* [PATCH v5] ath10k: provide survey info as accumulated data
@ 2020-06-14 11:26 Sven Eckelmann
0 siblings, 0 replies; only message in thread
From: Sven Eckelmann @ 2020-06-14 11:26 UTC (permalink / raw)
To: ath10k
Cc: linux-kernel, Venkateswara Naralasetty, Markus Theil, John Deere,
Sven Eckelmann
From: Venkateswara Naralasetty <vnaralas@codeaurora.org>
It is expected that the returned counters by .get_survey are monotonic
increasing. But the data from ath10k gets reset to zero regularly. Channel
active/busy time are then showing incorrect values (less than previous or
sometimes zero) for the currently active channel during successive survey
dump commands.
example:
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 54995 ms
channel busy time: 432 ms
channel receive time: 0 ms
channel transmit time: 59 ms
...
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 32592 ms
channel busy time: 254 ms
channel receive time: 0 ms
channel transmit time: 0 ms
...
The correct way to handle this is to use the non-clearing
WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will
then accumulate the survey data and handle wrap arounds.
Tested on:
* QCA9984 hw1.0 firmware 10.4-3.5.3-00057
* QCA988X hw2.0 firmware 10.2.4-1.0-00047
* QCA9888 hw2.0 firmware 10.4-3.9.0.2-00024
* QCA4019 hw1.0 firmware 10.4-3.6-00140
Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information")
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Tested-by: Markus Theil <markus.theil@tu-ilmenau.de>
Tested-by: John Deere <24601deerej@gmail.com>
[sven@narfation.org: adjust commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
v5:
* add additional tested devices
* restructure commit message
v4:
* updated signed-off-by
v3:
* Rebased on TOT and added Tested-by
Everything expect QCA9984 hw1.0 firmware 10.4-3.5.3-00057 was also tested
by me.
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 919d15584d4a..77daca67a8e1 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7283,7 +7283,7 @@ ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
struct ieee80211_channel *channel)
{
int ret;
- enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
+ enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
lockdep_assert_held(&ar->conf_mutex);
--
2.20.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-06-14 11:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-14 11:26 [PATCH v5] ath10k: provide survey info as accumulated data Sven Eckelmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).