);
 	mutex_unlock(&state->lock);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data,
+	iio_push_to_buffers_with_timestamp(indio_dev, &state->scan,
 					   iio_get_time_ns(indio_dev));
 err:
 	iio_trigger_notify_done(indio_dev->trig);

[PATCH 5.7 09/24] iio: adc: stm32-adc: fix a wrong error message when probing interrupts

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@st.com>

commit 10134ec3f8cefa6a40fe84987f1795e9e0da9715 upstream.

A wrong error message is printed out currently, like on STM32MP15:
- stm32-adc-core 48003000.adc: IRQ index 2 not found.

This is seen since commit 7723f4c5ecdb ("driver core: platform: Add an
error message to platform_get_irq*()").
The STM32 ADC core driver wrongly requests up to 3 interrupt lines. It
should request only the necessary IRQs, based on the compatible:
- stm32f4/h7 ADCs share a common interrupt
- stm32mp1, has one interrupt line per ADC.
So add the number of required interrupts to the compatible data.

Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/stm32-adc-core.c |   34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -65,12 +65,14 @@ struct stm32_adc_priv;
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  * @has_syscfg: SYSCFG capability flags
+ * @num_irqs:	number of interrupt lines
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
 	u32 max_clk_rate_hz;
 	unsigned int has_syscfg;
+	unsigned int num_irqs;
 };
 
 /**
@@ -375,21 +377,15 @@ static int stm32_adc_irq_probe(struct pl
 	struct device_node *np = pdev->dev.of_node;
 	unsigned int i;
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+	/*
+	 * Interrupt(s) must be provided, depending on the compatible:
+	 * - stm32f4/h7 shares a common interrupt line.
+	 * - stm32mp1, has one line per ADC
+	 */
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
 		priv->irq[i] = platform_get_irq(pdev, i);
-		if (priv->irq[i] < 0) {
-			/*
-			 * At least one interrupt must be provided, make others
-			 * optional:
-			 * - stm32f4/h7 shares a common interrupt.
-			 * - stm32mp1, has one line per ADC (either for ADC1,
-			 *   ADC2 or both).
-			 */
-			if (i && priv->irq[i] == -ENXIO)
-				continue;
-
+		if (priv->irq[i] < 0)
 			return priv->irq[i];
-		}
 	}
 
 	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -400,9 +396,7 @@ static int stm32_adc_irq_probe(struct pl
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
-		if (priv->irq[i] < 0)
-			continue;
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
 		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
 		irq_set_handler_data(priv->irq[i], priv);
 	}
@@ -420,11 +414,8 @@ static void stm32_adc_irq_remove(struct
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
-		if (priv->irq[i] < 0)
-			continue;
+	for (i = 0; i < priv->cfg->num_irqs; i++)
 		irq_set_chained_handler(priv->irq[i], NULL);
-	}
 }
 
 static int stm32_adc_core_switches_supply_en(struct stm32_adc_priv *priv,
@@ -817,6 +808,7 @@ static const struct stm32_adc_priv_cfg s
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
+	.num_irqs = 1,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
@@ -824,6 +816,7 @@ static const struct stm32_adc_priv_cfg s
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER,
+	.num_irqs = 1,
 };
 
 static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
@@ -831,6 +824,7 @@ static const struct stm32_adc_priv_cfg s
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 40000000,
 	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
+	.num_irqs = 2,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {

[PATCH 5.7 10/24] usb: musb: start session in resume for host port

[Greg Kroah-Hartman]

From: Bin Liu <b-liu@ti.com>

commit 7f88a5ac393f39319f69b8b20cc8d5759878d1a1 upstream.

Commit 17539f2f4f0b ("usb: musb: fix enumeration after resume") replaced
musb_start() in musb_resume() to not override softconnect bit, but it
doesn't restart the session for host port which was done in musb_start().
The session could be disabled in musb_suspend(), which leads the host
port doesn't stay in host mode.

So let's start the session specifically for host port in musb_resume().

Fixes: 17539f2f4f0b ("usb: musb: fix enumeration after resume")

Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-3-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_core.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2877,6 +2877,13 @@ static int musb_resume(struct device *de
 	musb_enable_interrupts(musb);
 	musb_platform_enable(musb);
 
+	/* session might be disabled in suspend */
+	if (musb->port_mode == MUSB_HOST &&
+	    !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) {
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+	}
+
 	spin_lock_irqsave(&musb->lock, flags);
 	error = musb_run_resume_work(musb);
 	if (error)

[PATCH 5.7 11/24] usb: musb: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

commit e4befc121df03dc8ed2ac1031c98f9538e244bae upstream.

When copy_from_user() returns an error code, there
is a runtime PM usage counter imbalance.

Fix this by moving copy_from_user() to the beginning
of this function.

Fixes: 7b6c1b4c0e1e ("usb: musb: fix runtime PM in debugfs")

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_debugfs.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -168,6 +168,11 @@ static ssize_t musb_test_mode_write(stru
 	u8			test;
 	char			buf[24];
 
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
 	pm_runtime_get_sync(musb->controller);
 	test = musb_readb(musb->mregs, MUSB_TESTMODE);
 	if (test) {
@@ -176,11 +181,6 @@ static ssize_t musb_test_mode_write(stru
 		goto ret;
 	}
 
-	memset(buf, 0x00, sizeof(buf));
-
-	if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
-		return -EFAULT;
-
 	if (strstarts(buf, "force host full-speed"))
 		test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
 

[PATCH 5.7 12/24] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set

[Greg Kroah-Hartman]

From: Paul Cercueil <paul@crapouillou.net>

commit 685f5f24108a5f3481da70ee75a1b18b9de34257 upstream.

The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.

Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")

Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/jz4740.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -30,11 +30,11 @@ static irqreturn_t jz4740_musb_interrupt
 	irqreturn_t	retval = IRQ_NONE, retval_dma = IRQ_NONE;
 	struct musb	*musb = __hci;
 
-	spin_lock_irqsave(&musb->lock, flags);
-
 	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
 		retval_dma = dma_controller_irq(irq, musb->dma_controller);
 
+	spin_lock_irqsave(&musb->lock, flags);
+
 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);

[PATCH 5.7 13/24] serial: 8250: Enable 16550A variants by default on non-x86

[Greg Kroah-Hartman]

From: Josh Triplett <josh@joshtriplett.org>

commit 15a3f03d5ec0118f1e5db3fc1018686e72744e37 upstream.

