[PATCH v1] doc: devicetree: bindings: fix spelling mistake

[PATCH v1] doc: devicetree: bindings: fix spelling mistake

[Flavio Suligoi]

Fix typo: "triger" --> "trigger"

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Acked-by: Guo Ren <guoren@kernel.org>
---

v1: add Acked-by: Guo Ren <guoren@kernel.org>

 Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +-
 .../devicetree/bindings/interrupt-controller/csky,mpintc.txt    | 2 +-
 Documentation/devicetree/bindings/timer/csky,mptimer.txt        | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
index ba455589f869..e1c49b660d3a 100644
--- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
@@ -12,7 +12,7 @@ Required properties for the top level node:
    Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
 - #interrupt-cells : Specifies the number of cells needed to encode an
    interrupt. Should be 2. The first cell defines the interrupt number,
-   the second encodes the triger flags encoded as described in
+   the second encodes the trigger flags encoded as described in
    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - compatible:
   - "mediatek,mt7621-gpio" for Mediatek controllers
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index e13405355166..e6bbcae4d07f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -10,7 +10,7 @@ Interrupt number definition:
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
  IRQ_TYPE_LEVEL_HIGH (default)
  IRQ_TYPE_LEVEL_LOW
  IRQ_TYPE_EDGE_RISING
diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
index 15cfec08fbb8..f5c7e99cf52b 100644
--- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt
+++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
@@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
  - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
  - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
  - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
 
 ==============================
 timer node bindings definition
-- 
2.17.1

Re: [PATCH v1] doc: devicetree: bindings: fix spelling mistake

[Rob Herring]

On Mon, 15 Jun 2020 09:58:35 +0200, Flavio Suligoi wrote:
> Fix typo: "triger" --> "trigger"
> 
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> Acked-by: Guo Ren <guoren@kernel.org>
> ---
> 
> v1: add Acked-by: Guo Ren <guoren@kernel.org>
> 
>  Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 2 +-
>  .../devicetree/bindings/interrupt-controller/csky,mpintc.txt    | 2 +-
>  Documentation/devicetree/bindings/timer/csky,mptimer.txt        | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 

Applied, thanks!