Some embedded devices still use these serial ports; make sure they're
still enabled by default on architectures more likely to have them, to
avoid rendering someone's console unavailable.

Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/a20b5fb7dd295cfb48160eecf4bdebd76332d67d.1590509426.git.josh@joshtriplett.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -63,6 +63,7 @@ config SERIAL_8250_PNP
 config SERIAL_8250_16550A_VARIANTS
 	bool "Support for variants of the 16550A serial port"
 	depends on SERIAL_8250
+	default !X86
 	help
 	  The 8250 driver can probe for many variants of the venerable 16550A
 	  serial port. Doing so takes additional time at boot.

[PATCH 5.7 14/24] vt: keyboard: avoid signed integer overflow in k_ascii

[Greg Kroah-Hartman]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit b86dab054059b970111b5516ae548efaae5b3aae upstream.

When k_ascii is invoked several times in a row there is a potential for
signed integer overflow:

UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow:
10 * 1111111111 cannot be represented in type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 ubsan_epilogue+0xe/0x30 lib/ubsan.c:154
 handle_overflow+0xdc/0xf0 lib/ubsan.c:184
 __ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205
 k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888
 kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline]
 kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495

While it can be worked around by using check_mul_overflow()/
check_add_overflow(), it is better to introduce a separate flag to
signal that number pad is being used to compose a symbol, and
change type of the accumulator from signed to unsigned, thus
avoiding undefined behavior when it overflows.

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200525232740.GA262061@dtor-ws
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/keyboard.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -127,7 +127,11 @@ static DEFINE_SPINLOCK(func_buf_lock); /
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static bool dead_key_next;
-static int npadch = -1;					/* -1 or number assembled on pad */
+
+/* Handles a number being assembled on the number pad */
+static bool npadch_active;
+static unsigned int npadch_value;
+
 static unsigned int diacr;
 static char rep;					/* flag telling character repeat */
 
@@ -845,12 +849,12 @@ static void k_shift(struct vc_data *vc,
 		shift_state &= ~(1 << value);
 
 	/* kludge */
-	if (up_flag && shift_state != old_state && npadch != -1) {
+	if (up_flag && shift_state != old_state && npadch_active) {
 		if (kbd->kbdmode == VC_UNICODE)
-			to_utf8(vc, npadch);
+			to_utf8(vc, npadch_value);
 		else
-			put_queue(vc, npadch & 0xff);
-		npadch = -1;
+			put_queue(vc, npadch_value & 0xff);
+		npadch_active = false;
 	}
 }
 
@@ -868,7 +872,7 @@ static void k_meta(struct vc_data *vc, u
 
 static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
 {
-	int base;
+	unsigned int base;
 
 	if (up_flag)
 		return;
@@ -882,10 +886,12 @@ static void k_ascii(struct vc_data *vc,
 		base = 16;
 	}
 
-	if (npadch == -1)
-		npadch = value;
-	else
-		npadch = npadch * base + value;
+	if (!npadch_active) {
+		npadch_value = 0;
+		npadch_active = true;
+	}
+
+	npadch_value = npadch_value * base + value;
 }
 
 static void k_lock(struct vc_data *vc, unsigned char value, char up_flag)

[PATCH 5.7 15/24] tty: hvc_console, fix crashes on parallel open/close

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

commit 24eb2377f977fe06d84fca558f891f95bc28a449 upstream.

hvc_open sets tty->driver_data to NULL when open fails at some point.
Typically, the failure happens in hp->ops->notifier_add(). If there is
a racing process which tries to open such mangled tty, which was not
closed yet, the process will crash in hvc_open as tty->driver_data is
NULL.

All this happens because close wants to know whether open failed or not.
But ->open should not NULL this and other tty fields for ->close to be
happy. ->open should call tty_port_set_initialized(true) and close
should check by tty_port_initialized() instead. So do this properly in
this driver.

So this patch removes these from ->open:
* tty_port_tty_set(&hp->port, NULL). This happens on last close.
* tty->driver_data = NULL. Dtto.
* tty_port_put(&hp->port). This happens in shutdown and until now, this
  must have been causing a reference underflow, if I am not missing
  something.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: Raghavendra <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200526145632.13879-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/hvc/hvc_console.c |   23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -371,15 +371,14 @@ static int hvc_open(struct tty_struct *t
 	 * tty fields and return the kref reference.
 	 */
 	if (rc) {
-		tty_port_tty_set(&hp->port, NULL);
-		tty->driver_data = NULL;
-		tty_port_put(&hp->port);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
-	} else
+	} else {
 		/* We are ready... raise DTR/RTS */
 		if (C_BAUD(tty))
 			if (hp->ops->dtr_rts)
 				hp->ops->dtr_rts(hp, 1);
+		tty_port_set_initialized(&hp->port, true);
+	}
 
 	/* Force wakeup of the polling thread */
 	hvc_kick();
@@ -389,22 +388,12 @@ static int hvc_open(struct tty_struct *t
 
 static void hvc_close(struct tty_struct *tty, struct file * filp)
 {
-	struct hvc_struct *hp;
+	struct hvc_struct *hp = tty->driver_data;
 	unsigned long flags;
 
 	if (tty_hung_up_p(filp))
 		return;
 
-	/*
-	 * No driver_data means that this close was issued after a failed
-	 * hvc_open by the tty layer's release_dev() function and we can just
-	 * exit cleanly because the kref reference wasn't made.
-	 */
-	if (!tty->driver_data)
-		return;
-
-	hp = tty->driver_data;
-
 	spin_lock_irqsave(&hp->port.lock, flags);
 
 	if (--hp->port.count == 0) {
@@ -412,6 +401,9 @@ static void hvc_close(struct tty_struct
 		/* We are done with the tty pointer now. */
 		tty_port_tty_set(&hp->port, NULL);
 
+		if (!tty_port_initialized(&hp->port))
+			return;
+
 		if (C_HUPCL(tty))
 			if (hp->ops->dtr_rts)
 				hp->ops->dtr_rts(hp, 0);
@@ -428,6 +420,7 @@ static void hvc_close(struct tty_struct
 		 * waking periodically to check chars_in_buffer().
 		 */
 		tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
+		tty_port_set_initialized(&hp->port, false);
 	} else {
 		if (hp->port.count < 0)
 			printk(KERN_ERR "hvc_close %X: oops, count is %d\n",

[PATCH 5.7 16/24] staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK

[Greg Kroah-Hartman]

From: Pascal Terjan <pterjan@google.com>

commit 15ea976a1f12b5fd76b1bd6ff3eb5132fd28047f upstream.

The value in shared headers was fixed 9 years ago in commit 8d661f1e462d
("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and
while looking at using shared headers for other duplicated constants
I noticed this driver uses the old value.

The macros are also defined twice in this file so I am deleting the
second definition.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200523211247.23262-1-pterjan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8712/wifi.h |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/drivers/staging/rtl8712/wifi.h
+++ b/drivers/staging/rtl8712/wifi.h
@@ -440,7 +440,7 @@ static inline unsigned char *get_hdr_bss
 /* block-ack parameters */
 #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
 #define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
 #define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
 #define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
 
@@ -532,13 +532,6 @@ struct ieee80211_ht_addt_info {
 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
 #define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
 
-/* block-ack parameters */
-#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
-#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
-#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
-#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
-
 /*
  * A-PMDU buffer sizes
  * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)

[PATCH 5.7 17/24] CDC-ACM: heed quirk also in error handling

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 97fe809934dd2b0b37dfef3a2fc70417f485d7af upstream.

If buffers are iterated over in the error case, the lower limits
for quirky devices must be heeded.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Fixes: a4e7279cd1d19 ("cdc-acm: introduce a cool down")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526124420.22160-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -584,7 +584,7 @@ static void acm_softint(struct work_stru
 	}
 
 	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
-		for (i = 0; i < ACM_NR; i++) 
+		for (i = 0; i < acm->rx_buflimit; i++)
 			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
 					acm_submit_read_urb(acm, i, GFP_NOIO);
 	}

[PATCH 5.7 18/24] nvmem: qfprom: remove incorrect write support

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

commit 8d9eb0d6d59a5d7028c80a30831143d3e75515a7 upstream.

qfprom has different address spaces for read and write. Reads are
always done from corrected address space, where as writes are done
on raw address space.
Writing to corrected address space is invalid and ignored, so it
does not make sense to have this support in the driver which only
supports corrected address space regions at the moment.

Fixes: 4ab11996b489 ("nvmem: qfprom: Add Qualcomm QFPROM support.")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200522113341.7728-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvmem/qfprom.c |   14 --------------
 1 file changed, 14 deletions(-)

--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -27,25 +27,11 @@ static int qfprom_reg_read(void *context
 	return 0;
 }
 
-static int qfprom_reg_write(void *context,
-			 unsigned int reg, void *_val, size_t bytes)
-{
-	struct qfprom_priv *priv = context;
-	u8 *val = _val;
-	int i = 0, words = bytes;
-
-	while (words--)
-		writeb(*val++, priv->base + reg + i++);
-
-	return 0;
-}
-
 static struct nvmem_config econfig = {
 	.name = "qfprom",
 	.stride = 1,
 	.word_size = 1,
 	.reg_read = qfprom_reg_read,
-	.reg_write = qfprom_reg_write,
 };
 
 static int qfprom_probe(struct platform_device *pdev)

[PATCH 5.7 19/24] x86/cpu: Add a steppings field to struct x86_cpu_id

[Greg Kroah-Hartman]

From: Mark Gross <mgross@linux.intel.com>

commit e9d7144597b10ff13ff2264c059f7d4a7fbc89ac upstream

Intel uses the same family/model for several CPUs. Sometimes the
stepping must be checked to tell them apart.

On x86 there can be at most 16 steppings. Add a steppings bitmask to
x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro
and support for matching against family/model/stepping.

 [ bp: Massage. ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpu_device_id.h |   27 ++++++++++++++++++++++++---
 arch/x86/kernel/cpu/match.c          |    7 ++++++-
 include/linux/mod_devicetable.h      |    2 ++
 3 files changed, 32 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/cpu_device_id.h
+++ b/arch/x86/include/asm/cpu_device_id.h
@@ -20,12 +20,14 @@
 #define X86_CENTAUR_FAM6_C7_D		0xd
 #define X86_CENTAUR_FAM6_NANO		0xf
 
+#define X86_STEPPINGS(mins, maxs)    GENMASK(maxs, mins)
 /**
- * X86_MATCH_VENDOR_FAM_MODEL_FEATURE - Base macro for CPU matching
+ * X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE - Base macro for CPU matching
  * @_vendor:	The vendor name, e.g. INTEL, AMD, HYGON, ..., ANY
  *		The name is expanded to X86_VENDOR_@_vendor
  * @_family:	The family number or X86_FAMILY_ANY
  * @_model:	The model number, model constant or X86_MODEL_ANY
+ * @_steppings:	Bitmask for steppings, stepping constant or X86_STEPPING_ANY
  * @_feature:	A X86_FEATURE bit or X86_FEATURE_ANY
  * @_data:	Driver specific data or NULL. The internal storage
  *		format is unsigned long. The supplied value, pointer
@@ -37,16 +39,35 @@
  * into another macro at the usage site for good reasons, then please
  * start this local macro with X86_MATCH to allow easy grepping.
  */
-#define X86_MATCH_VENDOR_FAM_MODEL_FEATURE(_vendor, _family, _model,	\
-					   _feature, _data) {		\
+#define X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE(_vendor, _family, _model, \
+						    _steppings, _feature, _data) { \
 	.vendor		= X86_VENDOR_##_vendor,				\
 	.family		= _family,					\
 	.model		= _model,					\
+	.steppings	= _steppings,					\
 	.feature	= _feature,					\
 	.driver_data	= (unsigned long) _data				\
 }
 
 /**
+ * X86_MATCH_VENDOR_FAM_MODEL_FEATURE - Macro for CPU matching
+ * @_vendor:	The vendor name, e.g. INTEL, AMD, HYGON, ..., ANY
+ *		The name is expanded to X86_VENDOR_@_vendor
+ * @_family:	The family number or X86_FAMILY_ANY
+ * @_model:	The model number, model constant or X86_MODEL_ANY
+ * @_feature:	A X86_FEATURE bit or X86_FEATURE_ANY
+ * @_data:	Driver specific data or NULL. The internal storage
+ *		format is unsigned long. The supplied value, pointer
+ *		etc. is casted to unsigned long internally.
+ *
+ * The steppings arguments of X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE() is
+ * set to wildcards.
+ */
+#define X86_MATCH_VENDOR_FAM_MODEL_FEATURE(vendor, family, model, feature, data) \
+	X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE(vendor, family, model, \
+						X86_STEPPING_ANY, feature, data)
+
+/**
  * X86_MATCH_VENDOR_FAM_FEATURE - Macro for matching vendor, family and CPU feature
  * @vendor:	The vendor name, e.g. INTEL, AMD, HYGON, ..., ANY
  *		The name is expanded to X86_VENDOR_@vendor
--- a/arch/x86/kernel/cpu/match.c
+++ b/arch/x86/kernel/cpu/match.c
@@ -39,13 +39,18 @@ const struct x86_cpu_id *x86_match_cpu(c
 	const struct x86_cpu_id *m;
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+	for (m = match;
+	     m->vendor | m->family | m->model | m->steppings | m->feature;
+	     m++) {
 		if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
 			continue;
 		if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
 			continue;
 		if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
 			continue;
+		if (m->steppings != X86_STEPPING_ANY &&
+		    !(BIT(c->x86_stepping) & m->steppings))
+			continue;
 		if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
 			continue;
 		return m;
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -663,6 +663,7 @@ struct x86_cpu_id {
 	__u16 vendor;
 	__u16 family;
 	__u16 model;
+	__u16 steppings;
 	__u16 feature;	/* bit index */
 	kernel_ulong_t driver_data;
 };
@@ -671,6 +672,7 @@ struct x86_cpu_id {
 #define X86_VENDOR_ANY 0xffff
 #define X86_FAMILY_ANY 0
 #define X86_MODEL_ANY  0
+#define X86_STEPPING_ANY 0
 #define X86_FEATURE_ANY 0	/* Same as FPU, you can't test for that */
 
 /*

[PATCH 5.7 20/24] x86/cpu: Add table argument to cpu_matches()

[Greg Kroah-Hartman]

From: Mark Gross <mgross@linux.intel.com>

commit 93920f61c2ad7edb01e63323832585796af75fc9 upstream

To make cpu_matches() reusable for other matching tables, have it take a
pointer to a x86_cpu_id table as an argument.

 [ bp: Flip arguments order. ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/common.c |   25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1075,9 +1075,9 @@ static const __initconst struct x86_cpu_
 	{}
 };
 
-static bool __init cpu_matches(unsigned long which)
+static bool __init cpu_matches(const struct x86_cpu_id *table, unsigned long which)
 {
-	const struct x86_cpu_id *m = x86_match_cpu(cpu_vuln_whitelist);
+	const struct x86_cpu_id *m = x86_match_cpu(table);
 
 	return m && !!(m->driver_data & which);
 }
@@ -1097,31 +1097,34 @@ static void __init cpu_set_bug_bits(stru
 	u64 ia32_cap = x86_read_arch_cap_msr();
 
 	/* Set ITLB_MULTIHIT bug if cpu is not in the whitelist and not mitigated */
-	if (!cpu_matches(NO_ITLB_MULTIHIT) && !(ia32_cap & ARCH_CAP_PSCHANGE_MC_NO))
+	if (!cpu_matches(cpu_vuln_whitelist, NO_ITLB_MULTIHIT) &&
+	    !(ia32_cap & ARCH_CAP_PSCHANGE_MC_NO))
 		setup_force_cpu_bug(X86_BUG_ITLB_MULTIHIT);
 
-	if (cpu_matches(NO_SPECULATION))
+	if (cpu_matches(cpu_vuln_whitelist, NO_SPECULATION))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
 
-	if (!cpu_matches(NO_SPECTRE_V2))
+	if (!cpu_matches(cpu_vuln_whitelist, NO_SPECTRE_V2))
 		setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
 
-	if (!cpu_matches(NO_SSB) && !(ia32_cap & ARCH_CAP_SSB_NO) &&
+	if (!cpu_matches(cpu_vuln_whitelist, NO_SSB) &&
+	    !(ia32_cap & ARCH_CAP_SSB_NO) &&
 	   !cpu_has(c, X86_FEATURE_AMD_SSB_NO))
 		setup_force_cpu_bug(X86_BUG_SPEC_STORE_BYPASS);
 
 	if (ia32_cap & ARCH_CAP_IBRS_ALL)
 		setup_force_cpu_cap(X86_FEATURE_IBRS_ENHANCED);
 
-	if (!cpu_matches(NO_MDS) && !(ia32_cap & ARCH_CAP_MDS_NO)) {
+	if (!cpu_matches(cpu_vuln_whitelist, NO_MDS) &&
+	    !(ia32_cap & ARCH_CAP_MDS_NO)) {
 		setup_force_cpu_bug(X86_BUG_MDS);
-		if (cpu_matches(MSBDS_ONLY))
+		if (cpu_matches(cpu_vuln_whitelist, MSBDS_ONLY))
 			setup_force_cpu_bug(X86_BUG_MSBDS_ONLY);
 	}
 
-	if (!cpu_matches(NO_SWAPGS))
+	if (!cpu_matches(cpu_vuln_whitelist, NO_SWAPGS))
 		setup_force_cpu_bug(X86_BUG_SWAPGS);
 
 	/*
@@ -1139,7 +1142,7 @@ static void __init cpu_set_bug_bits(stru
 	     (ia32_cap & ARCH_CAP_TSX_CTRL_MSR)))
 		setup_force_cpu_bug(X86_BUG_TAA);
 
-	if (cpu_matches(NO_MELTDOWN))
+	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 
 	/* Rogue Data Cache Load? No! */
@@ -1148,7 +1151,7 @@ static void __init cpu_set_bug_bits(stru
 
 	setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
 
-	if (cpu_matches(NO_L1TF))
+	if (cpu_matches(cpu_vuln_whitelist, NO_L1TF))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_L1TF);

[PATCH 5.7 21/24] x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation

[Greg Kroah-Hartman]

From: Mark Gross <mgross@linux.intel.com>

commit 7e5b3c267d256822407a22fdce6afdf9cd13f9fb upstream

SRBDS is an MDS-like speculative side channel that can leak bits from the
random number generator (RNG) across cores and threads. New microcode
serializes the processor access during the execution of RDRAND and
RDSEED. This ensures that the shared buffer is overwritten before it is
released for reuse.

While it is present on all affected CPU models, the microcode mitigation
is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the
cases where TSX is not supported or has been disabled with TSX_CTRL.

The mitigation is activated by default on affected processors and it
increases latency for RDRAND and RDSEED instructions. Among other
effects this will reduce throughput from /dev/urandom.

* Enable administrator to configure the mitigation off when desired using
  either mitigations=off or srbds=off.

* Export vulnerability status via sysfs

* Rename file-scoped macros to apply for non-whitelist table initializations.

 [ bp: Massage,
   - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
   - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
   - flip check in cpu_set_bug_bits() to save an indentation level,
   - reflow comments.
   jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
   tglx: Dropped the fused off magic for now
 ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/ABI/testing/sysfs-devices-system-cpu |    1 
 Documentation/admin-guide/kernel-parameters.txt    |   20 +++
 arch/x86/include/asm/cpufeatures.h                 |    2 
 arch/x86/include/asm/msr-index.h                   |    4 
 arch/x86/kernel/cpu/bugs.c                         |  106 +++++++++++++++++++++
 arch/x86/kernel/cpu/common.c                       |   31 ++++++
 arch/x86/kernel/cpu/cpu.h                          |    1 
 drivers/base/cpu.c                                 |    8 +
 8 files changed, 173 insertions(+)

--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -492,6 +492,7 @@ What:		/sys/devices/system/cpu/vulnerabi
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
+		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4757,6 +4757,26 @@
 			the kernel will oops in either "warn" or "fatal"
 			mode.
 
+	srbds=		[X86,INTEL]
+			Control the Special Register Buffer Data Sampling
+			(SRBDS) mitigation.
+
+			Certain CPUs are vulnerable to an MDS-like
+			exploit which can leak bits from the random
+			number generator.
+
+			By default, this issue is mitigated by
+			microcode.  However, the microcode fix can cause
+			the RDRAND and RDSEED instructions to become
+			much slower.  Among other effects, this will
+			result in reduced throughput from /dev/urandom.
+
+			The microcode mitigation can be disabled with
+			the following option:
+
+			off:    Disable mitigation and remove
+				performance impact to RDRAND and RDSEED
+
 	srcutree.counter_wrap_check [KNL]
 			Specifies how frequently to check for
 			grace-period sequence counter wrap for the
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -362,6 +362,7 @@
 #define X86_FEATURE_AVX512_4FMAPS	(18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
 #define X86_FEATURE_FSRM		(18*32+ 4) /* Fast Short Rep Mov */
 #define X86_FEATURE_AVX512_VP2INTERSECT (18*32+ 8) /* AVX-512 Intersect for D/Q */
+#define X86_FEATURE_SRBDS_CTRL		(18*32+ 9) /* "" SRBDS mitigation MSR available */
 #define X86_FEATURE_MD_CLEAR		(18*32+10) /* VERW clears CPU buffers */
 #define X86_FEATURE_TSX_FORCE_ABORT	(18*32+13) /* "" TSX_FORCE_ABORT */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
@@ -407,5 +408,6 @@
 #define X86_BUG_SWAPGS			X86_BUG(21) /* CPU is affected by speculation through SWAPGS */
 #define X86_BUG_TAA			X86_BUG(22) /* CPU is affected by TSX Async Abort(TAA) */
 #define X86_BUG_ITLB_MULTIHIT		X86_BUG(23) /* CPU may incur MCE during certain page attribute changes */
+#define X86_BUG_SRBDS			X86_BUG(24) /* CPU may leak RNG bits if not mitigated */
 
 #endif /* _ASM_X86_CPUFEATURES_H */
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -128,6 +128,10 @@
 #define TSX_CTRL_RTM_DISABLE		BIT(0)	/* Disable RTM feature */
 #define TSX_CTRL_CPUID_CLEAR		BIT(1)	/* Disable TSX enumeration */
 
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL		0x00000123
+#define RNGDS_MITG_DIS			BIT(0)
+
 #define MSR_IA32_SYSENTER_CS		0x00000174
 #define MSR_IA32_SYSENTER_ESP		0x00000175
 #define MSR_IA32_SYSENTER_EIP		0x00000176
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -41,6 +41,7 @@ static void __init l1tf_select_mitigatio
 static void __init mds_select_mitigation(void);
 static void __init mds_print_mitigation(void);
 static void __init taa_select_mitigation(void);
+static void __init srbds_select_mitigation(void);
 
 /* The base value of the SPEC_CTRL MSR that always has to be preserved. */
 u64 x86_spec_ctrl_base;
@@ -108,6 +109,7 @@ void __init check_bugs(void)
 	l1tf_select_mitigation();
 	mds_select_mitigation();
 	taa_select_mitigation();
+	srbds_select_mitigation();
 
 	/*
 	 * As MDS and TAA mitigations are inter-related, print MDS
@@ -398,6 +400,97 @@ static int __init tsx_async_abort_parse_
 early_param("tsx_async_abort", tsx_async_abort_parse_cmdline);
 
 #undef pr_fmt
+#define pr_fmt(fmt)	"SRBDS: " fmt
+
+enum srbds_mitigations {
+	SRBDS_MITIGATION_OFF,
+	SRBDS_MITIGATION_UCODE_NEEDED,
+	SRBDS_MITIGATION_FULL,
+	SRBDS_MITIGATION_TSX_OFF,
+	SRBDS_MITIGATION_HYPERVISOR,
+};
+
+static enum srbds_mitigations srbds_mitigation __ro_after_init = SRBDS_MITIGATION_FULL;
+
+static const char * const srbds_strings[] = {
+	[SRBDS_MITIGATION_OFF]		= "Vulnerable",
+	[SRBDS_MITIGATION_UCODE_NEEDED]	= "Vulnerable: No microcode",
+	[SRBDS_MITIGATION_FULL]		= "Mitigation: Microcode",
+	[SRBDS_MITIGATION_TSX_OFF]	= "Mitigation: TSX disabled",
+	[SRBDS_MITIGATION_HYPERVISOR]	= "Unknown: Dependent on hypervisor status",
+};
+
+static bool srbds_off;
+
+void update_srbds_msr(void)
+{
+	u64 mcu_ctrl;
+
+	if (!boot_cpu_has_bug(X86_BUG_SRBDS))
+		return;
+
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+		return;
+
+	if (srbds_mitigation == SRBDS_MITIGATION_UCODE_NEEDED)
+		return;
+
+	rdmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl);
+
+	switch (srbds_mitigation) {
+	case SRBDS_MITIGATION_OFF:
+	case SRBDS_MITIGATION_TSX_OFF:
+		mcu_ctrl |= RNGDS_MITG_DIS;
+		break;
+	case SRBDS_MITIGATION_FULL:
+		mcu_ctrl &= ~RNGDS_MITG_DIS;
+		break;
+	default:
+		break;
+	}
+
+	wrmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl);
+}
+
+static void __init srbds_select_mitigation(void)
+{
+	u64 ia32_cap;
+
+	if (!boot_cpu_has_bug(X86_BUG_SRBDS))
+		return;
+
+	/*
+	 * Check to see if this is one of the MDS_NO systems supporting
+	 * TSX that are only exposed to SRBDS when TSX is enabled.
+	 */
+	ia32_cap = x86_read_arch_cap_msr();
+	if ((ia32_cap & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM))
+		srbds_mitigation = SRBDS_MITIGATION_TSX_OFF;
+	else if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+		srbds_mitigation = SRBDS_MITIGATION_HYPERVISOR;
+	else if (!boot_cpu_has(X86_FEATURE_SRBDS_CTRL))
+		srbds_mitigation = SRBDS_MITIGATION_UCODE_NEEDED;
+	else if (cpu_mitigations_off() || srbds_off)
+		srbds_mitigation = SRBDS_MITIGATION_OFF;
+
+	update_srbds_msr();
+	pr_info("%s\n", srbds_strings[srbds_mitigation]);
+}
+
+static int __init srbds_parse_cmdline(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!boot_cpu_has_bug(X86_BUG_SRBDS))
+		return 0;
+
+	srbds_off = !strcmp(str, "off");
+	return 0;
+}
+early_param("srbds", srbds_parse_cmdline);
+
+#undef pr_fmt
 #define pr_fmt(fmt)     "Spectre V1 : " fmt
 
 enum spectre_v1_mitigation {
@@ -1528,6 +1621,11 @@ static char *ibpb_state(void)
 	return "";
 }
 
+static ssize_t srbds_show_state(char *buf)
+{
+	return sprintf(buf, "%s\n", srbds_strings[srbds_mitigation]);
+}
+
 static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
 			       char *buf, unsigned int bug)
 {
@@ -1572,6 +1670,9 @@ static ssize_t cpu_show_common(struct de
 	case X86_BUG_ITLB_MULTIHIT:
 		return itlb_multihit_show_state(buf);
 
+	case X86_BUG_SRBDS:
+		return srbds_show_state(buf);
+
 	default:
 		break;
 	}
@@ -1618,4 +1719,9 @@ ssize_t cpu_show_itlb_multihit(struct de
 {
 	return cpu_show_common(dev, attr, buf, X86_BUG_ITLB_MULTIHIT);
 }
+
+ssize_t cpu_show_srbds(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_common(dev, attr, buf, X86_BUG_SRBDS);
+}
 #endif
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1075,6 +1075,27 @@ static const __initconst struct x86_cpu_
 	{}
 };
 
+#define VULNBL_INTEL_STEPPINGS(model, steppings, issues)		   \
+	X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE(INTEL, 6,		   \
+					    INTEL_FAM6_##model, steppings, \
+					    X86_FEATURE_ANY, issues)
+
+#define SRBDS		BIT(0)
+
+static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = {
+	VULNBL_INTEL_STEPPINGS(IVYBRIDGE,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL,		X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL_L,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL_G,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(BROADWELL_G,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(BROADWELL,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(SKYLAKE_L,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(SKYLAKE,		X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(KABYLAKE_L,	X86_STEPPINGS(0x0, 0xC),	SRBDS),
+	VULNBL_INTEL_STEPPINGS(KABYLAKE,	X86_STEPPINGS(0x0, 0xD),	SRBDS),
+	{}
+};
+
 static bool __init cpu_matches(const struct x86_cpu_id *table, unsigned long which)
 {
 	const struct x86_cpu_id *m = x86_match_cpu(table);
@@ -1142,6 +1163,15 @@ static void __init cpu_set_bug_bits(stru
 	     (ia32_cap & ARCH_CAP_TSX_CTRL_MSR)))
 		setup_force_cpu_bug(X86_BUG_TAA);
 
+	/*
+	 * SRBDS affects CPUs which support RDRAND or RDSEED and are listed
+	 * in the vulnerability blacklist.
+	 */
+	if ((cpu_has(c, X86_FEATURE_RDRAND) ||
+	     cpu_has(c, X86_FEATURE_RDSEED)) &&
+	    cpu_matches(cpu_vuln_blacklist, SRBDS))
+		    setup_force_cpu_bug(X86_BUG_SRBDS);
+
 	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 
@@ -1594,6 +1624,7 @@ void identify_secondary_cpu(struct cpuin
 	mtrr_ap_init();
 	validate_apic_and_package_id(c);
 	x86_spec_ctrl_setup_ap();
+	update_srbds_msr();
 }
 
 static __init int setup_noclflush(char *arg)
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -77,6 +77,7 @@ extern void detect_ht(struct cpuinfo_x86
 unsigned int aperfmperf_get_khz(int cpu);
 
 extern void x86_spec_ctrl_setup_ap(void);
+extern void update_srbds_msr(void);
 
 extern u64 x86_read_arch_cap_msr(void);
 
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -562,6 +562,12 @@ ssize_t __weak cpu_show_itlb_multihit(st
 	return sprintf(buf, "Not affected\n");
 }
 
+ssize_t __weak cpu_show_srbds(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Not affected\n");
+}
+
 static DEVICE_ATTR(meltdown, 0444, cpu_show_meltdown, NULL);
 static DEVICE_ATTR(spectre_v1, 0444, cpu_show_spectre_v1, NULL);
 static DEVICE_ATTR(spectre_v2, 0444, cpu_show_spectre_v2, NULL);
@@ -570,6 +576,7 @@ static DEVICE_ATTR(l1tf, 0444, cpu_show_
 static DEVICE_ATTR(mds, 0444, cpu_show_mds, NULL);
 static DEVICE_ATTR(tsx_async_abort, 0444, cpu_show_tsx_async_abort, NULL);
 static DEVICE_ATTR(itlb_multihit, 0444, cpu_show_itlb_multihit, NULL);
+static DEVICE_ATTR(srbds, 0444, cpu_show_srbds, NULL);
 
 static struct attribute *cpu_root_vulnerabilities_attrs[] = {
 	&dev_attr_meltdown.attr,
@@ -580,6 +587,7 @@ static struct attribute *cpu_root_vulner
 	&dev_attr_mds.attr,
 	&dev_attr_tsx_async_abort.attr,
 	&dev_attr_itlb_multihit.attr,
+	&dev_attr_srbds.attr,
 	NULL
 };
 

[PATCH 5.7 22/24] x86/speculation: Add SRBDS vulnerability and mitigation documentation

[Greg Kroah-Hartman]

From: Mark Gross <mgross@linux.intel.com>

commit 7222a1b5b87417f22265c92deea76a6aecd0fb0f upstream

Add documentation for the SRBDS vulnerability and its mitigation.

 [ bp: Massage.
   jpoimboe: sysfs table strings. ]

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/hw-vuln/index.rst                                 |    1 
 Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst |  148 ++++++++++
 2 files changed, 149 insertions(+)
 create mode 100644 Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst

--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -14,3 +14,4 @@ are configurable at compile, boot or run
    mds
    tsx_async_abort
    multihit.rst
+   special-register-buffer-data-sampling.rst
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
@@ -0,0 +1,148 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SRBDS - Special Register Buffer Data Sampling
+=============================================
+
+SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
+infer values returned from special register accesses.  Special register
+accesses are accesses to off core registers.  According to Intel's evaluation,
+the special register reads that have a security expectation of privacy are
+RDRAND, RDSEED and SGX EGETKEY.
+
+When RDRAND, RDSEED and EGETKEY instructions are used, the data is moved
+to the core through the special register mechanism that is susceptible
+to MDS attacks.
+
+Affected processors
+--------------------
+Core models (desktop, mobile, Xeon-E3) that implement RDRAND and/or RDSEED may
+be affected.
+
+A processor is affected by SRBDS if its Family_Model and stepping is
+in the following list, with the exception of the listed processors
+exporting MDS_NO while Intel TSX is available yet not enabled. The
+latter class of processors are only affected when Intel TSX is enabled
+by software using TSX_CTRL_MSR otherwise they are not affected.
+
+  =============  ============  ========
+  common name    Family_Model  Stepping
+  =============  ============  ========
+  Haswell        06_3CH        All
+  Haswell_L      06_45H        All
+  Haswell_G      06_46H        All
+
+  Broadwell_G    06_47H        All
+  Broadwell      06_3DH        All
+
+  Skylake_L      06_4EH        All
+  Skylake        06_5EH        All
+
+  Kabylake_L     06_8EH        <=0xC
+
+  Kabylake       06_9EH        <=0xD
+  =============  ============  ========
+
+Related CVEs
+------------
+
+The following CVE entry is related to this SRBDS issue:
+
+    ==============  =====  =====================================
+    CVE-2020-0543   SRBDS  Special Register Buffer Data Sampling
+    ==============  =====  =====================================
+
+Attack scenarios
+----------------
+An unprivileged user can extract values returned from RDRAND and RDSEED
+executed on another core or sibling thread using MDS techniques.
+
+
+Mitigation mechanism
+-------------------
+Intel will release microcode updates that modify the RDRAND, RDSEED, and
+EGETKEY instructions to overwrite secret special register data in the shared
+staging buffer before the secret data can be accessed by another logical
+processor.
+
+During execution of the RDRAND, RDSEED, or EGETKEY instructions, off-core
+accesses from other logical processors will be delayed until the special
+register read is complete and the secret data in the shared staging buffer is
+overwritten.
+
+This has three effects on performance:
+
+#. RDRAND, RDSEED, or EGETKEY instructions have higher latency.
+
+#. Executing RDRAND at the same time on multiple logical processors will be
+   serialized, resulting in an overall reduction in the maximum RDRAND
+   bandwidth.
+
+#. Executing RDRAND, RDSEED or EGETKEY will delay memory accesses from other
+   logical processors that miss their core caches, with an impact similar to
+   legacy locked cache-line-split accesses.
+
+The microcode updates provide an opt-out mechanism (RNGDS_MITG_DIS) to disable
+the mitigation for RDRAND and RDSEED instructions executed outside of Intel
+Software Guard Extensions (Intel SGX) enclaves. On logical processors that
+disable the mitigation using this opt-out mechanism, RDRAND and RDSEED do not
+take longer to execute and do not impact performance of sibling logical
+processors memory accesses. The opt-out mechanism does not affect Intel SGX
+enclaves (including execution of RDRAND or RDSEED inside an enclave, as well
+as EGETKEY execution).
+
+IA32_MCU_OPT_CTRL MSR Definition
+--------------------------------
+Along with the mitigation for this issue, Intel added a new thread-scope
+IA32_MCU_OPT_CTRL MSR, (address 0x123). The presence of this MSR and
+RNGDS_MITG_DIS (bit 0) is enumerated by CPUID.(EAX=07H,ECX=0).EDX[SRBDS_CTRL =
+9]==1. This MSR is introduced through the microcode update.
+
+Setting IA32_MCU_OPT_CTRL[0] (RNGDS_MITG_DIS) to 1 for a logical processor
+disables the mitigation for RDRAND and RDSEED executed outside of an Intel SGX
+enclave on that logical processor. Opting out of the mitigation for a
+particular logical processor does not affect the RDRAND and RDSEED mitigations
+for other logical processors.
+
+Note that inside of an Intel SGX enclave, the mitigation is applied regardless
+of the value of RNGDS_MITG_DS.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows control over the SRBDS mitigation at boot time
+with the option "srbds=".  The option for this is:
+
+  ============= =============================================================
+  off           This option disables SRBDS mitigation for RDRAND and RDSEED on
+                affected platforms.
+  ============= =============================================================
+
+SRBDS System Information
+-----------------------
+The Linux kernel provides vulnerability status information through sysfs.  For
+SRBDS this can be accessed by the following sysfs file:
+/sys/devices/system/cpu/vulnerabilities/srbds
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable
+ Vulnerable                     Processor vulnerable and mitigation disabled
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: TSX disabled       Processor is only vulnerable when TSX is
+                                enabled while this system was booted with TSX
+                                disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+SRBDS Default mitigation
+------------------------
+This new microcode serializes processor access during execution of RDRAND,
+RDSEED ensures that the shared buffer is overwritten before it is released for
+reuse.  Use the "srbds=off" kernel command line to disable the mitigation for
+RDRAND and RDSEED.

[PATCH 5.7 23/24] x86/speculation: Add Ivy Bridge to affected list

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit 3798cc4d106e91382bfe016caa2edada27c2bb3f upstream

Make the docs match the code.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
+++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
@@ -27,6 +27,8 @@ by software using TSX_CTRL_MSR otherwise
   =============  ============  ========
   common name    Family_Model  Stepping
   =============  ============  ========
+  IvyBridge      06_3AH        All
+
   Haswell        06_3CH        All
   Haswell_L      06_45H        All
   Haswell_G      06_46H        All
@@ -37,9 +39,8 @@ by software using TSX_CTRL_MSR otherwise
   Skylake_L      06_4EH        All
   Skylake        06_5EH        All
 
-  Kabylake_L     06_8EH        <=0xC
-
-  Kabylake       06_9EH        <=0xD
+  Kabylake_L     06_8EH        <= 0xC
+  Kabylake       06_9EH        <= 0xD
   =============  ============  ========
 
 Related CVEs

[PATCH 5.7 24/24] uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

commit 013b2deba9a6b80ca02f4fafd7dedf875e9b4450 upstream.

uprobe_write_opcode() must not cross page boundary; prepare_uprobe()
relies on arch_uprobe_analyze_insn() which should validate "vaddr" but
some architectures (csky, s390, and sparc) don't do this.

We can remove the BUG_ON() check in prepare_uprobe() and validate the
offset early in __uprobe_register(). The new IS_ALIGNED() check matches
the alignment check in arch_prepare_kprobe() on supported architectures,
so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.

Another problem is __update_ref_ctr() which was wrong from the very
beginning, it can read/write outside of kmap'ed page unless "vaddr" is
aligned to sizeof(short), __uprobe_register() should check this too.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/uprobes.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -867,10 +867,6 @@ static int prepare_uprobe(struct uprobe
 	if (ret)
 		goto out;
 
-	/* uprobe_write_opcode() assumes we don't cross page boundary */
-	BUG_ON((uprobe->offset & ~PAGE_MASK) +
-			UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
-
 	smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */
 	set_bit(UPROBE_COPY_INSN, &uprobe->flags);
 
@@ -1166,6 +1162,15 @@ static int __uprobe_register(struct inod
 	if (offset > i_size_read(inode))
 		return -EINVAL;
 
+	/*
+	 * This ensures that copy_from_page(), copy_to_page() and
+	 * __update_ref_ctr() can't cross page boundary.
+	 */
+	if (!IS_ALIGNED(offset, UPROBE_SWBP_INSN_SIZE))
+		return -EINVAL;
+	if (!IS_ALIGNED(ref_ctr_offset, sizeof(short)))
+		return -EINVAL;
+
  retry:
 	uprobe = alloc_uprobe(inode, offset, ref_ctr_offset);
 	if (!uprobe)
@@ -2014,6 +2019,9 @@ static int is_trap_at_addr(struct mm_str
 	uprobe_opcode_t opcode;
 	int result;
 
+	if (WARN_ON_ONCE(!IS_ALIGNED(vaddr, UPROBE_SWBP_INSN_SIZE)))
+		return -EINVAL;
+
 	pagefault_disable();
 	result = __get_user(opcode, (uprobe_opcode_t __user *)vaddr);
 	pagefault_enable();

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Naresh Kamboju]

On Tue, 9 Jun 2020 at 23:25, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.7.2 release.
> There are 24 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.7.2-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.7.y
git commit: 00f7cc67908be43cf52f961c4c880108b00d68e8
git describe: v5.7.1-25-g00f7cc67908b
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.7-oe/build/v5.7.1-25-g00f7cc67908b

No regressions (compared to build v5.7-15-g676bb83805a9)

No fixes (compared to build v5.7-15-g676bb83805a9)


Ran 36794 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-sched-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* libgpiod
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-open-posix-tests
* network-basic-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Greg Kroah-Hartman]

On Wed, Jun 10, 2020 at 11:47:30AM +0530, Naresh Kamboju wrote:
> On Tue, 9 Jun 2020 at 23:25, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.7.2 release.
> > There are 24 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Jon Hunter]

On 09/06/2020 18:45, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.7.2 release.
> There are 24 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.7:
    11 builds:	11 pass, 0 fail
    26 boots:	26 pass, 0 fail
    50 tests:	50 pass, 0 fail

Linux version:	5.7.2-rc1-g00f7cc67908b
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Greg Kroah-Hartman]

On Wed, Jun 10, 2020 at 12:30:28PM +0100, Jon Hunter wrote:
> 
> On 09/06/2020 18:45, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.7.2 release.
> > There are 24 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests are passing for Tegra ...
> 
> Test results for stable-v5.7:
>     11 builds:	11 pass, 0 fail
>     26 boots:	26 pass, 0 fail
>     50 tests:	50 pass, 0 fail
> 
> Linux version:	5.7.2-rc1-g00f7cc67908b
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra210-p3450-0000,
>                 tegra30-cardhu-a04

Wonderful, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Shuah Khan]

On 6/9/20 11:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.7.2 release.
> There are 24 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.7.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.7.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Guenter Roeck]

On Tue, Jun 09, 2020 at 07:45:31PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.7.2 release.
> There are 24 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 431 pass: 431 fail: 0

Guenter

Re: [PATCH 5.7 00/24] 5.7.2-rc1 review

[Greg Kroah-Hartman]

On Wed, Jun 10, 2020 at 12:11:33PM -0700, Guenter Roeck wrote:
> On Tue, Jun 09, 2020 at 07:45:31PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.7.2 release.
> > There are 24 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu, 11 Jun 2020 17:41:38 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 155 pass: 155 fail: 0
> Qemu test results:
> 	total: 431 pass: 431 fail: 0

Thanks for testing all of these and letting me know.

greg k-h